KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
36920 commits 1 branch 0 tags 154 MiB
Commit graph

1351 commits

Author SHA1 Message Date
Gabor Juhos
99a12119ca ar71xx: fix tl-wa901nd buttons code 
This patch fixes the code of the buttons for TP-Link WA901ND.

Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37696
 2013-08-05 09:09:39 +00:00
Gabor Juhos
6d8163505e ar71xx: add kernel support for the Netgear WNR612 v2 board 
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37575
 2013-07-28 10:23:36 +00:00
Gabor Juhos
c5029c2ebf ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board 
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37572
 2013-07-28 10:23:32 +00:00
Gabor Juhos
b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config 
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
 2013-07-28 10:23:22 +00:00
Gabor Juhos
ec7fe3fab7 ar71xx: add kernel support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37547
 2013-07-26 07:31:57 +00:00
Felix Fietkau
25d910a78f ar71xx: use uimage split for WZR-HP-G300NH2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37295
 2013-07-14 14:05:31 +00:00
Felix Fietkau
6bff456212 ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37294
 2013-07-14 14:05:27 +00:00
Felix Fietkau
fbde376c53 ar71xx: use uimage split for WZR-HP-G300NH 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37293
 2013-07-14 14:05:23 +00:00
Felix Fietkau
a7c5f6708b ar71xx: use uimage split for WZR-HP-G450H 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37292
 2013-07-14 14:05:19 +00:00
John Crispin
39531131a9 ar71xx: add carambola2 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37260
 2013-07-11 21:16:53 +00:00
Felix Fietkau
64dde7d981 ar71xx: add linux 3.10 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37214
 2013-07-09 12:52:18 +00:00
Gabor Juhos
e61a77a05c ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2 
It also fixes USB Power on MR3420v2.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37194
 2013-07-08 08:40:21 +00:00
Gabor Juhos
ca02639d17 ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360 
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37192
 2013-07-08 08:40:18 +00:00
Luka Perkov
c9926f77b4 ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type 
switch buttons should be declared as switch so the failsafe shell is not
triggered by accident in procd

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37131
 2013-07-02 10:45:32 +00:00
Gabor Juhos
5bb2e8030d ar71xx: add support for WIFI button on tp-link tl-mr3220v2 
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36848
 2013-06-04 13:25:54 +00:00
Gabor Juhos
da66ea52ec ar71xx: register USB port for RB2011U* devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36801
 2013-05-30 17:38:31 +00:00
Gabor Juhos
151dca0935 ar71xx: make the SFP port usable on RB2011*S boards 
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36799
 2013-05-30 17:38:28 +00:00
Gabor Juhos
3467b17e69 ar71xx: rb2011: add switch led control values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36796
 2013-05-30 17:38:21 +00:00
Gabor Juhos
4cf6e53ccc ar71xx: rb2011: update RGMII RX/TX delay values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36795
 2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793 ar71xx: rb2011: move NAND nCE init to rb2011_nand_init 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36794
 2013-05-30 17:38:17 +00:00
Gabor Juhos
d6554bf66a ar71xx: add kernel support for the RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36792
 2013-05-30 17:38:13 +00:00
Gabor Juhos
91d7c3efc1 ar71xx: add kernel support for the TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36788
 2013-05-30 16:23:07 +00:00
Gabor Juhos
93ce462b7e ar71xx: set eth0 mac address to match bottom label of the OM2P LC 
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36723
 2013-05-26 16:02:29 +00:00
Felix Fietkau
144cfb65a4 ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36631
 2013-05-13 19:13:33 +00:00
Gabor Juhos
10b3ca5ccb ar71xx: add kernel support for Netgear WNDAP360 
Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36578
 2013-05-08 17:03:34 +00:00
Gabor Juhos
9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support 
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
 2013-04-26 17:00:52 +00:00
Gabor Juhos
5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3 
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
 2013-04-26 17:00:48 +00:00
Gabor Juhos
f7da2127ab ar71xx: fix ethernet LEDs on the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36122
 2013-03-25 06:40:03 +00:00
Gabor Juhos
cd5cca4ba8 ar71xx: fix USB power GPIO on the TL-WDR3500 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36119
 2013-03-24 19:23:47 +00:00
Gabor Juhos
4daefc9480 ar71xx: remove numeric suffix of the TL-WDR3500 USB LED 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36118
 2013-03-24 19:23:45 +00:00
Gabor Juhos
35d41db979 ar71xx: rw2458n - Use eeprom (art) from wifi card 
Use eeprom (art) from included wifi card, not hard coded in flash.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36037
 2013-03-15 14:35:50 +00:00
Gabor Juhos
8deffcba7e ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration 
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779

Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36036
 2013-03-15 14:35:48 +00:00
Gabor Juhos
14ca5fc98b ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35966
 2013-03-11 19:52:54 +00:00
Gabor Juhos
902dd27383 ar71xx: add kernel support for MR3420v2 
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

