kernel/3.10: refresh all target patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38182
2013-09-25 17:13:24 +00:00 · 2013-09-25 17:13:24 +00:00 · 0380904acb
commit 0380904acb
parent 76a1617063
48 changed files with 199 additions and 564 deletions
--- a/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch
+++ b/target/linux/ar71xx/patches-3.10/404-mtd-wrt160nl-trx-parser.patch
@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -176,6 +176,12 @@ config MTD_BCM47XX_PARTS
+@@ -208,6 +208,12 @@ config MTD_BCM47XX_PARTS
 	  This provides partitions parser for devices based on BCM47xx
 	  boards.
 
@ -15,7 +15,7 @@
 	depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
 obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
 obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
 obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
--- a/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch
+++ b/target/linux/ar71xx/patches-3.10/405-mtd-tp-link-partition-parser.patch
@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -178,7 +178,7 @@ config MTD_BCM47XX_PARTS
+@@ -210,7 +210,7 @@ config MTD_BCM47XX_PARTS
 
 config MTD_WRT160NL_PARTS
 	tristate "Linksys WRT160NL partitioning support"
@ -9,7 +9,7 @@
 	---help---
 	   Linksys WRT160NL partitioning support
 
-@@ -198,6 +198,12 @@ config MTD_MYLOADER_PARTS
+@@ -230,6 +230,12 @@ config MTD_MYLOADER_PARTS
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically.
 
@ -24,7 +24,7 @@
 config MTD_BLKDEVS
 --- a/drivers/mtd/Makefile
 +++ b/drivers/mtd/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
 obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
 obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
 obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
--- a/target/linux/atheros/patches-3.10/130-watchdog.patch
+++ b/target/linux/atheros/patches-3.10/130-watchdog.patch
@ -202,7 +202,7 @@
 +module_exit(exit_ar2315_wdt);
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -1104,6 +1104,12 @@ config LANTIQ_WDT
+@@ -1113,6 +1113,12 @@ config LANTIQ_WDT
 	help
 	  Hardware driver for the Lantiq SoC Watchdog Timer.
 
@ -217,7 +217,7 @@
 # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -130,6 +130,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+@@ -131,6 +131,7 @@ obj-$(CONFIG_GPIO_WDT) += gpio_wdt.o
 obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
--- a/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
+++ b/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
@ -45,11 +45,9 @@ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
 include/linux/of_address.h | 48 +++++++++++++++++++++++++++++++++
 2 files changed, 115 insertions(+)

-diff --git a/drivers/of/address.c b/drivers/of/address.c
-index 04da786..fdd0636 100644
 --- a/drivers/of/address.c
 +++ b/drivers/of/address.c
-@@ -227,6 +227,73 @@ int of_pci_address_to_resource(struct device_node *dev, int bar,
+@@ -231,6 +231,73 @@ int of_pci_address_to_resource(struct de
 	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
@ -123,8 +121,6 @@ index 04da786..fdd0636 100644
 #endif /* CONFIG_PCI */
 
 /*
-diff --git a/include/linux/of_address.h b/include/linux/of_address.h
-index 0506eb5..4c2e6f2 100644
 --- a/include/linux/of_address.h
 +++ b/include/linux/of_address.h
@@ -4,6 +4,36 @@
@ -164,7 +160,7 @@ index 0506eb5..4c2e6f2 100644
 #ifdef CONFIG_OF_ADDRESS
 extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
 extern bool of_can_translate_address(struct device_node *dev);
-@@ -27,6 +57,11 @@ static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
+@@ -27,6 +57,11 @@ static inline unsigned long pci_address_
 #define pci_address_to_pio pci_address_to_pio
 #endif
 
@ -176,7 +172,7 @@ index 0506eb5..4c2e6f2 100644
 #else /* CONFIG_OF_ADDRESS */
 #ifndef of_address_to_resource
 static inline int of_address_to_resource(struct device_node *dev, int index,
-@@ -53,6 +88,19 @@ static inline const __be32 *of_get_address(struct device_node *dev, int index,
+@@ -53,6 +88,19 @@ static inline const __be32 *of_get_addre
 {
 	return NULL;
 }
@ -196,6 +192,3 @@ index 0506eb5..4c2e6f2 100644
 #endif /* CONFIG_OF_ADDRESS */
 
 
-- 
-1.8.4
-
--- a/target/linux/imx6/patches-3.10/0010-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
+++ b/target/linux/imx6/patches-3.10/0010-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
@ -10,8 +10,6 @@ Signed-off-by: Sean Cross <xobs@kosagi.com>
 arch/arm/mach-imx/clk-imx6q.c                      |   20 +++++++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

-diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
-index 9181a24..d94be84 100644
 --- a/arch/arm/mach-imx/clk-imx6q.c
 +++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -205,6 +205,11 @@ static const char *vpu_axi_sels[]	= { "a
@ -36,7 +34,7 @@ index 9181a24..d94be84 100644
 };
 
 static struct clk *clk[clk_max];
-@@ -340,6 +347,18 @@ int __init mx6q_clocks_init(void)
+@@ -340,6 +346,18 @@ int __init mx6q_clocks_init(void)
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
 			&imx_ccm_lock);
 
--- a/target/linux/imx6/patches-3.10/0011-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
+++ b/target/linux/imx6/patches-3.10/0011-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
@ -8,8 +8,6 @@ Signed-off-by: Sean Cross <xobs@kosagi.com>
 include/linux/mfd/syscon/imx6q-iomuxc-gpr.h |    8 ++++++++
 1 file changed, 8 insertions(+)

-diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-index b6bdcd6..e00e9f3 100644
 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
 +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -241,6 +241,12 @@
--- a/target/linux/imx6/patches-3.10/0012-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
+++ b/target/linux/imx6/patches-3.10/0012-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
@ -17,12 +17,10 @@ Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
 7 files changed, 611 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pci/host/pci-imx6.c

-diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
-index ccd55c2..125202e 100644
 --- a/arch/arm/boot/dts/imx6qdl.dtsi
 +++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -116,6 +116,22 @@
- 			arm,data-latency = <4 2 3>;
+@@ -108,6 +108,22 @@
+ 			cache-level = <2>;
 		};
 
 +		pcie: pcie@0x01000000 {
@ -44,11 +42,9 @@ index ccd55c2..125202e 100644
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
 			interrupts = <0 94 0x04>;
-diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index 29a8af6..e6ac281 100644
 --- a/arch/arm/mach-imx/Kconfig
 +++ b/arch/arm/mach-imx/Kconfig
-@@ -801,6 +801,8 @@ config SOC_IMX6Q
+@@ -806,6 +806,8 @@ config SOC_IMX6Q
 	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
@ -57,13 +53,11 @@ index 29a8af6..e6ac281 100644
 	select PINCTRL
 	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
-diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
-index d94be84..6956995 100644
 --- a/arch/arm/mach-imx/clk-imx6q.c
 +++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -621,6 +621,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
- 	if (ret)
- 		pr_warn("failed to set up CLKO: %d\n", ret);
+@@ -586,6 +586,10 @@ int __init mx6q_clocks_init(void)
+ 		clk_prepare_enable(clk[usbphy2_gate]);
+ 	}
 
 +	/* All existing boards with PCIe use LVDS1 */
 +	if (IS_ENABLED(CONFIG_PCI_IMX6))
--- a/target/linux/imx6/patches-3.10/011-pci-tweaks.patch
+++ b/target/linux/imx6/patches-3.10/011-pci-tweaks.patch
@ -11,7 +11,7 @@
 		};
 --- a/drivers/pci/host/pci-imx6.c
 +++ b/drivers/pci/host/pci-imx6.c
-@@ -200,12 +200,6 @@
+@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
 static int imx6q_pcie_abort_handler(unsigned long addr,
 		unsigned int fsr, struct pt_regs *regs)
 {
@ -24,7 +24,7 @@
 	return 0;
 }
 
-@@ -322,7 +316,7 @@
+@@ -322,7 +316,7 @@ static void imx6_pcie_host_init(struct p
 			IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
 
 	while (!dw_pcie_link_up(pp)) {
--- a/target/linux/lantiq/patches-3.10/0001-MIPS-lantiq-add-pcie-driver.patch
+++ b/target/linux/lantiq/patches-3.10/0001-MIPS-lantiq-add-pcie-driver.patch
@ -38,8 +38,6 @@ Subject: [PATCH 01/34] MIPS: lantiq: add pcie driver
 create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
 create mode 100644 arch/mips/pci/pcie-lantiq.h

-diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
-index c002191..1621b1d 100644
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
@@ -17,6 +17,7 @@ config SOC_XWAY
@ -66,8 +64,6 @@ index c002191..1621b1d 100644
 config XRX200_PHY_FW
 	bool "XRX200 PHY firmware loader"
 	depends on SOC_XWAY
-diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
-index c24924f..e30dde8 100644
 --- a/arch/mips/lantiq/xway/sysctrl.c
 +++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
@ -79,11 +75,9 @@ index c24924f..e30dde8 100644
 	} else if (of_machine_is_compatible("lantiq,ar9")) {
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz(), CLOCK_250M);
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 2cb1d31..8ba7fff 100644
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
+@@ -41,6 +41,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
@ -92,9 +86,6 @@ index 2cb1d31..8ba7fff 100644
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-diff --git a/arch/mips/pci/fixup-lantiq-pcie.c b/arch/mips/pci/fixup-lantiq-pcie.c
-new file mode 100644
-index 0000000..3325e24
 --- /dev/null
 +++ b/arch/mips/pci/fixup-lantiq-pcie.c
@@ -0,0 +1,82 @@
@ -180,8 +171,6 @@ index 0000000..3325e24
 +
 +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
 +     ifx_pcie_rc_class_early_fixup);
-diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
-index 6c829df..50ec0b5 100644
 --- a/arch/mips/pci/fixup-lantiq.c
 +++ b/arch/mips/pci/fixup-lantiq.c
@@ -11,11 +11,12 @@
@ -198,7 +187,7 @@ index 6c829df..50ec0b5 100644
 
 	if (ltq_pci_plat_dev_init)
 		return ltq_pci_plat_dev_init(dev);
-@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct
 	struct of_irq dev_irq;
 	int irq;
 
