KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ralink: drop 3.10 support

Browse source 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42481
This commit is contained in:
John Crispin 2014-09-12 06:50:46 +00:00
parent e2864e9990
commit 17cf9c4593
87 changed files with 0 additions and 66599 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

180
target/linux/ramips/mt7620a/config-3.10
View file

@ -1,180 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
# CONFIG_CLKEVT_RT3352 is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_MT7620A_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_ICPLUS_PHY=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INET_LRO=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_INTC=y
CONFIG_IRQ_WORK=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND_MT7620=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_GSW_MT7620=y
CONFIG_NET_RALINK_MDIO=y
CONFIG_NLS=m
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_SAMSUNG_USBPHY is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB=m
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_COMMON=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

171
target/linux/ramips/mt7620n/config-3.10
View file

@ -1,171 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
# CONFIG_CLKEVT_RT3352 is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_MT7620A_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
# CONFIG_MTD_NAND_MT7620 is not set
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_GSW_MT7620=y
CONFIG_NET_RALINK_MDIO=y
CONFIG_NLS=m
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PCI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
CONFIG_RALINK_GDMA=y
CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_SAMSUNG_USBPHY is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB=m
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_COMMON=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

238
target/linux/ramips/mt7621/config-3.10
View file

@ -1,238 +0,0 @@
# CONFIG_32B_DESC is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_BOARD_SCACHE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_CEVT_GIC is not set
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_MT7621_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ESW_DOUBLE_VLAN_TAG=y
# CONFIG_GE1_MII_AN is not set
# CONFIG_GE1_MII_FORCE_100 is not set
# CONFIG_GE1_RGMII_AN is not set
CONFIG_GE1_RGMII_FORCE_1000=y
# CONFIG_GE1_RGMII_NONE is not set
# CONFIG_GE1_RVMII_FORCE_100 is not set
# CONFIG_GE1_TRGMII_FORCE_1200 is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_MT7621 is not set
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_GIC=y
CONFIG_IRQ_WORK=y
# CONFIG_LAN_WAN_SUPPORT is not set
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
CONFIG_MIPS_CMP=y
CONFIG_MIPS_CPU_SCACHE=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=6
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT=y
# CONFIG_MIPS_MT_DISABLED is not set
CONFIG_MIPS_MT_FPAFF=y
CONFIG_MIPS_MT_SMP=y
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_ASIC=y
# CONFIG_MT7621_WDT is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
# CONFIG_NET_RALINK is not set
CONFIG_NLS=m
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_NR_CPUS=4
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PDMA_NEW=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RAETH=y
CONFIG_RAETH_CHECKSUM_OFFLOAD=y
# CONFIG_RAETH_GMAC2 is not set
# CONFIG_RAETH_HW_VLAN_RX is not set
# CONFIG_RAETH_HW_VLAN_TX is not set
# CONFIG_RAETH_LRO is not set
# CONFIG_RAETH_NAPI is not set
# CONFIG_RAETH_QDMA is not set
CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y
# CONFIG_RAETH_SKB_RECYCLE_2K is not set
# CONFIG_RAETH_SPECIAL_TAG is not set
# CONFIG_RAETH_TSO is not set
CONFIG_RALINK=y
CONFIG_RALINK_MT7621=y
CONFIG_RALINK_USBPHY=y
# CONFIG_RALINK_WDT is not set
CONFIG_RA_NAT_NONE=y
# CONFIG_RA_NETWORK_TASKLET_BH is not set
CONFIG_RA_NETWORK_WORKQUEUE_BH=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RT_3052_ESW=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_SAMSUNG_USBPHY is not set
CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SMP=y
CONFIG_SMP_UP=y
# CONFIG_SOC_MT7620 is not set
CONFIG_SOC_MT7621=y
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_STOP_MACHINE=y
CONFIG_SWCONFIG=y
CONFIG_SYNC_R4K=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS_CMP=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TREE_RCU=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB=m
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_COMMON=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_MT7621_XHCI_PLATFORM=y
CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_USE_OF=y
CONFIG_WAN_AT_P0=y
# CONFIG_WAN_AT_P4 is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_WEAK_ORDERING=y
CONFIG_XPS=y
CONFIG_ZONE_DMA_FLAG=0

39
target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
View file

@ -1,39 +0,0 @@
From d11f6e47eb748f27ba325bd843cc88bae3ad0e8a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 29 Jan 2013 21:11:55 +0100
Subject: [PATCH 01/25] MTD: m25p80: allow loading mtd name from OF
In accordance with the physmap flash we should honour the linux,mtd-name
property when deciding what name the mtd device has.
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/devices/m25p80.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -927,10 +927,13 @@ static int m25p_probe(struct spi_device
unsigned i;
struct mtd_part_parser_data ppdata;
struct device_node __maybe_unused *np = spi->dev.of_node;
+ const char __maybe_unused *of_mtd_name = NULL;
#ifdef CONFIG_MTD_OF_PARTS
if (!of_device_is_available(np))
return -ENODEV;
+ of_property_read_string(spi->dev.of_node,
+ "linux,mtd-name", &of_mtd_name);
#endif
/* Platform data helps sort out which chip type we have, as
@@ -1006,6 +1009,8 @@ static int m25p_probe(struct spi_device
if (data && data->name)
flash->mtd.name = data->name;
+ else if (of_mtd_name)
+ flash->mtd.name = of_mtd_name;
else
flash->mtd.name = dev_name(&spi->dev);

105
target/linux/ramips/patches-3.10/0002-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
View file

@ -1,105 +0,0 @@
From 080f1a0c539180a88066fb004a8c31eefdf74161 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Aug 2013 18:47:27 +0200
Subject: [PATCH 02/25] reset: Fix compile when reset RESET_CONTROLLER is not
selected
Drivers need to protect their reset api calls with #ifdef to avoid compile
errors.
This patch adds dummy wrappers in the same way that linux/of.h does it.
Cc: linux-kernel@vger.kernel.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Gabor Juhos <juhosg@openwrt.org>
---
include/linux/reset-controller.h | 16 ++++++++++++++
include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++
2 files changed, 59 insertions(+)
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -45,7 +45,23 @@ struct reset_controller_dev {
unsigned int nr_resets;
};
+#if defined(CONFIG_RESET_CONTROLLER)
+
int reset_controller_register(struct reset_controller_dev *rcdev);
void reset_controller_unregister(struct reset_controller_dev *rcdev);
+#else
+
+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
+{
+ return -ENOSYS;
+}
+
+void reset_controller_unregister(struct reset_controller_dev *rcdev)
+{
+
+}
+
+#endif
+
#endif
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -1,9 +1,13 @@
#ifndef _LINUX_RESET_H_
#define _LINUX_RESET_H_
+#include <linux/err.h>
+
struct device;
struct reset_control;
+#if defined(CONFIG_RESET_CONTROLLER)
+
int reset_control_reset(struct reset_control *rstc);
int reset_control_assert(struct reset_control *rstc);
int reset_control_deassert(struct reset_control *rstc);
@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control
int device_reset(struct device *dev);
+#else /* CONFIG_RESET_CONTROLLER */
+
+static inline int reset_control_reset(struct reset_control *rstc)
+{
+ return -ENOSYS;
+}
+
+static inline int reset_control_assert(struct reset_control *rstc)
+{
+ return -ENOSYS;
+}
+
+static inline int reset_control_deassert(struct reset_control *rstc)
+{
+ return -ENOSYS;
+}
+
+static inline struct reset_control *reset_control_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void reset_control_put(struct reset_control *rstc)
+{
+
+}
+
+static inline struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline int device_reset(struct device *dev)
+{
+ return -ENOSYS;
+}
+
+#endif
+
#endif

39
target/linux/ramips/patches-3.10/0003-DT-Add-documentation-for-rt2880-wdt.patch
View file

@ -1,39 +0,0 @@
From 8b87087423057f8a06423702f3035634d6e8cd73 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 19:57:20 +0200
Subject: [PATCH 03/25] DT: Add documentation for rt2880-wdt
This document describes the binding of the watchdog core found ralink wireless
SoC.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
---
.../devicetree/bindings/watchdog/rt2880-wdt.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
@@ -0,0 +1,19 @@
+Ralink Watchdog Timers
+
+Required properties :
+- compatible: must be "ralink,rt2880-wdt"
+- reg: physical base address of the controller and length of the register range
+
+Optional properties :
+- interrupt-parent: phandle to the INTC device node
+- interrupts: Specify the INTC interrupt number
+
+Example:
+
+ watchdog@120 {
+ compatible = "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };

254
target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch
View file

@ -1,254 +0,0 @@
From 78046b68c1fc757162e32c83f59c3a94e794bf2e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:51:58 +0200
Subject: [PATCH 04/25] watchdog: MIPS: add ralink watchdog driver
Add a driver for the watchdog timer found on Ralink SoC
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
---
drivers/watchdog/Kconfig | 7 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rt2880_wdt.c | 208 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 216 insertions(+)
create mode 100644 drivers/watchdog/rt2880_wdt.c
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1113,6 +1113,13 @@ config LANTIQ_WDT
help
Hardware driver for the Lantiq SoC Watchdog Timer.
+config RALINK_WDT
+ tristate "Ralink SoC watchdog"
+ select WATCHDOG_CORE
+ depends on RALINK
+ help
+ Hardware driver for the Ralink SoC Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -135,6 +135,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
# PARISC Architecture
--- /dev/null
+++ b/drivers/watchdog/rt2880_wdt.c
@@ -0,0 +1,208 @@
+/*
+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * This driver was based on: drivers/watchdog/softdog.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSC_RSTSTAT 0x38
+#define WDT_RST_CAUSE BIT(1)
+
+#define RALINK_WDT_TIMEOUT 30
+#define RALINK_WDT_PRESCALE 65536
+
+#define TIMER_REG_TMR1LOAD 0x00
+#define TIMER_REG_TMR1CTL 0x08
+
+#define TMRSTAT_TMR1RST BIT(5)
+
+#define TMR1CTL_ENABLE BIT(7)
+#define TMR1CTL_MODE_SHIFT 4
+#define TMR1CTL_MODE_MASK 0x3
+#define TMR1CTL_MODE_FREE_RUNNING 0x0
+#define TMR1CTL_MODE_PERIODIC 0x1
+#define TMR1CTL_MODE_TIMEOUT 0x2
+#define TMR1CTL_MODE_WDT 0x3
+#define TMR1CTL_PRESCALE_MASK 0xf
+#define TMR1CTL_PRESCALE_65536 0xf
+
+static struct clk *rt288x_wdt_clk;
+static unsigned long rt288x_wdt_freq;
+static void __iomem *rt288x_wdt_base;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline void rt_wdt_w32(unsigned reg, u32 val)
+{
+ iowrite32(val, rt288x_wdt_base + reg);
+}
+
+static inline u32 rt_wdt_r32(unsigned reg)
+{
+ return ioread32(rt288x_wdt_base + reg);
+}
+
+static int rt288x_wdt_ping(struct watchdog_device *w)
+{
+ rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
+
+ return 0;
+}
+
+static int rt288x_wdt_start(struct watchdog_device *w)
+{
+ u32 t;
+
+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+ t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
+ TMR1CTL_PRESCALE_MASK);
+ t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
+ TMR1CTL_PRESCALE_65536);
+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+ rt288x_wdt_ping(w);
+
+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+ t |= TMR1CTL_ENABLE;
+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+ return 0;
+}
+
+static int rt288x_wdt_stop(struct watchdog_device *w)
+{
+ u32 t;
+
+ rt288x_wdt_ping(w);
+
+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+ t &= ~TMR1CTL_ENABLE;
+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+ return 0;
+}
+
+static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
+{
+ w->timeout = t;
+ rt288x_wdt_ping(w);
+
+ return 0;
+}
+
+static int rt288x_wdt_bootcause(void)
+{
+ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
+ return WDIOF_CARDRESET;
+
+ return 0;
+}
+
+static struct watchdog_info rt288x_wdt_info = {
+ .identity = "Ralink Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static struct watchdog_ops rt288x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = rt288x_wdt_start,
+ .stop = rt288x_wdt_stop,
+ .ping = rt288x_wdt_ping,
+ .set_timeout = rt288x_wdt_set_timeout,
+};
+
+static struct watchdog_device rt288x_wdt_dev = {
+ .info = &rt288x_wdt_info,
+ .ops = &rt288x_wdt_ops,
+ .min_timeout = 1,
+};
+
+static int rt288x_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (IS_ERR(rt288x_wdt_base))
+ return PTR_ERR(rt288x_wdt_base);
+
+ rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(rt288x_wdt_clk))
+ return PTR_ERR(rt288x_wdt_clk);
+
+ device_reset(&pdev->dev);
+
+ rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
+
+ rt288x_wdt_dev.dev = &pdev->dev;
+ rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
+
+ rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
+ rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout;
+
+ watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
+
+ ret = watchdog_register_device(&rt288x_wdt_dev);
+ if (!ret)
+ dev_info(&pdev->dev, "Initialized\n");
+
+ return 0;
+}
+
+static int rt288x_wdt_remove(struct platform_device *pdev)
+{
+ watchdog_unregister_device(&rt288x_wdt_dev);
+
+ return 0;
+}
+
+static void rt288x_wdt_shutdown(struct platform_device *pdev)
+{
+ rt288x_wdt_stop(&rt288x_wdt_dev);
+}
+
+static const struct of_device_id rt288x_wdt_match[] = {
+ { .compatible = "ralink,rt2880-wdt" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
+
+static struct platform_driver rt288x_wdt_driver = {
+ .probe = rt288x_wdt_probe,
+ .remove = rt288x_wdt_remove,
+ .shutdown = rt288x_wdt_shutdown,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = rt288x_wdt_match,
+ },
+};
+
+module_platform_driver(rt288x_wdt_driver);
+
+MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

59
target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
View file

@ -1,59 +0,0 @@
From ad68c2865b360f1b637432b4cbcaaf101d2687b9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 19:45:30 +0200
Subject: [PATCH 05/25] DT: Add documentation for gpio-ralink
Describe gpio-ralink binding.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
---
.../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
@@ -0,0 +1,40 @@
+Ralink SoC GPIO controller bindings
+
+Required properties:
+- compatible:
+ - "ralink,rt2880-gpio" for Ralink controllers
+- #gpio-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller
+- reg : Physical base address and length of the controller's registers
+- interrupt-parent: phandle to the INTC device node
+- interrupts : Specify the INTC interrupt number
+- ralink,num-gpios : Specify the number of GPIOs
+- ralink,register-map : The register layout depends on the GPIO bank and actual
+ SoC type. Register offsets need to be in this order.
+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
+
+Optional properties:
+- ralink,gpio-base : Specify the GPIO chips base number
+
+Example:
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ reg = <0x600 0x34>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ };

431
target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
View file

@ -1,431 +0,0 @@
From 55833373cf527dc94bc6c63b68d0f39591667a5d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 14:00:25 +0200
Subject: [PATCH 06/25] GPIO: MIPS: ralink: add gpio driver for ralink SoC
Add gpio driver for Ralink SoC. This driver makes the gpio core on
RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-gpio@vger.kernel.org
---
arch/mips/Kconfig | 1 +
arch/mips/include/asm/mach-ralink/gpio.h | 24 +++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ralink.c | 337 ++++++++++++++++++++++++++++++
5 files changed, 369 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -444,6 +444,7 @@ config RALINK
select SYS_HAS_EARLY_PRINTK
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
+ select ARCH_REQUIRE_GPIOLIB
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * Ralink SoC GPIO API support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_MACH_RALINK_GPIO_H
+#define __ASM_MACH_RALINK_GPIO_H
+
+#define ARCH_NR_GPIOS 128
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -209,6 +209,12 @@ config GPIO_RCAR
help
Say yes here to support GPIO on Renesas R-Car SoCs.
+config GPIO_RALINK
+ bool "Ralink GPIO Support"
+ depends on RALINK
+ help
+ Say yes here to support the Ralink SoC GPIO device
+
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,345 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+
+enum ralink_gpio_reg {
+ GPIO_REG_INT = 0,
+ GPIO_REG_EDGE,
+ GPIO_REG_RENA,
+ GPIO_REG_FENA,
+ GPIO_REG_DATA,
+ GPIO_REG_DIR,
+ GPIO_REG_POL,
+ GPIO_REG_SET,
+ GPIO_REG_RESET,
+ GPIO_REG_TOGGLE,
+ GPIO_REG_MAX
+};
+
+struct ralink_gpio_chip {
+ struct gpio_chip chip;
+ u8 regs[GPIO_REG_MAX];
+
+ spinlock_t lock;
+ void __iomem *membase;
+ struct irq_domain *domain;
+ int irq;
+
+ u32 rising;
+ u32 falling;
+};
+
+#define MAP_MAX 4
+static struct irq_domain *irq_map[MAP_MAX];
+static int irq_map_count;
+static atomic_t irq_refcount = ATOMIC_INIT(0);
+
+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
+{
+ struct ralink_gpio_chip *rg;
+
+ rg = container_of(chip, struct ralink_gpio_chip, chip);
+
+ return rg;
+}
+
+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
+{
+ iowrite32(val, rg->membase + rg->regs[reg]);
+}
+
+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
+{
+ return ioread32(rg->membase + rg->regs[reg]);
+}
+
+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+
+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
+}
+
+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+
+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
+}
+
+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
+ t &= ~BIT(offset);
+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int ralink_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ ralink_gpio_set(chip, offset, value);
+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
+ t |= BIT(offset);
+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+
+ if (rg->irq < 1)
+ return -1;
+
+ return irq_create_mapping(rg->domain, pin);
+}
+
+static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int i;
+
+ for (i = 0; i < irq_map_count; i++) {
+ struct irq_domain *domain = irq_map[i];
+ struct ralink_gpio_chip *rg;
+ unsigned long pending;
+ int bit;
+
+ rg = (struct ralink_gpio_chip *) domain->host_data;
+ pending = rt_gpio_r32(rg, GPIO_REG_INT);
+
+ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
+ u32 map = irq_find_mapping(domain, bit);
+ generic_handle_irq(map);
+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
+ }
+ }
+}
+
+static void ralink_gpio_irq_unmask(struct irq_data *d)
+{
+ struct ralink_gpio_chip *rg;
+ unsigned long flags;
+ u32 val;
+
+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
+ val = rt_gpio_r32(rg, GPIO_REG_RENA);
+
+ spin_lock_irqsave(&rg->lock, flags);
+ rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising));
+ rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling));
+ spin_unlock_irqrestore(&rg->lock, flags);
+}
+
+static void ralink_gpio_irq_mask(struct irq_data *d)
+{
+ struct ralink_gpio_chip *rg;
+ unsigned long flags;
+ u32 val;
+
+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
+ val = rt_gpio_r32(rg, GPIO_REG_RENA);
+
+ spin_lock_irqsave(&rg->lock, flags);
+ rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq));
+ rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq));
+ spin_unlock_irqrestore(&rg->lock, flags);
+}
+
+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct ralink_gpio_chip *rg;
+ u32 mask = BIT(d->hwirq);
+
+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
+
+ if (type == IRQ_TYPE_PROBE) {
+ if ((rg->rising | rg->falling) & mask)
+ return 0;
+
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ rg->rising |= mask;
+ else
+ rg->rising &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ rg->falling |= mask;
+ else
+ rg->falling &= ~mask;
+
+ return 0;
+}
+
+static struct irq_chip ralink_gpio_irq_chip = {
+ .name = "GPIO",
+ .irq_unmask = ralink_gpio_irq_unmask,
+ .irq_mask = ralink_gpio_irq_mask,
+ .irq_mask_ack = ralink_gpio_irq_mask,
+ .irq_set_type = ralink_gpio_irq_type,
+};
+
+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
+ irq_set_handler_data(irq, d);
+
+ return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = gpio_map,
+};
+
+static void ralink_gpio_irq_init(struct device_node *np,
+ struct ralink_gpio_chip *rg)
+{
+ if (irq_map_count >= MAP_MAX)
+ return;
+
+ rg->irq = irq_of_parse_and_map(np, 0);
+ if (!rg->irq)
+ return;
+
+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
+ &irq_domain_ops, rg);
+ if (!rg->domain) {
+ dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
+ return;
+ }
+
+ irq_map[irq_map_count++] = rg->domain;
+
+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
+
+ if (!atomic_read(&irq_refcount))
+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
+ atomic_inc(&irq_refcount);
+
+ dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
+}
+
+static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ return pinctrl_request_gpio(gpio);
+}
+
+static int ralink_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct ralink_gpio_chip *rg;
+ const __be32 *ngpio, *gpiobase;
+
+ if (!res) {
+ dev_err(&pdev->dev, "failed to find resource\n");
+ return -ENOMEM;
+ }
+
+ rg = devm_kzalloc(&pdev->dev,
+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
+ if (!rg)
+ return -ENOMEM;
+
+ rg->membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!rg->membase) {
+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u8_array(np, "ralink,register-map",
+ rg->regs, GPIO_REG_MAX)) {
+ dev_err(&pdev->dev, "failed to read register definition\n");
+ return -EINVAL;
+ }
+
+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
+ if (!ngpio) {
+ dev_err(&pdev->dev, "failed to read number of pins\n");
+ return -EINVAL;
+ }
+
+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
+ if (gpiobase)
+ rg->chip.base = be32_to_cpu(*gpiobase);
+ else
+ rg->chip.base = -1;
+
+ spin_lock_init(&rg->lock);
+
+ rg->chip.dev = &pdev->dev;
+ rg->chip.label = dev_name(&pdev->dev);
+ rg->chip.of_node = np;
+ rg->chip.ngpio = be32_to_cpu(*ngpio);
+ rg->chip.direction_input = ralink_gpio_direction_input;
+ rg->chip.direction_output = ralink_gpio_direction_output;
+ rg->chip.get = ralink_gpio_get;
+ rg->chip.set = ralink_gpio_set;
+ rg->chip.request = ralink_gpio_request;
+ rg->chip.to_irq = ralink_gpio_to_irq;
+
+ /* set polarity to low for all lines */
+ rt_gpio_w32(rg, GPIO_REG_POL, 0);
+
+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
+
+ ralink_gpio_irq_init(np, rg);
+
+ return gpiochip_add(&rg->chip);
+}
+
+static const struct of_device_id ralink_gpio_match[] = {
+ { .compatible = "ralink,rt2880-gpio" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
+
+static struct platform_driver ralink_gpio_driver = {
+ .probe = ralink_gpio_probe,
+ .driver = {
+ .name = "rt2880_gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = ralink_gpio_match,
+ },
+};
+
+static int __init ralink_gpio_init(void)
+{
+ return platform_driver_register(&ralink_gpio_driver);
+}
+
+subsys_initcall(ralink_gpio_init);

126
target/linux/ramips/patches-3.10/0009-MIPS-ralink-add-support-for-reset-controller-API.patch
View file

@ -1,126 +0,0 @@
From 4e694014a11a407e309f62c7daade545ba71dcf1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:54:22 +0200
Subject: [PATCH 09/25] MIPS: ralink: add support for reset-controller API
Add a helper for reseting different devices on the SoC.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/Kconfig | 1 +
arch/mips/ralink/common.h | 2 ++
arch/mips/ralink/of.c | 3 +++
arch/mips/ralink/reset.c | 62 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 68 insertions(+)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -374,6 +374,7 @@ config MACH_VR41XX
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_RESET_CONTROLLER
config NXP_STB220
bool "NXP STB220 board"
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -46,6 +46,8 @@ extern void ralink_of_remap(void);
extern void ralink_clk_init(void);
extern void ralink_clk_add(const char *dev, unsigned long rate);
+extern void ralink_rst_init(void);
+
extern void prom_soc_init(struct ralink_soc_info *soc_info);
__iomem void *plat_of_remap_node(const char *node);
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -110,6 +110,9 @@ static int __init plat_of_setup(void)
if (of_platform_populate(NULL, of_ids, NULL, NULL))
panic("failed to populate DT\n");
+ /* make sure ithat the reset controller is setup early */
+ ralink_rst_init();
+
return 0;
}
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -10,6 +10,8 @@
#include <linux/pm.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/reset-controller.h>
#include <asm/reboot.h>
@@ -19,6 +21,66 @@
#define SYSC_REG_RESET_CTRL 0x034
#define RSTCTL_RESET_SYSTEM BIT(0)
+static int ralink_assert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ u32 val;
+
+ if (id < 8)
+ return -1;
+
+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+ val |= BIT(id);
+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+ return 0;
+}
+
+static int ralink_deassert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ u32 val;
+
+ if (id < 8)
+ return -1;
+
+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+ val &= ~BIT(id);
+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+ return 0;
+}
+
+static int ralink_reset_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ ralink_assert_device(rcdev, id);
+ return ralink_deassert_device(rcdev, id);
+}
+
+static struct reset_control_ops reset_ops = {
+ .reset = ralink_reset_device,
+ .assert = ralink_assert_device,
+ .deassert = ralink_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+ .ops = &reset_ops,
+ .owner = THIS_MODULE,
+ .nr_resets = 32,
+ .of_reset_n_cells = 1,
+};
+
+void ralink_rst_init(void)
+{
+ reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+ "ralink,rt2880-reset");
+ if (!reset_dev.of_node)
+ pr_err("Failed to find reset controller node");
+ else
+ reset_controller_register(&reset_dev);
+}
+
static void ralink_restart(char *command)
{
local_irq_disable();

213
target/linux/ramips/patches-3.10/0010-MIPS-ralink-add-support-for-periodic-timer-irq.patch
View file

@ -1,213 +0,0 @@
From 1cd8a1dc8e942bd130dc40ff801f37ad296495e3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:41:04 +0200
Subject: [PATCH 10/25] MIPS: ralink: add support for periodic timer irq
Adds a driver for the periodic timer found on Ralink SoC.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Makefile | 2 +-
arch/mips/ralink/timer.c | 185 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 186 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/ralink/timer.c
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,7 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-obj-y := prom.o of.o reset.o clk.o irq.o
+obj-y := prom.o of.o reset.o clk.o irq.o timer.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
--- /dev/null
+++ b/arch/mips/ralink/timer.c
@@ -0,0 +1,185 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define TIMER_REG_TMRSTAT 0x00
+#define TIMER_REG_TMR0LOAD 0x10
+#define TIMER_REG_TMR0CTL 0x18
+
+#define TMRSTAT_TMR0INT BIT(0)
+
+#define TMR0CTL_ENABLE BIT(7)
+#define TMR0CTL_MODE_PERIODIC BIT(4)
+#define TMR0CTL_PRESCALER 1
+#define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
+#define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
+
+struct rt_timer {
+ struct device *dev;
+ void __iomem *membase;
+ int irq;
+ unsigned long timer_freq;
+ unsigned long timer_div;
+};
+
+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+{
+ __raw_writel(val, rt->membase + reg);
+}
+
+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+{
+ return __raw_readl(rt->membase + reg);
+}
+
+static irqreturn_t rt_timer_irq(int irq, void *_rt)
+{
+ struct rt_timer *rt = (struct rt_timer *) _rt;
+
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+ rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+
+ return IRQ_HANDLED;
+}
+
+
+static int rt_timer_request(struct rt_timer *rt)
+{
+ int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
+ dev_name(rt->dev), rt);
+ if (err) {
+ dev_err(rt->dev, "failed to request irq\n");
+ } else {
+ u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+ }
+ return err;
+}
+
+static void rt_timer_free(struct rt_timer *rt)
+{
+ free_irq(rt->irq, rt);
+}
+
+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+{
+ if (rt->timer_freq < divisor)
+ rt->timer_div = rt->timer_freq;
+ else
+ rt->timer_div = divisor;
+
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+ return 0;
+}
+
+static int rt_timer_enable(struct rt_timer *rt)
+{
+ u32 t;
+
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+ t |= TMR0CTL_ENABLE;
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+
+ return 0;
+}
+
+static void rt_timer_disable(struct rt_timer *rt)
+{
+ u32 t;
+
+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+ t &= ~TMR0CTL_ENABLE;
+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+}
+
+static int rt_timer_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct rt_timer *rt;
+ struct clk *clk;
+
+ rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
+ if (!rt) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ rt->irq = platform_get_irq(pdev, 0);
+ if (!rt->irq) {
+ dev_err(&pdev->dev, "failed to load irq\n");
+ return -ENOENT;
+ }
+
+ rt->membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (IS_ERR(rt->membase))
+ return PTR_ERR(rt->membase);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed get clock rate\n");
+ return PTR_ERR(clk);
+ }
+
+ rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
+ if (!rt->timer_freq)
+ return -EINVAL;
+
+ rt->dev = &pdev->dev;
+ platform_set_drvdata(pdev, rt);
+
+ rt_timer_request(rt);
+ rt_timer_config(rt, 2);
+ rt_timer_enable(rt);
+
+ dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
+
+ return 0;
+}
+
+static int rt_timer_remove(struct platform_device *pdev)
+{
+ struct rt_timer *rt = platform_get_drvdata(pdev);
+
+ rt_timer_disable(rt);
+ rt_timer_free(rt);
+
+ return 0;
+}
+
+static const struct of_device_id rt_timer_match[] = {
+ { .compatible = "ralink,rt2880-timer" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt_timer_match);
+
+static struct platform_driver rt_timer_driver = {
+ .probe = rt_timer_probe,
+ .remove = rt_timer_remove,
+ .driver = {
+ .name = "rt-timer",
+ .owner = THIS_MODULE,
+ .of_match_table = rt_timer_match
+ },
+};
+
+module_platform_driver(rt_timer_driver);
+
+MODULE_DESCRIPTION("Ralink RT2880 timer");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL");

192
target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch
View file

@ -1,192 +0,0 @@
From 3b511d972b556712f89ccc68825c0ec8f398dc5c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:46:09 +0200
Subject: [PATCH 11/25] MIPS: ralink: add support for systick timer found on
newer ralink SoC
Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent
of the SoC master clock. If we want to automatic frequency scaling to work we
need to use the systick timer as the clock source.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Kconfig | 7 ++
arch/mips/ralink/Makefile | 2 +
arch/mips/ralink/cevt-rt3352.c | 145 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 154 insertions(+)
create mode 100644 arch/mips/ralink/cevt-rt3352.c
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -1,5 +1,12 @@
if RALINK
+config CLKEVT_RT3352
+ bool "Systick Clockevent source"
+ depends on SOC_RT305X || SOC_MT7620
+ default y
+ select CLKSRC_OF
+ select CLKSRC_MMIO
+
choice
prompt "Ralink SoC selection"
default SOC_RT305X
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,6 +8,8 @@
obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
--- /dev/null
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -0,0 +1,145 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSTICK_FREQ (50 * 1000)
+
+#define SYSTICK_CONFIG 0x00
+#define SYSTICK_COMPARE 0x04
+#define SYSTICK_COUNT 0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN 0x2
+/* enable the counter */
+#define CFG_CNT_EN 0x1
+
+struct systick_device {
+ void __iomem *membase;
+ struct clock_event_device dev;
+ int irq_requested;
+ int freq_scale;
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ struct systick_device *sdev;
+ u32 count;
+
+ sdev = container_of(evt, struct systick_device, dev);
+ count = ioread32(sdev->membase + SYSTICK_COUNT);
+ count = (count + delta) % SYSTICK_FREQ;
+ iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+
+ return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+ /* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *dev = (struct clock_event_device *) dev_id;
+
+ dev->event_handler(dev);
+
+ return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+ .dev = {
+ /*
+ * cevt-r4k uses 300, make sure systick
+ * gets used if available
+ */
+ .rating = 310,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = systick_next_event,
+ .set_mode = systick_set_clock_mode,
+ .event_handler = systick_event_handler,
+ },
+};
+
+static struct irqaction systick_irqaction = {
+ .handler = systick_interrupt,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+ .dev_id = &systick.dev,
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct systick_device *sdev;
+
+ sdev = container_of(evt, struct systick_device, dev);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ if (!sdev->irq_requested)
+ setup_irq(systick.dev.irq, &systick_irqaction);
+ sdev->irq_requested = 1;
+ iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+ systick.membase + SYSTICK_CONFIG);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ if (sdev->irq_requested)
+ free_irq(systick.dev.irq, &systick_irqaction);
+ sdev->irq_requested = 0;
+ iowrite32(0, systick.membase + SYSTICK_CONFIG);
+ break;
+
+ default:
+ pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
+ break;
+ }
+}
+
+static void __init ralink_systick_init(struct device_node *np)
+{
+ systick.membase = of_iomap(np, 0);
+ if (!systick.membase)
+ return;
+
+ systick_irqaction.name = np->name;
+ systick.dev.name = np->name;
+ clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+ systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+ systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+ systick.dev.irq = irq_of_parse_and_map(np, 0);
+ if (!systick.dev.irq) {
+ pr_err("%s: request_irq failed", np->name);
+ return;
+ }
+
+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+ SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
+
+ clockevents_register_device(&systick.dev);
+
+ pr_info("%s: runing - mult: %d, shift: %d\n",
+ np->name, systick.dev.mult, systick.dev.shift);
+}
+
+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);

