linux/3.2: R.I.P.

SVN-Revision: 31905
This commit is contained in:
Gabor Juhos 2012-05-27 15:01:37 +00:00
parent 20ba6d90e3
commit 0b8c1c8dfb
141 changed files with 0 additions and 70858 deletions

File diff suppressed because it is too large Load diff

View file

@ -1,96 +0,0 @@
From 2d303b4683145f7dbc918bd14d04e1396581b2ce Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@openwrt.org>
Date: Thu, 7 Jul 2011 12:05:21 +0200
Subject: [PATCH] ARM: support XZ compressed kernels
Wire up support for the XZ decompressor
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
arch/arm/Kconfig | 1 +
arch/arm/boot/compressed/Makefile | 11 +++++++++--
arch/arm/boot/compressed/decompress.c | 4 ++++
arch/arm/boot/compressed/piggy.xzkern.S | 6 ++++++
lib/xz/xz_dec_stream.c | 1 +
5 files changed, 21 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/compressed/piggy.xzkern.S
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -20,6 +20,7 @@ config ARM
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_XZ
select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -92,6 +92,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/
suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix_$(CONFIG_KERNEL_XZ) = xzkern
# Borrowed libfdt files for the ATAG compatibility mode
@@ -115,7 +116,7 @@ targets := vmlinux vmlinux.lds \
lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
+extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -170,8 +171,14 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CO
false; \
fi
+# For __aeabi_llsl
+ashldi3 = $(obj)/ashldi3.o
+
+$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S FORCE
+ $(call cmd,shipped)
+
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -44,6 +44,12 @@ extern void error(char *);
#include "../../../../lib/decompress_unlzma.c"
#endif
+#ifdef CONFIG_KERNEL_XZ
+#define memmove memmove
+#define memcpy memcpy
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
{
return decompress(input, len, NULL, NULL, output, NULL, error);
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.xzkern.S
@@ -0,0 +1,6 @@
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy.xzkern"
+ .globl input_data_end
+input_data_end:
--- a/lib/xz/xz_dec_stream.c
+++ b/lib/xz/xz_dec_stream.c
@@ -9,6 +9,7 @@
#include "xz_private.h"
#include "xz_stream.h"
+#include <linux/kernel.h>
/* Hash used to validate the Index field */
struct xz_dec_hash {

View file

@ -1,850 +0,0 @@
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -13,6 +13,9 @@
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/delay.h>
#include <linux/export.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
+#endif
#include "ssb_private.h"
@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s
u32 pmuctl, tmp, pllctl;
unsigned int i;
- if ((bus->chip_id == 0x5354) && !crystalfreq) {
- /* The 5354 crystal freq is 25MHz */
- crystalfreq = 25000;
- }
if (crystalfreq)
e = pmu0_plltab_find_entry(crystalfreq);
if (!e)
@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_
u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
if (bus->bustype == SSB_BUSTYPE_SSB) {
- /* TODO: The user may override the crystal frequency. */
+#ifdef CONFIG_BCM47XX
+ char buf[20];
+ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+ crystalfreq = simple_strtoul(buf, NULL, 0);
+#endif
}
switch (bus->chip_id) {
@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_
ssb_pmu1_pllinit_r0(cc, crystalfreq);
break;
case 0x4328:
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
case 0x5354:
+ if (crystalfreq == 0)
+ crystalfreq = 25000;
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
case 0x4322:
@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+
+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x5354:
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PMU cpu clock unknown for device %04X\n",
+ bus->chip_id);
+ return 0;
+ }
+}
+
+u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x5354:
+ return 120000000;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "ERROR: PMU controlclock unknown for device %04X\n",
+ bus->chip_id);
+ return 0;
+ }
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
struct ssb_bus *bus = mcore->dev->bus;
u32 pll_type, n, m, rate = 0;
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_cpu_clock(&bus->chipco);
+
if (bus->extif.dev) {
ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
} else if (bus->chipco.dev) {
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_
u32 tmp;
/* We do only have one cardbus device behind the bridge. */
- if (pc->cardbusmode && (dev >= 1))
+ if (pc->cardbusmode && (dev > 1))
goto out;
if (bus == 0) {
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de
put_device(dev->dev);
}
-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
-{
- if (drv)
- get_driver(&drv->drv);
- return drv;
-}
-
-static inline void ssb_driver_put(struct ssb_driver *drv)
-{
- if (drv)
- put_driver(&drv->drv);
-}
-
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b
ssb_device_put(sdev);
continue;
}
- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
- ssb_device_put(sdev);
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv->remove))
continue;
- }
sdrv->remove(sdev);
ctx->device_frozen[i] = 1;
}
@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c
dev_name(sdev->dev));
result = err;
}
- ssb_driver_put(sdrv);
ssb_device_put(sdev);
}
@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
u32 plltype;
u32 clkctl_n, clkctl_m;
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_controlclock(&bus->chipco);
+
if (ssb_extif_available(&bus->extif))
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
&clkctl_n, &clkctl_m);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -178,6 +178,18 @@ err_pci:
#define SPEX(_outvar, _offset, _mask, _shift) \
SPEX16(_outvar, _offset, _mask, _shift)
+#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
+ do { \
+ SPEX(_field[0], _offset + 0, _mask, _shift); \
+ SPEX(_field[1], _offset + 2, _mask, _shift); \
+ SPEX(_field[2], _offset + 4, _mask, _shift); \
+ SPEX(_field[3], _offset + 6, _mask, _shift); \
+ SPEX(_field[4], _offset + 8, _mask, _shift); \
+ SPEX(_field[5], _offset + 10, _mask, _shift); \
+ SPEX(_field[6], _offset + 12, _mask, _shift); \
+ SPEX(_field[7], _offset + 14, _mask, _shift); \
+ } while (0)
+
static inline u8 ssb_crc8(u8 crc, u8 data)
{
@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
{
int i;
u16 v;
- s8 gain;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
SSB_SPROM1_BINF_ANTA_SHIFT);
SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
if (out->revision >= 2)
SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
/* Extract the antenna gain values. */
- gain = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_BG,
- SSB_SPROM1_AGAIN_BG_SHIFT);
- out->antenna_gain.ghz24.a0 = gain;
- out->antenna_gain.ghz24.a1 = gain;
- out->antenna_gain.ghz24.a2 = gain;
- out->antenna_gain.ghz24.a3 = gain;
- gain = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
- out->antenna_gain.ghz5.a0 = gain;
- out->antenna_gain.ghz5.a1 = gain;
- out->antenna_gain.ghz5.a2 = gain;
- out->antenna_gain.ghz5.a3 = gain;
+ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_BG,
+ SSB_SPROM1_AGAIN_BG_SHIFT);
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
}
/* Revs 4 5 and 8 have partially shared layout */
@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
if (out->revision == 4) {
- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
} else {
- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
+ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
+ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
+ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
+ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
sprom_extract_r458(out, in);
@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
- u16 v;
+ u16 v, o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ };
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
for (i = 0; i < 3; i++) {
v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
}
- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
+ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
+ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
+ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_MAXP, 0);
+
+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
+
+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GH_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
+
+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
+
+ /* Extract FEM info */
+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
+ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT);
+ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT);
+ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
+ SSB_SPROM8_LEDDC_ON_SHIFT);
+ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
+ SSB_SPROM8_LEDDC_OFF_SHIFT);
+
+ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
+ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
+ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
+ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
+ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
+ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
+
+ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
+
+ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
+
+ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
+ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
+ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
+ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
+ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
+ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
+ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
+ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
+ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
+ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
+ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
+ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
+
+ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
+ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
+ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
+ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
+
+ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
+ SSB_SPROM8_THERMAL_TRESH_SHIFT);
+ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
+ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
+ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
+ SSB_SPROM8_TEMPDELTA_PHYCAL,
+ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
+ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
+ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
+ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
+ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
+ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
@@ -736,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct
{
bi->vendor = bus->host_pci->subsystem_vendor;
bi->type = bus->host_pci->subsystem_device;
- bi->rev = bus->host_pci->revision;
}
int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
case SSB_PCMCIA_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->TupleDataLen != 2,
"antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+ sprom->antenna_gain.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.a3 = tuple->TupleData[1];
break;
case SSB_PCMCIA_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
+ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
+ "package 0x%02X\n", bus->chip_id, bus->chip_rev,
+ bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
case SSB_SDIO_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->size != 2,
"antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+ sprom->antenna_gain.a0 = tuple->data[1];
+ sprom->antenna_gain.a1 = tuple->data[1];
+ sprom->antenna_gain.a2 = tuple->data[1];
+ sprom->antenna_gain.a3 = tuple->data[1];
break;
case SSB_SDIO_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->size != 3) &&
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex
}
#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+/* driver_chipcommon_pmu.c */
+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
+
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -16,6 +16,12 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
+struct ssb_sprom_core_pwr_info {
+ u8 itssi_2g, itssi_5g;
+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
+ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
+};
+
struct ssb_sprom {
u8 revision;
u8 il0mac[6]; /* MAC address for 802.11b/g */
@@ -26,9 +32,12 @@ struct ssb_sprom {
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
u16 board_rev; /* Board revision number from SPROM. */
+ u16 board_num; /* Board number from SPROM. */
+ u16 board_type; /* Board type from SPROM. */
u8 country_code; /* Country Code */
- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
+ char alpha2[2]; /* Country Code as two chars like EU or US */
+ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
+ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
@@ -47,10 +56,10 @@ struct ssb_sprom {
u8 gpio1; /* GPIO pin 1 */
u8 gpio2; /* GPIO pin 2 */
u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
u8 tri2g; /* 2.4GHz TX isolation */
@@ -61,8 +70,8 @@ struct ssb_sprom {
u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
- u8 rxpo2g; /* 2GHz RX power offset */
- u8 rxpo5g; /* 5GHz RX power offset */
+ s8 rxpo2g; /* 2GHz RX power offset */
+ s8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
u8 rssismc2g;
u8 rssismf2g;
@@ -82,26 +91,103 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
+ struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
struct {
- struct {
- s8 a0, a1, a2, a3;
- } ghz24; /* 2.4GHz band */
- struct {
- s8 a0, a1, a2, a3;
- } ghz5; /* 5GHz band */
+ s8 a0, a1, a2, a3;
} antenna_gain;
- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ struct {
+ struct {
+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+ } ghz2;
+ struct {
+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+ } ghz5;
+ } fem;
+
+ u16 mcs2gpo[8];
+ u16 mcs5gpo[8];
+ u16 mcs5glpo[8];
+ u16 mcs5ghpo[8];
+ u8 opo;
+
+ u8 rxgainerr2ga[3];
+ u8 rxgainerr5gla[3];
+ u8 rxgainerr5gma[3];
+ u8 rxgainerr5gha[3];
+ u8 rxgainerr5gua[3];
+
+ u8 noiselvl2ga[3];
+ u8 noiselvl5gla[3];
+ u8 noiselvl5gma[3];
+ u8 noiselvl5gha[3];
+ u8 noiselvl5gua[3];
+
+ u8 regrev;
+ u8 txchain;
+ u8 rxchain;
+ u8 antswitch;
+ u16 cddpo;
+ u16 stbcpo;
+ u16 bw40po;
+ u16 bwduppo;
+
+ u8 tempthresh;
+ u8 tempoffset;
+ u16 rawtempsense;
+ u8 measpower;
+ u8 tempsense_slope;
+ u8 tempcorrx;
+ u8 tempsense_option;
+ u8 freqoffset_corr;
+ u8 iqcal_swp_dis;
+ u8 hw_iqcal_en;
+ u8 elna2g;
+ u8 elna5g;
+ u8 phycal_tempdelta;
+ u8 temps_period;
+ u8 temps_hysteresis;
+ u8 measpower1;
+ u8 measpower2;
+ u8 pcieingress_war;
+
+ /* power per rate from sromrev 9 */
+ u16 cckbw202gpo;
+ u16 cckbw20ul2gpo;
+ u32 legofdmbw202gpo;
+ u32 legofdmbw20ul2gpo;
+ u32 legofdmbw205glpo;
+ u32 legofdmbw20ul5glpo;
+ u32 legofdmbw205gmpo;
+ u32 legofdmbw20ul5gmpo;
+ u32 legofdmbw205ghpo;
+ u32 legofdmbw20ul5ghpo;
+ u32 mcsbw202gpo;
+ u32 mcsbw20ul2gpo;
+ u32 mcsbw402gpo;
+ u32 mcsbw205glpo;
+ u32 mcsbw20ul5glpo;
+ u32 mcsbw405glpo;
+ u32 mcsbw205gmpo;
+ u32 mcsbw20ul5gmpo;
+ u32 mcsbw405gmpo;
+ u32 mcsbw205ghpo;
+ u32 mcsbw20ul5ghpo;
+ u32 mcsbw405ghpo;
+ u16 mcs32po;
+ u16 legofdm40duppo;
+ u8 sar2g;
+ u8 sar5g;
};
/* Information about the PCB the circuitry is soldered on. */
struct ssb_boardinfo {
u16 vendor;
u16 type;
- u8 rev;
};
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -2,6 +2,7 @@
#define LINUX_SSB_DRIVER_GIGE_H_
#include <linux/ssb/ssb.h>
+#include <linux/bug.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -228,6 +228,7 @@
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
+#define SSB_SPROM1_CCODE 0x0076
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
@@ -267,6 +268,7 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
+#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */
#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
@@ -389,6 +391,11 @@
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
+#define SSB_SPROM8_LEDDC 0x009A
+#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */
+#define SSB_SPROM8_LEDDC_ON_SHIFT 8
+#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */
+#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
@@ -404,6 +411,13 @@
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
+#define SSB_SPROM8_TXRXC 0x00A2
+#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
+#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
+#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
+#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
+#define SSB_SPROM8_TXRXC_SWITCH 0xff00
+#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
@@ -430,8 +444,87 @@
#define SSB_SPROM8_TRI5GH_SHIFT 8
#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+#define SSB_SPROM8_RXPO2G_SHIFT 0
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
+#define SSB_SPROM8_FEM2G 0x00AE
+#define SSB_SPROM8_FEM5G 0x00B0
+#define SSB_SROM8_FEM_TSSIPOS 0x0001
+#define SSB_SROM8_FEM_TSSIPOS_SHIFT 0
+#define SSB_SROM8_FEM_EXTPA_GAIN 0x0006
+#define SSB_SROM8_FEM_EXTPA_GAIN_SHIFT 1
+#define SSB_SROM8_FEM_PDET_RANGE 0x00F8
+#define SSB_SROM8_FEM_PDET_RANGE_SHIFT 3
+#define SSB_SROM8_FEM_TR_ISO 0x0700
+#define SSB_SROM8_FEM_TR_ISO_SHIFT 8
+#define SSB_SROM8_FEM_ANTSWLUT 0xF800
+#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
+#define SSB_SPROM8_THERMAL 0x00B2
+#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
+#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
+#define SSB_SPROM8_THERMAL_TRESH 0xff00
+#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
+/* Temp sense related entries */
+#define SSB_SPROM8_RAWTS 0x00B4
+#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
+#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
+#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
+#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
+#define SSB_SPROM8_OPT_CORRX 0x00B6
+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
+/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
+#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
+#define SSB_SPROM8_TEMPDELTA 0x00BA
+#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
+#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
+#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
+#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
+#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
+#define SSB_SROM8_PWR_INFO_CORE2 0x0100
+#define SSB_SROM8_PWR_INFO_CORE3 0x0120
+
+#define SSB_SROM8_2G_MAXP_ITSSI 0x00
+#define SSB_SPROM8_2G_MAXP 0x00FF
+#define SSB_SPROM8_2G_ITSSI 0xFF00
+#define SSB_SPROM8_2G_ITSSI_SHIFT 8
+#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
+#define SSB_SROM8_2G_PA_1 0x04
+#define SSB_SROM8_2G_PA_2 0x06
+#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
+#define SSB_SPROM8_5G_MAXP 0x00FF
+#define SSB_SPROM8_5G_ITSSI 0xFF00
+#define SSB_SPROM8_5G_ITSSI_SHIFT 8
+#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
+#define SSB_SPROM8_5GH_MAXP 0x00FF
+#define SSB_SPROM8_5GL_MAXP 0xFF00
+#define SSB_SPROM8_5GL_MAXP_SHIFT 8
+#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
+#define SSB_SROM8_5G_PA_1 0x0E
+#define SSB_SROM8_5G_PA_2 0x10
+#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
+#define SSB_SROM8_5GL_PA_1 0x14
+#define SSB_SROM8_5GL_PA_2 0x16
+#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
+#define SSB_SROM8_5GH_PA_1 0x1A
+#define SSB_SROM8_5GH_PA_2 0x1C
+
+/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
@@ -456,12 +549,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
+
#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+#define SSB_SPROM8_2G_MCSPO 0x0152
+#define SSB_SPROM8_5G_MCSPO 0x0162
+#define SSB_SPROM8_5GL_MCSPO 0x0172
+#define SSB_SPROM8_5GH_MCSPO 0x0182
+
+#define SSB_SPROM8_CDDPO 0x0192
+#define SSB_SPROM8_STBCPO 0x0194
+#define SSB_SPROM8_BW40PO 0x0196
+#define SSB_SPROM8_BWDUPPO 0x0198
+
/* Values for boardflags_lo read from SPROM */
#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -1,41 +0,0 @@
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -753,7 +753,7 @@ static int ehci_run (struct usb_hcd *hcd
"USB %x.%x started, EHCI %x.%02x%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff,
- ignore_oc ? ", overcurrent ignored" : "");
+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
ehci_writel(ehci, INTR_MASK,
&ehci->regs->intr_enable); /* Turn On Interrupts */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -578,7 +578,7 @@ ehci_hub_status_data (struct usb_hcd *hc
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
- if (!ignore_oc)
+ if (!ignore_oc && !ehci->ignore_oc)
mask = PORT_CSC | PORT_PEC | PORT_OCC;
else
mask = PORT_CSC | PORT_PEC;
@@ -803,7 +803,7 @@ static int ehci_hub_control (
if (temp & PORT_PEC)
status |= USB_PORT_STAT_C_ENABLE << 16;
- if ((temp & PORT_OCC) && !ignore_oc){
+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
status |= USB_PORT_STAT_C_OVERCURRENT << 16;
/*
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -147,6 +147,7 @@ struct ehci_hcd { /* one per controlle
unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
+ unsigned ignore_oc:1;
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)

View file

@ -1,10 +0,0 @@
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -17,6 +17,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
struct map_info;
struct platform_device;

View file

@ -1,75 +0,0 @@
commit 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f
Author: David Woodhouse <dwmw2@infradead.org>
Date: Sun Apr 8 10:01:44 2012 +0000
ppp: Fix race condition with queue start/stop
Commit e675f0cc9a872fd152edc0c77acfed19bf28b81e ("ppp: Don't stop and
restart queue on every TX packet") introduced a race condition which
could leave the net queue stopped even when the channel is no longer
busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the
return value from ppp_xmit_process() but *after* all the locks have been
dropped, we could potentially do so *after* the channel has actually
finished transmitting and attempted to re-wake the queue.
Fix this by moving the netif_stop_queue() into ppp_xmit_process() under
the xmit lock. I hadn't done this previously, because it gets called
from other places than ppp_start_xmit(). But I now think it's the better
option. The net queue *should* be stopped if the channel becomes
congested due to writes from pppd, anyway.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e675f0cc9a872fd152edc0c77acfed19bf28b81e
Author: David Woodhouse <dwmw2@infradead.org>
Date: Mon Mar 26 00:03:42 2012 +0000
ppp: Don't stop and restart queue on every TX packet
For every transmitted packet, ppp_start_xmit() will stop the netdev
queue and then, if appropriate, restart it. This causes the TX softirq
to run, entirely gratuitously.
This is "only" a waste of CPU time in the normal case, but it's actively
harmful when the PPP device is a TEQL slave — the wakeup will cause the
offending device to receive the next TX packet from the TEQL queue, when
it *should* have gone to the next slave in the list. We end up seeing
large bursts of packets on just *one* slave device, rather than using
the full available bandwidth over all slaves.
This patch fixes the problem by *not* unconditionally stopping the queue
in ppp_start_xmit(). It adds a return value from ppp_xmit_process()
which indicates whether the queue should be stopped or not.
It *doesn't* remove the call to netif_wake_queue() from
ppp_xmit_process(), because other code paths (especially from
ppp_output_wakeup()) need it there and it's messy to push it out to the
other callers to do it based on the return value. So we leave it in
place — it's a no-op in the case where the queue wasn't stopped, so it's
harmless in the TX path.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -968,7 +968,6 @@ ppp_start_xmit(struct sk_buff *skb, stru
proto = npindex_to_proto[npi];
put_unaligned_be16(proto, pp);
- netif_stop_queue(dev);
skb_queue_tail(&ppp->file.xq, skb);
ppp_xmit_process(ppp);
return NETDEV_TX_OK;
@@ -1063,6 +1062,8 @@ ppp_xmit_process(struct ppp *ppp)
code that we can accept some more. */
if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq))
netif_wake_queue(ppp->dev);
+ else
+ netif_stop_queue(ppp->dev);
}
ppp_xmit_unlock(ppp);
}

View file

@ -1,188 +0,0 @@
From 9d02daf754238adac48fa075ee79e7edd3d79ed3 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 8 Apr 2012 09:55:43 +0000
Subject: [PATCH] pppoatm: Fix excessive queue bloat
We discovered that PPPoATM has an excessively deep transmit queue. A
queue the size of the default socket send buffer (wmem_default) is
maintained between the PPP generic core and the ATM device.
Fix it to queue a maximum of *two* packets. The one the ATM device is
currently working on, and one more for the ATM driver to process
immediately in its TX done interrupt handler. The PPP core is designed
to feed packets to the channel with minimal latency, so that really
ought to be enough to keep the ATM device busy.
While we're at it, fix the fact that we were triggering the wakeup
tasklet on *every* pppoatm_pop() call. The comment saying "this is
inefficient, but doing it right is too hard" turns out to be overly
pessimistic... I think :)
On machines like the Traverse Geos, with a slow Geode CPU and two
high-speed ADSL2+ interfaces, there were reports of extremely high CPU
usage which could partly be attributed to the extra wakeups.
(The wakeup handling could actually be made a whole lot easier if we
stop checking sk->sk_sndbuf altogether. Given that we now only queue
*two* packets ever, one wonders what the point is. As it is, you could
already deadlock the thing by setting the sk_sndbuf to a value lower
than the MTU of the device, and it'd just block for ever.)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
net/atm/pppoatm.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 85 insertions(+), 10 deletions(-)
--- a/net/atm/pppoatm.c
+++ b/net/atm/pppoatm.c
@@ -62,12 +62,25 @@ struct pppoatm_vcc {
void (*old_pop)(struct atm_vcc *, struct sk_buff *);
/* keep old push/pop for detaching */
enum pppoatm_encaps encaps;
+ atomic_t inflight;
+ unsigned long blocked;
int flags; /* SC_COMP_PROT - compress protocol */
struct ppp_channel chan; /* interface to generic ppp layer */
struct tasklet_struct wakeup_tasklet;
};
/*
+ * We want to allow two packets in the queue. The one that's currently in
+ * flight, and *one* queued up ready for the ATM device to send immediately
+ * from its TX done IRQ. We want to be able to use atomic_inc_not_zero(), so
+ * inflight == -2 represents an empty queue, -1 one packet, and zero means
+ * there are two packets in the queue.
+ */
+#define NONE_INFLIGHT -2
+
+#define BLOCKED 0
+
+/*
* Header used for LLC Encapsulated PPP (4 bytes) followed by the LCP protocol
* ID (0xC021) used in autodetection
*/
@@ -102,16 +115,30 @@ static void pppoatm_wakeup_sender(unsign
static void pppoatm_pop(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
struct pppoatm_vcc *pvcc = atmvcc_to_pvcc(atmvcc);
+
pvcc->old_pop(atmvcc, skb);
+ atomic_dec(&pvcc->inflight);
+
/*
- * We don't really always want to do this since it's
- * really inefficient - it would be much better if we could
- * test if we had actually throttled the generic layer.
- * Unfortunately then there would be a nasty SMP race where
- * we could clear that flag just as we refuse another packet.
- * For now we do the safe thing.
+ * We always used to run the wakeup tasklet unconditionally here, for
+ * fear of race conditions where we clear the BLOCKED flag just as we
+ * refuse another packet in pppoatm_send(). This was quite inefficient.
+ *
+ * In fact it's OK. The PPP core will only ever call pppoatm_send()
+ * while holding the channel->downl lock. And ppp_output_wakeup() as
+ * called by the tasklet will *also* grab that lock. So even if another
+ * CPU is in pppoatm_send() right now, the tasklet isn't going to race
+ * with it. The wakeup *will* happen after the other CPU is safely out
+ * of pppoatm_send() again.
+ *
+ * So if the CPU in pppoatm_send() has already set the BLOCKED bit and
+ * it about to return, that's fine. We trigger a wakeup which will
+ * happen later. And if the CPU in pppoatm_send() *hasn't* set the
+ * BLOCKED bit yet, that's fine too because of the double check in
+ * pppoatm_may_send() which is commented there.
*/
- tasklet_schedule(&pvcc->wakeup_tasklet);
+ if (test_and_clear_bit(BLOCKED, &pvcc->blocked))
+ tasklet_schedule(&pvcc->wakeup_tasklet);
}
/*
@@ -184,6 +211,51 @@ error:
ppp_input_error(&pvcc->chan, 0);
}
+static inline int pppoatm_may_send(struct pppoatm_vcc *pvcc, int size)
+{
+ /*
+ * It's not clear that we need to bother with using atm_may_send()
+ * to check we don't exceed sk->sk_sndbuf. If userspace sets a
+ * value of sk_sndbuf which is lower than the MTU, we're going to
+ * block for ever. But the code always did that before we introduced
+ * the packet count limit, so...
+ */
+ if (atm_may_send(pvcc->atmvcc, size) &&
+ atomic_inc_not_zero_hint(&pvcc->inflight, NONE_INFLIGHT))
+ return 1;
+
+ /*
+ * We use test_and_set_bit() rather than set_bit() here because
+ * we need to ensure there's a memory barrier after it. The bit
+ * *must* be set before we do the atomic_inc() on pvcc->inflight.
+ * There's no smp_mb__after_set_bit(), so it's this or abuse
+ * smp_mb__after_clear_bit().
+ */
+ test_and_set_bit(BLOCKED, &pvcc->blocked);
+
+ /*
+ * We may have raced with pppoatm_pop(). If it ran for the
+ * last packet in the queue, *just* before we set the BLOCKED
+ * bit, then it might never run again and the channel could
+ * remain permanently blocked. Cope with that race by checking
+ * *again*. If it did run in that window, we'll have space on
+ * the queue now and can return success. It's harmless to leave
+ * the BLOCKED flag set, since it's only used as a trigger to
+ * run the wakeup tasklet. Another wakeup will never hurt.
+ * If pppoatm_pop() is running but hasn't got as far as making
+ * space on the queue yet, then it hasn't checked the BLOCKED
+ * flag yet either, so we're safe in that case too. It'll issue
+ * an "immediate" wakeup... where "immediate" actually involves
+ * taking the PPP channel's ->downl lock, which is held by the
+ * code path that calls pppoatm_send(), and is thus going to
+ * wait for us to finish.
+ */
+ if (atm_may_send(pvcc->atmvcc, size) &&
+ atomic_inc_not_zero(&pvcc->inflight))
+ return 1;
+
+ return 0;
+}
/*
* Called by the ppp_generic.c to send a packet - returns true if packet
* was accepted. If we return false, then it's our job to call
@@ -207,7 +279,7 @@ static int pppoatm_send(struct ppp_chann
struct sk_buff *n;
n = skb_realloc_headroom(skb, LLC_LEN);
if (n != NULL &&
- !atm_may_send(pvcc->atmvcc, n->truesize)) {
+ !pppoatm_may_send(pvcc, n->truesize)) {
kfree_skb(n);
goto nospace;
}
@@ -215,12 +287,12 @@ static int pppoatm_send(struct ppp_chann
skb = n;
if (skb == NULL)
return DROP_PACKET;
- } else if (!atm_may_send(pvcc->atmvcc, skb->truesize))
+ } else if (!pppoatm_may_send(pvcc, skb->truesize))
goto nospace;
memcpy(skb_push(skb, LLC_LEN), pppllc, LLC_LEN);
break;
case e_vc:
- if (!atm_may_send(pvcc->atmvcc, skb->truesize))
+ if (!pppoatm_may_send(pvcc, skb->truesize))
goto nospace;
break;
case e_autodetect:
@@ -285,6 +357,9 @@ static int pppoatm_assign_vcc(struct atm
if (pvcc == NULL)
return -ENOMEM;
pvcc->atmvcc = atmvcc;
+
+ /* Maximum is zero, so that we can use atomic_inc_not_zero() */
+ atomic_set(&pvcc->inflight, NONE_INFLIGHT);
pvcc->old_push = atmvcc->push;
pvcc->old_pop = atmvcc->pop;
pvcc->encaps = (enum pppoatm_encaps) be.encaps;