@ -207,9 +196,6 @@ index 6c829df..50ec0b5 100644
 	if (of_irq_map_pci(dev, &dev_irq)) {
 		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
 			slot, pin);
-diff --git a/arch/mips/pci/ifxmips_pci_common.h b/arch/mips/pci/ifxmips_pci_common.h
-new file mode 100644
-index 0000000..46f4cb2
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pci_common.h
@@ -0,0 +1,57 @@
@ -270,9 +256,6 @@ index 0000000..46f4cb2
 +
 +#endif /* IFXMIPS_PCI_COMMON_H */
 +
-diff --git a/arch/mips/pci/ifxmips_pcie.c b/arch/mips/pci/ifxmips_pcie.c
-new file mode 100644
-index 0000000..4128898
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie.c
@@ -0,0 +1,1099 @@
@ -1375,9 +1358,6 @@ index 0000000..4128898
 +MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
 +MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
 +
-diff --git a/arch/mips/pci/ifxmips_pcie.h b/arch/mips/pci/ifxmips_pcie.h
-new file mode 100644
-index 0000000..c6f92f5
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie.h
@@ -0,0 +1,135 @@
@ -1516,9 +1496,6 @@ index 0000000..c6f92f5
 +
 +#endif  /* IFXMIPS_PCIE_H */
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_ar10.h b/arch/mips/pci/ifxmips_pcie_ar10.h
-new file mode 100644
-index 0000000..99ff463
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_ar10.h
@@ -0,0 +1,290 @@
@ -1812,9 +1789,6 @@ index 0000000..99ff463
 +}
 +
 +#endif /* IFXMIPS_PCIE_AR10_H */
-diff --git a/arch/mips/pci/ifxmips_pcie_msi.c b/arch/mips/pci/ifxmips_pcie_msi.c
-new file mode 100644
-index 0000000..bffd6fa
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_msi.c
@@ -0,0 +1,392 @@
@ -2210,9 +2184,6 @@ index 0000000..bffd6fa
 +MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
 +MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_phy.c b/arch/mips/pci/ifxmips_pcie_phy.c
-new file mode 100644
-index 0000000..f5b0f13
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_phy.c
@@ -0,0 +1,478 @@
@ -2694,9 +2665,6 @@ index 0000000..f5b0f13
 +#endif
 +}
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_pm.c b/arch/mips/pci/ifxmips_pcie_pm.c
-new file mode 100644
-index 0000000..a10ecad
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_pm.c
@@ -0,0 +1,176 @@
@ -2876,9 +2844,6 @@ index 0000000..a10ecad
 +    ifx_pmcu_unregister(&pmcuUnRegister);
 +}
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_pm.h b/arch/mips/pci/ifxmips_pcie_pm.h
-new file mode 100644
-index 0000000..6ece20d
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_pm.h
@@ -0,0 +1,36 @@
@ -2918,9 +2883,6 @@ index 0000000..6ece20d
 +
 +#endif /* IFXMIPS_PCIE_PM_H  */
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_reg.h b/arch/mips/pci/ifxmips_pcie_reg.h
-new file mode 100644
-index 0000000..e7e4b6c
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_reg.h
@@ -0,0 +1,1001 @@
@ -3925,9 +3887,6 @@ index 0000000..e7e4b6c
 +
 +#endif /* IFXMIPS_PCIE_REG_H */
 +
-diff --git a/arch/mips/pci/ifxmips_pcie_vr9.h b/arch/mips/pci/ifxmips_pcie_vr9.h
-new file mode 100644
-index 0000000..57d9368
 --- /dev/null
 +++ b/arch/mips/pci/ifxmips_pcie_vr9.h
@@ -0,0 +1,271 @@
@ -4202,8 +4161,6 @@ index 0000000..57d9368
 +
 +#endif /* IFXMIPS_PCIE_VR9_H */
 +
-diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
-index 594e60d..2e75400 100644
 --- a/arch/mips/pci/pci.c
 +++ b/arch/mips/pci/pci.c
@@ -266,6 +266,31 @@ static int __init pcibios_init(void)
@ -4238,9 +4195,6 @@ index 594e60d..2e75400 100644
 static int pcibios_enable_resources(struct pci_dev *dev, int mask)
 {
 	u16 cmd, old_cmd;
-diff --git a/arch/mips/pci/pcie-lantiq.h b/arch/mips/pci/pcie-lantiq.h
-new file mode 100644
-index 0000000..d877c23
 --- /dev/null
 +++ b/arch/mips/pci/pcie-lantiq.h
@@ -0,0 +1,1305 @@
@ -5549,8 +5503,6 @@ index 0000000..d877c23
 +
 +#endif /* IFXMIPS_PCIE_VR9_H */
 +
-diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
-index 50e94e0..4bf848f 100644
 --- a/drivers/pci/pcie/aer/Kconfig
 +++ b/drivers/pci/pcie/aer/Kconfig
@@ -5,7 +5,7 @@
@ -5562,11 +5514,9 @@ index 50e94e0..4bf848f 100644
 	help
 	  This enables PCI Express Root Port Advanced Error Reporting
 	  (AER) driver support. Error reporting messages sent to Root
-diff --git a/include/linux/pci.h b/include/linux/pci.h
-index 3a24e4f..25b0349 100644
 --- a/include/linux/pci.h
 +++ b/include/linux/pci.h
-@@ -1082,6 +1082,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+@@ -1082,6 +1082,8 @@ void pci_walk_bus(struct pci_bus *top, i
 int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
@ -5575,8 +5525,6 @@ index 3a24e4f..25b0349 100644
 void pci_setup_bridge(struct pci_bus *bus);
 resource_size_t pcibios_window_alignment(struct pci_bus *bus,
 					 unsigned long type);
-diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
-index c129162..c503ac9 100644
 --- a/include/linux/pci_ids.h
 +++ b/include/linux/pci_ids.h
@@ -1042,6 +1042,12 @@
@ -5592,6 +5540,3 @@ index c129162..c503ac9 100644
 #define PCI_VENDOR_ID_WINBOND		0x10ad
 #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
 #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0002-MIPS-lantiq-adds-minimal-dcdc-driver.patch
+++ b/target/linux/lantiq/patches-3.10/0002-MIPS-lantiq-adds-minimal-dcdc-driver.patch
@ -15,8 +15,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5677/
 2 files changed, 64 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/lantiq/xway/dcdc.c

-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 7a13660..087497d 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,3 @@
@ -24,9 +22,6 @@ index 7a13660..087497d 100644
 +obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
 
 obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
-new file mode 100644
-index 0000000..7688ac0
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/dcdc.c
@@ -0,0 +1,63 @@
@ -93,6 +88,3 @@ index 0000000..7688ac0
 +}
 +
 +arch_initcall(dcdc_init);
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0004-MIPS-lantiq-falcon-add-cpu-feature-override.h.patch
+++ b/target/linux/lantiq/patches-3.10/0004-MIPS-lantiq-falcon-add-cpu-feature-override.h.patch
@ -15,9 +15,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5658/
 1 file changed, 58 insertions(+)
 create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h

-diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
-new file mode 100644
-index 0000000..096a100
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
@@ -0,0 +1,58 @@
@ -79,6 +76,3 @@ index 0000000..096a100
 +#define cpu_icache_line_size()	32
 +
 +#endif /* __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H */
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0005-MIPS-lantiq-falcon-fix-asc-clock-definition.patch
+++ b/target/linux/lantiq/patches-3.10/0005-MIPS-lantiq-falcon-fix-asc-clock-definition.patch
@ -14,8 +14,6 @@ Patchwork: http://patchwork.linux-mips.org/patch/5659/
 arch/mips/lantiq/falcon/sysctrl.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

-diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
-index ff4894a..8f1866d 100644
 --- a/arch/mips/lantiq/falcon/sysctrl.c
 +++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -48,6 +48,7 @@
@ -26,7 +24,7 @@ index ff4894a..8f1866d 100644
 #define ACTS_ASC1_ACT	0x00000800
 #define ACTS_I2C_ACT	0x00004000
 #define ACTS_P0		0x00010000
-@@ -108,6 +109,7 @@ static void sysctl_deactivate(struct clk *clk)
+@@ -108,6 +109,7 @@ static void sysctl_deactivate(struct clk
 static int sysctl_clken(struct clk *clk)
 {
 	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
@ -43,6 +41,3 @@ index ff4894a..8f1866d 100644
 +	clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
 	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
 }
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0006-MIPS-lantiq-dtb-image-hack.patch
+++ b/target/linux/lantiq/patches-3.10/0006-MIPS-lantiq-dtb-image-hack.patch
@ -9,8 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 arch/mips/lantiq/prom.c   |    4 +++-
 2 files changed, 3 insertions(+), 3 deletions(-)

-diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
-index d6bdc57..690257a 100644
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
@@ -6,8 +6,6 @@
@ -22,11 +20,9 @@ index d6bdc57..690257a 100644
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
 obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
-diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
-index 9f9e875..72b183a 100644
 --- a/arch/mips/lantiq/prom.c
 +++ b/arch/mips/lantiq/prom.c
-@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(void)
+@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(voi
 	}
 }
 
@ -44,6 +40,3 @@ index 9f9e875..72b183a 100644
 }
 
 void __init device_tree_init(void)
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0007-MIPS-lantiq-handle-vmmc-memory-reservation.patch
+++ b/target/linux/lantiq/patches-3.10/0007-MIPS-lantiq-handle-vmmc-memory-reservation.patch
@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 2 files changed, 65 insertions(+)
 create mode 100644 arch/mips/lantiq/xway/vmmc.c

-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index 087497d..a2edc53 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,5 @@
@ -20,9 +18,6 @@ index 087497d..a2edc53 100644
 +obj-y += vmmc.o
 +
 obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
-new file mode 100644
-index 0000000..6dedf77
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/vmmc.c
@@ -0,0 +1,63 @@
@ -89,6 +84,3 @@ index 0000000..6dedf77
 +};
 +
 +module_platform_driver(vmmc_driver);
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0009-MIPS-lantiq-add-atm-hack.patch
+++ b/target/linux/lantiq/patches-3.10/0009-MIPS-lantiq-add-atm-hack.patch
@ -16,9 +16,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
 create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h

-diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_atm.h b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
-new file mode 100644
-index 0000000..bf045a9
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
@@ -0,0 +1,196 @@
@ -218,9 +215,6 @@ index 0000000..bf045a9
 +
 +#endif  //  IFX_ATM_H
 +
-diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-new file mode 100644
-index 0000000..698e5c3
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
@@ -0,0 +1,203 @@
@ -427,8 +421,6 @@ index 0000000..698e5c3
 +
 +#endif  //  IFX_PTM_H
 +
-diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
-index 5119487..6d2c486 100644
 --- a/arch/mips/lantiq/irq.c
 +++ b/arch/mips/lantiq/irq.c
@@ -14,6 +14,7 @@
@ -439,7 +431,7 @@ index 5119487..6d2c486 100644
 
 #include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
-@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_data *d)
+@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
 	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
 	ltq_icu_w32(im, BIT(offset), isr);
 }
@ -447,11 +439,9 @@ index 5119487..6d2c486 100644
 
 static void ltq_ack_irq(struct irq_data *d)
 {
-diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
-index 5aeb3eb..11aa4e6 100644
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,8 @@ void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s
 void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 
 EXPORT_SYMBOL(_dma_cache_wback_inv);
@ -460,8 +450,6 @@ index 5aeb3eb..11aa4e6 100644
 
 #endif /* CONFIG_DMA_NONCOHERENT */
 
-diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
-index 88399db..78c8bbc 100644
 --- a/include/uapi/linux/atm.h
 +++ b/include/uapi/linux/atm.h
@@ -130,8 +130,14 @@
@ -479,11 +467,9 @@ index 88399db..78c8bbc 100644
 struct atm_trafprm {
 	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
 	int		max_pcr;	/* maximum PCR in cells per second */
-diff --git a/net/atm/common.c b/net/atm/common.c
-index 737bef5..959008d 100644
 --- a/net/atm/common.c
 +++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct sock *sk)
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
 	write_unlock_irq(&vcc_sklist_lock);
 }
 