21
target/linux/ramips/patches-3.10/0012-MIPS-ralink-probe-clocksources-from-OF.patch
View file

@ -1,21 +0,0 @@
From c4d6a957efb0c8d919302598ae547bde05137461 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:48:39 +0200
Subject: [PATCH 12/25] MIPS: ralink: probe clocksources from OF
Make plat_time_init() call clocksource_of_init() allowing the systick cevt
to load.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/clk.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -69,4 +69,5 @@ void __init plat_time_init(void)
pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
mips_hpt_frequency = clk_get_rate(clk) / 2;
clk_put(clk);
+ clocksource_of_init();
}

34
target/linux/ramips/patches-3.10/0013-MIPS-ralink-mt7620-add-verbose-ram-info.patch
View file

@ -1,34 +0,0 @@
From 2d17c793a9cd3f67351d1a15c099ef2464e81f47 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 20 May 2013 20:30:11 +0200
Subject: [PATCH 13/25] MIPS: ralink: mt7620: add verbose ram info
Make the code print which of SDRAM, DDR1 or DDR2 was detected.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/mt7620.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_inf
switch (dram_type) {
case SYSCFG0_DRAM_TYPE_SDRAM:
+ pr_info("Board has SDRAM\n");
soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
break;
case SYSCFG0_DRAM_TYPE_DDR1:
+ pr_info("Board has DDR1\n");
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
break;
case SYSCFG0_DRAM_TYPE_DDR2:
+ pr_info("Board has DDR2\n");
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
break;

22
target/linux/ramips/patches-3.10/0014-MIPS-ralink-mt7620-add-spi-clock-definition.patch
View file

@ -1,22 +0,0 @@
From d0da9f08ef37e9f639e3b7995d722684da2410a2 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 23 May 2013 18:46:25 +0200
Subject: [PATCH 14/25] MIPS: ralink: mt7620: add spi clock definition
The definition of the spi clock is missing.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/mt7620.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -167,6 +167,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000100.timer", 40000000);
ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
}

22
target/linux/ramips/patches-3.10/0015-MIPS-ralink-mt7620-add-wdt-clock-definition.patch
View file

@ -1,22 +0,0 @@
From 51db62f58431d9a89c55f59f98879829dcfddcaf Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 13:50:11 +0200
Subject: [PATCH 15/25] MIPS: ralink: mt7620: add wdt clock definition
The definition of the wdt clock is missing.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/mt7620.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -166,6 +166,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000100.timer", 40000000);
+ ralink_clk_add("10000120.watchdog", 40000000);
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);

63
target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
View file

@ -1,63 +0,0 @@
From 011f4bdba0dd4d1dff6d33b1a65541fc4f09c78e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 24 May 2013 21:28:08 +0200
Subject: [PATCH 16/25] MIPS: ralink: mt7620: fix usb issue during frequency
scaling
If the USB HCD is running and the cpu is scaled too low, then the USB stops
working. Increase the idle speed of the core to fix this if the kernel is
built with USB support.
The values are taken from the Ralink SDK Kernel.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
2 files changed, 20 insertions(+)
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -20,6 +20,7 @@
#define SYSC_REG_CHIP_REV 0x0c
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -20,6 +20,12 @@
#include "common.h"
+/* clock scaling */
+#define CLKCFG_FDIV_MASK 0x1f00
+#define CLKCFG_FDIV_USB_VAL 0x0300
+#define CLKCFG_FFRAC_MASK 0x001f
+#define CLKCFG_FFRAC_USB_VAL 0x0003
+
/* does the board have sdram or ddram */
static int dram_type;
@@ -170,6 +176,19 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
+
+ if (IS_ENABLED(CONFIG_USB)) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be too low for
+ * USB to function properly
+ */
+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+ }
}
void __init ralink_of_remap(void)

23
target/linux/ramips/patches-3.10/0017-MIPS-ralink-mt7620-this-SoC-has-ehci-and-ohci-hosts.patch
View file

@ -1,23 +0,0 @@
From c16c0b66594cb0be44e150dbe3fda747817b873d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 17:50:53 +0200
Subject: [PATCH 17/25] MIPS: ralink: mt7620: this SoC has ehci and ohci hosts
Select the the EHCI and OHCI symbols.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -29,6 +29,8 @@ choice
config SOC_MT7620
bool "MT7620"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
endchoice

44
target/linux/ramips/patches-3.10/0018-DT-Add-documentation-for-spi-rt2880.patch
View file

@ -1,44 +0,0 @@
From c464a54f9a4a959d09206583b11ae99740e0f267 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Aug 2013 20:12:59 +0200
Subject: [PATCH 18/25] DT: Add documentation for spi-rt2880
Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
@@ -0,0 +1,28 @@
+Ralink SoC RT2880 SPI master controller.
+
+This SPI controller is found on most wireless SoCs made by ralink.
+
+Required properties:
+- compatible : "ralink,rt2880-spi"
+- reg : The register base for the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@b00 {
+ compatible = "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+

476
target/linux/ramips/patches-3.10/0019-SPI-ralink-add-Ralink-SoC-spi-driver.patch
View file

@ -1,476 +0,0 @@
From 43c36279a0e822de608c1e825826bbac3238d8a2 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 22 Apr 2013 23:16:18 +0200
Subject: [PATCH 19/25] SPI: ralink: add Ralink SoC spi driver
Add the driver needed to make SPI work on Ralink SoC.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: John Crispin <blogic@openwrt.org>
---
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-rt2880.c | 450 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 457 insertions(+)
create mode 100644 drivers/spi/spi-rt2880.c
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -354,6 +354,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI blocks.
+config SPI_RT2880
+ tristate "Ralink RT288x SPI Controller"
+ depends on RALINK
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,432 @@
+/*
+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
+ *
+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts are based on spi-orion.c:
+ * Author: Shadi Ammouri <shadi@marvell.com>
+ * Copyright (C) 2007-2008 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "spi-rt2880"
+/* only one slave is supported*/
+#define RALINK_NUM_CHIPSELECTS 1
+/* in usec */
+#define RALINK_SPI_WAIT_MAX_LOOP 2000
+
+#define RAMIPS_SPI_STAT 0x00
+#define RAMIPS_SPI_CFG 0x10
+#define RAMIPS_SPI_CTL 0x14
+#define RAMIPS_SPI_DATA 0x20
+#define RAMIPS_SPI_FIFO_STAT 0x38
+
+/* SPISTAT register bit field */
+#define SPISTAT_BUSY BIT(0)
+
+/* SPICFG register bit field */
+#define SPICFG_LSBFIRST 0
+#define SPICFG_MSBFIRST BIT(8)
+#define SPICFG_SPICLKPOL BIT(6)
+#define SPICFG_RXCLKEDGE_FALLING BIT(5)
+#define SPICFG_TXCLKEDGE_FALLING BIT(4)
+#define SPICFG_SPICLK_PRESCALE_MASK 0x7
+#define SPICFG_SPICLK_DIV2 0
+#define SPICFG_SPICLK_DIV4 1
+#define SPICFG_SPICLK_DIV8 2
+#define SPICFG_SPICLK_DIV16 3
+#define SPICFG_SPICLK_DIV32 4
+#define SPICFG_SPICLK_DIV64 5
+#define SPICFG_SPICLK_DIV128 6
+#define SPICFG_SPICLK_DISABLE 7
+
+/* SPICTL register bit field */
+#define SPICTL_HIZSDO BIT(3)
+#define SPICTL_STARTWR BIT(2)
+#define SPICTL_STARTRD BIT(1)
+#define SPICTL_SPIENA BIT(0)
+
+/* SPIFIFOSTAT register bit field */
+#define SPIFIFOSTAT_TXFULL BIT(17)
+
+struct rt2880_spi {
+ struct spi_master *master;
+ void __iomem *base;
+ unsigned int sys_freq;
+ unsigned int speed;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
+{
+ return spi_master_get_devdata(spi->master);
+}
+
+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
+{
+ return ioread32(rs->base + reg);
+}
+
+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, u32 val)
+{
+ iowrite32(val, rs->base + reg);
+}
+
+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
+{
+ void __iomem *addr = rs->base + reg;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&rs->lock, flags);
+ val = ioread32(addr);
+ val |= mask;
+ iowrite32(val, addr);
+ spin_unlock_irqrestore(&rs->lock, flags);
+}
+
+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
+{
+ void __iomem *addr = rs->base + reg;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&rs->lock, flags);
+ val = ioread32(addr);
+ val &= ~mask;
+ iowrite32(val, addr);
+ spin_unlock_irqrestore(&rs->lock, flags);
+}
+
+static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 rate;
+ u32 prescale;
+ u32 reg;
+
+ dev_dbg(&spi->dev, "speed:%u\n", speed);
+
+ /*
+ * the supported rates are: 2, 4, 8, ... 128
+ * round up as we look for equal or less speed
+ */
+ rate = DIV_ROUND_UP(rs->sys_freq, speed);
+ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
+ rate = roundup_pow_of_two(rate);
+ dev_dbg(&spi->dev, "rate-2:%u\n", rate);
+
+ /* check if requested speed is too small */
+ if (rate > 128)
+ return -EINVAL;
+
+ if (rate < 2)
+ rate = 2;
+
+ /* Convert the rate to SPI clock divisor value. */
+ prescale = ilog2(rate / 2);
+ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
+
+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
+ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
+ rs->speed = speed;
+ return 0;
+}
+
+/*
+ * called only when no transfer is active on the bus
+ */
+static int
+rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ unsigned int speed = spi->max_speed_hz;
+ int rc;
+
+ if ((t != NULL) && t->speed_hz)
+ speed = t->speed_hz;
+
+ if (rs->speed != speed) {
+ dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
+ rc = rt2880_spi_baudrate_set(spi, speed);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
+{
+ if (enable)
+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+ else
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+}
+
+static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
+{
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+ u32 status;
+
+ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
+ if ((status & SPISTAT_BUSY) == 0)
+ return 0;
+
+ cpu_relax();
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static unsigned int
+rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ unsigned count = 0;
+ u8 *rx = xfer->rx_buf;
+ const u8 *tx = xfer->tx_buf;
+ int err;
+
+ dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len,
+ (tx != NULL) ? "tx" : " ",
+ (rx != NULL) ? "rx" : " ");
+
+ if (tx) {
+ for (count = 0; count < xfer->len; count++) {
+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
+ err = rt2880_spi_wait_till_ready(rs);
+ if (err) {
+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
+ goto out;
+ }
+ }
+ }
+
+ if (rx) {
+ for (count = 0; count < xfer->len; count++) {
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
+ err = rt2880_spi_wait_till_ready(rs);
+ if (err) {
+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
+ goto out;
+ }
+ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
+ }
+ }
+
+out:
+ return count;
+}
+
+static int rt2880_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct rt2880_spi *rs = spi_master_get_devdata(master);
+ struct spi_device *spi = m->spi;
+ struct spi_transfer *t = NULL;
+ int par_override = 0;
+ int status = 0;
+ int cs_active = 0;
+
+ /* Load defaults */
+ status = rt2880_spi_setup_transfer(spi, NULL);
+ if (status < 0)
+ goto msg_done;
+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
+ dev_err(&spi->dev,
+ "message rejected: invalid transfer data buffers\n");
+ status = -EIO;
+ goto msg_done;
+ }
+
+ if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
+ dev_err(&spi->dev,
+ "message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
+ (rs->sys_freq / 128), t->speed_hz);
+ status = -EIO;
+ goto msg_done;
+ }
+
+ if (par_override || t->speed_hz || t->bits_per_word) {
+ par_override = 1;
+ status = rt2880_spi_setup_transfer(spi, t);
+ if (status < 0)
+ goto msg_done;
+ if (!t->speed_hz && !t->bits_per_word)
+ par_override = 0;
+ }
+
+ if (!cs_active) {
+ rt2880_spi_set_cs(rs, 1);
+ cs_active = 1;
+ }
+
+ if (t->len)
+ m->actual_length += rt2880_spi_write_read(spi, t);
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (t->cs_change) {
+ rt2880_spi_set_cs(rs, 0);
+ cs_active = 0;
+ }
+ }
+
+msg_done:
+ if (cs_active)
+ rt2880_spi_set_cs(rs, 0);
+
+ m->status = status;
+ spi_finalize_current_message(master);
+
+ return 0;
+}
+
+static int rt2880_spi_setup(struct spi_device *spi)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+
+ if ((spi->max_speed_hz == 0) ||
+ (spi->max_speed_hz > (rs->sys_freq / 2)))
+ spi->max_speed_hz = (rs->sys_freq / 2);
+
+ if (spi->max_speed_hz < (rs->sys_freq / 128)) {
+ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
+ spi->max_speed_hz);
+ return -EINVAL;
+ }
+
+ /*
+ * baudrate & width will be set rt2880_spi_setup_transfer
+ */
+ return 0;
+}
+
+static void rt2880_spi_reset(struct rt2880_spi *rs)
+{
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG,
+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
+}
+
+static int rt2880_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct rt2880_spi *rs;
+ unsigned long flags;
+ void __iomem *base;
+ struct resource *r;
+ int status = 0;
+ struct clk *clk;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
+ status);
+ return PTR_ERR(clk);
+ }
+
+ status = clk_prepare_enable(clk);
+ if (status)
+ return status;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
+ if (master == NULL) {
+ dev_dbg(&pdev->dev, "master allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* we support only mode 0, and no options */
+ master->mode_bits = 0;
+
+ master->setup = rt2880_spi_setup;
+ master->transfer_one_message = rt2880_spi_transfer_one_message;
+ master->num_chipselect = RALINK_NUM_CHIPSELECTS;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
+
+ dev_set_drvdata(&pdev->dev, master);
+
+ rs = spi_master_get_devdata(master);
+ rs->base = base;
+ rs->clk = clk;
+ rs->master = master;
+ rs->sys_freq = clk_get_rate(rs->clk);
+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
+ spin_lock_irqsave(&rs->lock, flags);
+
+ device_reset(&pdev->dev);
+
+ rt2880_spi_reset(rs);
+
+ return spi_register_master(master);
+}
+
+static int rt2880_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct rt2880_spi *rs;
+
+ master = dev_get_drvdata(&pdev->dev);
+ rs = spi_master_get_devdata(master);
+
+ clk_disable(rs->clk);
+ spi_unregister_master(master);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static const struct of_device_id rt2880_spi_match[] = {
+ { .compatible = "ralink,rt2880-spi" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+
+static struct platform_driver rt2880_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = rt2880_spi_match,
+ },
+ .probe = rt2880_spi_probe,
+ .remove = rt2880_spi_remove,
+};
+
+module_platform_driver(rt2880_spi_driver);
+
+MODULE_DESCRIPTION("Ralink SPI driver");
+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL");

629
target/linux/ramips/patches-3.10/0020-MIPS-ralink-update-dts-files.patch
View file

@ -1,629 +0,0 @@
From 5845a3aa53cf42893db05662aa9bb91387949ff6 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 12 Aug 2013 18:11:33 +0200
Subject: [PATCH 22/25] MIPS: ralink: update dts files
Add the devicetree nodes needed to make the newly merged drivers work.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/dts/mt7620a.dtsi | 135 +++++++++++++++++++++++
arch/mips/ralink/dts/rt3050.dtsi | 156 ++++++++++++++++++++++++++
arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++
3 files changed, 510 insertions(+)
--- a/arch/mips/ralink/dts/mt7620a.dtsi
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
@@ -29,10 +29,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,16 +65,129 @@
memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <32>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
+
+ systick@d00 {
+ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
+ reg = <0xd00 0x10>;
+
+ resets = <&rstctrl 28>;
+ reset-names = "intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <7>;
+ };
+ };
+
+ rstctrl: rstctrl {
+ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
};
};
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -9,6 +9,10 @@
};
};
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -29,10 +33,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,17 +69,144 @@
memc@300 {
compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <12>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
+
+ };
+
+ rstctrl: rstctrl {
+ compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ ethernet@10100000 {
+ compatible = "ralink,rt3050-eth";
+ reg = <0x10100000 10000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ esw@10110000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+
+ status = "disabled";
+ };
+
+ wmac@10180000 {
+ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
+ reg = <0x10180000 40000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
};
usb@101c0000 {
@@ -63,6 +216,9 @@
interrupt-parent = <&intc>;
interrupts = <18>;
+ resets = <&rstctrl 22>;
+ reset-names = "otg";
+
status = "disabled";
};
};
--- a/arch/mips/ralink/dts/rt3883.dtsi
+++ b/arch/mips/ralink/dts/rt3883.dtsi
@@ -29,10 +29,32 @@
reg = <0x0 0x100>;
};
+ timer@100 {
+ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
+ watchdog@120 {
+ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
+ reg = <0x120 0x10>;
+
+ resets = <&rstctrl 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+
intc: intc@200 {
compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "intc";
+
interrupt-controller;
#interrupt-cells = <1>;
@@ -43,16 +65,213 @@
memc@300 {
compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
+
+ resets = <&rstctrl 20>;
+ reset-names = "mc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+
+ uart@500 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0x500 0x100>;
+
+ resets = <&rstctrl 12>;
+ reset-names = "uart";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ resets = <&rstctrl 13>;
+ reset-names = "pio";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <0>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <24>;
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <40>;
+ ralink,num-gpios = <32>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ gpio3: gpio@688 {
+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+ reg = <0x688 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,gpio-base = <72>;
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi0: spi@b00 {
+ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ status = "disabled";
};
uartlite@c00 {
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
+ resets = <&rstctrl 19>;
+ reset-names = "uartl";
+
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
};
};
+
+ rstctrl: rstctrl {
+ compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ status = "disabled";
+
+ ralink,pci-slot = <1>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ralink,pci-slot = <17>;
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ralink,pci-slot = <18>;
+
+ status = "disabled";
+ };
+ };
+ };
};

95
target/linux/ramips/patches-3.10/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
View file

@ -1,95 +0,0 @@
From f6dc5d40c766e5ff9b18b93a1b6f7a576655f9c4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 16:26:41 +0200
Subject: [PATCH 21/25] MIPS: ralink: add cpu frequency scaling
This feature will break udelay() and cause the delay loop to have longer delays
when the frequency is scaled causing a performance hit.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -29,6 +29,10 @@
/* enable the counter */
#define CFG_CNT_EN 0x1
+/* mt7620 frequency scaling defines */
+#define CLK_LUT_CFG 0x40
+#define SLEEP_EN BIT(31)
+
struct systick_device {
void __iomem *membase;
struct clock_event_device dev;
@@ -36,6 +40,8 @@ struct systick_device {
int freq_scale;
};
+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
+
static void systick_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
@@ -87,6 +93,21 @@ static struct irqaction systick_irqactio
.dev_id = &systick.dev,
};
+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
+{
+ if (sdev->freq_scale == status)
+ return;
+
+ sdev->freq_scale = status;
+
+ pr_info("%s: %s autosleep mode\n", systick.dev.name,
+ (status) ? ("enable") : ("disable"));
+ if (status)
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
+ else
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
+}
+
static void systick_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
sdev->irq_requested = 1;
iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
systick.membase + SYSTICK_CONFIG);
+ if (systick_freq_scaling)
+ systick_freq_scaling(sdev, 1);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
+ if (systick_freq_scaling)
+ systick_freq_scaling(sdev, 0);
if (sdev->irq_requested)
free_irq(systick.dev.irq, &systick_irqaction);
sdev->irq_requested = 0;
@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
}
}
+static const struct of_device_id systick_match[] = {
+ { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
+ {},
+};
+
static void __init ralink_systick_init(struct device_node *np)
{
+ const struct of_device_id *match;
+
systick.membase = of_iomap(np, 0);
if (!systick.membase)
return;
+ match = of_match_node(systick_match, np);
+ if (match)
+ systick_freq_scaling = match->data;
+
systick_irqaction.name = np->name;
systick.dev.name = np->name;
clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);

901
target/linux/ramips/patches-3.10/0022-MIPS-add-driver-for-the-built-in-PCI-controller-of-the-RT3883-SoC.patch
View file

@ -1,901 +0,0 @@
From patchwork Fri Aug 23 12:03:20 2013
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [v3] MIPS: add driver for the built-in PCI controller of the RT3883
SoC
From: Gabor Juhos <juhosg@openwrt.org>
X-Patchwork-Id: 5758
Message-Id: <1377259400-21211-1-git-send-email-juhosg@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, Gabor Juhos <juhosg@openwrt.org>,
devicetree@vger.kernel.org
Date: Fri, 23 Aug 2013 14:03:20 +0200
The Ralink RT3883 SoCs have a built-in PCI Host Controller
device. The patch adds a platform driver and device tree
binding documentation for that.
The patch also enables the HW_HAS_PCI config option. This
is required in order to be able to enable the PCI support.
Cc: devicetree@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: John Crispin <blogic@openwrt.org>
---
Changes since v2:
- fix compiler warning:
CC arch/mips/pci/pci-rt3883.o
arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]
Changes since v1:
- change the 'status' property to optional in the binding doc
- add board specific example to the binding doc
rt3883-pci: fix-build-warning
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
.../devicetree/bindings/pci/ralink,rt3883-pci.txt | 190 ++++++
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-rt3883.c | 636 ++++++++++++++++++++
arch/mips/ralink/Kconfig | 1 +
4 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
create mode 100644 arch/mips/pci/pci-rt3883.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,190 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "ralink,rt3883-pci"
+
+ - reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 1.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 1.
+
+ - ranges: specifies the translation between child address space and parent
+ address space
+
+ Optional properties:
+
+ - status: indicates the operational status of the device.
+ Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+ The main node must have two child nodes which describes the built-in
+ interrupt controller and the PCI host bridge.
+
+ a) Interrupt controller:
+
+ Required properties:
+
+ - interrupt-controller: identifies the node as an interrupt controller
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0. As such, 'interrupt-map' nodes do not
+ have to specify a parent unit address.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ - interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+
+ b) PCI host bridge:
+
+ Required properties:
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - device_type: must be "pci"
+
+ - bus-range: PCI bus numbers covered
+
+ - ranges: specifies the ranges for the PCI memory and I/O regions
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ The PCI host bridge node migh have additional sub-nodes representing
+ the onboard PCI devices/PCI slots. Each such sub-node must have the
+ following mandatory properties:
+
+ - reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+
+ - device_type: must be "pci"
+
+ If a given sub-node represents a PCI bridge it must have following
+ mandatory properties as well:
+
+ - #address-cells: must be set to <3>
+
+ - #size-cells: must set to <2>
+
+ - #interrupt-cells: must be set to <1>
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ Besides the required properties the sub-nodes may have these optional
+ properties:
+
+ - status: indicates the operational status of the sub-node.
+ Value must be either "disabled" or "okay".
+
+3) Example:
+
+ a) SoC specific dtsi file:
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+ status = "disabled";
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+ };
+ };
+
+ b) Board specific dts file:
+
+ pci@10140000 {
+ status = "okay";
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+ };
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
--- /dev/null
+++ b/arch/mips/pci/pci-rt3883.c
@@ -0,0 +1,636 @@
+/*
+ * Ralink RT3662/RT3883 SoC PCI support
+ *
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT3883_MEMORY_BASE 0x00000000
+#define RT3883_MEMORY_SIZE 0x02000000
+
+#define RT3883_PCI_REG_PCICFG 0x00
+#define RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
+#define RT3883_PCICFG_P2P_BR_DEVNUM_S 16
+#define RT3883_PCICFG_PCIRST BIT(1)
+#define RT3883_PCI_REG_PCIRAW 0x04
+#define RT3883_PCI_REG_PCIINT 0x08
+#define RT3883_PCI_REG_PCIENA 0x0c
+
+#define RT3883_PCI_REG_CFGADDR 0x20
+#define RT3883_PCI_REG_CFGDATA 0x24
+#define RT3883_PCI_REG_MEMBASE 0x28
+#define RT3883_PCI_REG_IOBASE 0x2c
+#define RT3883_PCI_REG_ARBCTL 0x80
+
+#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000)
+#define RT3883_PCI_REG_BAR0SETUP(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10)
+#define RT3883_PCI_REG_IMBASEBAR0(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18)
+#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30)
+#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34)
+#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38)
+#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50)
+
+#define RT3883_PCI_MODE_NONE 0
+#define RT3883_PCI_MODE_PCI BIT(0)
+#define RT3883_PCI_MODE_PCIE BIT(1)
+#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
+
+#define RT3883_PCI_IRQ_COUNT 32
+
+#define RT3883_P2P_BR_DEVNUM 1
+
+struct rt3883_pci_controller {
+ void __iomem *base;
+ spinlock_t lock;
+
+ struct device_node *intc_of_node;
+ struct irq_domain *irq_domain;
+
+ struct pci_controller pci_controller;
+ struct resource io_res;
+ struct resource mem_res;
+
+ bool pcie_ready;
+};
+
+static inline struct rt3883_pci_controller *
+pci_bus_to_rt3883_controller(struct pci_bus *bus)
+{
+ struct pci_controller *hose;
+
+ hose = (struct pci_controller *) bus->sysdata;
+ return container_of(hose, struct rt3883_pci_controller, pci_controller);
+}
+
+static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
+ unsigned reg)
+{
+ return ioread32(rpc->base + reg);
+}
+
+static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
+ u32 val, unsigned reg)
+{
+ iowrite32(val, rpc->base + reg);
+}
+
+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+ unsigned int func, unsigned int where)
+{
+ return (bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+ 0x80000000;
+}
+
+static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
+ unsigned bus, unsigned slot,
+ unsigned func, unsigned reg)
+{
+ unsigned long flags;
+ u32 address;
+ u32 ret;
+
+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ return ret;
+}
+
+static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
+ unsigned bus, unsigned slot,
+ unsigned func, unsigned reg, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+
+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+}
+
+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 pending;
+
+ rpc = irq_get_handler_data(irq);
+
+ pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
+
+ while (pending) {
+ unsigned bit = __ffs(pending);
+
+ irq = irq_find_mapping(rpc->irq_domain, bit);
+ generic_handle_irq(irq);
+
+ pending &= ~BIT(bit);
+ }
+}
+
+static void rt3883_pci_irq_unmask(struct irq_data *d)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 t;
+
+ rpc = irq_data_get_irq_chip_data(d);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+ rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static void rt3883_pci_irq_mask(struct irq_data *d)
+{
+ struct rt3883_pci_controller *rpc;
+ u32 t;
+
+ rpc = irq_data_get_irq_chip_data(d);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+ rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static struct irq_chip rt3883_pci_irq_chip = {
+ .name = "RT3883 PCI",
+ .irq_mask = rt3883_pci_irq_mask,
+ .irq_unmask = rt3883_pci_irq_unmask,
+ .irq_mask_ack = rt3883_pci_irq_mask,
+};
+
+static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, d->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
+ .map = rt3883_pci_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int rt3883_pci_irq_init(struct device *dev,
+ struct rt3883_pci_controller *rpc)
+{
+ int irq;
+
+ irq = irq_of_parse_and_map(rpc->intc_of_node, 0);
+ if (irq == 0) {
+ dev_err(dev, "%s has no IRQ",
+ of_node_full_name(rpc->intc_of_node));
+ return -EINVAL;
+ }
+
+ /* disable all interrupts */
+ rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
+
+ rpc->irq_domain =
+ irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
+ &rt3883_pci_irq_domain_ops,
+ rpc);
+ if (!rpc->irq_domain) {
+ dev_err(dev, "unable to add IRQ domain\n");
+ return -ENODEV;
+ }
+
+ irq_set_handler_data(irq, rpc);
+ irq_set_chained_handler(irq, rt3883_pci_irq_handler);
+
+ return 0;
+}
+
+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct rt3883_pci_controller *rpc;
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ rpc = pci_bus_to_rt3883_controller(bus);
+
+ if (!rpc->pcie_ready && bus->number == 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct rt3883_pci_controller *rpc;
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ rpc = pci_bus_to_rt3883_controller(bus);
+
+ if (!rpc->pcie_ready && bus->number == 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rpc->lock, flags);
+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
+ spin_unlock_irqrestore(&rpc->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt3883_pci_ops = {
+ .read = rt3883_pci_config_read,
+ .write = rt3883_pci_config_write,
+};
+
+static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
+{
+ u32 syscfg1;
+ u32 rstctrl;
+ u32 clkcfg1;
+ u32 t;
+
+ rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+ syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+ clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ rstctrl |= RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+
+ /* setup PCI PAD drive mode */
+ syscfg1 &= ~(0x30);
+ syscfg1 |= (2 << 4);
+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t &= ~BIT(31);
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+ t &= 0x80ffffff;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+ t |= 0xa << 24;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t |= BIT(31);
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+ msleep(50);
+
+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+ }
+
+ syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
+
+ clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
+
+ if (mode & RT3883_PCI_MODE_PCI) {
+ clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
+ rstctrl &= ~RT3883_RSTCTRL_PCI;
+ }
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
+ }
+
+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+ rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
+
+ msleep(500);
+
+ /*
+ * setup the device number of the P2P bridge
+ * and de-assert the reset line
+ */
+ t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
+ rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
+
+ /* flush write */
+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
+ msleep(500);
+
+ if (mode & RT3883_PCI_MODE_PCIE) {
+ msleep(500);
+
+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
+
+ rpc->pcie_ready = t & BIT(0);
+
+ if (!rpc->pcie_ready) {
+ /* reset the PCIe block */
+ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+ t |= RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+ t &= ~RT3883_RSTCTRL_PCIE;
+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+
+ /* turn off PCIe clock */
+ t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+ t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
+ rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
+
+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ t &= ~0xf000c080;
+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+ }
+ }
+
+ /* enable PCI arbiter */
+ rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
+}
+
+static int rt3883_pci_probe(struct platform_device *pdev)
+{
+ struct rt3883_pci_controller *rpc;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ struct device_node *child;
+ u32 val;
+ int err;
+ int mode;
+
+ rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
+ if (!rpc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ rpc->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rpc->base))
+ return PTR_ERR(rpc->base);
+
+ /* find the interrupt controller child node */
+ for_each_child_of_node(np, child) {
+ if (of_get_property(child, "interrupt-controller", NULL) &&
+ of_node_get(child)) {
+ rpc->intc_of_node = child;
+ break;
+ }
+ }
+
+ if (!rpc->intc_of_node) {
+ dev_err(dev, "%s has no %s child node",
+ of_node_full_name(rpc->intc_of_node),
+ "interrupt controller");
+ return -EINVAL;
+ }
+
+ /* find the PCI host bridge child node */
+ for_each_child_of_node(np, child) {
+ if (child->type &&
+ of_node_cmp(child->type, "pci") == 0 &&
+ of_node_get(child)) {
+ rpc->pci_controller.of_node = child;
+ break;
+ }
+ }
+
+ if (!rpc->pci_controller.of_node) {
+ dev_err(dev, "%s has no %s child node",
+ of_node_full_name(rpc->intc_of_node),
+ "PCI host bridge");
+ err = -EINVAL;
+ goto err_put_intc_node;
+ }
+
+ mode = RT3883_PCI_MODE_NONE;
+ for_each_available_child_of_node(rpc->pci_controller.of_node, child) {
+ int devfn;
+
+ if (!child->type ||
+ of_node_cmp(child->type, "pci") != 0)
+ continue;
+
+ devfn = of_pci_get_devfn(child);
+ if (devfn < 0)
+ continue;
+
+ switch (PCI_SLOT(devfn)) {
+ case 1:
+ mode |= RT3883_PCI_MODE_PCIE;
+ break;
+
+ case 17:
+ case 18:
+ mode |= RT3883_PCI_MODE_PCI;
+ break;
+ }
+ }
+
+ if (mode == RT3883_PCI_MODE_NONE) {
+ dev_err(dev, "unable to determine PCI mode\n");
+ err = -EINVAL;
+ goto err_put_hb_node;
+ }
+
+ dev_info(dev, "mode:%s%s\n",
+ (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
+ (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
+
+ rt3883_pci_preinit(rpc, mode);
+
+ rpc->pci_controller.pci_ops = &rt3883_pci_ops;
+ rpc->pci_controller.io_resource = &rpc->io_res;
+ rpc->pci_controller.mem_resource = &rpc->mem_res;
+
+ /* Load PCI I/O and memory resources from DT */
+ pci_load_of_ranges(&rpc->pci_controller,
+ rpc->pci_controller.of_node);
+
+ rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
+ rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
+
+ ioport_resource.start = rpc->io_res.start;
+ ioport_resource.end = rpc->io_res.end;
+
+ /* PCI */
+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
+ rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
+
+ /* PCIe */
+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
+ rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
+
+ err = rt3883_pci_irq_init(dev, rpc);
+ if (err)
+ goto err_put_hb_node;
+
+ /* PCIe */
+ val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
+
+ /* PCI */
+ val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
+
+ if (mode == RT3883_PCI_MODE_PCIE) {
+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
+
+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_BASE_ADDRESS_0,
+ RT3883_MEMORY_BASE);
+ /* flush write */
+ rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_BASE_ADDRESS_0);
+ } else {
+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+ PCI_IO_BASE, 0x00000101);
+ }
+
+ register_pci_controller(&rpc->pci_controller);
+
+ return 0;
+
+err_put_hb_node:
+ of_node_put(rpc->pci_controller.of_node);
+err_put_intc_node:
+ of_node_put(rpc->intc_of_node);
+ return err;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct of_irq dev_irq;
+ int err;
+ int irq;
+
+ err = of_irq_map_pci(dev, &dev_irq);
+ if (err) {
+ pr_err("pci %s: unable to get irq map, err=%d\n",
+ pci_name((struct pci_dev *) dev), err);
+ return 0;
+ }
+
+ irq = irq_create_of_mapping(dev_irq.controller,
+ dev_irq.specifier,
+ dev_irq.size);
+
+ if (irq == 0)
+ pr_crit("pci %s: no irq found for pin %u\n",
+ pci_name((struct pci_dev *) dev), pin);
+ else
+ pr_info("pci %s: using irq %d for pin %u\n",
+ pci_name((struct pci_dev *) dev), irq, pin);
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id rt3883_pci_ids[] = {
+ { .compatible = "ralink,rt3883-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
+
+static struct platform_driver rt3883_pci_driver = {
+ .probe = rt3883_pci_probe,
+ .driver = {
+ .name = "rt3883-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rt3883_pci_ids),
+ },
+};
+
+static int __init rt3883_pci_init(void)
+{
+ return platform_driver_register(&rt3883_pci_driver);
+}
+
+postcore_initcall(rt3883_pci_init);
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -26,6 +26,7 @@ choice
bool "RT3883"
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
config SOC_MT7620
bool "MT7620"