View file

@ -1,11 +0,0 @@
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -168,7 +168,7 @@ else
# annotated or signed tagged state (as git describe only
# looks at signed or annotated tags - git tag -a/-s) and
# LOCALVERSION= is not specified
- if test "${LOCALVERSION+set}" != "set"; then
+ if test "${CONFIG_LOCALVERSION+set}" != "set"; then
scm=$(scm_version --short)
res="$res${scm:++}"
fi

View file

@ -1,24 +0,0 @@
--- a/Makefile
+++ b/Makefile
@@ -559,9 +559,9 @@ endif # $(dot-config)
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS += -Os
+KBUILD_CFLAGS += -Os -fno-caller-saves
else
-KBUILD_CFLAGS += -O2
+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch -fno-caller-saves
endif
include $(srctree)/arch/$(SRCARCH)/Makefile
@@ -620,6 +620,9 @@ endif
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
+# improve gcc optimization
+CFLAGS += $(call cc-option,-funit-at-a-time,)
+
# warn about C99 declaration after statement
KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)

View file

@ -1,11 +0,0 @@
--- a/Makefile
+++ b/Makefile
@@ -374,7 +374,7 @@ KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
-KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)

View file

@ -1,78 +0,0 @@
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -22,6 +22,35 @@
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
+#ifdef __APPLE__
+/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
+void *memmem (const void *haystack, size_t haystack_len,
+ const void *needle, size_t needle_len)
+{
+ const char *begin;
+ const char *const last_possible
+ = (const char *) haystack + haystack_len - needle_len;
+
+ if (needle_len == 0)
+ /* The first occurrence of the empty string is deemed to occur at
+ the beginning of the string. */
+ return (void *) haystack;
+
+ /* Sanity check, otherwise the loop might search through the whole
+ memory. */
+ if (__builtin_expect (haystack_len < needle_len, 0))
+ return NULL;
+
+ for (begin = (const char *) haystack; begin <= last_possible; ++begin)
+ if (begin[0] == ((const char *) needle)[0] &&
+ !memcmp ((const void *) &begin[1],
+ (const void *) ((const char *) needle + 1),
+ needle_len - 1))
+ return (void *) begin;
+
+ return NULL;
+}
+#endif
#ifndef ARRAY_SIZE
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -123,6 +123,9 @@ check-lxdialog := $(srctree)/$(src)/lxd
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
-DLOCALE
+ifeq ($(shell uname -s),Darwin)
+HOST_LOADLIBES += -lncurses
+endif
# ===========================================================================
# Shared Makefile for the various kconfig executables:
--- a/scripts/mod/mk_elfconfig.c
+++ b/scripts/mod/mk_elfconfig.c
@@ -1,7 +1,11 @@
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
+#ifndef __APPLE__
#include <elf.h>
+#else
+#include "../../../../../tools/sstrip/include/elf.h"
+#endif
int
main(int argc, char **argv)
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -7,7 +7,11 @@
#include <sys/mman.h>
#include <fcntl.h>
#include <unistd.h>
+#if !(defined(__APPLE__) || defined(__CYGWIN__))
#include <elf.h>
+#else
+#include "../../../../../tools/sstrip/include/elf.h"
+#endif
#include "elfconfig.h"

View file

@ -1,17 +0,0 @@
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -16,6 +16,7 @@ enum {
false = 0,
true = 1
};
+#endif /* __KERNEL__ */
#undef offsetof
#ifdef __compiler_offsetof
@@ -23,6 +24,5 @@ enum {
#else
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
#endif
-#endif /* __KERNEL__ */
#endif

View file

@ -1,89 +0,0 @@
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -52,6 +52,27 @@
#define LOAD_OFFSET 0
#endif
+#ifndef SYMTAB_KEEP_STR
+#define SYMTAB_KEEP_STR *(__ksymtab_strings+*)
+#define SYMTAB_DISCARD_STR
+#else
+#define SYMTAB_DISCARD_STR *(__ksymtab_strings+*)
+#endif
+
+#ifndef SYMTAB_KEEP
+#define SYMTAB_KEEP *(SORT(___ksymtab+*))
+#define SYMTAB_DISCARD
+#else
+#define SYMTAB_DISCARD *(SORT(___ksymtab+*))
+#endif
+
+#ifndef SYMTAB_KEEP_GPL
+#define SYMTAB_KEEP_GPL *(SORT(___ksymtab_gpl+*))
+#define SYMTAB_DISCARD_GPL
+#else
+#define SYMTAB_DISCARD_GPL *(SORT(___ksymtab_gpl+*))
+#endif
+
#ifndef SYMBOL_PREFIX
#define VMLINUX_SYMBOL(sym) sym
#else
@@ -275,14 +296,14 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
- *(SORT(___ksymtab+*)) \
+ SYMTAB_KEEP \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
- *(SORT(___ksymtab_gpl+*)) \
+ SYMTAB_KEEP_GPL \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
@@ -344,7 +365,7 @@
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
- *(__ksymtab_strings) \
+ SYMTAB_KEEP_STR \
} \
\
/* __*init sections */ \
@@ -676,6 +697,9 @@
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \
+ SYMTAB_DISCARD \
+ SYMTAB_DISCARD_GPL \
+ SYMTAB_DISCARD_STR \
*(.discard) \
*(.discard.*) \
}
--- a/include/linux/export.h
+++ b/include/linux/export.h
@@ -45,12 +45,19 @@ extern struct module __this_module;
#define __CRC_SYMBOL(sym, sec)
#endif
+#ifdef MODULE
+#define __EXPORT_SUFFIX(sym)
+#else
+#define __EXPORT_SUFFIX(sym) "+" #sym
+#endif
+
/* For every exported symbol, place a struct in the __ksymtab section */
#define __EXPORT_SYMBOL(sym, sec) \
extern typeof(sym) sym; \
__CRC_SYMBOL(sym, sec) \
static const char __kstrtab_##sym[] \
- __attribute__((section("__ksymtab_strings"), aligned(1))) \
+ __attribute__((section("__ksymtab_strings" \
+ __EXPORT_SUFFIX(sym)), aligned(1))) \
= MODULE_SYMBOL_PREFIX #sym; \
static const struct kernel_symbol __ksymtab_##sym \
__used \

View file

@ -1,54 +0,0 @@
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -296,7 +296,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
quiet_cmd_lzma = LZMA $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
quiet_cmd_lzo = LZO $@
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -226,7 +226,7 @@ cpio_list=
output="/dev/stdout"
output_file=""
is_cpio_compressed=
-compr="gzip -n -9 -f"
+compr="gzip -n -9 -f -"
arg="$1"
case "$arg" in
@@ -240,9 +240,9 @@ case "$arg" in
output_file="$1"
cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
output=${cpio_list}
- echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f"
- echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
- echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
+ echo "$output_file" | grep -q "\.gz$" && compr="gzip -n -9 -f -"
+ echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
+ echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
echo "$output_file" | grep -q "\.xz$" && \
compr="xz --check=crc32 --lzma2=dict=1MiB"
echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f"
@@ -303,7 +303,7 @@ if [ ! -z ${output_file} ]; then
if [ "${is_cpio_compressed}" = "compressed" ]; then
cat ${cpio_tfile} > ${output_file}
else
- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \
+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \
|| (rm -f ${output_file} ; false)
fi
[ -z ${cpio_file} ] && rm ${cpio_tfile}
--- a/lib/decompress.c
+++ b/lib/decompress.c
@@ -40,6 +40,7 @@ static const struct compress_format {
{ {037, 0236}, "gzip", gunzip },
{ {0x42, 0x5a}, "bzip2", bunzip2 },
{ {0x5d, 0x00}, "lzma", unlzma },
+ { {0x6d, 0x00}, "lzma-openwrt", unlzma },
{ {0xfd, 0x37}, "xz", unxz },
{ {0x89, 0x4c}, "lzo", unlzo },
{ {0, 0}, NULL, NULL }

View file

@ -1,18 +0,0 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -163,7 +163,6 @@ config NF_CONNTRACK_FTP
config NF_CONNTRACK_H323
tristate "H.323 protocol support"
- depends on (IPV6 || IPV6=n)
depends on NETFILTER_ADVANCED
help
H.323 is a VoIP signalling protocol from ITU-T. As one of the most
@@ -609,7 +608,6 @@ config NETFILTER_XT_TARGET_SECMARK
config NETFILTER_XT_TARGET_TCPMSS
tristate '"TCPMSS" target support'
- depends on (IPV6 || IPV6=n)
default m if NETFILTER_ADVANCED=n
---help---
This option adds a `TCPMSS' target, which allows you to alter the

View file

@ -1,11 +0,0 @@
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -8,7 +8,7 @@ config SND_PCM
select GCD
config SND_HWDEP
- tristate
+ tristate "Sound hardware support"
config SND_RAWMIDI
tristate

View file

@ -1,10 +0,0 @@
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -172,6 +172,7 @@ config CRYPTO_DEV_MV_CESA
depends on PLAT_ORION
select CRYPTO_ALGAPI
select CRYPTO_AES
+ select CRYPTO_HASH2
select CRYPTO_BLKCIPHER2
help
This driver allows you to utilize the Cryptographic Engines and

View file

@ -1,29 +0,0 @@
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -29,6 +29,7 @@ config SSB_SPROM
config SSB_BLOCKIO
bool
depends on SSB
+ default y
config SSB_PCIHOST_POSSIBLE
bool
@@ -49,7 +50,7 @@ config SSB_PCIHOST
config SSB_B43_PCI_BRIDGE
bool
depends on SSB_PCIHOST
- default n
+ default y
config SSB_PCMCIAHOST_POSSIBLE
bool
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -17,6 +17,7 @@ config BCMA
config BCMA_BLOCKIO
bool
depends on BCMA
+ default y
config BCMA_HOST_PCI_POSSIBLE
bool

View file

@ -1,23 +0,0 @@
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -197,16 +197,16 @@ config BCH_CONST_T
# Textsearch support is select'ed if needed
#
config TEXTSEARCH
- boolean
+ boolean "Textsearch support"
config TEXTSEARCH_KMP
- tristate
+ tristate "Textsearch KMP"
config TEXTSEARCH_BM
- tristate
+ tristate "Textsearch BM"
config TEXTSEARCH_FSM
- tristate
+ tristate "Textsearch FSM"
config BTREE
boolean

View file

@ -1,19 +0,0 @@
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -142,13 +142,13 @@ config LIB80211
you want this built into your kernel.
config LIB80211_CRYPT_WEP
- tristate
+ tristate "LIB80211_CRYPT_WEP"
config LIB80211_CRYPT_CCMP
- tristate
+ tristate "LIB80211_CRYPT_CCMP"
config LIB80211_CRYPT_TKIP
- tristate
+ tristate "LIB80211_CRYPT_TKIP"
config LIB80211_DEBUG
bool "lib80211 debugging messages"

View file

@ -1,47 +0,0 @@
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -31,7 +31,7 @@ config CRYPTO_FIPS
this is.
config CRYPTO_ALGAPI
- tristate
+ tristate "ALGAPI"
select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
@@ -40,7 +40,7 @@ config CRYPTO_ALGAPI2
tristate
config CRYPTO_AEAD
- tristate
+ tristate "AEAD"
select CRYPTO_AEAD2
select CRYPTO_ALGAPI
@@ -49,7 +49,7 @@ config CRYPTO_AEAD2
select CRYPTO_ALGAPI2
config CRYPTO_BLKCIPHER
- tristate
+ tristate "BLKCIPHER"
select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
@@ -60,7 +60,7 @@ config CRYPTO_BLKCIPHER2
select CRYPTO_WORKQUEUE
config CRYPTO_HASH
- tristate
+ tristate "HASH"
select CRYPTO_HASH2
select CRYPTO_ALGAPI
@@ -69,7 +69,7 @@ config CRYPTO_HASH2
select CRYPTO_ALGAPI2
config CRYPTO_RNG
- tristate
+ tristate "RNG"
select CRYPTO_RNG2
select CRYPTO_ALGAPI

View file

@ -1,22 +0,0 @@
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,5 +1,5 @@
config WIRELESS_EXT
- bool
+ bool "Wireless extensions"
config WEXT_CORE
def_bool y
@@ -11,10 +11,10 @@ config WEXT_PROC
depends on WEXT_CORE
config WEXT_SPY
- bool
+ bool "WEXT_SPY"
config WEXT_PRIV
- bool
+ bool "WEXT_PRIV"
config CFG80211
tristate "cfg80211 - wireless configuration API"

View file

@ -1,11 +0,0 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -2,7 +2,7 @@ menu "Core Netfilter Configuration"
depends on NET && INET && NETFILTER
config NETFILTER_NETLINK
- tristate
+ tristate "Netfilter NFNETLINK interface"
config NETFILTER_NETLINK_QUEUE
tristate "Netfilter NFQUEUE over NFNETLINK interface"

View file

@ -1,39 +0,0 @@
From: Mark Miller <mark@mirell.org>
This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
certain Broadcom chipsets running CFE in order to load the kernel.
Signed-off-by: Mark Miller <mark@mirell.org>
Acked-by: Rob Landley <rob@landley.net>
---
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -849,9 +849,6 @@ config ARC
config ARCH_MAY_HAVE_PC_FDC
bool
-config BOOT_RAW
- bool
-
config CEVT_BCM1480
bool
@@ -2292,6 +2289,18 @@ config USE_OF
help
Include support for flattened device tree machine descriptions.
+config BOOT_RAW
+ bool "Enable the kernel to be executed from the load address"
+ default n
+ help
+ Allow the kernel to be executed from the load address for
+ bootloaders which cannot read the ELF format. This places
+ a jump to start_kernel at the load address.
+
+ If unsure, say N.
+
+
+
endmenu
config LOCKDEP_SUPPORT

View file

@ -1,28 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -948,6 +948,10 @@ config SYNC_R4K
config MIPS_MACHINE
def_bool n
+config IMAGE_CMDLINE_HACK
+ bool "OpenWrt specific image command line hack"
+ default n
+
config NO_IOPORT
def_bool n
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -141,6 +141,12 @@ FEXPORT(__kernel_entry)
j kernel_entry
#endif
+#ifdef CONFIG_IMAGE_CMDLINE_HACK
+ .ascii "CMDLINE:"
+EXPORT(__image_cmdline)
+ .fill 0x400
+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
+
__REF
NESTED(kernel_entry, 16, sp) # kernel entry point

View file

@ -1,18 +0,0 @@
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -85,6 +85,7 @@ register struct thread_info *__current_t
#define STACK_WARN (THREAD_SIZE / 8)
+#if 0
#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
#ifdef CONFIG_DEBUG_STACK_USAGE
@@ -96,6 +97,7 @@ register struct thread_info *__current_t
#endif
#define free_thread_info(info) kfree(info)
+#endif
#endif /* !__ASSEMBLY__ */

View file

@ -1,11 +0,0 @@
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
reboot_code_buffer =
(unsigned long)page_address(image->control_code_page);
- kexec_start_address = image->start;
+ kexec_start_address = (unsigned long) phys_to_virt(image->start);
kexec_indirection_page =
(unsigned long) phys_to_virt(image->head & PAGE_MASK);

View file

@ -1,160 +0,0 @@
MIPS: allow disabling the kernel FPU emulator
This patch allows turning off the in-kernel Algorithmics
FPU emulator support, which allows one to save a couple of
precious blocks on an embedded system.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
--
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -933,6 +933,17 @@ config I8259
config MIPS_BONITO64
bool
+config MIPS_FPU_EMU
+ bool "Enable FPU emulation"
+ default y
+ help
+ This option allows building a kernel with or without the Algorithmics
+ FPU emulator enabled. Turning off this option results in a kernel which
+ does not catch floating operations exceptions. Make sure that your toolchain
+ is configured to enable software floating point emulation in that case.
+
+ If unsure say Y here.
+
config MIPS_MSC
bool
--- a/arch/mips/math-emu/Makefile
+++ b/arch/mips/math-emu/Makefile
@@ -2,11 +2,13 @@
# Makefile for the Linux/MIPS kernel FPU emulation.
#
-obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+obj-y := kernel_linkage.o dsemul.o cp1emu.o
+
+obj-$(CONFIG_MIPS_FPU_EMU) += ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
- dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
+ dp_sqrt.o sp_sqrt.o
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -58,7 +58,11 @@
#define __mips 4
/* Function which emulates a floating point instruction. */
+#ifdef CONFIG_DEBUG_FS
+DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+#endif
+#ifdef CONFIG_MIPS_FPU_EMU
static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
mips_instruction);
@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
/* Further private data for which no space exists in mips_fpu_struct */
-#ifdef CONFIG_DEBUG_FS
-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
-#endif
-
/* Control registers */
#define FPCREG_RID 0 /* $0 = revision id */
@@ -1360,7 +1360,6 @@ int fpu_emulator_cop1Handler(struct pt_r
return sig;
}
-
#ifdef CONFIG_DEBUG_FS
static int fpuemu_stat_get(void *data, u64 *val)
@@ -1409,4 +1408,11 @@ static int __init debugfs_fpuemu(void)
return 0;
}
__initcall(debugfs_fpuemu);
-#endif
+#endif /* CONFIG_DEBUGFS */
+#else
+int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+ int has_fpu)
+{
+ return 0;
+}
+#endif /* CONFIG_MIPS_FPU_EMU */
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
return SIGILL; /* force out of emulation loop */
}
+#ifdef CONFIG_MIPS_FPU_EMU
int do_dsemulret(struct pt_regs *xcp)
{
struct emuframe __user *fr;
@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
return 1;
}
+#else
+int do_dsemulret(struct pt_regs *xcp)
+{
+ return 0;
+}
+#endif /* CONFIG_MIPS_FPU_EMU */
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -29,6 +29,7 @@
#define SIGNALLING_NAN 0x7ff800007ff80000LL
+#ifdef CONFIG_MIPS_FPU_EMU
void fpu_emulator_init_fpu(void)
{
static int first = 1;
@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
return err;
}
-#endif
+#endif /* CONFIG_64BIT */
+#else
+
+void fpu_emulator_init_fpu(void)
+{
+ printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
+ "was compiled with software floating point support (soft-float)\n");
+ return;
+}
+
+int fpu_emulator_save_context(struct sigcontext __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_restore_context(struct sigcontext __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
+{
+ return 0;
+}
+
+int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
+{
+ return 0;
+}
+
+#ifdef CONFIG_64BIT
+#endif /* CONFIG_64BIT */
+#endif /* CONFIG_MIPS_FPU_EMU */

View file

@ -1,371 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -90,8 +90,8 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
-KBUILD_AFLAGS_MODULE += -mlong-calls
-KBUILD_CFLAGS_MODULE += -mlong-calls
+KBUILD_AFLAGS_MODULE += -mno-long-calls
+KBUILD_CFLAGS_MODULE += -mno-long-calls
cflags-y += -ffreestanding
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -9,6 +9,11 @@ struct mod_arch_specific {
struct list_head dbe_list;
const struct exception_table_entry *dbe_start;
const struct exception_table_entry *dbe_end;
+
+ void *phys_plt_tbl;
+ void *virt_plt_tbl;
+ unsigned int phys_plt_offset;
+ unsigned int virt_plt_offset;
};
typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -44,14 +44,219 @@ static struct mips_hi16 *mips_hi16_list;
static LIST_HEAD(dbe_list);
static DEFINE_SPINLOCK(dbe_lock);
-#ifdef MODULE_START
+/*
+ * Get the potential max trampolines size required of the init and
+ * non-init sections. Only used if we cannot find enough contiguous
+ * physically mapped memory to put the module into.
+ */
+static unsigned int
+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ const char *secstrings, unsigned int symindex, bool is_init)
+{
+ unsigned long ret = 0;
+ unsigned int i, j;
+ Elf_Sym *syms;
+
+ /* Everything marked ALLOC (this includes the exported symbols) */
+ for (i = 1; i < hdr->e_shnum; ++i) {
+ unsigned int info = sechdrs[i].sh_info;
+
+ if (sechdrs[i].sh_type != SHT_REL
+ && sechdrs[i].sh_type != SHT_RELA)
+ continue;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ /* Don't bother with non-allocated sections */
+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ continue;
+
+ /* If it's called *.init*, and we're not init, we're
+ not interested */
+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
+ != is_init)
+ continue;
+
+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
+ if (sechdrs[i].sh_type == SHT_REL) {
+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
+
+ for (j = 0; j < size; ++j) {
+ Elf_Sym *sym;
+
+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
+ continue;
+
+ sym = syms + ELF_MIPS_R_SYM(rel[j]);
+ if (!is_init && sym->st_shndx != SHN_UNDEF)
+ continue;
+
+ ret += 4 * sizeof(int);
+ }
+ } else {
+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
+
+ for (j = 0; j < size; ++j) {
+ Elf_Sym *sym;
+
+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
+ continue;
+
+ sym = syms + ELF_MIPS_R_SYM(rela[j]);
+ if (!is_init && sym->st_shndx != SHN_UNDEF)
+ continue;
+
+ ret += 4 * sizeof(int);
+ }
+ }
+ }
+
+ return ret;
+}
+
+#ifndef MODULE_START
+static void *alloc_phys(unsigned long size)
+{
+ unsigned order;
+ struct page *page;
+ struct page *p;
+
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
+ __GFP_THISNODE, order);
+ if (!page)
+ return NULL;
+
+ split_page(page, order);
+
+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
+ __free_page(p);
+
+ return page_address(page);
+}
+#endif
+
+static void free_phys(void *ptr, unsigned long size)
+{
+ struct page *page;
+ struct page *end;
+
+ page = virt_to_page(ptr);
+ end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
+
+ for (; page < end; ++page)
+ __free_page(page);
+}
+
+
void *module_alloc(unsigned long size)
{
+#ifdef MODULE_START
return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
GFP_KERNEL, PAGE_KERNEL, -1,
__builtin_return_address(0));
+#else
+ void *ptr;
+
+ if (size == 0)
+ return NULL;
+
+ ptr = alloc_phys(size);
+
+ /* If we failed to allocate physically contiguous memory,
+ * fall back to regular vmalloc. The module loader code will
+ * create jump tables to handle long jumps */
+ if (!ptr)
+ return vmalloc(size);
+
+ return ptr;
+#endif
}
+
+static inline bool is_phys_addr(void *ptr)
+{
+#ifdef CONFIG_64BIT
+ return (KSEGX((unsigned long)ptr) == CKSEG0);
+#else
+ return (KSEGX(ptr) == KSEG0);
#endif
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ if (is_phys_addr(module_region)) {
+ if (mod->module_init == module_region)
+ free_phys(module_region, mod->init_size);
+ else if (mod->module_core == module_region)
+ free_phys(module_region, mod->core_size);
+ else
+ BUG();
+ } else {
+ vfree(module_region);
+ }
+}
+
+static void *__module_alloc(int size, bool phys)
+{
+ void *ptr;
+
+ if (phys)
+ ptr = kmalloc(size, GFP_KERNEL);
+ else
+ ptr = vmalloc(size);
+ return ptr;
+}
+
+static void __module_free(void *ptr)
+{
+ if (is_phys_addr(ptr))
+ kfree(ptr);
+ else
+ vfree(ptr);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ char *secstrings, struct module *mod)
+{
+ unsigned int symindex = 0;
+ unsigned int core_size, init_size;
+ int i;
+
+ for (i = 1; i < hdr->e_shnum; i++)
+ if (sechdrs[i].sh_type == SHT_SYMTAB)
+ symindex = i;
+
+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
+
+ mod->arch.phys_plt_offset = 0;
+ mod->arch.virt_plt_offset = 0;
+ mod->arch.phys_plt_tbl = NULL;
+ mod->arch.virt_plt_tbl = NULL;
+
+ if ((core_size + init_size) == 0)
+ return 0;
+
+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
+ if (!mod->arch.phys_plt_tbl)
+ return -ENOMEM;
+
+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
+ if (!mod->arch.virt_plt_tbl) {
+ __module_free(mod->arch.phys_plt_tbl);
+ mod->arch.phys_plt_tbl = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
{
@@ -72,28 +277,36 @@ static int apply_r_mips_32_rela(struct m
return 0;
}
-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
+ void *start, Elf_Addr v)
{
- if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
- me->name);
- return -ENOEXEC;
- }
+ unsigned *tramp = start + *plt_offset;
+ *plt_offset += 4 * sizeof(int);
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
- "module %s: relocation overflow\n",
- me->name);
- return -ENOEXEC;
- }
+ /* adjust carry for addiu */
+ if (v & 0x00008000)
+ v += 0x10000;
- *location = (*location & ~0x03ffffff) |
- ((*location + (v >> 2)) & 0x03ffffff);
+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */
+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */
+ tramp[2] = 0x03200008; /* jr t9 */
+ tramp[3] = 0x00000000; /* nop */
- return 0;
+ return (Elf_Addr) tramp;
}
-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
+{
+ if (is_phys_addr(location))
+ return add_plt_entry_to(&me->arch.phys_plt_offset,
+ me->arch.phys_plt_tbl, v);
+ else
+ return add_plt_entry_to(&me->arch.virt_plt_offset,
+ me->arch.virt_plt_tbl, v);
+
+}
+
+static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
{
if (v % 4) {
pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
@@ -102,17 +315,31 @@ static int apply_r_mips_26_rela(struct m
}
if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
- printk(KERN_ERR
+ v = add_plt_entry(me, location, v + (ofs << 2));
+ if (!v) {
+ printk(KERN_ERR
"module %s: relocation overflow\n",
me->name);
- return -ENOEXEC;
+ return -ENOEXEC;
+ }
+ ofs = 0;
}
- *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
+ *location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
return 0;
}
+static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
+{
+ return set_r_mips_26(me, location, *location & 0x03ffffff, v);
+}
+
+static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
+{
+ return set_r_mips_26(me, location, 0, v);
+}
+
static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
{
struct mips_hi16 *n;
@@ -380,11 +607,32 @@ int module_finalize(const Elf_Ehdr *hdr,
list_add(&me->arch.dbe_list, &dbe_list);
spin_unlock_irq(&dbe_lock);
}
+
+ /* Get rid of the fixup trampoline if we're running the module
+ * from physically mapped address space */
+ if (me->arch.phys_plt_offset == 0) {
+ __module_free(me->arch.phys_plt_tbl);
+ me->arch.phys_plt_tbl = NULL;
+ }
+ if (me->arch.virt_plt_offset == 0) {
+ __module_free(me->arch.virt_plt_tbl);
+ me->arch.virt_plt_tbl = NULL;
+ }
+
return 0;
}
void module_arch_cleanup(struct module *mod)
{
+ if (mod->arch.phys_plt_tbl) {
+ __module_free(mod->arch.phys_plt_tbl);
+ mod->arch.phys_plt_tbl = NULL;
+ }
+ if (mod->arch.virt_plt_tbl) {
+ __module_free(mod->arch.virt_plt_tbl);
+ mod->arch.virt_plt_tbl = NULL;
+ }
+
spin_lock_irq(&dbe_lock);
list_del(&mod->arch.dbe_list);
spin_unlock_irq(&dbe_lock);

View file

@ -1,83 +0,0 @@
--- a/arch/mips/include/asm/string.h
+++ b/arch/mips/include/asm/string.h
@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
#define __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count);
+#define memset(__s, __c, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memset((__s), (__c), __len); \
+ else \
+ __ret = __builtin_memset((__s), (__c), __len); \
+ __ret; \
+})
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+#define memcpy(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memcpy((dst), (src), __len); \
+ else \
+ __ret = __builtin_memcpy((dst), (src), __len); \
+ __ret; \
+})
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+#define memmove(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = memmove((dst), (src), __len); \
+ else \
+ __ret = __builtin_memmove((dst), (src), __len); \
+ __ret; \
+})
+
+#define __HAVE_ARCH_MEMCMP
+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
#endif /* _ASM_STRING_H */
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -3,7 +3,7 @@
#
lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
- strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+ strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+++ b/arch/mips/lib/memcmp.c
@@ -0,0 +1,22 @@
+/*
+ * copied from linux/lib/string.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#undef memcmp
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res = 0;
+
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ if ((res = *su1 - *su2) != 0)
+ break;
+ return res;
+}
+EXPORT_SYMBOL(memcmp);
+

