KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21639 commits 3 branches 0 tags 154 MiB
Commit graph

8898 commits

Author SHA1 Message Date
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
 2012-07-26 15:42:18 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
 2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk 
SVN-Revision: 32865
 2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk 
SVN-Revision: 32864
 2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk 
SVN-Revision: 32863
 2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk 
SVN-Revision: 32862
 2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk 
SVN-Revision: 32861
 2012-07-25 15:50:33 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk 
SVN-Revision: 32859
 2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk 
SVN-Revision: 32858
 2012-07-25 15:50:23 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk 
SVN-Revision: 32856
 2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk 
SVN-Revision: 32855
 2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk 
SVN-Revision: 32854
 2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules 
SVN-Revision: 32853
 2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk 
SVN-Revision: 32852
 2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
SVN-Revision: 32845
 2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol 
SVN-Revision: 32844
 2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages 
SVN-Revision: 32843
 2012-07-25 14:01:54 +00:00
Florian Fainelli
ba9f6a46b1 remove broken flag 
SVN-Revision: 32842
 2012-07-25 14:01:51 +00:00
Florian Fainelli
03c06178e3 package buttons driver separately 
SVN-Revision: 32841
 2012-07-25 14:01:49 +00:00
Florian Fainelli
83b7462ac9 package cobalt lcd as a module 
SVN-Revision: 32840
 2012-07-25 14:01:46 +00:00
John Crispin
7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds 
SVN-Revision: 32836
 2012-07-25 09:05:23 +00:00
John Crispin
94a550cc87 cleanup config-3.3, remove =m 
SVN-Revision: 32835
 2012-07-25 09:05:18 +00:00
John Crispin
1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration 
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
 2012-07-25 08:01:38 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi 
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
 2012-07-24 20:39:17 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode 
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
 2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support 
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
 2012-07-24 20:38:43 +00:00
John Crispin
b891eec700 MI424WR - add rev D support 
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
 2012-07-24 20:38:36 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n 
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
 2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support 
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
 2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. 
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
 2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002 
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
 2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel 
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
 2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz 
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
 2012-07-24 20:37:50 +00:00
Florian Fainelli
93dc8c8d1b move omap specific modules to modules.mk 
SVN-Revision: 32810
 2012-07-24 19:43:54 +00:00
Florian Fainelli
82c7e05d42 move n810 battery module to omap24 modules.mk 
SVN-Revision: 32809
 2012-07-24 19:43:49 +00:00
Florian Fainelli
25e20b0b57 move target specific modules to target's module.mk 
SVN-Revision: 32808
 2012-07-24 19:43:45 +00:00
Florian Fainelli
587f85ac20 package ep93xx framebuffer 
SVN-Revision: 32807
 2012-07-24 19:43:35 +00:00
Florian Fainelli
5915c85d80 remove crypto symbols override 
SVN-Revision: 32806
 2012-07-24 19:43:31 +00:00
Florian Fainelli
c238862651 add missing framebuffer related symbols 
SVN-Revision: 32804
 2012-07-24 19:43:23 +00:00
Florian Fainelli
9f55e6f954 remove broken flag, since it works 
SVN-Revision: 32803
 2012-07-24 19:43:19 +00:00
Florian Fainelli
c531ce0301 fix sound modules loading order and dependencies 
SVN-Revision: 32802
 2012-07-24 19:43:15 +00:00
Florian Fainelli
598ef2a2e0 package ep93xx touchscreen driver as a module 
SVN-Revision: 32799
 2012-07-24 19:42:49 +00:00
Florian Fainelli
0db5f35846 set DEVICE_TYPE to developerboard 
SVN-Revision: 32798
 2012-07-24 19:42:44 +00:00
John Crispin
5178c177dc rebase config-3.3 
SVN-Revision: 32797
 2012-07-24 17:28:25 +00:00
John Crispin
53a6946bb4 fix tantos patch properly 
SVN-Revision: 32796
 2012-07-24 17:28:12 +00:00
John Crispin
6fe32d72a2 make tantos switch select ETHERNET_PACKET_MANGLE 
SVN-Revision: 32795
 2012-07-24 16:50:14 +00:00
John Crispin
48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file 
This broke falcon builds