80
target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
View file

@ -1,80 +0,0 @@
From 1be15a87eea5f26fb24b6aac332530cd3e2d984e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:08:11 +0200
Subject: [PATCH 100/133] MIPS: use set_mode() to enable/disable the cevt-r4k
irq
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/kernel/cevt-r4k.c | 39 ++++++++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 13 deletions(-)
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long
#endif /* CONFIG_MIPS_MT_SMTC */
-void mips_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- /* Nothing to do ... */
-}
-
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
int cp0_timer_irq_installed;
@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction =
.name = "timer",
};
+void mips_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ if (cp0_timer_irq_installed)
+ break;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(evt->irq, &c0_compare_irqaction);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ if (!cp0_timer_irq_installed)
+ break;
+
+ cp0_timer_irq_installed = 0;
+ free_irq(evt->irq, &c0_compare_irqaction);
+ break;
+
+ default:
+ pr_err("Unhandeled mips clock_mode\n");
+ break;
+ }
+#endif
+}
void mips_event_handler(struct clock_event_device *dev)
{
+
}
/*
@@ -215,12 +238,14 @@ int __cpuinit r4k_clockevent_init(void)
#endif
clockevents_register_device(cd);
+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
if (cp0_timer_irq_installed)
return 0;
cp0_timer_irq_installed = 1;
setup_irq(irq, &c0_compare_irqaction);
+#endif
return 0;
}

59
target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch
View file

@ -1,59 +0,0 @@
From 5689333e7e4396a827a2cb6fa1242159e9af56de Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 20 May 2013 20:57:09 +0200
Subject: [PATCH 101/133] MIPS: ralink: add verbose pmu info
Print the PMU and LDO settings on boot.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -26,6 +26,22 @@
#define CLKCFG_FFRAC_MASK 0x001f
#define CLKCFG_FFRAC_USB_VAL 0x0003
+/* analog */
+#define PMU0_CFG 0x88
+#define PMU_SW_SET BIT(28)
+#define A_DCDC_EN BIT(24)
+#define A_SSC_PERI BIT(19)
+#define A_SSC_GEN BIT(18)
+#define A_SSC_M 0x3
+#define A_SSC_S 16
+#define A_DLY_M 0x7
+#define A_DLY_S 8
+#define A_VTUNE_M 0xff
+
+/* digital */
+#define PMU1_CFG 0x8C
+#define DIG_SW_SEL BIT(25)
+
/* does the board have sdram or ddram */
static int dram_type;
@@ -208,6 +224,8 @@ void prom_soc_init(struct ralink_soc_inf
u32 n1;
u32 rev;
u32 cfg0;
+ u32 pmu0;
+ u32 pmu1;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
@@ -255,4 +273,12 @@ void prom_soc_init(struct ralink_soc_inf
BUG();
}
soc_info->mem_base = MT7620_DRAM_BASE;
+
+ pmu0 = __raw_readl(sysc + PMU0_CFG);
+ pmu1 = __raw_readl(sysc + PMU1_CFG);
+
+ pr_info("Analog PMU set to %s control\n",
+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
}

75
target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch
View file

@ -1,75 +0,0 @@
From 23d18a1b3d0a7e5faa08b6bece6692667c930975 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 21 May 2013 15:50:31 +0200
Subject: [PATCH 102/133] MIPS: ralink: adds a bootrom dumper module
This patch adds a trivial driver that allows userland to extract the bootrom of
a SoC via debugfs.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Makefile | 2 ++
arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
create mode 100644 arch/mips/ralink/bootrom.c
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -17,4 +17,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
+
obj-y += dts/
--- /dev/null
+++ b/arch/mips/ralink/bootrom.c
@@ -0,0 +1,48 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define BOOTROM_OFFSET 0x10118000
+#define BOOTROM_SIZE 0x8000
+
+static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
+
+static int bootrom_show(struct seq_file *s, void *unused)
+{
+ seq_write(s, membase, BOOTROM_SIZE);
+
+ return 0;
+}
+
+static int bootrom_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, bootrom_show, NULL);
+}
+
+static const struct file_operations bootrom_file_ops = {
+ .open = bootrom_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int bootrom_setup(void)
+{
+ if (!debugfs_create_file("bootrom", 0444,
+ NULL, NULL, &bootrom_file_ops)) {
+ pr_err("Failed to create bootrom debugfs file\n");
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+postcore_initcall(bootrom_setup);

113
target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch
View file

@ -1,113 +0,0 @@
From c5fe00f24f56b15f982dda355089986d57488b36 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 16 May 2013 23:28:23 +0200
Subject: [PATCH 103/133] MIPS: ralink: add illegal access driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Makefile | 2 +
arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
create mode 100644 arch/mips/ralink/ill_acc.c
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
--- /dev/null
+++ b/arch/mips/ralink/ill_acc.c
@@ -0,0 +1,87 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define REG_ILL_ACC_ADDR 0x10
+#define REG_ILL_ACC_TYPE 0x14
+
+#define ILL_INT_STATUS BIT(31)
+#define ILL_ACC_WRITE BIT(30)
+#define ILL_ACC_LEN_M 0xff
+#define ILL_ACC_OFF_M 0xf
+#define ILL_ACC_OFF_S 16
+#define ILL_ACC_ID_M 0x7
+#define ILL_ACC_ID_S 8
+
+#define DRV_NAME "ill_acc"
+
+static const char *ill_acc_ids[] = {
+ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
+};
+
+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
+{
+ struct device *dev = (struct device *) _priv;
+ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
+ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
+
+ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
+ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
+ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
+ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
+ type & ILL_ACC_LEN_M);
+
+ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+
+ return IRQ_HANDLED;
+}
+
+static int __init ill_acc_of_setup(void)
+{
+ struct platform_device *pdev;
+ struct device_node *np;
+ int irq;
+
+ /* somehow this driver breaks on RT5350 */
+ if (of_machine_is_compatible("ralink,rt5350-soc"))
+ return -EINVAL;
+
+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
+ if (!np)
+ return -EINVAL;
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_err("%s: failed to lookup pdev\n", np->name);
+ return -EINVAL;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ return -EINVAL;
+ }
+
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
+
+ dev_info(&pdev->dev, "irq registered\n");
+
+ return 0;
+}
+
+arch_initcall(ill_acc_of_setup);

24
target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch
View file

@ -1,24 +0,0 @@
From b83808826ac7a5c727f5314b5a3bf07fcd6ec929 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 23 May 2013 18:50:56 +0200
Subject: [PATCH 104/133] MIPS: ralink: workaround DTB memory issue
If the DTB is too big a bug happens on boot when init ram is freed.
This is a temporary fix until the real cause is found.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/of.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,7 +74,7 @@ void __init device_tree_init(void)
unflatten_device_tree();
/* free the space reserved for the dt blob */
- free_bootmem(base, size);
+ //free_bootmem(base, size);
}
void __init plat_mem_setup(void)

25
target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
View file

@ -1,25 +0,0 @@
From 6f72aea69951479b7daad1d38b506ede4f8a1676 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 04:38:07 +0000
Subject: [PATCH 105/133] MIPS: ralink: add missing clk_set_rate() to clk.c
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *c
}
EXPORT_SYMBOL_GPL(clk_get_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -1;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
void __init plat_time_init(void)
{
struct clk *clk;

66
target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch
View file

@ -1,66 +0,0 @@
From 45ba0675286e2a71f6a577833ab13b951bb7e31a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 04:40:02 +0000
Subject: [PATCH 106/133] MIPS: ralink: add support for MT7620n
This is the small version of MT7620a.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++-----
arch/mips/ralink/mt7620.c | 19 ++++++++++++-------
2 files changed, 14 insertions(+), 12 deletions(-)
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -24,11 +24,8 @@
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
-#define MT7620N_CHIP_NAME0 0x33365452
-#define MT7620N_CHIP_NAME1 0x20203235
-
-#define MT7620A_CHIP_NAME0 0x3637544d
-#define MT7620A_CHIP_NAME1 0x20203032
+#define MT7620_CHIP_NAME0 0x3637544d
+#define MT7620_CHIP_NAME1 0x20203032
#define CHIP_REV_PKG_MASK 0x1
#define CHIP_REV_PKG_SHIFT 16
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -226,22 +226,27 @@ void prom_soc_init(struct ralink_soc_inf
u32 cfg0;
u32 pmu0;
u32 pmu1;
+ u32 bga;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
+ if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+
+ if (bga) {
name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
} else {
- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+#ifdef CONFIG_PCI
+ panic("mt7620n is only supported for non pci kernels");
+#endif
}
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u",
name,

45
target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch
View file

@ -1,45 +0,0 @@
From ee46d05eefefb0fb40b5682b4f6f3876b496044b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 04:40:48 +0000
Subject: [PATCH 107/133] MIPS: ralink: allow manual memory override
RT5350 relies on the bootloader setting up the memc correctly.
On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range
.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/of.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -77,6 +77,17 @@ void __init device_tree_init(void)
//free_bootmem(base, size);
}
+static int memory_dtb;
+
+static int __init early_init_dt_find_memory(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ if (depth == 1 && !strcmp(uname, "memory@0"))
+ memory_dtb = 1;
+
+ return 0;
+}
+
void __init plat_mem_setup(void)
{
set_io_port_base(KSEG1);
@@ -87,7 +98,10 @@ void __init plat_mem_setup(void)
*/
__dt_setup_arch(&__dtb_start);
- if (soc_info.mem_size)
+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
+ if (memory_dtb)
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+ else if (soc_info.mem_size)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
BOOT_MEM_RAM);
else

26
target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch
View file

@ -1,26 +0,0 @@
From 1fe4d719d1c973c01f4b6a4c0de47bfac77e3eca Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 19 May 2013 00:42:23 +0200
Subject: [PATCH 108/133] MIPS: ralink: add rt_sysc_m32 helper
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned r
return __raw_readl(rt_sysc_membase + reg);
}
+static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
+{
+ u32 val = rt_sysc_r32(reg) & ~clr;
+
+ __raw_writel(val | set, rt_sysc_membase + reg);
+}
+
static inline void rt_memc_w32(u32 val, unsigned reg)
{
__raw_writel(val, rt_memc_membase + reg);

301
target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
View file

@ -1,301 +0,0 @@
From ca21f813087ca5a8b02ec00efcd9c3f3fbf3bc1f Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 24 Mar 2013 17:17:17 +0100
Subject: [PATCH 109/133] MIPS: ralink: add pseudo pwm led trigger based on
timer0
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 197 insertions(+), 16 deletions(-)
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -12,6 +12,8 @@
#include <linux/timer.h>
#include <linux/of_gpio.h>
#include <linux/clk.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
#include <asm/mach-ralink/ralink_regs.h>
@@ -23,16 +25,34 @@
#define TMR0CTL_ENABLE BIT(7)
#define TMR0CTL_MODE_PERIODIC BIT(4)
-#define TMR0CTL_PRESCALER 1
+#define TMR0CTL_PRESCALER 2
#define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
#define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
+struct rt_timer_gpio {
+ struct list_head list;
+ struct led_classdev *led;
+};
+
struct rt_timer {
- struct device *dev;
- void __iomem *membase;
- int irq;
- unsigned long timer_freq;
- unsigned long timer_div;
+ struct device *dev;
+ void __iomem *membase;
+ int irq;
+
+ unsigned long timer_freq;
+ unsigned long timer_div;
+
+ struct list_head gpios;
+ struct led_trigger led_trigger;
+ unsigned int duty_cycle;
+ unsigned int duty;
+
+ unsigned int fade;
+ unsigned int fade_min;
+ unsigned int fade_max;
+ unsigned int fade_speed;
+ unsigned int fade_dir;
+ unsigned int fade_count;
};
static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
static irqreturn_t rt_timer_irq(int irq, void *_rt)
{
struct rt_timer *rt = (struct rt_timer *) _rt;
+ struct rt_timer_gpio *gpio;
+ unsigned int val;
- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+ if (rt->fade && (rt->fade_count++ > rt->fade_speed)) {
+ rt->fade_count = 0;
+ if (rt->duty_cycle <= rt->fade_min)
+ rt->fade_dir = 1;
+ else if (rt->duty_cycle >= rt->fade_max)
+ rt->fade_dir = 0;
+
+ if (rt->fade_dir)
+ rt->duty_cycle += 1;
+ else
+ rt->duty_cycle -= 1;
+
+ }
+
+ val = rt->timer_freq / rt->timer_div;
+ if (rt->duty)
+ val *= rt->duty_cycle;
+ else
+ val *= (100 - rt->duty_cycle);
+ val /= 100;
+
+ if (!list_empty(&rt->gpios))
+ list_for_each_entry(gpio, &rt->gpios, list)
+ led_set_brightness(gpio->led, !!rt->duty);
+
+ rt->duty = !rt->duty;
+
+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1);
rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
return IRQ_HANDLED;
}
-
static int rt_timer_request(struct rt_timer *rt)
{
- int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
- dev_name(rt->dev), rt);
+ int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq,
+ IRQF_DISABLED, dev_name(rt->dev), rt);
if (err) {
dev_err(rt->dev, "failed to request irq\n");
} else {
@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
else
rt->timer_div = divisor;
- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-
return 0;
}
@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
}
+static ssize_t led_fade_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+
+ return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max);
+}
+
+static ssize_t led_fade_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+ unsigned int speed = 0, min = 0, max = 0;
+ ssize_t ret = -EINVAL;
+
+ ret = sscanf(buf, "%u %u %u", &speed, &min, &max);
+
+ if (ret == 3) {
+ rt->fade_speed = speed;
+ rt->fade_min = min;
+ rt->fade_max = max;
+ rt->fade = 1;
+ } else {
+ rt->fade = 0;
+ }
+
+ return size;
+}
+
+static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store);
+
+static ssize_t led_duty_cycle_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+
+ return sprintf(buf, "%u\n", rt->duty_cycle);
+}
+
+static ssize_t led_duty_cycle_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ if (state <= 100)
+ rt->duty_cycle = state;
+ else
+ rt->duty_cycle = 100;
+
+ rt->fade = 0;
+
+ return size;
+}
+
+static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store);
+
+static void rt_timer_trig_activate(struct led_classdev *led_cdev)
+{
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+ struct rt_timer_gpio *gpio_data;
+ int rc;
+
+ led_cdev->trigger_data = NULL;
+ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
+ if (!gpio_data)
+ return;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle);
+ if (rc)
+ goto err_gpio;
+ rc = device_create_file(led_cdev->dev, &dev_attr_fade);
+ if (rc)
+ goto err_out_duty_cycle;
+
+ led_cdev->activated = true;
+ led_cdev->trigger_data = gpio_data;
+ gpio_data->led = led_cdev;
+ list_add(&gpio_data->list, &rt->gpios);
+ led_cdev->trigger_data = gpio_data;
+ rt_timer_enable(rt);
+ return;
+
+err_out_duty_cycle:
+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
+
+err_gpio:
+ kfree(gpio_data);
+}
+
+static void rt_timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
+ struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
+ device_remove_file(led_cdev->dev, &dev_attr_fade);
+ led_cdev->activated = false;
+ }
+
+ list_del(&gpio_data->list);
+ rt_timer_disable(rt);
+ led_set_brightness(led_cdev, LED_OFF);
+}
+
static int rt_timer_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const __be32 *divisor;
struct rt_timer *rt;
struct clk *clk;
+ int ret;
rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
if (!rt) {
@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platfor
if (!rt->timer_freq)
return -EINVAL;
+ rt->duty_cycle = 100;
rt->dev = &pdev->dev;
platform_set_drvdata(pdev, rt);
- rt_timer_request(rt);
- rt_timer_config(rt, 2);
- rt_timer_enable(rt);
+ ret = rt_timer_request(rt);
+ if (ret)
+ return ret;
+
+ divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL);
+ if (divisor)
+ rt_timer_config(rt, be32_to_cpu(*divisor));
+ else
+ rt_timer_config(rt, 200);
+
+ rt->led_trigger.name = "pwmtimer",
+ rt->led_trigger.activate = rt_timer_trig_activate,
+ rt->led_trigger.deactivate = rt_timer_trig_deactivate,
+
+ ret = led_trigger_register(&rt->led_trigger);
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&rt->gpios);
dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platfo
{
struct rt_timer *rt = platform_get_drvdata(pdev);
+ led_trigger_unregister(&rt->led_trigger);
rt_timer_disable(rt);
rt_timer_free(rt);
@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_d
module_platform_driver(rt_timer_driver);
-MODULE_DESCRIPTION("Ralink RT2880 timer");
+MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
MODULE_LICENSE("GPL");

23
target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
View file

@ -1,23 +0,0 @@
From f57edea9db0f7f437bc4f2ae408f6dd8bfbb9062 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 04:53:02 +0000
Subject: [PATCH 110/133] MIPS: ralink: add a helper for reading the ECO
version
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -79,4 +79,9 @@
#define MT7620_GPIO_MODE_EPHY BIT(15)
#define MT7620_GPIO_MODE_WDT BIT(22)
+static inline int mt7620_get_eco(void)
+{
+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
+}
+
#endif

662
target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch
View file

@ -1,662 +0,0 @@
From 2d7e32d4825e20e9db4f0dff6b3e3c25c8c7ad7d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 3 Dec 2013 17:05:05 +0100
Subject: [PATCH 111/133] DMA: ralink: add rt2880 dma engine
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/dma/Kconfig | 6 +
drivers/dma/Makefile | 1 +
drivers/dma/dmaengine.c | 26 ++
drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/dmaengine.h | 1 +
5 files changed, 611 insertions(+)
create mode 100644 drivers/dma/ralink-gdma.c
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -312,6 +312,12 @@ config MMP_PDMA
help
Support the MMP PDMA engine for PXA and MMP platfrom.
+config DMA_RALINK
+ tristate "RALINK DMA support"
+ depends on RALINK && SOC_MT7620
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+
config DMA_ENGINE
bool
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat
}
/**
+ * dma_request_slave_channel - try to get specific channel exclusively
+ * @chan: target channel
+ */
+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan)
+{
+ int err = -EBUSY;
+
+ /* lock against __dma_request_channel */
+ mutex_lock(&dma_list_mutex);
+
+ if (chan->client_count == 0) {
+ err = dma_chan_get(chan);
+ if (err)
+ pr_debug("%s: failed to get %s: (%d)\n",
+ __func__, dma_chan_name(chan), err);
+ } else
+ chan = NULL;
+
+ mutex_unlock(&dma_list_mutex);
+
+ return chan;
+}
+EXPORT_SYMBOL_GPL(dma_get_slave_channel);
+
+
+/**
* dma_request_channel - try to allocate an exclusive channel
* @mask: capabilities that the channel must satisfy
* @fn: optional callback to disposition available channels
--- /dev/null
+++ b/drivers/dma/ralink-gdma.c
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
+ * GDMA4740 DMAC support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/of_dma.h>
+
+#include "virt-dma.h"
+
+#define GDMA_NR_CHANS 16
+
+#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
+#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
+
+#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
+#define GDMA_REG_CTRL0_TX_MASK 0xffff
+#define GDMA_REG_CTRL0_TX_SHIFT 16
+#define GDMA_REG_CTRL0_CURR_MASK 0xff
+#define GDMA_REG_CTRL0_CURR_SHIFT 8
+#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
+#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
+#define GDMA_REG_CTRL0_BURST_MASK 0x7
+#define GDMA_REG_CTRL0_BURST_SHIFT 3
+#define GDMA_REG_CTRL0_DONE_INT BIT(2)
+#define GDMA_REG_CTRL0_ENABLE BIT(1)
+#define GDMA_REG_CTRL0_HW_MODE 0
+
+#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
+#define GDMA_REG_CTRL1_SEG_MASK 0xf
+#define GDMA_REG_CTRL1_SEG_SHIFT 22
+#define GDMA_REG_CTRL1_REQ_MASK 0x3f
+#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
+#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
+#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
+#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
+#define GDMA_REG_CTRL1_NEXT_SHIFT 3
+#define GDMA_REG_CTRL1_COHERENT BIT(2)
+#define GDMA_REG_CTRL1_FAIL BIT(1)
+#define GDMA_REG_CTRL1_MASK BIT(0)
+
+#define GDMA_REG_UNMASK_INT 0x200
+#define GDMA_REG_DONE_INT 0x204
+
+#define GDMA_REG_GCT 0x220
+#define GDMA_REG_GCT_CHAN_MASK 0x3
+#define GDMA_REG_GCT_CHAN_SHIFT 3
+#define GDMA_REG_GCT_VER_MASK 0x3
+#define GDMA_REG_GCT_VER_SHIFT 1
+#define GDMA_REG_GCT_ARBIT_RR BIT(0)
+
+enum gdma_dma_transfer_size {
+ GDMA_TRANSFER_SIZE_4BYTE = 0,
+ GDMA_TRANSFER_SIZE_8BYTE = 1,
+ GDMA_TRANSFER_SIZE_16BYTE = 2,
+ GDMA_TRANSFER_SIZE_32BYTE = 3,
+};
+
+struct gdma_dma_sg {
+ dma_addr_t addr;
+ unsigned int len;
+};
+
+struct gdma_dma_desc {
+ struct virt_dma_desc vdesc;
+
+ enum dma_transfer_direction direction;
+ bool cyclic;
+
+ unsigned int num_sgs;
+ struct gdma_dma_sg sg[];
+};
+
+struct gdma_dmaengine_chan {
+ struct virt_dma_chan vchan;
+ unsigned int id;
+
+ dma_addr_t fifo_addr;
+ unsigned int transfer_shift;
+
+ struct gdma_dma_desc *desc;
+ unsigned int next_sg;
+};
+
+struct gdma_dma_dev {
+ struct dma_device ddev;
+ void __iomem *base;
+ struct clk *clk;
+
+ struct gdma_dmaengine_chan chan[GDMA_NR_CHANS];
+};
+
+static struct gdma_dma_dev *gdma_dma_chan_get_dev(
+ struct gdma_dmaengine_chan *chan)
+{
+ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
+ ddev);
+}
+
+static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
+{
+ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
+}
+
+static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
+{
+ return container_of(vdesc, struct gdma_dma_desc, vdesc);
+}
+
+static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
+ unsigned int reg)
+{
+ return readl(dma_dev->base + reg);
+}
+
+static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
+ unsigned reg, uint32_t val)
+{
+ //printk("gdma --> %p = 0x%08X\n", dma_dev->base + reg, val);
+ writel(val, dma_dev->base + reg);
+}
+
+static inline void gdma_dma_write_mask(struct gdma_dma_dev *dma_dev,
+ unsigned int reg, uint32_t val, uint32_t mask)
+{
+ uint32_t tmp;
+
+ tmp = gdma_dma_read(dma_dev, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ gdma_dma_write(dma_dev, reg, tmp);
+}
+
+static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
+{
+ return kzalloc(sizeof(struct gdma_dma_desc) +
+ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
+}
+
+static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
+{
+ if (maxburst <= 7)
+ return GDMA_TRANSFER_SIZE_4BYTE;
+ else if (maxburst <= 15)
+ return GDMA_TRANSFER_SIZE_8BYTE;
+ else if (maxburst <= 31)
+ return GDMA_TRANSFER_SIZE_16BYTE;
+
+ return GDMA_TRANSFER_SIZE_32BYTE;
+}
+
+static int gdma_dma_slave_config(struct dma_chan *c,
+ const struct dma_slave_config *config)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
+ enum gdma_dma_transfer_size transfer_size;
+ uint32_t flags;
+ uint32_t ctrl0, ctrl1;
+
+ switch (config->direction) {
+ case DMA_MEM_TO_DEV:
+ ctrl1 = 32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
+ ctrl1 |= config->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT;
+ flags = GDMA_REG_CTRL0_DST_ADDR_FIXED;
+ transfer_size = gdma_dma_maxburst(config->dst_maxburst);
+ chan->fifo_addr = config->dst_addr;
+ break;
+
+ case DMA_DEV_TO_MEM:
+ ctrl1 = config->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
+ ctrl1 |= 32 << GDMA_REG_CTRL1_DST_REQ_SHIFT;
+ flags = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
+ transfer_size = gdma_dma_maxburst(config->src_maxburst);
+ chan->fifo_addr = config->src_addr;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ chan->transfer_shift = 1 + transfer_size;
+
+ ctrl0 = flags | GDMA_REG_CTRL0_HW_MODE;
+ ctrl0 |= GDMA_REG_CTRL0_DONE_INT;
+
+ ctrl1 &= ~(GDMA_REG_CTRL1_NEXT_MASK << GDMA_REG_CTRL1_NEXT_SHIFT);
+ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
+ ctrl1 |= GDMA_REG_CTRL1_FAIL;
+ ctrl1 &= ~GDMA_REG_CTRL1_CONTINOUS;
+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
+ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
+
+ return 0;
+}
+
+static int gdma_dma_terminate_all(struct dma_chan *c)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
+ GDMA_REG_CTRL0_ENABLE);
+ chan->desc = NULL;
+ vchan_get_all_descriptors(&chan->vchan, &head);
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ vchan_dma_desc_free_list(&chan->vchan, &head);
+
+ return 0;
+}
+
+static int gdma_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct dma_slave_config *config = (struct dma_slave_config *)arg;
+
+ switch (cmd) {
+ case DMA_SLAVE_CONFIG:
+ return gdma_dma_slave_config(chan, config);
+ case DMA_TERMINATE_ALL:
+ return gdma_dma_terminate_all(chan);
+ default:
+ return -ENOSYS;
+ }
+}
+
+static int gdma_dma_start_transfer(struct gdma_dmaengine_chan *chan)
+{
+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
+ dma_addr_t src_addr, dst_addr;
+ struct virt_dma_desc *vdesc;
+ struct gdma_dma_sg *sg;
+
+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
+ GDMA_REG_CTRL0_ENABLE);
+
+ if (!chan->desc) {
+ vdesc = vchan_next_desc(&chan->vchan);
+ if (!vdesc)
+ return 0;
+ chan->desc = to_gdma_dma_desc(vdesc);
+ chan->next_sg = 0;
+ }
+
+ if (chan->next_sg == chan->desc->num_sgs)
+ chan->next_sg = 0;
+
+ sg = &chan->desc->sg[chan->next_sg];
+
+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
+ src_addr = sg->addr;
+ dst_addr = chan->fifo_addr;
+ } else {
+ src_addr = chan->fifo_addr;
+ dst_addr = sg->addr;
+ }
+ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
+ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id),
+ (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | GDMA_REG_CTRL0_ENABLE,
+ GDMA_REG_CTRL0_TX_MASK << GDMA_REG_CTRL0_TX_SHIFT);
+ chan->next_sg++;
+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL1(chan->id), 0, GDMA_REG_CTRL1_MASK);
+
+ return 0;
+}
+
+static void gdma_dma_chan_irq(struct gdma_dmaengine_chan *chan)
+{
+ spin_lock(&chan->vchan.lock);
+ if (chan->desc) {
+ if (chan->desc && chan->desc->cyclic) {
+ vchan_cyclic_callback(&chan->desc->vdesc);
+ } else {
+ if (chan->next_sg == chan->desc->num_sgs) {
+ chan->desc = NULL;
+ vchan_cookie_complete(&chan->desc->vdesc);
+ }
+ }
+ }
+ gdma_dma_start_transfer(chan);
+ spin_unlock(&chan->vchan.lock);
+}
+
+static irqreturn_t gdma_dma_irq(int irq, void *devid)
+{
+ struct gdma_dma_dev *dma_dev = devid;
+ uint32_t unmask, done;
+ unsigned int i;
+
+ unmask = gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT);
+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, unmask);
+ done = gdma_dma_read(dma_dev, GDMA_REG_DONE_INT);
+
+ for (i = 0; i < GDMA_NR_CHANS; ++i)
+ if (done & BIT(i))
+ gdma_dma_chan_irq(&dma_dev->chan[i]);
+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, done);
+
+ return IRQ_HANDLED;
+}
+
+static void gdma_dma_issue_pending(struct dma_chan *c)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
+ gdma_dma_start_transfer(chan);
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+}
+
+static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
+ struct dma_chan *c, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ struct gdma_dma_desc *desc;
+ struct scatterlist *sg;
+ unsigned int i;
+
+ desc = gdma_dma_alloc_desc(sg_len);
+ if (!desc)
+ return NULL;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ desc->sg[i].addr = sg_dma_address(sg);
+ desc->sg[i].len = sg_dma_len(sg);
+ }
+
+ desc->num_sgs = sg_len;
+ desc->direction = direction;
+ desc->cyclic = false;
+
+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+}
+
+static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
+ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ struct gdma_dma_desc *desc;
+ unsigned int num_periods, i;
+
+ if (buf_len % period_len)
+ return NULL;
+
+ num_periods = buf_len / period_len;
+
+ desc = gdma_dma_alloc_desc(num_periods);
+ if (!desc)
+ return NULL;
+
+ for (i = 0; i < num_periods; i++) {
+ desc->sg[i].addr = buf_addr;
+ desc->sg[i].len = period_len;
+ buf_addr += period_len;
+ }
+
+ desc->num_sgs = num_periods;
+ desc->direction = direction;
+ desc->cyclic = true;
+
+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+}
+
+static size_t gdma_dma_desc_residue(struct gdma_dmaengine_chan *chan,
+ struct gdma_dma_desc *desc, unsigned int next_sg)
+{
+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
+ unsigned int residue, count;
+ unsigned int i;
+
+ residue = 0;
+
+ for (i = next_sg; i < desc->num_sgs; i++)
+ residue += desc->sg[i].len;
+
+ if (next_sg != 0) {
+ count = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
+ count >>= GDMA_REG_CTRL0_CURR_SHIFT;
+ count &= GDMA_REG_CTRL0_CURR_MASK;
+ residue += count << chan->transfer_shift;
+ }
+
+ return residue;
+}
+
+static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
+ dma_cookie_t cookie, struct dma_tx_state *state)
+{
+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
+ struct virt_dma_desc *vdesc;
+ enum dma_status status;
+ unsigned long flags;
+
+ status = dma_cookie_status(c, cookie, state);
+ if (status == DMA_SUCCESS || !state)
+ return status;
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ vdesc = vchan_find_desc(&chan->vchan, cookie);
+ if (cookie == chan->desc->vdesc.tx.cookie) {
+ state->residue = gdma_dma_desc_residue(chan, chan->desc,
+ chan->next_sg);
+ } else if (vdesc) {
+ state->residue = gdma_dma_desc_residue(chan,
+ to_gdma_dma_desc(vdesc), 0);
+ } else {
+ state->residue = 0;
+ }
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ return status;
+}
+
+static int gdma_dma_alloc_chan_resources(struct dma_chan *c)
+{
+ return 0;
+}
+
+static void gdma_dma_free_chan_resources(struct dma_chan *c)
+{
+ vchan_free_chan_resources(to_virt_chan(c));
+}
+
+static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
+{
+ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
+}
+
+static struct dma_chan *
+of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct gdma_dma_dev *dma_dev = ofdma->of_dma_data;
+ unsigned int request = dma_spec->args[0];
+
+ if (request >= GDMA_NR_CHANS)
+ return NULL;
+
+ return dma_get_slave_channel(&(dma_dev->chan[request].vchan.chan));
+}
+
+static int gdma_dma_probe(struct platform_device *pdev)
+{
+ struct gdma_dmaengine_chan *chan;
+ struct gdma_dma_dev *dma_dev;
+ struct dma_device *dd;
+ unsigned int i;
+ struct resource *res;
+ uint32_t gct;
+ int ret;
+ int irq;
+
+
+ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
+ if (!dma_dev)
+ return -EINVAL;
+
+ dd = &dma_dev->ddev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dma_dev->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dma_dev->base))
+ return PTR_ERR(dma_dev->base);
+
+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
+ dd->device_alloc_chan_resources = gdma_dma_alloc_chan_resources;
+ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
+ dd->device_tx_status = gdma_dma_tx_status;
+ dd->device_issue_pending = gdma_dma_issue_pending;
+ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
+ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
+ dd->device_control = gdma_dma_control;
+ dd->dev = &pdev->dev;
+ dd->chancnt = GDMA_NR_CHANS;
+ INIT_LIST_HEAD(&dd->channels);
+
+ for (i = 0; i < dd->chancnt; i++) {
+ chan = &dma_dev->chan[i];
+ chan->id = i;
+ chan->vchan.desc_free = gdma_dma_desc_free;
+ vchan_init(&chan->vchan, dd);
+ }
+
+ ret = dma_async_device_register(dd);
+ if (ret)
+ return ret;
+
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ of_dma_xlate_by_chan_id, dma_dev);
+ if (ret)
+ goto err_unregister;
+
+ irq = platform_get_irq(pdev, 0);
+ ret = request_irq(irq, gdma_dma_irq, 0, dev_name(&pdev->dev), dma_dev);
+ if (ret)
+ goto err_unregister;
+
+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, 0);
+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, BIT(dd->chancnt) - 1);
+
+ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
+ dev_info(&pdev->dev, "revision: %d, channels: %d\n",
+ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
+ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) & GDMA_REG_GCT_CHAN_MASK));
+ platform_set_drvdata(pdev, dma_dev);
+
+ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
+
+ return 0;
+
+err_unregister:
+ dma_async_device_unregister(dd);
+ return ret;
+}
+
+static int gdma_dma_remove(struct platform_device *pdev)
+{
+ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ free_irq(irq, dma_dev);
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&dma_dev->ddev);
+
+ return 0;
+}
+
+static const struct of_device_id gdma_of_match_table[] = {
+ { .compatible = "ralink,rt2880-gdma" },
+ { },
+};
+
+static struct platform_driver gdma_dma_driver = {
+ .probe = gdma_dma_probe,
+ .remove = gdma_dma_remove,
+ .driver = {
+ .name = "gdma-rt2880",
+ .owner = THIS_MODULE,
+ .of_match_table = gdma_of_match_table,
+ },
+};
+module_platform_driver(gdma_dma_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GDMA4740 DMA driver");
+MODULE_LICENSE("GPLv2");
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -999,6 +999,7 @@ static inline void dma_release_channel(s
int dma_async_device_register(struct dma_device *device);
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
struct dma_chan *net_dma_find_channel(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)