SVN-Revision: 35961
 2013-03-11 15:55:20 +00:00
Gabor Juhos
5c5e1c0a9d ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U 
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35960
 2013-03-11 15:55:19 +00:00
Gabor Juhos
a7525f5f5d ar71xx: add kernel support for dir-835-a1 
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
 2013-03-11 15:55:13 +00:00
Gabor Juhos
1d55249d7c ar71xx: use backported QCA955x patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35878
 2013-03-04 11:48:15 +00:00
Luka Perkov
a5ebfc79ba ar71xx: rework changes from r35840 
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35865
 2013-03-03 21:59:34 +00:00
Gabor Juhos
4491da2bd4 ar71xx: update MAC address assignment for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35855
 2013-03-03 12:47:37 +00:00
Gabor Juhos
200aa6db83 ar71xx: fixes leds for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35854
 2013-03-03 12:47:33 +00:00
Luka Perkov
107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
 2013-03-01 13:46:01 +00:00
Gabor Juhos
bcac3c5569 ar71xx: fix MAC address assignment on the DIR-825-Bx boards 
Use the same MAC addresses as the original firmware.

Based on a patch from #10421.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Gabor Varga <vargagab@gmail.com>

SVN-Revision: 35730
 2013-02-21 17:58:21 +00:00
Gabor Juhos
4341b11f3e ar71xx: remove __dev{init,exit} annotations from kernel files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35687
 2013-02-19 20:52:06 +00:00
Gabor Juhos
7a709573d7 ar71xx: add kernel support for the Mikrotik RB951G board 
This is platform definition for the RB951G device. It's mostly rework
of RB2011UAS patchset with network taken from the RB751 patches.
The main difference is the flash layout used by this device.

[juhosg:
  - remove dead code from mach-rb951g
  - add "-2HnD" suffix to the machine name
  - use a separate 615-MIPS-ath79-RB951G-support.patch]

Patchwork: http://patchwork.openwrt.org/patch/3257/
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35633
 2013-02-17 10:08:35 +00:00
Felix Fietkau
2e7a4b088d ar71xx: allow unknown multicast frames to pass to the CPU on AR934x 
SVN-Revision: 35564
 2013-02-11 18:59:05 +00:00
Jonas Gorski
f07a33afc2 ar71xx: register the micro sd card reader on RB493G 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
 2013-02-10 12:31:38 +00:00
Gabor Juhos
6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix 
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
 2013-02-08 09:34:53 +00:00
Gabor Juhos
7c87d28054 ar71xx: fixes whitespaces for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
 2013-02-02 15:02:19 +00:00
Gabor Juhos
31af0dc186 ar71xx: fix mac address calculation on the OpenMesh MR600 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35446
 2013-02-02 08:47:41 +00:00
Gabor Juhos
8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
 2013-02-01 15:50:42 +00:00
Gabor Juhos
fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
 2013-02-01 15:50:37 +00:00
Gabor Juhos
5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board 
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
 2013-02-01 15:50:29 +00:00
Gabor Juhos
800da21cb1 ar71xx: add kernel support for dir-825-c1 
[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35401
 2013-01-29 22:50:50 +00:00
Gabor Juhos
5ca187570f ar71xx: add kernel support for Atheros AP132 Reference Board 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35395
 2013-01-29 19:12:30 +00:00
Gabor Juhos
8a9d92f125 ar71xx: fix ethernet device registration for the QCA9556 SoC 
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35394
 2013-01-29 19:12:28 +00:00
Gabor Juhos
df15e5cd61 ar71xx: enable fast flash read on dual-flash devices 
This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35392
 2013-01-29 19:12:25 +00:00
Gabor Juhos
ba4de984b9 ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards 
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.

Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.

Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35037
 2013-01-07 14:30:37 +00:00
Gabor Juhos
66efec6783 ar71xx: allow to register the NAND flash controller on the QCA955x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34945
 2013-01-01 13:10:36 +00:00
Gabor Juhos
1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
 2012-12-25 18:45:29 +00:00
Gabor Juhos
5dec87afef ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
 2012-12-22 12:12:48 +00:00
Gabor Juhos
4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
 2012-12-22 12:12:44 +00:00
Gabor Juhos
f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
 2012-12-22 12:12:43 +00:00
Gabor Juhos
9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
 2012-12-22 12:12:41 +00:00
Gabor Juhos
ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
 2012-12-22 12:12:40 +00:00
Gabor Juhos
a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
 2012-12-22 12:12:35 +00:00
Gabor Juhos
0767605d17 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34779
 2012-12-19 08:50:35 +00:00
Gabor Juhos
bc82db7d78 ar71xx: add kernel support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34647
 2012-12-12 16:49:49 +00:00
Gabor Juhos
75b71f4a74 ar71xx: add ap91_pci_init_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34646
 2012-12-12 16:49:48 +00:00
Gabor Juhos
1f7ae58a2c ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34588
 2012-12-10 10:38:07 +00:00
Gabor Juhos
188908e885 ar71xx: make rb750_nand driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34279
 2012-11-20 16:29:43 +00:00
Gabor Juhos
8194237789 ar71xx: make ar934x_nfc driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34278
 2012-11-20 16:29:42 +00:00
Gabor Juhos
46a3b818b9 ar71xx: remove buffer verification reference from rb4xx_nand.c 
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34276
 2012-11-20 14:40:22 +00:00
Gabor Juhos
d833ca527d ar71xx: restore rb4xx kernel partition size to the original value 
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34274
 2012-11-20 12:17:45 +00:00
Gabor Juhos
d44d954dec ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34239
 2012-11-18 10:18:01 +00:00
Gabor Juhos
d62bddc620 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34238
 2012-11-18 09:51:04 +00:00
Gabor Juhos
8d4857d677 ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34231
 2012-11-18 09:32:33 +00:00
Gabor Juhos
91bab828aa ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34187
 2012-11-13 14:48:00 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
 2012-11-04 22:08:54 +00:00
Gabor Juhos
7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
 2012-10-29 17:24:30 +00:00
Gabor Juhos
a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers 
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
 2012-10-28 12:21:15 +00:00
Gabor Juhos
e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6 
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
 2012-10-27 17:11:06 +00:00
Gabor Juhos
d54c9653e9 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
 2012-10-27 08:55:38 +00:00
Gabor Juhos
269872fe1e ar71xx: use mtd_read in wrt160nl_part 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
 2012-10-27 07:57:58 +00:00
Gabor Juhos
973eda6077 ar71xx: use mtd_read in tplinkpart 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
 2012-10-27 07:57:57 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
 2012-10-19 18:32:49 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
 2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
 2012-10-17 18:27:45 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
 2012-10-17 08:26:01 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board 
SVN-Revision: 33621
 2012-10-04 20:16:03 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
SVN-Revision: 33575
 2012-09-27 20:05:42 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU 
SVN-Revision: 33539
 2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
SVN-Revision: 33538
 2012-09-25 12:57:38 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