SVN-Revision: 32794
 2012-07-24 15:33:01 +00:00
Felix Fietkau
b59bc92c6e crashlog: fix dependency, add memblock support 
SVN-Revision: 32787
 2012-07-22 16:39:33 +00:00
Felix Fietkau
b1f318de53 kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x 
SVN-Revision: 32783
 2012-07-20 12:28:50 +00:00
Florian Fainelli
05340cc602 rename upgrade image to sysupgrade.bin for consistency 
SVN-Revision: 32770
 2012-07-17 16:47:57 +00:00
Florian Fainelli
d243c1e1f2 add missing configuration symbols 
SVN-Revision: 32769
 2012-07-17 16:40:28 +00:00
Florian Fainelli
f7dfd20f97 au1000: implement sysupgrade platform.sh 
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32768
 2012-07-17 16:40:24 +00:00
Florian Fainelli
ac6bf6d62f au1000: clean up profiles 
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32767
 2012-07-17 16:39:52 +00:00
Florian Fainelli
b2d76e1e05 au1000: fix InternetBox idsel and remove broken flag 
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.

Also remove platform broken flag, it works.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32766
 2012-07-17 16:39:47 +00:00
Gabor Juhos
21de1b9d85 ar71xx: enable I2C_GPIO, the PB44 board needs that 
SVN-Revision: 32738
 2012-07-15 17:52:52 +00:00
Gabor Juhos
7daf851adf ar71xx: fix PB44 board detection 
SVN-Revision: 32737
 2012-07-15 17:52:50 +00:00
Gabor Juhos
c7fa38484c ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi 
SVN-Revision: 32736
 2012-07-15 17:52:48 +00:00
Luka Perkov
03a6d65c37 kernel: add Marvell SoC built-in RTC to modules 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
 2012-07-15 14:25:30 +00:00
Florian Fainelli
c727c2aacf set DEVICE_TYPE to other to avoid pulling unecessary packages 
SVN-Revision: 32731
 2012-07-15 14:10:03 +00:00
Florian Fainelli
a5d72815b5 add compatible property to pci node 
SVN-Revision: 32730
 2012-07-15 14:09:40 +00:00
Florian Fainelli
b5578d83d5 use ohci_err() instead of err() 
SVN-Revision: 32729
 2012-07-15 14:09:32 +00:00
Florian Fainelli
0e0b396663 make sure we properly unmap DMA mappings we created 
SVN-Revision: 32728
 2012-07-15 14:09:24 +00:00
Florian Fainelli
0f0e42f28e nuport-mac: add definitions of the various bits/masks used 
SVN-Revision: 32727
 2012-07-15 14:09:18 +00:00
Luka Perkov
c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
 2012-07-15 12:18:29 +00:00
Luka Perkov
952ce3473d kirkwood: revert config changes from r32053 
SVN-Revision: 32719
 2012-07-15 00:08:52 +00:00
Gabor Juhos
33220828dc ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

SVN-Revision: 32683
 2012-07-12 13:38:40 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N 
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
 2012-07-12 13:29:46 +00:00
Gabor Juhos
e9af340016 generic: ocf: restore terminating entry of pci_id_table in hifnHIPP 
SVN-Revision: 32680
 2012-07-12 08:34:23 +00:00
Gabor Juhos
d3c8852fd1 ar71xx: select ATH79_DEV_M25P80 for the WRT400N board 
SVN-Revision: 32679
 2012-07-12 08:34:22 +00:00
Gabor Juhos
c75c895d24 ar71xx: airrouter power led support 
This patch adds support for power led to Unifi Airrouter AP.

[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32678
 2012-07-12 08:34:21 +00:00
Gabor Juhos
466f010303 ar71xx: unifi reset button support 
This patch adds support for reset button to Ubiquiti UniFi AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32677
 2012-07-12 08:34:20 +00:00
Gabor Juhos
5ce9c90ca8 ar71xx: airrouter reset button support 
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32676
 2012-07-12 08:34:18 +00:00
Luka Perkov
283021ac15 ocf: update to version 20120127 
SVN-Revision: 32672
 2012-07-11 23:38:14 +00:00
Hauke Mehrtens
45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11 
SVN-Revision: 32670
 2012-07-11 22:17:05 +00:00
Florian Fainelli
b94d9eb302 remove bcm63xx_pci_register() call in livebox board 
SVN-Revision: 32661
 2012-07-11 09:15:26 +00:00
Florian Fainelli
f8446c3d4c use physmap-flash on livebox (#8677) 
SVN-Revision: 32660
 2012-07-11 09:15:22 +00:00
Florian Fainelli
8765e49fbe nuport-mac: check netif_receive_skb() return value 
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

