KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
34345 commits 3 branches 0 tags 154 MiB
Commit graph

1479 commits

Author SHA1 Message Date
John Crispin
cc5194cf03 ramips: add support for Airlink101 AR670W 
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43153
 2014-11-03 08:00:13 +00:00
John Crispin
2f30ba5328 ralink: make sure a mii_bus is loaded before accesing its state 
this caused a crash on boot

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43120
 2014-10-30 10:10:57 +00:00
John Crispin
0b64dca49d ralink: load mt7530 driver on the 3 buffalo units 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43119
 2014-10-30 10:10:51 +00:00
John Crispin
0b19244498 ralink: mt7530 - force wan port up 
some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43117
 2014-10-30 08:44:00 +00:00
John Crispin
38692d14f2 ralink: fix mt7530 for newer silicon revisions 
latest mt7530 silicon seems to have a different phy id.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43113
 2014-10-30 08:07:49 +00:00
John Crispin
152d692a1f ramips: improve ralink ethernet driver 
Change list:
* add tx scatter gather function.
* add software rx vlan offload to let GRO work.
* add jumbo frame support. because use build_skb so max MTU is 3812.
* enable hardware tx vlan.
* enable GRO and remove LRO. because it can improve performance and can work on forwarding.
* enable/fix tx padding function.
* let napi handle tx clean up.
* support ethtool operation. now support message level, hardware status and coalesce.
* ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it.

Notes:
* build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a.
* TCP NAT performance improve. test with netperf.
  - rt2880(gigabit) from 5x to 12x Mbps.
  - rt3x5x from 6x to 94 Mbps.
  - rt5250 from 5x to 8x Mbps.
  - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame.
  - mt7620 still 94Mbps.
* TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43108
 2014-10-29 19:43:59 +00:00
John Crispin
c0bf47232a ralink: fix switch config on mt7530 evb 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43105
 2014-10-29 18:51:02 +00:00
John Crispin
8223e78121 ralink: fix a off by 4 bug in mt7530 
0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43104
 2014-10-29 18:49:46 +00:00
John Crispin
d0bf15f235 ramips: add support for A5-V11 board (resubmit) 
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
 2014-10-29 11:01:17 +00:00
John Crispin
d1a1ad3e66 ramips: fix filenames in PorayDualSize factory images 
SVN-Revision: 43073
 2014-10-26 17:18:45 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER 
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
 2014-10-24 19:34:02 +00:00
John Crispin
5c33e9565b ramips: add comments for image/Makefile. 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42991
 2014-10-20 06:29:51 +00:00
John Crispin
6e1637f8fa firmware-utils: restore compilation of mkhilinkfw. 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42989
 2014-10-20 06:29:38 +00:00
John Crispin
7bac455a4c ramips: add support for Nexx WT3020 devices 
SVN-Revision: 42983
 2014-10-20 06:28:48 +00:00
John Crispin
5b40a150ea ramips: sort boards in upgrade/platform.sh alphabetically 
SVN-Revision: 42982
 2014-10-20 06:28:39 +00:00
Felix Fietkau
35e9d448f2 ramips: fix usercfg partition offset for WHR-1166D 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42958
 2014-10-19 08:45:56 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator 
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
 2014-10-14 12:21:11 +00:00
John Crispin
06a849575d ralink: Build 8M image for 7Links PX-4885 
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42892
 2014-10-13 19:41:36 +00:00
John Crispin
1bbc5de86e ralink: various i2c related fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42868
 2014-10-10 08:56:53 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520 
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
 2014-10-10 08:56:43 +00:00
John Crispin
97c202968a ralink: various i2c fixes 
the driver did not handle all states correctly causing a deadlock of the i2c hw block.

Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>

SVN-Revision: 42807
 2014-10-06 20:05:13 +00:00
John Crispin
d76b7e0221 ramips: D-Link DIR-810L: make led naming consistent with other boards 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42789
 2014-10-06 04:52:36 +00:00
John Crispin
98114e7cdd ralink: Add missing code to free GPIO on Ralink SoC 
Signed-off-by: schildt@ibr.cs.tu-bs.de
Acked-by: info@gerhard-bertelsmann.de

SVN-Revision: 42788
 2014-10-06 04:52:26 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board 
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
 2014-10-06 04:52:07 +00:00
John Crispin
d4cc995c53 ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming 
SVN-Revision: 42619
 2014-09-19 11:07:08 +00:00
John Crispin
4ef1237545 ralink: drop dwc_otg support. dwc2 seems stable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42617
 2014-09-19 10:52:37 +00:00
John Crispin
17cf9c4593 ralink: drop 3.10 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42481
 2014-09-12 06:50:46 +00:00
Luka Perkov
02629d8f87 kernel: update 3.14 to 3.14.18 
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
 2014-09-10 21:40:19 +00:00
John Crispin
4662c3b847 ralink: dwc_otg->dwc2 
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42446
 2014-09-08 17:33:16 +00:00
John Crispin
bdba024c7b ralink: add dwc2 device_reset() call 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42445
 2014-09-08 17:32:52 +00:00
John Crispin
4d96ccd87a target: set myself as maintainer 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42335
 2014-08-30 09:59:18 +00:00
John Crispin
d1f8b9bd76 ralink: DIR-645 picks up incorrect MAC address in DTS file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42321
 2014-08-28 09:19:56 +00:00
John Crispin
24a6617585 ramips: unbreak i2c for 3.14 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42315
 2014-08-28 06:05:36 +00:00
John Crispin
1349ebb5ba ralink: set 3.14 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42305
 2014-08-26 13:12:12 +00:00
John Crispin
0c14bea523 ralink: the mt7620 evb has a usb port 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42293
 2014-08-25 16:31:13 +00:00
John Crispin
d3d9d55cde ralink: a few 3.14 related fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42292
 2014-08-25 16:31:09 +00:00
John Crispin
843fc45e27 ralink: fix mt7620 ohci 3.14 
the ohci phy was not reset properly

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42291
 2014-08-25 16:31:05 +00:00
John Crispin
ca737049d2 ralink: fix mt7620 ohci 3.10 
the ohci phy was not reset properly

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42290
 2014-08-25 16:31:01 +00:00
John Crispin
3d00a1109e ralink: mt7620 has obchi/ehci and not dwc2 
fix the default package selection

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42289
 2014-08-25 16:30:57 +00:00
John Crispin
fdc41e2fd7 ramips: enable second SPI for VoCore 
This patch enables the second SPI as spidev and also fixes some typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42277
 2014-08-25 06:35:46 +00:00
John Crispin
a3fd3dc796 ramips: second spi device on rt5350 
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.

I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42276
 2014-08-25 06:35:42 +00:00
John Crispin
e9e519a147 ramips: fix OMNI-PLUG.dts 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42232
 2014-08-21 06:41:27 +00:00
John Crispin
ff3ea02772 ramips: add omni plug leds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42201
 2014-08-18 16:09:21 +00:00
John Crispin
d04cab8dfc ramips: Add support for Omnima MiniPlug 
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

SVN-Revision: 42200
 2014-08-18 16:06:48 +00:00
John Crispin
be6bbc7975 ramips: fix switch config for Edimax 3G-6200n 
Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42194
 2014-08-18 13:10:04 +00:00
John Crispin
60bf96e3a0 ralink: clean up HAME profiles, remove unnecessary packages. 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42192
 2014-08-18 13:09:46 +00:00
John Crispin
a62e8bd145 ramips: add mpr-a1 to default profile 
Add hame mpr-a1 to default ramips profile.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42191
 2014-08-18 13:09:43 +00:00
John Crispin
bb9a23aca2 ramips: Hame: change LED name mpr-x -> hame 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42190
 2014-08-18 13:09:39 +00:00
John Crispin
0fc4383d69 ramips: make use of the new board detection layer 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42186
 2014-08-18 13:09:20 +00:00
John Crispin
3a9752bbd2 ramips: add a workaround to fix failsafe on RT5350 
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42179
 2014-08-18 13:08:52 +00:00
John Crispin
f80312613d ramips: enable additional GPIOs on HAME MPR-A1 
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.