SVN-Revision: 33535
 2012-09-24 18:45:56 +00:00
Gabor Juhos
7c85646176 ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
SVN-Revision: 33454
 2012-09-17 20:30:55 +00:00
Gabor Juhos
3bdf0bc36f ar71xx: ar934x_nfc: increase DMA retry count 
SVN-Revision: 33453
 2012-09-17 20:30:54 +00:00
Gabor Juhos
b7cb43f6a6 ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
SVN-Revision: 33452
 2012-09-17 20:30:53 +00:00
Gabor Juhos
96dde2e591 ar71xx: ar934x_nfc: fix RNDOUT operation 
SVN-Revision: 33451
 2012-09-17 20:30:51 +00:00
Gabor Juhos
338b698fb6 ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
SVN-Revision: 33450
 2012-09-17 20:30:50 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011 
SVN-Revision: 33388
 2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller 
SVN-Revision: 33387
 2012-09-13 07:26:25 +00:00
Gabor Juhos
1e5fdbeae5 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
SVN-Revision: 33385
 2012-09-13 07:26:22 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD 
SVN-Revision: 33349
 2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
SVN-Revision: 33348
 2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines 
SVN-Revision: 33347
 2012-09-09 14:05:28 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011 
SVN-Revision: 33345
 2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
 2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
SVN-Revision: 33343
 2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation 
SVN-Revision: 33342
 2012-09-09 14:05:17 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751 
SVN-Revision: 33338
 2012-09-08 17:51:56 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

SVN-Revision: 33310
 2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
 2012-08-29 10:37:54 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support 
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
 2012-08-29 10:11:55 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
 2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
 2012-08-27 14:55:26 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board 
SVN-Revision: 33231
 2012-08-22 20:09:13 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c 
SVN-Revision: 33227
 2012-08-22 12:42:59 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias 
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
 2012-08-22 12:33:22 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600 
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
 2012-08-22 09:43:18 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED 
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
 2012-08-22 09:10:24 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Gabor Juhos
7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N 
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
 2012-07-05 16:25:26 +00:00
Gabor Juhos
797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board 
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
 2012-07-05 08:26:53 +00:00
Gabor Juhos
d1b237b335 ar71xx: add initial support for the QCA955X SoCs 
SVN-Revision: 32606
 2012-07-05 08:26:47 +00:00
Gabor Juhos
b8618fd3f2 ar71xx: improve MDIO busy wait code 
SVN-Revision: 32586
 2012-07-03 15:24:02 +00:00
Gabor Juhos
86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N 
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
 2012-07-03 15:24:01 +00:00
Gabor Juhos
8b9931fd27 ar71xx: add support for the TL-WDR4300 board 
SVN-Revision: 32459
 2012-06-19 11:51:17 +00:00
Gabor Juhos
f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h 
SVN-Revision: 32455
 2012-06-19 10:13:43 +00:00
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
SVN-Revision: 31956
 2012-05-28 20:39:50 +00:00
Felix Fietkau
367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
SVN-Revision: 31934
 2012-05-28 02:55:59 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
SVN-Revision: 31925
 2012-05-27 21:02:41 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
SVN-Revision: 31736
 2012-05-15 10:36:39 +00:00
Felix Fietkau
0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
SVN-Revision: 31637
 2012-05-06 21:19:14 +00:00
Gabor Juhos
ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
 2012-05-05 17:02:35 +00:00
Gabor Juhos
3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs 
SVN-Revision: 31533
 2012-04-29 18:29:24 +00:00
Gabor Juhos
a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x 
SVN-Revision: 31476
 2012-04-25 13:02:11 +00:00
Gabor Juhos
408de85883 ar71xx: use ap91_pci_init for RB751{,G} 
SVN-Revision: 31356
 2012-04-19 21:31:48 +00:00
Gabor Juhos
0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup 
SVN-Revision: 31355
 2012-04-19 21:31:43 +00:00
Gabor Juhos
78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper 
SVN-Revision: 31354
 2012-04-19 21:31:42 +00:00
Gabor Juhos
5c9ca38e47 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