711
target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch
View file

@ -1,711 +0,0 @@
From d4398d880eba386cb85d0a1a2ba39a336876dc0a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 3 Dec 2013 20:18:13 +0100
Subject: [PATCH 112/133] asoc: add mt7620 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/of.c | 2 +
sound/soc/Kconfig | 1 +
sound/soc/Makefile | 1 +
sound/soc/ralink/Kconfig | 15 ++
sound/soc/ralink/Makefile | 11 +
sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++
sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++
sound/soc/soc-io.c | 10 -
8 files changed, 621 insertions(+), 10 deletions(-)
create mode 100644 sound/soc/ralink/Kconfig
create mode 100644 sound/soc/ralink/Makefile
create mode 100644 sound/soc/ralink/mt7620-i2s.c
create mode 100644 sound/soc/ralink/mt7620-wm8960.c
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -15,6 +15,7 @@
#include <linux/of_fdt.h>
#include <linux/kernel.h>
#include <linux/bootmem.h>
+#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
@@ -25,6 +26,7 @@
#include "common.h"
__iomem void *rt_sysc_membase;
+EXPORT_SYMBOL(rt_sysc_membase);
__iomem void *rt_memc_membase;
extern struct boot_param_header __dtb_start;
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -48,6 +48,7 @@ source "sound/soc/kirkwood/Kconfig"
source "sound/soc/mid-x86/Kconfig"
source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
+source "sound/soc/ralink/Kconfig"
source "sound/soc/samsung/Kconfig"
source "sound/soc/s6000/Kconfig"
source "sound/soc/sh/Kconfig"
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/
obj-$(CONFIG_SND_SOC) += omap/
obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
+obj-$(CONFIG_SND_SOC) += ralink/
obj-$(CONFIG_SND_SOC) += samsung/
obj-$(CONFIG_SND_SOC) += s6000/
obj-$(CONFIG_SND_SOC) += sh/
--- /dev/null
+++ b/sound/soc/ralink/Kconfig
@@ -0,0 +1,15 @@
+config SND_MT7620_SOC_I2S
+ depends on SOC_MT7620 && SND_SOC
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ tristate "SoC Audio (I2S protocol) for Ralink MT7620 SoC"
+ help
+ Say Y if you want to use I2S protocol and I2S codec on Ingenic MT7620
+ based boards.
+
+config SND_MT7620_SOC_WM8960
+ tristate "SoC Audio support for Ralink WM8960"
+ select SND_MT7620_SOC_I2S
+ select SND_SOC_WM8960
+ help
+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
+ a.k.a Qi Ben NanoNote.
--- /dev/null
+++ b/sound/soc/ralink/Makefile
@@ -0,0 +1,11 @@
+#
+# Jz4740 Platform Support
+#
+snd-soc-mt7620-i2s-objs := mt7620-i2s.o
+
+obj-$(CONFIG_SND_MT7620_SOC_I2S) += snd-soc-mt7620-i2s.o
+
+# Jz4740 Machine Support
+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
+
+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
--- /dev/null
+++ b/sound/soc/ralink/mt7620-i2s.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/delay.h>
+
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/dmaengine_pcm.h>
+
+#include <ralink_regs.h>
+
+#define I2S_REG_CFG0 0x00
+#define I2S_REG_CFG0_EN BIT(31)
+#define I2S_REG_CFG0_DMA_EN BIT(30)
+#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
+#define I2S_REG_CFG0_TX_EN BIT(24)
+#define I2S_REG_CFG0_RX_EN BIT(20)
+#define I2S_REG_CFG0_SLAVE BIT(16)
+#define I2S_REG_CFG0_RX_THRES 12
+#define I2S_REG_CFG0_TX_THRES 4
+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
+ (4 << I2S_REG_CFG0_TX_THRES)
+
+#define I2S_REG_INT_STATUS 0x04
+#define I2S_REG_INT_EN 0x08
+#define I2S_REG_FF_STATUS 0x0c
+#define I2S_REG_WREG 0x10
+#define I2S_REG_RREG 0x14
+#define I2S_REG_CFG1 0x18
+
+#define I2S_REG_DIVCMP 0x20
+#define I2S_REG_DIVINT 0x24
+#define I2S_REG_CLK_EN BIT(31)
+
+struct mt7620_i2s {
+ struct resource *mem;
+ void __iomem *base;
+ dma_addr_t phys_base;
+
+ struct snd_dmaengine_dai_dma_data playback_dma_data;
+ struct snd_dmaengine_dai_dma_data capture_dma_data;
+};
+
+static inline uint32_t mt7620_i2s_read(const struct mt7620_i2s *i2s,
+ unsigned int reg)
+{
+ return readl(i2s->base + reg);
+}
+
+static inline void mt7620_i2s_write(const struct mt7620_i2s *i2s,
+ unsigned int reg, uint32_t value)
+{
+ //printk("i2s --> %p = 0x%08X\n", i2s->base + reg, value);
+ writel(value, i2s->base + reg);
+}
+
+static int mt7620_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t cfg;
+
+ if (dai->active)
+ return 0;
+
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+ cfg |= I2S_REG_CFG0_EN;
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+
+ return 0;
+}
+
+static void mt7620_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t cfg;
+
+ if (dai->active)
+ return;
+
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+ cfg &= ~I2S_REG_CFG0_EN;
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+}
+
+static int mt7620_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+ uint32_t cfg;
+ uint32_t mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ mask = I2S_REG_CFG0_TX_EN;
+ else
+ mask = I2S_REG_CFG0_RX_EN;
+
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ cfg |= mask;
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ cfg &= ~mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cfg & (I2S_REG_CFG0_TX_EN | I2S_REG_CFG0_RX_EN))
+ cfg |= I2S_REG_CFG0_DMA_EN;
+ else
+ cfg &= ~I2S_REG_CFG0_DMA_EN;
+
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+
+ return 0;
+}
+
+static int mt7620_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t cfg;
+
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ cfg |= I2S_REG_CFG0_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ cfg &= ~I2S_REG_CFG0_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_MSB:
+ cfg &= ~I2S_REG_CFG0_BYTE_SWAP;
+ break;
+ case SND_SOC_DAIFMT_LSB:
+ cfg |= I2S_REG_CFG0_BYTE_SWAP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+
+ return 0;
+}
+
+static int mt7620_i2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+
+ return 0;
+}
+
+unsigned long i2sMaster_inclk_int[11] = {
+ 78, 56, 52, 39, 28, 26, 19, 14, 13, 9, 6};
+unsigned long i2sMaster_inclk_comp[11] = {
+ 64, 352, 42, 32, 176, 21, 272, 88, 10, 455, 261};
+
+
+static int mt7620_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+ printk("Internal REFCLK with fractional division\n");
+
+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
+
+/* struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ struct clk *parent;
+ int ret = 0;
+
+ switch (clk_id) {
+ case JZ4740_I2S_CLKSRC_EXT:
+ parent = clk_get(NULL, "ext");
+ clk_set_parent(i2s->clk_i2s, parent);
+ break;
+ case JZ4740_I2S_CLKSRC_PLL:
+ parent = clk_get(NULL, "pll half");
+ clk_set_parent(i2s->clk_i2s, parent);
+ ret = clk_set_rate(i2s->clk_i2s, freq);
+ break;
+ default:
+ return -EINVAL;
+ }
+ clk_put(parent);
+
+ return ret;*/
+ return 0;
+}
+
+static int mt7620_i2s_suspend(struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t cfg;
+
+ if (dai->active) {
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+ cfg &= ~I2S_REG_CFG0_TX_EN;
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+ }
+
+ return 0;
+}
+
+static int mt7620_i2s_resume(struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t cfg;
+
+ if (dai->active) {
+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
+ cfg |= I2S_REG_CFG0_TX_EN;
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
+ }
+
+ return 0;
+}
+
+static void mt7620_i2c_init_pcm_config(struct mt7620_i2s *i2s)
+{
+ struct snd_dmaengine_dai_dma_data *dma_data;
+
+ /* Playback */
+ dma_data = &i2s->playback_dma_data;
+ dma_data->maxburst = 16;
+ dma_data->slave_id = 2; //JZ4740_DMA_TYPE_AIC_TRANSMIT;
+ dma_data->addr = i2s->phys_base + I2S_REG_WREG;
+
+ /* Capture */
+ dma_data = &i2s->capture_dma_data;
+ dma_data->maxburst = 16;
+ dma_data->slave_id = 3; //JZ4740_DMA_TYPE_AIC_RECEIVE;
+ dma_data->addr = i2s->phys_base + I2S_REG_RREG;
+}
+
+static int mt7620_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+ uint32_t data;
+
+ mt7620_i2c_init_pcm_config(i2s);
+ dai->playback_dma_data = &i2s->playback_dma_data;
+ dai->capture_dma_data = &i2s->capture_dma_data;
+
+ /* set share pins to i2s/gpio mode and i2c mode */
+ data = rt_sysc_r32(0x60);
+ data &= 0xFFFFFFE2;
+ data |= 0x00000018;
+ rt_sysc_w32(data, 0x60);
+
+ printk("Internal REFCLK with fractional division\n");
+
+ mt7620_i2s_write(i2s, I2S_REG_CFG0, I2S_REG_CFG0_DFT_THRES);
+ mt7620_i2s_write(i2s, I2S_REG_CFG1, 0);
+ mt7620_i2s_write(i2s, I2S_REG_INT_EN, 0);
+
+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
+
+ return 0;
+}
+
+static int mt7620_i2s_dai_remove(struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+static const struct snd_soc_dai_ops mt7620_i2s_dai_ops = {
+ .startup = mt7620_i2s_startup,
+ .shutdown = mt7620_i2s_shutdown,
+ .trigger = mt7620_i2s_trigger,
+ .hw_params = mt7620_i2s_hw_params,
+ .set_fmt = mt7620_i2s_set_fmt,
+ .set_sysclk = mt7620_i2s_set_sysclk,
+};
+
+#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_S16_LE)
+
+static struct snd_soc_dai_driver mt7620_i2s_dai = {
+ .probe = mt7620_i2s_dai_probe,
+ .remove = mt7620_i2s_dai_remove,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = JZ4740_I2S_FMTS,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .formats = JZ4740_I2S_FMTS,
+ },
+ .symmetric_rates = 1,
+ .ops = &mt7620_i2s_dai_ops,
+ .suspend = mt7620_i2s_suspend,
+ .resume = mt7620_i2s_resume,
+};
+
+static const struct snd_pcm_hardware mt7620_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
+ .period_bytes_min = PAGE_SIZE,
+ .period_bytes_max = 64 * 1024,
+ .periods_min = 2,
+ .periods_max = 128,
+ .buffer_bytes_max = 128 * 1024,
+ .fifo_size = 32,
+};
+
+static const struct snd_dmaengine_pcm_config mt7620_dmaengine_pcm_config = {
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+ .pcm_hardware = &mt7620_pcm_hardware,
+ .prealloc_buffer_size = 256 * PAGE_SIZE,
+};
+
+static const struct snd_soc_component_driver mt7620_i2s_component = {
+ .name = "mt7620-i2s",
+};
+
+static int mt7620_i2s_dev_probe(struct platform_device *pdev)
+{
+ struct mt7620_i2s *i2s;
+ int ret;
+
+ snd_dmaengine_pcm_register(&pdev->dev,
+ &mt7620_dmaengine_pcm_config,
+ SND_DMAENGINE_PCM_FLAG_COMPAT);
+
+ i2s = kzalloc(sizeof(*i2s), GFP_KERNEL);
+ if (!i2s)
+ return -ENOMEM;
+
+ i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!i2s->mem) {
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem),
+ pdev->name);
+ if (!i2s->mem) {
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem));
+ if (!i2s->base) {
+ ret = -EBUSY;
+ goto err_release_mem_region;
+ }
+
+ i2s->phys_base = i2s->mem->start;
+
+ platform_set_drvdata(pdev, i2s);
+ ret = snd_soc_register_component(&pdev->dev, &mt7620_i2s_component,
+ &mt7620_i2s_dai, 1);
+
+ if (!ret) {
+ dev_err(&pdev->dev, "loaded\n");
+ return ret;
+ }
+
+ dev_err(&pdev->dev, "Failed to register DAI\n");
+ iounmap(i2s->base);
+
+err_release_mem_region:
+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
+err_free:
+ kfree(i2s);
+
+ return ret;
+}
+
+static int mt7620_i2s_dev_remove(struct platform_device *pdev)
+{
+ struct mt7620_i2s *i2s = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_component(&pdev->dev);
+
+ iounmap(i2s->base);
+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
+
+ kfree(i2s);
+
+ snd_dmaengine_pcm_unregister(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id mt7620_i2s_match[] = {
+ { .compatible = "ralink,mt7620a-i2s" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt7620_i2s_match);
+
+static struct platform_driver mt7620_i2s_driver = {
+ .probe = mt7620_i2s_dev_probe,
+ .remove = mt7620_i2s_dev_remove,
+ .driver = {
+ .name = "mt7620-i2s",
+ .owner = THIS_MODULE,
+ .of_match_table = mt7620_i2s_match,
+ },
+};
+
+module_platform_driver(mt7620_i2s_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt7620-i2s");
--- /dev/null
+++ b/sound/soc/ralink/mt7620-wm8960.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+
+static const struct snd_soc_dapm_widget mt7620_wm8960_widgets[] = {
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route mt7620_wm8960_routes[] = {
+ {"Speaker", NULL, "HP_L"},
+ {"Speaker", NULL, "HP_R"},
+};
+
+#define MT7620_DAIFMT (SND_SOC_DAIFMT_I2S | \
+ SND_SOC_DAIFMT_NB_NF | \
+ SND_SOC_DAIFMT_CBM_CFM)
+
+static int mt7620_wm8960_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_codec *codec = rtd->codec;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+ int ret;
+
+ snd_soc_dapm_enable_pin(dapm, "HP_L");
+ snd_soc_dapm_enable_pin(dapm, "HP_R");
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, MT7620_DAIFMT);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_dai_link mt7620_wm8960_dai = {
+ .name = "mt7620",
+ .stream_name = "mt7620",
+ .init = mt7620_wm8960_codec_init,
+ .codec_dai_name = "wm8960-hifi",
+};
+
+static struct snd_soc_card mt7620_wm8960 = {
+ .name = "mt7620-wm8960",
+ .owner = THIS_MODULE,
+ .dai_link = &mt7620_wm8960_dai,
+ .num_links = 1,
+
+ .dapm_widgets = mt7620_wm8960_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(mt7620_wm8960_widgets),
+ .dapm_routes = mt7620_wm8960_routes,
+ .num_dapm_routes = ARRAY_SIZE(mt7620_wm8960_routes),
+};
+
+static int mt7620_wm8960_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct snd_soc_card *card = &mt7620_wm8960;
+ int ret;
+
+ card->dev = &pdev->dev;
+
+ mt7620_wm8960_dai.cpu_of_node = of_parse_phandle(np, "cpu-dai", 0);
+ mt7620_wm8960_dai.codec_of_node = of_parse_phandle(np, "codec-dai", 0);
+ mt7620_wm8960_dai.platform_of_node = mt7620_wm8960_dai.cpu_of_node;
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+ }
+ return ret;
+}
+
+static int mt7620_wm8960_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+ return 0;
+}
+
+static const struct of_device_id mt7620_audio_match[] = {
+ { .compatible = "ralink,wm8960-audio" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt7620_audio_match);
+
+static struct platform_driver mt7620_wm8960_driver = {
+ .driver = {
+ .name = "wm8960-audio",
+ .owner = THIS_MODULE,
+ .of_match_table = mt7620_audio_match,
+ },
+ .probe = mt7620_wm8960_probe,
+ .remove = mt7620_wm8960_remove,
+};
+
+module_platform_driver(mt7620_wm8960_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qi-lb60-audio");
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -19,7 +19,6 @@
#include <trace/events/asoc.h>
-#ifdef CONFIG_REGMAP
static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
@@ -161,12 +160,3 @@ int snd_soc_codec_set_cache_io(struct sn
return PTR_RET(codec->control_data);
}
EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-#else
-int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
- int addr_bits, int data_bits,
- enum snd_soc_control_type control)
-{
- return -ENOTSUPP;
-}
-EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-#endif

1311
target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch
View file

File diff suppressed because it is too large Load diff

319
target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch
View file

@ -1,319 +0,0 @@
From b7040c3ad7b8daf8309d083e9248cfa577075cfb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 21 Mar 2013 18:27:29 +0100
Subject: [PATCH 114/133] PCI: MIPS: adds rt2880 pci support
Add support for the pci found on the rt2880 SoC.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-rt2880.c | 281 ++++++++++++++++++++++++++++++++++++++++++++
arch/mips/ralink/Kconfig | 1 +
3 files changed, 283 insertions(+)
create mode 100644 arch/mips/pci/pci-rt2880.c
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
--- /dev/null
+++ b/arch/mips/pci/pci-rt2880.c
@@ -0,0 +1,281 @@
+/*
+ * Ralink RT288x SoC PCI register definitions
+ *
+ * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+
+#include <asm/mach-ralink/rt288x.h>
+
+#define RT2880_PCI_BASE 0x00440000
+#define RT288X_CPU_IRQ_PCI 4
+
+#define RT2880_PCI_MEM_BASE 0x20000000
+#define RT2880_PCI_MEM_SIZE 0x10000000
+#define RT2880_PCI_IO_BASE 0x00460000
+#define RT2880_PCI_IO_SIZE 0x00010000
+
+#define RT2880_PCI_REG_PCICFG_ADDR 0x00
+#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
+#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
+#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
+#define RT2880_PCI_REG_CONFIG_ADDR 0x20
+#define RT2880_PCI_REG_CONFIG_DATA 0x24
+#define RT2880_PCI_REG_MEMBASE 0x28
+#define RT2880_PCI_REG_IOBASE 0x2c
+#define RT2880_PCI_REG_ID 0x30
+#define RT2880_PCI_REG_CLASS 0x34
+#define RT2880_PCI_REG_SUBID 0x38
+#define RT2880_PCI_REG_ARBCTL 0x80
+
+static void __iomem *rt2880_pci_base;
+static DEFINE_SPINLOCK(rt2880_pci_lock);
+
+static u32 rt2880_pci_reg_read(u32 reg)
+{
+ return readl(rt2880_pci_base + reg);
+}
+
+static void rt2880_pci_reg_write(u32 val, u32 reg)
+{
+ writel(val, rt2880_pci_base + reg);
+}
+
+static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+ unsigned int func, unsigned int where)
+{
+ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+ 0x80000000);
+}
+
+static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+ u32 data;
+
+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+ PCI_FUNC(devfn), where);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt2880_pci_ops = {
+ .read = rt2880_pci_config_read,
+ .write = rt2880_pci_config_write,
+};
+
+static struct resource rt2880_pci_mem_resource = {
+ .name = "PCI MEM space",
+ .start = RT2880_PCI_MEM_BASE,
+ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource rt2880_pci_io_resource = {
+ .name = "PCI IO space",
+ .start = RT2880_PCI_IO_BASE,
+ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct pci_controller rt2880_pci_controller = {
+ .pci_ops = &rt2880_pci_ops,
+ .mem_resource = &rt2880_pci_mem_resource,
+ .io_resource = &rt2880_pci_io_resource,
+};
+
+static inline u32 rt2880_pci_read_u32(unsigned long reg)
+{
+ unsigned long flags;
+ u32 address;
+ u32 ret;
+
+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+
+ return ret;
+}
+
+static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
+{
+ unsigned long flags;
+ u32 address;
+
+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
+
+ spin_lock_irqsave(&rt2880_pci_lock, flags);
+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
+ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u16 cmd;
+ int irq = -1;
+
+ if (dev->bus->number != 0)
+ return irq;
+
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0x00:
+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
+ break;
+ case 0x11:
+ irq = RT288X_CPU_IRQ_PCI;
+ break;
+ default:
+ printk("%s:%s[%d] trying to alloc unknown pci irq\n",
+ __FILE__, __func__, __LINE__);
+ BUG();
+ break;
+ }
+
+ pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
+ pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
+ pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
+ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
+ pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
+ pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
+ dev->irq);
+ return irq;
+}
+
+static int rt288x_pci_probe(struct platform_device *pdev)
+{
+ void __iomem *io_map_base;
+ int i;
+
+ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
+
+ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
+ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
+ set_io_port_base((unsigned long) io_map_base);
+
+ ioport_resource.start = RT2880_PCI_IO_BASE;
+ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
+
+ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
+ for(i = 0; i < 0xfffff; i++) {}
+
+ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
+ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
+ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
+ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
+ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
+ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
+ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
+ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
+ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
+
+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
+
+ register_pci_controller(&rt2880_pci_controller);
+ return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id rt288x_pci_match[] = {
+ { .compatible = "ralink,rt288x-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt288x_pci_match);
+
+static struct platform_driver rt288x_pci_driver = {
+ .probe = rt288x_pci_probe,
+ .driver = {
+ .name = "rt288x-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = rt288x_pci_match,
+ },
+};
+
+int __init pcibios_init(void)
+{
+ int ret = platform_driver_register(&rt288x_pci_driver);
+ if (ret)
+ pr_info("rt288x-pci: Error registering platform driver!");
+ return ret;
+}
+
+arch_initcall(pcibios_init);
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,7 @@ choice
config SOC_RT288X
bool "RT288x"
+ select HW_HAS_PCI
config SOC_RT305X
bool "RT305x"