SVN-Revision: 32659
 2012-07-11 08:29:01 +00:00
Florian Fainelli
93bf00ff36 fix typo on of_node_put() 
SVN-Revision: 32653
 2012-07-09 14:44:15 +00:00
Florian Fainelli
bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
 2012-07-06 22:10:37 +00:00
Gabor Juhos
fe015f399f ar71xx: swizzle address for PCI byte/word access on AR71xx 
Closes #11683.

SVN-Revision: 32639
 2012-07-06 16:33:12 +00:00
Gabor Juhos
b39df5bb81 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board 
SVN-Revision: 32638
 2012-07-06 11:12:02 +00:00
Gabor Juhos
e258367c19 ar71xx: merge new board patches into the generic patch 
SVN-Revision: 32637
 2012-07-06 11:12:01 +00:00
Gabor Juhos
b020a7e7c3 ar71xx: OM2P LC sysupgrade patch 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32635
 2012-07-06 11:11:58 +00:00
Florian Fainelli
110fd3525a call of_node_put() on ethernet node 
SVN-Revision: 32628
 2012-07-05 18:46:55 +00:00
Florian Fainelli
a8fab2cb78 fix EPHY clock bit definition after r32489 
SVN-Revision: 32627
 2012-07-05 18:46:52 +00:00
Florian Fainelli
81681d7367 give an unique partition identifier for dLAN USB Extender Combined partition 
SVN-Revision: 32626
 2012-07-05 18:46:48 +00:00
Gabor Juhos
eabf96dc22 ar71xx: set firmware version for the TL-WR2543N 
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

SVN-Revision: 32617
 2012-07-05 16:25:31 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
 2012-07-05 16:25:26 +00:00
Gabor Juhos
b2f0476871 ar71xx: OM2P sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32613
 2012-07-05 08:26:57 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
 2012-07-05 08:26:53 +00:00
Gabor Juhos
1ea2a3cfd8 ar71xx: add profile and build image for the Atheros AP136 reference board 
SVN-Revision: 32609
 2012-07-05 08:26:51 +00:00
Gabor Juhos
b219848bfc ar71xx: AP136 user-space support 
SVN-Revision: 32608
 2012-07-05 08:26:50 +00:00
Gabor Juhos
f0cda65bb6 ar71xx: add initial support for the Qualcomm Atheros AP136 board 
SVN-Revision: 32607
 2012-07-05 08:26:48 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs 
SVN-Revision: 32606
 2012-07-05 08:26:47 +00:00
Gabor Juhos
7284cf73d6 ar71xx: refactor PCI code to allow registering multiple PCI controllers 
SVN-Revision: 32605
 2012-07-05 08:26:45 +00:00
Gabor Juhos
6b8392eb12 generic: ar8216: start aneg on each PHY of the AR8327 
SVN-Revision: 32604
 2012-07-05 08:26:39 +00:00
Florian Fainelli
0fdac1102d add missing interrupts properties to some device nodes 
SVN-Revision: 32603
 2012-07-04 19:37:11 +00:00
Felix Fietkau
bfef2d17eb ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW) 
SVN-Revision: 32599
 2012-07-04 10:55:56 +00:00
Jonas Gorski
0a3e9c3148 bcm63xx: bcm63xx-spi does not depend on spi-bitbang 
SVN-Revision: 32594
 2012-07-03 21:42:17 +00:00
Jonas Gorski
fad888a85c bcm63xx: 96348A-122 improvements (Comtrend 5365) 
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32593
 2012-07-03 21:42:15 +00:00
Jonas Gorski
0c7e676342 bcm63xx: fix second caldata address calculation 
thanks Noltari for spotting this.