@ -501,11 +487,9 @@ index 737bef5..959008d 100644
 	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
 			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
-diff --git a/net/atm/proc.c b/net/atm/proc.c
-index bbb6461..ecb584a 100644
 --- a/net/atm/proc.c
 +++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
 static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
 {
 	static const char *const class_name[] = {
@ -514,6 +498,3 @@ index bbb6461..ecb584a 100644
 	static const char *const aal_name[] = {
 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
 		"???",	"5",	"???",	"???",	/*  4- 7 */
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0010-MIPS-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-3.10/0010-MIPS-lantiq-wifi-and-ethernet-eeprom-handling.patch
@ -17,10 +17,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
 create mode 100644 arch/mips/lantiq/xway/rt_eep.c

-Index: linux-3.10.12/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.12/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h	2013-09-17 22:32:50.385021711 +0200
+--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
@@ -0,0 +1,6 @@
 +#ifndef _PCI_ATH_FIXUP
 +#define _PCI_ATH_FIXUP
@ -28,11 +26,9 @@ Index: linux-3.10.12/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
 +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
 +
 +#endif /* _PCI_ATH_FIXUP */
-Index: linux-3.10.12/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-===================================================================
--- linux-3.10.12.orig/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h	2013-09-14 15:55:12.000000000 +0200
-+++ linux-3.10.12/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h	2013-09-17 22:32:50.389021711 +0200
-@@ -90,5 +90,8 @@
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
 extern void ltq_pmu_enable(unsigned int module);
 extern void ltq_pmu_disable(unsigned int module);
 
@ -41,21 +37,17 @@ Index: linux-3.10.12/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +
 #endif /* CONFIG_SOC_TYPE_XWAY */
 #endif /* _LTQ_XWAY_H__ */
-Index: linux-3.10.12/arch/mips/lantiq/xway/Makefile
-===================================================================
--- linux-3.10.12.orig/arch/mips/lantiq/xway/Makefile	2013-09-17 22:32:50.305021707 +0200
-+++ linux-3.10.12/arch/mips/lantiq/xway/Makefile	2013-09-18 02:41:31.613659574 +0200
-@@ -2,4 +2,6 @@
+--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
+@@ -2,4 +2,6 @@ obj-y := prom.o sysctrl.o clk.o reset.o
 
 obj-y += vmmc.o
 
 +obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
 +
 obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-Index: linux-3.10.12/arch/mips/lantiq/xway/ath_eep.c
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.12/arch/mips/lantiq/xway/ath_eep.c	2013-09-18 02:41:28.525659442 +0200
+--- /dev/null
+++ b/arch/mips/lantiq/xway/ath_eep.c
@@ -0,0 +1,250 @@
 +/*
 + *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
@ -307,10 +299,8 @@ Index: linux-3.10.12/arch/mips/lantiq/xway/ath_eep.c
 +	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
 +}
 +device_initcall(of_ath5k_eeprom_init);
-Index: linux-3.10.12/arch/mips/lantiq/xway/pci-ath-fixup.c
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.12/arch/mips/lantiq/xway/pci-ath-fixup.c	2013-09-17 22:32:50.389021711 +0200
+--- /dev/null
+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
@@ -0,0 +1,109 @@
 +/*
 + *  Atheros AP94 reference board PCI initialization
@ -421,10 +411,8 @@ Index: linux-3.10.12/arch/mips/lantiq/xway/pci-ath-fixup.c
 +	ath_fixups[ath_num_fixups].cal_data = cal_data;
 +	ath_num_fixups++;
 +}
-Index: linux-3.10.12/arch/mips/lantiq/xway/rt_eep.c
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.12/arch/mips/lantiq/xway/rt_eep.c	2013-09-17 22:32:50.389021711 +0200
+--- /dev/null
+++ b/arch/mips/lantiq/xway/rt_eep.c
@@ -0,0 +1,60 @@
 +/*
 + *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
--- a/target/linux/lantiq/patches-3.10/0011-MIPS-lantiq-add-reset-controller-api-support.patch
+++ b/target/linux/lantiq/patches-3.10/0011-MIPS-lantiq-add-reset-controller-api-support.patch
@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 arch/mips/lantiq/xway/reset.c |   61 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

-diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
-index 1fa0f17..a1e06b7 100644
 --- a/arch/mips/lantiq/xway/reset.c
 +++ b/arch/mips/lantiq/xway/reset.c
@@ -14,6 +14,7 @@
@ -23,7 +21,7 @@ index 1fa0f17..a1e06b7 100644
 
 #include <asm/reboot.h>
 
-@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module, ulong u)
+@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module,
 	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
 }
 
@ -90,6 +88,3 @@ index 1fa0f17..a1e06b7 100644
 static void ltq_machine_restart(char *command)
 {
 	local_irq_disable();
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0012-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ b/target/linux/lantiq/patches-3.10/0012-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@ -12,11 +12,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/mtd/devices/m25p80.c |    5 +++++
 1 file changed, 5 insertions(+)

-diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
-index 2f3d2a5..1828704 100644
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -909,10 +909,13 @@ static int m25p_probe(struct spi_device *spi)
+@@ -925,10 +925,13 @@ static int m25p_probe(struct spi_device
 	unsigned			i;
 	struct mtd_part_parser_data	ppdata;
 	struct device_node __maybe_unused *np = spi->dev.of_node;
@ -30,7 +28,7 @@ index 2f3d2a5..1828704 100644
 #endif
 
 	/* Platform data helps sort out which chip type we have, as
-@@ -988,6 +991,8 @@ static int m25p_probe(struct spi_device *spi)
+@@ -1004,6 +1007,8 @@ static int m25p_probe(struct spi_device
 
 	if (data && data->name)
 		flash->mtd.name = data->name;
@ -39,6 +37,3 @@ index 2f3d2a5..1828704 100644
 	else
 		flash->mtd.name = dev_name(&spi->dev);
 
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.10/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
@ -16,8 +16,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 3 files changed, 92 insertions(+)
 create mode 100644 drivers/mtd/nand/falcon_nand.c

-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index a60f6c1..74b1323 100644
 --- a/drivers/mtd/nand/Kconfig
 +++ b/drivers/mtd/nand/Kconfig
@@ -544,4 +544,12 @@ config MTD_NAND_XWAY
@ -33,20 +31,15 @@ index a60f6c1..74b1323 100644
 +	  attached to the External Bus Unit (EBU).
 +
 endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index bb81891..feb7c9d 100644
 --- a/drivers/mtd/nand/Makefile
 +++ b/drivers/mtd/nand/Makefile
-@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
+@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740
 obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
 obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
 obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 +obj-$(CONFIG_MTD_NAND_FALCON)		+= falcon_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/falcon_nand.c b/drivers/mtd/nand/falcon_nand.c
-new file mode 100644
-index 0000000..13458d3
 --- /dev/null
 +++ b/drivers/mtd/nand/falcon_nand.c
@@ -0,0 +1,83 @@
@ -133,6 +126,3 @@ index 0000000..13458d3
 +}
 +
 +arch_initcall(falcon_register_nand);
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0014-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ b/target/linux/lantiq/patches-3.10/0014-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@ -7,11 +7,9 @@ Subject: [PATCH 14/34] MTD: lantiq: handle NO_XIP on cfi0001 flash
 drivers/mtd/maps/lantiq-flash.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

-diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
-index d7ac65d..95b155a 100644
 --- a/drivers/mtd/maps/lantiq-flash.c
 +++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -134,7 +134,11 @@ ltq_mtd_probe(struct platform_device *pdev)
+@@ -134,7 +134,11 @@ ltq_mtd_probe(struct platform_device *pd
 	}
 
 	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
@ -24,6 +22,3 @@ index d7ac65d..95b155a 100644
 	ltq_mtd->map->size = resource_size(ltq_mtd->res);
 	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
 	if (IS_ERR(ltq_mtd->map->virt)) {
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0015-MTD-lantiq-xway-fix-invalid-operator.patch
+++ b/target/linux/lantiq/patches-3.10/0015-MTD-lantiq-xway-fix-invalid-operator.patch
@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/mtd/nand/xway_nand.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
-index 3f81dc8..169a91d 100644
 --- a/drivers/mtd/nand/xway_nand.c
 +++ b/drivers/mtd/nand/xway_nand.c
-@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
+@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru
 	int ret;
 
 	spin_lock_irqsave(&ebu_lock, flags);
@ -24,6 +22,3 @@ index 3f81dc8..169a91d 100644
 	spin_unlock_irqrestore(&ebu_lock, flags);
 
 	return ret;
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0016-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
+++ b/target/linux/lantiq/patches-3.10/0016-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
@ -9,8 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/mtd/nand/xway_nand.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

-diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
-index 169a91d..7f2bdd1 100644
 --- a/drivers/mtd/nand/xway_nand.c
 +++ b/drivers/mtd/nand/xway_nand.c
@@ -54,6 +54,8 @@
@ -22,7 +20,7 @@ index 169a91d..7f2bdd1 100644
 static void xway_reset_chip(struct nand_chip *chip)
 {
 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf
 	unsigned long flags;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
@ -44,6 +42,3 @@ index 169a91d..7f2bdd1 100644
 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
 			;
 		spin_unlock_irqrestore(&ebu_lock, flags);
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0017-MTD-lantiq-xway-remove-endless-loop.patch
+++ b/target/linux/lantiq/patches-3.10/0017-MTD-lantiq-xway-remove-endless-loop.patch
@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/mtd/nand/xway_nand.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

-diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
-index 7f2bdd1..8d14f1b 100644
 --- a/drivers/mtd/nand/xway_nand.c
 +++ b/drivers/mtd/nand/xway_nand.c
@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
@ -41,6 +39,3 @@ index 7f2bdd1..8d14f1b 100644
 	spin_unlock_irqrestore(&ebu_lock, flags);
 }
 
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0018-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
+++ b/target/linux/lantiq/patches-3.10/0018-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
@ -9,11 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/mtd/nand/xway_nand.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

-diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
-index 8d14f1b..f813a55 100644
 --- a/drivers/mtd/nand/xway_nand.c
 +++ b/drivers/mtd/nand/xway_nand.c
-@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
+@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru
 	return ret;
 }
 
@ -46,7 +44,7 @@ index 8d14f1b..f813a55 100644
 static int xway_nand_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this = platform_get_drvdata(pdev);
-@@ -181,6 +207,8 @@ static struct platform_nand_data xway_nand_data = {
+@@ -181,6 +207,8 @@ static struct platform_nand_data xway_na
 		.dev_ready	= xway_dev_ready,
 		.select_chip	= xway_select_chip,
 		.read_byte	= xway_read_byte,
@ -55,6 +53,3 @@ index 8d14f1b..f813a55 100644
 	}
 };
 
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0019-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ b/target/linux/lantiq/patches-3.10/0019-NET-lantiq-adds-PHY11G-firmware-blobs.patch
@ -12,11 +12,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 create mode 100644 firmware/lantiq/COPYING
 create mode 100644 firmware/lantiq/README

