do not use MULTI_IRQ_HANDLER it is bogus on our platform

This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

SVN-Revision: 32470
This commit is contained in:
Florian Fainelli 2012-06-20 21:57:45 +00:00
parent f45cd30543
commit 3b0dba382b
3 changed files with 25 additions and 23 deletions

View file

@ -4,3 +4,26 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =mcs814x_intc_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \tmp, #0x40
ldr \irqstat, [\base, \tmp]
tst \irqstat, \irqstat @ test if no active IRQ's
beq 1002f @ if no active irqs return with status 0
mov \irqnr, #0 @ start from irq zero
mov \tmp, #1 @ the mask initially 1
1001:
tst \irqstat, \tmp @ and with mask
addeq \irqnr, \irqnr, #1 @ if zero then add one to nr
moveq \tmp, \tmp, lsl #1 @ shift mask one to left
beq 1001b @ if zero then loop again
mov \irqstat, \tmp @ save the return mask
mov \tmp, #0x00 @ ICR offset
str \irqstat, [\base, \tmp] @ clear irq with selected mask
1002:
.endm

View file

@ -20,7 +20,7 @@
#define MCS814X_IRQ_MASK 0x20
#define MCS814X_IRQ_STS0 0x40
static void __iomem *mcs814x_intc_base;
void __iomem *mcs814x_intc_base;
static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
unsigned int num)
@ -47,26 +47,6 @@ static void __init mcs814x_alloc_gc(void __iomem *base, unsigned int irq_start,
__raw_writel(0xffffffff, base + MCS814X_IRQ_ICR);
}
asmlinkage void __exception_irq_entry mcs814x_handle_irq(struct pt_regs *regs)
{
u32 status, irq;
do {
/* read the status register */
status = __raw_readl(mcs814x_intc_base + MCS814X_IRQ_STS0);
if (!status)
break;
irq = ffs(status) - 1;
status |= (1 << irq);
/* clear the interrupt */
__raw_writel(status, mcs814x_intc_base + MCS814X_IRQ_ICR);
/* call the generic handler */
handle_IRQ(irq, regs);
} while (1);
}
static const struct of_device_id mcs814x_intc_ids[] = {
{ .compatible = "moschip,mcs814x-intc" },
{ /* sentinel */ },

View file

@ -1,6 +1,6 @@
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -869,6 +869,21 @@ config ARCH_EXYNOS
@@ -869,6 +869,20 @@ config ARCH_EXYNOS
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@ -15,7 +15,6 @@
+ select CLKDEV_LOOKUP
+ select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
+ select MULTI_IRQ_HANDLER
+ help
+ Support for Moschip MCS814x SoCs (MCS8140).
+