SVN-Revision: 32592
 2012-07-03 21:42:12 +00:00
Jonas Gorski
988147111c bcm63xx: update patches to latest upstream versions 
SVN-Revision: 32591
 2012-07-03 21:42:07 +00:00
Jonas Gorski
1e2262df76 kernel: generic: spi: allow empty (un)prepare transfer 
SVN-Revision: 32590
 2012-07-03 21:42:03 +00:00
Gabor Juhos
b8618fd3f2 ar71xx: improve MDIO busy wait code 
SVN-Revision: 32586
 2012-07-03 15:24:02 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
 2012-07-03 15:24:01 +00:00
Florian Fainelli
4cdc4b1f36 refresh patches 
SVN-Revision: 32581
 2012-07-03 09:45:46 +00:00
Hauke Mehrtens
bd9fa13c73 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02 
SVN-Revision: 32580
 2012-07-02 23:12:58 +00:00
Florian Fainelli
52bae2d2bd fix watchdog and rng drivers section mismatch (#11767) 
SVN-Revision: 32522
 2012-06-29 09:07:54 +00:00
Felix Fietkau
5570b76642 ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762) 
SVN-Revision: 32520
 2012-06-28 16:05:08 +00:00
Felix Fietkau
a5c684de26 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht) 
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

SVN-Revision: 32514
 2012-06-27 22:32:47 +00:00
Florian Fainelli
1d7878a38b fix SPI clock frequency selection 
SVN-Revision: 32512
 2012-06-27 22:14:50 +00:00
Felix Fietkau
41909c6568 kernel: add missing config symbol 
SVN-Revision: 32498
 2012-06-24 20:21:27 +00:00
Vasilis Tsiligiannis
eee358338c ramips: mac address detection for Fonera 2.0n 
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
 2012-06-23 13:58:29 +00:00
Florian Fainelli
81e8757da4 provide an early ioremap cookie of the system configuration register 
SVN-Revision: 32489
 2012-06-23 11:03:50 +00:00
Florian Fainelli
98b2bc9189 group SYSDBG register defines in mcs814x.h 
SVN-Revision: 32488
 2012-06-23 11:03:45 +00:00
Florian Fainelli
a8965f0005 make hardware.h a forward inclusion of mcs814x.h 
mach/hardware.h is soon to be removed by upstream kernel

SVN-Revision: 32487
 2012-06-23 11:03:40 +00:00
Florian Fainelli
7c984552ed remove platform specific initialization from ethernet driver 
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.

SVN-Revision: 32486
 2012-06-23 11:03:35 +00:00
Florian Fainelli
2c47bbc199 regroup interrupt controller register definitions in hardware.h 
SVN-Revision: 32485
 2012-06-23 11:03:29 +00:00
Florian Fainelli
481c9faf20 remove handle_irq callback in board-mcs8140-dt.c 
This should have been removed in r32470.

SVN-Revision: 32481
 2012-06-21 12:20:47 +00:00
Florian Fainelli
4b33e0996e fix USB led triggers 
SVN-Revision: 32474
 2012-06-20 21:58:00 +00:00
Florian Fainelli
a98c74164e use generic uci defaults functions 
SVN-Revision: 32473
 2012-06-20 21:57:56 +00:00
Florian Fainelli
007fa4d638 remove uselss cache invalidations 
SVN-Revision: 32472
 2012-06-20 21:57:53 +00:00
Florian Fainelli
9a2367aa6d improve ethernet driver debugging 
SVN-Revision: 32471
 2012-06-20 21:57:49 +00:00
Florian Fainelli
3b0dba382b do not use MULTI_IRQ_HANDLER it is bogus on our platform 
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

SVN-Revision: 32470
 2012-06-20 21:57:45 +00:00
Mirko Vogt
f45cd30543 verified to work - remove broken flag 
SVN-Revision: 32469
 2012-06-20 19:04:35 +00:00
Vasilis Tsiligiannis
1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images 
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
 2012-06-19 22:36:53 +00:00
Florian Fainelli
f4afa00862 add Moschip MSC814x support 
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.

Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core

Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832

SVN-Revision: 32462
 2012-06-19 14:48:56 +00:00
Gabor Juhos
7c87391c55 ar71xx: create profile and build image for the TL-WDR4300 board 
SVN-Revision: 32461
 2012-06-19 11:51:20 +00:00
Gabor Juhos
2d97a52045 ar71xx: add user space support for the TL-WDR4300 
SVN-Revision: 32460
 2012-06-19 11:51:18 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board 
SVN-Revision: 32459
 2012-06-19 11:51:17 +00:00
Gabor Juhos
e6a10d5cdd ar71xx: refresh patches 
SVN-Revision: 32458
 2012-06-19 11:51:15 +00:00
Gabor Juhos
86c6543259 ar71xx: make AR8327 LEDs working on the DB120 board 
SVN-Revision: 32457
 2012-06-19 10:44:17 +00:00
Gabor Juhos
b934fa2f16 generic: ar8216: allow to configure AR8327 LEDs via platform data 
SVN-Revision: 32456
 2012-06-19 10:44:16 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
SVN-Revision: 32455
 2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Gabor Juhos
27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC 
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
 2012-06-19 10:13:38 +00:00
Gabor Juhos
ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC 
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
 2012-06-19 10:13:37 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router 
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
 2012-06-19 09:52:15 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x 
SVN-Revision: 32446
 2012-06-19 00:21:58 +00:00
Jo-Philipp Wich
f06473f8ff optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
 2012-06-18 23:36:50 +00:00
Jo-Philipp Wich
cbac321164 remove inittab override 
SVN-Revision: 32422
 2012-06-18 11:50:37 +00:00
Florian Fainelli
b89c81929e fix SPI message control handling for BCM6338/6348 
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
 2012-06-17 16:17:29 +00:00
Felix Fietkau
50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets 
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
 2012-06-16 21:06:33 +00:00
Florian Fainelli
b391548cf0 remove broken flags 
Thanks to Nicolas Le Falher for testing on Bifferboard.

SVN-Revision: 32389
 2012-06-16 16:45:28 +00:00
Jo-Philipp Wich
e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests 
SVN-Revision: 32384
 2012-06-15 12:59:49 +00:00
Luka Perkov
1c80d9f21d kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
 2012-06-13 18:41:42 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Jonas Gorski
f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver 
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
 2012-06-11 22:24:58 +00:00
Felix Fietkau
7cb42738e6 package/index: filter out the libc package from the index 
SVN-Revision: 32187
 2012-06-11 01:29:11 +00:00
Luka Perkov
be5229f0ba kirkwood: ib62x0 fix reboot 
SVN-Revision: 32131
 2012-06-08 23:17:46 +00:00
Felix Fietkau
43b5706ef5 xburst: remove an obsolete CompareKernelPatchVer call 
SVN-Revision: 32115
 2012-06-07 16:32:44 +00:00
Florian Fainelli
6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled 
SVN-Revision: 32096
 2012-06-06 20:58:45 +00:00
Felix Fietkau
624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
SVN-Revision: 32095
 2012-06-06 19:37:49 +00:00
Felix Fietkau
8b46a72583 kernel: add a few more tracing related symbols 
SVN-Revision: 32094
 2012-06-06 18:04:00 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
072bed4760 target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install 
SVN-Revision: 32091
 2012-06-06 17:24:05 +00:00
Felix Fietkau
02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
SVN-Revision: 32090
 2012-06-06 17:24:01 +00:00
Florian Fainelli
4c25e42fa8 fix alarm led color for board 96348A-122 
SVN-Revision: 32089
 2012-06-06 16:07:46 +00:00
Florian Fainelli
2f63f097de add 96348w3 board (#10764) 
SVN-Revision: 32088
 2012-06-06 15:45:04 +00:00
Florian Fainelli
9d38989d1f update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
 2012-06-06 15:44:56 +00:00
Florian Fainelli
c69a2cdfbb fix leds naming for all bcm63xx boards 
SVN-Revision: 32086
 2012-06-06 15:44:52 +00:00
Felix Fietkau
ce1d4d7ee9 kernel: make tracing support configurable 
SVN-Revision: 32085
 2012-06-06 15:25:57 +00:00
Florian Fainelli
23fc737b9d backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
 2012-06-06 13:31:33 +00:00
Florian Fainelli
7b12e9e49c backport spi message queue infrastructure 
SVN-Revision: 32077
 2012-06-06 13:31:30 +00:00
Florian Fainelli
4112094dbb increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

SVN-Revision: 32076
 2012-06-06 13:31:24 +00:00
John Crispin
95e69ac4f1 clean up generic image building 
SVN-Revision: 32065
 2012-06-05 17:49:42 +00:00
Florian Fainelli
9a61b249c5 fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
 2012-06-05 13:40:41 +00:00
Florian Fainelli
5ec2209734 refresh generic patches 
SVN-Revision: 32059
 2012-06-05 13:40:38 +00:00
Florian Fainelli
36c99bcc42 fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
 2012-06-05 13:40:35 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Luka Perkov
605012ad5d kirkwood: reorganize target 
SVN-Revision: 32053
 2012-06-05 00:43:56 +00:00
Luka Perkov
7f00e5ffc6 uboot-envtools: update to 2012.04.01 
SVN-Revision: 32051
 2012-06-04 21:55:49 +00:00
Jonas Gorski
ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