399
target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch
View file

@ -1,399 +0,0 @@
From 686f5642c74323f7e7eafb93c2b85df589cbf66e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sat, 18 May 2013 22:06:15 +0200
Subject: [PATCH 115/133] PCI: MIPS: adds mt7620a pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++
arch/mips/ralink/Kconfig | 1 +
3 files changed, 365 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7620a.c
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620a.c
@@ -0,0 +1,363 @@
+/*
+ * Ralink MT7620A SoC PCI support
+ *
+ * Copyright (C) 2007-2013 Bruce Chang
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RALINK_PCI_MM_MAP_BASE 0x20000000
+#define RALINK_PCI_IO_MAP_BASE 0x10160000
+
+#define RALINK_INT_PCIE0 4
+#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000
+#define RALINK_SYSCFG1 0x14
+#define RALINK_CLKCFG1 0x30
+#define RALINK_GPIOMODE 0x60
+#define RALINK_PCIE_CLK_GEN 0x7c
+#define RALINK_PCIE_CLK_GEN1 0x80
+#define PCIEPHY0_CFG 0x90
+#define PPLL_CFG1 0x9c
+#define PPLL_DRV 0xa0
+#define RALINK_PCI_HOST_MODE_EN (1<<7)
+#define RALINK_PCIE_RC_MODE_EN (1<<8)
+#define RALINK_PCIE_RST (1<<23)
+#define RALINK_PCI_RST (1<<24)
+#define RALINK_PCI_CLK_EN (1<<19)
+#define RALINK_PCIE_CLK_EN (1<<21)
+#define PCI_SLOTx2 (1<<11)
+#define PCI_SLOTx1 (2<<11)
+#define PDRV_SW_SET (1<<31)
+#define LC_CKDRVPD_ (1<<19)
+
+#define RALINK_PCI_CONFIG_ADDR 0x20
+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
+#define MEMORY_BASE 0x0
+#define RALINK_PCIE0_RST (1<<26)
+#define RALINK_PCI_BASE 0xB0140000
+#define RALINK_PCI_MEMBASE 0x28
+#define RALINK_PCI_IOBASE 0x2C
+
+#define RT6855_PCIE0_OFFSET 0x2000
+
+#define RALINK_PCI_PCICFG_ADDR 0x00
+#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
+#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
+#define RALINK_PCI0_ID 0x30
+#define RALINK_PCI0_CLASS 0x34
+#define RALINK_PCI0_SUBID 0x38
+#define RALINK_PCI0_STATUS 0x50
+#define RALINK_PCI_PCIMSK_ADDR 0x0C
+
+#define RALINK_PCIE0_CLK_EN (1 << 26)
+
+#define BUSY 0x80000000
+#define WAITRETRY_MAX 10
+#define WRITE_MODE (1UL << 23)
+#define DATA_SHIFT 0
+#define ADDR_SHIFT 8
+
+
+static void __iomem *bridge_base;
+static void __iomem *pcie_base;
+
+static struct reset_control *rstpcie0;
+
+static inline void bridge_w32(u32 val, unsigned reg)
+{
+ iowrite32(val, bridge_base + reg);
+}
+
+static inline u32 bridge_r32(unsigned reg)
+{
+ return ioread32(bridge_base + reg);
+}
+
+static inline void pcie_w32(u32 val, unsigned reg)
+{
+ iowrite32(val, pcie_base + reg);
+}
+
+static inline u32 pcie_r32(unsigned reg)
+{
+ return ioread32(pcie_base + reg);
+}
+
+static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
+{
+ u32 val = pcie_r32(reg);
+ val &= ~clr;
+ val |= set;
+ pcie_w32(val, reg);
+}
+
+int wait_pciephy_busy(void)
+{
+ unsigned long reg_value = 0x0, retry = 0;
+
+ while (1) {
+ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
+ reg_value = pcie_r32(PCIEPHY0_CFG);
+
+ if (reg_value & BUSY)
+ mdelay(100);
+ else
+ break;
+ if (retry++ > WAITRETRY_MAX){
+ printk("PCIE-PHY retry failed.\n");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static void pcie_phy(unsigned long addr, unsigned long val)
+{
+ wait_pciephy_busy();
+ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
+ mdelay(1);
+ wait_pciephy_busy();
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+ u32 address;
+ u32 data;
+
+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+ u32 address;
+ u32 data;
+
+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
+
+ switch (size) {
+ case 1:
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 2:
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ break;
+ case 4:
+ data = val;
+ break;
+ }
+
+ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops mt7620a_pci_ops= {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
+
+static struct resource mt7620a_res_pci_mem1 = {
+ .name = "pci memory",
+ .start = RALINK_PCI_MM_MAP_BASE,
+ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
+ .flags = IORESOURCE_MEM,
+};
+static struct resource mt7620a_res_pci_io1 = {
+ .name = "pci io",
+ .start = RALINK_PCI_IO_MAP_BASE,
+ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller mt7620a_controller = {
+ .pci_ops = &mt7620a_pci_ops,
+ .mem_resource = &mt7620a_res_pci_mem1,
+ .io_resource = &mt7620a_res_pci_io1,
+ .mem_offset = 0x00000000UL,
+ .io_offset = 0x00000000UL,
+ .io_map_base = 0xa0000000,
+};
+
+static int mt7620a_pci_probe(struct platform_device *pdev)
+{
+ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
+ if (IS_ERR(rstpcie0))
+ return PTR_ERR(rstpcie0);
+
+ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
+ if (!bridge_base)
+ return -ENOMEM;
+
+ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
+ if (!pcie_base)
+ return -ENOMEM;
+
+ iomem_resource.start = 0;
+ iomem_resource.end= ~0;
+ ioport_resource.start= 0;
+ ioport_resource.end = ~0;
+
+ /* PCIE: bypass PCIe DLL */
+ pcie_phy(0x0, 0x80);
+ pcie_phy(0x1, 0x04);
+ /* PCIE: Elastic buffer control */
+ pcie_phy(0x68, 0xB4);
+
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
+ rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
+
+ reset_control_deassert(rstpcie0);
+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+
+ mdelay(100);
+
+ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
+ printk("MT7620 PPLL unlock\n");
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
+ return 0;
+ }
+ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
+
+ mdelay(100);
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
+
+ rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
+ rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
+
+ mdelay(50);
+ reset_control_deassert(rstpcie0);
+ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
+ mdelay(100);
+
+ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
+ reset_control_assert(rstpcie0);
+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
+ printk("PCIE0 no card, disable it(RST&CLK)\n");
+ }
+
+ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
+ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
+
+ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
+ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
+ pcie_w32(0x08021814, RALINK_PCI0_ID);
+ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
+ pcie_w32(0x28801814, RALINK_PCI0_SUBID);
+ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
+
+ register_pci_controller(&mt7620a_controller);
+
+ return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ const struct resource *res;
+ u16 cmd;
+ u32 val;
+ int i, irq = 0;
+
+ if ((dev->bus->number == 0) && (slot == 0)) {
+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
+ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
+ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
+ irq = RALINK_INT_PCIE0;
+ } else {
+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
+ return 0;
+ }
+
+ for (i = 0; i < 6; i++) {
+ res = &dev->resource[i];
+ }
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+
+ // FIXME
+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
+
+ return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static const struct of_device_id mt7620a_pci_ids[] = {
+ { .compatible = "ralink,mt7620a-pci" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
+
+static struct platform_driver mt7620a_pci_driver = {
+ .probe = mt7620a_pci_probe,
+ .driver = {
+ .name = "mt7620a-pci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mt7620a_pci_ids),
+ },
+};
+
+static int __init mt7620a_pci_init(void)
+{
+ return platform_driver_register(&mt7620a_pci_driver);
+}
+
+arch_initcall(mt7620a_pci_init);
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -33,6 +33,7 @@ choice
bool "MT7620"
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
endchoice

54
target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch
View file

@ -1,54 +0,0 @@
From bed88d4cb806d2738528cb7d368d6df79d9c1424 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sat, 11 May 2013 23:40:19 +0200
Subject: [PATCH 116/133] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/phy/phy.c | 9 ++++++---
include/linux/phy.h | 2 +-
2 files changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -820,7 +820,8 @@ void phy_state_machine(struct work_struc
* negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
break;
}
@@ -890,7 +891,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
}
phydev->adjust_link(phydev->attached_dev);
@@ -902,7 +904,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
- netif_carrier_off(phydev->attached_dev);
+ if (!phydev->no_auto_carrier_off)
+ netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
}
break;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -298,7 +298,7 @@ struct phy_device {
struct phy_c45_device_ids c45_ids;
bool is_c45;
-
+ bool no_auto_carrier_off;
enum phy_state state;
u32 dev_flags;

76
target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch
View file

@ -1,76 +0,0 @@
From 1282a0da09e059288eb8b576998ea001680f6628 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:26:15 +0200
Subject: [PATCH 117/133] NET: add of_get_mac_address_mtd()
Many embedded devices have information such as mac addresses stored inside mtd
devices. This patch allows us to add a property inside a node describing a
network interface. The new property points at a mtd partition with an offset
where the mac address can be found.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
include/linux/of_net.h | 1 +
2 files changed, 38 insertions(+)
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -10,6 +10,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/export.h>
+#include <linux/mtd/mtd.h>
/**
* It maps 'enum phy_interface_t' found in include/linux/phy.h
@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);
+
+int of_get_mac_address_mtd(struct device_node *np, void *mac)
+{
+ struct device_node *mtd_np = NULL;
+ size_t retlen;
+ int size, ret;
+ struct mtd_info *mtd;
+ const char *part;
+ const __be32 *list;
+ phandle phandle;
+
+ list = of_get_property(np, "mtd-mac-address", &size);
+ if (!list || (size != (2 * sizeof(*list))))
+ return -ENOENT;
+
+ phandle = be32_to_cpup(list++);
+ if (phandle)
+ mtd_np = of_find_node_by_phandle(phandle);
+
+ if (!mtd_np)
+ return -ENOENT;
+
+ part = of_get_property(mtd_np, "label", NULL);
+ if (!part)
+ part = mtd_np->name;
+
+ mtd = get_mtd_device_nm(part);
+ if (IS_ERR(mtd))
+ return PTR_ERR(mtd);
+
+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
+ put_mtd_device(mtd);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
--- a/include/linux/of_net.h
+++ b/include/linux/of_net.h
@@ -11,6 +11,7 @@
#include <linux/of.h>
extern const int of_get_phy_mode(struct device_node *np);
extern const void *of_get_mac_address(struct device_node *np);
+extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
#else
static inline const int of_get_phy_mode(struct device_node *np)
{

5063
target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
View file

File diff suppressed because it is too large Load diff

230
target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch
View file

@ -1,230 +0,0 @@
From 71e09658d3544143e46ae76e76da8a322cd73e1d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:31:19 +0200
Subject: [PATCH 119/133] USB: phy: add ralink SoC driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/usb/phy/Kconfig | 8 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/ralink-phy.c | 191 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 200 insertions(+)
create mode 100644 drivers/usb/phy/ralink-phy.c
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -210,4 +210,12 @@ config USB_ULPI_VIEWPORT
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
+config RALINK_USBPHY
+ bool "Ralink USB PHY controller Driver"
+ depends on MIPS && RALINK
+ select USB_OTG_UTILS
+ help
+ Enable this to support ralink USB phy controller for ralink
+ SoCs.
+
endif # USB_PHY
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-us
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
--- /dev/null
+++ b/drivers/usb/phy/ralink-phy.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * based on: Renesas R-Car USB phy driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT_SYSC_REG_SYSCFG1 0x014
+#define RT_SYSC_REG_CLKCFG1 0x030
+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
+
+#define RT_RSTCTRL_UDEV BIT(25)
+#define RT_RSTCTRL_UHST BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define USB_PHY_UTMI_8B60M BIT(1)
+#define UDEV_WAKEUP BIT(0)
+
+static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+static struct reset_control *rstdev;
+static struct reset_control *rsthost;
+static u32 phy_clk;
+
+static void usb_phy_enable(int state)
+{
+ if (state)
+ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
+ else
+ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
+ mdelay(100);
+}
+
+static int usb_power_on(struct usb_phy *phy)
+{
+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
+ u32 t;
+
+ usb_phy_enable(1);
+
+// reset_control_assert(rstdev);
+// reset_control_assert(rsthost);
+
+ if (OTG_STATE_B_HOST) {
+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
+ reset_control_deassert(rsthost);
+ } else {
+ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
+ reset_control_deassert(rstdev);
+ }
+ mdelay(100);
+
+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
+ dev_info(phy->dev, "remote usb device wakeup %s\n",
+ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
+ if (t & USB_PHY_UTMI_8B60M)
+ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
+ else
+ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
+ }
+
+ return 0;
+}
+
+static void usb_power_off(struct usb_phy *phy)
+{
+ if (atomic_dec_return(&usb_pwr_ref) == 0) {
+ usb_phy_enable(0);
+ reset_control_assert(rstdev);
+ reset_control_assert(rsthost);
+ }
+}
+
+static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->gadget = NULL;
+ otg->host = host;
+
+ return 0;
+}
+
+static int usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->host = NULL;
+ otg->gadget = gadget;
+
+ return 0;
+}
+
+static const struct of_device_id ralink_usbphy_dt_match[] = {
+ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
+ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
+
+static int usb_phy_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct usb_otg *otg;
+ struct usb_phy *phy;
+ int ret;
+
+ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
+ phy_clk = (int) match->data;
+
+ rsthost = devm_reset_control_get(&pdev->dev, "host");
+ if (IS_ERR(rsthost))
+ return PTR_ERR(rsthost);
+
+ rstdev = devm_reset_control_get(&pdev->dev, "device");
+ if (IS_ERR(rstdev))
+ return PTR_ERR(rstdev);
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
+ return -ENOMEM;
+ }
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+ return -ENOMEM;
+ }
+
+ phy->dev = dev;
+ phy->label = dev_name(dev);
+ phy->init = usb_power_on;
+ phy->shutdown = usb_power_off;
+ otg->set_host = usb_set_host;
+ otg->set_peripheral = usb_set_peripheral;
+ otg->phy = phy;
+ phy->otg = otg;
+ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
+
+ if (ret < 0) {
+ dev_err(dev, "usb phy addition error\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, phy);
+
+ dev_info(&pdev->dev, "loaded\n");
+
+ return ret;
+}
+
+static int usb_phy_remove(struct platform_device *pdev)
+{
+ struct usb_phy *phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(phy);
+
+ return 0;
+}
+
+static struct platform_driver usb_phy_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rt3xxx-usbphy",
+ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
+ },
+ .probe = usb_phy_probe,
+ .remove = usb_phy_remove,
+};
+
+module_platform_driver(usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Ralink USB phy");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");

174
target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch
View file

@ -1,174 +0,0 @@
From 08d438b69f3023f16b044b07eebee6b9c2302f60 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:34:53 +0200
Subject: [PATCH 120/133] USB: add OHCI/EHCI OF binding
based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/usb/Makefile | 3 ++-
drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++----
drivers/usb/host/ohci-platform.c | 37 ++++++++++++++++++++++++++++++++-----
3 files changed, 51 insertions(+), 10 deletions(-)
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_MON) += mon/
+obj-$(CONFIG_USB_PHY) += phy/
+
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
@@ -44,7 +46,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_PHY) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,8 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/otg.h>
#include "ehci.h"
@@ -118,6 +120,15 @@ static int ehci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
+#ifdef CONFIG_USB_PHY
+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(hcd->phy)) {
+ otg_set_host(hcd->phy->otg,
+ &hcd->self);
+ usb_phy_init(hcd->phy);
+ }
+#endif
+
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
@@ -155,6 +166,9 @@ static int ehci_platform_remove(struct p
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
+ if (pdata == &ehci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
return 0;
}
@@ -199,9 +213,8 @@ static int ehci_platform_resume(struct d
#define ehci_platform_resume NULL
#endif /* CONFIG_PM */
-static const struct of_device_id vt8500_ehci_ids[] = {
- { .compatible = "via,vt8500-ehci", },
- { .compatible = "wm,prizm-ehci", },
+static const struct of_device_id ralink_ehci_ids[] = {
+ { .compatible = "ralink,rt3xxx-ehci", },
{}
};
@@ -225,7 +238,7 @@ static struct platform_driver ehci_platf
.owner = THIS_MODULE,
.name = "ehci-platform",
.pm = &ehci_platform_pm_ops,
- .of_match_table = of_match_ptr(vt8500_ehci_ids),
+ .of_match_table = of_match_ptr(ralink_ehci_ids),
}
};
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -16,6 +16,10 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/usb/ohci_pdriver.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+
+static struct usb_ohci_pdata ohci_platform_defaults;
static int ohci_platform_reset(struct usb_hcd *hcd)
{
@@ -88,14 +92,22 @@ static int ohci_platform_probe(struct pl
{
struct usb_hcd *hcd;
struct resource *res_mem;
- struct usb_ohci_pdata *pdata = dev->dev.platform_data;
+ struct usb_ohci_pdata *pdata;
int irq;
int err = -ENOMEM;
- if (!pdata) {
- WARN_ON(1);
- return -ENODEV;
- }
+ /*
+ * use reasonable defaults so platforms don't have to provide these.
+ * with DT probing on ARM, none of these are set.
+ */
+ if (!dev->dev.platform_data)
+ dev->dev.platform_data = &ohci_platform_defaults;
+ if (!dev->dev.dma_mask)
+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+ if (!dev->dev.coherent_dma_mask)
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ pdata = dev->dev.platform_data;
if (usb_disabled())
return -ENODEV;
@@ -128,6 +140,12 @@ static int ohci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
+#ifdef CONFIG_USB_PHY
+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(hcd->phy))
+ usb_phy_init(hcd->phy);
+#endif
+
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
@@ -162,6 +180,9 @@ static int ohci_platform_remove(struct p
if (pdata->power_off)
pdata->power_off(dev);
+ if (pdata == &ohci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
return 0;
}
@@ -201,6 +222,11 @@ static int ohci_platform_resume(struct d
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
+static const struct of_device_id ralink_ohci_ids[] = {
+ { .compatible = "ralink,rt3xxx-ohci", },
+ {}
+};
+
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
@@ -221,5 +247,6 @@ static struct platform_driver ohci_platf
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
+ .of_match_table = of_match_ptr(ralink_ohci_ids),
}
};

24517
target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch
View file

File diff suppressed because it is too large Load diff

23
target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch
View file

@ -1,23 +0,0 @@
From 16f476a7528eefade4bd4ebee12d5aa2052bba8c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 15 Mar 2013 18:16:01 +0100
Subject: [PATCH 122/133] serial: ralink: adds mt7620 serial
Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/tty/serial/8250/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -300,7 +300,7 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
+ depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
help
If you have a Ralink RT288x/RT305x SoC based board and want to use the
serial port, say Y to this option. The driver can handle up to 2 serial

22
target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
View file

@ -1,22 +0,0 @@
From 304c4f060cfa6b44370ad3fe6a16963cac35b10a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 04:52:01 +0000
Subject: [PATCH 123/133] serial: ralink: the core has a size of 0x100 and not
0x1000
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/tty/serial/8250/8250_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2499,7 +2499,7 @@ serial8250_pm(struct uart_port *port, un
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
- return 0x1000;
+ return 0x100;
if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;

27
target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
View file

@ -1,27 +0,0 @@
From 3f70be332048f6a903dc35f73ff5381be3b8f12b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 14 Jul 2013 23:18:57 +0200
Subject: [PATCH 124/133] serial: of: allow au1x00 and rt288x to load from OF
In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
to default the iotype to UPIO_AU.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/tty/serial/of_serial.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -103,7 +103,10 @@ static int of_platform_serial_setup(stru
port->fifosize = prop;
port->irq = irq_of_parse_and_map(np, 0);
- port->iotype = UPIO_MEM;
+ if (of_device_is_compatible(np, "ralink,rt2880-uart"))
+ port->iotype = UPIO_AU;
+ else
+ port->iotype = UPIO_MEM;
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
switch (prop) {
case 1:

345
target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch
View file

@ -1,345 +0,0 @@
From 701cd2fb0513d17f248048b3a6f2c7d1ea294681 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 29 Apr 2013 14:40:43 +0200
Subject: [PATCH 125/133] i2c: MIPS: adds ralink I2C driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
drivers/i2c/busses/Kconfig | 4 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-ralink.c | 274 ++++++++++++++++++++
4 files changed, 306 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
create mode 100644 drivers/i2c/busses/i2c-ralink.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
@@ -0,0 +1,27 @@
+I2C for Ralink platforms
+
+Required properties :
+- compatible : Must be "link,rt3052-i2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example :
+
+palmbus@10000000 {
+ i2c@900 {
+ compatible = "link,rt3052-i2c";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@4b {
+ compatible = "national,lm92";
+ reg = <0x4b>;
+ };
+ };
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -632,6 +632,10 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
+config I2C_RALINK
+ tristate "Ralink I2C Controller"
+ select OF_I2C
+
config HAVE_S3C2410_I2C
bool
help
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ralink.c
@@ -0,0 +1,274 @@
+/*
+ * drivers/i2c/busses/i2c-ralink.c
+ *
+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/of_i2c.h>
+#include <linux/err.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define REG_CONFIG_REG 0x00
+#define REG_CLKDIV_REG 0x04
+#define REG_DEVADDR_REG 0x08
+#define REG_ADDR_REG 0x0C
+#define REG_DATAOUT_REG 0x10
+#define REG_DATAIN_REG 0x14
+#define REG_STATUS_REG 0x18
+#define REG_STARTXFR_REG 0x1C
+#define REG_BYTECNT_REG 0x20
+
+#define I2C_STARTERR BIT(4)
+#define I2C_ACKERR BIT(3)
+#define I2C_DATARDY BIT(2)
+#define I2C_SDOEMPTY BIT(1)
+#define I2C_BUSY BIT(0)
+
+#define I2C_DEVADLEN_7 (6 << 2)
+#define I2C_ADDRDIS BIT(1)
+
+#define I2C_RETRY 0x400
+
+#define CLKDIV_VALUE 200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
+//#define CLKDIV_VALUE 50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
+
+#define READ_CMD 0x01
+#define WRITE_CMD 0x00
+#define READ_BLOCK 64
+
+static void __iomem *membase;
+static struct i2c_adapter *adapter;
+
+static void rt_i2c_w32(u32 val, unsigned reg)
+{
+ iowrite32(val, membase + reg);
+}
+
+static u32 rt_i2c_r32(unsigned reg)
+{
+ return ioread32(membase + reg);
+}
+
+static inline int rt_i2c_wait_rx_done(void)
+{
+ int retries = I2C_RETRY;
+
+ do {
+ if (!retries--)
+ break;
+ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
+
+ return (retries < 0);
+}
+
+static inline int rt_i2c_wait_idle(void)
+{
+ int retries = I2C_RETRY;
+
+ do {
+ if (!retries--)
+ break;
+ } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
+
+ return (retries < 0);
+}
+
+static inline int rt_i2c_wait_tx_done(void)
+{
+ int retries = I2C_RETRY;
+
+ do {
+ if (!retries--)
+ break;
+ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
+
+ return (retries < 0);
+}
+
+static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
+{
+ int i = 0, j = 0, pos = 0;
+ int nblock = msg->len / READ_BLOCK;
+ int rem = msg->len % READ_BLOCK;
+
+ if (msg->flags & I2C_M_TEN) {
+ printk("10 bits addr not supported\n");
+ return -EINVAL;
+ }
+
+ if (msg->flags & I2C_M_RD) {
+ for (i = 0; i < nblock; i++) {
+ rt_i2c_wait_idle();
+ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
+ for (j = 0; j < READ_BLOCK; j++) {
+ if (rt_i2c_wait_rx_done())
+ return -1;
+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
+ }
+ }
+
+ rt_i2c_wait_idle();
+ rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
+ for (i = 0; i < rem; i++) {
+ if (rt_i2c_wait_rx_done())
+ return -1;
+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
+ }
+ } else {
+ rt_i2c_wait_idle();
+ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
+ for (i = 0; i < msg->len; i++) {
+ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
+ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
+ if (rt_i2c_wait_tx_done())
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
+{
+ int i = 0;
+ int ret = 0;
+
+ if (rt_i2c_wait_idle()) {
+ printk("i2c transfer failed\n");
+ return 0;
+ }
+
+ device_reset(a->dev.parent);
+
+ rt_i2c_w32(m->addr, REG_DEVADDR_REG);
+ rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
+ rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
+
+ for (i = 0; i < n && !ret; i++)
+ ret = rt_i2c_handle_msg(a, &m[i]);
+
+ if (ret) {
+ printk("i2c transfer failed\n");
+ return 0;
+ }
+
+ return n;
+}
+
+static u32 rt_i2c_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm rt_i2c_algo = {
+ .master_xfer = rt_i2c_master_xfer,
+ .functionality = rt_i2c_func,
+};
+
+static int rt_i2c_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret;
+
+ if (!res) {
+ dev_err(&pdev->dev, "no memory resource found\n");
+ return -ENODEV;
+ }
+
+ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (!adapter) {
+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
+ return -ENOMEM;
+ }
+
+ membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (IS_ERR(membase))
+ return PTR_ERR(membase);
+
+ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
+ adapter->owner = THIS_MODULE;
+ adapter->nr = pdev->id;
+ adapter->timeout = HZ;
+ adapter->algo = &rt_i2c_algo;
+ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ adapter->dev.parent = &pdev->dev;
+ adapter->dev.of_node = pdev->dev.of_node;
+
+ ret = i2c_add_numbered_adapter(adapter);
+ if (ret)
+ return ret;
+
+ of_i2c_register_devices(adapter);
+
+ platform_set_drvdata(pdev, adapter);
+
+ dev_info(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static int rt_i2c_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id i2c_rt_dt_ids[] = {
+ { .compatible = "ralink,rt2880-i2c", },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
+
+static struct platform_driver rt_i2c_driver = {
+ .probe = rt_i2c_probe,
+ .remove = rt_i2c_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "i2c-ralink",
+ .of_match_table = i2c_rt_dt_ids,
+ },
+};
+
+static int __init i2c_rt_init (void)
+{
+ return platform_driver_register(&rt_i2c_driver);
+}
+subsys_initcall(i2c_rt_init);
+
+static void __exit i2c_rt_exit (void)
+{
+ platform_driver_unregister(&rt_i2c_driver);
+}
+
+module_exit (i2c_rt_exit);
+
+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
+MODULE_DESCRIPTION("Ralink I2c host driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:Ralink-I2C");

29
target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch
View file

@ -1,29 +0,0 @@
From b07600f50efe84d7e3b431e6d10fe774bb00d573 Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@wwwdotorg.org>
Date: Tue, 21 May 2013 20:36:34 -0600
Subject: [PATCH 126/133] spi: introduce macros to set bits_per_word_mask
Introduce two macros to make setting up spi_master.bits_per_word_mask
easier, and avoid mistakes like writing BIT(n) instead of BIT(n - 1).
SPI_BPW_MASK is for a single supported value of bits_per_word_mask.
SPI_BPW_RANGE_MASK represents a contiguous set of bit lengths.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/linux/spi/spi.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -308,6 +308,8 @@ struct spi_master {
/* bitmask of supported bits_per_word for transfers */
u32 bits_per_word_mask;
+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
+#define SPI_BPW_RANGE_MASK(min, max) ((BIT(max) - 1) - (BIT(min) - 1))
/* other constraints relevant to this driver */
u16 flags;

3433
target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
View file

File diff suppressed because it is too large Load diff

29
target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
View file

@ -1,29 +0,0 @@
From 543f839e6fbeb325e6fa201e205ab18a46e37424 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 15 Jul 2013 00:38:51 +0200
Subject: [PATCH 128/133] mtd: fix cfi cmdset 0002 erase status check
---
drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1957,7 +1957,7 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
+ if (chip_good(map, adr, map_word_ff(map)))
break;
if (time_after(jiffies, timeo)) {
@@ -2046,7 +2046,7 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, map_word_ff(map))) {
xip_enable(map, chip, adr);
break;
}

70
target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch
View file

@ -1,70 +0,0 @@
From 0ffe6cdf77793536a77b5c85cf41deb27cfc7632 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 15 Jul 2013 00:39:21 +0200
Subject: [PATCH 129/133] mtd: cfi cmdset 0002 force word write
---
drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -41,7 +41,7 @@
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
#define MAX_WORD_RETRIES 3
@@ -52,7 +52,9 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#if !FORCE_WORD_WRITE
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#endif
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
+#if !FORCE_WORD_WRITE
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
mtd->_write = cfi_amdstd_write_buffers;
}
}
+#endif /* !FORCE_WORD_WRITE */
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
+#if !FORCE_WORD_WRITE
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
@@ -1585,7 +1590,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
-
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -1660,6 +1664,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
+#endif /* !FORCE_WORD_WRITE */
/*
* Wait for the flash chip to become ready to write data

2408
target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch
View file

File diff suppressed because it is too large Load diff

161
target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch
View file

@ -1,161 +0,0 @@
From f85e6dacdb7d7a9bc37f33cf8770006ab64286f7 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 27 Nov 2013 20:58:16 +0100
Subject: [PATCH 131/133] mtd: add chunked read io to m25p80
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/devices/m25p80.c | 127 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 127 insertions(+)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -392,6 +392,58 @@ static int m25p80_read(struct mtd_info *
return 0;
}
+static int m25p80_read_chunked(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_transfer t[2];
+ struct spi_message m;
+ uint8_t opcode;
+ int idx = 0;
+
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
+
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
+ t[0].tx_buf = flash->command;
+ t[0].len = m25p_cmdsz(flash);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+
+ *retlen = 0;
+
+ while (idx < len) {
+ int rlen = (len - idx > 4) ? (4) : (len - idx);
+
+ t[1].rx_buf = &buf[idx];
+ t[1].len = rlen;
+
+ mutex_lock(&flash->lock);
+
+ /* Wait till previous write/erase is done. */
+ if (wait_till_ready(flash)) {
+ /* REVISIT status return?? */
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ /* Set up the write data buffer. */
+ opcode = OPCODE_NORM_READ;
+ flash->command[0] = opcode;
+ m25p_addr2cmd(flash, from + idx, flash->command);
+
+ spi_sync(flash->spi, &m);
+
+ *retlen += m.actual_length - m25p_cmdsz(flash);
+
+ mutex_unlock(&flash->lock);
+ idx += rlen;
+ }
+ return 0;
+}
+
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
@@ -479,6 +531,76 @@ static int m25p80_write(struct mtd_info
return 0;
}
+static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_transfer t;
+ struct spi_message m;
+ u32 i, page_size;
+ u8 tmp[8];
+
+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)to, len);
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = tmp;
+ t.len = 8;
+ spi_message_add_tail(&t, &m);
+
+ mutex_lock(&flash->lock);
+
+ /* Wait until finished previous write command. */
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ write_enable(flash);
+
+ /* Set up the opcode in the write buffer. */
+ flash->command[0] = OPCODE_PP;
+ m25p_addr2cmd(flash, to, flash->command);
+
+ t.len = 4 + (to & 0x3);
+ if (t.len == 4)
+ t.len = 8;
+ memcpy(tmp, flash->command, 4);
+ memcpy(&tmp[4], buf, t.len - 4);
+ spi_sync(flash->spi, &m);
+ page_size = t.len - 4;
+
+ *retlen = m.actual_length - m25p_cmdsz(flash);
+
+ /* write everything in flash->page_size chunks */
+ for (i = page_size; i < len; i += page_size) {
+ page_size = len - i;
+ if (page_size > 4)
+ page_size = 4;
+
+ /* write the next page to flash */
+ m25p_addr2cmd(flash, to + i, flash->command);
+
+ memcpy(tmp, flash->command, 4);
+ memcpy(&tmp[4], buf + i, page_size);
+ t.len = 4 + page_size;
+
+ wait_till_ready(flash);
+
+ write_enable(flash);
+
+ spi_sync(flash->spi, &m);
+
+ *retlen += m.actual_length - m25p_cmdsz(flash);
+ }
+
+ mutex_unlock(&flash->lock);
+
+ return 0;
+}
+
static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -1059,6 +1181,12 @@ static int m25p_probe(struct spi_device
flash->fast_read = true;
#endif
+ if (np && of_property_read_bool(np, "m25p,chunked-io")) {
+ dev_warn(&spi->dev, "using chunked io\n");
+ flash->mtd._read = m25p80_read_chunked;
+ flash->mtd._write = m25p80_write_chunked;
+ }
+
#ifdef CONFIG_M25PXX_USE_FAST_READ
flash->fast_read = true;
#endif