SVN-Revision: 31353
 2012-04-19 21:31:40 +00:00
Gabor Juhos
e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
 2012-04-06 06:45:07 +00:00
Gabor Juhos
b77217d963 ar71xx: boost SPI flash read performance 
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
 2012-03-27 19:38:17 +00:00
Gabor Juhos
6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
 2012-03-27 19:38:07 +00:00
Gabor Juhos
61ee283899 ar71xx: remove the built-in MTD map of the PB92 board 
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
 2012-03-27 19:38:05 +00:00
Gabor Juhos
1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices 
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
 2012-03-27 19:38:04 +00:00
Gabor Juhos
87e4ec687b ar71xx: remove the built-in MTD maps of several boards 
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
 2012-03-27 19:38:01 +00:00
Gabor Juhos
f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4 
SVN-Revision: 31102
 2012-03-27 19:37:51 +00:00
Gabor Juhos
8a2e4b49de ar71xx: add initial support for RB750GL 
SVN-Revision: 31025
 2012-03-19 15:57:04 +00:00
Gabor Juhos
d19f3dd512 ar71xx: make rb750_latch_change 'static void' 
SVN-Revision: 31024
 2012-03-19 15:57:03 +00:00
Gabor Juhos
5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data 
SVN-Revision: 31023
 2012-03-19 15:57:01 +00:00
Gabor Juhos
8a471efe01 ar71xx: add platform data for the RB750 NAND driver 
SVN-Revision: 31022
 2012-03-19 15:56:59 +00:00
Gabor Juhos
e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0 
SVN-Revision: 31017
 2012-03-19 11:11:20 +00:00
Gabor Juhos
6036151187 ar71xx: add support for the jjPlus JA76PF2 board 
SVN-Revision: 30957
 2012-03-16 18:00:34 +00:00
Gabor Juhos
a680662391 ar71xx: change LED name prefix on the jjplus boards 
SVN-Revision: 30956
 2012-03-16 18:00:26 +00:00
Gabor Juhos
c00b53f3d0 ar71xx: move micrel PHY driver to the generic linux target 
SVN-Revision: 30946
 2012-03-15 09:25:53 +00:00
Gabor Juhos
ff909edf94 ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports 
SVN-Revision: 30926
 2012-03-13 17:29:38 +00:00
Gabor Juhos
cd6a4cde13 ar71xx: ag71xx: start aneg on switch PHYs after reset 
SVN-Revision: 30925
 2012-03-13 17:29:37 +00:00
Gabor Juhos
7c9534cfd7 ar71xx: ag71xx: poll PHY status of all available switch ports 
SVN-Revision: 30924
 2012-03-13 17:29:36 +00:00
Gabor Juhos
8449eecf5f ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch 
SVN-Revision: 30923
 2012-03-13 17:29:34 +00:00
Gabor Juhos
1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration 
SVN-Revision: 30922
 2012-03-13 17:29:33 +00:00
Gabor Juhos
66df117d1b ar71xx: use a dummy callback for interfaces with fixed speed 
SVN-Revision: 30913
 2012-03-12 20:38:58 +00:00
Gabor Juhos
8b2b37ae58 ar71xx: merge ar934x_bo_ddr_flush patch 
SVN-Revision: 30912
 2012-03-12 20:38:57 +00:00
Gabor Juhos
2d89fa7f43 ar71xx: fix WPS button polarity on TL-WR2543N 
SVN-Revision: 30849
 2012-03-07 19:50:53 +00:00
Gabor Juhos
c455a0f7be ar71xx: ag71xx: fix get_port_link callback 
SVN-Revision: 30841
 2012-03-07 16:32:35 +00:00
Gabor Juhos
5a83b3a5c7 ar71xx: ag71xx: use the generic get_port_link implementation 
SVN-Revision: 30840
 2012-03-07 16:32:34 +00:00
Gabor Juhos
7052847972 ar71xx: ag71xx: keep VLAN tags if VLAN is not enabled 
SVN-Revision: 30768
 2012-03-01 19:49:05 +00:00
Gabor Juhos
766999085a ar71xx: ag71xx: add BQL support 
It will be usable only from linux-3.3.