View file

@ -1,35 +0,0 @@
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
}
}
+static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
+{
+ return mipsxx_perfcount_handler();
+}
+
static int __init mipsxx_init(void)
{
int counters;
@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
save_perf_irq = perf_irq;
perf_irq = mipsxx_perfcount_handler;
+ if (cp0_perfcount_irq >= 0)
+ return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
+ IRQF_SHARED, "Perfcounter", save_perf_irq);
+
return 0;
}
@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
{
int counters = op_model_mipsxx_ops.num_counters;
+ if (cp0_perfcount_irq >= 0)
+ free_irq(cp0_perfcount_irq, save_perf_irq);
+
counters = counters_per_cpu_to_total(counters);
on_each_cpu(reset_counters, (void *)(long)counters, 1);

View file

@ -1,17 +0,0 @@
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -814,10 +814,13 @@ static inline void cpu_probe_mips(struct
__cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
- case PRID_IMP_24KE:
c->cputype = CPU_24K;
__cpu_name[cpu] = "MIPS 24Kc";
break;
+ case PRID_IMP_24KE:
+ c->cputype = CPU_24K;
+ __cpu_name[cpu] = "MIPS 24KEc";
+ break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
__cpu_name[cpu] = "MIPS 25Kc";

View file

@ -1,109 +0,0 @@
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -19,6 +19,8 @@
#define LONG_S_R sdr
#endif
+#include "prefetch.h"
+
#define EX(insn,reg,addr,handler) \
9: insn reg, addr; \
.section __ex_table,"a"; \
@@ -75,6 +77,8 @@ FEXPORT(__bzero)
bnez t0, .Lsmall_memset
andi t0, a0, LONGMASK /* aligned? */
+ prefetch_store a0, a2, t2, t3, t4
+
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
beqz t0, 1f
PTR_SUBU t0, LONGSIZE /* alignment in bytes */
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -354,7 +354,7 @@ unsigned long get_wchan(struct task_stru
#define prefetch(x) __builtin_prefetch((x), 0, 1)
#define ARCH_HAS_PREFETCHW
-#define prefetchw(x) __builtin_prefetch((x), 1, 1)
+#define prefetchw(x) do {} while (0)
#endif
--- /dev/null
+++ b/arch/mips/lib/prefetch.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Felix Fietkau <nbd@openwrt.org>
+ */
+
+.macro prefetch_store dst, size, temp1, temp2, temp3
+#ifdef CONFIG_CPU_MIPS32
+ li \temp1, ((1 << CONFIG_MIPS_L1_CACHE_SHIFT) - 1)
+ nor \temp1, \temp1, \temp1
+
+ and \temp2, \size, \temp1
+ beqz \temp2, 2f
+ nop
+
+ move \temp2, \dst
+ PTR_ADDIU \temp2, ((1 << CONFIG_MIPS_L1_CACHE_SHIFT) - 1)
+ and \temp2, \temp2, \temp1
+
+ move \temp3, \dst
+ PTR_ADDU \temp3, \size
+ and \temp3, \temp3, \temp1
+
+1: beq \temp2, \temp3, 2f
+ nop
+
+ pref 30, 0(\temp2)
+
+ b 1b
+ PTR_ADDIU \temp2, (1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+2:
+#endif
+.endm
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -182,6 +182,8 @@
.set at=v1
#endif
+#include "prefetch.h"
+
/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
@@ -199,6 +201,8 @@ FEXPORT(__copy_user)
*/
#define rem t8
+ prefetch_store a0, a2, t0, t1, t2
+
R10KCBARRIER(0(ra))
/*
* The "issue break"s below are very approximate.
--- a/arch/mips/lib/memcpy-inatomic.S
+++ b/arch/mips/lib/memcpy-inatomic.S
@@ -182,6 +182,8 @@
.set at=v1
#endif
+#include "prefetch.h"
+
/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
@@ -196,6 +198,8 @@ LEAF(__copy_user_inatomic)
*/
#define rem t8
+ prefetch_store dst, len, t0, t1, t2
+
/*
* The "issue break"s below are very approximate.
* Issue delays for dcache fills will perturb the schedule, as will

View file

@ -1,13 +0,0 @@
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -81,6 +81,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
return -ENOEXEC;
}
+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
+ ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ continue;
+
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {

View file

@ -1,31 +0,0 @@
Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
they still want to support gcc 3.3 -- well, we don't.
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -130,7 +130,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
KBUILD_CFLAGS += -mno-sched-epilog
endif
-cpu-as-$(CONFIG_4xx) += -Wa,-m405
+cpu-as-$(CONFIG_40x) += -Wa,-m405
+cpu-as-$(CONFIG_44x) += -Wa,-m440
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -38,10 +38,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
DTC_FLAGS ?= -p 1024
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405

View file

@ -1,10 +0,0 @@
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -94,7 +94,6 @@ else
endif
endif
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)

View file

@ -1,10 +0,0 @@
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/spinlock_types.h>
#include <linux/random.h>

View file

@ -1,616 +0,0 @@
From eee16330c9de9adf7880cce9f1d32e13f89706bb Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Tue, 11 Jan 2011 13:16:47 +0000
Subject: MIPS: Add crash and kdump support
From: http://patchwork.linux-mips.org/patch/1025/
Hello folks,
Please find here MIPS crash and kdump patches.
This is patch set of 3 patches:
1. generic MIPS changes (kernel);
2. MIPS Cavium Octeon board kexec/kdump code (kernel);
3. Kexec user space MIPS changes.
Patches were tested on the latest linux-mips@ git kernel and the latest
kexec-tools git on Cavium Octeon 50xx board.
I also made the same code working on RMI XLR/XLS boards for both
mips32 and mips64 kernels.
Best regards,
Maxim Uvarov.
------
[ Zhangjin: Several trivial building failure has been fixed.
Note: the 2nd patch can not be cleanly applied, but may be a good
reference for the other board development:
+ MIPS Cavium Octeon board kexec,kdump support
http://patchwork.linux-mips.org/patch/1026/
And the 3rd patch has already been merged into the mainline kexec-tools:
+ some kexec MIPS improvements
http://patchwork.linux-mips.org/patch/1027/
kexec-tools is available here:
+ http://horms.net/projects/kexec/
git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
]
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
(limited to 'arch/mips/kernel')
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -95,7 +95,8 @@ obj-$(CONFIG_I8253) += i8253.o
obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
--- /dev/null
+++ b/arch/mips/kernel/crash.c
@@ -0,0 +1,75 @@
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#ifdef CONFIG_CRASH_DUMP
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#endif
+
+/* This keeps a track of which one is crashing cpu. */
+int crashing_cpu = -1;
+static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+
+#ifdef CONFIG_SMP
+void crash_shutdown_secondary(void *ignore)
+{
+ struct pt_regs *regs;
+ int cpu = smp_processor_id();
+
+ regs = task_pt_regs(current);
+
+ if (!cpu_online(cpu))
+ return;
+
+ local_irq_disable();
+ if (!cpu_isset(cpu, cpus_in_crash))
+ crash_save_cpu(regs, cpu);
+ cpu_set(cpu, cpus_in_crash);
+
+ while (!atomic_read(&kexec_ready_to_reboot))
+ cpu_relax();
+ relocated_kexec_smp_wait(NULL);
+ /* NOTREACHED */
+}
+
+static void crash_kexec_prepare_cpus(void)
+{
+ unsigned int msecs;
+
+ unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+
+ dump_send_ipi(crash_shutdown_secondary);
+ smp_wmb();
+
+ /*
+ * The crash CPU sends an IPI and wait for other CPUs to
+ * respond. Delay of at least 10 seconds.
+ */
+ printk(KERN_EMERG "Sending IPI to other cpus...\n");
+ msecs = 10000;
+ while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+ cpu_relax();
+ mdelay(1);
+ }
+}
+
+#else
+static void crash_kexec_prepare_cpus(void) {}
+#endif
+
+void default_machine_crash_shutdown(struct pt_regs *regs)
+{
+ local_irq_disable();
+ crashing_cpu = smp_processor_id();
+ crash_save_cpu(regs, crashing_cpu);
+ crash_kexec_prepare_cpus();
+ cpu_set(crashing_cpu, cpus_in_crash);
+}
--- /dev/null
+++ b/arch/mips/kernel/crash_dump.c
@@ -0,0 +1,86 @@
+#include <linux/highmem.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_PROC_VMCORE
+static int __init parse_elfcorehdr(char *p)
+{
+ if (p)
+ elfcorehdr_addr = memparse(p, &p);
+ return 1;
+}
+__setup("elfcorehdr=", parse_elfcorehdr);
+#endif
+
+static int __init parse_savemaxmem(char *p)
+{
+ if (p)
+ saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
+
+ return 1;
+}
+__setup("savemaxmem=", parse_savemaxmem);
+
+
+static void *kdump_buf_page;
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ * space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ * otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel.
+ *
+ * Calling copy_to_user() in atomic context is not desirable. Hence first
+ * copying the data to a pre-allocated kernel page and then copying to user
+ * space in non-atomic context.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset, int userbuf)
+{
+ void *vaddr;
+
+ if (!csize)
+ return 0;
+
+ vaddr = kmap_atomic_pfn(pfn, KM_PTE0);
+
+ if (!userbuf) {
+ memcpy(buf, (vaddr + offset), csize);
+ kunmap_atomic(vaddr, KM_PTE0);
+ } else {
+ if (!kdump_buf_page) {
+ printk(KERN_WARNING "Kdump: Kdump buffer page not"
+ " allocated\n");
+ return -EFAULT;
+ }
+ copy_page(kdump_buf_page, vaddr);
+ kunmap_atomic(vaddr, KM_PTE0);
+ if (copy_to_user(buf, (kdump_buf_page + offset), csize))
+ return -EFAULT;
+ }
+
+ return csize;
+}
+
+static int __init kdump_buf_page_init(void)
+{
+ int ret = 0;
+
+ kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!kdump_buf_page) {
+ printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer"
+ " page\n");
+ ret = -ENOMEM;
+ }
+
+ return ret;
+}
+arch_initcall(kdump_buf_page_init);
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -19,9 +19,19 @@ extern const size_t relocate_new_kernel_
extern unsigned long kexec_start_address;
extern unsigned long kexec_indirection_page;
+int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+void (*_machine_kexec_shutdown)(void) = NULL;
+void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
+#ifdef CONFIG_SMP
+void (*relocated_kexec_smp_wait) (void *);
+atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+#endif
+
int
machine_kexec_prepare(struct kimage *kimage)
{
+ if (_machine_kexec_prepare)
+ return _machine_kexec_prepare(kimage);
return 0;
}
@@ -33,11 +43,17 @@ machine_kexec_cleanup(struct kimage *kim
void
machine_shutdown(void)
{
+ if (_machine_kexec_shutdown)
+ _machine_kexec_shutdown();
}
void
machine_crash_shutdown(struct pt_regs *regs)
{
+ if (_machine_crash_shutdown)
+ _machine_crash_shutdown(regs);
+ else
+ default_machine_crash_shutdown(regs);
}
typedef void (*noretfun_t)(void) __attribute__((noreturn));
@@ -52,7 +68,9 @@ machine_kexec(struct kimage *image)
reboot_code_buffer =
(unsigned long)page_address(image->control_code_page);
- kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ kexec_start_address =
+ (unsigned long) phys_to_virt(image->start);
+
kexec_indirection_page =
(unsigned long) phys_to_virt(image->head & PAGE_MASK);
@@ -63,7 +81,7 @@ machine_kexec(struct kimage *image)
* The generic kexec code builds a page list with physical
* addresses. they are directly accessible through KSEG0 (or
* CKSEG0 or XPHYS if on 64bit system), hence the
- * pys_to_virt() call.
+ * phys_to_virt() call.
*/
for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
ptr = (entry & IND_INDIRECTION) ?
@@ -81,5 +99,13 @@ machine_kexec(struct kimage *image)
printk("Will call new kernel at %08lx\n", image->start);
printk("Bye ...\n");
__flush_cache_all();
+#ifdef CONFIG_SMP
+ /* All secondary cpus now may jump to kexec_wait cycle */
+ relocated_kexec_smp_wait = reboot_code_buffer +
+ (void *)(kexec_smp_wait - relocate_new_kernel);
+ smp_wmb();
+ atomic_set(&kexec_ready_to_reboot, 1);
+#endif
((noretfun_t) reboot_code_buffer)();
}
+
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -15,6 +15,11 @@
#include <asm/addrspace.h>
LEAF(relocate_new_kernel)
+ PTR_L a0, arg0
+ PTR_L a1, arg1
+ PTR_L a2, arg2
+ PTR_L a3, arg3
+
PTR_L s0, kexec_indirection_page
PTR_L s1, kexec_start_address
@@ -26,7 +31,6 @@ process_entry:
and s3, s2, 0x1
beq s3, zero, 1f
and s4, s2, ~0x1 /* store destination addr in s4 */
- move a0, s4
b process_entry
1:
@@ -60,23 +64,100 @@ copy_word:
b process_entry
done:
+#ifdef CONFIG_SMP
+ /* kexec_flag reset is signal to other CPUs what kernel
+ was moved to it's location. Note - we need relocated address
+ of kexec_flag. */
+
+ bal 1f
+ 1: move t1,ra;
+ PTR_LA t2,1b
+ PTR_LA t0,kexec_flag
+ PTR_SUB t0,t0,t2;
+ PTR_ADD t0,t1,t0;
+ LONG_S zero,(t0)
+#endif
+
+ sync
/* jump to kexec_start_address */
j s1
END(relocate_new_kernel)
-kexec_start_address:
- EXPORT(kexec_start_address)
+#ifdef CONFIG_SMP
+/*
+ * Other CPUs should wait until code is relocated and
+ * then start at entry (?) point.
+ */
+LEAF(kexec_smp_wait)
+ PTR_L a0, s_arg0
+ PTR_L a1, s_arg1
+ PTR_L a2, s_arg2
+ PTR_L a3, s_arg3
+ PTR_L s1, kexec_start_address
+
+ /* Non-relocated address works for args and kexec_start_address ( old
+ * kernel is not overwritten). But we need relocated address of
+ * kexec_flag.
+ */
+
+ bal 1f
+1: move t1,ra;
+ PTR_LA t2,1b
+ PTR_LA t0,kexec_flag
+ PTR_SUB t0,t0,t2;
+ PTR_ADD t0,t1,t0;
+
+1: LONG_L s0, (t0)
+ bne s0, zero,1b
+
+ sync
+ j s1
+ END(kexec_smp_wait)
+#endif
+
+#ifdef __mips64
+ /* all PTR's must be aligned to 8 byte in 64-bit mode */
+ .align 3
+#endif
+
+/* All parameters to new kernel are passed in registers a0-a3.
+ * kexec_args[0..3] are uses to prepare register values.
+ */
+
+EXPORT(kexec_args)
+arg0: PTR 0x0
+arg1: PTR 0x0
+arg2: PTR 0x0
+arg3: PTR 0x0
+ .size kexec_args,PTRSIZE*4
+
+#ifdef CONFIG_SMP
+/*
+ * Secondary CPUs may have different kernel parameters in
+ * their registers a0-a3. secondary_kexec_args[0..3] are used
+ * to prepare register values.
+ */
+EXPORT(secondary_kexec_args)
+s_arg0: PTR 0x0
+s_arg1: PTR 0x0
+s_arg2: PTR 0x0
+s_arg3: PTR 0x0
+ .size secondary_kexec_args,PTRSIZE*4
+kexec_flag:
+ LONG 0x1
+
+#endif
+
+EXPORT(kexec_start_address)
PTR 0x0
.size kexec_start_address, PTRSIZE
-kexec_indirection_page:
- EXPORT(kexec_indirection_page)
+EXPORT(kexec_indirection_page)
PTR 0
.size kexec_indirection_page, PTRSIZE
relocate_new_kernel_end:
-relocate_new_kernel_size:
- EXPORT(relocate_new_kernel_size)
+EXPORT(relocate_new_kernel_size)
PTR relocate_new_kernel_end - relocate_new_kernel
.size relocate_new_kernel_size, PTRSIZE
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -21,6 +21,7 @@
#include <linux/console.h>
#include <linux/pfn.h>
#include <linux/debugfs.h>
+#include <linux/kexec.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@@ -488,12 +489,62 @@ static void __init arch_mem_init(char **
}
bootmem_init();
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1,
+ BOOTMEM_DEFAULT);
+#endif
device_tree_init();
sparse_init();
plat_swiotlb_setup();
paging_init();
}
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+ unsigned long long total;
+ total = max_pfn - min_low_pfn;
+ return total << PAGE_SHIFT;
+}
+
+static void __init mips_parse_crashkernel(void)
+{
+ unsigned long long total_mem;
+ unsigned long long crash_size, crash_base;
+ int ret;
+
+ total_mem = get_total_mem();
+ ret = parse_crashkernel(boot_command_line, total_mem,
+ &crash_size, &crash_base);
+ if (ret != 0 || crash_size <= 0)
+ return;
+
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+}
+static void __init request_crashkernel(struct resource *res)
+{
+ int ret;
+
+ ret = request_resource(res, &crashk_res);
+ if (!ret)
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel\n",
+ (unsigned long)((crashk_res.end -
+ crashk_res.start + 1) >> 20),
+ (unsigned long)(crashk_res.start >> 20));
+}
+#else
+static void __init mips_parse_crashkernel(void)
+{
+}
+static void __init request_crashkernel(struct resource *res)
+{
+}
+#endif
+
static void __init resource_init(void)
{
int i;
@@ -509,6 +560,8 @@ static void __init resource_init(void)
/*
* Request address space for all standard RAM.
*/
+ mips_parse_crashkernel();
+
for (i = 0; i < boot_mem_map.nr_map; i++) {
struct resource *res;
unsigned long start, end;
@@ -544,6 +597,7 @@ static void __init resource_init(void)
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
+ request_crashkernel(res);
}
}
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -433,3 +433,21 @@ void flush_tlb_one(unsigned long vaddr)
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(flush_tlb_one);
+
+#if defined(CONFIG_KEXEC)
+void (*dump_ipi_function_ptr)(void *) = NULL;
+void dump_send_ipi(void (*dump_ipi_callback)(void *))
+{
+ int i;
+ int cpu = smp_processor_id();
+
+ dump_ipi_function_ptr = dump_ipi_callback;
+ smp_mb();
+ for_each_online_cpu(i)
+ if (i != cpu)
+ core_send_ipi(i, SMP_DUMP);
+
+}
+EXPORT_SYMBOL(dump_send_ipi);
+#endif
+
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -9,22 +9,45 @@
#ifndef _MIPS_KEXEC
# define _MIPS_KEXEC
+#include <asm/stacktrace.h>
+
+extern unsigned long long elfcorehdr_addr;
+
/* Maximum physical address we can use pages from */
#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
/* Maximum address we can reach in physical address mode */
#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
-
-#define KEXEC_CONTROL_PAGE_SIZE 4096
+/* Reserve 3*4096 bytes for board-specific info */
+#define KEXEC_CONTROL_PAGE_SIZE (4096 + 3*4096)
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_MIPS
+#define MAX_NOTE_BYTES 1024
static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs)
+ struct pt_regs *oldregs)
{
- /* Dummy implementation for now */
+ if (oldregs)
+ memcpy(newregs, oldregs, sizeof(*newregs));
+ else
+ prepare_frametrace(newregs);
}
+#ifdef CONFIG_KEXEC
+struct kimage;
+extern unsigned long kexec_args[4];
+extern int (*_machine_kexec_prepare)(struct kimage *);
+extern void (*_machine_kexec_shutdown)(void);
+extern void (*_machine_crash_shutdown)(struct pt_regs *regs);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+#ifdef CONFIG_SMP
+extern const unsigned char kexec_smp_wait[];
+extern unsigned long secondary_kexec_args[4];
+extern void (*relocated_kexec_smp_wait) (void *);
+extern atomic_t kexec_ready_to_reboot;
+#endif
+#endif
+
#endif /* !_MIPS_KEXEC */
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -40,6 +40,8 @@ extern int __cpu_logical_map[NR_CPUS];
#define SMP_CALL_FUNCTION 0x2
/* Octeon - Tell another core to flush its icache */
#define SMP_ICACHE_FLUSH 0x4
+/* Used by kexec crashdump to save all cpu's state */
+#define SMP_DUMP 0x8
extern volatile cpumask_t cpu_callin_map;
@@ -91,4 +93,9 @@ static inline void arch_send_call_functi
mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
}
+extern void core_send_ipi(int cpu, unsigned int action);
+#if defined(CONFIG_KEXEC)
+extern void (*dump_ipi_function_ptr)(void *);
+void dump_send_ipi(void (*dump_ipi_callback)(void *));
+#endif
#endif /* __ASM_SMP_H */

View file

@ -1,159 +0,0 @@
From 03cd81fbca6b91317ec1a7b3b3c09fb8d08f83a6 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Tue, 11 Jan 2011 18:42:08 +0000
Subject: MIPS: Kexec: Enhance the support
Changes:
o Print more information in machine_kexec() for debugging
E.g. with this information, the kexec_start_address has been found
it was wrong with 64bit kernel / o32 kexec-tools. Which must be
fixed later.
o Link relocate_kernel.S to a section for future extension
This allows more functions can be added for the kexec relocation
part even written in C. to add code into that section, you just need
to mark your function or data with __kexec or
__attribute__((__section__(".__kexec.relocate")))
TODO:
1. Make 64bit kernel / o32|n32|64 kexec-tools works
Fix the user-space kexec-tools, seems the tool only work for 32bit
machine. So, we need to add 64bit support for it. The address of the
entry point(kexec_start_address) is wrong and make the "kexec -e" fail.
the real entry point must be read from the new kernel image by the
user-space kexec-tools, otherwise, it will not work. The above 64bit
support tested is 64bit kernel with o32 user-space kexec-tools. The root
cause may be the different definition of virt_to_phys() and
phys_to_virt() in the kexec-tools and kernel space for 64bit system /
o32 kernel.
Ref: http://www.linux-mips.org/archives/linux-mips/2009-08/msg00149.html
2. Pass the arguments from kexec-tools to the new kernel image
Please refer to: "MIPS: Loongson: Kexec: Pass parameters to new kernel"
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -36,6 +36,16 @@ static inline void crash_setup_regs(stru
}
#ifdef CONFIG_KEXEC
+
+#define __kexec __attribute__((__section__(".__kexec.relocate")))
+
+/* The linker tells us where the relocate_new_kernel part is. */
+extern const unsigned char __start___kexec_relocate;
+extern const unsigned char __end___kexec_relocate;
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+
struct kimage;
extern unsigned long kexec_args[4];
extern int (*_machine_kexec_prepare)(struct kimage *);
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -13,12 +13,6 @@
#include <asm/cacheflush.h>
#include <asm/page.h>
-extern const unsigned char relocate_new_kernel[];
-extern const size_t relocate_new_kernel_size;
-
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-
int (*_machine_kexec_prepare)(struct kimage *) = NULL;
void (*_machine_kexec_shutdown)(void) = NULL;
void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
@@ -61,21 +55,34 @@ typedef void (*noretfun_t)(void) __attri
void
machine_kexec(struct kimage *image)
{
+ unsigned long kexec_relocate_size;
unsigned long reboot_code_buffer;
unsigned long entry;
unsigned long *ptr;
+ kexec_relocate_size = (unsigned long)(&__end___kexec_relocate) -
+ (unsigned long)(&__start___kexec_relocate);
+ pr_info("kexec_relocate_size = %lu\n", kexec_relocate_size);
+
reboot_code_buffer =
(unsigned long)page_address(image->control_code_page);
+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
kexec_start_address =
(unsigned long) phys_to_virt(image->start);
+ pr_info("kexec_start_address(entry point of new kernel) = %p\n",
+ (void *)kexec_start_address);
kexec_indirection_page =
(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ pr_info("kexec_indirection_page = %p\n",
+ (void *)kexec_indirection_page);
- memcpy((void*)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
+ memcpy((void *)reboot_code_buffer, &__start___kexec_relocate,
+ kexec_relocate_size);
+
+ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
+ &__start___kexec_relocate, (void *)reboot_code_buffer);
/*
* The generic kexec code builds a page list with physical
@@ -96,8 +103,8 @@ machine_kexec(struct kimage *image)
*/
local_irq_disable();
- printk("Will call new kernel at %08lx\n", image->start);
- printk("Bye ...\n");
+ pr_info("Will call new kernel at %p\n", (void *)kexec_start_address);
+ pr_info("Bye ...\n");
__flush_cache_all();
#ifdef CONFIG_SMP
/* All secondary cpus now may jump to kexec_wait cycle */
@@ -108,4 +115,3 @@ machine_kexec(struct kimage *image)
#endif
((noretfun_t) reboot_code_buffer)();
}
-
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -14,6 +14,8 @@
#include <asm/stackframe.h>
#include <asm/addrspace.h>
+ .section .kexec.relocate, "ax"
+
LEAF(relocate_new_kernel)
PTR_L a0, arg0
PTR_L a1, arg1
@@ -155,9 +157,3 @@ EXPORT(kexec_start_address)
EXPORT(kexec_indirection_page)
PTR 0
.size kexec_indirection_page, PTRSIZE
-
-relocate_new_kernel_end:
-
-EXPORT(relocate_new_kernel_size)
- PTR relocate_new_kernel_end - relocate_new_kernel
- .size relocate_new_kernel_size, PTRSIZE
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -50,6 +50,10 @@ SECTIONS
*(.text.*)
*(.fixup)
*(.gnu.warning)
+ __start___kexec_relocate = .;
+ KEEP(*(.kexec.relocate))
+ KEEP(*(.__kexec.relocate))
+ __end___kexec_relocate = .;
} :text = 0
_etext = .; /* End of text section */

View file

@ -1,52 +0,0 @@
From 49d07a29653b1f2c6ae273b3d8fe93d981f43004 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Wed, 12 Jan 2011 20:59:32 +0000
Subject: MIPS: Kexec: Init the arguments for the new kernel image
Whenever the kexec-tools pass the command lines to the new kernel image,
init the arguments as the ones for the 1st kernel image. This fixed the
booting failure of Kexec on YeeLoong.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/delay.h>
+#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
@@ -21,9 +22,30 @@ void (*relocated_kexec_smp_wait) (void *
atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
#endif
+static void machine_kexec_init_args(void)
+{
+ kexec_args[0] = fw_arg0;
+ kexec_args[1] = fw_arg1;
+ kexec_args[2] = fw_arg2;
+ kexec_args[3] = fw_arg3;
+
+ pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]);
+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
+}
+
int
machine_kexec_prepare(struct kimage *kimage)
{
+ /*
+ * Whenever arguments passed from kexec-tools, Init the arguments as
+ * the original ones to avoid booting failure.
+ *
+ * This can be overrided by _machine_kexec_prepare().
+ */
+ machine_kexec_init_args();
+
if (_machine_kexec_prepare)
return _machine_kexec_prepare(kimage);
return 0;