325
target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch
View file

@ -1,325 +0,0 @@
From def7e226d3e5c501180bdc2fc644ff924b5a275e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 23 Jun 2013 00:16:22 +0200
Subject: [PATCH 132/133] GPIO: add gpio_export_with_name
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/133856.html
Signed-off-by: John Crispin <blogic@openwrt.org>
---
Documentation/devicetree/bindings/gpio/gpio.txt | 60 ++++++++++++++++++++
drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++
drivers/gpio/gpiolib.c | 24 +++++---
include/asm-generic/gpio.h | 6 +-
include/linux/gpio.h | 26 ++++++++-
5 files changed, 172 insertions(+), 12 deletions(-)
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -112,3 +112,63 @@ where,
The pinctrl node must have "#gpio-range-cells" property to show number of
arguments to pass with phandle from gpio controllers node.
+
+3) gpio-export
+--------------
+
+gpio-export will allow you to automatically export gpio
+
+required properties:
+- compatible: Should be "gpio-export"
+
+in each child node will reprensent a gpio or if no name is specified
+a list of gpio to export
+
+required properties:
+- gpios: gpio to export
+
+optional properties:
+ - gpio-export,name: export name
+ - gpio-export,output: to set the as output with default value
+ if no present gpio as input
+ - pio-export,direction_may_change: boolean to allow the direction to be controllable
+
+Example:
+
+
+gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ in {
+ gpio-export,name = "in";
+ gpios = <&pioC 20 0>;
+ };
+
+ out {
+ gpio-export,name = "out";
+ gpio-export,output = <1>;
+ gpio-export,direction_may_change;
+ gpios = <&pioC 21 0>;
+ };
+
+ in_out {
+ gpio-export,name = "in_out";
+ gpio-export,direction_may_change;
+ gpios = <&pioC 21 0>;
+ };
+
+ gpios_in {
+ gpios = <&pioB 0 0
+ &pioB 3 0
+ &pioC 4 0>;
+ gpio-export,direction_may_change;
+ };
+
+ gpios_out {
+ gpios = <&pioB 1 0
+ &pioB 2 0
+ &pioC 3 0>;
+ gpio-export,output = <1>;
+ };
+};
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -21,6 +21,8 @@
#include <linux/of_gpio.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
/* Private data structure for of_gpiochip_find_and_xlate */
struct gg_data {
@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip
if (chip->of_node)
of_node_put(chip->of_node);
}
+
+static struct of_device_id gpio_export_ids[] = {
+ { .compatible = "gpio-export" },
+ { /* sentinel */ }
+};
+
+static int __init of_gpio_export_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *cnp;
+ u32 val;
+ int nb = 0;
+
+ for_each_child_of_node(np, cnp) {
+ const char *name = NULL;
+ int gpio;
+ bool dmc;
+ int max_gpio = 1;
+ int i;
+
+ of_property_read_string(cnp, "gpio-export,name", &name);
+
+ if (!name)
+ max_gpio = of_gpio_count(cnp);
+
+ for (i = 0; i < max_gpio; i++) {
+ unsigned flags = 0;
+ enum of_gpio_flags of_flags;
+
+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
+
+ if (of_flags == OF_GPIO_ACTIVE_LOW)
+ flags |= GPIOF_ACTIVE_LOW;
+
+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ else
+ flags |= GPIOF_IN;
+
+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
+ continue;
+
+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
+ gpio_export_with_name(gpio, dmc, name);
+ nb++;
+ }
+ }
+
+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
+
+ return 0;
+}
+
+static struct platform_driver gpio_export_driver = {
+ .driver = {
+ .name = "gpio-export",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpio_export_ids),
+ },
+};
+
+static int __init of_gpio_export_init(void)
+{
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct
static void gpiod_set_value(struct gpio_desc *desc, int value);
static int gpiod_cansleep(const struct gpio_desc *desc);
static int gpiod_to_irq(const struct gpio_desc *desc);
-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
static int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
@@ -674,7 +674,7 @@ static ssize_t export_store(struct class
status = -ENODEV;
goto done;
}
- status = gpiod_export(desc, true);
+ status = gpiod_export(desc, true, NULL);
if (status < 0)
gpiod_free(desc);
else
@@ -736,9 +736,10 @@ static struct class gpio_class = {
/**
- * gpio_export - export a GPIO through sysfs
+ * gpio_export_with_name - export a GPIO through sysfs
* @gpio: gpio to make available, already requested
* @direction_may_change: true if userspace may change gpio direction
+ * @name: gpio name
* Context: arch_initcall or later
*
* When drivers want to make a GPIO accessible to userspace after they
@@ -750,7 +751,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
{
unsigned long flags;
int status;
@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc
goto fail_unlock;
}
+ if (name)
+ ioname = name;
if (!desc->chip->direction_input || !desc->chip->direction_output)
direction_may_change = false;
spin_unlock_irqrestore(&gpio_lock, flags);
@@ -829,11 +832,11 @@ fail_unlock:
return status;
}
-int gpio_export(unsigned gpio, bool direction_may_change)
+int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
{
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
}
-EXPORT_SYMBOL_GPL(gpio_export);
+EXPORT_SYMBOL_GPL(gpio_export_with_name);
static int match_export(struct device *dev, const void *data)
{
@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(str
}
static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
+ bool direction_may_change, const char *name)
{
return -ENOSYS;
}
@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsi
if (flags & GPIOF_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+ if (flags & GPIOF_ACTIVE_LOW)
+ set_bit(FLAG_ACTIVE_LOW, &gpio_desc[gpio].flags);
+
if (flags & GPIOF_DIR_IN)
err = gpiod_direction_input(desc);
else
@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsi
goto free_gpio;
if (flags & GPIOF_EXPORT) {
- err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE);
+ err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE, NULL);
if (err)
goto free_gpio;
}
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
-extern int gpio_export(unsigned gpio, bool direction_may_change);
+extern int gpio_export_with_name(unsigned gpio, bool direction_may_change,
+ const char *name);
extern int gpio_export_link(struct device *dev, const char *name,
unsigned gpio);
extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
@@ -284,7 +285,8 @@ struct device;
/* sysfs support is only available with gpiolib, where it's optional */
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
+static inline int gpio_export_with_name(unsigned gpio,
+ bool direction_may_change, const char *name)
{
return -ENOSYS;
}
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -27,6 +27,9 @@
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
+#define GPIOF_ACTIVE_LOW (1 << 6)
+
+
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansle
WARN_ON(1);
}
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
+static inline int gpio_export_with_name(unsigned gpio,
+ bool direction_may_change, const char *name)
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device
unsigned long flags, const char *label);
void devm_gpio_free(struct device *dev, unsigned int gpio);
+/**
+ * gpio_export - export a GPIO through sysfs
+ * @gpio: gpio to make available, already requested
+ * @direction_may_change: true if userspace may change gpio direction
+ * Context: arch_initcall or later
+ *
+ * When drivers want to make a GPIO accessible to userspace after they
+ * have requested it -- perhaps while debugging, or as part of their
+ * public interface -- they may use this routine. If the GPIO can
+ * change direction (some can't) and the caller allows it, userspace
+ * will see "direction" sysfs attribute which may be used to change
+ * the gpio's direction. A "value" attribute will always be provided.
+ *
+ * Returns zero on success, else an error.
+ */
+static inline int gpio_export(unsigned gpio,bool direction_may_change)
+{
+ return gpio_export_with_name(gpio, direction_may_change, NULL);
+}
+
#endif /* __LINUX_GPIO_H */

246
target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch
View file

@ -1,246 +0,0 @@
From 935815cd3b9690b86e70a18fb755f70becb57cc6 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 19 Sep 2013 01:50:59 +0200
Subject: [PATCH 133/133] uvc: add iPassion iP2970 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/media/usb/uvc/uvc_driver.c | 14 ++++
drivers/media/usb/uvc/uvc_status.c | 2 +
drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
drivers/media/usb/uvc/uvcvideo.h | 3 +
4 files changed, 166 insertions(+)
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2420,6 +2420,20 @@ static struct usb_device_id uvc_ids[] =
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
+
+/* iPassion iP2970 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x1B3B,
+ .idProduct = 0x2970,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX
+ | UVC_QUIRK_STREAM_NO_FID
+ | UVC_QUIRK_MOTION
+ | UVC_QUIRK_SINGLE_ISO },
+
/* Generic USB Video Class */
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
{}
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
switch (dev->status[0] & 0x0f) {
case UVC_STATUS_TYPE_CONTROL:
uvc_event_control(dev, dev->status, len);
+ dev->motion = 1;
break;
case UVC_STATUS_TYPE_STREAMING:
@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
+ dev->motion = 0;
/* For high-speed interrupt endpoints, the bInterval value is used as
* an exponent of two. Some developers forgot about it.
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -21,6 +21,11 @@
#include <linux/wait.h>
#include <linux/atomic.h>
#include <asm/unaligned.h>
+#include <linux/skbuff.h>
+#include <linux/kobject.h>
+#include <linux/netlink.h>
+#include <linux/kobject.h>
+#include <linux/workqueue.h>
#include <media/v4l2-common.h>
@@ -1074,9 +1079,149 @@ static void uvc_video_decode_data(struct
}
}
+struct bh_priv {
+ unsigned long seen;
+};
+
+struct bh_event {
+ const char *name;
+ struct sk_buff *skb;
+ struct work_struct work;
+};
+
+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
+#define BH_DBG(fmt, args...) do {} while (0)
+#define BH_SKB_SIZE 2048
+
+extern u64 uevent_next_seqnum(void);
+static int seen = 0;
+
+static int bh_event_add_var(struct bh_event *event, int argv,
+ const char *format, ...)
+{
+ static char buf[128];
+ char *s;
+ va_list args;
+ int len;
+
+ if (argv)
+ return 0;
+
+ va_start(args, format);
+ len = vsnprintf(buf, sizeof(buf), format, args);
+ va_end(args);
+
+ if (len >= sizeof(buf)) {
+ BH_ERR("buffer size too small\n");
+ WARN_ON(1);
+ return -ENOMEM;
+ }
+
+ s = skb_put(event->skb, len + 1);
+ strcpy(s, buf);
+
+ BH_DBG("added variable '%s'\n", s);
+
+ return 0;
+}
+
+static int motion_hotplug_fill_event(struct bh_event *event)
+{
+ int s = jiffies;
+ int ret;
+
+ if (!seen)
+ seen = jiffies;
+
+ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
+ if (ret)
+ return ret;
+
+ ret = bh_event_add_var(event, 0, "PATH=%s",
+ "/sbin:/bin:/usr/sbin:/usr/bin");
+ if (ret)
+ return ret;
+
+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
+ if (ret)
+ return ret;
+
+ ret = bh_event_add_var(event, 0, "ACTION=motion");
+ if (ret)
+ return ret;
+
+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
+ if (ret)
+ return ret;
+ seen = s;
+
+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
+
+ return ret;
+}
+
+static void motion_hotplug_work(struct work_struct *work)
+{
+ struct bh_event *event = container_of(work, struct bh_event, work);
+ int ret = 0;
+
+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
+ if (!event->skb)
+ goto out_free_event;
+
+ ret = bh_event_add_var(event, 0, "%s@", "add");
+ if (ret)
+ goto out_free_skb;
+
+ ret = motion_hotplug_fill_event(event);
+ if (ret)
+ goto out_free_skb;
+
+ NETLINK_CB(event->skb).dst_group = 1;
+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
+
+out_free_skb:
+ if (ret) {
+ BH_ERR("work error %d\n", ret);
+ kfree_skb(event->skb);
+ }
+out_free_event:
+ kfree(event);
+}
+
+static int motion_hotplug_create_event(void)
+{
+ struct bh_event *event;
+
+ event = kzalloc(sizeof(*event), GFP_KERNEL);
+ if (!event)
+ return -ENOMEM;
+
+ event->name = "motion";
+
+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
+ schedule_work(&event->work);
+
+ return 0;
+}
+
+#define MOTION_FLAG_OFFSET 4
static void uvc_video_decode_end(struct uvc_streaming *stream,
struct uvc_buffer *buf, const __u8 *data, int len)
{
+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
+ u8 *mem;
+ buf->state = UVC_BUF_STATE_READY;
+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
+ if ( stream->dev->motion ) {
+ stream->dev->motion = 0;
+ motion_hotplug_create_event();
+ } else {
+ *mem &= 0x7f;
+ }
+ }
+
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
@@ -1477,6 +1622,8 @@ static int uvc_init_video_isoc(struct uv
if (npackets == 0)
return -ENOMEM;
+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
+ npackets = 1;
size = npackets * psize;
for (i = 0; i < UVC_URBS; ++i) {
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -137,6 +137,8 @@
#define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
#define UVC_QUIRK_PROBE_DEF 0x00000100
#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
+#define UVC_QUIRK_MOTION 0x00000400
+#define UVC_QUIRK_SINGLE_ISO 0x00000800
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
@@ -538,6 +540,7 @@ struct uvc_device {
__u8 *status;
struct input_dev *input;
char input_phys[64];
+ int motion;
};
enum uvc_handle_state {

13
target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch
View file

@ -1,13 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -805,10 +805,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
- len = mtd_pad_erasesize(master, part->offset, len);
- if (len + master->erasesize > part->mtd.size)
- return;
-
__mtd_add_partition(master, "rootfs", part->offset + len,
part->mtd.size - len, false);
}

28
target/linux/ramips/patches-3.10/0135-mtd-add-rtn56u-support.patch
View file

@ -1,28 +0,0 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -793,8 +793,11 @@ static void split_uimage(struct mtd_info
{
struct {
__be32 magic;
- __be32 pad[2];
+ __be32 pad0[2];
__be32 size;
+ __be32 pad1[4];
+ __be32 name[7];
+ __be32 kern_size;
} hdr;
size_t len;
@@ -804,7 +807,11 @@ static void split_uimage(struct mtd_info
if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
return;
- len = be32_to_cpu(hdr.size) + 0x40;
+ if (hdr.kern_size != 0 && hdr.name[0] == 0)
+ len = be32_to_cpu(hdr.kern_size);
+ else
+ len = be32_to_cpu(hdr.size) + 0x40;
+
__mtd_add_partition(master, "rootfs", part->offset + len,
part->mtd.size - len, false);
}

60
target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch
View file

@ -1,60 +0,0 @@
From f281fdccbb3e762d293e6eef7f291a33b84e0f6a Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 20 Jun 2013 14:56:17 +0200
Subject: [PATCH 200/215] MIPS: Fix TLBR-use hazards for R2 cores in the TLB
reload handlers
MIPS R2 documents state that an execution hazard barrier is needed
after a TLBR before reading EntryLo.
Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5526/
(cherry picked from commit 73acc7df534ff458a81435178dab3ea037ed6d78)
---
arch/mips/mm/tlbex.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1935,6 +1935,19 @@ static void __cpuinit build_r4000_tlb_lo
uasm_i_nop(&p);
uasm_i_tlbr(&p);
+
+ switch (current_cpu_type()) {
+ default:
+ if (cpu_has_mips_r2) {
+ uasm_i_ehb(&p);
+
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ break;
+ }
+ }
+
/* Examine entrylo 0 or 1 based on ptr. */
if (use_bbit_insns()) {
uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8);
@@ -1989,6 +2002,19 @@ static void __cpuinit build_r4000_tlb_lo
uasm_i_nop(&p);
uasm_i_tlbr(&p);
+
+ switch (current_cpu_type()) {
+ default:
+ if (cpu_has_mips_r2) {
+ uasm_i_ehb(&p);
+
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ break;
+ }
+ }
+
/* Examine entrylo 0 or 1 based on ptr. */
if (use_bbit_insns()) {
uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8);

44
target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch
View file

@ -1,44 +0,0 @@
From cde59bef2f155fc38413e470ff0e4672623cdbec Mon Sep 17 00:00:00 2001
From: Tony Wu <tung7970@gmail.com>
Date: Fri, 21 Jun 2013 10:13:08 +0000
Subject: [PATCH 201/215] MIPS: GIC: Fix gic_set_affinity infinite loop
There is an infinite loop in gic_set_affinity. When irq_set_affinity
gets called on gic controller, it blocks forever.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5537/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit c214c03512b67e56dea3f4471705f8caae49553a)
---
arch/mips/kernel/irq-gic.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -219,16 +219,15 @@ static int gic_set_affinity(struct irq_d
/* Assumption : cpumask refers to a single CPU */
spin_lock_irqsave(&gic_lock, flags);
- for (;;) {
- /* Re-route this IRQ */
- GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
- /* Update the pcpu_masks */
- for (i = 0; i < NR_CPUS; i++)
- clear_bit(irq, pcpu_masks[i].pcpu_mask);
- set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
+ /* Re-route this IRQ */
+ GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
+
+ /* Update the pcpu_masks */
+ for (i = 0; i < NR_CPUS; i++)
+ clear_bit(irq, pcpu_masks[i].pcpu_mask);
+ set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
- }
cpumask_copy(d->affinity, cpumask);
spin_unlock_irqrestore(&gic_lock, flags);

52
target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch
View file

@ -1,52 +0,0 @@
From 46b62174f655edf6a4befae7f9871c431146b1b6 Mon Sep 17 00:00:00 2001
From: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Date: Wed, 11 Sep 2013 14:17:47 -0500
Subject: [PATCH 202/215] MIPS: Fix SMP core calculations when using MT
support.
The TCBIND register is only available if the core has MT support. It
should not be read otherwise. Secondly, the number of TCs (siblings)
are calculated differently depending on if the kernel is configured
as SMVP or SMTC.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5822/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 670bac3a8c201fc1f5f92ac6b4a8b42dc8172937)
---
arch/mips/kernel/smp-cmp.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
c->core = (read_c0_ebase() >> 1) & 0x1ff;
#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
- c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
+ if (cpu_has_mipsmt)
+ c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
+ TCBIND_CURVPE;
#endif
#ifdef CONFIG_MIPS_MT_SMTC
c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
@@ -177,9 +179,16 @@ void __init cmp_smp_setup(void)
}
if (cpu_has_mipsmt) {
- unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
+ unsigned int nvpe = 1;
+#ifdef CONFIG_MIPS_MT_SMP
+ unsigned int mvpconf0 = read_c0_mvpconf0();
+
+ nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+#elif defined(CONFIG_MIPS_MT_SMTC)
+ unsigned int mvpconf0 = read_c0_mvpconf0();
nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+#endif
smp_num_siblings = nvpe;
}
pr_info("Detected %i available secondary CPU(s)\n", ncpu);

84
target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch
View file

@ -1,84 +0,0 @@
From 871d1be8c3ce46b8ef395b56cd0e37cede10e76a Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 17 Sep 2013 12:44:31 +0200
Subject: [PATCH 203/215] MIPS: Fix accessing to per-cpu data when flushing
the cache
This fixes the following issue
BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
caller is blast_dcache32+0x30/0x254
Call Trace:
[<8047f02c>] dump_stack+0x8/0x34
[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
[<80114d94>] blast_dcache32+0x30/0x254
[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
[<80110ff0>] mips_dma_map_sg+0x108/0x180
[<80355098>] ide_dma_prepare+0xf0/0x1b8
[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
[<8035951c>] ide_do_rw_disk+0x298/0x3e4
[<8034a3c4>] do_ide_request+0x2e0/0x704
[<802bb0dc>] __blk_run_queue+0x44/0x64
[<802be000>] queue_unplugged.isra.36+0x1c/0x54
[<802beb94>] blk_flush_plug_list+0x18c/0x24c
[<802bec6c>] blk_finish_plug+0x18/0x48
[<8026554c>] journal_commit_transaction+0x3b8/0x151c
[<80269648>] kjournald+0xec/0x238
[<8014ac00>] kthread+0xb8/0xc0
[<8010268c>] ret_from_kernel_thread+0x14/0x1c
Caches in most systems are identical - but not always, so we can't avoid
the use of smp_call_function() by just looking at the boot CPU's data,
have to fiddle with preemption instead.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5835
(cherry picked from commit ff522058bd717506b2fa066fa564657f2b86477e)
---
arch/mips/mm/c-r4k.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -12,6 +12,7 @@
#include <linux/highmem.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
+#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
@@ -601,6 +602,7 @@ static void r4k_dma_cache_wback_inv(unsi
/* Catch bad driver code */
BUG_ON(size == 0);
+ preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
@@ -621,6 +623,7 @@ static void r4k_dma_cache_wback_inv(unsi
R4600_HIT_CACHEOP_WAR_IMPL;
blast_dcache_range(addr, addr + size);
}
+ preempt_enable();
bc_wback_inv(addr, size);
__sync();
@@ -631,6 +634,7 @@ static void r4k_dma_cache_inv(unsigned l
/* Catch bad driver code */
BUG_ON(size == 0);
+ preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
@@ -655,6 +659,7 @@ static void r4k_dma_cache_inv(unsigned l
R4600_HIT_CACHEOP_WAR_IMPL;
blast_inv_dcache_range(addr, addr + size);
}
+ preempt_enable();
bc_inv(addr, size);
__sync();

60
target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch
View file

@ -1,60 +0,0 @@
From 3da3528448850ccde412d52fb939575641ada80d Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Wed, 18 Sep 2013 19:08:15 +0100
Subject: [PATCH 204/215] MIPS: 74K/1074K: Correct erratum workaround.
Make sure 74K revision numbers are not applied to the 1074K. Also catch
invalid usage.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5857/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit 9213ad77070ea75fc3a5e43e3d9e9c4146e4930a)
---
arch/mips/mm/c-r4k.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -785,20 +785,30 @@ static inline void rm7k_erratum31(void)
static inline void alias_74k_erratum(struct cpuinfo_mips *c)
{
+ unsigned int imp = c->processor_id & 0xff00;
+ unsigned int rev = c->processor_id & PRID_REV_MASK;
+
/*
* Early versions of the 74K do not update the cache tags on a
* vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
* aliases. In this case it is better to treat the cache as always
* having aliases.
*/
- if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
- c->dcache.flags |= MIPS_CACHE_VTAG;
- if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
- if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
- ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
- c->dcache.flags |= MIPS_CACHE_VTAG;
- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+ switch (imp) {
+ case PRID_IMP_74K:
+ if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
+ c->dcache.flags |= MIPS_CACHE_VTAG;
+ if (rev == PRID_REV_ENCODE_332(2, 4, 0))
+ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+ break;
+ case PRID_IMP_1074K:
+ if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
+ c->dcache.flags |= MIPS_CACHE_VTAG;
+ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+ }
+ break;
+ default:
+ BUG();
}
}

101
target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch
View file

@ -1,101 +0,0 @@
From 5a43b20db2fd18f8ea5f3a919d4bc9d9c2038c6c Mon Sep 17 00:00:00 2001
From: "Steven J. Hill" <Steven.Hill@imgtec.com>
Date: Wed, 25 Sep 2013 14:58:19 -0500
Subject: [PATCH 205/215] MIPS: GIC: Send IPIs using the GIC.
If a GIC present, then use it to send IPIs between the cores.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
---
arch/mips/kernel/smp-mt.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -71,6 +71,7 @@ static unsigned int __init smvp_vpe_init
/* Record this as available CPU */
set_cpu_possible(tc, true);
+ set_cpu_present(tc, true);
__cpu_number_map[tc] = ++ncpu;
__cpu_logical_map[ncpu] = tc;
}
@@ -112,12 +113,35 @@ static void __init smvp_tc_init(unsigned
write_tc_c0_tchalt(TCHALT_H);
}
+static void mp_send_ipi_single(int cpu, unsigned int action)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch (action) {
+ case SMP_CALL_FUNCTION:
+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
+ break;
+
+ case SMP_RESCHEDULE_YOURSELF:
+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
+ break;
+ }
+
+ local_irq_restore(flags);
+}
+
static void vsmp_send_ipi_single(int cpu, unsigned int action)
{
int i;
unsigned long flags;
int vpflags;
+ if (gic_present) {
+ mp_send_ipi_single(cpu, action);
+ return;
+ }
local_irq_save(flags);
vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */
@@ -164,6 +188,8 @@ static void __cpuinit vsmp_init_secondar
static void __cpuinit vsmp_smp_finish(void)
{
+ pr_debug("SMPMT: CPU%d: vsmp_smp_finish\n", smp_processor_id());
+
/* CDFIXME: remove this? */
write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
@@ -178,6 +204,7 @@ static void __cpuinit vsmp_smp_finish(vo
static void vsmp_cpus_done(void)
{
+ pr_debug("SMPMT: CPU%d: vsmp_cpus_done\n", smp_processor_id());
}
/*
@@ -191,6 +218,8 @@ static void vsmp_cpus_done(void)
static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
{
struct thread_info *gp = task_thread_info(idle);
+ pr_debug("SMPMT: CPU%d: vsmp_boot_secondary cpu %d\n",
+ smp_processor_id(), cpu);
dvpe();
set_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -232,6 +261,7 @@ static void __init vsmp_smp_setup(void)
unsigned int mvpconf0, ntc, tc, ncpu = 0;
unsigned int nvpe;
+ pr_debug("SMPMT: CPU%d: vsmp_smp_setup\n", smp_processor_id());
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
if (cpu_has_fpu)
@@ -272,6 +302,8 @@ static void __init vsmp_smp_setup(void)
static void __init vsmp_prepare_cpus(unsigned int max_cpus)
{
+ pr_debug("SMPMT: CPU%d: vsmp_prepare_cpus %d\n",
+ smp_processor_id(), max_cpus);
mips_mt_set_cpuoptions();
}

