KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ramips: Support for RAMIPS based Tripmate HT-TM02 board

Browse source 
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
This commit is contained in:
John Crispin 2014-10-06 04:52:07 +00:00
parent 7ab5357280
commit b04bb3eea7
8 changed files with 153 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
target/linux/ramips/base-files/etc/board.d/01_leds
View file

@ -112,6 +112,10 @@ case $board in
hlk-rm04)
set_wifi_led "rt2800pci-phy0::radio"
;;
ht-tm02)
ucidef_set_led_netdev "eth" "ETH" "ht-tm02:white:status" "eth0"
set_wifi_led "ht-tm02:blue:wifi"
;;
all0239-3g|\
hw550-3g)
set_usb_led "hw550-3g:green:usb"

7
target/linux/ramips/base-files/etc/board.d/02_network
View file

@ -97,6 +97,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "2" "4 9t"
;;
ht-tm02)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "4 6t"
;;
3g-6200n | \
dir-610-a1 | \
dir-300-b7 | \
@ -253,6 +259,7 @@ ramips_setup_macs()
hlk-rm04 | \
mpr-a1 | \
mpr-a2 | \
ht-tm02 | \
dir-300-b7 | \
dir-320-b1 | \
psr-680w |\

3
target/linux/ramips/base-files/etc/diag.sh
View file

@ -63,6 +63,9 @@ get_status_led() {
hlk-rm04)
status_led="hlk-rm04:red:power"
;;
ht-tm02)
status_led="ht-tm02:white:status"
;;
all0239-3g|\
hw550-3g)
status_led="hw550-3g:green:status"

3
target/linux/ramips/base-files/lib/ramips.sh
View file

@ -157,6 +157,9 @@ ramips_board_detect() {
*"HILINK HLK-RM04")
name="hlk-rm04"
;;
*"HOOTOO HT-TM02")
name="ht-tm02"
;;
*"HAME MPR-A1")
name="mpr-a1"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
View file

@ -52,6 +52,7 @@ platform_check_image() {
hw550-3g | \
hg255d | \
hlk-rm04 | \
ht-tm02 | \
ip2202 | \
m3 | \
m4 | \

104
target/linux/ramips/dts/HT-TM02.dts Normal file
View file

@ -0,0 +1,104 @@
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "HT-TM02", "ralink,rt5350-soc";
model = "HOOTOO HT-TM02";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
ralink,portmap = <0x3f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "ht-tm02:blue:wifi";
gpios = <&gpio0 7 1>;
};
status {
label = "ht-tm02:yellow:status";
gpios = <&gpio0 12 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
};

3
target/linux/ramips/image/Makefile
View file

@ -434,6 +434,8 @@ define BuildFirmware/HLKRM04/initramfs
endef
Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02)
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@ -598,6 +600,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HLKRM04,$(1))
$(call Image/Build/Profile/HT-TM02,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))

28
target/linux/ramips/rt305x/profiles/hootoo.mk Normal file
View file

@ -0,0 +1,28 @@
#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/HT-TM02
NAME:=HOOTOO HT-TM02
PACKAGES:=\
wpad-mini \
kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio kmod-ledtrig-default-on \
kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net usbutils \
kmod-scsi-core kmod-scsi-generic kmod-fs-ext4 \
kmod-usb-storage kmod-usb-storage-extras block-mount \
kmod-usb-serial kmod-usb-serial-ftdi kmod-gpio-button-hotplug \
kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 luci luci-mod-admin-full \
kmod-app-samba luci-theme-openwrt luci-proto-relay relayd nano \
fstools
endef
define Profile/HT-TM02/Description
Package set for HOOTOO HT-TM02 board
endef
$(eval $(call Profile,HT-TM02))