View file

@ -1,88 +0,0 @@
From 240c76841b26f1b09aaced33414ee1d08b6454cf Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Sat, 15 Jan 2011 12:46:03 +0000
Subject: MIPS: Get kernel parameters from kexec-tools
Before, we simply use the command lines from the original bootloader,
but it is not convenient. Now, we accept the kernel parameters from the
--command-line or --append option of the kexec-tools. But If not
--command-line or --apend option indicated, will fall back to use the
ones from the original bootloader.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
+#include <asm/uaccess.h>
int (*_machine_kexec_prepare)(struct kimage *) = NULL;
void (*_machine_kexec_shutdown)(void) = NULL;
@@ -35,6 +36,56 @@ static void machine_kexec_init_args(void
pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
}
+#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
+
+int machine_kexec_pass_args(struct kimage *image)
+{
+ int i, argc = 0;
+ char *bootloader = "kexec";
+ int *kexec_argv = (int *)kexec_args[1];
+
+ for (i = 0; i < image->nr_segments; i++) {
+ if (!strncmp(bootloader, (char *)image->segment[i].buf,
+ strlen(bootloader))) {
+ /*
+ * convert command line string to array
+ * of parameters (as bootloader does).
+ */
+ /*
+ * Note: we do treat the 1st string "kexec" as an
+ * argument ;-) so, argc here is 1.
+ */
+ char *str = (char *)image->segment[i].buf;
+ char *ptr = strchr(str, ' ');
+ char *kbuf = (char *)kexec_argv[0];
+ /* Whenever --command-line or --append used, "kexec" is copied */
+ argc = 1;
+ /* Parse the offset */
+ while (ptr && (ARGV_MAX_ARGS > argc)) {
+ *ptr = '\0';
+ if (ptr[1] != ' ' && ptr[1] != '\0') {
+ int offt = (int)(ptr - str + 1);
+ kexec_argv[argc] = (int)kbuf + offt;
+ argc++;
+ }
+ ptr = strchr(ptr + 1, ' ');
+ }
+ if (argc > 1) {
+ /* Copy to kernel space */
+ copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz);
+ fw_arg0 = kexec_args[0] = argc;
+ }
+ break;
+ }
+ }
+
+ pr_info("argc = %lu\n", kexec_args[0]);
+ for (i = 0; i < kexec_args[0]; i++)
+ pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]);
+
+ return 0;
+}
+
int
machine_kexec_prepare(struct kimage *kimage)
{
@@ -45,6 +96,7 @@ machine_kexec_prepare(struct kimage *kim
* This can be overrided by _machine_kexec_prepare().
*/
machine_kexec_init_args();
+ machine_kexec_pass_args(kimage);
if (_machine_kexec_prepare)
return _machine_kexec_prepare(kimage);

View file

@ -1,83 +0,0 @@
From 4aded085fa0057a9a1e1dcec631f950307360c1f Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Tue, 11 Jan 2011 13:46:19 +0000
Subject: MIPS: Fix compiling failure of relocate_kernel.S
The following errors is fixed with the help of <asm/asm_nosec.h>. for
this file need to put different symbols in the same section, the
original LEAF, NESTED and EXPORT (without explicit section indication)
must be used, <asm/asm_nosec.h> does it.
arch/mips/kernel/relocate_kernel.S: Assembler messages:
arch/mips/kernel/relocate_kernel.S:162: Error: operation combines symbols in different segments
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
---
(limited to 'arch/mips/kernel')
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -7,6 +7,7 @@
*/
#include <asm/asm.h>
+#include <asm/asm_nosec.h>
#include <asm/asmmacro.h>
#include <asm/regdef.h>
#include <asm/page.h>
--- /dev/null
+++ b/arch/mips/include/asm/asm_nosec.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ * Copyright (C) 2010 Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * Derive from <asm/asm.h>
+ *
+ * Override the macros without -ffunction-sections and -fdata-sections support.
+ * If several functions or data must be put in the same section, please include
+ * this header file after the <asm/asm.h> to override the generic definition.
+ */
+
+#ifndef __ASM_ASM_NOSEC_H
+#define __ASM_ASM_NOSEC_H
+
+#undef LEAF
+#undef NESTED
+#undef EXPORT
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, framesize, rpc
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol) \
+ .globl symbol; \
+symbol:
+
+#endif /* __ASM_ASM_NOSEC_H */

View file

@ -1,186 +0,0 @@
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -23,67 +23,104 @@ void (*relocated_kexec_smp_wait) (void *
atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
#endif
-static void machine_kexec_init_args(void)
+#define KEXEC_MIPS_ARGV_BUF_SIZE COMMAND_LINE_SIZE
+#define KEXEC_MIPS_ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
+
+char kexec_argv_buf[KEXEC_MIPS_ARGV_BUF_SIZE] __kexec;
+char *kexec_argv[KEXEC_MIPS_ARGV_MAX_ARGS] __kexec;
+
+static void
+machine_kexec_print_args(void)
{
- kexec_args[0] = fw_arg0;
- kexec_args[1] = fw_arg1;
- kexec_args[2] = fw_arg2;
- kexec_args[3] = fw_arg3;
+ int i;
pr_info("kexec_args[0] (argc): %lu\n", kexec_args[0]);
pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-}
-#define ARGV_MAX_ARGS (COMMAND_LINE_SIZE / 15)
+ for (i = 0; i < kexec_args[0]; i++)
+ pr_info("kexec_argv[%d] = %p, %s\n", i,
+ (char *)kexec_argv[i], (char *)kexec_argv[i]);
+}
-int machine_kexec_pass_args(struct kimage *image)
+static void
+machine_kexec_init_argv(struct kimage *image)
{
- int i, argc = 0;
- char *bootloader = "kexec";
- int *kexec_argv = (int *)kexec_args[1];
+ void __user *buf = NULL;
+ size_t bufsz;
+ size_t size;
+ int i;
+ bufsz = 0;
for (i = 0; i < image->nr_segments; i++) {
- if (!strncmp(bootloader, (char *)image->segment[i].buf,
- strlen(bootloader))) {
- /*
- * convert command line string to array
- * of parameters (as bootloader does).
- */
- /*
- * Note: we do treat the 1st string "kexec" as an
- * argument ;-) so, argc here is 1.
- */
- char *str = (char *)image->segment[i].buf;
- char *ptr = strchr(str, ' ');
- char *kbuf = (char *)kexec_argv[0];
- /* Whenever --command-line or --append used, "kexec" is copied */
- argc = 1;
- /* Parse the offset */
- while (ptr && (ARGV_MAX_ARGS > argc)) {
- *ptr = '\0';
- if (ptr[1] != ' ' && ptr[1] != '\0') {
- int offt = (int)(ptr - str + 1);
- kexec_argv[argc] = (int)kbuf + offt;
- argc++;
- }
- ptr = strchr(ptr + 1, ' ');
- }
- if (argc > 1) {
- /* Copy to kernel space */
- copy_from_user(kbuf, (char *)image->segment[i].buf, image->segment[i].bufsz);
- fw_arg0 = kexec_args[0] = argc;
- }
- break;
+ struct kexec_segment *seg;
+
+ seg = &image->segment[i];
+ if (seg->bufsz < 6)
+ continue;
+
+ if (strncmp((char *) seg->buf, "kexec", 5))
+ continue;
+
+ /* don't copy "kexec" */
+ buf = seg->buf + 5;
+ bufsz = seg->bufsz - 5;
+ break;
+ }
+
+ if (!buf)
+ return;
+
+ size = KEXEC_MIPS_ARGV_BUF_SIZE - 1;
+ size = min(size, bufsz);
+ if (size < bufsz)
+ pr_warn("kexec command line truncated to %zd bytes\n", size);
+
+ /* Copy to kernel space */
+ copy_from_user(kexec_argv_buf, buf, size);
+}
+
+static void
+machine_kexec_parse_argv(struct kimage *image)
+{
+ char *reboot_code_buffer;
+ int reloc_delta;
+ char *ptr;
+ int argc;
+ int i;
+
+ ptr = kexec_argv_buf;
+ argc = 0;
+
+ /*
+ * convert command line string to array of parameters
+ * (as bootloader does).
+ */
+ while (ptr && *ptr && (KEXEC_MIPS_ARGV_MAX_ARGS > argc)) {
+ if (*ptr == ' ') {
+ *ptr++ = '\0';
+ continue;
}
+
+ kexec_argv[argc++] = ptr;
+ ptr = strchr(ptr, ' ');
}
- pr_info("argc = %lu\n", kexec_args[0]);
- for (i = 0; i < kexec_args[0]; i++)
- pr_info("argv[%d] = %p, %s\n", i, (char *)kexec_argv[i], (char *)kexec_argv[i]);
+ if (!argc)
+ return;
- return 0;
+ kexec_args[0] = argc;
+ kexec_args[1] = (unsigned long)kexec_argv;
+ kexec_args[2] = 0;
+ kexec_args[3] = 0;
+
+ reboot_code_buffer = page_address(image->control_code_page);
+ reloc_delta = reboot_code_buffer - (char *) &__start___kexec_relocate;
+
+ kexec_args[1] += reloc_delta;
+ for (i = 0; i < argc; i++)
+ kexec_argv[i] += reloc_delta;
}
int
@@ -95,8 +132,14 @@ machine_kexec_prepare(struct kimage *kim
*
* This can be overrided by _machine_kexec_prepare().
*/
- machine_kexec_init_args();
- machine_kexec_pass_args(kimage);
+
+ kexec_args[0] = fw_arg0;
+ kexec_args[1] = fw_arg1;
+ kexec_args[2] = fw_arg2;
+ kexec_args[3] = fw_arg3;
+
+ machine_kexec_init_argv(kimage);
+ machine_kexec_parse_argv(kimage);
if (_machine_kexec_prepare)
return _machine_kexec_prepare(kimage);
@@ -152,11 +195,13 @@ machine_kexec(struct kimage *image)
pr_info("kexec_indirection_page = %p\n",
(void *)kexec_indirection_page);
+ pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
+ &__start___kexec_relocate, (void *)reboot_code_buffer);
+
memcpy((void *)reboot_code_buffer, &__start___kexec_relocate,
kexec_relocate_size);
- pr_info("Copy kexec_relocate section from %p to reboot_code_buffer: %p\n",
- &__start___kexec_relocate, (void *)reboot_code_buffer);
+ machine_kexec_print_args();
/*
* The generic kexec code builds a page list with physical

View file

@ -1,20 +0,0 @@
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2283,12 +2283,15 @@ static void dynamic_debug_remove(struct
void * __weak module_alloc(unsigned long size)
{
- return size == 0 ? NULL : vmalloc_exec(size);
+ return vmalloc_exec(size);
}
static void *module_alloc_update_bounds(unsigned long size)
{
- void *ret = module_alloc(size);
+ void *ret = NULL;
+
+ if (size)
+ ret = module_alloc(size);
if (ret) {
mutex_lock(&module_mutex);

View file

@ -1,11 +0,0 @@
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -127,7 +127,7 @@ ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)

View file

@ -1,327 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -23,6 +23,14 @@ config MTD_TESTS
WARNING: some of the tests will ERASE entire MTD device which they
test. Do not use these tests unless you really know what you do.
+config MTD_ROOTFS_ROOT_DEV
+ bool "Automatically set 'rootfs' partition to be root filesystem"
+ default y
+
+config MTD_ROOTFS_SPLIT
+ bool "Automatically split 'rootfs' partition for squashfs"
+ default y
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
---help---
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -29,6 +29,8 @@
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/root_dev.h>
+#include <linux/magic.h>
#include <linux/err.h>
#include "mtdcore.h"
@@ -50,7 +52,7 @@ struct mtd_part {
* the pointer to that structure with this macro.
*/
#define PART(x) ((struct mtd_part *)(x))
-
+#define IS_PART(mtd) (mtd->read == part_read)
/*
* MTD methods which simply translate the effective address and pass through
@@ -650,6 +652,155 @@ int mtd_del_partition(struct mtd_info *m
}
EXPORT_SYMBOL_GPL(mtd_del_partition);
+#ifdef CONFIG_MTD_ROOTFS_SPLIT
+#define ROOTFS_SPLIT_NAME "rootfs_data"
+#define ROOTFS_REMOVED_NAME "<removed>"
+
+struct squashfs_super_block {
+ __le32 s_magic;
+ __le32 pad0[9];
+ __le64 bytes_used;
+};
+
+
+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
+{
+ struct squashfs_super_block sb;
+ int len, ret;
+
+ ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
+ if (ret || (len != sizeof(sb))) {
+ printk(KERN_ALERT "split_squashfs: error occured while reading "
+ "from \"%s\"\n", master->name);
+ return -EINVAL;
+ }
+
+ if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
+ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
+ master->name);
+ *split_offset = 0;
+ return 0;
+ }
+
+ if (le64_to_cpu((sb.bytes_used)) <= 0) {
+ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
+ master->name);
+ *split_offset = 0;
+ return 0;
+ }
+
+ len = (u32) le64_to_cpu(sb.bytes_used);
+ len += (offset & 0x000fffff);
+ len += (master->erasesize - 1);
+ len &= ~(master->erasesize - 1);
+ len -= (offset & 0x000fffff);
+ *split_offset = offset + len;
+
+ return 0;
+}
+
+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
+{
+ struct mtd_partition *dpart;
+ struct mtd_part *slave = NULL;
+ struct mtd_part *spart;
+ int ret, split_offset = 0;
+
+ spart = PART(rpart);
+ ret = split_squashfs(master, spart->offset, &split_offset);
+ if (ret)
+ return ret;
+
+ if (split_offset <= 0)
+ return 0;
+
+ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
+ if (dpart == NULL) {
+ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
+ ROOTFS_SPLIT_NAME);
+ return -ENOMEM;
+ }
+
+ memcpy(dpart, part, sizeof(*part));
+ dpart->name = (unsigned char *)&dpart[1];
+ strcpy(dpart->name, ROOTFS_SPLIT_NAME);
+
+ dpart->size = rpart->size - (split_offset - spart->offset);
+ dpart->offset = split_offset;
+
+ if (dpart == NULL)
+ return 1;
+
+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
+ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
+
+ slave = allocate_partition(master, dpart, 0, split_offset);
+ if (IS_ERR(slave))
+ return PTR_ERR(slave);
+ mutex_lock(&mtd_partitions_mutex);
+ list_add(&slave->list, &mtd_partitions);
+ mutex_unlock(&mtd_partitions_mutex);
+
+ add_mtd_device(&slave->mtd);
+
+ rpart->split = &slave->mtd;
+
+ return 0;
+}
+
+static int refresh_rootfs_split(struct mtd_info *mtd)
+{
+ struct mtd_partition tpart;
+ struct mtd_part *part;
+ char *name;
+ //int index = 0;
+ int offset, size;
+ int ret;
+
+ part = PART(mtd);
+
+ /* check for the new squashfs offset first */
+ ret = split_squashfs(part->master, part->offset, &offset);
+ if (ret)
+ return ret;
+
+ if ((offset > 0) && !mtd->split) {
+ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
+ /* if we don't have a rootfs split partition, create a new one */
+ tpart.name = (char *) mtd->name;
+ tpart.size = mtd->size;
+ tpart.offset = part->offset;
+
+ return split_rootfs_data(part->master, &part->mtd, &tpart);
+ } else if ((offset > 0) && mtd->split) {
+ /* update the offsets of the existing partition */
+ size = mtd->size + part->offset - offset;
+
+ part = PART(mtd->split);
+ part->offset = offset;
+ part->mtd.size = size;
+ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
+ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
+ (u32) part->offset, (u32) part->mtd.size);
+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
+ strcpy(name, ROOTFS_SPLIT_NAME);
+ part->mtd.name = name;
+ } else if ((offset <= 0) && mtd->split) {
+ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
+
+ /* mark existing partition as removed */
+ part = PART(mtd->split);
+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
+ strcpy(name, ROOTFS_REMOVED_NAME);
+ part->mtd.name = name;
+ part->offset = 0;
+ part->mtd.size = 0;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
+
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
@@ -666,6 +817,9 @@ int add_mtd_partitions(struct mtd_info *
struct mtd_part *slave;
uint64_t cur_offset = 0;
int i;
+#ifdef CONFIG_MTD_ROOTFS_SPLIT
+ int ret;
+#endif
printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
@@ -680,12 +834,53 @@ int add_mtd_partitions(struct mtd_info *
add_mtd_device(&slave->mtd);
+ if (!strcmp(parts[i].name, "rootfs")) {
+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
+ if (ROOT_DEV == 0) {
+ printk(KERN_NOTICE "mtd: partition \"rootfs\" "
+ "set to be root filesystem\n");
+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
+ }
+#endif
+#ifdef CONFIG_MTD_ROOTFS_SPLIT
+ ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
+ /* if (ret == 0)
+ * j++; */
+#endif
+ }
+
cur_offset = slave->offset + slave->mtd.size;
}
return 0;
}
+int mtd_device_refresh(struct mtd_info *mtd)
+{
+ int ret = 0;
+
+ if (IS_PART(mtd)) {
+ struct mtd_part *part;
+ struct mtd_info *master;
+
+ part = PART(mtd);
+ master = part->master;
+ if (master->refresh_device)
+ ret = master->refresh_device(master);
+ }
+
+ if (!ret && mtd->refresh_device)
+ ret = mtd->refresh_device(mtd);
+
+#ifdef CONFIG_MTD_ROOTFS_SPLIT
+ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
+ refresh_rootfs_split(mtd);
+#endif
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtd_device_refresh);
+
static DEFINE_SPINLOCK(part_parser_lock);
static LIST_HEAD(part_parsers);
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1026,6 +1026,12 @@ static int mtd_ioctl(struct file *file,
break;
}
+ case MTDREFRESH:
+ {
+ ret = mtd_device_refresh(mtd);
+ break;
+ }
+
default:
ret = -ENOTTY;
}
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -114,6 +114,7 @@ struct nand_ecclayout {
struct module; /* only needed for owner field in mtd_info */
+struct mtd_info;
struct mtd_info {
u_char type;
uint32_t flags;
@@ -266,6 +267,9 @@ struct mtd_info {
struct device dev;
int usecount;
+ int (*refresh_device)(struct mtd_info *mtd);
+ struct mtd_info *split;
+
/* If the driver is something smart, like UBI, it may need to maintain
* its own reference counting. The below functions are only for driver.
* The driver may register its callbacks. These callbacks are not
@@ -321,6 +325,7 @@ extern int mtd_device_parse_register(str
int defnr_parts);
#define mtd_device_register(master, parts, nr_parts) \
mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
+extern int mtd_device_refresh(struct mtd_info *master);
extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -36,12 +36,14 @@
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
*/
+struct mtd_partition;
struct mtd_partition {
char *name; /* identifier string */
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
+ int (*refresh_partition)(struct mtd_info *);
};
#define MTDPART_OFS_RETAIN (-3)
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -201,6 +201,7 @@ struct otp_info {
* modes (see "struct mtd_write_req")
*/
#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
+#define MTDREFRESH _IO('M', 50)
/*
* Obsolete legacy interface. Keep it in order not to break userspace

View file

@ -1,145 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -35,6 +35,8 @@
#include "mtdcore.h"
+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */
+
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
static DEFINE_MUTEX(mtd_partitions_mutex);
@@ -258,13 +260,60 @@ static int part_erase(struct mtd_info *m
return -EROFS;
if (instr->addr >= mtd->size)
return -EINVAL;
+
+ instr->partial_start = false;
+ if (mtd->flags & MTD_ERASE_PARTIAL) {
+ size_t readlen = 0;
+ u64 mtd_ofs;
+
+ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
+ if (!instr->erase_buf)
+ return -ENOMEM;
+
+ mtd_ofs = part->offset + instr->addr;
+ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
+
+ if (instr->erase_buf_ofs > 0) {
+ instr->addr -= instr->erase_buf_ofs;
+ ret = part->master->read(part->master,
+ instr->addr + part->offset,
+ part->master->erasesize,
+ &readlen, instr->erase_buf);
+
+ instr->partial_start = true;
+ } else {
+ mtd_ofs = part->offset + part->mtd.size;
+ instr->erase_buf_ofs = part->master->erasesize -
+ do_div(mtd_ofs, part->master->erasesize);
+
+ if (instr->erase_buf_ofs > 0) {
+ instr->len += instr->erase_buf_ofs;
+ ret = part->master->read(part->master,
+ part->offset + instr->addr +
+ instr->len - part->master->erasesize,
+ part->master->erasesize, &readlen,
+ instr->erase_buf);
+ } else {
+ ret = 0;
+ }
+ }
+ if (ret < 0) {
+ kfree(instr->erase_buf);
+ return ret;
+ }
+
+ }
+
instr->addr += part->offset;
ret = part->master->erase(part->master, instr);
if (ret) {
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
instr->addr -= part->offset;
+ if (mtd->flags & MTD_ERASE_PARTIAL)
+ kfree(instr->erase_buf);
}
+
return ret;
}
@@ -272,7 +321,25 @@ void mtd_erase_callback(struct erase_inf
{
if (instr->mtd->erase == part_erase) {
struct mtd_part *part = PART(instr->mtd);
+ size_t wrlen = 0;
+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
+ if (instr->partial_start) {
+ part->master->write(part->master,
+ instr->addr, instr->erase_buf_ofs,
+ &wrlen, instr->erase_buf);
+ instr->addr += instr->erase_buf_ofs;
+ } else {
+ instr->len -= instr->erase_buf_ofs;
+ part->master->write(part->master,
+ instr->addr + instr->len,
+ instr->erase_buf_ofs, &wrlen,
+ instr->erase_buf +
+ part->master->erasesize -
+ instr->erase_buf_ofs);
+ }
+ kfree(instr->erase_buf);
+ }
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
instr->addr -= part->offset;
@@ -543,18 +610,24 @@ static struct mtd_part *allocate_partiti
if ((slave->mtd.flags & MTD_WRITEABLE) &&
mtd_mod_by_eb(slave->offset, &slave->mtd)) {
/* Doesn't start on a boundary of major erase size */
- /* FIXME: Let it be writable if it is on a boundary of
- * _minor_ erase size though */
- slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
- part->name);
+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
+ if (((u32) slave->mtd.size) > master->erasesize)
+ slave->mtd.flags &= ~MTD_WRITEABLE;
+ else
+ slave->mtd.erasesize = slave->mtd.size;
}
if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
- slave->mtd.flags &= ~MTD_WRITEABLE;
- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
- part->name);
+ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
+
+ if ((u32) slave->mtd.size > master->erasesize)
+ slave->mtd.flags &= ~MTD_WRITEABLE;
+ else
+ slave->mtd.erasesize = slave->mtd.size;
}
+ if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
+ printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
+ part->name);
slave->mtd.ecclayout = master->ecclayout;
if (master->block_isbad) {
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -58,6 +58,10 @@ struct erase_info {
u_long priv;
u_char state;
struct erase_info *next;
+
+ u8 *erase_buf;
+ u32 erase_buf_ofs;
+ bool partial_start;
};
struct mtd_erase_region_info {

View file

@ -1,18 +0,0 @@
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -35,6 +35,7 @@
* Note: writeable partitions require their size and offset be
* erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
*/
+struct mtd_info;
struct mtd_partition;
struct mtd_partition {
@@ -52,7 +53,6 @@ struct mtd_partition {
#define MTDPART_SIZ_FULL (0)
-struct mtd_info;
struct device_node;
/**

View file

@ -1,30 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -267,14 +267,21 @@ static int parse_redboot_partitions(stru
#endif
names += strlen(names)+1;
-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
- i++;
- parts[i].offset = parts[i-1].size + parts[i-1].offset;
- parts[i].size = fl->next->img->flash_base - parts[i].offset;
- parts[i].name = nullname;
- }
+ if (!strcmp(parts[i].name, "rootfs")) {
+ parts[i].size = fl->next->img->flash_base;
+ parts[i].size &= ~(master->erasesize - 1);
+ parts[i].size -= parts[i].offset;
+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ nrparts--;
+ } else {
+ i++;
+ parts[i].offset = parts[i-1].size + parts[i-1].offset;
+ parts[i].size = fl->next->img->flash_base - parts[i].offset;
+ parts[i].name = nullname;
#endif
+ }
+ }
tmp_fl = fl;
fl = fl->next;
kfree(tmp_fl);

View file

@ -1,60 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -30,6 +30,8 @@
#include <linux/mtd/partitions.h>
#include <linux/module.h>
+#define BOARD_CONFIG_PART "boardconfig"
+
struct fis_image_desc {
unsigned char name[16]; // Null terminated name
uint32_t flash_base; // Address within FLASH of image
@@ -60,6 +62,7 @@ static int parse_redboot_partitions(stru
struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
+ unsigned long max_offset = 0;
int nrparts = 0;
struct fis_image_desc *buf;
struct mtd_partition *parts;
@@ -227,14 +230,14 @@ static int parse_redboot_partitions(stru
}
}
#endif
- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
+ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
if (!parts) {
ret = -ENOMEM;
goto out;
}
- nullname = (char *)&parts[nrparts];
+ nullname = (char *)&parts[nrparts + 1];
#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
if (nulllen > 0) {
strcpy(nullname, nullstring);
@@ -253,6 +256,8 @@ static int parse_redboot_partitions(stru
}
#endif
for ( ; i<nrparts; i++) {
+ if(max_offset < buf[i].flash_base + buf[i].size)
+ max_offset = buf[i].flash_base + buf[i].size;
parts[i].size = fl->img->size;
parts[i].offset = fl->img->flash_base;
parts[i].name = names;
@@ -286,6 +291,14 @@ static int parse_redboot_partitions(stru
fl = fl->next;
kfree(tmp_fl);
}
+ if(master->size - max_offset >= master->erasesize)
+ {
+ parts[nrparts].size = master->size - max_offset;
+ parts[nrparts].offset = max_offset;
+ parts[nrparts].name = names;
+ strcpy(names, BOARD_CONFIG_PART);
+ nrparts++;
+ }
ret = nrparts;
*pparts = parts;
out:

View file

@ -1,35 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -148,6 +148,22 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

View file

@ -1,116 +0,0 @@
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -14,6 +14,7 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/mount.h>
@@ -232,11 +233,12 @@ static void block2mtd_free_device(struct
/* FIXME: ensure that mtd->size % erase_size == 0 */
-static struct block2mtd_dev *add_device(char *devname, int erase_size)
+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
{
const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
struct block_device *bdev;
struct block2mtd_dev *dev;
+ struct mtd_partition *part;
char *name;
if (!devname)
@@ -275,13 +277,16 @@ static struct block2mtd_dev *add_device(
/* Setup the MTD structure */
/* make the name contain the block device in */
- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
+ if (!mtdname)
+ mtdname = devname;
+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
if (!name)
goto devinit_err;
+ strcpy(name, mtdname);
dev->mtd.name = name;
- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
dev->mtd.erasesize = erase_size;
dev->mtd.writesize = 1;
dev->mtd.writebufsize = PAGE_SIZE;
@@ -295,14 +300,17 @@ static struct block2mtd_dev *add_device(
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
- if (mtd_device_register(&dev->mtd, NULL, 0)) {
+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ part->name = name;
+ part->offset = 0;
+ part->size = dev->mtd.size;
+ if (mtd_device_register(&dev->mtd, part, 1)) {
/* Device didn't get added, so free the entry */
goto devinit_err;
}
list_add(&dev->list, &blkmtd_device_list);
INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
- dev->mtd.name + strlen("block2mtd: "),
- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
return dev;
devinit_err:
@@ -375,9 +383,9 @@ static char block2mtd_paramline[80 + 12]
static int block2mtd_setup2(const char *val)
{
- char buf[80 + 12]; /* 80 for device, 12 for erase size */
+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
char *str = buf;
- char *token[2];
+ char *token[3];
char *name;
size_t erase_size = PAGE_SIZE;
int i, ret;
@@ -388,7 +396,7 @@ static int block2mtd_setup2(const char *
strcpy(str, val);
kill_final_newline(str);
- for (i = 0; i < 2; i++)
+ for (i = 0; i < 3; i++)
token[i] = strsep(&str, ",");
if (str)
@@ -407,8 +415,10 @@ static int block2mtd_setup2(const char *
parse_err("illegal erase size");
}
}
+ if (token[2] && (strlen(token[2]) + 1 > 80))
+ parse_err("mtd device name too long");
- add_device(name, erase_size);
+ add_device(name, erase_size, token[2]);
return 0;
}
@@ -442,7 +452,7 @@ static int block2mtd_setup(const char *v
module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
static int __init block2mtd_init(void)
{
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -696,6 +696,7 @@ int invalidate_partitions(struct gendisk
return 0;
}
+EXPORT_SYMBOL(rescan_partitions);
unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
{