SVN-Revision: 32041
 2012-06-04 08:35:25 +00:00
John Crispin
2b4ef2eafa adds unset Kbuild symbol 
SVN-Revision: 32026
 2012-06-02 14:03:32 +00:00
Gabor Juhos
f4b02b91ce malta: remove 3.2 patches 
SVN-Revision: 32023
 2012-06-02 12:06:28 +00:00
Gabor Juhos
c0c60f7bd3 malta: use common kernel config 
SVN-Revision: 32022
 2012-06-02 12:06:26 +00:00
Gabor Juhos
9375e83586 xburst: add missing config symbol 
SVN-Revision: 32021
 2012-06-02 12:06:15 +00:00
John Crispin
76e4cd2a24 add $(SUBTARGET) to the filename if available 
SVN-Revision: 32007
 2012-05-30 18:04:15 +00:00
John Crispin
47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again 
SVN-Revision: 32006
 2012-05-30 17:41:28 +00:00
Jonas Gorski
3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
 2012-05-30 10:27:46 +00:00
Jonas Gorski
c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V 
SVN-Revision: 32003
 2012-05-30 10:27:42 +00:00
Gabor Juhos
9e02593b70 generic: ar8216: add revision specific PHY fixups for AR8327 
SVN-Revision: 32000
 2012-05-29 16:39:27 +00:00
Gabor Juhos
0d241e6670 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv 
SVN-Revision: 31999
 2012-05-29 16:39:26 +00:00
Gabor Juhos
b2fce19a70 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers 
SVN-Revision: 31998
 2012-05-29 16:39:24 +00:00
Gabor Juhos
cd7ab1d30b ar71xx: add default LED setup for the DB120 board 
SVN-Revision: 31997
 2012-05-29 16:39:23 +00:00
Gabor Juhos
29a579e43a cns21xx: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31996
 2012-05-29 16:39:22 +00:00
Gabor Juhos
ff74305623 lantiq: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31995
 2012-05-29 16:39:21 +00:00
Gabor Juhos
c81c6516de kirkwood: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31994
 2012-05-29 16:39:20 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31993
 2012-05-29 16:39:18 +00:00
Gabor Juhos
4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31992
 2012-05-29 16:39:17 +00:00
Gabor Juhos
ba3ad24514 kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
 2012-05-29 16:39:15 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
 2012-05-29 16:39:03 +00:00
Felix Fietkau
a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
SVN-Revision: 31956
 2012-05-28 20:39:50 +00:00
Felix Fietkau
367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
SVN-Revision: 31934
 2012-05-28 02:55:59 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
SVN-Revision: 31925
 2012-05-27 21:02:41 +00:00
Felix Fietkau
f638414fdc kernel: fix suppressing -s for linking modules when profiling is enabled 
SVN-Revision: 31924
 2012-05-27 21:02:36 +00:00
Gabor Juhos
8865f0923e ar71xx: fix TL-WR1041 image size 
SVN-Revision: 31923
 2012-05-27 17:21:47 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller 
SVN-Revision: 31922
 2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883 
SVN-Revision: 31921
 2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins 
SVN-Revision: 31920
 2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment 
SVN-Revision: 31919
 2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet 
SVN-Revision: 31918
 2012-05-27 17:09:50 +00:00
Gabor Juhos
86dad96fd0 generic: rtl8367: rename a misnamed variable 
SVN-Revision: 31917
 2012-05-27 17:09:47 +00:00
Gabor Juhos
705d31203c generic: rtl8366_smi: remove duplicated spinlock initialization 
SVN-Revision: 31916
 2012-05-27 17:09:45 +00:00
Gabor Juhos
9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol 
SVN-Revision: 31915
 2012-05-27 17:09:43 +00:00
Gabor Juhos
466ef30173 generic: rtl8367: allow to use VLANs > 31 
SVN-Revision: 31914
 2012-05-27 17:09:41 +00:00
John Crispin
f567980d38 move files-3.3 -> files 
SVN-Revision: 31912
 2012-05-27 16:13:02 +00:00
John Crispin
8002770520 3.2 R.I.P. 
SVN-Revision: 31911
 2012-05-27 16:12:59 +00:00
John Crispin
81ddc886e1 dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
 2012-05-27 16:02:22 +00:00
John Crispin
6e8fe84472 fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
 2012-05-27 16:02:20 +00:00
John Crispin
3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
 2012-05-27 16:02:16 +00:00
Felix Fietkau
51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD 
SVN-Revision: 31906
 2012-05-27 15:16:37 +00:00
Gabor Juhos
0b8c1c8dfb linux/3.2: R.I.P. 
SVN-Revision: 31905
 2012-05-27 15:01:37 +00:00
Gabor Juhos
20ba6d90e3 xburst: remove support for old kernels 
SVN-Revision: 31904
 2012-05-27 15:01:35 +00:00
Gabor Juhos
d043cb2c34 xburst: switch to 3.3 and add broken flag 
SVN-Revision: 31903
 2012-05-27 15:01:33 +00:00
Gabor Juhos
9a26e9f843 xburst: add support for 3.3 
SVN-Revision: 31902
 2012-05-27 15:01:32 +00:00
Gabor Juhos
9dd7a6d9e2 ppc44x: remove 3.2 support 
SVN-Revision: 31901
 2012-05-27 15:01:30 +00:00
Gabor Juhos
05d74942b1 ppx44x: switch to 3.3 and add broken flag 
SVN-Revision: 31900
 2012-05-27 15:01:28 +00:00
Gabor Juhos
9300e0496c ppc44x: add support for 3.3 
Compile tested only.