723
target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch
View file

@ -1,723 +0,0 @@
From 259ce690b20562aa5dfef711e72ed02a4f514ce4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:19:37 +0000
Subject: [PATCH 206/215] MIPS: ralink: add MT7621 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/gic.h | 2 +
arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++
arch/mips/kernel/vmlinux.lds.S | 1 +
arch/mips/ralink/Kconfig | 18 ++
arch/mips/ralink/Makefile | 7 +-
arch/mips/ralink/Platform | 7 +
arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++
arch/mips/ralink/malta-amon.c | 81 +++++++++
arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++
9 files changed, 608 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h
create mode 100644 arch/mips/ralink/irq-gic.c
create mode 100644 arch/mips/ralink/malta-amon.c
create mode 100644 arch/mips/ralink/mt7621.c
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -19,7 +19,11 @@
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#define GIC_NUM_INTRS 64
+
+#ifndef GIC_NUM_INTRS
#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
+#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,39 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _MT7621_REGS_H_
+#define _MT7621_REGS_H_
+
+#define MT7621_SYSC_BASE 0x1E000000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_REV 0x0c
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+
+#define CHIP_REV_PKG_MASK 0x1
+#define CHIP_REV_PKG_SHIFT 16
+#define CHIP_REV_VER_MASK 0xf
+#define CHIP_REV_VER_SHIFT 8
+#define CHIP_REV_ECO_MASK 0xf
+
+#define MT7621_DRAM_BASE 0x0
+#define MT7621_DDR2_SIZE_MIN 32
+#define MT7621_DDR2_SIZE_MAX 256
+
+#define MT7621_CHIP_NAME0 0x3637544D
+#define MT7621_CHIP_NAME1 0x20203132
+
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@ SECTIONS
/* read-only */
_text = .; /* Text and read-only data */
.text : {
+ /*. = . + 0x8000; */
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -7,6 +7,11 @@ config CLKEVT_RT3352
select CLKSRC_OF
select CLKSRC_MMIO
+config IRQ_INTC
+ bool
+ default y
+ depends on !SOC_MT7621
+
choice
prompt "Ralink SoC selection"
default SOC_RT305X
@@ -35,6 +40,15 @@ choice
select USB_ARCH_HAS_EHCI
select HW_HAS_PCI
+ config SOC_MT7621
+ bool "MT7621"
+ select MIPS_CPU_SCACHE
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_MIPS_CMP
+ select IRQ_GIC
+ select HW_HAS_PCI
+
endchoice
choice
@@ -62,6 +76,10 @@ choice
bool "MT7620A eval kit"
depends on SOC_MT7620
+ config DTB_MT7621_EVAL
+ bool "MT7621 eval kit"
+ depends on SOC_MT7621
+
endchoice
endif
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,21 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-y := prom.o of.o reset.o clk.o timer.o
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_IRQ_GIC) += irq-gic.o
+obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o
+
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -26,3 +26,10 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
# Ralink MT7620
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
+cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+#
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,271 @@
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/hardirq.h>
+#include <linux/preempt.h>
+#include <linux/irqdomain.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+
+#include <asm/gic.h>
+#include <asm/gcmpregs.h>
+
+#include <asm/mach-ralink/mt7621.h>
+
+unsigned long _gcmp_base;
+static int gic_resched_int_base = 56;
+static int gic_call_int_base = 60;
+static struct irq_chip *irq_gic;
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS];
+
+#if defined(CONFIG_MIPS_MT_SMP)
+static int gic_resched_int_base;
+static int gic_call_int_base;
+
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+ scheduler_ipi();
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+ipi_call_interrupt(int irq, void *dev_id)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = IRQF_DISABLED|IRQF_PERCPU,
+ .name = "ipi resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = IRQF_DISABLED|IRQF_PERCPU,
+ .name = "ipi call"
+};
+
+#endif
+
+static void __init
+gic_fill_map(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
+ gic_intr_map[i].cpunum = 0;
+ gic_intr_map[i].pin = GIC_CPU_INT0;
+ gic_intr_map[i].polarity = GIC_POL_POS;
+ gic_intr_map[i].trigtype = GIC_TRIG_LEVEL;
+ gic_intr_map[i].flags = GIC_FLAG_IPI;
+ }
+
+#if defined(CONFIG_MIPS_MT_SMP)
+ {
+ int cpu;
+
+ gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids;
+ gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
+
+ i = gic_resched_int_base;
+
+ for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+ gic_intr_map[i + cpu].cpunum = cpu;
+ gic_intr_map[i + cpu].pin = GIC_CPU_INT1;
+ gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE;
+
+ gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu;
+ gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2;
+ gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE;
+ }
+ }
+#endif
+}
+
+void
+gic_irq_ack(struct irq_data *d)
+{
+ int irq = (d->irq - gic_irq_base);
+
+ GIC_CLR_INTR_MASK(irq);
+
+ if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
+ GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
+}
+
+void
+gic_finish_irq(struct irq_data *d)
+{
+ GIC_SET_INTR_MASK(d->irq - gic_irq_base);
+}
+
+void __init
+gic_platform_init(int irqs, struct irq_chip *irq_controller)
+{
+ irq_gic = irq_controller;
+}
+
+static void
+gic_irqdispatch(void)
+{
+ unsigned int irq = gic_get_int();
+
+ if (likely(irq < GIC_NUM_INTRS))
+ do_IRQ(MIPS_GIC_IRQ_BASE + irq);
+ else {
+ pr_err("Spurious GIC Interrupt!\n");
+ spurious_interrupt();
+ }
+
+}
+
+static void
+vi_timer_irqdispatch(void)
+{
+ do_IRQ(cp0_compare_irq);
+}
+
+#if defined(CONFIG_MIPS_MT_SMP)
+unsigned int
+plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return GIC_CALL_INT(cpu);
+}
+
+unsigned int
+plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return GIC_RESCHED_INT(cpu);
+}
+#endif
+
+asmlinkage void
+plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+ if (unlikely(!pending)) {
+ pr_err("Spurious CP0 Interrupt!\n");
+ spurious_interrupt();
+ } else {
+ if (pending & CAUSEF_IP7)
+ do_IRQ(cp0_compare_irq);
+
+ if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2))
+ gic_irqdispatch();
+ }
+}
+
+unsigned int __cpuinit
+get_c0_compare_int(void)
+{
+ return CP0_LEGACY_COMPARE_IRQ;
+}
+
+static int
+gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, irq_gic,
+#if defined(CONFIG_MIPS_MT_SMP)
+ (hw >= gic_resched_int_base) ?
+ handle_percpu_irq :
+#endif
+ handle_level_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = gic_map,
+};
+
+static int __init
+of_gic_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain;
+ struct resource gcmp = { 0 }, gic = { 0 };
+ unsigned int gic_rev;
+ int i;
+
+ if (of_address_to_resource(node, 0, &gic))
+ panic("Failed to get gic memory range");
+ if (request_mem_region(gic.start, resource_size(&gic),
+ gic.name) < 0)
+ panic("Failed to request gic memory");
+ if (of_address_to_resource(node, 2, &gcmp))
+ panic("Failed to get gic memory range");
+ if (request_mem_region(gcmp.start, resource_size(&gcmp),
+ gcmp.name) < 0)
+ panic("Failed to request gcmp memory");
+
+ _gcmp_base = (unsigned long) ioremap_nocache(gcmp.start, resource_size(&gcmp));
+ if (!_gcmp_base)
+ panic("Failed to remap gcmp memory\n");
+
+ if ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) != gcmp.start)
+ panic("Failed to find gcmp core\n");
+
+ /* tell the gcmp where to find the gic */
+ GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK;
+ gic_present = 1;
+ if (cpu_has_vint) {
+ set_vi_handler(2, gic_irqdispatch);
+ set_vi_handler(3, gic_irqdispatch);
+ set_vi_handler(4, gic_irqdispatch);
+ set_vi_handler(7, vi_timer_irqdispatch);
+ }
+
+ gic_fill_map();
+
+ gic_init(gic.start, resource_size(&gic), gic_intr_map,
+ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+
+ GICREAD(GIC_REG(SHARED, GIC_SH_REVISIONID), gic_rev);
+ pr_info("gic: revision %d.%d\n", (gic_rev >> 8) & 0xff, gic_rev & 0xff);
+
+ domain = irq_domain_add_legacy(node, GIC_NUM_INTRS, MIPS_GIC_IRQ_BASE,
+ 0, &irq_domain_ops, NULL);
+ if (!domain)
+ panic("Failed to add irqdomain");
+
+#if defined(CONFIG_MIPS_MT_SMP)
+ for (i = 0; i < nr_cpu_ids; i++) {
+ setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched);
+ setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call);
+ }
+#endif
+
+ change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 |
+ STATUSF_IP2);
+ return 0;
+}
+
+static struct of_device_id __initdata of_irq_ids[] = {
+ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+ { .compatible = "ralink,mt7621-gic", .data = of_gic_init },
+ {},
+};
+
+void __init
+arch_init_irq(void)
+{
+ of_irq_init(of_irq_ids);
+}
--- /dev/null
+++ b/arch/mips/ralink/malta-amon.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * All rights reserved.
+
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Arbitrary Monitor interface
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/addrspace.h>
+#include <asm/mips-boards/launch.h>
+#include <asm/mipsmtregs.h>
+
+int amon_cpu_avail(int cpu)
+{
+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
+
+ if (cpu < 0 || cpu >= NCPULAUNCH) {
+ pr_debug("avail: cpu%d is out of range\n", cpu);
+ return 0;
+ }
+
+ launch += cpu;
+ if (!(launch->flags & LAUNCH_FREADY)) {
+ pr_debug("avail: cpu%d is not ready\n", cpu);
+ return 0;
+ }
+ if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
+ pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
+ return 0;
+ }
+
+ return 1;
+}
+
+void amon_cpu_start(int cpu,
+ unsigned long pc, unsigned long sp,
+ unsigned long gp, unsigned long a0)
+{
+ volatile struct cpulaunch *launch =
+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
+
+ if (!amon_cpu_avail(cpu))
+ return;
+ if (cpu == smp_processor_id()) {
+ pr_debug("launch: I am cpu%d!\n", cpu);
+ return;
+ }
+ launch += cpu;
+
+ pr_debug("launch: starting cpu%d\n", cpu);
+
+ launch->pc = pc;
+ launch->gp = gp;
+ launch->sp = sp;
+ launch->a0 = a0;
+
+ smp_wmb(); /* Target must see parameters before go */
+ launch->flags |= LAUNCH_FGO;
+ smp_wmb(); /* Target must see go before we poll */
+
+ while ((launch->flags & LAUNCH_FGONE) == 0)
+ ;
+ smp_rmb(); /* Target will be updating flags soon */
+ pr_debug("launch: cpu%d gone!\n", cpu);
+}
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/gcmpregs.h>
+
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include <pinmux.h>
+
+#include "common.h"
+
+#define SYSC_REG_SYSCFG 0x10
+#define SYSC_REG_CPLL_CLKCFG0 0x2c
+#define SYSC_REG_CUR_CLK_STS 0x44
+#define CPU_CLK_SEL (BIT(30) | BIT(31))
+
+#define MT7621_GPIO_MODE_UART1 1
+#define MT7621_GPIO_MODE_I2C 2
+#define MT7621_GPIO_MODE_UART2 3
+#define MT7621_GPIO_MODE_UART3 5
+#define MT7621_GPIO_MODE_JTAG 7
+#define MT7621_GPIO_MODE_WDT_MASK 0x3
+#define MT7621_GPIO_MODE_WDT_SHIFT 8
+#define MT7621_GPIO_MODE_WDT_GPIO 1
+#define MT7621_GPIO_MODE_PCIE_RST 0
+#define MT7621_GPIO_MODE_PCIE_REF 2
+#define MT7621_GPIO_MODE_PCIE_MASK 0x3
+#define MT7621_GPIO_MODE_PCIE_SHIFT 10
+#define MT7621_GPIO_MODE_PCIE_GPIO 1
+#define MT7621_GPIO_MODE_MDIO 12
+#define MT7621_GPIO_MODE_RGMII1 14
+#define MT7621_GPIO_MODE_RGMII2 15
+#define MT7621_GPIO_MODE_SPI_MASK 0x3
+#define MT7621_GPIO_MODE_SPI_SHIFT 16
+#define MT7621_GPIO_MODE_SPI_GPIO 1
+#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
+#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
+#define MT7621_GPIO_MODE_SDHCI_GPIO 1
+
+static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
+static struct rt2880_pmx_func uart3_grp[] = { FUNC("uart3", 0, 5, 4) };
+static struct rt2880_pmx_func uart2_grp[] = { FUNC("uart2", 0, 9, 4) };
+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct rt2880_pmx_func wdt_grp[] = {
+ FUNC("wdt rst", 0, 18, 1),
+ FUNC("wdt refclk", 2, 18, 1),
+};
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
+ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
+};
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct rt2880_pmx_func spi_grp[] = {
+ FUNC("spi", 0, 34, 7),
+ FUNC("nand", 2, 34, 8),
+};
+static struct rt2880_pmx_func sdhci_grp[] = {
+ FUNC("sdhci", 0, 41, 8),
+ FUNC("nand", 2, 41, 8),
+};
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+
+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
+ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
+ GRP("uart3", uart2_grp, 1, MT7621_GPIO_MODE_UART2),
+ GRP("uart2", uart3_grp, 1, MT7621_GPIO_MODE_UART3),
+ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
+ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
+ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
+ GRP("mdio", mdio_grp, 1, MT7621_GPIO_MODE_MDIO),
+ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
+ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
+ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
+ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+ { 0 }
+};
+
+void __init ralink_clk_init(void)
+{
+ int cpu_fdiv = 0;
+ int cpu_ffrac = 0;
+ int fbdiv = 0;
+ u32 clk_sts, syscfg;
+ u8 clk_sel = 0, xtal_mode;
+ u32 cpu_clk;
+
+ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+ clk_sel = 1;
+
+ switch (clk_sel) {
+ case 0:
+ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+ cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+ cpu_ffrac = (clk_sts & 0x1F);
+ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
+ break;
+
+ case 1:
+ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+ xtal_mode = (syscfg >> 6) & 0x7;
+ if(xtal_mode >= 6) { //25Mhz Xtal
+ cpu_clk = 25 * fbdiv * 1000 * 1000;
+ } else if(xtal_mode >=3) { //40Mhz Xtal
+ cpu_clk = 40 * fbdiv * 1000 * 1000;
+ } else { // 20Mhz Xtal
+ cpu_clk = 20 * fbdiv * 1000 * 1000;
+ }
+ break;
+ }
+ cpu_clk = 880000000;
+ ralink_clk_add("cpu", cpu_clk);
+ ralink_clk_add("1e000b00.spi", 50000000);
+ ralink_clk_add("1e000c00.uartlite", 50000000);
+ ralink_clk_add("1e000d00.uart", 50000000);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+ unsigned char *name = NULL;
+ u32 n0;
+ u32 n1;
+ u32 rev;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
+ name = "MT7621";
+ soc_info->compatible = "mtk,mt7621-soc";
+ } else {
+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Mediatek %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+
+ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+ soc_info->mem_base = MT7621_DRAM_BASE;
+
+ rt2880_pinmux_data = mt7621_pinmux_data;
+
+ if (register_cmp_smp_ops())
+ panic("failed to register_vsmp_smp_ops()");
+}
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_RALINK_IRQ_H
+#define __ASM_MACH_RALINK_IRQ_H
+
+#define GIC_NUM_INTRS 64
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif

211
target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch
View file

@ -1,211 +0,0 @@
From 29b1c70ab171609fee58ef6642086d571c0ba0c2 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 27 Jan 2014 13:12:41 +0000
Subject: [PATCH 207/215] MIPS: ralink: add MT7621 defconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++
1 file changed, 197 insertions(+)
create mode 100644 arch/mips/configs/mt7621_defconfig
--- /dev/null
+++ b/arch/mips/configs/mt7621_defconfig
@@ -0,0 +1,197 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FANOUT=32
+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
+CONFIG_INITRAMFS_ROOT_UID=1000
+CONFIG_INITRAMFS_ROOT_GID=1000
+# CONFIG_RD_GZIP is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_SCHED_SMT=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+# CONFIG_SECCOMP is not set
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_RAW=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_HAMRADIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_SWCONFIG=y
+CONFIG_PPP=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_ISDN=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SPI=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_VGA_ARB is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_MT7621_XHCI_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_PHY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_STAGING=y
+CONFIG_USB_DWC2=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_ZLIB is not set
+CONFIG_SQUASHFS_XZ=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32_SARWATE=y
+# CONFIG_XZ_DEC_X86 is not set
+CONFIG_AVERAGE=y

300
target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch
View file

@ -1,300 +0,0 @@
From dd4f939bb7c30f9256a35d31de673241ead350ab Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 24 Jan 2014 17:01:22 +0100
Subject: [PATCH 208/215] MIPS: ralink: add MT7621 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/dts/Makefile | 1 +
arch/mips/ralink/dts/mt7621.dtsi | 257 ++++++++++++++++++++++++++++++++++
arch/mips/ralink/dts/mt7621_eval.dts | 16 +++
3 files changed, 274 insertions(+)
create mode 100644 arch/mips/ralink/dts/mt7621.dtsi
create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
+obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7621.dtsi
@@ -0,0 +1,257 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mtk7620a-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@1E000000 {
+ compatible = "palmbus";
+ reg = <0x1E000000 0x100000>;
+ ranges = <0x0 0x1E000000 0x0FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "mtk,mt7621-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ wdt@100 {
+ compatible = "mtk,mt7621-wdt";
+ reg = <0x100 0x100>;
+ };
+
+ gpio@600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "mtk,mt7621-gpio";
+ reg = <0x600 0x100>;
+
+ gpio0: bank@0 {
+ reg = <0>;
+ compatible = "mtk,mt7621-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: bank@1 {
+ reg = <1>;
+ compatible = "mtk,mt7621-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio2: bank@2 {
+ reg = <2>;
+ compatible = "mtk,mt7621-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ memc@5000 {
+ compatible = "mtk,mt7621-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <26>;
+
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ no-loopback-test;
+ };
+
+ uart@d00 {
+ compatible = "ns16550a";
+ reg = <0xd00 0x100>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <27>;
+
+ fifo-size = <16>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ no-loopback-test;
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ compatible = "ralink,mt7621-spi";
+ reg = <0xb00 0x100>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+/* pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>;*/
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ m25p,chunked-io;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7a0000>;
+ };
+
+ partition@7f0000 {
+ label = "test";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ rstctrl: rstctrl {
+ compatible = "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ sdhci@1E130000 {
+ compatible = "ralink,mt7620a-sdhci";
+ reg = <0x1E130000 4000>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <20>;
+ };
+
+ xhci@1E1C0000 {
+ compatible = "xhci-platform";
+ reg = <0x1E1C0000 4000>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <22>;
+ };
+
+ gic: gic@1fbc0000 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "ralink,mt7621-gic";
+ reg = < 0x1fbc0000 0x80 /* gic */
+ 0x1fbf0000 0x8000 /* cpc */
+ 0x1fbf8000 0x8000 /* gpmc */
+ >;
+ };
+
+ nand@1e003000 {
+ compatible = "mtk,mt7621-nand";
+ bank-width = <2>;
+ reg = <0x1e003000 0x800
+ 0x1e003800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x80000>; /* 64 KB */
+ };
+ partition@80000 {
+ label = "uboot_env";
+ reg = <0x80000 0x80000>; /* 64 KB */
+ };
+ partition@100000 {
+ label = "factory";
+ reg = <0x100000 0x40000>;
+ };
+ partition@140000 {
+ label = "rootfs";
+ reg = <0x140000 0xec0000>;
+ };
+ };
+
+ ethernet@1e100000 {
+ compatible = "ralink,mt7621-eth";
+ reg = <0x1e100000 10000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ralink,port-map = "llllw";
+
+ interrupt-parent = <&gic>;
+ interrupts = <3>;
+
+/* resets = <&rstctrl 21 &rstctrl 23>;
+ reset-names = "fe", "esw";
+
+ port@4 {
+ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
+ reg = <4>;
+
+ status = "disabled";
+ };
+
+ port@5 {
+ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
+ reg = <5>;
+
+ status = "disabled";
+ };
+*/
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+
+/* interrupt-parent = <&gic>;
+ interrupts = <23>;
+*/ };
+ };
+ };
+
+ gsw@1e110000 {
+ compatible = "ralink,mt7620a-gsw";
+ reg = <0x1e110000 8000>;
+ };
+};
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7621_eval.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+ compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
+ model = "Ralink MT7621 evaluation board";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};

37
target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch
View file

@ -1,37 +0,0 @@
From a9d4390c6d27e737887388ccbb48f3767f9f89ef Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 24 Jan 2014 17:01:17 +0100
Subject: [PATCH 209/215] MIPS: ralink: add MT7621 early_printk support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/early_printk.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -13,6 +13,8 @@
#ifdef CONFIG_SOC_RT288X
#define EARLY_UART_BASE 0x300c00
+#elif defined(CONFIG_SOC_MT7621)
+#define EARLY_UART_BASE 0x1E000c00
#else
#define EARLY_UART_BASE 0x10000c00
#endif
@@ -40,9 +42,15 @@ static inline u32 uart_r32(unsigned reg)
void prom_putchar(unsigned char ch)
{
+#ifdef CONFIG_SOC_MT7621
+ uart_w32(ch, UART_TX);
+ while ((uart_r32(0x14) & UART_LSR_THRE) == 0)
+ ;
+#else
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
;
uart_w32(ch, UART_REG_TX);
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
;
+#endif
}

822
target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch
View file

@ -1,822 +0,0 @@
From 6541090161342ef11cf319a7471aeb6769e20c2c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:22:39 +0000
Subject: [PATCH 210/215] MIPS: ralink: add MT7621 pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-mt7621.c | 797 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 798 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7621.c
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
--- /dev/null
+++ b/arch/mips/pci/pci-mt7621.c
@@ -0,0 +1,797 @@
+/**************************************************************************
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI init for Ralink RT2880 solution
+ *
+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ **************************************************************************
+ * May 2007 Bruce Chang
+ * Initial Release
+ *
+ * May 2009 Bruce Chang
+ * support RT2880/RT3883 PCIe
+ *
+ * May 2011 Bruce Chang
+ * support RT6855/MT7620 PCIe
+ *
+ **************************************************************************
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <asm/pci.h>
+#include <asm/io.h>
+//#include <asm/mach-ralink/eureka_ep430.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/delay.h>
+//#include <asm/rt2880/surfboardint.h>
+
+#include <ralink_regs.h>
+
+extern void pcie_phy_init(void);
+extern void chk_phy_pll(void);
+
+/*
+ * These functions and structures provide the BIOS scan and mapping of the PCI
+ * devices.
+ */
+
+#define CONFIG_PCIE_PORT0
+#define CONFIG_PCIE_PORT1
+#define CONFIG_PCIE_PORT2
+#define RALINK_PCIE0_CLK_EN (1<<24)
+#define RALINK_PCIE1_CLK_EN (1<<25)
+#define RALINK_PCIE2_CLK_EN (1<<26)
+
+#define RALINK_PCI_CONFIG_ADDR 0x20
+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
+#define SURFBOARDINT_PCIE0 12 /* PCIE0 */
+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
+#define SURFBOARDINT_PCIE1 32 /* PCIE1 */
+#define SURFBOARDINT_PCIE2 33 /* PCIE2 */
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCIE0_RST (1<<24)
+#define RALINK_PCIE1_RST (1<<25)
+#define RALINK_PCIE2_RST (1<<26)
+#define RALINK_SYSCTL_BASE 0xBE000000
+
+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
+#define RALINK_PCI_BASE 0xBE140000
+
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
+#define RT6855_PCIE0_OFFSET 0x2000
+#define RT6855_PCIE1_OFFSET 0x3000
+#define RT6855_PCIE2_OFFSET 0x4000
+
+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
+
+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
+
+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
+
+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
+
+
+#define MV_WRITE(ofs, data) \
+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
+#define MV_READ(ofs, data) \
+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+#define MV_READ_DATA(ofs) \
+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_16(ofs, data) \
+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
+#define MV_READ_16(ofs, data) \
+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
+
+#define MV_WRITE_8(ofs, data) \
+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
+#define MV_READ_8(ofs, data) \
+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
+
+
+
+#define RALINK_PCI_MM_MAP_BASE 0x60000000
+#define RALINK_PCI_IO_MAP_BASE 0x1e160000
+
+#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
+#define GPIO_PERST
+#define ASSERT_SYSRST_PCIE(val) do { \
+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
+ RALINK_RSTCTRL |= val; \
+ else \
+ RALINK_RSTCTRL &= ~val; \
+ } while(0)
+#define DEASSERT_SYSRST_PCIE(val) do { \
+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
+ RALINK_RSTCTRL &= ~val; \
+ else \
+ RALINK_RSTCTRL |= val; \
+ } while(0)
+#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
+#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
+#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
+#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
+#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
+#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
+#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
+#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
+//RALINK_SYSCFG1 bit
+#define RALINK_PCI_HOST_MODE_EN (1<<7)
+#define RALINK_PCIE_RC_MODE_EN (1<<8)
+//RALINK_RSTCTRL bit
+#define RALINK_PCIE_RST (1<<23)
+#define RALINK_PCI_RST (1<<24)
+//RALINK_CLKCFG1 bit
+#define RALINK_PCI_CLK_EN (1<<19)
+#define RALINK_PCIE_CLK_EN (1<<21)
+//RALINK_GPIOMODE bit
+#define PCI_SLOTx2 (1<<11)
+#define PCI_SLOTx1 (2<<11)
+//MTK PCIE PLL bit
+#define PDRV_SW_SET (1<<31)
+#define LC_CKDRVPD_ (1<<19)
+
+#define MEMORY_BASE 0x0
+int pcie_link_status = 0;
+
+void __inline__ read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val);
+void __inline__ write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val);
+
+#define PCI_ACCESS_READ_1 0
+#define PCI_ACCESS_READ_2 1
+#define PCI_ACCESS_READ_4 2
+#define PCI_ACCESS_WRITE_1 3
+#define PCI_ACCESS_WRITE_2 4
+#define PCI_ACCESS_WRITE_4 5
+
+static int config_access(unsigned char access_type, struct pci_bus *bus,
+ unsigned int devfn, unsigned int where, u32 * data)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+ uint32_t address_reg, data_reg;
+ unsigned int address;
+
+ address_reg = RALINK_PCI_CONFIG_ADDR;
+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+
+ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
+ MV_WRITE(address_reg, address);
+
+ switch(access_type) {
+ case PCI_ACCESS_WRITE_1:
+ MV_WRITE_8(data_reg+(where&0x3), *data);
+ break;
+ case PCI_ACCESS_WRITE_2:
+ MV_WRITE_16(data_reg+(where&0x3), *data);
+ break;
+ case PCI_ACCESS_WRITE_4:
+ MV_WRITE(data_reg, *data);
+ break;
+ case PCI_ACCESS_READ_1:
+ MV_READ_8( data_reg+(where&0x3), data);
+ break;
+ case PCI_ACCESS_READ_2:
+ MV_READ_16(data_reg+(where&0x3), data);
+ break;
+ case PCI_ACCESS_READ_4:
+ MV_READ(data_reg, data);
+ break;
+ default:
+ printk("no specify access type\n");
+ break;
+ }
+ return 0;
+}
+
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+ switch (size) {
+ case 1:
+ return read_config_byte(bus, devfn, where, (u8 *) val);
+ case 2:
+ return read_config_word(bus, devfn, where, (u16 *) val);
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int
+pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+struct pci_ops rt2880_pci_ops= {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
+
+static struct resource rt2880_res_pci_mem1 = {
+ .name = "PCI MEM1",
+ .start = RALINK_PCI_MM_MAP_BASE,
+ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
+ .flags = IORESOURCE_MEM,
+};
+static struct resource rt2880_res_pci_io1 = {
+ .name = "PCI I/O1",
+ .start = RALINK_PCI_IO_MAP_BASE,
+ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller rt2880_controller = {
+ .pci_ops = &rt2880_pci_ops,
+ .mem_resource = &rt2880_res_pci_mem1,
+ .io_resource = &rt2880_res_pci_io1,
+ .mem_offset = 0x00000000UL,
+ .io_offset = 0x00000000UL,
+ .io_map_base = 0xa0000000,
+};
+
+void __inline__
+read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
+{
+ unsigned int address_reg, data_reg, address;
+
+ address_reg = RALINK_PCI_CONFIG_ADDR;
+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
+ MV_WRITE(address_reg, address);
+ MV_READ(data_reg, val);
+ return;
+}
+
+void __inline__
+write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
+{
+ unsigned int address_reg, data_reg, address;
+
+ address_reg = RALINK_PCI_CONFIG_ADDR;
+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
+ MV_WRITE(address_reg, address);
+ MV_WRITE(data_reg, val);
+ return;
+}
+
+
+int __init
+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ u16 cmd;
+ u32 val;
+ int irq = 0;
+
+ if ((dev->bus->number == 0) && (slot == 0)) {
+ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+ printk("BAR0 at slot 0 = %x\n", val);
+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ } else if((dev->bus->number == 0) && (slot == 0x1)) {
+ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+ printk("BAR0 at slot 1 = %x\n", val);
+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ } else if((dev->bus->number == 0) && (slot == 0x2)) {
+ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
+ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
+ printk("BAR0 at slot 2 = %x\n", val);
+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
+ switch (pcie_link_status) {
+ case 2:
+ case 6:
+ irq = RALINK_INT_PCIE1;
+ break;
+ case 4:
+ irq = RALINK_INT_PCIE2;
+ break;
+ default:
+ irq = RALINK_INT_PCIE0;
+ }
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
+ switch (pcie_link_status) {
+ case 5:
+ case 6:
+ irq = RALINK_INT_PCIE2;
+ break;
+ default:
+ irq = RALINK_INT_PCIE1;
+ }
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
+ switch (pcie_link_status) {
+ case 5:
+ case 6:
+ irq = RALINK_INT_PCIE2;
+ break;
+ default:
+ irq = RALINK_INT_PCIE1;
+ }
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
+ irq = RALINK_INT_PCIE2;
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
+ irq = RALINK_INT_PCIE2;
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
+ irq = RALINK_INT_PCIE2;
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ } else {
+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ return 0;
+ }
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+ return irq;
+}
+
+void
+set_pcie_phy(u32 *addr, int start_b, int bits, int val)
+{
+// printk("0x%p:", addr);
+// printk(" %x", *addr);
+ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
+ *(unsigned int *)(addr) |= val << start_b;
+// printk(" -> %x\n", *addr);
+}
+
+void
+bypass_pipe_rst(void)
+{
+#if defined (CONFIG_PCIE_PORT0)
+ /* PCIe Port 0 */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ /* PCIe Port 1 */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ /* PCIe Port 2 */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
+#endif
+}
+
+void
+set_phy_for_ssc(void)
+{
+ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
+
+ reg = (reg >> 6) & 0x7;
+#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
+ /* Set PCIe Port0 & Port1 PHY to disable SSC */
+ /* Debug Xtal Type */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
+ printk("***** Xtal 40MHz *****\n");
+ } else { // 25MHz | 20MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
+ if (reg >= 6) {
+ printk("***** Xtal 25MHz *****\n");
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
+ } else {
+ printk("***** Xtal 20MHz *****\n");
+ }
+ }
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
+ }
+ /* Enable PHY and disable force mode */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ /* Set PCIe Port2 PHY to disable SSC */
+ /* Debug Xtal Type */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
+ } else { // 25MHz | 20MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
+ if (reg >= 6) { // 25MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
+ }
+ }
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
+ }
+ /* Enable PHY and disable force mode */
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
+#endif
+}
+
+int init_rt2880pci(void)
+{
+ unsigned long val = 0;
+ iomem_resource.start = 0;
+ iomem_resource.end= ~0;
+ ioport_resource.start= 0;
+ ioport_resource.end = ~0;
+
+#if defined (CONFIG_PCIE_PORT0)
+ val = RALINK_PCIE0_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ val |= RALINK_PCIE1_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ val |= RALINK_PCIE2_RST;
+#endif
+ DEASSERT_SYSRST_PCIE(val);
+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+
+ bypass_pipe_rst();
+ set_phy_for_ssc();
+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
+ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
+ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
+ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
+ mdelay(100);
+ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
+ mdelay(100);
+ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
+
+ mdelay(100);
+#else
+ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
+#endif
+#if defined (CONFIG_PCIE_PORT0)
+ val = RALINK_PCIE0_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ val |= RALINK_PCIE1_RST;
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ val |= RALINK_PCIE2_RST;
+#endif
+ DEASSERT_SYSRST_PCIE(val);
+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
+#if defined (CONFIG_PCIE_PORT0)
+ read_config(0, 0, 0, 0x70c, &val);
+ val &= ~(0xff)<<8;
+ val |= 0x50<<8;
+ write_config(0, 0, 0, 0x70c, val);
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ read_config(0, 1, 0, 0x70c, &val);
+ val &= ~(0xff)<<8;
+ val |= 0x50<<8;
+ write_config(0, 1, 0, 0x70c, val);
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ read_config(0, 2, 0, 0x70c, &val);
+ val &= ~(0xff)<<8;
+ val |= 0x50<<8;
+ write_config(0, 2, 0, 0x70c, val);
+#endif
+
+#if defined (CONFIG_PCIE_PORT0)
+ read_config(0, 0, 0, 0x70c, &val);
+ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ read_config(0, 1, 0, 0x70c, &val);
+ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ read_config(0, 2, 0, 0x70c, &val);
+ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
+#endif
+
+ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
+ RALINK_SYSCFG1 &= ~(0x30);
+ RALINK_SYSCFG1 |= (2<<4);
+ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
+ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
+ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
+ RALINK_PCIE_CLK_GEN |= 0x80000000;
+ mdelay(50);
+ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
+
+
+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
+ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
+ mdelay(100);
+#else
+ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
+#endif
+ mdelay(500);
+
+
+ mdelay(500);
+#if defined (CONFIG_PCIE_PORT0)
+ if(( RALINK_PCI0_STATUS & 0x1) == 0)
+ {
+ printk("PCIE0 no card, disable it(RST&CLK)\n");
+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
+ pcie_link_status &= ~(1<<0);
+ } else {
+ pcie_link_status |= 1<<0;
+ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
+ }
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ if(( RALINK_PCI1_STATUS & 0x1) == 0)
+ {
+ printk("PCIE1 no card, disable it(RST&CLK)\n");
+ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
+ pcie_link_status &= ~(1<<1);
+ } else {
+ pcie_link_status |= 1<<1;
+ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
+ }
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
+ printk("PCIE2 no card, disable it(RST&CLK)\n");
+ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
+ pcie_link_status &= ~(1<<2);
+ } else {
+ pcie_link_status |= 1<<2;
+ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
+ }
+#endif
+ if (pcie_link_status == 0)
+ return 0;
+
+/*
+pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
+3'b000 x x x
+3'b001 x x 0
+3'b010 x 0 x
+3'b011 x 1 0
+3'b100 0 x x
+3'b101 1 x 0
+3'b110 1 0 x
+3'b111 2 1 0
+*/
+ switch(pcie_link_status) {
+ case 2:
+ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
+ break;
+ case 4:
+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
+ break;
+ case 5:
+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
+ break;
+ case 6:
+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
+ break;
+ }
+ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
+ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
+
+/*
+ ioport_resource.start = rt2880_res_pci_io1.start;
+ ioport_resource.end = rt2880_res_pci_io1.end;
+*/
+
+ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
+ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
+
+#if defined (CONFIG_PCIE_PORT0)
+ //PCIe0
+ if((pcie_link_status & 0x1) != 0) {
+ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
+ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
+ RALINK_PCI0_CLASS = 0x06040001;
+ printk("PCIE0 enabled\n");
+ }
+#endif
+#if defined (CONFIG_PCIE_PORT1)
+ //PCIe1
+ if ((pcie_link_status & 0x2) != 0) {
+ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
+ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
+ RALINK_PCI1_CLASS = 0x06040001;
+ printk("PCIE1 enabled\n");
+ }
+#endif
+#if defined (CONFIG_PCIE_PORT2)
+ //PCIe2
+ if ((pcie_link_status & 0x4) != 0) {
+ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
+ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
+ RALINK_PCI2_CLASS = 0x06040001;
+ printk("PCIE2 enabled\n");
+ }
+#endif
+
+
+ switch(pcie_link_status) {
+ case 7:
+ read_config(0, 2, 0, 0x4, &val);
+ write_config(0, 2, 0, 0x4, val|0x4);
+ // write_config(0, 1, 0, 0x4, val|0x7);
+ case 3:
+ case 5:
+ case 6:
+ read_config(0, 1, 0, 0x4, &val);
+ write_config(0, 1, 0, 0x4, val|0x4);
+ // write_config(0, 1, 0, 0x4, val|0x7);
+ default:
+ read_config(0, 0, 0, 0x4, &val);
+ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
+ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
+ }
+ register_pci_controller(&rt2880_controller);
+ return 0;
+
+}
+arch_initcall(init_rt2880pci);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}