View file

@ -1,291 +0,0 @@
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -30,6 +30,8 @@ struct block2mtd_dev {
struct block_device *blkdev;
struct mtd_info mtd;
struct mutex write_mutex;
+ rwlock_t bdev_mutex;
+ char devname[0];
};
@@ -82,6 +84,12 @@ static int block2mtd_erase(struct mtd_in
size_t len = instr->len;
int err;
+ read_lock(&dev->bdev_mutex);
+ if (!dev->blkdev) {
+ err = -EINVAL;
+ goto done;
+ }
+
instr->state = MTD_ERASING;
mutex_lock(&dev->write_mutex);
err = _block2mtd_erase(dev, from, len);
@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
instr->state = MTD_ERASE_DONE;
mtd_erase_callback(instr);
+
+done:
+ read_unlock(&dev->bdev_mutex);
+
return err;
}
@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
struct page *page;
int index = from >> PAGE_SHIFT;
int offset = from & (PAGE_SIZE-1);
- int cpylen;
+ int cpylen, err = 0;
+
+ read_lock(&dev->bdev_mutex);
+ if (!dev->blkdev || (from > mtd->size)) {
+ err = -EINVAL;
+ goto done;
+ }
- if (from > mtd->size)
- return -EINVAL;
if (from + len > mtd->size)
len = mtd->size - from;
@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
len = len - cpylen;
page = page_read(dev->blkdev->bd_inode->i_mapping, index);
- if (!page)
- return -ENOMEM;
- if (IS_ERR(page))
- return PTR_ERR(page);
+ if (!page) {
+ err = -ENOMEM;
+ goto done;
+ }
+ if (IS_ERR(page)) {
+ err = PTR_ERR(page);
+ goto done;
+ }
memcpy(buf, page_address(page) + offset, cpylen);
page_cache_release(page);
@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
offset = 0;
index++;
}
- return 0;
+
+done:
+ read_unlock(&dev->bdev_mutex);
+ return err;
}
@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
size_t *retlen, const u_char *buf)
{
struct block2mtd_dev *dev = mtd->priv;
- int err;
+ int err = 0;
+
+ read_lock(&dev->bdev_mutex);
+ if (!dev->blkdev) {
+ err = -EINVAL;
+ goto done;
+ }
if (!len)
- return 0;
- if (to >= mtd->size)
- return -ENOSPC;
+ goto done;
+
+ if (to >= mtd->size) {
+ err = -ENOSPC;
+ goto done;
+ }
+
if (to + len > mtd->size)
len = mtd->size - to;
@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
mutex_unlock(&dev->write_mutex);
if (err > 0)
err = 0;
+
+done:
+ read_unlock(&dev->bdev_mutex);
return err;
}
@@ -210,33 +246,110 @@ static int block2mtd_write(struct mtd_in
static void block2mtd_sync(struct mtd_info *mtd)
{
struct block2mtd_dev *dev = mtd->priv;
+ read_lock(&dev->bdev_mutex);
+ if (dev->blkdev)
sync_blockdev(dev->blkdev);
+ read_unlock(&dev->bdev_mutex);
+
return;
}
+static int _open_bdev(struct block2mtd_dev *dev)
+{
+ const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ struct block_device *bdev;
+
+ /* Get a handle on the device */
+ bdev = blkdev_get_by_path(dev->devname, mode, dev);
+#ifndef MODULE
+ if (IS_ERR(bdev)) {
+ dev_t devt;
+
+ /* We might not have rootfs mounted at this point. Try
+ to resolve the device name by other means. */
+
+ devt = name_to_dev_t(dev->devname);
+ if (devt)
+ bdev = blkdev_get_by_dev(devt, mode, dev);
+ }
+#endif
+
+ if (IS_ERR(bdev)) {
+ ERROR("error: cannot open device %s", dev->devname);
+ return 1;
+ }
+ dev->blkdev = bdev;
+
+ if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ ERROR("attempting to use an MTD device as a block device");
+ return 1;
+ }
+
+ return 0;
+}
+
+static void _close_bdev(struct block2mtd_dev *dev)
+{
+ struct block_device *bdev;
+
+ if (!dev->blkdev)
+ return;
+
+ bdev = dev->blkdev;
+ invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
+ blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
+ dev->blkdev = NULL;
+}
+
static void block2mtd_free_device(struct block2mtd_dev *dev)
{
if (!dev)
return;
kfree(dev->mtd.name);
-
- if (dev->blkdev) {
- invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
- 0, -1);
- blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
- }
-
+ _close_bdev(dev);
kfree(dev);
}
-/* FIXME: ensure that mtd->size % erase_size == 0 */
-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+static int block2mtd_refresh(struct mtd_info *mtd)
{
- const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ struct block2mtd_dev *dev = mtd->priv;
struct block_device *bdev;
+ dev_t devt;
+ int err = 0;
+
+ /* no other mtd function can run at this point */
+ write_lock(&dev->bdev_mutex);
+
+ /* get the device number for the whole disk */
+ devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
+
+ /* close the old block device */
+ _close_bdev(dev);
+
+ /* open the whole disk, issue a partition rescan, then */
+ bdev = blkdev_get_by_dev(devt, FMODE_WRITE | FMODE_READ, mtd);
+ if (!bdev || !bdev->bd_disk)
+ err = -EINVAL;
+#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
+ else
+ err = rescan_partitions(bdev->bd_disk, bdev);
+#endif
+ if (bdev)
+ blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
+
+ /* try to open the partition block device again */
+ _open_bdev(dev);
+ write_unlock(&dev->bdev_mutex);
+
+ return err;
+}
+
+/* FIXME: ensure that mtd->size % erase_size == 0 */
+static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
+{
struct block2mtd_dev *dev;
struct mtd_partition *part;
char *name;
@@ -244,36 +357,17 @@ static struct block2mtd_dev *add_device(
if (!devname)
return NULL;
- dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
if (!dev)
return NULL;
- /* Get a handle on the device */
- bdev = blkdev_get_by_path(devname, mode, dev);
-#ifndef MODULE
- if (IS_ERR(bdev)) {
-
- /* We might not have rootfs mounted at this point. Try
- to resolve the device name by other means. */
+ strcpy(dev->devname, devname);
- dev_t devt = name_to_dev_t(devname);
- if (devt)
- bdev = blkdev_get_by_dev(devt, mode, dev);
- }
-#endif
-
- if (IS_ERR(bdev)) {
- ERROR("error: cannot open device %s", devname);
+ if (_open_bdev(dev))
goto devinit_err;
- }
- dev->blkdev = bdev;
-
- if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
- ERROR("attempting to use an MTD device as a block device");
- goto devinit_err;
- }
mutex_init(&dev->write_mutex);
+ rwlock_init(&dev->bdev_mutex);
/* Setup the MTD structure */
/* make the name contain the block device in */
@@ -299,6 +393,7 @@ static struct block2mtd_dev *add_device(
dev->mtd.read = block2mtd_read;
dev->mtd.priv = dev;
dev->mtd.owner = THIS_MODULE;
+ dev->mtd.refresh_device = block2mtd_refresh;
part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
part->name = name;

View file

@ -1,10 +0,0 @@
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -269,6 +269,7 @@ static int _open_bdev(struct block2mtd_d
/* We might not have rootfs mounted at this point. Try
to resolve the device name by other means. */
+ wait_for_device_probe();
devt = name_to_dev_t(dev->devname);
if (devt)
bdev = blkdev_get_by_dev(devt, mode, dev);

View file

@ -1,37 +0,0 @@
---
drivers/mtd/nand/plat_nand.c | 13 ++++++++++++-
include/linux/mtd/nand.h | 1 +
2 files changed, 13 insertions(+), 1 deletion(-)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -621,6 +621,7 @@ struct platform_nand_chip {
unsigned int options;
unsigned int bbt_options;
const char **part_probe_types;
+ int (*chip_fixup)(struct mtd_info *mtd);
};
/* Keep gcc happy */
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -93,7 +93,18 @@ static int __devinit plat_nand_probe(str
}
/* Scan to find existence of the device */
- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
+ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) {
+ res = -ENXIO;
+ goto out;
+ }
+
+ if (pdata->chip.chip_fixup) {
+ res = pdata->chip.chip_fixup(&data->mtd);
+ if (res)
+ goto out;
+ }
+
+ if (nand_scan_tail(&data->mtd)) {
err = -ENXIO;
goto out;
}

View file

@ -1,12 +0,0 @@
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
return 1; /* error in ECC data; no action needed */
- printk(KERN_ERR "uncorrectable error : ");
- return -1;
+ return -EBADMSG;
}
EXPORT_SYMBOL(__nand_correct_data);

View file

@ -1,11 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -682,7 +682,7 @@ static int get_chip(struct map_info *map
return 0;
case FL_ERASING:
- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
!(mode == FL_READY || mode == FL_POINT ||
(mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
goto sleep;

View file

@ -1,39 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -45,6 +45,7 @@
#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
+#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips*/
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
@@ -625,6 +626,7 @@ struct flash_info {
u16 flags;
#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
#define M25P_NO_ERASE 0x02 /* No erase command needed */
+#define SECT_4K_PMC 0x04 /* OPCODE_BE_4K_PMC works uniformly */
};
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -686,6 +688,10 @@ static const struct spi_device_id m25p_i
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
+
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
@@ -921,6 +927,9 @@ static int __devinit m25p_probe(struct s
if (info->flags & SECT_4K) {
flash->erase_opcode = OPCODE_BE_4K;
flash->mtd.erasesize = 4096;
+ } else if (info->flags & SECT_4K_PMC) {
+ flash->erase_opcode = OPCODE_BE_4K_PMC;
+ flash->mtd.erasesize = 4096;
} else {
flash->erase_opcode = OPCODE_SE;
flash->mtd.erasesize = info->sector_size;

View file

@ -1,10 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -765,6 +765,7 @@ static const struct spi_device_id m25p_i
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1) },

View file

@ -1,12 +0,0 @@
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];
- subdev->sync(subdev);
+ if (subdev->sync)
+ subdev->sync(subdev);
}
}

View file

@ -1,18 +0,0 @@
From: George Kashperko <george@znau.edu.ua>
Issue map read after Write Buffer Load command to ensure chip is ready
to receive data.
Signed-off-by: George Kashperko <george@znau.edu.ua>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1409,6 +1409,7 @@ static int __xipram do_write_buffer(stru
/* Write Buffer Load */
map_write(map, CMD(0x25), cmd_adr);
+ (void) map_read(map, cmd_adr);
chip->state = FL_WRITING_TO_BUFFER;

View file

@ -1,41 +0,0 @@
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -102,6 +102,14 @@ config M25PXX_USE_FAST_READ
help
This option enables FAST_READ access supported by ST M25Pxx.
+config M25PXX_PREFER_SMALL_SECTOR_ERASE
+ bool "Prefer small sector erase"
+ depends on MTD_M25P80
+ default y
+ help
+ This option enables use of the small erase sectors if that is
+ supported by the flash chip.
+
config MTD_SST25L
tristate "Support SST25L (non JEDEC) SPI Flash chips"
depends on SPI_MASTER
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -84,6 +84,12 @@
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+#ifdef CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE
+#define PREFER_SMALL_SECTOR_ERASE 1
+#else
+#define PREFER_SMALL_SECTOR_ERASE 0
+#endif
+
/****************************************************************************/
struct m25p {
@@ -925,7 +931,7 @@ static int __devinit m25p_probe(struct s
flash->mtd.write = m25p80_write;
/* prefer "small sector" erase if possible */
- if (info->flags & SECT_4K) {
+ if (PREFER_SMALL_SECTOR_ERASE && (info->flags & SECT_4K)) {
flash->erase_opcode = OPCODE_BE_4K;
flash->mtd.erasesize = 4096;
} else if (info->flags & SECT_4K_PMC) {

View file

@ -1,18 +0,0 @@
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -35,6 +35,7 @@ source "fs/gfs2/Kconfig"
source "fs/ocfs2/Kconfig"
source "fs/btrfs/Kconfig"
source "fs/nilfs2/Kconfig"
+source "fs/yaffs2/Kconfig"
endif # BLOCK
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -124,3 +124,5 @@ obj-$(CONFIG_GFS2_FS) += gfs2/
obj-y += exofs/ # Multiple modules
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
+obj-$(CONFIG_YAFFS_FS) += yaffs2/
+

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -1,17 +0,0 @@
--- a/fs/yaffs2/yaffs_guts.c
+++ b/fs/yaffs2/yaffs_guts.c
@@ -1709,11 +1709,11 @@ static int yaffs_change_obj_name(yaffs_o
}
/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
- if (obj->my_dev->param.is_yaffs2)
+ // if (obj->my_dev->param.is_yaffs2)
unlinkOp = (new_dir == obj->my_dev->unlinked_dir);
- else
+ /* else
unlinkOp = (new_dir == obj->my_dev->unlinked_dir
- && obj->variant_type == YAFFS_OBJECT_TYPE_FILE);
+ && obj->variant_type == YAFFS_OBJECT_TYPE_FILE); */
deleteOp = (new_dir == obj->my_dev->del_dir);

View file

@ -1,20 +0,0 @@
--- a/fs/yaffs2/yaffs_vfs_glue.c
+++ b/fs/yaffs2/yaffs_vfs_glue.c
@@ -3036,7 +3036,7 @@ static struct super_block *yaffs_interna
YINIT_LIST_HEAD(&(yaffs_dev_to_lc(dev)->searchContexts));
param->remove_obj_fn = yaffs_remove_obj_callback;
- init_MUTEX(&(yaffs_dev_to_lc(dev)->grossLock));
+ sema_init(&(yaffs_dev_to_lc(dev)->grossLock), 1);
yaffs_gross_lock(dev);
@@ -3494,7 +3494,7 @@ static int __init init_yaffs_fs(void)
- init_MUTEX(&yaffs_context_lock);
+ sema_init((&yaffs_context_lock), 1);
/* Install the proc_fs entries */
my_proc_entry = create_proc_entry("yaffs",

View file

@ -1,147 +0,0 @@
--- a/fs/yaffs2/yaffs_vfs_glue.c
+++ b/fs/yaffs2/yaffs_vfs_glue.c
@@ -72,7 +72,7 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
#include <linux/pagemap.h>
#include <linux/mtd/mtd.h>
#include <linux/interrupt.h>
@@ -97,6 +97,8 @@
#include <asm/div64.h>
+static DEFINE_MUTEX(yaffs_mutex);
+
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
#include <linux/statfs.h>
@@ -1538,7 +1540,7 @@ static loff_t yaffs_dir_llseek(struct fi
{
long long retval;
- lock_kernel();
+ mutex_lock(&yaffs_mutex);
switch (origin){
case 2:
@@ -1555,7 +1557,7 @@ static loff_t yaffs_dir_llseek(struct fi
retval = offset;
}
- unlock_kernel();
+ mutex_unlock(&yaffs_mutex);
return retval;
}
@@ -3087,98 +3089,52 @@ static struct super_block *yaffs_interna
return sb;
}
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
int silent)
{
return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
-static int yaffs_read_super(struct file_system_type *fs,
+static struct dentry *yaffs_read_super(struct file_system_type *fs,
int flags, const char *dev_name,
- void *data, struct vfsmount *mnt)
-{
-
- return get_sb_bdev(fs, flags, dev_name, data,
- yaffs_internal_read_super_mtd, mnt);
-}
-#else
-static struct super_block *yaffs_read_super(struct file_system_type *fs,
- int flags, const char *dev_name,
- void *data)
+ void *data)
{
- return get_sb_bdev(fs, flags, dev_name, data,
+ return mount_bdev(fs, flags, dev_name, data,
yaffs_internal_read_super_mtd);
}
-#endif
static struct file_system_type yaffs_fs_type = {
.owner = THIS_MODULE,
.name = "yaffs",
- .get_sb = yaffs_read_super,
+ .mount = yaffs_read_super,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
-#else
-static struct super_block *yaffs_read_super(struct super_block *sb, void *data,
- int silent)
-{
- return yaffs_internal_read_super(1, sb, data, silent);
-}
-
-static DECLARE_FSTYPE(yaffs_fs_type, "yaffs", yaffs_read_super,
- FS_REQUIRES_DEV);
-#endif
-
#ifdef CONFIG_YAFFS_YAFFS2
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
int silent)
{
return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
-static int yaffs2_read_super(struct file_system_type *fs,
- int flags, const char *dev_name, void *data,
- struct vfsmount *mnt)
+static struct dentry *yaffs2_read_super(struct file_system_type *fs,
+ int flags, const char *dev_name,
+ void *data)
{
- return get_sb_bdev(fs, flags, dev_name, data,
- yaffs2_internal_read_super_mtd, mnt);
+ return mount_bdev(fs, flags, dev_name, data,
+ yaffs_internal_read_super_mtd);
}
-#else
-static struct super_block *yaffs2_read_super(struct file_system_type *fs,
- int flags, const char *dev_name,
- void *data)
-{
-
- return get_sb_bdev(fs, flags, dev_name, data,
- yaffs2_internal_read_super_mtd);
-}
-#endif
static struct file_system_type yaffs2_fs_type = {
.owner = THIS_MODULE,
.name = "yaffs2",
- .get_sb = yaffs2_read_super,
+ .mount = yaffs2_read_super,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
-#else
-static struct super_block *yaffs2_read_super(struct super_block *sb,
- void *data, int silent)
-{
- return yaffs_internal_read_super(2, sb, data, silent);
-}
-
-static DECLARE_FSTYPE(yaffs2_fs_type, "yaffs2", yaffs2_read_super,
- FS_REQUIRES_DEV);
-#endif
#endif /* CONFIG_YAFFS_YAFFS2 */

View file

@ -1,289 +0,0 @@
--- a/fs/yaffs2/yaffs_vfs_glue.c
+++ b/fs/yaffs2/yaffs_vfs_glue.c
@@ -220,11 +220,34 @@ static struct inode *yaffs_iget(struct s
#define yaffs_SuperToDevice(sb) ((yaffs_dev_t *)sb->u.generic_sbp)
#endif
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(3, 2, 0))
+static inline void yaffs_set_nlink(struct inode *inode, unsigned int nlink)
+{
+ set_nlink(inode, nlink);
+}
+
+static inline void yaffs_dec_link_count(struct inode *inode)
+{
+ inode_dec_link_count(inode);
+}
+#else
+static inline void yaffs_set_nlink(struct inode *inode, unsigned int nlink)
+{
+ inode->i_nlink = nlink;
+}
+
+static inline void yaffs_dec_link_count(struct inode *inode)
+{
+ inode->i_nlink--;
+ mark_inode_dirty(inode)
+}
+#endif
+
#define update_dir_time(dir) do {\
(dir)->i_ctime = (dir)->i_mtime = CURRENT_TIME; \
} while(0)
-
+
static void yaffs_put_super(struct super_block *sb);
static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
@@ -238,7 +261,10 @@ static int yaffs_file_flush(struct file
static int yaffs_file_flush(struct file *file);
#endif
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(3, 2, 0))
+static int yaffs_sync_object(struct file *file, loff_t start, loff_t end,
+ int datasync);
+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
static int yaffs_sync_object(struct file *file, int datasync);
#else
static int yaffs_sync_object(struct file *file, struct dentry *dentry,
@@ -513,7 +539,7 @@ static unsigned yaffs_gc_control_callbac
{
return yaffs_gc_control;
}
-
+
static void yaffs_gross_lock(yaffs_dev_t *dev)
{
T(YAFFS_TRACE_LOCK, (TSTR("yaffs locking %p\n"), current));
@@ -1362,7 +1388,7 @@ static void yaffs_fill_inode_from_obj(st
inode->i_size = yaffs_get_obj_length(obj);
inode->i_blocks = (inode->i_size + 511) >> 9;
- inode->i_nlink = yaffs_get_obj_link_count(obj);
+ yaffs_set_nlink(inode, yaffs_get_obj_link_count(obj));
T(YAFFS_TRACE_OS,
(TSTR("yaffs_fill_inode mode %x uid %d gid %d size %d count %d\n"),
@@ -1810,10 +1836,9 @@ static int yaffs_unlink(struct inode *di
retVal = yaffs_unlinker(obj, dentry->d_name.name);
if (retVal == YAFFS_OK) {
- dentry->d_inode->i_nlink--;
+ yaffs_dec_link_count(dentry->d_inode);
dir->i_version++;
yaffs_gross_unlock(dev);
- mark_inode_dirty(dentry->d_inode);
update_dir_time(dir);
return 0;
}
@@ -1844,7 +1869,8 @@ static int yaffs_link(struct dentry *old
obj);
if (link) {
- old_dentry->d_inode->i_nlink = yaffs_get_obj_link_count(obj);
+ yaffs_set_nlink(old_dentry->d_inode,
+ yaffs_get_obj_link_count(obj));
d_instantiate(dentry, old_dentry->d_inode);
atomic_inc(&old_dentry->d_inode->i_count);
T(YAFFS_TRACE_OS,
@@ -1894,7 +1920,10 @@ static int yaffs_symlink(struct inode *d
return -ENOMEM;
}
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(3, 2, 0))
+static int yaffs_sync_object(struct file *file, loff_t start, loff_t end,
+ int datasync)
+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 34))
static int yaffs_sync_object(struct file *file, int datasync)
#else
static int yaffs_sync_object(struct file *file, struct dentry *dentry,
@@ -1961,11 +1990,9 @@ static int yaffs_rename(struct inode *ol
yaffs_gross_unlock(dev);
if (retVal == YAFFS_OK) {
- if (target) {
- new_dentry->d_inode->i_nlink--;
- mark_inode_dirty(new_dentry->d_inode);
- }
-
+ if (target)
+ yaffs_dec_link_count(new_dentry->d_inode);
+
update_dir_time(old_dir);
if(old_dir != new_dir)
update_dir_time(new_dir);
@@ -1985,7 +2012,7 @@ static int yaffs_setattr(struct dentry *
(TSTR("yaffs_setattr of object %d\n"),
yaffs_InodeToObject(inode)->obj_id));
- /* Fail if a requested resize >= 2GB */
+ /* Fail if a requested resize >= 2GB */
if (attr->ia_valid & ATTR_SIZE &&
(attr->ia_size >> 31))
error = -EINVAL;
@@ -2216,7 +2243,7 @@ static void yaffs_flush_inodes(struct su
{
struct inode *iptr;
yaffs_obj_t *obj;
-
+
list_for_each_entry(iptr,&sb->s_inodes, i_sb_list){
obj = yaffs_InodeToObject(iptr);
if(obj){
@@ -2230,10 +2257,10 @@ static void yaffs_flush_inodes(struct su
static void yaffs_flush_super(struct super_block *sb, int do_checkpoint)
{
- yaffs_dev_t *dev = yaffs_SuperToDevice(sb);
+ yaffs_dev_t *dev = yaffs_SuperToDevice(sb);
if(!dev)
return;
-
+
yaffs_flush_inodes(sb);
yaffs_update_dirty_dirs(dev);
yaffs_flush_whole_cache(dev);
@@ -2301,7 +2328,7 @@ static int yaffs_do_sync_fs(struct super
* yaffs_bg_start() launches the background thread.
* yaffs_bg_stop() cleans up the background thread.
*
- * NB:
+ * NB:
* The thread should only run after the yaffs is initialised
* The thread should be stopped before yaffs is unmounted.
* The thread should not do any writing while the fs is in read only.
@@ -2872,7 +2899,7 @@ static struct super_block *yaffs_interna
dev = kmalloc(sizeof(yaffs_dev_t), GFP_KERNEL);
context = kmalloc(sizeof(struct yaffs_LinuxContext),GFP_KERNEL);
-
+
if(!dev || !context ){
if(dev)
kfree(dev);
@@ -2905,7 +2932,7 @@ static struct super_block *yaffs_interna
#else
sb->u.generic_sbp = dev;
#endif
-
+
dev->driver_context = mtd;
param->name = mtd->name;
@@ -3005,7 +3032,7 @@ static struct super_block *yaffs_interna
param->gc_control = yaffs_gc_control_callback;
yaffs_dev_to_lc(dev)->superBlock= sb;
-
+
#ifndef CONFIG_YAFFS_DOES_ECC
param->use_nand_ecc = 1;
@@ -3047,10 +3074,10 @@ static struct super_block *yaffs_interna
T(YAFFS_TRACE_OS,
(TSTR("yaffs_read_super: guts initialised %s\n"),
(err == YAFFS_OK) ? "OK" : "FAILED"));
-
+
if(err == YAFFS_OK)
yaffs_bg_start(dev);
-
+
if(!context->bgThread)
param->defered_dir_update = 0;
@@ -3125,7 +3152,7 @@ static struct dentry *yaffs2_read_super(
void *data)
{
return mount_bdev(fs, flags, dev_name, data,
- yaffs_internal_read_super_mtd);
+ yaffs2_internal_read_super_mtd);
}
static struct file_system_type yaffs2_fs_type = {
@@ -3223,7 +3250,7 @@ static int yaffs_proc_read(char *page,
buf += sprintf(buf,"\n");
else {
step-=2;
-
+
down(&yaffs_context_lock);
/* Locate and print the Nth entry. Order N-squared but N is small. */
@@ -3240,7 +3267,7 @@ static int yaffs_proc_read(char *page,
buf = yaffs_dump_dev_part0(buf, dev);
} else
buf = yaffs_dump_dev_part1(buf, dev);
-
+
break;
}
up(&yaffs_context_lock);
@@ -3267,7 +3294,7 @@ static int yaffs_stats_proc_read(char *p
int erasedChunks;
erasedChunks = dev->n_erased_blocks * dev->param.chunks_per_block;
-
+
buf += sprintf(buf,"%d, %d, %d, %u, %u, %u, %u\n",
n, dev->n_free_chunks, erasedChunks,
dev->bg_gcs, dev->oldest_dirty_gc_count,
--- a/fs/yaffs2/yaffs_mtdif1.c
+++ b/fs/yaffs2/yaffs_mtdif1.c
@@ -34,6 +34,7 @@
#include "linux/version.h"
#include "linux/types.h"
#include "linux/mtd/mtd.h"
+#include "mtd/mtd-abi.h"
/* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
@@ -127,7 +128,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
#endif
memset(&ops, 0, sizeof(ops));
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = (data) ? chunkBytes : 0;
ops.ooblen = YTAG1_SIZE;
ops.datbuf = (__u8 *)data;
@@ -179,7 +180,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
int deleted;
memset(&ops, 0, sizeof(ops));
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.len = (data) ? chunkBytes : 0;
ops.ooblen = YTAG1_SIZE;
ops.datbuf = data;
--- a/fs/yaffs2/yaffs_mtdif2.c
+++ b/fs/yaffs2/yaffs_mtdif2.c
@@ -21,6 +21,7 @@
#include "linux/mtd/mtd.h"
#include "linux/types.h"
#include "linux/time.h"
+#include "mtd/mtd-abi.h"
#include "yaffs_packedtags2.h"
@@ -71,7 +72,7 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
yaffs_PackTags2(&pt, tags, !dev->param.no_tags_ecc);
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = (dev->param.inband_tags) ? 0 : packed_tags_size;
ops.len = dev->param.total_bytes_per_chunk;
ops.ooboffs = 0;
@@ -136,7 +137,7 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
retval = mtd->read(mtd, addr, dev->param.total_bytes_per_chunk,
&dummy, data);
else if (tags) {
- ops.mode = MTD_OOB_AUTO;
+ ops.mode = MTD_OPS_AUTO_OOB;
ops.ooblen = packed_tags_size;
ops.len = data ? dev->data_bytes_per_chunk : packed_tags_size;
ops.ooboffs = 0;