SVN-Revision: 31899
 2012-05-27 15:01:27 +00:00
Gabor Juhos
c50f1f7536 cobalt: switch to 3.3 and add broken flag 
Compile tested only.

SVN-Revision: 31898
 2012-05-27 15:01:26 +00:00
Gabor Juhos
471cf87ff0 ep93xx: remove 3.2 support 
SVN-Revision: 31897
 2012-05-27 15:01:24 +00:00
Gabor Juhos
400b9b5b87 ep93xx: switch to 3.3 and add broken flag 
SVN-Revision: 31896
 2012-05-27 15:01:23 +00:00
Gabor Juhos
7501f2364f ep93xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31895
 2012-05-27 15:01:21 +00:00
Gabor Juhos
907e88a37f au1000: remove 3.2 support 
SVN-Revision: 31894
 2012-05-27 15:01:18 +00:00
Gabor Juhos
fbe10e73c6 au1000: switch to 3.3 and add broken flag 
SVN-Revision: 31893
 2012-05-27 15:01:17 +00:00
Gabor Juhos
e065d5cfbe au1000: add support for 3.3 
Compile tested only.

SVN-Revision: 31892
 2012-05-27 15:01:15 +00:00
Gabor Juhos
de4c4d35e1 linux/3.1: R.I.P. 
SVN-Revision: 31891
 2012-05-27 15:01:09 +00:00
Gabor Juhos
cead4b47ab omap24xx: remove 3.1 support 
SVN-Revision: 31890
 2012-05-27 15:01:07 +00:00
Gabor Juhos
7a4db11fbb omap24xx: switch to 3.3 and add broken flag 
SVN-Revision: 31889
 2012-05-27 15:01:05 +00:00
Gabor Juhos
d004168445 cns3xxx: remove 3.1 support 
SVN-Revision: 31888
 2012-05-27 15:01:03 +00:00
Gabor Juhos
6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag 
SVN-Revision: 31887
 2012-05-27 15:01:02 +00:00
Felix Fietkau
6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers 
SVN-Revision: 31886
 2012-05-27 14:43:58 +00:00
Jonas Gorski
ec7786c2ec bcm63xx: build images for DSL-274XB revision F1 
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
 2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9 bcm63xx: add ath9k to atheros wifi profile 
SVN-Revision: 31884
 2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab bcm63xx: enable bcm6328 support and required drivers 
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
 2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335 bcm63xx: add support for DSL-274XB rev F1 
SVN-Revision: 31882
 2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f bcm63xx: fix port state after network down 
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
 2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices 
SVN-Revision: 31880
 2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
 2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328 
SVN-Revision: 31878
 2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection 
SVN-Revision: 31877
 2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
 2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44 bcm63xx: add a default switch configuration for DSL-274XB 
SVN-Revision: 31874
 2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa bcm63xx: setup network config through uci-defaults 
SVN-Revision: 31873
 2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
SVN-Revision: 31872
 2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0 bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
 2012-05-27 13:22:08 +00:00
Felix Fietkau
230c0eb2cb kernel: fix a warning in the connmark module 
SVN-Revision: 31856
 2012-05-24 18:25:08 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
c57409e79d ar71xx: fix an insignificant typo 
Patch from #11485.