-diff --git a/firmware/Makefile b/firmware/Makefile
-index cbb09ce..c8697df 100644
 --- a/firmware/Makefile
 +++ b/firmware/Makefile
-@@ -134,6 +134,9 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
+@@ -134,6 +134,9 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
 fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
 fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
@ -26,9 +24,6 @@ index cbb09ce..c8697df 100644
 fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
 
 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
-diff --git a/firmware/lantiq/COPYING b/firmware/lantiq/COPYING
-new file mode 100644
-index 0000000..5ec70b2
 --- /dev/null
 +++ b/firmware/lantiq/COPYING
@@ -0,0 +1,286 @@
@ -318,9 +313,6 @@ index 0000000..5ec70b2
 +POSSIBILITY OF SUCH DAMAGES.
 +
 +		     END OF TERMS AND CONDITIONS
-diff --git a/firmware/lantiq/README b/firmware/lantiq/README
-new file mode 100644
-index 0000000..cb1a10a
 --- /dev/null
 +++ b/firmware/lantiq/README
@@ -0,0 +1,45 @@
@ -369,6 +361,3 @@ index 0000000..cb1a10a
 +# GPHY core on Lantiq XWAY VR9 v1.1
 +lantiq/vr9_phy11g_a2x.bin
 +lantiq/vr9_phy22f_a2x.bin
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ b/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
@ -12,8 +12,6 @@ Subject: [PATCH 20/34] NET: MIPS: lantiq: adds xrx200-net
 create mode 100644 drivers/net/ethernet/lantiq_pce.h
 create mode 100644 drivers/net/ethernet/lantiq_xrx200.c

-diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
-index ed956e0..9261fe4 100644
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
@@ -83,7 +83,13 @@ config LANTIQ_ETOP
@ -31,8 +29,6 @@ index ed956e0..9261fe4 100644
 
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
-diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
-index 8268d85..e8410d8 100644
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/
@ -43,9 +39,6 @@ index 8268d85..e8410d8 100644
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
-diff --git a/drivers/net/ethernet/lantiq_pce.h b/drivers/net/ethernet/lantiq_pce.h
-new file mode 100644
-index 0000000..0c38efe
 --- /dev/null
 +++ b/drivers/net/ethernet/lantiq_pce.h
@@ -0,0 +1,163 @@
@ -212,9 +205,6 @@ index 0000000..0c38efe
 +	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
 +	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
 +};
-diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
-new file mode 100644
-index 0000000..2d40c64
 --- /dev/null
 +++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -0,0 +1,1203 @@
@ -1421,6 +1411,3 @@ index 0000000..2d40c64
 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
 +MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
 +MODULE_LICENSE("GPL");
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0021-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
+++ b/target/linux/lantiq/patches-3.10/0021-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
@ -7,8 +7,6 @@ Subject: [PATCH 21/34] NET: MIPS: lantiq: update etop driver for devicetree
 drivers/net/ethernet/lantiq_etop.c |  501 +++++++++++++++++++++++++-----------
 1 file changed, 355 insertions(+), 146 deletions(-)

-diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
-index bfdb0686..cdc0c0e 100644
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
@@ -12,7 +12,7 @@
@ -35,15 +33,13 @@ index bfdb0686..cdc0c0e 100644
 #define ETOP_MII_REVERSE	0xe
 #define ETOP_PLEN_UNDER		0x40
 #define ETOP_CGEN		0x800
-
+#define ETOP_CFG_MII0		0x01
+ 
 -/* use 2 static channels for TX/RX */
 -#define LTQ_ETOP_TX_CHANNEL	1
 -#define LTQ_ETOP_RX_CHANNEL	6
 -#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
 -#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
-
-+#define ETOP_CFG_MII0		0x01
-+
 +#define LTQ_GBIT_MDIO_CTL	0xCC
 +#define LTQ_GBIT_MDIO_DATA	0xd0
 +#define LTQ_GBIT_GCTL0		0x68
@ -74,7 +70,7 @@ index bfdb0686..cdc0c0e 100644
 +#define MDIO_XR9_REG_OFFSET	0
 +#define MDIO_XR9_ADDR_OFFSET	5
 +#define MDIO_XR9_WR_OFFSET	16
-+
+ 
 +#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
 +			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
 +
@ -142,7 +138,7 @@ index bfdb0686..cdc0c0e 100644
 	if (!ch->skb[ch->dma.desc])
 		return -ENOMEM;
 	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	skb_put(skb, len);
@ -154,7 +150,7 @@ index bfdb0686..cdc0c0e 100644
 }
 
 static int
-@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
 {
 	struct ltq_etop_chan *ch = container_of(napi,
 				struct ltq_etop_chan, napi);
@ -165,7 +161,7 @@ index bfdb0686..cdc0c0e 100644
 
 	while ((rx < budget) && !complete) {
 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
 	}
 	if (complete || !rx) {
 		napi_complete(&ch->napi);
@ -175,7 +171,7 @@ index bfdb0686..cdc0c0e 100644
 	}
 	return rx;
 }
-@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
 		container_of(napi, struct ltq_etop_chan, napi);
 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
 	struct netdev_queue *txq =
@ -191,7 +187,7 @@ index bfdb0686..cdc0c0e 100644
 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
 		ch->skb[ch->tx_free] = NULL;
 		memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
 	if (netif_tx_queue_stopped(txq))
 		netif_tx_start_queue(txq);
 	napi_complete(&ch->napi);
@ -215,7 +211,7 @@ index bfdb0686..cdc0c0e 100644
 	return IRQ_HANDLED;
 }
 
-@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device
 	ltq_dma_free(&ch->dma);
 	if (ch->dma.irq)
 		free_irq(ch->dma.irq, priv);
@ -280,17 +276,17 @@ index bfdb0686..cdc0c0e 100644
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 -	int i;
 +	int mii_mode = priv->mii_mode;
-+
-+	clk_enable(priv->clk_ppe);
 
 -	ltq_pmu_enable(PMU_PPE);
+	clk_enable(priv->clk_ppe);
+ 
+-	switch (priv->pldata->mii_mode) {
 +	if (of_machine_is_compatible("lantiq,ar9")) {
 +		ltq_etop_gbit_init(dev);
 +		/* force the etops link to the gbit to MII */
 +		mii_mode = PHY_INTERFACE_MODE_MII;
 +	}
- 
-	switch (priv->pldata->mii_mode) {
+
 +	switch (mii_mode) {
 	case PHY_INTERFACE_MODE_RMII:
 		ltq_etop_w32_mask(ETOP_MII_MASK,
@ -386,7 +382,7 @@ index bfdb0686..cdc0c0e 100644
 }
 
 static void
-@@ -312,7 +445,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+@@ -312,7 +445,10 @@ ltq_etop_get_settings(struct net_device
 {
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 
@ -398,7 +394,7 @@ index bfdb0686..cdc0c0e 100644
 }
 
 static int
-@@ -320,7 +456,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+@@ -320,7 +456,10 @@ ltq_etop_set_settings(struct net_device
 {
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 
@ -410,7 +406,7 @@ index bfdb0686..cdc0c0e 100644
 }
 
 static int
-@@ -328,7 +467,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+@@ -328,7 +467,10 @@ ltq_etop_nway_reset(struct net_device *d
 {
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 
@ -422,7 +418,7 @@ index bfdb0686..cdc0c0e 100644
 }
 
 static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -339,6 +481,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -339,6 +481,39 @@ static const struct ethtool_ops ltq_etop
 };
 
 static int
@ -462,18 +458,11 @@ index bfdb0686..cdc0c0e 100644
 ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
 {
 	u32 val = MDIO_REQUEST |
-@@ -379,14 +554,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+@@ -379,14 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
 {
 	struct ltq_etop_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
 -	int phy_addr;
-
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-		if (priv->mii_bus->phy_map[phy_addr]) {
-			phydev = priv->mii_bus->phy_map[phy_addr];
-			break;
-		}
-	}
 +	u32 phy_supported =  (SUPPORTED_10baseT_Half
 +			| SUPPORTED_10baseT_Full
 +			| SUPPORTED_100baseT_Half
@ -481,7 +470,13 @@ index bfdb0686..cdc0c0e 100644
 +			| SUPPORTED_Autoneg
 +			| SUPPORTED_MII
 +			| SUPPORTED_TP);
-+
+ 
+-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+-		if (priv->mii_bus->phy_map[phy_addr]) {
+-			phydev = priv->mii_bus->phy_map[phy_addr];
+-			break;
+-		}
+-	}
 +	if (of_machine_is_compatible("lantiq,ase"))
 +		phydev = priv->mii_bus->phy_map[8];
 +	else
@ -489,7 +484,7 @@ index bfdb0686..cdc0c0e 100644
 
 	if (!phydev) {
 		netdev_err(dev, "no PHY found\n");
-@@ -394,21 +573,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+@@ -394,21 +573,18 @@ ltq_etop_mdio_probe(struct net_device *d
 	}
 
 	phydev = phy_connect(dev, dev_name(&phydev->dev),
@ -516,7 +511,7 @@ index bfdb0686..cdc0c0e 100644
 	phydev->advertising = phydev->supported;
 	priv->phydev = phydev;
 	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-@@ -433,8 +609,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+@@ -433,8 +609,13 @@ ltq_etop_mdio_init(struct net_device *de
 	}
 
 	priv->mii_bus->priv = dev;
@ -572,6 +567,12 @@ index bfdb0686..cdc0c0e 100644
 -	phy_stop(priv->phydev);
 -	for (i = 0; i < MAX_DMA_CHAN; i++) {
 -		struct ltq_etop_chan *ch = &priv->ch[i];
+-
+-		if (!IS_RX(i) && !IS_TX(i))
+-			continue;
+-		napi_disable(&ch->napi);
+-		ltq_dma_close(&ch->dma);
+-	}
 +	if (priv->phydev)
 +		phy_stop(priv->phydev);
 +	napi_disable(&priv->txch.napi);
@ -581,16 +582,11 @@ index bfdb0686..cdc0c0e 100644
 +	ltq_dma_close(&priv->txch.dma);
 +	ltq_dma_close(&priv->rxch.dma);
 +	spin_unlock_irqrestore(&priv->lock, flags);
- 
-		if (!IS_RX(i) && !IS_TX(i))
-			continue;
-		napi_disable(&ch->napi);
-		ltq_dma_close(&ch->dma);
-	}
+
 	return 0;
 }
 
-@@ -523,16 +707,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+@@ -523,16 +707,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
 	int queue = skb_get_queue_mapping(skb);
 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
 	struct ltq_etop_priv *priv = netdev_priv(dev);
@ -612,7 +608,7 @@ index bfdb0686..cdc0c0e 100644
 		netdev_err(dev, "tx ring full\n");
 		netif_tx_stop_queue(txq);
 		return NETDEV_TX_BUSY;
-@@ -540,7 +724,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+@@ -540,7 +724,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
 