Based on a patch by Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 30417
 2012-02-10 14:56:47 +00:00
Gabor Juhos
32a18a05f8 ar71xx: add preliminary support for 3.3 
SVN-Revision: 30410
 2012-02-10 11:53:56 +00:00
Gabor Juhos
fe0c7aac66 ar71xx: merge 3.2 fixes 
SVN-Revision: 30406
 2012-02-10 08:19:33 +00:00
Gabor Juhos
d72bde99cd ar71xx: merge files-3.2 to files 
SVN-Revision: 30405
 2012-02-10 08:19:31 +00:00
Gabor Juhos
d5d37febb4 ar71xx: use dynamically allocated partitions in wrt160nl_part 
SVN-Revision: 29970
 2012-01-31 18:36:51 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39 
SVN-Revision: 29867
 2012-01-22 22:38:11 +00:00
Gabor Juhos
e7dee3aeed ar71xx: wrt160nl_part: include module.h and fix compiler warnings 
SVN-Revision: 29856
 2012-01-22 17:55:38 +00:00
Gabor Juhos
a7d344565b ar71xx: tplinkpart: include module.h 
SVN-Revision: 29855
 2012-01-22 17:55:36 +00:00
Gabor Juhos
6c2638c5e2 ar71xx: rename vsc7385 spi driver 
SVN-Revision: 29853
 2012-01-22 13:51:57 +00:00
Gabor Juhos
bb16739db9 ar71xx: rename ap81 spi driver 
SVN-Revision: 29852
 2012-01-22 13:51:56 +00:00
Gabor Juhos
5ef8b922fa ar71xx: rename rb4xx spi drivers 
SVN-Revision: 29851
 2012-01-22 13:51:54 +00:00
Gabor Juhos
aad175d5b6 ar71xx: rename the nxp_74hc153 driver 
SVN-Revision: 29850
 2012-01-22 13:51:52 +00:00
Gabor Juhos
ef1c53b7b7 ar71xx: change board id of the UniFi board 
SVN-Revision: 29849
 2012-01-22 13:51:50 +00:00
Gabor Juhos
f90e578903 ar71xx: include linux/module.h in the micrel phy driver 
SVN-Revision: 29848
 2012-01-22 13:51:49 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
SVN-Revision: 29713
 2012-01-11 18:00:50 +00:00
Gabor Juhos
88d8cdd503 ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710
 2012-01-11 09:14:18 +00:00
Gabor Juhos
e1b7995aef ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
SVN-Revision: 29709
 2012-01-11 09:14:17 +00:00
Gabor Juhos
67444c7795 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
SVN-Revision: 29708
 2012-01-11 09:14:15 +00:00
Gabor Juhos
0f566a376c ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707
 2012-01-11 09:14:14 +00:00
Gabor Juhos
09a6e3f662 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
SVN-Revision: 29706
 2012-01-11 09:14:13 +00:00
Gabor Juhos
714a9bd641 ar71xx: ar71xx_wdt: add shutdown handler 
SVN-Revision: 29705
 2012-01-11 09:14:11 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers 
SVN-Revision: 29667
 2012-01-05 18:08:33 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos
44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
850be54b72 ar71xx: tplinkpart: allow to detect JFFS2 as well 
SVN-Revision: 29543
 2011-12-15 22:03:40 +00:00
Gabor Juhos
b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00
Gabor Juhos
0655552860 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
SVN-Revision: 29540
 2011-12-15 13:25:21 +00:00
Gabor Juhos
204fc6bed5 ar71xx: ag71xx: nuke ar7240sw_init 
SVN-Revision: 29539
 2011-12-15 13:25:20 +00:00
Gabor Juhos
d1f7783612 ar71xx: fix mac addresses on jjPlus devices 
SVN-Revision: 29538
 2011-12-15 13:25:18 +00:00
Gabor Juhos
b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board 
SVN-Revision: 29535
 2011-12-14 20:54:10 +00:00
Gabor Juhos
66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X 
SVN-Revision: 29534
 2011-12-14 20:54:07 +00:00
Felix Fietkau
7076d74b21 ar71xx: fix gpio count for ar7241/ar7242 
SVN-Revision: 29532
 2011-12-14 20:47:24 +00:00
Felix Fietkau
b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
SVN-Revision: 29531
 2011-12-14 20:21:42 +00:00
Felix Fietkau
4a441570ca kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
SVN-Revision: 29516
 2011-12-13 15:14:59 +00:00
Felix Fietkau
3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h 
SVN-Revision: 29515
 2011-12-13 15:00:43 +00:00
Gabor Juhos
2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
 2011-12-13 14:59:43 +00:00
Gabor Juhos
058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
 2011-12-13 14:59:40 +00:00
Felix Fietkau
48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h 
SVN-Revision: 29509
 2011-12-13 13:33:44 +00:00
Gabor Juhos
4ca2d86493 ar71xx: use RedBoot parser on PB44 
SVN-Revision: 29501
 2011-12-11 15:52:47 +00:00
Gabor Juhos
bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices 
SVN-Revision: 29458
 2011-12-05 21:10:58 +00:00
Gabor Juhos
0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
SVN-Revision: 29457
 2011-12-05 21:10:55 +00:00
Gabor Juhos
ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
SVN-Revision: 29456
 2011-12-05 18:21:15 +00:00
Gabor Juhos
3e7a6d182a ar71xx: check squashfs signature in TP-Link mtd parser 
SVN-Revision: 29446
 2011-12-05 14:52:33 +00:00
Felix Fietkau
1f809532de ar71xx: add preliminary support for wzr-hp-g450h 
SVN-Revision: 29441
 2011-12-05 14:20:51 +00:00
Felix Fietkau
d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
SVN-Revision: 29440
 2011-12-05 14:20:44 +00:00
Gabor Juhos
4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling 
SVN-Revision: 29434
 2011-12-05 13:03:54 +00:00
Gabor Juhos
7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