Tested on hardware.

[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42178
 2014-08-18 13:08:48 +00:00
John Crispin
bf1e92f526 ralink: add back the gpio_export_named() patch for 3.14 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42176
 2014-08-18 13:08:33 +00:00
John Crispin
bc67bd2295 ralink: add 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42040
 2014-08-07 14:41:19 +00:00
John Crispin
997ca19fd2 ralink: revert r37163 
https://dev.openwrt.org/ticket/17071

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42036
 2014-08-07 12:38:20 +00:00
John Crispin
17b8d9c976 ramips: add profile for easyacc wizard8800 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41986
 2014-08-03 14:31:18 +00:00
John Crispin
058a5c85ef firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting 
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 41962
 2014-08-03 11:13:58 +00:00
John Crispin
04e4ff282a ramips:support Lenovo AC1200 Wireless router 
Lenovo AC1200 series has two types, Y1 and Y1S.
Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port.

Signed-off-by: Lintel <lintel.huang@gmail.com>

SVN-Revision: 41961
 2014-08-03 11:13:52 +00:00
John Crispin
21845cb45d ramips: Add support for VoCore 
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41939
 2014-08-01 20:51:24 +00:00
John Crispin
7d9bac5247 ramips: Add support for SPI_CS1 pinmux 
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41938
 2014-08-01 20:51:14 +00:00
John Crispin
9efd7ebd34 ramips: add support for easyacc wizard8800 
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>

SVN-Revision: 41936
 2014-08-01 11:19:50 +00:00
John Crispin
c6674722b9 ramips: Fix LEDs on the Kingston MLW221 
LED Fix up for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41933
 2014-08-01 11:19:39 +00:00
John Crispin
6fb04ff871 ramips: correct typo ubsphy -> usbphy 
This appears to be a typo.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41859
 2014-07-28 15:26:36 +00:00
John Crispin
6f6dc62ca2 ramips: fix mode switch gpio for AsiaRF AWM eval board 
Fix a typo: gpio 21 is already used for the WPS led.  Gpio 20 is the
right one (tested) for the mode switch.  Confirmed that
/sys/kernel/debug/gpio state followed the position of the switch.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41858
 2014-07-28 15:26:32 +00:00
John Crispin
636f2b83e6 ramips: add ethernet macaddr to dts for AWM003-EVB 
Follows the pattern of http://patchwork.openwrt.org/patch/5970/

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41857
 2014-07-28 15:26:23 +00:00
John Crispin
5b4abf87d7 ramips: add support for Kingston MLW221 
This patch adds support for the Kingston Mobilelite Wireless (MLW-221)

http://wiki.openwrt.org/toh/kingston/mlw221

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41841
 2014-07-26 20:36:22 +00:00
John Crispin
b77e92e020 ramips: ethernet mac cleanup 
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839
 2014-07-26 20:36:09 +00:00
John Crispin
443aee86bf ramips: fix vlan configuration for asiarf avm003 
The earlier r41797 change was missing this part, to enable the right
vlan configuration.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41838
 2014-07-26 20:36:01 +00:00
John Crispin
08fb5fb326 ramips: fix sysupgrade for asiarf awm003 
Since the earlier r41797 change, the board_name for awm003 has been
miscalculated, and sysupgrade has been broken.  This seems to fix it.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41837
 2014-07-26 20:35:46 +00:00
John Crispin
0b5b8de818 ramips: fix gpio mapping on MZK-750DHP 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41811
 2014-07-23 07:49:54 +00:00
John Crispin
e5d4e5dee3 ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends. 
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 41810
 2014-07-23 07:49:50 +00:00
John Crispin
2c356c4bb7 ramips: add a profile for AWM003 
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41797
 2014-07-22 09:58:21 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 41776
 2014-07-20 17:31:11 +00:00
John Crispin
4d22954db0 ramips: fix mac address partitions on ASL-26555 
ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on  uboot-env corresponds to D-Link.
ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41768
 2014-07-20 17:30:28 +00:00
John Crispin
f44d3f9980 ramips: soc wmac eeprom cleanup 
Move eeprom extraction from scripts to dts files.
Additionally there are few other changes like:
- whitespace fixes
- add partition labels where needed
- BR6524N board doesn't exist (lost in translation?)
- fix Edimax 3g-6200nl model
- add wmac eeprom to dts for Asus RT-N14U board

Compile tested all subtargets and their profiles.
Run tested on:
- Asus RT-N15
- Asus RT-N14U
- Buffalo WHR-600D
- Argus ATP52B
- Sparklan WCR-150GN

Few problems noted:
- many boards didn't have wmac eeprom information defined at all
- several boards don't have any patitions defined (see FIXME comments in dts)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41680
 2014-07-17 10:55:31 +00:00
John Crispin
74db9511dc ramips: basic support for Planex MZK-750DHP 
some gpios are still missing.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41654
 2014-07-14 17:10:39 +00:00
John Crispin
e33584f6b8 ramips: squelch mdio debugging info on rt2880 ethernet 
Use pr_debug rather than pr_info since it is only relevant
for debugging.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 41653
 2014-07-14 17:05:40 +00:00
John Crispin
76ba6846a2 ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41634
 2014-07-14 07:38:32 +00:00
John Crispin
8c577d9fde ramips: extract mac address from flash on WHR-600D board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41633
 2014-07-14 07:38:28 +00:00
John Crispin
4af1b51ec3 ramips: extract default lan_mac from eth0 
The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts.
But lan_mac is not set by default, this results in lan and wan having the same mac.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41632
 2014-07-14 07:38:23 +00:00
John Crispin
ba3988fb16 ramips: add support for WR8305RT board 
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41584
 2014-07-12 06:54:03 +00:00
John Crispin
03faf4618e ramips: add support for Zbtlink WA05 router 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41579
 2014-07-10 22:02:28 +00:00
John Crispin
6134a3de30 target/linux/*: more dead package cleanups 
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41574
 2014-07-10 20:15:50 +00:00
John Crispin
32e93efc73 target/linux/*: more dead package cleanups 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
 2014-07-10 20:05:43 +00:00
John Crispin
94802dca60 ralink: wpa does not exist, use wpad-mini instead 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41561
 2014-07-10 19:16:19 +00:00
John Crispin
bbfb3baaed ramips: add missing rt3352 usb phy node to dts 
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41476
 2014-07-02 16:37:30 +00:00
John Crispin
62287e589d ramips: fix target rt5350 only have 28 gpios 
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41475
 2014-07-02 16:37:26 +00:00
John Crispin
80e3282739 ralink: make xhci platform depend on mt7621 
this broke CONFIG_ALL builds for mt7620

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41471
 2014-07-02 14:32:43 +00:00
John Crispin
3d81a4ef82 ralink: add Wansview NCS601W IP Camera 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453
 2014-07-02 07:42:44 +00:00
John Crispin
c749b310ed ralink: register wifi firmware for WRTnode 
After r41444 wifi working on WRTnode. Tested.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41452
 2014-07-01 18:17:55 +00:00
John Crispin
9c84f72f85 ramips: set default vid of each vlan, so it won't need be set explicitly. 
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41448
 2014-07-01 13:18:27 +00:00
John Crispin
4ddc0f9ff3 ramips: add WHR-1166 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41447
 2014-07-01 10:26:42 +00:00
John Crispin
3c88de0d47 ramips: sync the WHR-600D flash layout with that of the vendor FW 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41446
 2014-07-01 10:26:38 +00:00
John Crispin
2e8c6e4128 ramips: add wmac to mt7620a device tree 
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41445
 2014-07-01 10:26:33 +00:00
John Crispin
5f6e7e1f44 ramips: add wmac to mt7620n device tree 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41444
 2014-07-01 10:26:30 +00:00
John Crispin
bbd8f9c96a ramips: enable wmac clock for mt7620 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41443
 2014-07-01 10:26:25 +00:00
John Crispin
22c4f2475b ralink: refresh kernel patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41353
 2014-06-26 13:47:50 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44 
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
 2014-06-26 13:47:42 +00:00
John Crispin
975728813a ralink: fix up WRTNode vs WRTNODE in the dts file 
https://dev.openwrt.org/ticket/16899

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41343
 2014-06-26 11:43:26 +00:00
John Crispin
021e728962 ralink: Update MT7530 switch driver. 
- Support set VLAN ID of each vlan.
- Support untag feature.
- Replace register address with C MACRO.
- There are 8 ports for MT7530 actually.

Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41331
 2014-06-24 18:14:14 +00:00
John Crispin
9284956ad8 ramips: cleanup some rt305x profiles 
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41271
 2014-06-19 14:13:07 +00:00
John Crispin
dc5fe5f73f ramips: RT-N56U support fixes and factory image creation 
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

SVN-Revision: 41224
 2014-06-16 18:57:20 +00:00
John Crispin
4d7ed2a8a0 ramips: fixes XDXRN502J reset button 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41217
 2014-06-16 18:54:53 +00:00
John Crispin
2fe435081d ramips: add vlan configuration for asiarf awm002-evb 
Without this, the ports all end up on vlan 1.  This enables a separate
WAN port that works.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41216
 2014-06-16 18:54:48 +00:00
John Crispin
ab390d6c05 ramips: restore AWM002-EVB profile in asiarf.mk 
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board.  This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.

Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41215
 2014-06-16 18:54:42 +00:00
John Crispin
6d213a644d ramips: add asiarf awapn2403 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
 2014-06-13 09:16:15 +00:00
Felix Fietkau
231f15c9db ramips: fix rt2x00 handling of default packages for subtargets 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41145
 2014-06-11 17:01:19 +00:00
John Crispin
3306a4f9ab ralink: fix asiarf/awm002 switch setup 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40939
 2014-06-02 12:44:57 +00:00
John Crispin
7437d84814 ralink: add seama image can be upgrade by sysupgrade 
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40922
 2014-06-02 12:43:49 +00:00
John Crispin
f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC 
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
 2014-06-02 12:43:22 +00:00
John Crispin
712dec1027 ramips: add missing profile for DIR-615-D 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40911
 2014-06-02 12:43:07 +00:00
John Crispin
9b728bebfb ramips: fix not set lan/wan mac address 
The first switch case is default case. Then it will only
match default case. cause not update the lan/wan mac address.
And in the default switch case the param lan_mac is empty.
it will case error message 'arithmetic syntax error' when
call macaddr_add function.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40910
 2014-06-02 12:43:04 +00:00
John Crispin
813a7c3827 ralink: Add support for samsung cy-swr1100 wireless router 
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908
 2014-06-02 12:42:52 +00:00
John Crispin
efd09832fe ramips: Support for Teltonika RUT5XX 
Hi Hartmut,

Thanks for your feedback, I have reformated the patch accordingly.

Added support for Teltonika RUT5XX hardware.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>

SVN-Revision: 40907
 2014-06-02 12:42:48 +00:00
John Crispin
583b908bc7 ralink: Enable Asus RT-N10+ in menuconfig targets 
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>

SVN-Revision: 40903
 2014-06-02 12:41:45 +00:00
John Crispin
4a7a0d2536 ralink: add dir-645 to the eeprom hotplug script 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40561
 2014-04-23 07:52:56 +00:00
John Crispin
720a0a1df1 ramips: register clock device for the WMAC on RT3883 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40557
 2014-04-23 07:51:57 +00:00
John Crispin
cd5f3584e2 ramips: Add support for the 7Links PX-4885 wireless router. 
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

SVN-Revision: 40554
 2014-04-22 08:08:51 +00:00
John Crispin
284ada8a3e ramips: build factory-compatible image for AR725W 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40552
 2014-04-22 08:08:42 +00:00
John Crispin
cb91087991 ramips: add Airlink101 AR725W userland support 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40550
 2014-04-22 08:08:35 +00:00
John Crispin
2b2d274bfa ramips: Add Airlink101 AR725W board support 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40549
 2014-04-22 08:08:31 +00:00
John Crispin
010dcd092f ralink: add port_init for rt2880 
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40504
 2014-04-13 18:01:08 +00:00
John Crispin
7ae1d573ae Fix Asus rt-n15 board support 
* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40494
 2014-04-12 21:22:04 +00:00
John Crispin
3d6ba83fe4 rt2880 DT fixes 
* add pinctrl
* fix ethernet port
* make wifi available by default

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40493
 2014-04-12 21:22:00 +00:00
John Crispin
fa86c30538 Fix pinmux-rt2880 
The last arg to FUNC() is count, not last pin.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40492
 2014-04-12 21:21:56 +00:00
John Crispin
73160c1ad6 Add wmac clock for rt2880 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40491
 2014-04-12 21:21:53 +00:00
John Crispin
72803e0e27 Don't try to generate whr-g300n image if it's going to be more than 4M 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40489
 2014-04-12 21:21:44 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
 2014-04-12 11:59:07 +00:00
John Crispin
f1e31f8266 ralink: fix WHR-300HP2 mtd size 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40419
 2014-04-07 15:10:26 +00:00
Felix Fietkau
8f41856f1f ramips: fix regression from r39949 (#15382) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40391
 2014-04-06 00:09:50 +00:00
John Crispin
5b6ceab69b ralink: fix chuncked-io module 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40342
 2014-03-30 19:03:55 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
 2014-03-27 09:28:33 +00:00
John Crispin
4835ea949f ralink: add missing OF node 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39950
 2014-03-18 19:22:13 +00:00
John Crispin
332b94fbd5 ralink: refresh patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39949
 2014-03-18 19:21:56 +00:00
John Crispin
375e02ac3d ralink: add missing clk_set_rate() 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39896
 2014-03-12 19:33:01 +00:00
John Crispin
96fa58bafd ralink: add support for wrtnode 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39786
 2014-03-07 09:54:59 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
John Crispin
b56bef28d7 ralink: add support for na930 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
 2014-02-18 13:33:25 +00:00
John Crispin
55383946dc ralink: add gpio_uartf mux group 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39610
 2014-02-18 13:33:20 +00:00
John Crispin
363512b8c6 ralink: fix the gpio mode mapping 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39609
 2014-02-18 13:33:16 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
 2014-01-26 11:30:34 +00:00
John Crispin
ebaa3817a7 ralink: activate xhci config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39330
 2014-01-19 17:27:31 +00:00
John Crispin
a818a3cf8f ralink: backport various fixes from linux-mti 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39329
 2014-01-19 17:27:22 +00:00
John Crispin
a75b692557 ralink: add xhci driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39328
 2014-01-19 17:27:13 +00:00
John Crispin
f3a243c3dd ramips: Add profile for the Edimax BR-6475nD 
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39299
 2014-01-15 18:29:51 +00:00
John Crispin
beb29461ff ramips: Add userspace support for the Edimax BR-6475nD 
The rt2x00 wifi driver may still need updating to
function with this device.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39298
 2014-01-15 18:29:44 +00:00
John Crispin
62dd252b86 ramips: rt3883: Fix a typo in rt3883.dtsi 
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39297
 2014-01-15 18:29:03 +00:00
John Crispin
9821ce8ed6 ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39248
 2014-01-12 17:26:24 +00:00
John Crispin
03ef20ce6f ralink: fix eeprom loading 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39245
 2014-01-12 14:03:15 +00:00
John Crispin
4282d796ea ralink: fix WHR-600D and WHR-300HP image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39241
 2014-01-12 12:12:58 +00:00
John Crispin
a7f53759f5 ralink: fix WHR-600D pcie support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39240
 2014-01-12 12:12:53 +00:00
John Crispin
3a64ddd0a1 ralink: add HLK-RM04 support 
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39237
 2014-01-12 12:07:40 +00:00
John Crispin
aa2be01076 ralink: switch to askconsole 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39236
 2014-01-12 12:07:34 +00:00
John Crispin
665c51935e ralink: fix uartf memory range size 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39235
 2014-01-12 12:07:30 +00:00
John Crispin
6278a892d8 ralink: honour memory@0 node 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39234
 2014-01-12 12:07:26 +00:00
John Crispin
0ac291d073 ralink: fix rt5350 ethernet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39233
 2014-01-12 12:07:20 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
 2014-01-11 16:06:37 +00:00
John Crispin
9715b61b3c ralink: fix tso regression in the ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39168
 2013-12-27 21:14:49 +00:00
John Crispin
9739a0b41b ramips: add support for RT-N14U (mt7620n based) board 
added dts file and userspace scripts modified to support Asus RT-N14U board

current support status:
usb        works
ethernet   works
buttons    reset, wps
leds       asus:blue:[usb|lan|wan|air|power]
i2c        not tested
uart       not tested
wifi       not yet