SVN-Revision: 31847
 2012-05-23 21:05:30 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Gabor Juhos
758f670376 ar71xx: add support for TP-Link TL-MR3040 
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
 2012-05-23 21:05:24 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
 2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
 2012-05-23 21:05:22 +00:00
Gabor Juhos
1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver 
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
 2012-05-23 21:05:19 +00:00
Felix Fietkau
9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 
SVN-Revision: 31835
 2012-05-20 21:58:03 +00:00
Felix Fietkau
ce59af117c kernel: merge a net-next fq_codel backlog handling fix 
SVN-Revision: 31813
 2012-05-18 22:12:15 +00:00
Gabor Juhos
02c2f449d7 omap24xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31810
 2012-05-18 20:22:32 +00:00
Gabor Juhos
c2a2d59db5 cns3xxx: add support for 3.3 
Compile tested only.

SVN-Revision: 31809
 2012-05-18 20:10:53 +00:00
Gabor Juhos
1fd4bf270b linux/2.6.39: R.I.P. 
SVN-Revision: 31808
 2012-05-18 20:10:51 +00:00
Gabor Juhos
05c0d8b28e cns3xxx: sync kernel config 
SVN-Revision: 31807
 2012-05-18 20:10:48 +00:00
Gabor Juhos
9718f03e24 cns3xxx: remove 2.6.39 support 
SVN-Revision: 31806
 2012-05-18 20:10:46 +00:00
Gabor Juhos
9e78becbac cns3xxx: switch to 3.1 
Compile tested only.

SVN-Revision: 31805
 2012-05-18 20:10:44 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
 2012-05-18 20:10:33 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash 
detect nvram on Linksys E3200

SVN-Revision: 31790
 2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer 
SVN-Revision: 31789
 2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3 
SVN-Revision: 31788
 2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver 
SVN-Revision: 31787
 2012-05-18 15:44:25 +00:00
Gabor Juhos
e3678eb33e cobalt: remove 2.6.39 specific patches 
SVN-Revision: 31785
 2012-05-18 09:59:22 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3 
Compile tested only.

SVN-Revision: 31784
 2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC 
SVN-Revision: 31783
 2012-05-18 09:57:29 +00:00
Felix Fietkau
3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 
SVN-Revision: 31781
 2012-05-17 21:20:23 +00:00
Felix Fietkau
03babf3641 target: add a feature flag for RTC support 
SVN-Revision: 31777
 2012-05-17 15:28:09 +00:00
Hauke Mehrtens
c30405070c kernel: add some missing config options added by r31756 
SVN-Revision: 31774
 2012-05-17 13:28:30 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
SVN-Revision: 31772
 2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2 
SVN-Revision: 31771
 2012-05-17 13:20:10 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3 
Compile tested only.

SVN-Revision: 31765
 2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3 
Compile tested only.

SVN-Revision: 31764
 2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3 
Compile tested only.

SVN-Revision: 31763
 2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3 
Compile tested only.

SVN-Revision: 31762
 2012-05-17 06:40:56 +00:00
Felix Fietkau
54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
 2012-05-16 15:23:03 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3 
Compile tested only.

SVN-Revision: 31752
 2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs 
SVN-Revision: 31751
 2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs 
SVN-Revision: 31749
 2012-05-16 10:44:49 +00:00
Gabor Juhos
637fd23428 linux/3.3: add missing symbol 
SVN-Revision: 31748
 2012-05-16 10:44:46 +00:00
Gabor Juhos
67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

SVN-Revision: 31738
 2012-05-15 11:12:31 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
SVN-Revision: 31736
 2012-05-15 10:36:39 +00:00
John Crispin
364f47e454 code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
 2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
 2012-05-15 09:38:02 +00:00