SVN-Revision: 29416
 2011-12-03 18:13:31 +00:00
Gabor Juhos
514b1167c9 ar71xx: add mtd partition parser for the TP-Link boards 
SVN-Revision: 29415
 2011-12-03 18:13:27 +00:00
Gabor Juhos
fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards 
SVN-Revision: 29414
 2011-12-03 18:13:25 +00:00
Gabor Juhos
9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board 
SVN-Revision: 29413
 2011-12-03 18:13:23 +00:00
Gabor Juhos
67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

SVN-Revision: 29412
 2011-12-03 18:13:20 +00:00
Gabor Juhos
f188f1bad5 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
 2011-12-01 22:49:02 +00:00
Gabor Juhos
f20797306a ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
 2011-11-24 20:09:43 +00:00
Gabor Juhos
c20d7378e5 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
 2011-11-24 20:09:38 +00:00
Gabor Juhos
9990523a0f ar71xx: set GE0 phy_mask for AR933x 
SVN-Revision: 29274
 2011-11-20 11:30:10 +00:00
Gabor Juhos
f27548448b ar71xx: fix USB LED on the DB120 board 
SVN-Revision: 29126
 2011-11-14 17:43:15 +00:00
Gabor Juhos
6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin 
SVN-Revision: 29125
 2011-11-14 17:43:14 +00:00
Gabor Juhos
0c1d3617d7 ar71xx: fix GPIO function handling on AR934x 
SVN-Revision: 29124
 2011-11-14 17:43:13 +00:00
Gabor Juhos
aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
SVN-Revision: 29123
 2011-11-14 17:43:11 +00:00
Gabor Juhos
62a7795afd ar71xx: merge nand scan patch 
SVN-Revision: 29122
 2011-11-14 17:43:10 +00:00
Gabor Juhos
12dae96097 ar71xx: fix a compiler warning 
SVN-Revision: 29110
 2011-11-14 13:07:47 +00:00
Gabor Juhos
5ae0fd802c ar71xx: fix GPIO count for AR934x 
SVN-Revision: 29109
 2011-11-14 13:07:45 +00:00
Gabor Juhos
e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
SVN-Revision: 29108
 2011-11-14 11:49:53 +00:00
Gabor Juhos
3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
SVN-Revision: 29107
 2011-11-14 11:49:51 +00:00
Gabor Juhos
42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
SVN-Revision: 29106
 2011-11-14 11:49:49 +00:00
Gabor Juhos
c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init 
SVN-Revision: 29105
 2011-11-14 11:49:47 +00:00
Gabor Juhos
cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files 
SVN-Revision: 29103
 2011-11-14 07:38:09 +00:00
Gabor Juhos
defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
SVN-Revision: 29102
 2011-11-14 07:38:07 +00:00
Gabor Juhos
6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
SVN-Revision: 29101
 2011-11-14 07:38:05 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos
d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos
34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos
2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Felix Fietkau
7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau
94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos
4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions 
SVN-Revision: 28800
 2011-11-07 12:59:03 +00:00
Gabor Juhos
4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
SVN-Revision: 28709
 2011-11-01 14:38:12 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos
21e651c9a1 ar71xx: add AR933X GMAC register defines 
SVN-Revision: 28705
 2011-11-01 11:20:50 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Jonas Gorski
c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Felix Fietkau
1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Felix Fietkau
4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau
d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau
500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Felix Fietkau
9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Felix Fietkau
9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Felix Fietkau
c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau
ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau
005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau
e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau
255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos
6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver 
SVN-Revision: 27222
 2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X 
SVN-Revision: 27221
 2011-06-19 13:17:50 +00:00
Gabor Juhos
b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver 
SVN-Revision: 27166
 2011-06-13 08:12:40 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code 
SVN-Revision: 27165
 2011-06-13 08:12:38 +00:00
Gabor Juhos
13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
 2011-06-04 12:30:10 +00:00
Gabor Juhos
ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards 
SVN-Revision: 27101
 2011-06-04 12:30:09 +00:00
Felix Fietkau
31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos
750af1522b ar71xx: init external_reset for AR933X 
SVN-Revision: 27083
 2011-06-01 13:12:30 +00:00
Gabor Juhos
af4cae4498 ar71xx: add external_reset field to ath9k_platform_data 
SVN-Revision: 27082
 2011-06-01 13:12:28 +00:00
Gabor Juhos
f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1 
SVN-Revision: 27081
 2011-06-01 13:12:27 +00:00
Gabor Juhos
1a54e33c17 ar71xx: add get_mac_revision to ath9k_platform_data 
SVN-Revision: 27080
 2011-06-01 13:12:26 +00:00
Gabor Juhos
34ff32a6eb ar71xx: export SoC revision 
SVN-Revision: 27079
 2011-06-01 13:12:24 +00:00
Felix Fietkau
4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
SVN-Revision: 27075
 2011-06-01 02:23:26 +00:00
Gabor Juhos
f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards 
SVN-Revision: 27067
 2011-05-31 22:53:43 +00:00
Gabor Juhos
8beff081eb ar71xx: register UART for the AR933X SoCs 
SVN-Revision: 27066
 2011-05-31 22:53:42 +00:00
Gabor Juhos
b460bc6f12 ar71xx: add serial driver for the AR933X UART 
SVN-Revision: 27065
 2011-05-31 22:53:40 +00:00
Gabor Juhos
c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs 
SVN-Revision: 27064
 2011-05-31 22:53:39 +00:00
Gabor Juhos
e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs 
SVN-Revision: 27063
 2011-05-31 22:53:37 +00:00
Gabor Juhos
e0a0f3796a ar71xx: enable USB support for the AR933x SoCs 
SVN-Revision: 27062
 2011-05-31 22:53:36 +00:00
Gabor Juhos
677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop} 
SVN-Revision: 27061
 2011-05-31 22:53:35 +00:00
Gabor Juhos
88c45e3130 ar71xx: the watchdog uses the reference clock on the AR933x SoCs 
SVN-Revision: 27060
 2011-05-31 22:53:34 +00:00
Gabor Juhos
7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization 
SVN-Revision: 27059
 2011-05-31 22:53:32 +00:00
Gabor Juhos
e6fde61bec ar71xx: don't register 8250 UART on the AR933x SoCs 
SVN-Revision: 27058
 2011-05-31 22:53:31 +00:00
Gabor Juhos
8f7541a044 ar71xx: enable GPIO support for the AR933x SoCs 
SVN-Revision: 27057
 2011-05-31 22:53:30 +00:00
Gabor Juhos
e11b9c8371 ar71xx: add AR933x specific frequency initialization code 
SVN-Revision: 27056
 2011-05-31 22:53:29 +00:00
Gabor Juhos
0bf4478d37 ar71xx: add AR933x specific early_printk support 
SVN-Revision: 27055
 2011-05-31 22:53:27 +00:00
Gabor Juhos
6b3ca9ef0b ar71xx: add preliminary support for the Atheros AR933x SoCs 
SVN-Revision: 27054
 2011-05-31 22:53:26 +00:00
Gabor Juhos
0677e16248 ar71xx: Fix header offset for newer WRT160NL models 
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27049
 2011-05-31 22:53:20 +00:00
Gabor Juhos
be97e2a043 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols 
SVN-Revision: 27048
 2011-05-31 22:53:19 +00:00
Gabor Juhos
5d5f72415e ar71xx: initialize is_clk_25mhz field for AR9340 WMAC 
SVN-Revision: 27045
 2011-05-31 22:53:15 +00:00
Gabor Juhos
f7b3c3dfd1 ar71xx: sync ath9k_platform_data.h with compat-wireless 
SVN-Revision: 27044
 2011-05-31 22:53:14 +00:00
Gabor Juhos
60d5abbc27 ar71xx: ag71xx: make ring sizes configurable via ethtool 
SVN-Revision: 27041
 2011-05-31 22:53:10 +00:00
Gabor Juhos
7a2651f633 ar71xx: ag71xx: prepare to make ring sizes configurable 
SVN-Revision: 27040
 2011-05-31 22:53:09 +00:00
Gabor Juhos
669aba3871 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

