ramips: add Poray M4 4M/8M support

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
This commit is contained in:
John Crispin 2013-08-01 14:30:58 +00:00
parent 23d3b705df
commit 0dc3b44b0d
9 changed files with 222 additions and 2 deletions

View file

@ -55,6 +55,9 @@ get_status_led() {
m3)
status_led="m3:blue:status"
;;
m4)
status_led="m4:blue:status"
;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;

View file

@ -226,7 +226,8 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
m3)
m3 |\
m4)
lan_mac=$(mtd_get_mac_binary factory 4)
lan_mac=$(macaddr_add "$lan_mac" -1)
;;

View file

@ -75,7 +75,8 @@ preinit_set_mac_address() {
mac=$(mtd_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
m3)
m3 |\
m4)
mac=$(mtd_get_mac_binary factory 4)
mac=$(macaddr_add "$mac" -1)
ifconfig eth0 hw ether $mac 2>/dev/null

View file

@ -151,6 +151,9 @@ ramips_board_detect() {
*"Poray M3")
name="m3"
;;
*"Poray M4")
name="m4"
;;
*"PWH2004")
name="pwh2004"
;;

View file

@ -45,6 +45,7 @@ platform_check_image() {
hw550-3g | \
hg255d | \
m3 | \
m4 | \
mofi3500-3gn | \
mpr-a1 | \
mpr-a2 | \

View file

@ -0,0 +1,99 @@
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "M4", "ralink,rt5350-soc";
model = "Poray M4";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "pm25lq032";
reg = <0 0>;
linux,modalias = "m25p80", "pm25lq032";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
ralink,led_polarity = <1>;
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "m4:blue:status";
gpios = <&gpio0 9 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
wmac@10180000 {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};

View file

@ -0,0 +1,99 @@
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "M4", "ralink,rt5350-soc";
model = "Poray M4";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "gd25q64";
reg = <0 0>;
linux,modalias = "m25p80", "gd25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x2f>;
ralink,led_polarity = <1>;
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "m4:blue:status";
gpios = <&gpio0 9 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
wmac@10180000 {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
};

View file

@ -376,6 +376,8 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
@ -511,6 +513,7 @@ define Image/Build/Profile/Default
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/M3,$(1))
$(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))

View file

@ -15,3 +15,13 @@ define Profile/M3/Description
endef
$(eval $(call Profile,M3))
define Profile/M4
NAME:=Poray M4
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer
endef
define Profile/M4/Description
Package set for Poray M4 board
endef
$(eval $(call Profile,M4))