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 39163
 2013-12-25 17:04:50 +00:00
John Crispin
93d8dc870e ramips: add gpio pin 72 in mt7620 chips to dtsi files 
describes register set to control last gpio pin on mt7620 platfrom

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 39162
 2013-12-25 17:04:34 +00:00
John Crispin
6218da5a41 ralink: fix dir810 networking 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39093
 2013-12-16 10:16:33 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
 2013-12-15 19:16:30 +00:00
John Crispin
b4b0a55aab ralink: add mt7621 support 
there are still various missing pieces for full support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39040
 2013-12-13 10:53:34 +00:00
John Crispin
0ef939c93b ralink: add TSO 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39019
 2013-12-09 17:29:29 +00:00
John Crispin
09a933ed73 ralink: fix typo in gpio irq handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39018
 2013-12-09 17:29:24 +00:00
John Crispin
a65c9e5b20 ralink: add mt7620a gdma info to dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39017
 2013-12-09 17:29:19 +00:00
John Crispin
d203784841 ralink: add asoc modules 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39016
 2013-12-09 17:29:14 +00:00
John Crispin
be10895651 ralink: add partially working asoc driver. codec is not fully functional yet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39015
 2013-12-09 17:29:08 +00:00
John Crispin
231eca9375 ralink: add helper that identifies the mt7620 ECO 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39014
 2013-12-09 17:29:03 +00:00
John Crispin
833943b410 ralink: add dma engine support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39013
 2013-12-09 17:28:43 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
 2013-12-01 09:59:53 +00:00
John Crispin
2370126b9b ramips: Fix initial network configuration for few boards 
Argus ATP52B:      ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645:     seems to be a redundant case

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38960
 2013-11-30 08:36:56 +00:00
John Crispin
f8fe6a090a ramips: Fix dts typos 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38959
 2013-11-30 08:36:47 +00:00
John Crispin
bb2b428a5c ralink: dts fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38917
 2013-11-26 09:51:57 +00:00
John Crispin
6295f38c8f ralink: add mac address detection for Asus RT-G32 b1 
http://patchwork.openwrt.org/patch/4463/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38910
 2013-11-25 14:09:08 +00:00
John Crispin
93e9a71538 base-files: allow users to delect debug level during boot 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38909
 2013-11-25 08:34:55 +00:00
John Crispin
8ee2b91ddd ralink: fix up the mt7530 driver to work properly with gmac2 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38905
 2013-11-25 08:34:23 +00:00
John Crispin
d84238ad26 ralink: add LRO support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38904
 2013-11-25 08:34:12 +00:00
John Crispin
f732ed4500 ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38903
 2013-11-25 08:34:01 +00:00
John Crispin
5b437e204f ralink: set the mac addr via the dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38902
 2013-11-25 08:33:42 +00:00
John Crispin
d175740783 ralink: set wmr-300 mac properly 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38872
 2013-11-19 21:13:24 +00:00
John Crispin
40109bb89b ralink: add missing CONFIG_ symbol to mt7620n 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38867
 2013-11-19 16:33:43 +00:00
John Crispin
82e6242798 ralink: add support for ralink mt7620 nand eval board 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38848
 2013-11-18 09:35:41 +00:00
John Crispin
a17e5159ac ralink: improve mt7620n detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38847
 2013-11-18 09:35:32 +00:00
John Crispin
f307b35c8b ralink: add mt7620 nand driver 
This is a minor rework of the SDK driver. This driver needs a full rewrite.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38846
 2013-11-18 09:35:23 +00:00
John Crispin
9d4eb0ac91 ralink: make all none 3x5x boards default to a vlan1/2 setup 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38845
 2013-11-18 09:35:14 +00:00
John Crispin
3d547b740a ralink: make usb work on the mt7530 eval kit 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38844
 2013-11-18 09:34:46 +00:00
John Crispin
269cbfa06a ralink: add mt7620n dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38829
 2013-11-17 13:22:01 +00:00
John Crispin
5c2e867460 ramips: fix wmr300 network detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38828
 2013-11-17 13:14:46 +00:00
John Crispin
dce9b292bf ralink: add mt7620n support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38823
 2013-11-16 20:28:52 +00:00
Felix Fietkau
9aca892304 ramips: use dd bs=4096k instead of bs=4M to make it more portable 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38806
 2013-11-14 19:16:04 +00:00
Felix Fietkau
682e134b02 ramips: select kmod-rt2800-soc by default (if available) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38784
 2013-11-13 10:29:10 +00:00
John Crispin
191af20982 ramips: use gpio-button-hotplug in favour of the input variant 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38735
 2013-11-11 13:40:20 +00:00
John Crispin
33111eff95 ramips: make the rfkill switch work on fonera20n 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38734
 2013-11-11 13:40:17 +00:00
John Crispin
3de4bdc36f ralink: revert 38348 as it breaks network on the hame-mpr 
https://dev.openwrt.org/changeset/38348
https://dev.openwrt.org/ticket/14403#comment:1

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38669
 2013-11-07 12:45:52 +00:00
John Crispin
4bb29e9df6 ralink: fix c&p error in gpio driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38668
 2013-11-07 12:45:48 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
 2013-11-05 08:25:45 +00:00
Gabor Juhos
379b509362 ramips: enable building of TEW-692GR images 
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.

Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38603
 2013-10-30 07:06:24 +00:00
Gabor Juhos
dfd4311355 ramips: fix number of GPIOs for RT3352 
The RT3352 SoC only supports 46 GPIO lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38602
 2013-10-30 07:06:23 +00:00
Gabor Juhos
9186fb342e ramips: remove trailing whitespaces from .dts{,i} files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38601
 2013-10-30 07:06:22 +00:00
John Crispin
176b41d441 ralink: add package for mt7620 sdhci 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38553
 2013-10-28 06:47:56 +00:00
John Crispin
36e029b3eb ralink: dont include mt7620 sdhci support inside the kernel 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38552
 2013-10-28 06:47:48 +00:00
John Crispin
7c7225a19d ralink: add support for missing mt7620 mux values 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38551
 2013-10-28 06:47:39 +00:00
John Crispin
43de7c1cfa ralink: add support for 2 new mt7620 boards made by buffalo 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38550
 2013-10-28 06:47:31 +00:00
John Crispin
849f74f930 ralink: pinctrl fix for non muxed pins 
Pins with no mux option failed to be recognized as gpios.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38540
 2013-10-26 12:24:55 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
 2013-10-23 12:51:05 +00:00
John Crispin
9a97c56535 ralink: fix default vlan mapping for MT7620a_MT7610e 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38418
 2013-10-15 14:56:49 +00:00
Hauke Mehrtens
81e2f00367 kernel: update kernel to 3.10.15 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
 2013-10-13 19:28:29 +00:00
John Crispin
b93e5498ae ralink: fixes mpr a1/a2 network setup 
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38348
 2013-10-09 10:08:52 +00:00
John Crispin
e382d2c7e6 ralink: add support for the mt7530 eval board 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38345
 2013-10-08 21:10:15 +00:00
John Crispin
697bb191b0 ralink: add missing header file to mt7530 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38344
 2013-10-08 21:10:00 +00:00
John Crispin
c903de043e ralink: fix asiarf image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38324
 2013-10-07 15:02:44 +00:00
John Crispin
ddcb800018 ralink: split mt7530 driver out of the gsw driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38323
 2013-10-07 15:02:39 +00:00
John Crispin
c077698e38 ralink: build recovery images for dcs930 ip cam 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38322
 2013-10-07 15:02:35 +00:00
John Crispin
420c62205b ralink: DIR610A1 Fix remaining issues 
This patch fixes:

 - Ethernet and Wireless LEDs
 - Wireless MAC Address
 - Remove whitespaces from dts file

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 38321
 2013-10-07 15:02:31 +00:00
John Crispin
5eacfc1c60 ralink: MT7620 eval board pinmux fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38320
 2013-10-07 15:02:27 +00:00
John Crispin
cc58dd26d3 ralink: make cevt systick selectable via kconfig 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38319
 2013-10-07 15:02:23 +00:00
John Crispin
baf9d53792 ralink: fix mt7620a pinmux 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38318
 2013-10-07 15:02:18 +00:00
John Crispin
65bb48cf23 ralink: dts fixes 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38265
 2013-09-30 20:48:39 +00:00
John Crispin
52fe1211b3 ralink: fix DIR-320-B1 board detection 
https://dev.openwrt.org/ticket/14226

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38264
 2013-09-30 20:48:34 +00:00
John Crispin
396cb4f405 ralink: Change size of image for DIR-320 B1 to 8MB 
http://patchwork.openwrt.org/patch/4102/

Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru>

SVN-Revision: 38263
 2013-09-30 20:48:27 +00:00
Gabor Juhos
9c8a5ef115 kernel: update 3.10 to 3.10.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
 2013-09-27 07:19:21 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
 2013-09-26 17:53:14 +00:00
Gabor Juhos
0380904acb kernel/3.10: refresh all target patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
 2013-09-25 17:13:24 +00:00
Gabor Juhos
76a1617063 ramips: sync 3.10 configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38181
 2013-09-25 16:39:23 +00:00
John Crispin
08abb8822b ralink: make dcs930 uvc camera work 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38054
 2013-09-19 05:57:00 +00:00
John Crispin
c0f6bf05f4 ralink: add support for dalink dcs930l ipcam 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053
 2013-09-19 05:56:46 +00:00
John Crispin
898c164b46 ralink: add back dwc_otg driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38052
 2013-09-19 05:56:31 +00:00
John Crispin
5722b32acf ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350 
https://dev.openwrt.org/ticket/14129

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38040
 2013-09-18 16:31:37 +00:00
John Crispin
8cd1c99707 ralink: add pinctrl driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38026
 2013-09-17 21:45:44 +00:00
John Crispin
66bed0b019 ralink: change subtarget order 
this will make image builder build rt305x targets per default

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38025
 2013-09-17 21:45:39 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split 
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
 2013-09-15 17:03:29 +00:00
Gabor Juhos
554772a665 kernel: update 3.10 to 3.10.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
 2013-09-15 16:00:41 +00:00
Gabor Juhos
d120ec18b2 kernel: update 3.10 to 3.10.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37890
 2013-09-02 19:12:54 +00:00
Gabor Juhos
043edd8074 kernel: update 3.10 to 3.10.9 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
 2013-08-23 17:31:04 +00:00
Gabor Juhos
a76371970e ramips: remove lantiq specific patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37830
 2013-08-23 17:07:28 +00:00
Gabor Juhos
9330662208 ramips: use correct image size parameter for DIR-610 A1 
Fixes the following error:

  bash: line 0: [: ralink_default_fw_size_4M: integer expression expected

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37829
 2013-08-23 17:07:27 +00:00
Gabor Juhos
0ebe286761 ramips: use correct parameters in the Seama template 
Fixes DIR-645 image generation errors:

  bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected
  ...
  bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64")  make[4]: *** [install] Error 1

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37828
 2013-08-23 17:07:26 +00:00
Gabor Juhos
3afc3824ca ramips: update the RT3883 PCI patch 
Fix the following warning:

  arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
  arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]

Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37827
 2013-08-23 17:07:25 +00:00
John Crispin
dc7164d4ef ramips: DIR-610-A1 Support 
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
 2013-08-14 19:35:27 +00:00
John Crispin
97a7daa72f ramips: fix typo in network uci_defaults script 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37784
 2013-08-14 19:08:55 +00:00
John Crispin
41f62983d3 ramips: dts file cleanup 
cleanup some inconsistencies in the dts files

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37783
 2013-08-14 19:08:44 +00:00
John Crispin
36e3424fa5 ramips: add support for dir810l and asus rp-n53 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37780
 2013-08-14 18:15:35 +00:00
John Crispin
632a3e3a79 ramips: various updates to the mt7620 dtsi file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37779
 2013-08-14 18:15:26 +00:00
John Crispin
9e5b0cc19c ramips: update v3.10 patches 
Sync the patches with those sent upstream for v3.12.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37778
 2013-08-14 18:15:15 +00:00
Gabor Juhos
9257d556c2 ramips: re-implement PCI mux 
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37708
 2013-08-05 12:49:19 +00:00
Gabor Juhos
c80dd34924 ramips: allow to build Seama firmware images with arbitrary size 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37707
 2013-08-05 12:35:22 +00:00
John Crispin
169e184521 ramips: add Poray IP2202 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37640
 2013-08-01 14:31:15 +00:00
John Crispin
ce4228b417 ramips: add Poray X8 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37639
 2013-08-01 14:31:09 +00:00
John Crispin
54968110f1 ramips: add Poray X5/X6 Support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638
 2013-08-01 14:31:04 +00:00
John Crispin
0dc3b44b0d ramips: add Poray M4 4M/8M support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
 2013-08-01 14:30:58 +00:00
John Crispin
23d3b705df ramips: add Poray M3 support 
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37636
 2013-08-01 14:30:53 +00:00
John Crispin
aaedf6c8c6 ramips: add basics for Poray devices 
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37635
 2013-08-01 14:30:46 +00:00
John Crispin
046b282429 ralink: add mt7620a_mt7610e profile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37633
 2013-08-01 14:30:33 +00:00
Felix Fietkau
28d03a9983 kernel: update remaning platforms accidentally left out of r37617 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
 2013-07-30 08:00:25 +00:00
John Crispin
c2600d13d1 ramips: fix indenting of spi partitions inside dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37609
 2013-07-29 13:10:26 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
John Crispin
8dd30fa775 ramips: add MPR-A1 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
 2013-07-27 09:23:52 +00:00
John Crispin
13b7ab81cf ralink: gpio driver should not set gpio to input when irq is querired 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37567
 2013-07-27 09:23:45 +00:00
John Crispin
eb089abd28 ramips: add back dwc_otg driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37566
 2013-07-27 09:23:40 +00:00
John Crispin
718b47f0b4 ramips: MPR-A2 should use memory auto detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37565
 2013-07-27 09:23:34 +00:00
John Crispin
115c6f85cf ramips: enable usb phy support on rt5350 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
 2013-07-27 09:23:29 +00:00
John Crispin
f4c4ca0b00 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37563
 2013-07-27 09:23:24 +00:00
John Crispin
c4413b6e08 ramips: unbreak asiarf dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37561
 2013-07-26 15:19:19 +00:00
Gabor Juhos
e9688455f6 kernel: update 3.10 to 3.10.3 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
 2013-07-26 07:19:58 +00:00
John Crispin
04aaf7a03e ramips: disable hg255d 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37532
 2013-07-25 17:03:08 +00:00
John Crispin
7feebeb193 ramipe: disable HG255D support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37531
 2013-07-25 16:55:48 +00:00
John Crispin
9b2c7be0c4 ramips: important patch for HG255D 
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!