View file

@ -1,485 +0,0 @@
--- a/include/linux/lzma/LzmaDec.h
+++ b/include/linux/lzma/LzmaDec.h
@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
UInt32 dicSize;
} CLzmaProps;
-/* LzmaProps_Decode - decodes properties
-Returns:
- SZ_OK
- SZ_ERROR_UNSUPPORTED - Unsupported properties
-*/
-
-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-
/* ---------- LZMA Decoder state ---------- */
@@ -70,8 +62,6 @@ typedef struct
#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-void LzmaDec_Init(CLzmaDec *p);
-
/* There are two types of LZMA streams:
0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
@@ -108,97 +98,6 @@ typedef enum
/* ELzmaStatus is used only as output value for function call */
-
-/* ---------- Interfaces ---------- */
-
-/* There are 3 levels of interfaces:
- 1) Dictionary Interface
- 2) Buffer Interface
- 3) One Call Interface
- You can select any of these interfaces, but don't mix functions from different
- groups for same object. */
-
-
-/* There are two variants to allocate state for Dictionary Interface:
- 1) LzmaDec_Allocate / LzmaDec_Free
- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
- You can use variant 2, if you set dictionary buffer manually.
- For Buffer Interface you must always use variant 1.
-
-LzmaDec_Allocate* can return:
- SZ_OK
- SZ_ERROR_MEM - Memory allocation error
- SZ_ERROR_UNSUPPORTED - Unsupported properties
-*/
-
-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-
-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-
-/* ---------- Dictionary Interface ---------- */
-
-/* You can use it, if you want to eliminate the overhead for data copying from
- dictionary to some other external buffer.
- You must work with CLzmaDec variables directly in this interface.
-
- STEPS:
- LzmaDec_Constr()
- LzmaDec_Allocate()
- for (each new stream)
- {
- LzmaDec_Init()
- while (it needs more decompression)
- {
- LzmaDec_DecodeToDic()
- use data from CLzmaDec::dic and update CLzmaDec::dicPos
- }
- }
- LzmaDec_Free()
-*/
-
-/* LzmaDec_DecodeToDic
-
- The decoding to internal dictionary buffer (CLzmaDec::dic).
- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-
-finishMode:
- It has meaning only if the decoding reaches output limit (dicLimit).
- LZMA_FINISH_ANY - Decode just dicLimit bytes.
- LZMA_FINISH_END - Stream must be finished after dicLimit.
-
-Returns:
- SZ_OK
- status:
- LZMA_STATUS_FINISHED_WITH_MARK
- LZMA_STATUS_NOT_FINISHED
- LZMA_STATUS_NEEDS_MORE_INPUT
- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
- SZ_ERROR_DATA - Data error
-*/
-
-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-
-/* ---------- Buffer Interface ---------- */
-
-/* It's zlib-like interface.
- See LzmaDec_DecodeToDic description for information about STEPS and return results,
- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
- to work with CLzmaDec variables manually.
-
-finishMode:
- It has meaning only if the decoding reaches output limit (*destLen).
- LZMA_FINISH_ANY - Decode just destLen bytes.
- LZMA_FINISH_END - Stream must be finished after (*destLen).
-*/
-
-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-
/* ---------- One Call Interface ---------- */
/* LzmaDecode
--- a/lib/lzma/LzmaDec.c
+++ b/lib/lzma/LzmaDec.c
@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
p->needFlush = 0;
}
-void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
{
p->needFlush = 1;
p->remainLen = 0;
@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
p->needInitState = 1;
}
-void LzmaDec_Init(CLzmaDec *p)
+static void LzmaDec_Init(CLzmaDec *p)
{
p->dicPos = 0;
LzmaDec_InitDicAndState(p, True, True);
@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
p->needInitState = 0;
}
-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
ELzmaFinishMode finishMode, ELzmaStatus *status)
{
SizeT inSize = *srcLen;
@@ -837,7 +837,7 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
}
-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+static __maybe_unused SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
{
SizeT outSize = *destLen;
SizeT inSize = *srcLen;
@@ -877,7 +877,7 @@ SRes LzmaDec_DecodeToBuf(CLzmaDec *p, By
}
}
-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
{
alloc->Free(alloc, p->probs);
p->probs = 0;
@@ -889,13 +889,13 @@ static void LzmaDec_FreeDict(CLzmaDec *p
p->dic = 0;
}
-void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+static void __maybe_unused LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
{
LzmaDec_FreeProbs(p, alloc);
LzmaDec_FreeDict(p, alloc);
}
-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
{
UInt32 dicSize;
Byte d;
@@ -935,7 +935,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
return SZ_OK;
}
-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+static SRes __maybe_unused LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
{
CLzmaProps propNew;
RINOK(LzmaProps_Decode(&propNew, props, propsSize));
@@ -944,7 +944,7 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
return SZ_OK;
}
-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+static SRes __maybe_unused LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
{
CLzmaProps propNew;
SizeT dicBufSize;
--- a/include/linux/lzma/LzmaEnc.h
+++ b/include/linux/lzma/LzmaEnc.h
@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
} CLzmaEncProps;
void LzmaEncProps_Init(CLzmaEncProps *p);
-void LzmaEncProps_Normalize(CLzmaEncProps *p);
-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-
/* ---------- CLzmaEncHandle Interface ---------- */
@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-/* ---------- One Call Interface ---------- */
-
-/* LzmaEncode
-Return code:
- SZ_OK - OK
- SZ_ERROR_MEM - Memory allocation error
- SZ_ERROR_PARAM - Incorrect paramater
- SZ_ERROR_OUTPUT_EOF - output buffer overflow
- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-*/
-
-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-
#ifdef __cplusplus
}
#endif
--- a/lib/lzma/LzmaEnc.c
+++ b/lib/lzma/LzmaEnc.c
@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
p->writeEndMark = 0;
}
-void LzmaEncProps_Normalize(CLzmaEncProps *p)
+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
{
int level = p->level;
if (level < 0) level = 5;
@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
#endif
}
-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
{
CLzmaEncProps props = *props2;
LzmaEncProps_Normalize(&props);
@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-UInt32 GetPosSlot1(UInt32 pos)
+static UInt32 GetPosSlot1(UInt32 pos)
{
UInt32 res;
BSR2_RET(pos, res);
@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-void LzmaEnc_FastPosInit(Byte *g_FastPos)
+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
{
int c = 2, slotFast;
g_FastPos[0] = 0;
@@ -339,7 +339,7 @@ typedef struct
CSaveState saveState;
} CLzmaEnc;
-void LzmaEnc_SaveState(CLzmaEncHandle pp)
+static void __maybe_unused LzmaEnc_SaveState(CLzmaEncHandle pp)
{
CLzmaEnc *p = (CLzmaEnc *)pp;
CSaveState *dest = &p->saveState;
@@ -365,7 +365,7 @@ void LzmaEnc_SaveState(CLzmaEncHandle pp
memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
}
-void LzmaEnc_RestoreState(CLzmaEncHandle pp)
+static void __maybe_unused LzmaEnc_RestoreState(CLzmaEncHandle pp)
{
CLzmaEnc *dest = (CLzmaEnc *)pp;
const CSaveState *p = &dest->saveState;
@@ -600,7 +600,7 @@ static void LitEnc_EncodeMatched(CRangeE
while (symbol < 0x10000);
}
-void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
{
UInt32 i;
for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
@@ -1676,7 +1676,7 @@ static void FillDistancesPrices(CLzmaEnc
p->matchPriceCount = 0;
}
-void LzmaEnc_Construct(CLzmaEnc *p)
+static void LzmaEnc_Construct(CLzmaEnc *p)
{
RangeEnc_Construct(&p->rc);
MatchFinder_Construct(&p->matchFinderBase);
@@ -1709,7 +1709,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
return p;
}
-void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
{
alloc->Free(alloc, p->litProbs);
alloc->Free(alloc, p->saveState.litProbs);
@@ -2074,7 +2074,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
}
-void LzmaEnc_Finish(CLzmaEncHandle pp)
+static void LzmaEnc_Finish(CLzmaEncHandle pp)
{
#ifndef _7ZIP_ST
CLzmaEnc *p = (CLzmaEnc *)pp;
@@ -2108,7 +2108,7 @@ static size_t MyWrite(void *pp, const vo
}
-UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
+static UInt32 __maybe_unused LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
{
const CLzmaEnc *p = (CLzmaEnc *)pp;
return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
@@ -2120,7 +2120,7 @@ const Byte *LzmaEnc_GetCurBuf(CLzmaEncHa
return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
}
-SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
+static SRes __maybe_unused LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
{
CLzmaEnc *p = (CLzmaEnc *)pp;
@@ -2248,7 +2248,7 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
return res;
}
-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+static __maybe_unused SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
{
--- a/include/linux/lzma/LzFind.h
+++ b/include/linux/lzma/LzFind.h
@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-int MatchFinder_NeedMove(CMatchFinder *p);
-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-void MatchFinder_MoveBlock(CMatchFinder *p);
-void MatchFinder_ReadIfRequired(CMatchFinder *p);
-
void MatchFinder_Construct(CMatchFinder *p);
/* Conditions:
@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
ISzAlloc *alloc);
void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-
-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
- UInt32 *distances, UInt32 maxLen);
/*
Conditions:
@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-void MatchFinder_Init(CMatchFinder *p);
-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-
#ifdef __cplusplus
}
#endif
--- a/lib/lzma/LzFind.c
+++ b/lib/lzma/LzFind.c
@@ -42,12 +42,12 @@ static int LzInWindow_Create(CMatchFinde
return (p->bufferBase != 0);
}
-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
{
p->posLimit -= subValue;
p->pos -= subValue;
@@ -268,7 +268,7 @@ static void MatchFinder_SetLimits(CMatch
p->posLimit = p->pos + limit;
}
-void MatchFinder_Init(CMatchFinder *p)
+static void MatchFinder_Init(CMatchFinder *p)
{
UInt32 i;
for (i = 0; i < p->hashSizeSum; i++)
@@ -287,7 +287,7 @@ static UInt32 MatchFinder_GetSubValue(CM
return (p->pos - p->historySize - 1) & kNormalizeMask;
}
-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
{
UInt32 i;
for (i = 0; i < numItems; i++)
@@ -350,7 +350,7 @@ static UInt32 * Hc_GetMatchesSpec(UInt32
}
}
-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
UInt32 *distances, UInt32 maxLen)
{
@@ -492,7 +492,7 @@ static UInt32 Bt2_MatchFinder_GetMatches
GET_MATCHES_FOOTER(offset, 1)
}
-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+static __maybe_unused UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
{
UInt32 offset;
GET_MATCHES_HEADER(3)
@@ -632,7 +632,7 @@ static UInt32 Hc4_MatchFinder_GetMatches
MOVE_POS_RET
}
-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+static __maybe_unused UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
{
UInt32 offset;
GET_MATCHES_HEADER(3)
@@ -657,7 +657,7 @@ static void Bt2_MatchFinder_Skip(CMatchF
while (--num != 0);
}
-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+static __maybe_unused void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
{
do
{
@@ -718,7 +718,7 @@ static void Hc4_MatchFinder_Skip(CMatchF
while (--num != 0);
}
-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+static __maybe_unused void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
{
do
{

View file

@ -1,132 +0,0 @@
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -112,6 +112,17 @@ static int jffs2_build_filesystem(struct
dbg_fsbuild("scanned flash completely\n");
jffs2_dbg_dump_block_lists_nolock(c);
+ if (c->flags & (1 << 7)) {
+ printk("%s(): unlocking the mtd device... ", __func__);
+ if (c->mtd->unlock)
+ c->mtd->unlock(c->mtd, 0, c->mtd->size);
+ printk("done.\n");
+
+ printk("%s(): erasing all blocks after the end marker... ", __func__);
+ jffs2_erase_pending_blocks(c, -1);
+ printk("done.\n");
+ }
+
dbg_fsbuild("pass 1 starting\n");
c->flags |= JFFS2_SB_FLAG_BUILDING;
/* Now scan the directory tree, increasing nlink according to every dirent found. */
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
return ret;
if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
return ret;
- /* Turned wasted size into dirty, since we apparently
+ /* Turned wasted size into dirty, since we apparently
think it's recoverable now. */
jeb->dirty_size += jeb->wasted_size;
c->dirty_size += jeb->wasted_size;
@@ -147,8 +147,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
/* reset summary info for next eraseblock scan */
jffs2_sum_reset_collected(s);
- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
- buf_size, s);
+ if (c->flags & (1 << 7))
+ ret = BLK_STATE_ALLFF;
+ else
+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+ buf_size, s);
if (ret < 0)
goto out;
@@ -403,7 +406,7 @@ static int jffs2_scan_xref_node(struct j
if (!ref)
return -ENOMEM;
- /* BEFORE jffs2_build_xattr_subsystem() called,
+ /* BEFORE jffs2_build_xattr_subsystem() called,
* and AFTER xattr_ref is marked as a dead xref,
* ref->xid is used to store 32bit xid, xd is not used
* ref->ino is used to store 32bit inode-number, ic is not used
@@ -476,7 +479,7 @@ static int jffs2_scan_eraseblock (struct
struct jffs2_sum_marker *sm;
void *sumptr = NULL;
uint32_t sumlen;
-
+
if (!buf_size) {
/* XIP case. Just look, point at the summary if it's there */
sm = (void *)buf + c->sector_size - sizeof(*sm);
@@ -492,9 +495,9 @@ static int jffs2_scan_eraseblock (struct
buf_len = sizeof(*sm);
/* Read as much as we want into the _end_ of the preallocated buffer */
- err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
jeb->offset + c->sector_size - buf_len,
- buf_len);
+ buf_len);
if (err)
return err;
@@ -513,9 +516,9 @@ static int jffs2_scan_eraseblock (struct
}
if (buf_len < sumlen) {
/* Need to read more so that the entire summary node is present */
- err = jffs2_fill_scan_buf(c, sumptr,
+ err = jffs2_fill_scan_buf(c, sumptr,
jeb->offset + c->sector_size - sumlen,
- sumlen - buf_len);
+ sumlen - buf_len);
if (err)
return err;
}
@@ -528,7 +531,7 @@ static int jffs2_scan_eraseblock (struct
if (buf_size && sumlen > buf_size)
kfree(sumptr);
- /* If it returns with a real error, bail.
+ /* If it returns with a real error, bail.
If it returns positive, that's a block classification
(i.e. BLK_STATE_xxx) so return that too.
If it returns zero, fall through to full scan. */
@@ -549,6 +552,17 @@ static int jffs2_scan_eraseblock (struct
return err;
}
+ if ((buf[0] == 0xde) &&
+ (buf[1] == 0xad) &&
+ (buf[2] == 0xc0) &&
+ (buf[3] == 0xde)) {
+ /* end of filesystem. erase everything after this point */
+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
+ c->flags |= (1 << 7);
+
+ return BLK_STATE_ALLFF;
+ }
+
/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
ofs = 0;
max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
@@ -674,7 +688,7 @@ scan_more:
scan_end = buf_len;
goto more_empty;
}
-
+
/* See how much more there is to read in this eraseblock... */
buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
if (!buf_len) {
@@ -910,7 +924,7 @@ scan_more:
D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
-
+
/* mark_node_obsolete can add to wasted !! */
if (jeb->wasted_size) {
jeb->dirty_size += jeb->wasted_size;

View file

@ -1,25 +0,0 @@
From f31b7c0efa255dd17a5f584022a319387f09b0d8 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Tue, 12 Apr 2011 19:55:41 +0200
Subject: [PATCH] squashfs: update xz compressor options struct.
Update the xz compressor options struct to match the squashfs userspace
one.
---
fs/squashfs/xz_wrapper.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
--- a/fs/squashfs/xz_wrapper.c
+++ b/fs/squashfs/xz_wrapper.c
@@ -39,8 +39,10 @@ struct squashfs_xz {
};
struct comp_opts {
- __le32 dictionary_size;
__le32 flags;
+ __le16 bit_opts;
+ __le16 fb;
+ __le32 dictionary_size;
};
static void *squashfs_xz_init(struct squashfs_sb_info *msblk, void *buff,

View file

@ -1,146 +0,0 @@
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -886,6 +886,13 @@ config CRYPTO_LZO
help
This is the LZO algorithm.
+config CRYPTO_XZ
+ tristate "XZ compression algorithm"
+ select CRYPTO_ALGAPI
+ select XZ_DEC
+ help
+ This is the XZ algorithm. Only decompression is supported for now.
+
comment "Random Number Generation"
config CRYPTO_ANSI_CPRNG
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o
+obj-$(CONFIG_CRYPTO_XZ) += xz.o
obj-$(CONFIG_CRYPTO_RNG2) += rng.o
obj-$(CONFIG_CRYPTO_RNG2) += krng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
--- /dev/null
+++ b/crypto/xz.c
@@ -0,0 +1,117 @@
+/*
+ * Cryptographic API.
+ *
+ * XZ decompression support.
+ *
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/xz.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/net.h>
+
+struct xz_comp_ctx {
+ struct xz_dec *decomp_state;
+ struct xz_buf decomp_buf;
+};
+
+static int crypto_xz_decomp_init(struct xz_comp_ctx *ctx)
+{
+ ctx->decomp_state = xz_dec_init(XZ_SINGLE, 0);
+ if (!ctx->decomp_state)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void crypto_xz_decomp_exit(struct xz_comp_ctx *ctx)
+{
+ xz_dec_end(ctx->decomp_state);
+}
+
+static int crypto_xz_init(struct crypto_tfm *tfm)
+{
+ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ return crypto_xz_decomp_init(ctx);
+}
+
+static void crypto_xz_exit(struct crypto_tfm *tfm)
+{
+ struct xz_comp_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ crypto_xz_decomp_exit(ctx);
+}
+
+static int crypto_xz_compress(struct crypto_tfm *tfm, const u8 *src,
+ unsigned int slen, u8 *dst, unsigned int *dlen)
+{
+ return -EOPNOTSUPP;
+}
+
+static int crypto_xz_decompress(struct crypto_tfm *tfm, const u8 *src,
+ unsigned int slen, u8 *dst, unsigned int *dlen)
+{
+ struct xz_comp_ctx *dctx = crypto_tfm_ctx(tfm);
+ struct xz_buf *xz_buf = &dctx->decomp_buf;
+ int ret;
+
+ memset(xz_buf, '\0', sizeof(struct xz_buf));
+
+ xz_buf->in = (u8 *) src;
+ xz_buf->in_pos = 0;
+ xz_buf->in_size = slen;
+ xz_buf->out = (u8 *) dst;
+ xz_buf->out_pos = 0;
+ xz_buf->out_size = *dlen;
+
+ ret = xz_dec_run(dctx->decomp_state, xz_buf);
+ if (ret != XZ_STREAM_END) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ *dlen = xz_buf->out_pos;
+ ret = 0;
+
+out:
+ return ret;
+}
+
+static struct crypto_alg crypto_xz_alg = {
+ .cra_name = "xz",
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct xz_comp_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(crypto_xz_alg.cra_list),
+ .cra_init = crypto_xz_init,
+ .cra_exit = crypto_xz_exit,
+ .cra_u = { .compress = {
+ .coa_compress = crypto_xz_compress,
+ .coa_decompress = crypto_xz_decompress } }
+};
+
+static int __init crypto_xz_mod_init(void)
+{
+ return crypto_register_alg(&crypto_xz_alg);
+}
+
+static void __exit crypto_xz_mod_exit(void)
+{
+ crypto_unregister_alg(&crypto_xz_alg);
+}
+
+module_init(crypto_xz_mod_init);
+module_exit(crypto_xz_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Crypto XZ decompression support");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");

View file

@ -1,94 +0,0 @@
--- a/fs/ubifs/Kconfig
+++ b/fs/ubifs/Kconfig
@@ -5,8 +5,10 @@ config UBIFS_FS
select CRYPTO if UBIFS_FS_ADVANCED_COMPR
select CRYPTO if UBIFS_FS_LZO
select CRYPTO if UBIFS_FS_ZLIB
+ select CRYPTO if UBIFS_FS_XZ
select CRYPTO_LZO if UBIFS_FS_LZO
select CRYPTO_DEFLATE if UBIFS_FS_ZLIB
+ select CRYPTO_XZ if UBIFS_FS_XZ
depends on MTD_UBI
help
UBIFS is a file system for flash devices which works on top of UBI.
@@ -42,6 +44,14 @@ config UBIFS_FS_ZLIB
help
Zlib compresses better than LZO but it is slower. Say 'Y' if unsure.
+config UBIFS_FS_XZ
+ bool "XZ decompression support" if UBIFS_FS_ADVANCED_COMPR
+ depends on UBIFS_FS
+ default y
+ help
+ XZ compresses better the ZLIB but it is slower.
+ Say 'Y' if unsure.
+
# Debugging-related stuff
config UBIFS_FS_DEBUG
bool "Enable debugging support"
--- a/fs/ubifs/compress.c
+++ b/fs/ubifs/compress.c
@@ -71,6 +71,24 @@ static struct ubifs_compressor zlib_comp
};
#endif
+#ifdef CONFIG_UBIFS_FS_XZ
+static DEFINE_MUTEX(xz_enc_mutex);
+static DEFINE_MUTEX(xz_dec_mutex);
+
+static struct ubifs_compressor xz_compr = {
+ .compr_type = UBIFS_COMPR_XZ,
+ .comp_mutex = &xz_enc_mutex,
+ .decomp_mutex = &xz_dec_mutex,
+ .name = "xz",
+ .capi_name = "xz",
+};
+#else
+static struct ubifs_compressor zlib_compr = {
+ .compr_type = UBIFS_COMPR_XZ,
+ .name = "xz",
+};
+#endif
+
/* All UBIFS compressors */
struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
@@ -233,9 +251,15 @@ int __init ubifs_compressors_init(void)
if (err)
goto out_lzo;
+ err = compr_init(&xz_compr);
+ if (err)
+ goto out_zlib;
+
ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr;
return 0;
+out_zlib:
+ compr_exit(&zlib_compr);
out_lzo:
compr_exit(&lzo_compr);
return err;
@@ -248,4 +272,5 @@ void ubifs_compressors_exit(void)
{
compr_exit(&lzo_compr);
compr_exit(&zlib_compr);
+ compr_exit(&xz_compr);
}
--- a/fs/ubifs/ubifs-media.h
+++ b/fs/ubifs/ubifs-media.h
@@ -332,12 +332,14 @@ enum {
* UBIFS_COMPR_NONE: no compression
* UBIFS_COMPR_LZO: LZO compression
* UBIFS_COMPR_ZLIB: ZLIB compression
+ * UBIFS_COMPR_XZ: XZ compression
* UBIFS_COMPR_TYPES_CNT: count of supported compression types
*/
enum {
UBIFS_COMPR_NONE,
UBIFS_COMPR_LZO,
UBIFS_COMPR_ZLIB,
+ UBIFS_COMPR_XZ,
UBIFS_COMPR_TYPES_CNT,
};

View file

@ -1,67 +0,0 @@
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1575,6 +1575,12 @@ const struct inode_operations ubifs_syml
.follow_link = ubifs_follow_link,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
+#ifdef CONFIG_UBIFS_FS_XATTR
+ .setxattr = ubifs_setxattr,
+ .getxattr = ubifs_getxattr,
+ .listxattr = ubifs_listxattr,
+ .removexattr = ubifs_removexattr,
+#endif
};
const struct file_operations ubifs_file_operations = {
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -553,7 +553,8 @@ int ubifs_jnl_update(struct ubifs_info *
dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu",
inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino);
- ubifs_assert(dir_ui->data_len == 0);
+ if (!xent)
+ ubifs_assert(dir_ui->data_len == 0);
ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex));
dlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
@@ -573,6 +574,13 @@ int ubifs_jnl_update(struct ubifs_info *
aligned_dlen = ALIGN(dlen, 8);
aligned_ilen = ALIGN(ilen, 8);
len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ;
+ if (xent) {
+ /*
+ * Make sure to account for dir_ui->data_len in
+ * length calculation in case there is extended attribute.
+ */
+ len += dir_ui->data_len;
+ }
dent = kmalloc(len, GFP_NOFS);
if (!dent)
return -ENOMEM;
@@ -649,7 +657,8 @@ int ubifs_jnl_update(struct ubifs_info *
ino_key_init(c, &ino_key, dir->i_ino);
ino_offs += aligned_ilen;
- err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ);
+ err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs,
+ UBIFS_INO_NODE_SZ + dir_ui->data_len);
if (err)
goto out_ro;
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -211,12 +211,12 @@ static int change_xattr(struct ubifs_inf
}
memcpy(ui->data, value, size);
inode->i_size = ui->ui_size = size;
- ui->data_len = size;
mutex_lock(&host_ui->ui_mutex);
host->i_ctime = ubifs_current_time(host);
host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
host_ui->xattr_size += CALC_XATTR_BYTES(size);
+ ui->data_len = size;
/*
* It is important to write the host inode after the xattr inode

View file

@ -1,108 +0,0 @@
--- a/include/linux/netfilter/xt_layer7.h
+++ b/include/linux/netfilter/xt_layer7.h
@@ -8,6 +8,7 @@ struct xt_layer7_info {
char protocol[MAX_PROTOCOL_LEN];
char pattern[MAX_PATTERN_LEN];
u_int8_t invert;
+ u_int8_t pkt;
};
#endif /* _XT_LAYER7_H */
--- a/net/netfilter/xt_layer7.c
+++ b/net/netfilter/xt_layer7.c
@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
}
/* add the new app data to the conntrack. Return number of bytes added. */
-static int add_data(struct nf_conn * master_conntrack,
- char * app_data, int appdatalen)
+static int add_datastr(char *target, int offset, char *app_data, int len)
{
int length = 0, i;
- int oldlength = master_conntrack->layer7.app_data_len;
-
- /* This is a fix for a race condition by Deti Fliegl. However, I'm not
- clear on whether the race condition exists or whether this really
- fixes it. I might just be being dense... Anyway, if it's not really
- a fix, all it does is waste a very small amount of time. */
- if(!master_conntrack->layer7.app_data) return 0;
+ if (!target) return 0;
/* Strip nulls. Make everything lower case (our regex lib doesn't
do case insensitivity). Add it to the end of the current data. */
- for(i = 0; i < maxdatalen-oldlength-1 &&
- i < appdatalen; i++) {
+ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
if(app_data[i] != '\0') {
/* the kernel version of tolower mungs 'upper ascii' */
- master_conntrack->layer7.app_data[length+oldlength] =
+ target[length+offset] =
isascii(app_data[i])?
tolower(app_data[i]) : app_data[i];
length++;
}
}
+ target[length+offset] = '\0';
+
+ return length;
+}
+
+/* add the new app data to the conntrack. Return number of bytes added. */
+static int add_data(struct nf_conn * master_conntrack,
+ char * app_data, int appdatalen)
+{
+ int length;
- master_conntrack->layer7.app_data[length+oldlength] = '\0';
- master_conntrack->layer7.app_data_len = length + oldlength;
+ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
+ master_conntrack->layer7.app_data_len += length;
return length;
}
@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
enum ip_conntrack_info master_ctinfo, ctinfo;
struct nf_conn *master_conntrack, *conntrack;
- unsigned char * app_data;
+ unsigned char *app_data, *tmp_data;
unsigned int pattern_result, appdatalen;
regexp * comppattern;
@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
master_conntrack = master_ct(master_conntrack);
/* if we've classified it or seen too many packets */
- if(total_acct_packets(master_conntrack) > num_packets ||
- master_conntrack->layer7.app_proto) {
+ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
+ master_conntrack->layer7.app_proto)) {
pattern_result = match_no_append(conntrack, master_conntrack,
ctinfo, master_ctinfo, info);
@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
/* the return value gets checked later, when we're ready to use it */
comppattern = compile_and_cache(info->pattern, info->protocol);
+ if (info->pkt) {
+ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
+ if(!tmp_data){
+ if (net_ratelimit())
+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
+ return info->invert;
+ }
+
+ tmp_data[0] = '\0';
+ add_datastr(tmp_data, 0, app_data, appdatalen);
+ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
+
+ kfree(tmp_data);
+ tmp_data = NULL;
+ spin_unlock_bh(&l7_lock);
+
+ return (pattern_result ^ info->invert);
+ }
+
/* On the first packet of a connection, allocate space for app data */
if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
!master_conntrack->layer7.app_data){

View file

@ -1,51 +0,0 @@
--- a/net/netfilter/xt_layer7.c
+++ b/net/netfilter/xt_layer7.c
@@ -415,7 +415,9 @@ static int layer7_write_proc(struct file
}
static bool
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+match(const struct sk_buff *skbin, struct xt_action_param *par)
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
match(const struct sk_buff *skbin, const struct xt_match_param *par)
#else
match(const struct sk_buff *skbin,
@@ -597,14 +599,19 @@ match(const struct sk_buff *skbin,
}
// load nf_conntrack_ipv4
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+static int
+#else
+static bool
+#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-static bool check(const struct xt_mtchk_param *par)
+check(const struct xt_mtchk_param *par)
{
if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", par->match->family);
#else
-static bool check(const char *tablename, const void *inf,
+check(const char *tablename, const void *inf,
const struct xt_match *match, void *matchinfo,
unsigned int hook_mask)
{
@@ -612,9 +619,15 @@ static bool check(const char *tablename,
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+ return -EINVAL;
+ }
+ return 0;
+#else
return 0;
}
return 1;
+#endif
}