 	/* dma needs to start on a 16 byte aligned address */
 	byte_offset = CPHYSADDR(skb->data) % 16;
@ -621,7 +617,7 @@ index bfdb0686..cdc0c0e 100644
 
 	dev->trans_start = jiffies;
 
-@@ -550,11 +734,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+@@ -550,11 +734,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
 	wmb();
 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@ -682,7 +678,7 @@ index bfdb0686..cdc0c0e 100644
 	return 0;
 
 err_netdev:
-@@ -680,6 +863,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+@@ -680,6 +863,9 @@ ltq_etop_tx_timeout(struct net_device *d
 	err = ltq_etop_hw_init(dev);
 	if (err)
 		goto err_hw;
@ -692,7 +688,7 @@ index bfdb0686..cdc0c0e 100644
 	dev->trans_start = jiffies;
 	netif_wake_queue(dev);
 	return;
-@@ -703,14 +889,18 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+@@ -703,14 +889,18 @@ static const struct net_device_ops ltq_e
 	.ndo_tx_timeout = ltq_etop_tx_timeout,
 };
 
@ -715,7 +711,7 @@ index bfdb0686..cdc0c0e 100644
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
-@@ -736,30 +926,58 @@ ltq_etop_probe(struct platform_device *pdev)
+@@ -736,30 +926,58 @@ ltq_etop_probe(struct platform_device *p
 		goto err_out;
 	}
 
@ -789,7 +785,7 @@ index bfdb0686..cdc0c0e 100644
 
 	err = register_netdev(dev);
 	if (err)
-@@ -788,32 +1006,23 @@ ltq_etop_remove(struct platform_device *pdev)
+@@ -788,32 +1006,23 @@ ltq_etop_remove(struct platform_device *
 	return 0;
 }
 
@ -831,6 +827,3 @@ index bfdb0686..cdc0c0e 100644
 
 MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
 MODULE_DESCRIPTION("Lantiq SoC ETOP");
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0022-NET-multi-phy-support.patch
+++ b/target/linux/lantiq/patches-3.10/0022-NET-multi-phy-support.patch
@ -9,11 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 include/linux/phy.h   |    2 +-
 2 files changed, 7 insertions(+), 4 deletions(-)

-diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
-index 38f0b31..ad64a75 100644
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -773,7 +773,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -820,7 +820,8 @@ void phy_state_machine(struct work_struc
 			 * negotiation for now */
 			if (!phydev->link) {
 				phydev->state = PHY_NOLINK;
@ -23,7 +21,7 @@ index 38f0b31..ad64a75 100644
 				phydev->adjust_link(phydev->attached_dev);
 				break;
 			}
-@@ -843,7 +844,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -890,7 +891,8 @@ void phy_state_machine(struct work_struc
 				netif_carrier_on(phydev->attached_dev);
 			} else {
 				phydev->state = PHY_NOLINK;
@ -33,7 +31,7 @@ index 38f0b31..ad64a75 100644
 			}
 
 			phydev->adjust_link(phydev->attached_dev);
-@@ -855,7 +857,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -902,7 +904,8 @@ void phy_state_machine(struct work_struc
 		case PHY_HALTED:
 			if (phydev->link) {
 				phydev->link = 0;
@ -43,8 +41,6 @@ index 38f0b31..ad64a75 100644
 				phydev->adjust_link(phydev->attached_dev);
 			}
 			break;
-diff --git a/include/linux/phy.h b/include/linux/phy.h
-index 9e11039..9a8ca78 100644
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
@@ -298,7 +298,7 @@ struct phy_device {
@ -56,6 +52,3 @@ index 9e11039..9a8ca78 100644
 	enum phy_state state;
 
 	u32 dev_flags;
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0023-NET-add-of_get_mac_address_mtd.patch
+++ b/target/linux/lantiq/patches-3.10/0023-NET-add-of_get_mac_address_mtd.patch
@ -14,8 +14,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 include/linux/of_net.h |    1 +
 2 files changed, 38 insertions(+)

-diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
-index ffab033..15f4a71 100644
 --- a/drivers/of/of_net.c
 +++ b/drivers/of/of_net.c
@@ -10,6 +10,7 @@
@ -26,7 +24,7 @@ index ffab033..15f4a71 100644
 
 /**
  * It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
 	return NULL;
 }
 EXPORT_SYMBOL(of_get_mac_address);
@ -66,8 +64,6 @@ index ffab033..15f4a71 100644
 +	return ret;
 +}
 +EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-diff --git a/include/linux/of_net.h b/include/linux/of_net.h
-index 61bf53b..6e6b4a9 100644
 --- a/include/linux/of_net.h
 +++ b/include/linux/of_net.h
@@ -11,6 +11,7 @@
@ -78,6 +74,3 @@ index 61bf53b..6e6b4a9 100644
 #else
 static inline const int of_get_phy_mode(struct device_node *np)
 {
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0024-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.10/0024-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
@ -17,8 +17,6 @@ Cc: linux-gpio@vger.kernel.org
 3 files changed, 354 insertions(+)
 create mode 100644 drivers/gpio/gpio-falcon.c

-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 573c449..59b8764 100644
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
@@ -135,6 +135,11 @@ config GPIO_EP93XX
@ -33,11 +31,9 @@ index 573c449..59b8764 100644
 config GPIO_MM_LANTIQ
 	bool "Lantiq Memory mapped GPIOs"
 	depends on LANTIQ && SOC_XWAY
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 0cb2d65..542960d 100644
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
+@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055
 obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
@ -45,9 +41,6 @@ index 0cb2d65..542960d 100644
 obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
 obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
 obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
-diff --git a/drivers/gpio/gpio-falcon.c b/drivers/gpio/gpio-falcon.c
-new file mode 100644
-index 0000000..ae3bdfb
 --- /dev/null
 +++ b/drivers/gpio/gpio-falcon.c
@@ -0,0 +1,348 @@
@ -399,6 +392,3 @@ index 0000000..ae3bdfb
 +}
 +
 +subsys_initcall(falcon_gpio_init);
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0025-GPIO-add-gpio_export_with_name.patch
+++ b/target/linux/lantiq/patches-3.10/0025-GPIO-add-gpio_export_with_name.patch
@ -14,8 +14,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 include/linux/gpio.h                            |   26 ++++++++-
 5 files changed, 172 insertions(+), 12 deletions(-)

-diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
-index d933af3..c264748 100644
 --- a/Documentation/devicetree/bindings/gpio/gpio.txt
 +++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -112,3 +112,63 @@ where,
@ -82,8 +80,6 @@ index d933af3..c264748 100644
 +		gpio-export,output = <1>;
 +	};
 +};
-diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
-index 665f953..15ec5e5 100644
 --- a/drivers/gpio/gpiolib-of.c
 +++ b/drivers/gpio/gpiolib-of.c
@@ -21,6 +21,8 @@
@ -95,7 +91,7 @@ index 665f953..15ec5e5 100644
 
 /* Private data structure for of_gpiochip_find_and_xlate */
 struct gg_data {
-@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip
 	if (chip->of_node)
 		of_node_put(chip->of_node);
 }
@ -165,11 +161,9 @@ index 665f953..15ec5e5 100644
 +	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
 +}
 +device_initcall(of_gpio_export_init);
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-index c2534d6..8697c82 100644
 --- a/drivers/gpio/gpiolib.c
 +++ b/drivers/gpio/gpiolib.c
-@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct gpio_desc *desc);
+@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct
 static void gpiod_set_value(struct gpio_desc *desc, int value);
 static int gpiod_cansleep(const struct gpio_desc *desc);
 static int gpiod_to_irq(const struct gpio_desc *desc);
@ -178,7 +172,7 @@ index c2534d6..8697c82 100644
 static int gpiod_export_link(struct device *dev, const char *name,
 			     struct gpio_desc *desc);
 static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-@@ -674,7 +674,7 @@ static ssize_t export_store(struct class *class,
+@@ -674,7 +674,7 @@ static ssize_t export_store(struct class
 			status = -ENODEV;
 		goto done;
 	}
@ -208,7 +202,7 @@ index c2534d6..8697c82 100644
 {
 	unsigned long		flags;
 	int			status;
-@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc
 		goto fail_unlock;
 	}
 
@ -232,7 +226,7 @@ index c2534d6..8697c82 100644
 
 static int match_export(struct device *dev, const void *data)
 {
-@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(struct gpio_chip *chip)
+@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(str
 }
 
 static inline int gpiod_export(struct gpio_desc *desc,
@ -241,7 +235,7 @@ index c2534d6..8697c82 100644
 {
 	return -ENOSYS;
 }
-@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsi
 	if (flags & GPIOF_OPEN_SOURCE)
 		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 
@ -251,7 +245,7 @@ index c2534d6..8697c82 100644
 	if (flags & GPIOF_DIR_IN)
 		err = gpiod_direction_input(desc);
 	else
-@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsi
 		goto free_gpio;
 
 	if (flags & GPIOF_EXPORT) {
@ -260,11 +254,9 @@ index c2534d6..8697c82 100644
 		if (err)
 			goto free_gpio;
 	}
-diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
-index bde6469..3290572 100644
 --- a/include/asm-generic/gpio.h
 +++ b/include/asm-generic/gpio.h
-@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
+@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct
  * A sysfs interface can be exported by individual drivers if they want,
  * but more typically is configured entirely from userspace.
  */
@ -284,8 +276,6 @@ index bde6469..3290572 100644
 {
 	return -ENOSYS;
 }
-diff --git a/include/linux/gpio.h b/include/linux/gpio.h
-index 552e3f4..07bbbcc7 100644
 --- a/include/linux/gpio.h
 +++ b/include/linux/gpio.h
@@ -27,6 +27,9 @@
@ -298,7 +288,7 @@ index 552e3f4..07bbbcc7 100644
 /**
  * struct gpio - a structure describing a GPIO with configuration
  * @gpio:	the GPIO number
-@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansle
 	WARN_ON(1);
 }
 
@ -308,7 +298,7 @@ index 552e3f4..07bbbcc7 100644
 {
 	/* GPIO can never have been requested or set as {in,out}put */
 	WARN_ON(1);
-@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
+@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device
 			  unsigned long flags, const char *label);
 void devm_gpio_free(struct device *dev, unsigned int gpio);
 
@ -333,6 +323,3 @@ index 552e3f4..07bbbcc7 100644
 +}
 +
 #endif /* __LINUX_GPIO_H */
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0026-pinctrl-lantiq-fix-up-pinmux.patch
+++ b/target/linux/lantiq/patches-3.10/0026-pinctrl-lantiq-fix-up-pinmux.patch
@ -10,11 +10,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

-diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
-index e92132c..e40b2e6 100644
 --- a/drivers/pinctrl/pinctrl-xway.c
 +++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -564,10 +564,9 @@ static struct pinctrl_desc xway_pctrl_desc = {
+@@ -564,10 +564,9 @@ static struct pinctrl_desc xway_pctrl_de
 	.confops	= &xway_pinconf_ops,
 };
 
@ -26,7 +24,7 @@ index e92132c..e40b2e6 100644
 	int port = PORT(pin);
 	u32 alt1_reg = GPIO_ALT1(pin);
 