227
target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch
View file

@ -1,227 +0,0 @@
From 158f2deb6349046ee4406578a5d3146ce9870cb3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:24:42 +0000
Subject: [PATCH 211/215] watchdog: add MT7621 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/watchdog/Kconfig | 7 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/mt7621_wdt.c | 185 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 193 insertions(+)
create mode 100644 drivers/watchdog/mt7621_wdt.c
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1120,6 +1120,13 @@ config RALINK_WDT
help
Hardware driver for the Ralink SoC Watchdog Timer.
+config MT7621_WDT
+ tristate "Mediatek SoC watchdog"
+ select WATCHDOG_CORE
+ depends on SOC_MT7621
+ help
+ Hardware driver for the Ralink SoC Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
# PARISC Architecture
--- /dev/null
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -0,0 +1,185 @@
+/*
+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ *
+ * This driver was based on: drivers/watchdog/softdog.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSC_RSTSTAT 0x38
+#define WDT_RST_CAUSE BIT(1)
+
+#define RALINK_WDT_TIMEOUT 30
+
+#define TIMER_REG_TMRSTAT 0x00
+#define TIMER_REG_TMR1LOAD 0x24
+#define TIMER_REG_TMR1CTL 0x20
+
+#define TMR1CTL_ENABLE BIT(7)
+#define TMR1CTL_RESTART BIT(9)
+
+static void __iomem *mt762x_wdt_base;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline void rt_wdt_w32(unsigned reg, u32 val)
+{
+ iowrite32(val, mt762x_wdt_base + reg);
+}
+
+static inline u32 rt_wdt_r32(unsigned reg)
+{
+ return ioread32(mt762x_wdt_base + reg);
+}
+
+static int mt762x_wdt_ping(struct watchdog_device *w)
+{
+ rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
+
+ return 0;
+}
+
+static int mt762x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
+{
+ w->timeout = t;
+ rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
+ mt762x_wdt_ping(w);
+
+ return 0;
+}
+
+static int mt762x_wdt_start(struct watchdog_device *w)
+{
+ u32 t;
+
+ rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << 16);
+ mt762x_wdt_set_timeout(w, w->timeout);
+
+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+ t |= TMR1CTL_ENABLE;
+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+ return 0;
+}
+
+static int mt762x_wdt_stop(struct watchdog_device *w)
+{
+ u32 t;
+
+ mt762x_wdt_ping(w);
+
+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+ t &= ~TMR1CTL_ENABLE;
+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+ return 0;
+}
+
+static int mt762x_wdt_bootcause(void)
+{
+ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
+ return WDIOF_CARDRESET;
+
+ return 0;
+}
+
+static struct watchdog_info mt762x_wdt_info = {
+ .identity = "Mediatek Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static struct watchdog_ops mt762x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = mt762x_wdt_start,
+ .stop = mt762x_wdt_stop,
+ .ping = mt762x_wdt_ping,
+ .set_timeout = mt762x_wdt_set_timeout,
+};
+
+static struct watchdog_device mt762x_wdt_dev = {
+ .info = &mt762x_wdt_info,
+ .ops = &mt762x_wdt_ops,
+ .min_timeout = 1,
+};
+
+static int mt762x_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mt762x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (IS_ERR(mt762x_wdt_base))
+ return PTR_ERR(mt762x_wdt_base);
+
+ device_reset(&pdev->dev);
+
+ mt762x_wdt_dev.dev = &pdev->dev;
+ mt762x_wdt_dev.bootstatus = mt762x_wdt_bootcause();
+ mt762x_wdt_dev.max_timeout = (0xfffful / 1000);
+ mt762x_wdt_dev.timeout = mt762x_wdt_dev.max_timeout;
+
+ watchdog_set_nowayout(&mt762x_wdt_dev, nowayout);
+
+ ret = watchdog_register_device(&mt762x_wdt_dev);
+ if (!ret)
+ dev_info(&pdev->dev, "Initialized\n");
+
+ return 0;
+}
+
+static int mt762x_wdt_remove(struct platform_device *pdev)
+{
+ watchdog_unregister_device(&mt762x_wdt_dev);
+
+ return 0;
+}
+
+static void mt762x_wdt_shutdown(struct platform_device *pdev)
+{
+ mt762x_wdt_stop(&mt762x_wdt_dev);
+}
+
+static const struct of_device_id mt762x_wdt_match[] = {
+ { .compatible = "mtk,mt7621-wdt" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt762x_wdt_match);
+
+static struct platform_driver mt762x_wdt_driver = {
+ .probe = mt762x_wdt_probe,
+ .remove = mt762x_wdt_remove,
+ .shutdown = mt762x_wdt_shutdown,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mt762x_wdt_match,
+ },
+};
+
+module_platform_driver(mt762x_wdt_driver);
+
+MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

236
target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch
View file

@ -1,236 +0,0 @@
From 2a9b5a9fc1a0707b95dbe61dd1c30b9337cb457d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:26:34 +0000
Subject: [PATCH 212/215] GPIO: ralink: add mt7621 gpio controller
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/Kconfig | 5 +-
drivers/gpio/Kconfig | 6 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mt7621.c | 183 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 194 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpio/gpio-mt7621.c
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -448,7 +448,10 @@ config RALINK
select ARCH_REQUIRE_GPIOLIB
select PINCTRL
select PINCTRL_RT2880
-
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
+ select ARCH_REQUIRE_GPIOLIB
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select FW_ARC
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -710,6 +710,12 @@ config GPIO_MSIC
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
+config GPIO_MT7621
+ bool "Mediatek GPIO Support"
+ depends on SOC_MT7621
+ help
+ Say yes here to support the Mediatek SoC GPIO device
+
comment "USB GPIO expanders:"
config GPIO_VIPERBOARD
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
--- /dev/null
+++ b/drivers/gpio/gpio-mt7621.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#define MTK_BANK_WIDTH 32
+
+enum mediatek_gpio_reg {
+ GPIO_REG_CTRL = 0,
+ GPIO_REG_POL,
+ GPIO_REG_DATA,
+ GPIO_REG_DSET,
+ GPIO_REG_DCLR,
+};
+
+static void __iomem *mtk_gc_membase;
+
+struct mtk_gc {
+ struct gpio_chip chip;
+ spinlock_t lock;
+ int bank;
+};
+
+int
+gpio_to_irq(unsigned gpio)
+{
+ return -1;
+}
+
+static inline struct mtk_gc
+*to_mediatek_gpio(struct gpio_chip *chip)
+{
+ struct mtk_gc *mgc;
+
+ mgc = container_of(chip, struct mtk_gc, chip);
+
+ return mgc;
+}
+
+static inline void
+mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
+{
+ iowrite32(val, mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
+}
+
+static inline u32
+mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
+{
+ return ioread32(mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
+}
+
+static void
+mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mtk_gc *rg = to_mediatek_gpio(chip);
+
+ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
+}
+
+static int
+mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mtk_gc *rg = to_mediatek_gpio(chip);
+
+ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
+}
+
+static int
+mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct mtk_gc *rg = to_mediatek_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
+ t &= ~BIT(offset);
+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int
+mediatek_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct mtk_gc *rg = to_mediatek_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
+ t |= BIT(offset);
+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
+ mediatek_gpio_set(chip, offset, value);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int
+mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
+{
+ const __be32 *id = of_get_property(bank, "reg", NULL);
+ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
+ sizeof(struct mtk_gc), GFP_KERNEL);
+ if (!rg || !id)
+ return -ENOMEM;
+
+ spin_lock_init(&rg->lock);
+
+ rg->chip.dev = &pdev->dev;
+ rg->chip.label = dev_name(&pdev->dev);
+ rg->chip.of_node = bank;
+ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
+ rg->chip.ngpio = MTK_BANK_WIDTH;
+ rg->chip.direction_input = mediatek_gpio_direction_input;
+ rg->chip.direction_output = mediatek_gpio_direction_output;
+ rg->chip.get = mediatek_gpio_get;
+ rg->chip.set = mediatek_gpio_set;
+
+ /* set polarity to low for all gpios */
+ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
+
+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
+
+ return gpiochip_add(&rg->chip);
+}
+
+static int
+mediatek_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *bank, *np = pdev->dev.of_node;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ mtk_gc_membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (IS_ERR(mtk_gc_membase))
+ return PTR_ERR(mtk_gc_membase);
+
+ for_each_child_of_node(np, bank)
+ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
+ mediatek_gpio_bank_probe(pdev, bank);
+
+ return 0;
+}
+
+static const struct of_device_id mediatek_gpio_match[] = {
+ { .compatible = "mtk,mt7621-gpio" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
+
+static struct platform_driver mediatek_gpio_driver = {
+ .probe = mediatek_gpio_probe,
+ .driver = {
+ .name = "mt7621_gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = mediatek_gpio_match,
+ },
+};
+
+static int __init
+mediatek_gpio_init(void)
+{
+ return platform_driver_register(&mediatek_gpio_driver);
+}
+
+subsys_initcall(mediatek_gpio_init);

4419
target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch
View file

File diff suppressed because it is too large Load diff

5814
target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch
View file

File diff suppressed because it is too large Load diff

346
target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch
View file

@ -1,346 +0,0 @@
From 1a961f146e65e2716dbe9065baa4c0931fcb6b3e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:34:11 +0000
Subject: [PATCH 215/215] SPI: ralink: add mt7621 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 205 insertions(+), 13 deletions(-)
--- a/drivers/spi/spi-rt2880.c
+++ b/drivers/spi/spi-rt2880.c
@@ -21,8 +21,13 @@
#include <linux/io.h>
#include <linux/reset.h>
#include <linux/spi/spi.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <ralink_regs.h>
+
+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
+
#define DRIVER_NAME "spi-rt2880"
/* only one slave is supported*/
#define RALINK_NUM_CHIPSELECTS 1
@@ -63,6 +68,25 @@
/* SPIFIFOSTAT register bit field */
#define SPIFIFOSTAT_TXFULL BIT(17)
+#define MT7621_SPI_TRANS 0x00
+#define SPITRANS_BUSY BIT(16)
+#define MT7621_SPI_OPCODE 0x04
+#define MT7621_SPI_DATA0 0x08
+#define SPI_CTL_TX_RX_CNT_MASK 0xff
+#define SPI_CTL_START BIT(8)
+#define MT7621_SPI_POLAR 0x38
+#define MT7621_SPI_MASTER 0x28
+#define MT7621_SPI_SPACE 0x3c
+
+struct rt2880_spi;
+
+struct rt2880_spi_ops {
+ void (*init_hw)(struct rt2880_spi *rs);
+ void (*set_cs)(struct rt2880_spi *rs, int enable);
+ int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
+ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
+};
+
struct rt2880_spi {
struct spi_master *master;
void __iomem *base;
@@ -70,6 +94,8 @@ struct rt2880_spi {
unsigned int speed;
struct clk *clk;
spinlock_t lock;
+
+ struct rt2880_spi_ops *ops;
};
static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struc
return 0;
}
+static int mt7621_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+{
+/* u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
+
+ // set default clock to hclk/5
+ master &= ~(0xfff << 16);
+ master |= 0x3 << 16;
+*/
+ return 0;
+}
+
/*
* called only when no transfer is active on the bus
*/
@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_dev
if (rs->speed != speed) {
dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
- rc = rt2880_spi_baudrate_set(spi, speed);
+ rc = rs->ops->baudrate_set(spi, speed);
if (rc)
return rc;
}
@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2
rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
}
+static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
+{
+ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
+
+ if (enable)
+ polar |= 1;
+ else
+ polar &= ~1;
+ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
+}
+
static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
{
int i;
@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_r
return -ETIMEDOUT;
}
+static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
+{
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+ u32 status;
+
+ status = rt2880_spi_read(rs, MT7621_SPI_TRANS);
+ if ((status & SPITRANS_BUSY) == 0) {
+ return 0;
+ }
+ cpu_relax();
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
static unsigned int
-rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
{
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
unsigned count = 0;
@@ -239,6 +305,100 @@ out:
return count;
}
+static unsigned int
+mt7621_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ struct spi_transfer *next = NULL;
+ const u8 *tx = xfer->tx_buf;
+ u8 *rx = NULL;
+ u32 trans;
+ int len = xfer->len;
+
+ if (!tx)
+ return 0;
+
+ if (!list_is_last(&xfer->transfer_list, list)) {
+ next = list_entry(xfer->transfer_list.next, struct spi_transfer, transfer_list);
+ rx = next->rx_buf;
+ }
+
+ trans = rt2880_spi_read(rs, MT7621_SPI_TRANS);
+ trans &= ~SPI_CTL_TX_RX_CNT_MASK;
+
+ if (tx) {
+ u32 data0 = 0, opcode = 0;
+
+ switch (xfer->len) {
+ case 8:
+ data0 |= tx[7] << 24;
+ case 7:
+ data0 |= tx[6] << 16;
+ case 6:
+ data0 |= tx[5] << 8;
+ case 5:
+ data0 |= tx[4];
+ case 4:
+ opcode |= tx[3] << 8;
+ case 3:
+ opcode |= tx[2] << 16;
+ case 2:
+ opcode |= tx[1] << 24;
+ case 1:
+ opcode |= tx[0];
+ break;
+
+ default:
+ dev_err(&spi->dev, "trying to write too many bytes: %d\n", next->len);
+ return -EINVAL;
+ }
+
+ rt2880_spi_write(rs, MT7621_SPI_DATA0, data0);
+ rt2880_spi_write(rs, MT7621_SPI_OPCODE, opcode);
+ trans |= xfer->len;
+ }
+
+ if (rx)
+ trans |= (next->len << 4);
+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
+ trans |= SPI_CTL_START;
+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
+
+ mt7621_spi_wait_till_ready(rs);
+
+ if (rx) {
+ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
+ u32 opcode = rt2880_spi_read(rs, MT7621_SPI_OPCODE);
+
+ switch (next->len) {
+ case 8:
+ rx[7] = (opcode >> 24) & 0xff;
+ case 7:
+ rx[6] = (opcode >> 16) & 0xff;
+ case 6:
+ rx[5] = (opcode >> 8) & 0xff;
+ case 5:
+ rx[4] = opcode & 0xff;
+ case 4:
+ rx[3] = (data0 >> 24) & 0xff;
+ case 3:
+ rx[2] = (data0 >> 16) & 0xff;
+ case 2:
+ rx[1] = (data0 >> 8) & 0xff;
+ case 1:
+ rx[0] = data0 & 0xff;
+ break;
+
+ default:
+ dev_err(&spi->dev, "trying to read too many bytes: %d\n", next->len);
+ return -EINVAL;
+ }
+ len += next->len;
+ }
+
+ return len;
+}
+
static int rt2880_spi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
{
@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_messa
}
if (!cs_active) {
- rt2880_spi_set_cs(rs, 1);
+ rs->ops->set_cs(rs, 1);
cs_active = 1;
}
if (t->len)
- m->actual_length += rt2880_spi_write_read(spi, t);
+ m->actual_length += rs->ops->write_read(spi, &m->transfers, t);
if (t->delay_usecs)
udelay(t->delay_usecs);
if (t->cs_change) {
- rt2880_spi_set_cs(rs, 0);
+ rs->ops->set_cs(rs, 0);
cs_active = 0;
}
}
msg_done:
if (cs_active)
- rt2880_spi_set_cs(rs, 0);
+ rs->ops->set_cs(rs, 0);
m->status = status;
spi_finalize_current_message(master);
@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt28
rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
}
+static void mt7621_spi_reset(struct rt2880_spi *rs)
+{
+ u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
+
+ master &= ~(0xfff << 16);
+ master |= 3 << 16;
+
+ master |= 7 << 29;
+ rt2880_spi_write(rs, MT7621_SPI_MASTER, master);
+}
+
+static struct rt2880_spi_ops spi_ops[] = {
+ {
+ .init_hw = rt2880_spi_reset,
+ .set_cs = rt2880_spi_set_cs,
+ .baudrate_set = rt2880_spi_baudrate_set,
+ .write_read = rt2880_spi_write_read,
+ }, {
+ .init_hw = mt7621_spi_reset,
+ .set_cs = mt7621_spi_set_cs,
+ .baudrate_set = mt7621_spi_baudrate_set,
+ .write_read = mt7621_spi_write_read,
+ },
+};
+
+static const struct of_device_id rt2880_spi_match[] = {
+ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
+ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+
static int rt2880_spi_probe(struct platform_device *pdev)
{
+ const struct of_device_id *match;
struct spi_master *master;
struct rt2880_spi *rs;
unsigned long flags;
@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platf
int status = 0;
struct clk *clk;
+ match = of_match_device(rt2880_spi_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(base))
@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platf
rs->clk = clk;
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
+ rs->ops = (struct rt2880_spi_ops *) match->data;
dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
spin_lock_irqsave(&rs->lock, flags);
device_reset(&pdev->dev);
- rt2880_spi_reset(rs);
+ rs->ops->init_hw(rs);
return spi_register_master(master);
}
@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct plat
MODULE_ALIAS("platform:" DRIVER_NAME);
-static const struct of_device_id rt2880_spi_match[] = {
- { .compatible = "ralink,rt2880-spi" },
- {},
-};
-MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-
static struct platform_driver rt2880_spi_driver = {
.driver = {
.name = DRIVER_NAME,

6045
target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch
View file

File diff suppressed because it is too large Load diff

86
target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch
View file

@ -1,86 +0,0 @@
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -17,46 +17,27 @@
#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/pinmux.h>
#include "common.h"
-static struct ralink_pinmux_grp mode_mux[] = {
- {
- .name = "i2c",
- .mask = RT2880_GPIO_MODE_I2C,
- .gpio_first = 1,
- .gpio_last = 2,
- }, {
- .name = "spi",
- .mask = RT2880_GPIO_MODE_SPI,
- .gpio_first = 3,
- .gpio_last = 6,
- }, {
- .name = "uartlite",
- .mask = RT2880_GPIO_MODE_UART0,
- .gpio_first = 7,
- .gpio_last = 14,
- }, {
- .name = "jtag",
- .mask = RT2880_GPIO_MODE_JTAG,
- .gpio_first = 17,
- .gpio_last = 21,
- }, {
- .name = "mdio",
- .mask = RT2880_GPIO_MODE_MDIO,
- .gpio_first = 22,
- .gpio_last = 23,
- }, {
- .name = "sdram",
- .mask = RT2880_GPIO_MODE_SDRAM,
- .gpio_first = 24,
- .gpio_last = 39,
- }, {
- .name = "pci",
- .mask = RT2880_GPIO_MODE_PCI,
- .gpio_first = 40,
- .gpio_last = 71,
- }, {0}
+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
+static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
+
+static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
+ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
+ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
+ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
+ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
+ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
+ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
+ { 0 }
};
static void rt288x_wdt_reset(void)
@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_CLKCFG);
}
-struct ralink_pinmux rt_gpio_pinmux = {
- .mode = mode_mux,
- .wdt_reset = rt288x_wdt_reset,
-};
-
void __init ralink_clk_init(void)
{
unsigned long cpu_rate;
@@ -140,4 +116,6 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->mem_base = RT2880_SDRAM_BASE;
soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+
+ rt2880_pinmux_data = rt2880_pinmux_data_act;
}

19
target/linux/ramips/patches-3.10/0218-rt2880-add-wmac-clock.patch
View file

@ -1,19 +0,0 @@
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -52,7 +52,7 @@ static void rt288x_wdt_reset(void)
void __init ralink_clk_init(void)
{
- unsigned long cpu_rate;
+ unsigned long cpu_rate, wmac_rate = 40000000;
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
@@ -77,6 +77,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("300500.uart", cpu_rate / 2);
ralink_clk_add("300c00.uartlite", cpu_rate / 2);
ralink_clk_add("400000.ethernet", cpu_rate / 2);
+ ralink_clk_add("480000.wmac", wmac_rate);
}
void __init ralink_of_remap(void)

22
target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
View file

@ -1,22 +0,0 @@
Index: linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
===================================================================
--- linux-3.10.34.orig/drivers/net/ethernet/ralink/mdio_rt2880.c
+++ linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
@@ -136,7 +136,7 @@ int rt2880_mdio_read(struct mii_bus *bus
if (err)
return 0xffff;
- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
return fe_r32(FE_MDIO_ACCESS) & 0xffff;
@@ -148,7 +148,7 @@ int rt2880_mdio_write(struct mii_bus *bu
int err;
u32 t;
- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
err = rt2880_mdio_wait_ready(priv);

31
target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch
View file

@ -1,31 +0,0 @@
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -145,6 +145,7 @@ static inline int soc_is_rt5350(void)
#define RT305X_GPIO_MODE_SDRAM 8
#define RT305X_GPIO_MODE_RGMII 9
#define RT5350_GPIO_MODE_PHY_LED 14
+#define RT5350_GPIO_MODE_SPI_CS1 21
#define RT3352_GPIO_MODE_LNA 18
#define RT3352_GPIO_MODE_PA 20
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -38,6 +38,10 @@ static struct rt2880_pmx_func uartlite_f
static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
+static struct rt2880_pmx_func rt5350_cs1_func[] = {
+ FUNC("spi_cs1", 0, 27, 1),
+ FUNC("wdg_cs1", 1, 27, 1),
+};
static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
@@ -81,6 +85,7 @@ static struct rt2880_pmx_group rt5350_pi
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
+ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
{ 0 }
};

368
target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch
View file

@ -1,368 +0,0 @@
--- a/drivers/spi/spi-rt2880.c
+++ b/drivers/spi/spi-rt2880.c
@@ -29,16 +29,17 @@
#define SPI_BPW_MASK(bits) BIT((bits) - 1)
#define DRIVER_NAME "spi-rt2880"
-/* only one slave is supported*/
-#define RALINK_NUM_CHIPSELECTS 1
/* in usec */
#define RALINK_SPI_WAIT_MAX_LOOP 2000
-#define RAMIPS_SPI_STAT 0x00
-#define RAMIPS_SPI_CFG 0x10
-#define RAMIPS_SPI_CTL 0x14
-#define RAMIPS_SPI_DATA 0x20
-#define RAMIPS_SPI_FIFO_STAT 0x38
+#define RAMIPS_SPI_DEV_OFFSET 0x40
+
+#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET))
+#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET))
+#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET))
+#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET))
+#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET))
+#define RAMIPS_SPI_ARBITER 0xF0
/* SPISTAT register bit field */
#define SPISTAT_BUSY BIT(0)
@@ -68,6 +69,10 @@
/* SPIFIFOSTAT register bit field */
#define SPIFIFOSTAT_TXFULL BIT(17)
+#define SPICTL_ARB_EN BIT(31)
+#define SPI1_POR BIT(1)
+#define SPI0_POR BIT(0)
+
#define MT7621_SPI_TRANS 0x00
#define SPITRANS_BUSY BIT(16)
#define MT7621_SPI_OPCODE 0x04
@@ -78,13 +83,16 @@
#define MT7621_SPI_MASTER 0x28
#define MT7621_SPI_SPACE 0x3c
+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
+
struct rt2880_spi;
struct rt2880_spi_ops {
void (*init_hw)(struct rt2880_spi *rs);
- void (*set_cs)(struct rt2880_spi *rs, int enable);
+ void (*set_cs)(struct spi_device *spi, int enable);
int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
+ int num_cs;
};
struct rt2880_spi {
@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st
static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
{
+ int cs = spi->chip_select;
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
u32 rate;
u32 prescale;
@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc
prescale = ilog2(rate / 2);
dev_dbg(&spi->dev, "prescale:%u\n", prescale);
- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
rs->speed = speed;
return 0;
}
@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev
{
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
unsigned int speed = spi->max_speed_hz;
- int rc;
+ int rc, cs = spi->chip_select;
+ u32 reg;
if ((t != NULL) && t->speed_hz)
speed = t->speed_hz;
@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev
return rc;
}
+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
+
+ reg = (reg & ~SPICFG_MSBFIRST);
+ if (!(spi->mode & SPI_LSB_FIRST))
+ reg |= SPICFG_MSBFIRST;
+
+ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING));
+ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
+ case SPI_MODE_0:
+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
+ break;
+ case SPI_MODE_1:
+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
+ break;
+ case SPI_MODE_2:
+ reg |= SPICFG_RXCLKEDGE_FALLING;
+ break;
+ case SPI_MODE_3:
+ reg |= SPICFG_TXCLKEDGE_FALLING;
+ break;
+ }
+
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
+
+ reg = SPICTL_ARB_EN;
+ if (spi->mode & SPI_CS_HIGH) {
+ switch(cs) {
+ case 0:
+ reg |= SPI0_POR;
+ break;
+ case 1:
+ reg |= SPI1_POR;
+ break;
+ }
+ }
+
+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg);
+
return 0;
}
-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
+static void rt2880_spi_set_cs(struct spi_device *spi, int enable)
{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ int cs = spi->chip_select;
+
if (enable)
- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
else
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
}
-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
if (enable)
@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2
rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
}
-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
+static inline int rt2880_spi_wait_till_ready(struct spi_device *spi)
{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ int cs = spi->chip_select;
int i;
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
u32 status;
- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
+ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs));
if ((status & SPISTAT_BUSY) == 0)
return 0;
@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r
return -ETIMEDOUT;
}
-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
+static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
int i;
for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
@@ -268,6 +323,7 @@ static unsigned int
rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
{
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ int cs = spi->chip_select;
unsigned count = 0;
u8 *rx = xfer->rx_buf;
const u8 *tx = xfer->tx_buf;
@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device
if (tx) {
for (count = 0; count < xfer->len; count++) {
- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
- err = rt2880_spi_wait_till_ready(rs);
+ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]);
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR);
+ err = rt2880_spi_wait_till_ready(spi);
if (err) {
dev_err(&spi->dev, "TX failed, err=%d\n", err);
goto out;
@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device
if (rx) {
for (count = 0; count < xfer->len; count++) {
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
- err = rt2880_spi_wait_till_ready(rs);
+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD);
+ err = rt2880_spi_wait_till_ready(spi);
if (err) {
dev_err(&spi->dev, "RX failed, err=%d\n", err);
goto out;
}
- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
+ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs));
}
}
@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device
trans |= SPI_CTL_START;
rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
- mt7621_spi_wait_till_ready(rs);
+ mt7621_spi_wait_till_ready(spi);
if (rx) {
u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa
}
if (!cs_active) {
- rs->ops->set_cs(rs, 1);
+ rs->ops->set_cs(spi, 1);
cs_active = 1;
}
@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa
udelay(t->delay_usecs);
if (t->cs_change) {
- rs->ops->set_cs(rs, 0);
+ rs->ops->set_cs(spi, 0);
cs_active = 0;
}
}
msg_done:
if (cs_active)
- rs->ops->set_cs(rs, 0);
+ rs->ops->set_cs(spi, 0);
m->status = status;
spi_finalize_current_message(master);
@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d
struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
if ((spi->max_speed_hz == 0) ||
- (spi->max_speed_hz > (rs->sys_freq / 2)))
+ (spi->max_speed_hz > (rs->sys_freq / 2)))
spi->max_speed_hz = (rs->sys_freq / 2);
if (spi->max_speed_hz < (rs->sys_freq / 128)) {
@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d
static void rt2880_spi_reset(struct rt2880_spi *rs)
{
- rt2880_spi_write(rs, RAMIPS_SPI_CFG,
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0),
SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA);
+}
+
+static void rt5350_spi_reset(struct rt2880_spi *rs)
+{
+ int cs;
+
+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER,
+ SPICTL_ARB_EN);
+
+ for (cs = 0; cs < rs->ops->num_cs; cs++) {
+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs),
+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA);
+ }
}
static void mt7621_spi_reset(struct rt2880_spi *rs)
@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] =
.set_cs = rt2880_spi_set_cs,
.baudrate_set = rt2880_spi_baudrate_set,
.write_read = rt2880_spi_write_read,
+ .num_cs = 1,
+ }, {
+ .init_hw = rt5350_spi_reset,
+ .set_cs = rt2880_spi_set_cs,
+ .baudrate_set = rt2880_spi_baudrate_set,
+ .write_read = rt2880_spi_write_read,
+ .num_cs = 2,
}, {
.init_hw = mt7621_spi_reset,
.set_cs = mt7621_spi_set_cs,
.baudrate_set = mt7621_spi_baudrate_set,
.write_read = mt7621_spi_write_read,
+ .num_cs = 1,
},
};
static const struct of_device_id rt2880_spi_match[] = {
{ .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
+ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]},
+ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] },
{},
};
MODULE_DEVICE_TABLE(of, rt2880_spi_match);
static int rt2880_spi_probe(struct platform_device *pdev)
{
- const struct of_device_id *match;
+ const struct of_device_id *match;
struct spi_master *master;
struct rt2880_spi *rs;
unsigned long flags;
@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf
struct resource *r;
int status = 0;
struct clk *clk;
+ struct rt2880_spi_ops *ops;
- match = of_match_device(rt2880_spi_match, &pdev->dev);
+ match = of_match_device(rt2880_spi_match, &pdev->dev);
if (!match)
return -EINVAL;
+ ops = (struct rt2880_spi_ops *)match->data;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, r);
@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf
return -ENOMEM;
}
- /* we support only mode 0, and no options */
- master->mode_bits = 0;
+ master->mode_bits = RT2880_SPI_MODE_BITS;
master->setup = rt2880_spi_setup;
master->transfer_one_message = rt2880_spi_transfer_one_message;
- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->dev.of_node = pdev->dev.of_node;
+ master->num_chipselect = ops->num_cs;
dev_set_drvdata(&pdev->dev, master);
@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf
rs->clk = clk;
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
- rs->ops = (struct rt2880_spi_ops *) match->data;
+ rs->ops = ops;
dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
spin_lock_irqsave(&rs->lock, flags);

52
target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch
View file

@ -1,52 +0,0 @@
From c174d2250e402399ad7dbdd57d51883d8804bba0 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 15 Jul 2013 00:40:37 +0200
Subject: [PATCH 31/33] owrt: MIPS: add OWRTDTB secion
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/kernel/head.S | 3 +++
arch/mips/ralink/Makefile | 2 +-
arch/mips/ralink/of.c | 4 +++-
3 files changed, 7 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
.fill 0x400
#endif /* CONFIG_IMAGE_CMDLINE_HACK */
+ .ascii "OWRTDTB:"
+ EXPORT(__image_dtb)
+ .fill 0x4000
__REF
NESTED(kernel_entry, 16, sp) # kernel entry point
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -26,4 +26,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
obj-$(CONFIG_DEBUG_FS) += bootrom.o
-obj-y += dts/
+#obj-y += dts/
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem
return 0;
}
+extern struct boot_param_header __image_dtb;
+
void __init plat_mem_setup(void)
{
set_io_port_base(KSEG1);
@@ -98,7 +100,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(&__image_dtb);
of_scan_flat_dt(early_init_dt_find_memory, NULL);
if (memory_dtb)

10
target/linux/ramips/patches-3.10/0400-MIPS-ralink-define-clock-for-wmac-on-rt3883.patch
View file

@ -1,10 +0,0 @@
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -111,6 +111,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", 40000000);
ralink_clk_add("10100000.ethernet", sys_rate);
+ ralink_clk_add("10180000.wmac", 40000000);
}
void __init ralink_of_remap(void)

27
target/linux/ramips/patches-3.10/0401-mt7620n-add-wmac-clock.patch
View file

@ -1,27 +0,0 @@
--- linux-3.10.26/arch/mips/ralink/mt7620.c 2014-01-15 21:49:41.368793580 +0200
+++ linux-3.10.26/arch/mips/ralink/mt7620.c 2014-01-15 19:33:32.022038160 +0200
@@ -105,12 +105,15 @@
void __init ralink_clk_init(void)
{
- unsigned long cpu_rate, sys_rate;
+ unsigned long cpu_rate, sys_rate, xtal_freq;
u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
+ u32 syscfg0 = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ xtal_freq = (syscfg0 & 0x40) ? 40000000 : 20000000;
+
if (cpu_clk) {
cpu_rate = 480000000;
} else if (!swconfig) {
@@ -133,6 +136,7 @@
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10180000.wmac", xtal_freq);
if (IS_ENABLED(CONFIG_USB)) {
/*

166
target/linux/ramips/rt288x/config-3.10
View file

@ -1,166 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_RT2880_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_INTC=y
CONFIG_IRQ_WORK=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_MDIO=y
CONFIG_NET_RALINK_MDIO_RT2880=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PCI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
CONFIG_RALINK_WDT=y
CONFIG_RA_NAT_NONE=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
CONFIG_SOC_RT288X=y
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

169
target/linux/ramips/rt305x/config-3.10
View file

@ -1,169 +0,0 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
# CONFIG_CLKEVT_RT3352 is not set
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_RT305X_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
# CONFIG_DWC_OTG is not set
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_ESW_RT3052=y
CONFIG_NLS=m
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_SAMSUNG_USBPHY is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
CONFIG_SOC_RT305X=y
# CONFIG_SOC_RT3883 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB=m
# CONFIG_USB_ARCH_HAS_XHCI is not set
CONFIG_USB_COMMON=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

179
target/linux/ramips/rt3883/config-3.10
View file

@ -1,179 +0,0 @@
CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_RT3883_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=m
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MII is not set
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_UIMAGE_SPLIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_MDIO=y
CONFIG_NET_RALINK_MDIO_RT2880=y
CONFIG_NLS=m
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_DEVICE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINMUX=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_SAMSUNG_USBPHY is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
CONFIG_SOC_RT3883=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_RT2880=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB=m
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_COMMON=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0