This patch shrink firmware part in mtd layout to exclude origin factory part, and  I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37530
 2013-07-25 16:01:58 +00:00
John Crispin
3ad136d9e3 ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. 
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

SVN-Revision: 37521
 2013-07-24 08:54:41 +00:00
John Crispin
3f3cac6136 ramips: fix HG255D VLAN initial detect issue 
Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37517
 2013-07-23 13:07:00 +00:00
John Crispin
0cc1e2acb4 ramips: Add support for Huawei HG255D in trunk 
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37505
 2013-07-22 15:36:39 +00:00
Gabor Juhos
ef944dcb85 kernel: update 3.10 to 3.10.2 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37502
 2013-07-22 15:31:13 +00:00
John Crispin
8d0cd50f30 ralink: set remove dwc_otg from default packages and use dwc2 instead 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37499
 2013-07-22 13:52:52 +00:00
John Crispin
ffe389c4c5 ralink: remove dwc_otg from modules.mk 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37498
 2013-07-22 13:52:44 +00:00
John Crispin
5525b2136e ralink: set v3.10 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37497
 2013-07-22 13:52:32 +00:00
Jonas Gorski
b1b4e7db13 kernel: move CONFIG_NET_IP_TUNNEL to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37465
 2013-07-19 22:58:01 +00:00
John Crispin
8028fb8096 ramips: add sysupgarde support for wl-330n3g 
https://dev.openwrt.org/ticket/13891

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37376
 2013-07-17 09:44:57 +00:00
John Crispin
dd22304691 ramips: make the old dwc driver depend on v3.9 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37357
 2013-07-15 21:06:03 +00:00
John Crispin
072e1a254c ramips: add v3.10 kernel config files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37356
 2013-07-15 21:05:58 +00:00
John Crispin
cb6375c20a ramips: fix ehci/ohci OF binding 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37354
 2013-07-15 21:05:47 +00:00
John Crispin
12a099eb07 ramips: update dtsi files to work with dwc2 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37353
 2013-07-15 21:05:42 +00:00
John Crispin
e8ebcffd02 ramips: add a explicit reset to dwc2 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37352
 2013-07-15 21:05:36 +00:00
John Crispin
bd78f2b56e ramips: add a patch to make dwc2 work with boards that have an old bootloader 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37339
 2013-07-15 11:34:13 +00:00
John Crispin
a0de18807b ramips: add ralink v3.10 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37331
 2013-07-15 10:06:55 +00:00
John Crispin
f7cf157712 ramips: disable ill_acc driver by default 
The driver seems to be causoing boot rpoblems on some SoCs

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37314
 2013-07-14 18:01:00 +00:00
John Crispin
89c0392736 ralink: drop v3.8 support 
Signed-off-by: John Crispin <blogic@opewnrt.org>

SVN-Revision: 37311
 2013-07-14 18:00:34 +00:00
Hauke Mehrtens
e574f75d16 kernel: update to kernel 3.9.10 and refresh patches 
SVN-Revision: 37274
 2013-07-13 22:43:10 +00:00
John Crispin
099188695a ralink: vlan offloading is causing problems. disable it 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37203
 2013-07-08 16:34:52 +00:00
John Crispin
a6091a5c71 ralink: unbreak ralink i2c support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37202
 2013-07-08 09:01:57 +00:00
John Crispin
a154693bab ralink: add i2c-ralink kmod info 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37200
 2013-07-08 09:01:47 +00:00
John Crispin
2da37a713e ramips: fix RT-N13U gpio buttons 
https://dev.openwrt.org/ticket/13795

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37163
 2013-07-04 13:31:23 +00:00
Felix Fietkau
5986a18c16 ramips: update wlan firmware hotplug script for new eeprom size 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37112
 2013-06-30 21:03:48 +00:00
Jonas Gorski
0d9f760f27 kernel: update linux 3.9 to 3.9.8 
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
 2013-06-30 13:10:12 +00:00
John Crispin
6875316646 ramips: unbreak initramfs generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37080
 2013-06-29 08:41:03 +00:00
John Crispin
77b9fd52a6 ramips: fix ethernet driver 
make sure the driver does not crash under load

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37058
 2013-06-28 11:22:11 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images 
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
 2013-06-27 19:58:31 +00:00
John Crispin
36209234ab ramips: fix rt2x00 ethernet compile bug 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37043
 2013-06-27 16:45:40 +00:00
John Crispin
0d4e00c337 ramips: add missing symbols to rt288x config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37042
 2013-06-27 16:45:26 +00:00
John Crispin
1706c8d29a ramips: fix ethernet stability issue introduced by recent kernel upgrade 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37041
 2013-06-27 16:28:06 +00:00
John Crispin
5063f712a6 ramips: move ESW reset to preinit on RT305x/RT5350 
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.

Signed-off-by: Felix Kaechele <felix@fetzig.org>

SVN-Revision: 37027
 2013-06-24 12:39:28 +00:00
John Crispin
d3723f93c6 ramips: make rt3883 usb work properly 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37024
 2013-06-24 12:06:56 +00:00
John Crispin
dca18caa79 ramips: revert gpio regulator dts update 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37021
 2013-06-24 11:09:50 +00:00
John Crispin
55fb6f3a05 ralink: update patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37016
 2013-06-23 15:50:49 +00:00
John Crispin
67f5f188b1 base-files: input/button drivers get loaded before preinit by procd 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
 2013-06-21 16:53:47 +00:00
John Crispin
e6ef318802 base-files: diag does not need to insmod any drivers, procd already did it for us 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36999
 2013-06-21 16:53:43 +00:00
John Crispin
fc9532aeaa ramips: add HAME MPR-A2 support 
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

SVN-Revision: 36898
 2013-06-10 08:24:56 +00:00
John Crispin
30786d2dd0 ramips: add support for belkin F7C027 wemo/homeautomatisation plug 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 36897
 2013-06-10 08:24:50 +00:00
John Crispin
1756047518 ramips: set correct description for rt305x subtarget 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36775
 2013-05-30 15:59:56 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
 2013-05-26 16:02:31 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
 2013-05-12 21:41:55 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
 2013-05-08 08:53:53 +00:00
John Crispin
036fb79052 ramips: drop 3.7 support 
Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572
 2013-05-07 10:58:44 +00:00
John Crispin
16a17b318a ramips: properly setup the FEATURES variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36571
 2013-05-07 10:58:30 +00:00
John Crispin
bd6e12d904 ramips: fix memory detection rt5350 
Signed-off-by: Felix Kaechele <felix@fetzig.org>

SVN-Revision: 36568
 2013-05-06 18:23:56 +00:00
John Crispin
899120ddef ramips: enable dsp extensions for rt305x and rt3883 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36567
 2013-05-06 16:45:59 +00:00
John Crispin
849ff98669 ramips: fix fypo in ethernet driver rt288x, rt3883 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36565
 2013-05-06 16:45:43 +00:00
John Crispin
eddd7f5773 ramips: Update ARC Freestation profile 
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36564
 2013-05-06 16:45:35 +00:00
John Crispin
4f1ff28f08 ramips: Support setting active_low in devicetree gpio-export 
Support setting active_low in devicetree gpio-export.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36563
 2013-05-06 16:45:27 +00:00
John Crispin
6af3b6721b ralink: unbreak uart pinmux handling 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36562
 2013-05-06 16:45:20 +00:00
John Crispin
7c04b3bd66 ramips: fix gpio base numbering 
make banks 0 based to unbreak userland ABI