View file

@ -1,61 +0,0 @@
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -830,6 +830,27 @@ config NETFILTER_XT_MATCH_IPVS
If unsure, say N.
+config NETFILTER_XT_MATCH_LAYER7
+ tristate '"layer7" match support'
+ depends on EXPERIMENTAL
+ depends on NETFILTER_XTABLES
+ depends on NETFILTER_ADVANCED
+ depends on NF_CONNTRACK
+ help
+ Say Y if you want to be able to classify connections (and their
+ packets) based on regular expression matching of their application
+ layer data. This is one way to classify applications such as
+ peer-to-peer filesharing systems that do not always use the same
+ port.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config NETFILTER_XT_MATCH_LAYER7_DEBUG
+ bool 'Layer 7 debugging output'
+ depends on NETFILTER_XT_MATCH_LAYER7
+ help
+ Say Y to get lots of debugging output.
+
config NETFILTER_XT_MATCH_LENGTH
tristate '"length" match support'
depends on NETFILTER_ADVANCED
@@ -1016,26 +1037,11 @@ config NETFILTER_XT_MATCH_STATE
To compile it as a module, choose M here. If unsure, say N.
-config NETFILTER_XT_MATCH_LAYER7
- tristate '"layer7" match support'
- depends on NETFILTER_XTABLES
- depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
- depends on NETFILTER_ADVANCED
- help
- Say Y if you want to be able to classify connections (and their
- packets) based on regular expression matching of their application
- layer data. This is one way to classify applications such as
- peer-to-peer filesharing systems that do not always use the same
- port.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config NETFILTER_XT_MATCH_LAYER7_DEBUG
- bool 'Layer 7 debugging output'
- depends on NETFILTER_XT_MATCH_LAYER7
- help
- Say Y to get lots of debugging output.
-
+ bool 'Layer 7 debugging output'
+ depends on NETFILTER_XT_MATCH_LAYER7
+ help
+ Say Y to get lots of debugging output.
config NETFILTER_XT_MATCH_STATISTIC
tristate '"statistic" match support'

View file

@ -1,118 +0,0 @@
--- a/include/linux/netfilter/nf_conntrack_sip.h
+++ b/include/linux/netfilter/nf_conntrack_sip.h
@@ -2,12 +2,15 @@
#define __NF_CONNTRACK_SIP_H__
#ifdef __KERNEL__
+#include <linux/types.h>
+
#define SIP_PORT 5060
#define SIP_TIMEOUT 3600
struct nf_ct_sip_master {
unsigned int register_cseq;
unsigned int invite_cseq;
+ __be16 forced_dport;
};
enum sip_expectation_classes {
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -73,6 +73,7 @@ static int map_addr(struct sk_buff *skb,
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned int buflen;
__be32 newaddr;
@@ -85,7 +86,8 @@ static int map_addr(struct sk_buff *skb,
} else if (ct->tuplehash[dir].tuple.dst.u3.ip == addr->ip &&
ct->tuplehash[dir].tuple.dst.u.udp.port == port) {
newaddr = ct->tuplehash[!dir].tuple.src.u3.ip;
- newport = ct->tuplehash[!dir].tuple.src.u.udp.port;
+ newport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[!dir].tuple.src.u.udp.port;
} else
return 1;
@@ -121,6 +123,7 @@ static unsigned int ip_nat_sip(struct sk
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
unsigned int coff, matchoff, matchlen;
enum sip_header_types hdr;
union nf_inet_addr addr;
@@ -229,6 +232,20 @@ next:
!map_sip_addr(skb, dataoff, dptr, datalen, SIP_HDR_TO))
return NF_DROP;
+ /* Mangle destination port for Cisco phones, then fix up checksums */
+ if (dir == IP_CT_DIR_REPLY && help->help.ct_sip_info.forced_dport) {
+ struct udphdr *uh;
+
+ if (!skb_make_writable(skb, skb->len))
+ return NF_DROP;
+
+ uh = (struct udphdr *)(skb->data + ip_hdrlen(skb));
+ uh->dest = help->help.ct_sip_info.forced_dport;
+
+ if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, 0, 0, NULL, 0))
+ return NF_DROP;
+ }
+
return NF_ACCEPT;
}
@@ -280,8 +297,10 @@ static unsigned int ip_nat_sip_expect(st
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
__be32 newip;
u_int16_t port;
+ __be16 srcport;
char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
unsigned buflen;
@@ -294,8 +313,9 @@ static unsigned int ip_nat_sip_expect(st
/* If the signalling port matches the connection's source port in the
* original direction, try to use the destination port in the opposite
* direction. */
- if (exp->tuple.dst.u.udp.port ==
- ct->tuplehash[dir].tuple.src.u.udp.port)
+ srcport = help->help.ct_sip_info.forced_dport ? :
+ ct->tuplehash[dir].tuple.src.u.udp.port;
+ if (exp->tuple.dst.u.udp.port == srcport)
port = ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port);
else
port = ntohs(exp->tuple.dst.u.udp.port);
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1363,8 +1363,25 @@ static int process_sip_request(struct sk
{
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+ struct nf_conn_help *help = nfct_help(ct);
+ enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
+ union nf_inet_addr addr;
+ __be16 port;
+
+ /* Many Cisco IP phones use a high source port for SIP requests, but
+ * listen for the response on port 5060. If we are the local
+ * router for one of these phones, save the port number from the
+ * Via: header so that nf_nat_sip can redirect the responses to
+ * the correct port.
+ */
+ if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
+ SIP_HDR_VIA_UDP, NULL, &matchoff,
+ &matchlen, &addr, &port) > 0 &&
+ port != ct->tuplehash[dir].tuple.src.u.udp.port &&
+ nf_inet_addr_cmp(&addr, &ct->tuplehash[dir].tuple.src.u3))
+ help->help.ct_sip_info.forced_dport = port;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
const struct sip_handler *handler;

View file

@ -1,93 +0,0 @@
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -93,6 +93,7 @@ struct ipt_ip {
#define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
#define IPT_F_GOTO 0x02 /* Set if jump is a goto */
#define IPT_F_MASK 0x03 /* All possible flag bits mask. */
+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
/* Values for "inv" field in struct ipt_ip. */
#define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -81,6 +81,9 @@ ip_packet_match(const struct iphdr *ip,
#define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
+ return true;
+
if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
IPT_INV_SRCIP) ||
FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
@@ -134,6 +137,29 @@ ip_packet_match(const struct iphdr *ip,
return true;
}
+static void
+ip_checkdefault(struct ipt_ip *ip)
+{
+ static const char iface_mask[IFNAMSIZ] = {};
+
+ if (ip->invflags || ip->flags & IPT_F_FRAG)
+ return;
+
+ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
+ return;
+
+ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
+ return;
+
+ if (ip->smsk.s_addr || ip->dmsk.s_addr)
+ return;
+
+ if (ip->proto)
+ return;
+
+ ip->flags |= IPT_F_NO_DEF_MATCH;
+}
+
static bool
ip_checkentry(const struct ipt_ip *ip)
{
@@ -561,7 +587,7 @@ static void cleanup_match(struct xt_entr
}
static int
-check_entry(const struct ipt_entry *e, const char *name)
+check_entry(struct ipt_entry *e, const char *name)
{
const struct xt_entry_target *t;
@@ -570,6 +596,8 @@ check_entry(const struct ipt_entry *e, c
return -EINVAL;
}
+ ip_checkdefault(&e->ip);
+
if (e->target_offset + sizeof(struct xt_entry_target) >
e->next_offset)
return -EINVAL;
@@ -931,6 +959,7 @@ copy_entries_to_user(unsigned int total_
const struct xt_table_info *private = table->private;
int ret = 0;
const void *loc_cpu_entry;
+ u8 flags;
counters = alloc_counters(table);
if (IS_ERR(counters))
@@ -961,6 +990,14 @@ copy_entries_to_user(unsigned int total_
ret = -EFAULT;
goto free_counters;
}
+
+ flags = e->ip.flags & IPT_F_MASK;
+ if (copy_to_user(userptr + off
+ + offsetof(struct ipt_entry, ip.flags),
+ &flags, sizeof(flags)) != 0) {
+ ret = -EFAULT;
+ goto free_counters;
+ }
for (i = sizeof(struct ipt_entry);
i < e->target_offset;

View file

@ -1,81 +0,0 @@
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -310,6 +310,33 @@ struct ipt_entry *ipt_next_entry(const s
return (void *)entry + entry->next_offset;
}
+static bool
+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
+{
+ struct xt_entry_target *t;
+ struct xt_standard_target *st;
+
+ if (e->target_offset != sizeof(struct ipt_entry))
+ return false;
+
+ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
+ return false;
+
+ t = ipt_get_target(e);
+ if (t->u.kernel.target->target)
+ return false;
+
+ st = (struct xt_standard_target *) t;
+ if (st->verdict == XT_RETURN)
+ return false;
+
+ if (st->verdict >= 0)
+ return false;
+
+ *verdict = (unsigned)(-st->verdict) - 1;
+ return true;
+}
+
/* Returns one of the generic firewall policies, like NF_ACCEPT. */
unsigned int
ipt_do_table(struct sk_buff *skb,
@@ -334,6 +361,25 @@ ipt_do_table(struct sk_buff *skb,
ip = ip_hdr(skb);
indev = in ? in->name : nulldevname;
outdev = out ? out->name : nulldevname;
+
+ IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+ local_bh_disable();
+ addend = xt_write_recseq_begin();
+ private = table->private;
+ cpu = smp_processor_id();
+ table_base = private->entries[cpu];
+ jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
+ stackptr = per_cpu_ptr(private->stackptr, cpu);
+ origptr = *stackptr;
+
+ e = get_entry(table_base, private->hook_entry[hook]);
+ if (ipt_handle_default_rule(e, &verdict)) {
+ ADD_COUNTER(e->counters, skb->len, 1);
+ xt_write_recseq_end(addend);
+ local_bh_enable();
+ return verdict;
+ }
+
/* We handle fragments by dealing with the first fragment as
* if it was a normal packet. All other fragments are treated
* normally, except that they will NEVER match rules that ask
@@ -348,18 +394,6 @@ ipt_do_table(struct sk_buff *skb,
acpar.family = NFPROTO_IPV4;
acpar.hooknum = hook;
- IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- local_bh_disable();
- addend = xt_write_recseq_begin();
- private = table->private;
- cpu = smp_processor_id();
- table_base = private->entries[cpu];
- jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
- stackptr = per_cpu_ptr(private->stackptr, cpu);
- origptr = *stackptr;
-
- e = get_entry(table_base, private->hook_entry[hook]);
-
pr_debug("Entering %s(hook %u); sp at %u (UF %p)\n",
table->name, hook, origptr,
get_entry(table_base, private->underflow[hook]));

View file

@ -1,16 +0,0 @@
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -84,9 +84,11 @@ ip_packet_match(const struct iphdr *ip,
if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
return true;
- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ if (FWINV(ipinfo->smsk.s_addr &&
+ (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
IPT_INV_SRCIP) ||
- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+ FWINV(ipinfo->dmsk.s_addr &&
+ (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
IPT_INV_DSTIP)) {
dprintf("Source or dest mismatch.\n");

View file

@ -1,36 +0,0 @@
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -29,6 +29,9 @@
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+/* Do not check the TCP window for incoming packets */
+static int nf_ct_tcp_no_window_check __read_mostly = 1;
+
/* "Be conservative in what you do,
be liberal in what you accept from others."
If it's non-zero, we mark only out of window RST segments as INVALID. */
@@ -524,6 +527,9 @@ static bool tcp_in_window(const struct n
s16 receiver_offset;
bool res;
+ if (nf_ct_tcp_no_window_check)
+ return true;
+
/*
* Get the required data from the packet.
*/
@@ -1321,6 +1327,13 @@ static struct ctl_table tcp_sysctl_table
.proc_handler = proc_dointvec,
},
{
+ .procname = "nf_conntrack_tcp_no_window_check",
+ .data = &nf_ct_tcp_no_window_check,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
+ {
.procname = "nf_conntrack_tcp_be_liberal",
.data = &nf_ct_tcp_be_liberal,
.maxlen = sizeof(unsigned int),

View file

@ -1,795 +0,0 @@
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
*
* The only reason for this is efficiency, it is possible
* to change these parameters in compile time.
+ *
+ * If you need to play with these values, use esfq instead.
*/
+/* ESFQ section */
+
+enum
+{
+ /* traditional */
+ TCA_SFQ_HASH_CLASSIC,
+ TCA_SFQ_HASH_DST,
+ TCA_SFQ_HASH_SRC,
+ TCA_SFQ_HASH_FWMARK,
+ /* conntrack */
+ TCA_SFQ_HASH_CTORIGDST,
+ TCA_SFQ_HASH_CTORIGSRC,
+ TCA_SFQ_HASH_CTREPLDST,
+ TCA_SFQ_HASH_CTREPLSRC,
+ TCA_SFQ_HASH_CTNATCHG,
+};
+
+struct tc_esfq_qopt
+{
+ unsigned quantum; /* Bytes per round allocated to flow */
+ int perturb_period; /* Period of hash perturbation */
+ __u32 limit; /* Maximal packets in queue */
+ unsigned divisor; /* Hash divisor */
+ unsigned flows; /* Maximal number of flows */
+ unsigned hash_kind; /* Hash function to use for flow identification */
+};
+
/* RED section */
enum {
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -148,6 +148,37 @@ config NET_SCH_SFQ
To compile this code as a module, choose M here: the
module will be called sch_sfq.
+config NET_SCH_ESFQ
+ tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
+ ---help---
+ Say Y here if you want to use the Enhanced Stochastic Fairness
+ Queueing (ESFQ) packet scheduling algorithm for some of your network
+ devices or as a leaf discipline for a classful qdisc such as HTB or
+ CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
+ references to the SFQ algorithm).
+
+ This is an enchanced SFQ version which allows you to control some
+ hardcoded values in the SFQ scheduler.
+
+ ESFQ also adds control of the hash function used to identify packet
+ flows. The original SFQ discipline hashes by connection; ESFQ add
+ several other hashing methods, such as by src IP or by dst IP, which
+ can be more fair to users in some networking situations.
+
+ To compile this code as a module, choose M here: the
+ module will be called sch_esfq.
+
+config NET_SCH_ESFQ_NFCT
+ bool "Connection Tracking Hash Types"
+ depends on NET_SCH_ESFQ && NF_CONNTRACK
+ ---help---
+ Say Y here to enable support for hashing based on netfilter connection
+ tracking information. This is useful for a router that is also using
+ NAT to connect privately-addressed hosts to the Internet. If you want
+ to provide fair distribution of upstream bandwidth, ESFQ must use
+ connection tracking information, since all outgoing packets will share
+ the same source address.
+
config NET_SCH_TEQL
tristate "True Link Equalizer (TEQL)"
---help---
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_NET_SCH_INGRESS) += sch_ing
obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o
obj-$(CONFIG_NET_SCH_SFB) += sch_sfb.o
obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o
+obj-$(CONFIG_NET_SCH_ESFQ) += sch_esfq.o
obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o
obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o
obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o
--- /dev/null
+++ b/net/sched/sch_esfq.c
@@ -0,0 +1,702 @@
+/*
+ * net/sched/sch_esfq.c Extended Stochastic Fairness Queueing discipline.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
+ *
+ * Changes: Alexander Atanasov, <alex@ssi.bg>
+ * Added dynamic depth,limit,divisor,hash_kind options.
+ * Added dst and src hashes.
+ *
+ * Alexander Clouter, <alex@digriz.org.uk>
+ * Ported ESFQ to Linux 2.6.
+ *
+ * Corey Hickey, <bugfood-c@fatooh.org>
+ * Maintenance of the Linux 2.6 port.
+ * Added fwmark hash (thanks to Robert Kurjata).
+ * Added usage of jhash.
+ * Added conntrack support.
+ * Added ctnatchg hash (thanks to Ben Pfountz).
+ */
+
+#include <linux/module.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/in.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/inet.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/notifier.h>
+#include <linux/init.h>
+#include <net/ip.h>
+#include <net/netlink.h>
+#include <linux/ipv6.h>
+#include <net/route.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/pkt_sched.h>
+#include <linux/jhash.h>
+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
+#include <net/netfilter/nf_conntrack.h>
+#endif
+
+/* Stochastic Fairness Queuing algorithm.
+ For more comments look at sch_sfq.c.
+ The difference is that you can change limit, depth,
+ hash table size and choose alternate hash types.
+
+ classic: same as in sch_sfq.c
+ dst: destination IP address
+ src: source IP address
+ fwmark: netfilter mark value
+ ctorigdst: original destination IP address
+ ctorigsrc: original source IP address
+ ctrepldst: reply destination IP address
+ ctreplsrc: reply source IP
+
+*/
+
+#define ESFQ_HEAD 0
+#define ESFQ_TAIL 1
+
+/* This type should contain at least SFQ_DEPTH*2 values */
+typedef unsigned int esfq_index;
+
+struct esfq_head
+{
+ esfq_index next;
+ esfq_index prev;
+};
+
+struct esfq_sched_data
+{
+/* Parameters */
+ int perturb_period;
+ unsigned quantum; /* Allotment per round: MUST BE >= MTU */
+ int limit;
+ unsigned depth;
+ unsigned hash_divisor;
+ unsigned hash_kind;
+/* Variables */
+ struct timer_list perturb_timer;
+ int perturbation;
+ esfq_index tail; /* Index of current slot in round */
+ esfq_index max_depth; /* Maximal depth */
+
+ esfq_index *ht; /* Hash table */
+ esfq_index *next; /* Active slots link */
+ short *allot; /* Current allotment per slot */
+ unsigned short *hash; /* Hash value indexed by slots */
+ struct sk_buff_head *qs; /* Slot queue */
+ struct esfq_head *dep; /* Linked list of slots, indexed by depth */
+};
+
+/* This contains the info we will hash. */
+struct esfq_packet_info
+{
+ u32 proto; /* protocol or port */
+ u32 src; /* source from packet header */
+ u32 dst; /* destination from packet header */
+ u32 ctorigsrc; /* original source from conntrack */
+ u32 ctorigdst; /* original destination from conntrack */
+ u32 ctreplsrc; /* reply source from conntrack */
+ u32 ctrepldst; /* reply destination from conntrack */
+ u32 mark; /* netfilter mark (fwmark) */
+};
+
+static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
+{
+ return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
+}
+
+static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
+{
+ return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
+}
+
+static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
+{
+ return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
+}
+
+static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
+{
+ struct esfq_packet_info info;
+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+#endif
+
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
+ {
+ struct iphdr *iph = ip_hdr(skb);
+ info.dst = iph->daddr;
+ info.src = iph->saddr;
+ if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
+ (iph->protocol == IPPROTO_TCP ||
+ iph->protocol == IPPROTO_UDP ||
+ iph->protocol == IPPROTO_SCTP ||
+ iph->protocol == IPPROTO_DCCP ||
+ iph->protocol == IPPROTO_ESP))
+ info.proto = *(((u32*)iph) + iph->ihl);
+ else
+ info.proto = iph->protocol;
+ break;
+ }
+ case __constant_htons(ETH_P_IPV6):
+ {
+ struct ipv6hdr *iph = ipv6_hdr(skb);
+ /* Hash ipv6 addresses into a u32. This isn't ideal,
+ * but the code is simple. */
+ info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
+ info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
+ if (iph->nexthdr == IPPROTO_TCP ||
+ iph->nexthdr == IPPROTO_UDP ||
+ iph->nexthdr == IPPROTO_SCTP ||
+ iph->nexthdr == IPPROTO_DCCP ||
+ iph->nexthdr == IPPROTO_ESP)
+ info.proto = *(u32*)&iph[1];
+ else
+ info.proto = iph->nexthdr;
+ break;
+ }
+ default:
+ info.dst = (u32)(unsigned long)skb_dst(skb);
+ info.src = (u32)(unsigned long)skb->sk;
+ info.proto = skb->protocol;
+ }
+
+ info.mark = skb->mark;
+
+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
+ /* defaults if there is no conntrack info */
+ info.ctorigsrc = info.src;
+ info.ctorigdst = info.dst;
+ info.ctreplsrc = info.dst;
+ info.ctrepldst = info.src;
+ /* collect conntrack info */
+ if (ct && ct != &nf_conntrack_untracked) {
+ if (skb->protocol == __constant_htons(ETH_P_IP)) {
+ info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
+ info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
+ info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
+ info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
+ }
+ else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
+ /* Again, hash ipv6 addresses into a single u32. */
+ info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
+ info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
+ info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
+ info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
+ }
+
+ }
+#endif
+
+ switch(q->hash_kind) {
+ case TCA_SFQ_HASH_CLASSIC:
+ return esfq_jhash_3words(q, info.dst, info.src, info.proto);
+ case TCA_SFQ_HASH_DST:
+ return esfq_jhash_1word(q, info.dst);
+ case TCA_SFQ_HASH_SRC:
+ return esfq_jhash_1word(q, info.src);
+ case TCA_SFQ_HASH_FWMARK:
+ return esfq_jhash_1word(q, info.mark);
+#ifdef CONFIG_NET_SCH_ESFQ_NFCT
+ case TCA_SFQ_HASH_CTORIGDST:
+ return esfq_jhash_1word(q, info.ctorigdst);
+ case TCA_SFQ_HASH_CTORIGSRC:
+ return esfq_jhash_1word(q, info.ctorigsrc);
+ case TCA_SFQ_HASH_CTREPLDST:
+ return esfq_jhash_1word(q, info.ctrepldst);
+ case TCA_SFQ_HASH_CTREPLSRC:
+ return esfq_jhash_1word(q, info.ctreplsrc);
+ case TCA_SFQ_HASH_CTNATCHG:
+ {
+ if (info.ctorigdst == info.ctreplsrc)
+ return esfq_jhash_1word(q, info.ctorigsrc);
+ return esfq_jhash_1word(q, info.ctreplsrc);
+ }
+#endif
+ default:
+ if (net_ratelimit())
+ printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
+ }
+ return esfq_jhash_3words(q, info.dst, info.src, info.proto);
+}
+
+static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
+{
+ esfq_index p, n;
+ int d = q->qs[x].qlen + q->depth;
+
+ p = d;
+ n = q->dep[d].next;
+ q->dep[x].next = n;
+ q->dep[x].prev = p;
+ q->dep[p].next = q->dep[n].prev = x;
+}
+
+static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
+{
+ esfq_index p, n;
+
+ n = q->dep[x].next;
+ p = q->dep[x].prev;
+ q->dep[p].next = n;
+ q->dep[n].prev = p;
+
+ if (n == p && q->max_depth == q->qs[x].qlen + 1)
+ q->max_depth--;
+
+ esfq_link(q, x);
+}
+
+static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
+{
+ esfq_index p, n;
+ int d;
+
+ n = q->dep[x].next;
+ p = q->dep[x].prev;
+ q->dep[p].next = n;
+ q->dep[n].prev = p;
+ d = q->qs[x].qlen;
+ if (q->max_depth < d)
+ q->max_depth = d;
+
+ esfq_link(q, x);
+}
+
+static unsigned int esfq_drop(struct Qdisc *sch)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ esfq_index d = q->max_depth;
+ struct sk_buff *skb;
+ unsigned int len;
+
+ /* Queue is full! Find the longest slot and
+ drop a packet from it */
+
+ if (d > 1) {
+ esfq_index x = q->dep[d+q->depth].next;
+ skb = q->qs[x].prev;
+ len = skb->len;
+ __skb_unlink(skb, &q->qs[x]);
+ kfree_skb(skb);
+ esfq_dec(q, x);
+ sch->q.qlen--;
+ sch->qstats.drops++;
+ sch->qstats.backlog -= len;
+ return len;
+ }
+
+ if (d == 1) {
+ /* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
+ d = q->next[q->tail];
+ q->next[q->tail] = q->next[d];
+ q->allot[q->next[d]] += q->quantum;
+ skb = q->qs[d].prev;
+ len = skb->len;
+ __skb_unlink(skb, &q->qs[d]);
+ kfree_skb(skb);
+ esfq_dec(q, d);
+ sch->q.qlen--;
+ q->ht[q->hash[d]] = q->depth;
+ sch->qstats.drops++;
+ sch->qstats.backlog -= len;
+ return len;
+ }
+
+ return 0;
+}
+
+static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
+{
+ unsigned hash = esfq_hash(q, skb);
+ unsigned depth = q->depth;
+ esfq_index x;
+
+ x = q->ht[hash];
+ if (x == depth) {
+ q->ht[hash] = x = q->dep[depth].next;
+ q->hash[x] = hash;
+ }
+
+ if (end == ESFQ_TAIL)
+ __skb_queue_tail(&q->qs[x], skb);
+ else
+ __skb_queue_head(&q->qs[x], skb);
+
+ esfq_inc(q, x);
+ if (q->qs[x].qlen == 1) { /* The flow is new */
+ if (q->tail == depth) { /* It is the first flow */
+ q->tail = x;
+ q->next[x] = x;
+ q->allot[x] = q->quantum;
+ } else {
+ q->next[x] = q->next[q->tail];
+ q->next[q->tail] = x;
+ q->tail = x;
+ }
+ }
+}
+
+static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ esfq_q_enqueue(skb, q, ESFQ_TAIL);
+ sch->qstats.backlog += skb->len;
+ if (++sch->q.qlen < q->limit-1) {
+ sch->bstats.bytes += skb->len;
+ sch->bstats.packets++;
+ return 0;
+ }
+
+ sch->qstats.drops++;
+ esfq_drop(sch);
+ return NET_XMIT_CN;
+}
+
+static struct sk_buff *esfq_peek(struct Qdisc* sch)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ esfq_index a;
+
+ /* No active slots */
+ if (q->tail == q->depth)
+ return NULL;
+
+ a = q->next[q->tail];
+ return skb_peek(&q->qs[a]);
+}
+
+static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
+{
+ struct sk_buff *skb;
+ unsigned depth = q->depth;
+ esfq_index a, old_a;
+
+ /* No active slots */
+ if (q->tail == depth)
+ return NULL;
+
+ a = old_a = q->next[q->tail];
+
+ /* Grab packet */
+ skb = __skb_dequeue(&q->qs[a]);
+ esfq_dec(q, a);
+
+ /* Is the slot empty? */
+ if (q->qs[a].qlen == 0) {
+ q->ht[q->hash[a]] = depth;
+ a = q->next[a];
+ if (a == old_a) {
+ q->tail = depth;
+ return skb;
+ }
+ q->next[q->tail] = a;
+ q->allot[a] += q->quantum;
+ } else if ((q->allot[a] -= skb->len) <= 0) {
+ q->tail = a;
+ a = q->next[a];
+ q->allot[a] += q->quantum;
+ }
+
+ return skb;
+}
+
+static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ struct sk_buff *skb;
+
+ skb = esfq_q_dequeue(q);
+ if (skb == NULL)
+ return NULL;
+ sch->q.qlen--;
+ sch->qstats.backlog -= skb->len;
+ return skb;
+}
+
+static void esfq_q_destroy(struct esfq_sched_data *q)
+{
+ del_timer(&q->perturb_timer);
+ if(q->ht)
+ kfree(q->ht);
+ if(q->dep)
+ kfree(q->dep);
+ if(q->next)
+ kfree(q->next);
+ if(q->allot)
+ kfree(q->allot);
+ if(q->hash)
+ kfree(q->hash);
+ if(q->qs)
+ kfree(q->qs);
+}
+
+static void esfq_destroy(struct Qdisc *sch)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ esfq_q_destroy(q);
+}
+
+
+static void esfq_reset(struct Qdisc* sch)
+{
+ struct sk_buff *skb;
+
+ while ((skb = esfq_dequeue(sch)) != NULL)
+ kfree_skb(skb);
+}
+
+static void esfq_perturbation(unsigned long arg)
+{
+ struct Qdisc *sch = (struct Qdisc*)arg;
+ struct esfq_sched_data *q = qdisc_priv(sch);
+
+ q->perturbation = net_random()&0x1F;
+
+ if (q->perturb_period) {
+ q->perturb_timer.expires = jiffies + q->perturb_period;
+ add_timer(&q->perturb_timer);
+ }
+}
+
+static unsigned int esfq_check_hash(unsigned int kind)
+{
+ switch (kind) {
+ case TCA_SFQ_HASH_CTORIGDST:
+ case TCA_SFQ_HASH_CTORIGSRC:
+ case TCA_SFQ_HASH_CTREPLDST:
+ case TCA_SFQ_HASH_CTREPLSRC:
+ case TCA_SFQ_HASH_CTNATCHG:
+#ifndef CONFIG_NET_SCH_ESFQ_NFCT
+ {
+ if (net_ratelimit())
+ printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
+ return TCA_SFQ_HASH_CLASSIC;
+ }
+#endif
+ case TCA_SFQ_HASH_CLASSIC:
+ case TCA_SFQ_HASH_DST:
+ case TCA_SFQ_HASH_SRC:
+ case TCA_SFQ_HASH_FWMARK:
+ return kind;
+ default:
+ {
+ if (net_ratelimit())
+ printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
+ return TCA_SFQ_HASH_CLASSIC;
+ }
+ }
+}
+
+static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
+{
+ struct tc_esfq_qopt *ctl = nla_data(opt);
+ esfq_index p = ~0U/2;
+ int i;
+
+ if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
+ return -EINVAL;
+
+ q->perturbation = 0;
+ q->hash_kind = TCA_SFQ_HASH_CLASSIC;
+ q->max_depth = 0;
+ if (opt == NULL) {
+ q->perturb_period = 0;
+ q->hash_divisor = 1024;
+ q->tail = q->limit = q->depth = 128;
+
+ } else {
+ struct tc_esfq_qopt *ctl = nla_data(opt);
+ if (ctl->quantum)
+ q->quantum = ctl->quantum;
+ q->perturb_period = ctl->perturb_period*HZ;
+ q->hash_divisor = ctl->divisor ? : 1024;
+ q->tail = q->limit = q->depth = ctl->flows ? : 128;
+
+ if ( q->depth > p - 1 )
+ return -EINVAL;
+
+ if (ctl->limit)
+ q->limit = min_t(u32, ctl->limit, q->depth);
+
+ if (ctl->hash_kind) {
+ q->hash_kind = esfq_check_hash(ctl->hash_kind);
+ }
+ }
+
+ q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
+ if (!q->ht)
+ goto err_case;
+ q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
+ if (!q->dep)
+ goto err_case;
+ q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
+ if (!q->next)
+ goto err_case;
+ q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
+ if (!q->allot)
+ goto err_case;
+ q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
+ if (!q->hash)
+ goto err_case;
+ q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
+ if (!q->qs)
+ goto err_case;
+
+ for (i=0; i< q->hash_divisor; i++)
+ q->ht[i] = q->depth;
+ for (i=0; i<q->depth; i++) {
+ skb_queue_head_init(&q->qs[i]);
+ q->dep[i+q->depth].next = i+q->depth;
+ q->dep[i+q->depth].prev = i+q->depth;
+ }
+
+ for (i=0; i<q->depth; i++)
+ esfq_link(q, i);
+ return 0;
+err_case:
+ esfq_q_destroy(q);
+ return -ENOBUFS;
+}
+
+static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ int err;
+
+ q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
+ if ((err = esfq_q_init(q, opt)))
+ return err;
+
+ init_timer(&q->perturb_timer);
+ q->perturb_timer.data = (unsigned long)sch;
+ q->perturb_timer.function = esfq_perturbation;
+ if (q->perturb_period) {
+ q->perturb_timer.expires = jiffies + q->perturb_period;
+ add_timer(&q->perturb_timer);
+ }
+
+ return 0;
+}
+
+static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ struct esfq_sched_data new;
+ struct sk_buff *skb;
+ int err;
+
+ /* set up new queue */
+ memset(&new, 0, sizeof(struct esfq_sched_data));
+ new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
+ if ((err = esfq_q_init(&new, opt)))
+ return err;
+
+ /* copy all packets from the old queue to the new queue */
+ sch_tree_lock(sch);
+ while ((skb = esfq_q_dequeue(q)) != NULL)
+ esfq_q_enqueue(skb, &new, ESFQ_TAIL);
+
+ /* clean up the old queue */
+ esfq_q_destroy(q);
+
+ /* copy elements of the new queue into the old queue */
+ q->perturb_period = new.perturb_period;
+ q->quantum = new.quantum;
+ q->limit = new.limit;
+ q->depth = new.depth;
+ q->hash_divisor = new.hash_divisor;
+ q->hash_kind = new.hash_kind;
+ q->tail = new.tail;
+ q->max_depth = new.max_depth;
+ q->ht = new.ht;
+ q->dep = new.dep;
+ q->next = new.next;
+ q->allot = new.allot;
+ q->hash = new.hash;
+ q->qs = new.qs;
+
+ /* finish up */
+ if (q->perturb_period) {
+ q->perturb_timer.expires = jiffies + q->perturb_period;
+ add_timer(&q->perturb_timer);
+ } else {
+ q->perturbation = 0;
+ }
+ sch_tree_unlock(sch);
+ return 0;
+}
+
+static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
+{
+ struct esfq_sched_data *q = qdisc_priv(sch);
+ unsigned char *b = skb_tail_pointer(skb);
+ struct tc_esfq_qopt opt;
+
+ opt.quantum = q->quantum;
+ opt.perturb_period = q->perturb_period/HZ;
+
+ opt.limit = q->limit;
+ opt.divisor = q->hash_divisor;
+ opt.flows = q->depth;
+ opt.hash_kind = q->hash_kind;
+
+ NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
+
+ return skb->len;
+
+nla_put_failure:
+ nlmsg_trim(skb, b);
+ return -1;
+}
+
+static struct Qdisc_ops esfq_qdisc_ops =
+{
+ .next = NULL,
+ .cl_ops = NULL,
+ .id = "esfq",
+ .priv_size = sizeof(struct esfq_sched_data),
+ .enqueue = esfq_enqueue,
+ .dequeue = esfq_dequeue,
+ .peek = esfq_peek,
+ .drop = esfq_drop,
+ .init = esfq_init,
+ .reset = esfq_reset,
+ .destroy = esfq_destroy,
+ .change = esfq_change,
+ .dump = esfq_dump,
+ .owner = THIS_MODULE,
+};
+
+static int __init esfq_module_init(void)
+{
+ return register_qdisc(&esfq_qdisc_ops);
+}
+static void __exit esfq_module_exit(void)
+{
+ unregister_qdisc(&esfq_qdisc_ops);
+}
+module_init(esfq_module_init)
+module_exit(esfq_module_exit)
+MODULE_LICENSE("GPL");