-@@ -587,6 +586,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
+@@ -587,6 +586,14 @@ static inline int xway_mux_apply(struct
 	return 0;
 }
 
@ -41,7 +39,7 @@ index e92132c..e40b2e6 100644
 static const struct ltq_cfg_param xway_cfg_params[] = {
 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -631,6 +638,10 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
+@@ -631,6 +638,10 @@ static int xway_gpio_dir_out(struct gpio
 {
 	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
 
@ -52,7 +50,7 @@ index e92132c..e40b2e6 100644
 	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
 	xway_gpio_set(chip, pin, val);
 
-@@ -651,6 +662,18 @@ static void xway_gpio_free(struct gpio_chip *chip, unsigned offset)
+@@ -651,6 +662,18 @@ static void xway_gpio_free(struct gpio_c
 	pinctrl_free_gpio(gpio);
 }
 
@ -79,6 +77,3 @@ index e92132c..e40b2e6 100644
 	.base = -1,
 };
 
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0027-pinctrl-lantiq-add-missing-gphy-led-setup.patch
+++ b/target/linux/lantiq/patches-3.10/0027-pinctrl-lantiq-add-missing-gphy-led-setup.patch
@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/pinctrl/pinctrl-xway.c |   30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

-diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
-index e40b2e6..b159fd5 100644
 --- a/drivers/pinctrl/pinctrl-xway.c
 +++ b/drivers/pinctrl/pinctrl-xway.c
@@ -102,6 +102,7 @@ enum xway_mux {
@ -22,7 +20,7 @@ index e40b2e6..b159fd5 100644
 	XWAY_MUX_NONE = 0xffff,
 };
 
-@@ -109,12 +110,12 @@ static const struct ltq_mfp_pin xway_mfp[] = {
+@@ -109,12 +110,12 @@ static const struct ltq_mfp_pin xway_mfp
 	/*       pin    f0	f1	f2	f3   */
 	MFP_XWAY(GPIO0, GPIO,	EXIN,	NONE,	TDM),
 	MFP_XWAY(GPIO1, GPIO,	EXIN,	NONE,	NONE),
@ -38,7 +36,7 @@ index e40b2e6..b159fd5 100644
 	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
 	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	EXIN),
 	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	NONE),
-@@ -151,10 +152,10 @@ static const struct ltq_mfp_pin xway_mfp[] = {
+@@ -151,10 +152,10 @@ static const struct ltq_mfp_pin xway_mfp
 	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
 	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
 	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
@ -52,7 +50,7 @@ index e40b2e6..b159fd5 100644
 	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
 	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
 	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
-@@ -208,6 +209,13 @@ static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6};
+@@ -208,6 +209,13 @@ static const unsigned pins_stp[] = {GPIO
 static const unsigned pins_nmi[] = {GPIO8};
 static const unsigned pins_mdio[] = {GPIO42, GPIO43};
 
@ -66,7 +64,7 @@ index e40b2e6..b159fd5 100644
 static const unsigned pins_ebu_a24[] = {GPIO13};
 static const unsigned pins_ebu_clk[] = {GPIO21};
 static const unsigned pins_ebu_cs1[] = {GPIO23};
-@@ -322,6 +330,12 @@ static const struct ltq_pin_group xway_grps[] = {
+@@ -322,6 +330,12 @@ static const struct ltq_pin_group xway_g
 	GRP_MUX("gnt4", PCI, pins_pci_gnt4),
 	GRP_MUX("req4", PCI, pins_pci_gnt4),
 	GRP_MUX("mdio", MDIO, pins_mdio),
@ -79,7 +77,7 @@ index e40b2e6..b159fd5 100644
 };
 
 static const struct ltq_pin_group ase_grps[] = {
-@@ -365,6 +379,9 @@ static const char * const xway_nmi_grps[] = {"nmi"};
+@@ -365,6 +379,9 @@ static const char * const xway_nmi_grps[
 
 /* ar9/vr9/gr9 */
 static const char * const xrx_mdio_grps[] = {"mdio"};
@ -89,7 +87,7 @@ index e40b2e6..b159fd5 100644
 static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24",
 						"ebu a25", "ebu cs1",
 						"ebu wait", "ebu clk",
-@@ -414,6 +431,7 @@ static const struct ltq_pmx_func xrx_funcs[] = {
+@@ -414,6 +431,7 @@ static const struct ltq_pmx_func xrx_fun
 	{"pci",		ARRAY_AND_SIZE(xrx_pci_grps)},
 	{"ebu",		ARRAY_AND_SIZE(xrx_ebu_grps)},
 	{"mdio",	ARRAY_AND_SIZE(xrx_mdio_grps)},
@ -97,6 +95,3 @@ index e40b2e6..b159fd5 100644
 };
 
 static const struct ltq_pmx_func ase_funcs[] = {
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0028-pinctrl-lantiq-add-missing-pin-definition-to-falcon-.patch
+++ b/target/linux/lantiq/patches-3.10/0028-pinctrl-lantiq-add-missing-pin-definition-to-falcon-.patch
@ -12,8 +12,6 @@ Acked-by: John Crispin <blogic@openwrt.org>
 drivers/pinctrl/pinctrl-falcon.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

-diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
-index f9b2a1d..4e731f2 100644
 --- a/drivers/pinctrl/pinctrl-falcon.c
 +++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -75,6 +75,7 @@ enum falcon_mux {
@ -24,7 +22,7 @@ index f9b2a1d..4e731f2 100644
 	FALCON_MUX_MDIO,
 	FALCON_MUX_LED,
 	FALCON_MUX_SPI,
-@@ -114,7 +115,7 @@ static struct ltq_mfp_pin falcon_mfp[] = {
+@@ -114,7 +115,7 @@ static struct ltq_mfp_pin falcon_mfp[] =
 	MFP_FALCON(GPIO2,	GPIO,	GPIO,   NONE,   NONE),
 	MFP_FALCON(GPIO3,	GPIO,	GPIO,   NONE,   NONE),
 	MFP_FALCON(GPIO4,	NTR,	GPIO,   NONE,   NONE),
@ -33,7 +31,7 @@ index f9b2a1d..4e731f2 100644
 	MFP_FALCON(GPIO6,	RST,	GPIO,   NONE,   NONE),
 	MFP_FALCON(GPIO7,	MDIO,	GPIO,   NONE,   NONE),
 	MFP_FALCON(GPIO8,	MDIO,	GPIO,   NONE,   NONE),
-@@ -168,6 +169,7 @@ static struct ltq_mfp_pin falcon_mfp[] = {
+@@ -168,6 +169,7 @@ static struct ltq_mfp_pin falcon_mfp[] =
 static const unsigned pins_por[] = {GPIO0};
 static const unsigned pins_ntr[] = {GPIO4};
 static const unsigned pins_ntr8k[] = {GPIO5};
@ -41,7 +39,7 @@ index f9b2a1d..4e731f2 100644
 static const unsigned pins_hrst[] = {GPIO6};
 static const unsigned pins_mdio[] = {GPIO7, GPIO8};
 static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
-@@ -186,6 +188,7 @@ static struct ltq_pin_group falcon_grps[] = {
+@@ -186,6 +188,7 @@ static struct ltq_pin_group falcon_grps[
 	GRP_MUX("por", RST, pins_por),
 	GRP_MUX("ntr", NTR, pins_ntr),
 	GRP_MUX("ntr8k", NTR, pins_ntr8k),
@ -49,7 +47,7 @@ index f9b2a1d..4e731f2 100644
 	GRP_MUX("hrst", RST, pins_hrst),
 	GRP_MUX("mdio", MDIO, pins_mdio),
 	GRP_MUX("bootled", LED, pins_bled),
-@@ -201,7 +204,7 @@ static struct ltq_pin_group falcon_grps[] = {
+@@ -201,7 +204,7 @@ static struct ltq_pin_group falcon_grps[
 };
 
 static const char * const ltq_rst_grps[] = {"por", "hrst"};
@ -58,6 +56,3 @@ index f9b2a1d..4e731f2 100644
 static const char * const ltq_mdio_grps[] = {"mdio"};
 static const char * const ltq_bled_grps[] = {"bootled"};
 static const char * const ltq_asc_grps[] = {"asc0", "asc1"};
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0029-serial-MIPS-lantiq-add-clk_enable-call-to-driver.patch
+++ b/target/linux/lantiq/patches-3.10/0029-serial-MIPS-lantiq-add-clk_enable-call-to-driver.patch
@ -11,11 +11,9 @@ Acked-by: John Crispin <blogic@openwrt.org>
 drivers/tty/serial/lantiq.c |    3 +++
 1 file changed, 3 insertions(+)

-diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
-index 15733da..93ac046 100644
 --- a/drivers/tty/serial/lantiq.c
 +++ b/drivers/tty/serial/lantiq.c
-@@ -636,6 +636,9 @@ lqasc_console_setup(struct console *co, char *options)
+@@ -636,6 +636,9 @@ lqasc_console_setup(struct console *co,
 
 	port = &ltq_port->port;
 
@ -25,6 +23,3 @@ index 15733da..93ac046 100644
 	port->uartclk = clk_get_rate(ltq_port->fpiclk);
 
 	if (options)
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0030-serial-MIPS-lantiq-fix-clock-error-check.patch
+++ b/target/linux/lantiq/patches-3.10/0030-serial-MIPS-lantiq-fix-clock-error-check.patch
@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/tty/serial/lantiq.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
-index 93ac046..88d01e0 100644
 --- a/drivers/tty/serial/lantiq.c
 +++ b/drivers/tty/serial/lantiq.c
@@ -318,7 +318,7 @@ lqasc_startup(struct uart_port *port)
@ -32,6 +30,3 @@ index 93ac046..88d01e0 100644
 		clk_disable(ltq_port->clk);
 }
 
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-3.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@ -16,11 +16,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 create mode 100644 drivers/i2c/busses/i2c-lantiq.c
 create mode 100644 drivers/i2c/busses/i2c-lantiq.h

-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 631736e..0f0522b 100644
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
-@@ -494,6 +494,16 @@ config I2C_IOP3XX
+@@ -495,6 +495,16 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
@ -37,11 +35,9 @@ index 631736e..0f0522b 100644
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 8f4fc23..3273061 100644
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
+@@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
@ -49,9 +45,6 @@ index 8f4fc23..3273061 100644
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
-diff --git a/drivers/i2c/busses/i2c-lantiq.c b/drivers/i2c/busses/i2c-lantiq.c
-new file mode 100644
-index 0000000..9a5f58b
 --- /dev/null
 +++ b/drivers/i2c/busses/i2c-lantiq.c
@@ -0,0 +1,747 @@
@ -802,9 +795,6 @@ index 0000000..9a5f58b
 +MODULE_ALIAS("platform:" DRV_NAME);
 +MODULE_LICENSE("GPL");
 +MODULE_VERSION(DRV_VERSION);
-diff --git a/drivers/i2c/busses/i2c-lantiq.h b/drivers/i2c/busses/i2c-lantiq.h
-new file mode 100644
-index 0000000..7a86b89
 --- /dev/null
 +++ b/drivers/i2c/busses/i2c-lantiq.h
@@ -0,0 +1,234 @@
@ -1042,6 +1032,3 @@ index 0000000..7a86b89
 +
 +
 +#endif /* I2C_LANTIQ_H */
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0032-USB-fix-roothub-for-IFXHCD.patch
+++ b/target/linux/lantiq/patches-3.10/0032-USB-fix-roothub-for-IFXHCD.patch
@ -8,8 +8,6 @@ Subject: [PATCH 32/34] USB: fix roothub for IFXHCD
 drivers/usb/core/hub.c   |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

-diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
-index 1621b1d..4c9a241 100644
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
@@ -3,6 +3,7 @@ if LANTIQ
@ -20,11 +18,9 @@ index 1621b1d..4c9a241 100644
 	default n
 
 choice
-diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index feef935..db4fb8e 100644
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -4009,7 +4009,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+@@ -4041,7 +4041,7 @@ hub_port_init (struct usb_hub *hub, stru
 		udev->ttport = hdev->ttport;
 	} else if (udev->speed != USB_SPEED_HIGH
 			&& hdev->speed == USB_SPEED_HIGH) {
@ -33,6 +29,3 @@ index feef935..db4fb8e 100644
 			dev_err(&udev->dev, "parent hub has no TT\n");
 			retval = -EINVAL;
 			goto fail;
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-3.10/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@ -16,11 +16,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 3 files changed, 986 insertions(+)
 create mode 100644 drivers/spi/spi-xway.c

-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 92a9345..954c19f 100644
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -487,6 +487,14 @@ config SPI_NUC900
+@@ -496,6 +496,14 @@ config SPI_NUC900
 	help
 	  SPI driver for Nuvoton NUC900 series ARM SoCs
 
@ -35,18 +33,13 @@ index 92a9345..954c19f 100644
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 33f9c09..0574edf 100644
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -74,3 +74,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
+@@ -75,3 +75,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-t
 obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
 obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 +obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
-diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
-new file mode 100644
-index 0000000..61532e3
 --- /dev/null
 +++ b/drivers/spi/spi-xway.c
@@ -0,0 +1,977 @@
@ -1027,6 +1020,3 @@ index 0000000..61532e3
 +MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
 +MODULE_LICENSE("GPL");
 +MODULE_ALIAS("platform:spi-xway");
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
+++ b/target/linux/lantiq/patches-3.10/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
@ -17,8 +17,6 @@ Cc: Gabor Juhos <juhosg@openwrt.org>
 include/linux/reset.h            |   43 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

-diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
-index 2f61311..068f073 100644
 --- a/include/linux/reset-controller.h
 +++ b/include/linux/reset-controller.h
@@ -45,7 +45,23 @@ struct reset_controller_dev {
@ -45,8 +43,6 @@ index 2f61311..068f073 100644
 +#endif
 +
 #endif
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index 6082247..1b36c9e 100644
 --- a/include/linux/reset.h
 +++ b/include/linux/reset.h
@@ -1,9 +1,13 @@
@ -63,7 +59,7 @@ index 6082247..1b36c9e 100644
 int reset_control_reset(struct reset_control *rstc);
 int reset_control_assert(struct reset_control *rstc);
 int reset_control_deassert(struct reset_control *rstc);
-@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
+@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control
 
 int device_reset(struct device *dev);
 
@ -107,6 +103,3 @@ index 6082247..1b36c9e 100644
 +#endif
 +
 #endif
-- 
-1.7.10.4
-
--- a/target/linux/lantiq/patches-3.10/0101-timer-backport.patch
+++ b/target/linux/lantiq/patches-3.10/0101-timer-backport.patch
@ -12,9 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
 create mode 100644 arch/mips/lantiq/xway/timer.c

-diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-new file mode 100644
-index 0000000..ef564ab
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
@@ -0,0 +1,155 @@
@ -173,19 +170,14 @@ index 0000000..ef564ab
 +	u32 reload, unsigned long arg1, unsigned long arg2);
 +
 +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
-diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
-index a2edc53..da51fe0 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
@@ -1,4 +1,4 @@
 -obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
 +obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
 
- obj-y += vmmc.o
+ obj-y += vmmc.o mtd_split.o
 
-diff --git a/arch/mips/lantiq/xway/timer.c b/arch/mips/lantiq/xway/timer.c
-new file mode 100644
-index 0000000..1c0fdb8
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/timer.c
@@ -0,0 +1,845 @@
@ -1034,6 +1026,3 @@ index 0000000..1c0fdb8
 +module_exit(lq_gptu_exit);
 +
 +#endif
-- 
-1.7.10.4
-
--- a/target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch
+++ b/target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch
@ -17,7 +17,7 @@ Cc: linux-mips@linux-mips.org

 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -1104,6 +1104,13 @@ config LANTIQ_WDT
+@@ -1113,6 +1113,13 @@ config LANTIQ_WDT
 	help
 	  Hardware driver for the Lantiq SoC Watchdog Timer.
 
@ -33,7 +33,7 @@ Cc: linux-mips@linux-mips.org
 # POWERPC Architecture
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -134,6 +134,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+@@ -135,6 +135,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
 octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
--- a/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@ -19,11 +19,9 @@ Cc: linux-gpio@vger.kernel.org
 create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
 create mode 100644 drivers/gpio/gpio-ralink.c

-Index: linux-3.10.9/arch/mips/Kconfig
-===================================================================
--- linux-3.10.9.orig/arch/mips/Kconfig	2013-08-26 17:48:27.481164281 +0200
-+++ linux-3.10.9/arch/mips/Kconfig	2013-08-27 23:15:40.751965869 +0200
-@@ -444,6 +444,7 @@
+--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
+@@ -444,6 +444,7 @@ config RALINK
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
@ -31,10 +29,8 @@ Index: linux-3.10.9/arch/mips/Kconfig
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
-Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/gpio.h
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.9/arch/mips/include/asm/mach-ralink/gpio.h	2013-08-26 17:48:30.941164428 +0200
+--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
 +/*
 + *  Ralink SoC GPIO API support
@ -60,11 +56,9 @@ Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/gpio.h
 +#define gpio_to_irq	__gpio_to_irq
 +
 +#endif /* __ASM_MACH_RALINK_GPIO_H */
-Index: linux-3.10.9/drivers/gpio/Kconfig
-===================================================================
--- linux-3.10.9.orig/drivers/gpio/Kconfig	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/drivers/gpio/Kconfig	2013-08-26 17:48:30.941164428 +0200
-@@ -209,6 +209,12 @@
+--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
+@@ -209,6 +209,12 @@ config GPIO_RCAR
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
 
@ -77,11 +71,9 @@ Index: linux-3.10.9/drivers/gpio/Kconfig
 config GPIO_SPEAR_SPICS
 	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
 	depends on PLAT_SPEAR
-Index: linux-3.10.9/drivers/gpio/Makefile
-===================================================================
--- linux-3.10.9.orig/drivers/gpio/Makefile	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/drivers/gpio/Makefile	2013-08-26 17:48:30.941164428 +0200
-@@ -56,6 +56,7 @@
+--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf85
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
@ -89,10 +81,8 @@ Index: linux-3.10.9/drivers/gpio/Makefile
 obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 obj-$(CONFIG_GPIO_RCAR)		+= gpio-rcar.o
-Index: linux-3.10.9/drivers/gpio/gpio-ralink.c
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.9/drivers/gpio/gpio-ralink.c	2013-08-27 22:37:34.999868257 +0200
+--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,345 @@
 +/*
 + * This program is free software; you can redistribute it and/or modify it
--- a/target/linux/ramips/patches-3.10/0122-pinmux.patch
+++ b/target/linux/ramips/patches-3.10/0122-pinmux.patch
@ -14,11 +14,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 6 files changed, 385 insertions(+), 19 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-rt2880.c

-Index: linux-3.10.9/arch/mips/Kconfig
-===================================================================
--- linux-3.10.9.orig/arch/mips/Kconfig	2013-08-28 16:34:42.449951676 +0200
-+++ linux-3.10.9/arch/mips/Kconfig	2013-08-28 16:34:43.361951711 +0200
-@@ -446,6 +446,8 @@
+--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
+@@ -446,6 +446,8 @@ config RALINK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
@ -27,11 +25,9 @@ Index: linux-3.10.9/arch/mips/Kconfig
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
-Index: linux-3.10.9/drivers/pinctrl/Kconfig
-===================================================================
--- linux-3.10.9.orig/drivers/pinctrl/Kconfig	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/drivers/pinctrl/Kconfig	2013-08-28 16:34:43.361951711 +0200
-@@ -114,6 +114,11 @@
+--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
+@@ -114,6 +114,11 @@ config PINCTRL_LANTIQ
 	select PINMUX
 	select PINCONF
 
@ -43,11 +39,9 @@ Index: linux-3.10.9/drivers/pinctrl/Kconfig
 config PINCTRL_FALCON
 	bool
 	depends on SOC_FALCON
-Index: linux-3.10.9/drivers/pinctrl/Makefile
-===================================================================
--- linux-3.10.9.orig/drivers/pinctrl/Makefile	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/drivers/pinctrl/Makefile	2013-08-28 16:34:43.361951711 +0200
-@@ -45,6 +45,7 @@
+--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinc
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
@ -55,10 +49,8 @@ Index: linux-3.10.9/drivers/pinctrl/Makefile
 
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/
-Index: linux-3.10.9/drivers/pinctrl/pinctrl-rt2880.c
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.9/drivers/pinctrl/pinctrl-rt2880.c	2013-08-28 16:34:43.361951711 +0200
+--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rt2880.c
@@ -0,0 +1,456 @@
 +/*
 + *  linux/drivers/pinctrl/pinctrl-rt2880.c
@ -516,10 +508,8 @@ Index: linux-3.10.9/drivers/pinctrl/pinctrl-rt2880.c
 +}
 +
 +core_initcall_sync(rt2880_pinmux_init);
-Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/pinmux.h
-===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.9/arch/mips/include/asm/mach-ralink/pinmux.h	2013-08-28 16:34:43.361951711 +0200
+--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
@@ -0,0 +1,47 @@
 +/*
 + *  This program is free software; you can redistribute it and/or modify
@ -568,10 +558,8 @@ Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/pinmux.h
 +extern struct rt2880_pmx_group *rt2880_pinmux_data;
 +
 +#endif
-Index: linux-3.10.9/arch/mips/ralink/mt7620.c
-===================================================================
--- linux-3.10.9.orig/arch/mips/ralink/mt7620.c	2013-08-28 16:34:42.829951688 +0200
-+++ linux-3.10.9/arch/mips/ralink/mt7620.c	2013-08-28 16:34:43.361951711 +0200
+--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -17,6 +17,7 @@
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@ -580,7 +568,7 @@ Index: linux-3.10.9/arch/mips/ralink/mt7620.c
 
 #include "common.h"
 
-@@ -48,118 +49,40 @@
+@@ -48,118 +49,40 @@ static int dram_type;
 /* the pll dividers */
 static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
 