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36561
 2013-05-06 16:45:12 +00:00
John Crispin
338ff04cab ramips: add gpio base properties to dtsi files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36560
 2013-05-06 16:45:04 +00:00
John Crispin
65760ede8b ramips: unbreak rt2880 support 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36559
 2013-05-06 16:44:56 +00:00
John Crispin
28bdb9efe9 ramips: fix DIR-602D1 flash size 
Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36558
 2013-05-06 16:44:47 +00:00
John Crispin
1c89a60431 ramips: unbreak gpio handling for uart mux group 
this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36543
 2013-05-04 11:36:51 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
John Crispin
eff12a630d ramips: move dlink profile to correct sub folder - 2nd try 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36489
 2013-04-30 10:34:20 +00:00
John Crispin
1db4587bc7 ramips: move dlink profile to correct sub folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36487
 2013-04-30 08:24:26 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Gabor Juhos
c63bb1a18e ramips: rt3883: fix build error 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36451
 2013-04-26 16:55:28 +00:00
John Crispin
e141b73f9d ramips: remove now unneeded user-space board detection 
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36436
 2013-04-25 19:03:05 +00:00
John Crispin
cf3885eb0f ramips: introduce DTS for ALL5003 
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435
 2013-04-25 19:03:01 +00:00
John Crispin
978567a89e ramips: set preinit interface to eth0 by default. 
This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36434
 2013-04-25 19:02:57 +00:00
John Crispin
7bfab6e308 ramips: Add Alpha ASL-26555 support. 
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
 2013-04-25 19:02:53 +00:00
John Crispin
c7216d0cab ramips: Add support of D-link DIR-620D1 
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
 2013-04-25 19:02:48 +00:00
John Crispin
deb3635923 ramips: sync kernel patches with the mips-next tree 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36431
 2013-04-25 19:02:42 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
 2013-04-19 08:07:34 +00:00
John Crispin
e3003ea2a9 fix prepare_generic_squashfs 
prepare_generic_squashfs was called twice on the generated images breaking mount_root

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36349
 2013-04-17 11:54:09 +00:00
John Crispin
8001e6a689 fix rt305x gpio 
https://dev.openwrt.org/ticket/13359