View file

@ -1,172 +0,0 @@
--- /dev/null
+++ b/net/sched/act_connmark.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2011 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/pkt_cls.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/netlink.h>
+#include <net/pkt_sched.h>
+#include <net/act_api.h>
+
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_core.h>
+
+#define TCA_ACT_CONNMARK 20
+
+#define CONNMARK_TAB_MASK 3
+static struct tcf_common *tcf_connmark_ht[CONNMARK_TAB_MASK + 1];
+static u32 connmark_idx_gen;
+static DEFINE_RWLOCK(connmark_lock);
+
+static struct tcf_hashinfo connmark_hash_info = {
+ .htab = tcf_connmark_ht,
+ .hmask = CONNMARK_TAB_MASK,
+ .lock = &connmark_lock,
+};
+
+static int tcf_connmark(struct sk_buff *skb, struct tc_action *a,
+ struct tcf_result *res)
+{
+ struct nf_conn *c;
+ enum ip_conntrack_info ctinfo;
+ int proto;
+ int r;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ if (skb->len < sizeof(struct iphdr))
+ goto out;
+ proto = PF_INET;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ if (skb->len < sizeof(struct ipv6hdr))
+ goto out;
+ proto = PF_INET6;
+ } else
+ goto out;
+
+ r = nf_conntrack_in(dev_net(skb->dev), proto, NF_INET_PRE_ROUTING, skb);
+ if (r != NF_ACCEPT)
+ goto out;
+
+ c = nf_ct_get(skb, &ctinfo);
+ if (!c)
+ goto out;
+
+ skb->mark = c->mark;
+ nf_conntrack_put(skb->nfct);
+ skb->nfct = NULL;
+
+out:
+ return TC_ACT_PIPE;
+}
+
+static int tcf_connmark_init(struct nlattr *nla, struct nlattr *est,
+ struct tc_action *a, int ovr, int bind)
+{
+ struct tcf_common *pc;
+
+ pc = tcf_hash_create(0, est, a, sizeof(*pc), bind,
+ &connmark_idx_gen, &connmark_hash_info);
+ if (IS_ERR(pc))
+ return PTR_ERR(pc);
+
+ tcf_hash_insert(pc, &connmark_hash_info);
+
+ return ACT_P_CREATED;
+}
+
+static inline int tcf_connmark_cleanup(struct tc_action *a, int bind)
+{
+ if (a->priv)
+ return tcf_hash_release(a->priv, bind, &connmark_hash_info);
+ return 0;
+}
+
+static inline int tcf_connmark_dump(struct sk_buff *skb, struct tc_action *a,
+ int bind, int ref)
+{
+ return skb->len;
+}
+
+static struct tc_action_ops act_connmark_ops = {
+ .kind = "connmark",
+ .hinfo = &connmark_hash_info,
+ .type = TCA_ACT_CONNMARK,
+ .capab = TCA_CAP_NONE,
+ .owner = THIS_MODULE,
+ .act = tcf_connmark,
+ .dump = tcf_connmark_dump,
+ .cleanup = tcf_connmark_cleanup,
+ .init = tcf_connmark_init,
+ .walk = tcf_generic_walker,
+};
+
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_DESCRIPTION("Connection tracking mark restoring");
+MODULE_LICENSE("GPL");
+
+static int __init connmark_init_module(void)
+{
+ return tcf_register_action(&act_connmark_ops);
+}
+
+static void __exit connmark_cleanup_module(void)
+{
+ tcf_unregister_action(&act_connmark_ops);
+}
+
+module_init(connmark_init_module);
+module_exit(connmark_cleanup_module);
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -602,6 +602,19 @@ config NET_ACT_CSUM
To compile this code as a module, choose M here: the
module will be called act_csum.
+config NET_ACT_CONNMARK
+ tristate "Connection Tracking Marking"
+ depends on NET_CLS_ACT
+ depends on NF_CONNTRACK
+ depends on NF_CONNTRACK_MARK
+ ---help---
+ Say Y here to restore the connmark from a scheduler action
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_connmark.
+
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_CLS_U32 || NET_CLS_FW
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit
obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o
obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o
obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
+obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o
obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o

View file

@ -1,132 +0,0 @@
This patch allows the user to specify desired packet types (outgoing,
broadcast, unicast, etc.) on packet sockets via setsockopt.
This can reduce the load in situations where only a limited number
of packet types are necessary
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -29,6 +29,8 @@ struct sockaddr_ll {
/* These ones are invisible by user level */
#define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */
#define PACKET_FASTROUTE 6 /* Fastrouted frame */
+#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */
+
/* Packet socket options */
@@ -50,6 +52,7 @@ struct sockaddr_ll {
#define PACKET_TX_TIMESTAMP 16
#define PACKET_TIMESTAMP 17
#define PACKET_FANOUT 18
+#define PACKET_RECV_TYPE 19
#define PACKET_FANOUT_HASH 0
#define PACKET_FANOUT_LB 1
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -296,6 +296,7 @@ struct packet_sock {
unsigned int tp_loss:1;
unsigned int tp_tstamp;
struct packet_type prot_hook ____cacheline_aligned_in_smp;
+ unsigned int pkt_type;
};
#define PACKET_FANOUT_MAX 256
@@ -1383,6 +1384,7 @@ static int packet_rcv_spkt(struct sk_buf
{
struct sock *sk;
struct sockaddr_pkt *spkt;
+ struct packet_sock *po;
/*
* When we registered the protocol we saved the socket in the data
@@ -1390,6 +1392,7 @@ static int packet_rcv_spkt(struct sk_buf
*/
sk = pt->af_packet_priv;
+ po = pkt_sk(sk);
/*
* Yank back the headers [hope the device set this
@@ -1402,7 +1405,7 @@ static int packet_rcv_spkt(struct sk_buf
* so that this procedure is noop.
*/
- if (skb->pkt_type == PACKET_LOOPBACK)
+ if (!(po->pkt_type & (1 << skb->pkt_type)))
goto out;
if (!net_eq(dev_net(dev), sock_net(sk)))
@@ -1595,12 +1598,12 @@ static int packet_rcv(struct sk_buff *sk
int skb_len = skb->len;
unsigned int snaplen, res;
- if (skb->pkt_type == PACKET_LOOPBACK)
- goto drop;
-
sk = pt->af_packet_priv;
po = pkt_sk(sk);
+ if (!(po->pkt_type & (1 << skb->pkt_type)))
+ goto drop;
+
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -1719,12 +1722,12 @@ static int tpacket_rcv(struct sk_buff *s
struct timespec ts;
struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
- if (skb->pkt_type == PACKET_LOOPBACK)
- goto drop;
-
sk = pt->af_packet_priv;
po = pkt_sk(sk);
+ if (!(po->pkt_type & (1 << skb->pkt_type)))
+ goto drop;
+
if (!net_eq(dev_net(dev), sock_net(sk)))
goto drop;
@@ -2590,6 +2593,7 @@ static int packet_create(struct net *net
spin_lock_init(&po->bind_lock);
mutex_init(&po->pg_vec_lock);
po->prot_hook.func = packet_rcv;
+ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
if (sock->type == SOCK_PACKET)
po->prot_hook.func = packet_rcv_spkt;
@@ -3187,6 +3191,16 @@ packet_setsockopt(struct socket *sock, i
return fanout_add(sk, val & 0xffff, val >> 16);
}
+ case PACKET_RECV_TYPE:
+ {
+ unsigned int val;
+ if (optlen != sizeof(val))
+ return -EINVAL;
+ if (copy_from_user(&val, optval, sizeof(val)))
+ return -EFAULT;
+ po->pkt_type = val & ~PACKET_LOOPBACK;
+ return 0;
+ }
default:
return -ENOPROTOOPT;
}
@@ -3257,6 +3271,13 @@ static int packet_getsockopt(struct sock
data = &val;
break;
+ case PACKET_RECV_TYPE:
+ if (len > sizeof(unsigned int))
+ len = sizeof(unsigned int);
+ val = po->pkt_type;
+
+ data = &val;
+ break;
case PACKET_VERSION:
if (len > sizeof(int))
len = sizeof(int);

View file

@ -1,15 +0,0 @@
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -78,7 +78,11 @@ int br_handle_frame_finish(struct sk_buf
dst = NULL;
- if (is_broadcast_ether_addr(dest))
+ if (skb->protocol == htons(ETH_P_PAE)) {
+ skb2 = skb;
+ /* Do not forward 802.1x/EAP frames */
+ skb = NULL;
+ } else if (is_broadcast_ether_addr(dest))
skb2 = skb;
else if (is_multicast_ether_addr(dest)) {
mdst = br_mdb_get(br, skb);

View file

@ -1,11 +0,0 @@
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -65,7 +65,7 @@ int br_handle_frame_finish(struct sk_buf
br_multicast_rcv(br, p, skb))
goto drop;
- if (p->state == BR_STATE_LEARNING)
+ if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE))
goto drop;
BR_INPUT_SKB_CB(skb)->brdev = br->dev;

View file

@ -1,103 +0,0 @@
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -139,6 +139,7 @@ struct net_bridge_port
unsigned long flags;
#define BR_HAIRPIN_MODE 0x00000001
+#define BR_ISOLATE_MODE 0x00000002
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
u32 multicast_startup_queries_sent;
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -149,6 +149,22 @@ static int store_hairpin_mode(struct net
static BRPORT_ATTR(hairpin_mode, S_IRUGO | S_IWUSR,
show_hairpin_mode, store_hairpin_mode);
+static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf)
+{
+ int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0;
+ return sprintf(buf, "%d\n", isolate_mode);
+}
+static ssize_t store_isolate_mode(struct net_bridge_port *p, unsigned long v)
+{
+ if (v)
+ p->flags |= BR_ISOLATE_MODE;
+ else
+ p->flags &= ~BR_ISOLATE_MODE;
+ return 0;
+}
+static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR,
+ show_isolate_mode, store_isolate_mode);
+
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
{
@@ -181,6 +197,7 @@ static struct brport_attribute *brport_a
&brport_attr_hold_timer,
&brport_attr_flush,
&brport_attr_hairpin_mode,
+ &brport_attr_isolate_mode,
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
&brport_attr_multicast_router,
#endif
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -98,7 +98,8 @@ int br_handle_frame_finish(struct sk_buf
skb2 = skb;
br->dev->stats.multicast++;
- } else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) {
+ } else if ((p->flags & BR_ISOLATE_MODE) ||
+ ((dst = __br_fdb_get(br, dest)) && dst->is_local)) {
skb2 = skb;
/* Do not forward the packet since it's local. */
skb = NULL;
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -109,7 +109,7 @@ void br_deliver(const struct net_bridge_
/* called with rcu_read_lock */
void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
{
- if (should_deliver(to, skb)) {
+ if (should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) {
if (skb0)
deliver_clone(to, skb, __br_forward);
else
@@ -164,7 +164,8 @@ out:
static void br_flood(struct net_bridge *br, struct sk_buff *skb,
struct sk_buff *skb0,
void (*__packet_hook)(const struct net_bridge_port *p,
- struct sk_buff *skb))
+ struct sk_buff *skb),
+ bool forward)
{
struct net_bridge_port *p;
struct net_bridge_port *prev;
@@ -172,6 +173,9 @@ static void br_flood(struct net_bridge *
prev = NULL;
list_for_each_entry_rcu(p, &br->port_list, list) {
+ if (forward && (p->flags & BR_ISOLATE_MODE))
+ continue;
+
prev = maybe_deliver(prev, p, skb, __packet_hook);
if (IS_ERR(prev))
goto out;
@@ -195,14 +199,14 @@ out:
/* called with rcu_read_lock */
void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb)
{
- br_flood(br, skb, NULL, __br_deliver);
+ br_flood(br, skb, NULL, __br_deliver, false);
}
/* called under bridge lock */
void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
struct sk_buff *skb2)
{
- br_flood(br, skb, skb2, __br_forward);
+ br_flood(br, skb, skb2, __br_forward, true);
}
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING

View file

@ -1,107 +0,0 @@
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -91,6 +91,12 @@ extern void addrconf_join_solict(struc
extern void addrconf_leave_solict(struct inet6_dev *idev,
const struct in6_addr *addr);
+extern int (*ipv6_dev_get_saddr_hook)(struct net *net,
+ struct net_device *dev,
+ const struct in6_addr *daddr,
+ unsigned int srcprefs,
+ struct in6_addr *saddr);
+
static inline unsigned long addrconf_timeout_fixup(u32 timeout,
unsigned unit)
{
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
@@ -6,7 +6,6 @@ config BRIDGE
tristate "802.1d Ethernet Bridging"
select LLC
select STP
- depends on IPV6 || IPV6=n
---help---
If you say Y here, then your Linux box will be able to act as an
Ethernet bridge, which means that the different Ethernet segments it
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
@@ -40,3 +40,4 @@ obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.
obj-y += addrconf_core.o exthdrs_core.o
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
+obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_stubs.o
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1111,7 +1111,7 @@ out:
return ret;
}
-int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
+static int __ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
const struct in6_addr *daddr, unsigned int prefs,
struct in6_addr *saddr)
{
@@ -1236,7 +1236,6 @@ try_nextdev:
in6_ifa_put(hiscore->ifa);
return 0;
}
-EXPORT_SYMBOL(ipv6_dev_get_saddr);
int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
unsigned char banned_flags)
@@ -4818,6 +4817,9 @@ int __init addrconf_init(void)
ipv6_addr_label_rtnl_register();
+ BUG_ON(ipv6_dev_get_saddr_hook != NULL);
+ rcu_assign_pointer(ipv6_dev_get_saddr_hook, __ipv6_dev_get_saddr);
+
return 0;
errout:
rtnl_af_unregister(&inet6_ops);
@@ -4836,6 +4838,9 @@ void addrconf_cleanup(void)
struct net_device *dev;
int i;
+ rcu_assign_pointer(ipv6_dev_get_saddr_hook, NULL);
+ synchronize_rcu();
+
unregister_netdevice_notifier(&ipv6_dev_notf);
unregister_pernet_subsys(&addrconf_ops);
ipv6_addr_label_cleanup();
--- /dev/null
+++ b/net/ipv6/inet6_stubs.c
@@ -0,0 +1,33 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <net/ipv6.h>
+
+int (*ipv6_dev_get_saddr_hook)(struct net *net, struct net_device *dev,
+ const struct in6_addr *daddr, unsigned int srcprefs,
+ struct in6_addr *saddr);
+
+EXPORT_SYMBOL(ipv6_dev_get_saddr_hook);
+
+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
+ const struct in6_addr *daddr, unsigned int prefs,
+ struct in6_addr *saddr)
+{
+ int ret = -EADDRNOTAVAIL;
+ typeof(ipv6_dev_get_saddr_hook) dev_get_saddr;
+
+ rcu_read_lock();
+ dev_get_saddr = rcu_dereference(ipv6_dev_get_saddr_hook);
+
+ if (dev_get_saddr)
+ ret = dev_get_saddr(net, dst_dev, daddr, prefs, saddr);
+
+ rcu_read_unlock();
+ return ret;
+}
+EXPORT_SYMBOL(ipv6_dev_get_saddr);
+

View file

@ -1,146 +0,0 @@
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -62,6 +62,15 @@ static int brnf_filter_pppoe_tagged __re
#define brnf_filter_pppoe_tagged 0
#endif
+int brnf_call_ebtables __read_mostly = 0;
+EXPORT_SYMBOL_GPL(brnf_call_ebtables);
+
+bool br_netfilter_run_hooks(void)
+{
+ return brnf_call_iptables | brnf_call_ip6tables | brnf_call_arptables |
+ brnf_call_ebtables;
+}
+
static inline __be16 vlan_proto(const struct sk_buff *skb)
{
if (vlan_tx_tag_present(skb))
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -488,15 +488,29 @@ static inline bool br_multicast_is_route
/* br_netfilter.c */
#ifdef CONFIG_BRIDGE_NETFILTER
+extern int brnf_call_ebtables;
extern int br_netfilter_init(void);
extern void br_netfilter_fini(void);
extern void br_netfilter_rtable_init(struct net_bridge *);
+extern bool br_netfilter_run_hooks(void);
#else
#define br_netfilter_init() (0)
#define br_netfilter_fini() do { } while(0)
#define br_netfilter_rtable_init(x)
+#define br_netfilter_run_hooks() false
#endif
+static inline int
+BR_HOOK(uint8_t pf, unsigned int hook, struct sk_buff *skb,
+ struct net_device *in, struct net_device *out,
+ int (*okfn)(struct sk_buff *))
+{
+ if (!br_netfilter_run_hooks())
+ return okfn(skb);
+
+ return NF_HOOK(pf, hook, skb, in, out, okfn);
+}
+
/* br_stp.c */
extern void br_log_state(const struct net_bridge_port *p);
extern struct net_bridge_port *br_get_port(struct net_bridge *br,
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -40,7 +40,7 @@ static int br_pass_frame_up(struct sk_bu
indev = skb->dev;
skb->dev = brdev;
- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL,
+ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, indev, NULL,
netif_receive_skb);
}
@@ -199,7 +199,7 @@ rx_handler_result_t br_handle_frame(stru
}
/* Deliver packet to local host only */
- if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
+ if (BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
NULL, br_handle_local_finish)) {
return RX_HANDLER_CONSUMED; /* consumed by filter */
} else {
@@ -224,7 +224,7 @@ forward:
if (!compare_ether_addr(p->br->dev->dev_addr, dest))
skb->pkt_type = PACKET_HOST;
- NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
br_handle_frame_finish);
break;
default:
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -55,7 +55,7 @@ int br_dev_queue_push_xmit(struct sk_buf
int br_forward_finish(struct sk_buff *skb)
{
- return NF_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev,
+ return BR_HOOK(NFPROTO_BRIDGE, NF_BR_POST_ROUTING, skb, NULL, skb->dev,
br_dev_queue_push_xmit);
}
@@ -74,7 +74,7 @@ static void __br_deliver(const struct ne
return;
}
- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
br_forward_finish);
}
@@ -91,7 +91,7 @@ static void __br_forward(const struct ne
skb->dev = to->dev;
skb_forward_csum(skb);
- NF_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev,
+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD, skb, indev, skb->dev,
br_forward_finish);
}
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -827,7 +827,7 @@ static void __br_multicast_send_query(st
if (port) {
__skb_push(skb, sizeof(struct ethhdr));
skb->dev = port->dev;
- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
dev_queue_xmit);
} else
netif_rx(skb);
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -52,7 +52,7 @@ static void br_send_bpdu(struct net_brid
skb_reset_mac_header(skb);
- NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
dev_queue_xmit);
}
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -2399,11 +2399,13 @@ static int __init ebtables_init(void)
}
printk(KERN_INFO "Ebtables v2.0 registered\n");
+ brnf_call_ebtables = 1;
return 0;
}
static void __exit ebtables_fini(void)
{
+ brnf_call_ebtables = 0;
nf_unregister_sockopt(&ebt_sockopts);
xt_unregister_target(&ebt_standard_target);
printk(KERN_INFO "Ebtables v2.0 unregistered\n");

View file

@ -1,20 +0,0 @@
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -856,7 +856,7 @@ static int pppoe_sendmsg(struct kiocb *i
goto end;
- skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
+ skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
0, GFP_KERNEL);
if (!skb) {
error = -ENOMEM;
@@ -864,7 +864,7 @@ static int pppoe_sendmsg(struct kiocb *i
}
/* Reserve space for headers. */
- skb_reserve(skb, dev->hard_header_len);
+ skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
skb_reset_network_header(skb);
skb->dev = dev;

View file

@ -1,11 +0,0 @@
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -142,7 +142,7 @@ static inline bool dev_xmit_complete(int
*/
#if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
-# if defined(CONFIG_MAC80211_MESH)
+# if 1 || defined(CONFIG_MAC80211_MESH)
# define LL_MAX_HEADER 128
# else
# define LL_MAX_HEADER 96

View file

@ -1,12 +0,0 @@
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -139,6 +139,9 @@ struct atm_trafprm {
int min_pcr; /* minimum PCR in cells per second */
int max_cdv; /* maximum CDV in microseconds */
int max_sdu; /* maximum SDU in bytes */
+ int scr; /* sustained rate in cells per second */
+ int mbs; /* maximum burst size (MBS) in cells */
+ int cdv; /* Cell delay varition */
/* extra params for ABR */
unsigned int icr; /* Initial Cell Rate (24-bit) */
unsigned int tbe; /* Transient Buffer Exposure (24-bit) */

View file

@ -1,29 +0,0 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -13,6 +13,16 @@ menuconfig PHYLIB
if PHYLIB
+config SWCONFIG
+ tristate "Switch configuration API"
+ ---help---
+ Switch configuration API using netlink. This allows
+ you to configure the VLAN features of certain switches.
+
+config SWCONFIG_LEDS
+ bool "Switch LED trigger support"
+ depends on (SWCONFIG && LEDS_TRIGGERS)
+
comment "MII PHY device drivers"
config MARVELL_PHY
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -3,6 +3,7 @@
libphy-objs := phy.o phy_device.o mdio_bus.o
obj-$(CONFIG_PHYLIB) += libphy.o
+obj-$(CONFIG_SWCONFIG) += swconfig.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_CICADA_PHY) += cicada.o

View file

@ -1,72 +0,0 @@
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
}
EXPORT_SYMBOL(phy_ethtool_gset);
+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
+{
+ u32 cmd;
+ int tmp;
+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ struct ethtool_value edata = { ETHTOOL_GLINK };
+
+ if (get_user(cmd, (u32 *) useraddr))
+ return -EFAULT;
+
+ switch (cmd) {
+ case ETHTOOL_GSET:
+ phy_ethtool_gset(phydev, &ecmd);
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+
+ case ETHTOOL_SSET:
+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+ return -EFAULT;
+ return phy_ethtool_sset(phydev, &ecmd);
+
+ case ETHTOOL_NWAY_RST:
+ /* if autoneg is off, it's an error */
+ tmp = phy_read(phydev, MII_BMCR);
+ if (tmp & BMCR_ANENABLE) {
+ tmp |= (BMCR_ANRESTART);
+ phy_write(phydev, MII_BMCR, tmp);
+ return 0;
+ }
+ return -EINVAL;
+
+ case ETHTOOL_GLINK:
+ edata.data = (phy_read(phydev,
+ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_ioctl);
+
/**
* phy_mii_ioctl - generic PHY MII ioctl interface
* @phydev: the phy_device struct
@@ -474,7 +518,7 @@ static void phy_force_reduction(struct p
int idx;
idx = phy_find_setting(phydev->speed, phydev->duplex);
-
+
idx++;
idx = phy_find_valid(idx, phydev->supported);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -510,6 +510,7 @@ void phy_start_machine(struct phy_device
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
int phy_mii_ioctl(struct phy_device *phydev,
struct ifreq *ifr, int cmd);
int phy_start_interrupts(struct phy_device *phydev);

Some files were not shown because too many files have changed in this diff Show more