@ -732,17 +720,15 @@ Index: linux-3.10.9/arch/mips/ralink/mt7620.c
 };
 
 void __init ralink_clk_init(void)
-@@ -281,4 +204,6 @@
+@@ -281,4 +204,6 @@ void prom_soc_init(struct ralink_soc_inf
 		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 +
 +	rt2880_pinmux_data = mt7620a_pinmux_data;
 }
-Index: linux-3.10.9/arch/mips/ralink/rt305x.c
-===================================================================
--- linux-3.10.9.orig/arch/mips/ralink/rt305x.c	2013-08-28 16:34:43.061951698 +0200
-+++ linux-3.10.9/arch/mips/ralink/rt305x.c	2013-08-28 16:34:43.365951713 +0200
+--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -17,90 +17,71 @@
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@ -892,7 +878,7 @@ Index: linux-3.10.9/arch/mips/ralink/rt305x.c
 };
 
 static void rt305x_wdt_reset(void)
-@@ -114,14 +95,6 @@
+@@ -114,14 +95,6 @@ static void rt305x_wdt_reset(void)
 	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
 }
 
@ -907,7 +893,7 @@ Index: linux-3.10.9/arch/mips/ralink/rt305x.c
 static unsigned long rt5350_get_mem_size(void)
 {
 	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -291,11 +264,14 @@
+@@ -291,11 +264,14 @@ void prom_soc_init(struct ralink_soc_inf
 	soc_info->mem_base = RT305X_SDRAM_BASE;
 	if (soc_is_rt5350()) {
 		soc_info->mem_size = rt5350_get_mem_size();
@ -922,11 +908,9 @@ Index: linux-3.10.9/arch/mips/ralink/rt305x.c
 +		rt2880_pinmux_data = rt3352_pinmux_data;
 	}
 }
-Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt305x.h
-===================================================================
--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/rt305x.h	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/arch/mips/include/asm/mach-ralink/rt305x.h	2013-08-28 16:34:43.365951713 +0200
-@@ -125,24 +125,28 @@
+--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
+@@ -125,24 +125,28 @@ static inline int soc_is_rt5350(void)
 #define RT305X_GPIO_GE0_TXD0		40
 #define RT305X_GPIO_GE0_RXCLK		51
 
@ -970,10 +954,8 @@ Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt305x.h
 
 #define RT3352_SYSC_REG_SYSCFG0		0x010
 #define RT3352_SYSC_REG_SYSCFG1         0x014
-Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/mt7620.h
-===================================================================
--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/mt7620.h	2013-08-28 16:34:42.625951682 +0200
-+++ linux-3.10.9/arch/mips/include/asm/mach-ralink/mt7620.h	2013-08-28 18:32:38.370254386 +0200
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -59,7 +59,6 @@
 #define MT7620_DDR2_SIZE_MIN		32
 #define MT7620_DDR2_SIZE_MAX		256
@ -1010,10 +992,8 @@ Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/mt7620.h
 +#define MT7620_GPIO_MODE_WDT		22
 
 #endif
-Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt3883.h
-===================================================================
--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/rt3883.h	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/arch/mips/include/asm/mach-ralink/rt3883.h	2013-08-28 18:33:57.554258201 +0200
+--- a/arch/mips/include/asm/mach-ralink/rt3883.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -112,8 +112,6 @@
 #define RT3883_CLKCFG1_PCI_CLK_EN	BIT(19)
 #define RT3883_CLKCFG1_UPHY0_CLK_EN	BIT(18)
@ -1044,10 +1024,8 @@ Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt3883.h
 #define RT3883_GPIO_MODE_PCI_SHIFT	11
 #define RT3883_GPIO_MODE_PCI_MASK	0x7
 #define RT3883_GPIO_MODE_PCI		(RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
-Index: linux-3.10.9/arch/mips/ralink/common.h
-===================================================================
--- linux-3.10.9.orig/arch/mips/ralink/common.h	2013-08-28 16:34:42.453951675 +0200
-+++ linux-3.10.9/arch/mips/ralink/common.h	2013-08-28 18:10:55.014197854 +0200
+--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -11,25 +11,6 @@
 
 #define RAMIPS_SYS_TYPE_LEN	32
@ -1074,10 +1052,8 @@ Index: linux-3.10.9/arch/mips/ralink/common.h
 struct ralink_soc_info {
 	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
 	unsigned char *compatible;
-Index: linux-3.10.9/arch/mips/ralink/rt3883.c
-===================================================================
--- linux-3.10.9.orig/arch/mips/ralink/rt3883.c	2013-08-21 00:40:47.000000000 +0200
-+++ linux-3.10.9/arch/mips/ralink/rt3883.c	2013-08-28 18:47:07.442290690 +0200
+--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -17,132 +17,50 @@
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@ -1249,7 +1225,7 @@ Index: linux-3.10.9/arch/mips/ralink/rt3883.c
 };
 
 static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@
+@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
 	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
 }
 
@ -1267,7 +1243,7 @@ Index: linux-3.10.9/arch/mips/ralink/rt3883.c
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate;
-@@ -243,4 +150,6 @@
+@@ -243,4 +150,6 @@ void prom_soc_init(struct ralink_soc_inf
 	soc_info->mem_base = RT3883_SDRAM_BASE;
 	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
--- a/target/linux/ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch
+++ b/target/linux/ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch
@ -49,9 +49,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>

 --- a/drivers/usb/Kconfig
 +++ b/drivers/usb/Kconfig
-@@ -126,6 +126,8 @@ source "drivers/usb/core/Kconfig"
+@@ -126,6 +126,8 @@ if USB
 
- source "drivers/usb/dwc3/Kconfig"
+ source "drivers/usb/core/Kconfig"
 
 +source "drivers/usb/dwc_otg/Kconfig"
 +
@ -60,8 +60,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 source "drivers/usb/wusbcore/Kconfig"
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB)		+= core/
- obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
+@@ -7,6 +7,7 @@
+ obj-$(CONFIG_USB)		+= core/
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 +obj-$(CONFIG_DWC_OTG)		+= dwc_otg/
--- a/target/linux/ramips/patches-3.10/0204-owrt-mtd-split-remove-padding.patch
+++ b/target/linux/ramips/patches-3.10/0204-owrt-mtd-split-remove-padding.patch
@ -1,6 +1,6 @@
 --- a/drivers/mtd/mtdpart.c
 +++ b/drivers/mtd/mtdpart.c
-@@ -808,10 +808,6 @@ static void split_uimage(struct mtd_info
+@@ -806,10 +806,6 @@ static void split_uimage(struct mtd_info
 		return;
 
 	len = be32_to_cpu(hdr.size) + 0x40;
--- a/target/linux/ramips/patches-3.10/0205-uvc-add-iPassion-iP2970-support.patch
+++ b/target/linux/ramips/patches-3.10/0205-uvc-add-iPassion-iP2970-support.patch
@ -12,11 +12,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 drivers/media/usb/uvc/uvcvideo.h   |    3 +++
 5 files changed, 61 insertions(+), 7 deletions(-)

-Index: linux-3.10.12/drivers/media/usb/uvc/uvc_driver.c
-===================================================================
--- linux-3.10.12.orig/drivers/media/usb/uvc/uvc_driver.c	2013-09-14 15:55:12.000000000 +0200
-+++ linux-3.10.12/drivers/media/usb/uvc/uvc_driver.c	2013-09-19 04:30:11.825592123 +0200
-@@ -2420,6 +2420,20 @@
+--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
+@@ -2420,6 +2420,20 @@ static struct usb_device_id uvc_ids[] =
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
@ -37,11 +35,9 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_driver.c
 	/* Generic USB Video Class */
 	{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
 	{}
-Index: linux-3.10.12/drivers/media/usb/uvc/uvc_status.c
-===================================================================
--- linux-3.10.12.orig/drivers/media/usb/uvc/uvc_status.c	2013-09-14 15:55:12.000000000 +0200
-+++ linux-3.10.12/drivers/media/usb/uvc/uvc_status.c	2013-09-19 01:52:55.721188742 +0200
-@@ -139,6 +139,7 @@
+--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
+@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
 		switch (dev->status[0] & 0x0f) {
 		case UVC_STATUS_TYPE_CONTROL:
 			uvc_event_control(dev, dev->status, len);
@ -49,7 +45,7 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_status.c
 			break;
 
 		case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@
+@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
 	}
 
 	pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
@ -57,10 +53,8 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_status.c
 
 	/* For high-speed interrupt endpoints, the bInterval value is used as
 	 * an exponent of two. Some developers forgot about it.
-Index: linux-3.10.12/drivers/media/usb/uvc/uvc_video.c
-===================================================================
--- linux-3.10.12.orig/drivers/media/usb/uvc/uvc_video.c	2013-09-14 15:55:12.000000000 +0200
-+++ linux-3.10.12/drivers/media/usb/uvc/uvc_video.c	2013-09-19 07:31:28.642057093 +0200
+--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -21,6 +21,11 @@
 #include <linux/wait.h>
 #include <linux/atomic.h>
@ -73,7 +67,7 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_video.c
 
 #include <media/v4l2-common.h>
 
-@@ -1074,9 +1079,149 @@
+@@ -1074,9 +1079,149 @@ static void uvc_video_decode_data(struct
 	}
 }
 
@ -223,7 +217,7 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_video.c
 	/* Mark the buffer as done if the EOF marker is set. */
 	if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
 		uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1477,6 +1622,8 @@
+@@ -1477,6 +1622,8 @@ static int uvc_init_video_isoc(struct uv
 	if (npackets == 0)
 		return -ENOMEM;
 
@ -232,10 +226,8 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvc_video.c
 	size = npackets * psize;
 
 	for (i = 0; i < UVC_URBS; ++i) {
-Index: linux-3.10.12/drivers/media/usb/uvc/uvcvideo.h
-===================================================================
--- linux-3.10.12.orig/drivers/media/usb/uvc/uvcvideo.h	2013-09-14 15:55:12.000000000 +0200
-+++ linux-3.10.12/drivers/media/usb/uvc/uvcvideo.h	2013-09-19 04:36:51.801609222 +0200
+--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -137,6 +137,8 @@
 #define UVC_QUIRK_FIX_BANDWIDTH		0x00000080
 #define UVC_QUIRK_PROBE_DEF		0x00000100
@ -245,7 +237,7 @@ Index: linux-3.10.12/drivers/media/usb/uvc/uvcvideo.h
 
 /* Format flags */
 #define UVC_FMT_FLAG_COMPRESSED		0x00000001
-@@ -538,6 +540,7 @@
+@@ -538,6 +540,7 @@ struct uvc_device {
 	__u8 *status;
 	struct input_dev *input;
 	char input_phys[64];
--- a/target/linux/x86/patches-3.10/012-export_erase_write.patch
+++ b/target/linux/x86/patches-3.10/012-export_erase_write.patch
@ -11,7 +11,7 @@
 	struct erase_info erase;
 --- a/include/linux/mtd/mtd.h
 +++ b/include/linux/mtd/mtd.h
-@@ -391,6 +391,9 @@ extern void register_mtd_user (struct mt
+@@ -409,6 +409,9 @@ extern void register_mtd_user (struct mt
 extern int unregister_mtd_user (struct mtd_notifier *old);
 void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);