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36343
 2013-04-16 06:58:18 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
 2013-04-14 09:25:53 +00:00
John Crispin
d3a46c4b7f update rt2880 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36327
 2013-04-12 18:57:01 +00:00
John Crispin
92259c4803 fix up the rt2880 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36326
 2013-04-12 18:56:53 +00:00
John Crispin
a6424245e6 fix RT-N15 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36325
 2013-04-12 18:56:44 +00:00
John Crispin
7af1fa46ad update rt2880.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36324
 2013-04-12 18:56:36 +00:00
John Crispin
fb47fd0d6b unbreak portmapping - typo fix 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36293
 2013-04-09 14:39:01 +00:00
John Crispin
bc7b310959 move memory detect node to dtsi files 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
 2013-04-09 14:19:36 +00:00
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version) 
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
 2013-04-09 14:19:33 +00:00
John Crispin
e468abcae0 remove bootargs from dts 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
 2013-04-09 14:19:28 +00:00
John Crispin
82c3b7ce26 add ofpart info to the devicetrees 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
 2013-04-09 14:19:24 +00:00
John Crispin
f1e9d30ffc add sample swconfig portmap 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
 2013-04-09 14:19:20 +00:00
John Crispin
fcd962cc71 set of_node before registring the switch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36285
 2013-04-09 14:19:17 +00:00
Gabor Juhos
130f67210a ramips: TEW-691GR.dts fixes 
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
 2013-04-08 12:34:17 +00:00
Gabor Juhos
a4a148f222 ramips: rt3883: enable the AR8216 driver 
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36275
 2013-04-08 12:34:15 +00:00
Gabor Juhos
a9d977b2af ramips: add profile for the Omnima EMB-HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36274
 2013-04-08 11:12:04 +00:00
Gabor Juhos
82705b30b3 ramips: OMNI-EMB-HPM.dts fixes 
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
 2013-04-08 11:12:03 +00:00
Gabor Juhos
909fabe574 ramips: add mdio-bus node to rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
 2013-04-08 11:12:02 +00:00
Gabor Juhos
78ee80f2e8 ramips: fix MDIO/PHY handling 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36271
 2013-04-08 11:12:01 +00:00
Gabor Juhos
30e5bae84a ramips: fix console speed for OMNI-EMB-HPM 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
 2013-04-08 08:24:51 +00:00
Gabor Juhos
cd7ce5226d ramips: avoid invalid pointer dereference in pinmux code 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36269
 2013-04-08 08:24:50 +00:00
Gabor Juhos
4c85227cf4 ramips: TEW-692GR.dts fixes 
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
 2013-04-08 07:11:35 +00:00
Gabor Juhos
97635d7a8e ramips: add PCI node into RTN56U.dts 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
 2013-04-07 20:56:22 +00:00
Gabor Juhos
474264f64c ramips: add PCI node for rt3883.dtsi 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
 2013-04-07 20:56:21 +00:00
Gabor Juhos
6c8951313c ramips: rt3883: enable PCI support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36262
 2013-04-07 20:56:20 +00:00
Gabor Juhos
b6b0a8fbee ramips: fix RT3883 PCI driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36261
 2013-04-07 20:56:18 +00:00
Gabor Juhos
1700bf5b2e ramips: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36260
 2013-04-07 17:05:05 +00:00
Gabor Juhos
6de8743e44 ramips: add missing cpu-feature-override.h files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36259
 2013-04-07 17:05:04 +00:00
Gabor Juhos
68875710fd ramips: fix broken patch name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36258
 2013-04-07 16:26:27 +00:00
Gabor Juhos
16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
 2013-04-07 16:24:33 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
 2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
 2013-04-07 14:46:10 +00:00
Gabor Juhos
66fbe78a93 ramips: pinmux fixes 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
 2013-04-07 14:46:09 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
 2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
 2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files 
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
 2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
 2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches 
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
 2013-04-07 11:37:15 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files 
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
 2013-04-07 08:19:10 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts 
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
 2013-04-06 17:19:35 +00:00
Gabor Juhos
1ef39b43dd ramips: remove spi node from RTN56.dts 
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
 2013-04-06 12:37:40 +00:00
Gabor Juhos
d57e662cda ramips: fix ethernet switch node in RTN56U.dts 
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
 2013-04-06 12:37:38 +00:00
Gabor Juhos
4becd8590c ramips: rt3883: enable the RTL8367 driver 
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
 2013-04-06 12:37:37 +00:00
Gabor Juhos
348640f4b3 ramips: rt3883: sync 3.8 config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
 2013-04-06 12:37:31 +00:00
John Crispin
d16de0b69f fix typo pinmmux -> pinmux 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
 2013-04-06 11:46:34 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
 2013-04-06 11:40:44 +00:00
John Crispin
df7af06f1f fix dir-615 h1 network config 
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
 2013-04-05 23:37:45 +00:00
John Crispin
e1a74d8ff7 fix typo that made gpiomuxing fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
 2013-04-05 23:10:42 +00:00
John Crispin
93899a1329 add profile for tenda w150m board 
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
 2013-04-03 10:00:21 +00:00
John Crispin
7e54357bd5 fix ALL5002 default package selection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
 2013-04-03 10:00:16 +00:00
John Crispin
37401dca92 Build WW factory image for DAP-1350 
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
 2013-04-03 10:00:12 +00:00
John Crispin
910b705155 add Huawei D105 
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
 2013-04-03 10:00:08 +00:00
John Crispin
c1710901c5 add profile for the Edimax 3g-6200NL board 
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
 2013-04-03 10:00:03 +00:00
John Crispin
f3643374c4 there is no ttyS1 console 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
 2013-04-03 09:59:59 +00:00
John Crispin
99e0ff1123 make v3.8 the default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
 2013-04-03 09:59:55 +00:00
John Crispin
c8d5f5e0ef add new image/Makefile 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
 2013-04-03 09:59:51 +00:00
John Crispin
770b28f146 add the dts files that describe the boards in future 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
 2013-04-03 09:59:46 +00:00
John Crispin
2328e8389e fix upvel profile names 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
 2013-04-03 09:59:41 +00:00
John Crispin
94972a5268 fix rt3883 config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
 2013-04-03 09:59:37 +00:00
John Crispin
0716ae8abe fix rt305x config-3.8 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
 2013-04-03 09:59:33 +00:00
John Crispin
dce4945972 mark rt288x broken until the test hardware arrives in the mail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
 2013-04-03 09:59:16 +00:00
John Crispin
46f141637c add patches for v3.8 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
 2013-04-03 09:59:10 +00:00
John Crispin
4f86ea43ca remove old ralink 3.8 patches 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
 2013-04-03 09:58:48 +00:00
John Crispin
d4db00205d move files to files-3.7 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
 2013-04-03 09:58:44 +00:00
John Crispin
86a691144b add feature gpio 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
 2013-04-03 09:58:37 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3 
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
 2013-03-15 14:39:51 +00:00
John Crispin
b22cbac68f make sure errors get sent to /dev/null 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35988
 2013-03-12 13:52:40 +00:00
Gabor Juhos
fe3df4b593 ramips: add profile and build image for the Upvel UR-326N4G board 
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35972
 2013-03-11 21:02:45 +00:00
Gabor Juhos
d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board 
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
 2013-03-11 21:02:43 +00:00
Gabor Juhos
3c2ef04a0e ramips: add kernel support for the Upvel UR-326N4G board 
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
 2013-03-11 21:02:40 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
 2013-03-03 13:57:40 +00:00
Gabor Juhos
8798c73860 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension 
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35853
 2013-03-03 12:47:31 +00:00
Gabor Juhos
59ad675ef1 ramips: add user-space detection for ALL5002/ALL5003 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35852
 2013-03-03 12:47:28 +00:00
Gabor Juhos
50e51e5ecc ramips: indicate support for ALL5003 
add ALL5003 to board description in mach-all5002.c
adapt detection in user-space accordingly
(no functional changes)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35851
 2013-03-03 12:47:25 +00:00
Gabor Juhos
367ab0a40f ramips: enhance user-space board detection 
Similar to ar71xx, detect only once and cache the strings in
/tmp/sysinfo/model and /tmp/sysinfo/boardname.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35850
 2013-03-03 12:47:02 +00:00
Gabor Juhos
1ba2272ca5 ramips: fix whitespace in /lib/ramips.sh 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35849
 2013-03-03 12:46:08 +00:00
Gabor Juhos
5412b6f32e ramips: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35801
 2013-02-25 21:28:42 +00:00
Gabor Juhos
a08646642e ramips: image: don't break make process if mkimage command fails 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35800
 2013-02-25 21:28:40 +00:00
Gabor Juhos
275db5b4c4 ramips: remove port_power_off field from ehci_platform_data 
It is removed in 3.8. Also add a revert patch for 3.7.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35799
 2013-02-25 21:28:38 +00:00
Gabor Juhos
5e1d6ce077 ramips: remove __dev_{init,exit} annotations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35798
 2013-02-25 21:28:34 +00:00
Jonas Gorski
1cd62d06ca ramips: print image build warnings/errors to stderr 
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35721
 2013-02-21 11:45:33 +00:00
Gabor Juhos
90011a99f3 ramips: migrate to common led helper functions 
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35652
 2013-02-18 09:56:29 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
 2013-02-17 21:32:42 +00:00
Gabor Juhos
4375dae6d3 ramips: fix kmod-usb2 package name 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35628
 2013-02-16 17:26:52 +00:00
Gabor Juhos
7fd8525853 ramips: use the new macaddr_* helpers instead of maccalc 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35615
 2013-02-16 11:50:25 +00:00
Gabor Juhos
753d713e92 ramips: use the mtd_get_mac_* helpers 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35613
 2013-02-16 11:50:21 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos
9ed81a91f3 ramips: build image for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
 2013-02-02 17:21:06 +00:00
Gabor Juhos
813aec6796 ramips: add user-space support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
 2013-02-02 17:21:05 +00:00
Gabor Juhos
d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
 2013-02-02 17:21:01 +00:00
Gabor Juhos
b99b2ff553 ramips: add userspace support for the Edimax BR-6425 
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
 2013-02-02 17:01:50 +00:00
Gabor Juhos
0a42e38bad ramips: add kernel support for the Edimax BR-6425 board 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
 2013-02-02 17:01:47 +00:00
Gabor Juhos
fb2e2a56d7 refresh kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
 2013-02-01 17:28:40 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
 2013-01-29 18:29:45 +00:00
John Crispin
756a7c5451 fix for non-blinking LAN LEDs 
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
 2013-01-28 18:06:31 +00:00
John Crispin
d93706154b ramips: reset switch on single-port devices 
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
 2013-01-28 17:44:41 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
 2013-01-24 17:08:37 +00:00
Gabor Juhos
ed6d399f8d ramips: add profile and build image for the Tenda 3G300M 
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
 2013-01-19 17:05:07 +00:00
Gabor Juhos
9891603eb5 ramips: add user-space support for the Tenda 3G300M 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
 2013-01-19 17:05:06 +00:00
Gabor Juhos
7eff5d2df0 ramips: add kernel support for the Tenda 3G300M 
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
 2013-01-19 17:05:03 +00:00
Gabor Juhos
f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
 2013-01-19 15:36:13 +00:00
Gabor Juhos
6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros 
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
 2013-01-19 15:36:11 +00:00
Gabor Juhos
60dde219d4 ramips: do not stop the build if some targets fail 
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
 2013-01-19 08:51:45 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution 
SVN-Revision: 35217
 2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
 2013-01-18 11:44:42 +00:00
Felix Fietkau
576aa2af0c ramips: enable BR6425N in kernel config 
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
 2013-01-17 09:39:44 +00:00
Gabor Juhos
ff2ce330a5 ramips: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
 2013-01-12 12:25:30 +00:00
Gabor Juhos
d53f8c3ded ramips: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
 2013-01-12 12:25:28 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N 
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
 2013-01-06 11:11:42 +00:00
John Crispin
569bbe4970 rt5350 switch support fix 
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
 2013-01-02 11:28:21 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
 2012-12-30 08:23:48 +00:00
Gabor Juhos
6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
 2012-12-29 17:50:40 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
 2012-12-29 17:50:38 +00:00
Gabor Juhos
d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
 2012-12-29 17:50:35 +00:00
Gabor Juhos
76537041eb ramips: build image for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
 2012-12-29 17:50:34 +00:00
Gabor Juhos
3aad9b4c9b ramips: add user-space support for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
 2012-12-29 17:50:32 +00:00
Gabor Juhos
3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
 2012-12-29 17:50:28 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Gabor Juhos
69da894432 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
 2012-12-24 06:52:41 +00:00
Gabor Juhos
c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
 2012-12-24 06:52:38 +00:00
Gabor Juhos
8105c6badd ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
 2012-12-22 16:09:03 +00:00
Gabor Juhos
c81b4475c9 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
 2012-12-22 13:50:47 +00:00
Gabor Juhos
b44cdcde8e ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
 2012-12-22 12:11:13 +00:00
Gabor Juhos
b81667cb23 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
 2012-12-22 12:11:08 +00:00
Gabor Juhos
e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform. 
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
 2012-12-20 19:17:17 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
fe8efb72ca ramips: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
 2012-12-17 22:28:11 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
John Crispin
c2ae0ec02a add support for Hauppauge Broadway 
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
 2012-12-10 14:13:01 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos
e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2 
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
 2012-12-02 14:16:12 +00:00
Gabor Juhos
44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
 2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
 2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router 
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
 2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug 
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
 2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support 
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
 2012-11-25 14:25:27 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
 2012-11-20 07:19:10 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;) 
SVN-Revision: 34179
 2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
 2012-11-12 21:35:01 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
 2012-10-26 18:53:44 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
 2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
 2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
 2012-10-18 07:23:12 +00:00
Gabor Juhos
25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
 2012-10-18 07:23:11 +00:00
Gabor Juhos
462a53c367 ramips: add profile and build image for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
 2012-10-18 07:23:10 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
 2012-10-18 07:23:07 +00:00
Gabor Juhos
7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
 2012-10-18 07:23:06 +00:00
Gabor Juhos
bf9ae9432b ramips: add profile and build image for the DIR-645 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
 2012-10-18 07:23:04 +00:00