SVN-Revision: 27039
 2011-05-31 22:53:07 +00:00
Felix Fietkau
2b5402d128 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
SVN-Revision: 27035
 2011-05-30 23:08:01 +00:00
Felix Fietkau
0ebc93831f ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
SVN-Revision: 27034
 2011-05-30 23:07:57 +00:00
Matteo Croce
17e257925f ar71xx: don't probe the LAN PHY 
SVN-Revision: 26924
 2011-05-17 11:15:24 +00:00
Matteo Croce
4deecea26b ar71xx: detect link on LAN ports 
SVN-Revision: 26922
 2011-05-17 11:12:56 +00:00
Matteo Croce
2ea528d1d0 ar71xx: add link detection on Ubiquiti devices WAN port 
SVN-Revision: 26891
 2011-05-14 23:31:50 +00:00
Matteo Croce
c0c2e18452 use correct macros and frame size in ag71xx 
SVN-Revision: 26890
 2011-05-14 23:10:06 +00:00
Matteo Croce
99d1d4f795 ar71xx: cosmetic fixes 
SVN-Revision: 26889
 2011-05-14 23:08:00 +00:00
Gabor Juhos
9b5036a29d ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

SVN-Revision: 26862
 2011-05-08 21:38:51 +00:00
Gabor Juhos
869f3cb718 ar71xx: remove superfluous fifo_cfg overrides 
SVN-Revision: 26859
 2011-05-08 21:38:46 +00:00
Gabor Juhos
5d77f370d6 ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856
 2011-05-08 16:32:53 +00:00
Gabor Juhos
3711658281 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855
 2011-05-08 13:30:36 +00:00
Gabor Juhos
ef53029870 ar71xx: ag71xx: fix build error if debugfs is enabled 
SVN-Revision: 26854
 2011-05-08 13:30:26 +00:00
Gabor Juhos
8b67d748cb ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
SVN-Revision: 26845
 2011-05-07 12:40:34 +00:00
Gabor Juhos
2166432ba0 ar71xx: ag71xx: add timestamps to ag71xx_buf 
SVN-Revision: 26844
 2011-05-07 12:40:28 +00:00
Gabor Juhos
896e1d1ab4 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
SVN-Revision: 26843
 2011-05-07 12:40:26 +00:00
Gabor Juhos
a6708d20d1 ar71xx: ag71xx: use debugfs_remove_recursive 
SVN-Revision: 26842
 2011-05-07 12:40:25 +00:00
Gabor Juhos
c39e5b9360 ar71xx: override wmac device name for the AR934x SoCs 
SVN-Revision: 26840
 2011-05-07 09:23:32 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
SVN-Revision: 26779
 2011-04-28 21:27:42 +00:00
Felix Fietkau
36aecb08b8 ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
SVN-Revision: 26777
 2011-04-28 19:30:49 +00:00
Gabor Juhos
fa9f45f345 ar71xx: fix build error w/o CONFIG_PCI 
SVN-Revision: 26606
 2011-04-12 13:14:56 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons 
SVN-Revision: 26603
 2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
 2011-04-12 09:29:10 +00:00
Gabor Juhos
ef4c1d49a6 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac 
SVN-Revision: 26595
 2011-04-11 17:37:08 +00:00
Gabor Juhos
4711dea8ff ar71xx: fix AR934X_WMAC_SIZE 
SVN-Revision: 26594
 2011-04-11 17:37:03 +00:00
Gabor Juhos
8586e61b00 ar71xx: fix section mismatch 
SVN-Revision: 26562
 2011-04-09 18:47:55 +00:00
Gabor Juhos
a8bf5e3cdb ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq 
Also initialize that for each SoC and print its value along with the
other frequencies.

SVN-Revision: 26561
 2011-04-09 18:47:52 +00:00
Gabor Juhos
5573d6eb28 ar71xx: show the SoC type earlier 
SVN-Revision: 26560
 2011-04-09 18:47:50 +00:00
Gabor Juhos
ab4c3b3a1c ar71xx: cleanup SoC detection code 
SVN-Revision: 26559
 2011-04-09 18:47:49 +00:00
Gabor Juhos
3310c70702 ar71xx: Fix mac address offset for AR934x 
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

SVN-Revision: 26557
 2011-04-09 18:47:42 +00:00
Gabor Juhos
8f889f9250 ar71xx: add DB120 board specific PCI initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26523
 2011-04-07 20:53:41 +00:00
Gabor Juhos
a0c3d49064 ar71xx: register WMAC device on the DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26522
 2011-04-07 20:53:37 +00:00
Gabor Juhos
428888faec ar71xx: add support for the built-in WMAC of the AR934x 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26521
 2011-04-07 20:53:34 +00:00
Gabor Juhos
14b42c44ec ar71xx: add initial support for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26518
 2011-04-07 20:53:19 +00:00
Gabor Juhos
2b064bb398 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26516
 2011-04-07 20:53:10 +00:00
Gabor Juhos
e4555809c7 ar71xx: enable PCI for the AR934[24] SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26515
 2011-04-07 20:53:05 +00:00
Gabor Juhos
4f395745af ar71xx: enable USB support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26514
 2011-04-07 20:53:03 +00:00
Gabor Juhos
25693b4769 ar71xx: enable GPIO support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26513
 2011-04-07 20:53:00 +00:00
Gabor Juhos
334a5ec36e ar71xx: add AR934x specific glue for ar7100_device{start,stop} 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26512
 2011-04-07 20:52:57 +00:00
Gabor Juhos
ccd3ebd309 ar71xx: add AR934x specific UART clock initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26511
 2011-04-07 20:52:53 +00:00
Gabor Juhos
91470edada ar71xx: add AR934x specific glue for IRQ initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26510
 2011-04-07 20:52:49 +00:00
Gabor Juhos
3b209880bc ar71xx: add initial support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26509
 2011-04-07 20:52:45 +00:00
Felix Fietkau
98c78c13db ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection 
SVN-Revision: 26394
 2011-04-02 00:47:33 +00:00
Felix Fietkau
41ee4a283c ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead 
SVN-Revision: 26393
 2011-04-02 00:47:29 +00:00
Felix Fietkau
acbb3e50e7 ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts 
SVN-Revision: 26392
 2011-04-02 00:47:25 +00:00
Gabor Juhos
8eb616de82 ar71xx: add support for the TP-Link TL-WA901ND v2 board 
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26119
 2011-03-13 15:08:31 +00:00
Felix Fietkau
5bddd70a37 Revert "ar71xx: add missing gpio_set_debounce function" - wrong target 
SVN-Revision: 25854
 2011-03-03 16:21:23 +00:00
Felix Fietkau
57a14f4e15 ar71xx: add missing gpio_set_debounce function 
SVN-Revision: 25848
 2011-03-03 10:33:35 +00:00
Gabor Juhos
256169cbd0 ar71xx: add rtl8366s initvals for the DIR-825 board 
SVN-Revision: 25121
 2011-01-26 20:35:47 +00:00
Gabor Juhos
67c3e0bf7e ar71xx: add support for the WNDR3700v2 board 
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
 2011-01-26 20:35:42 +00:00
Jo-Philipp Wich
18ed5bca9b fix null pointer access in mach-dir-600-a1.c machine setup (#8671) 
SVN-Revision: 25043
 2011-01-18 18:04:50 +00:00
Gabor Juhos
b67bbfe287 ar71xx: fix wlan LED on the TL-WR741 board 
* Patch from #8630

SVN-Revision: 24963
 2011-01-11 08:20:47 +00:00
Gabor Juhos
dd53effe15 ar71xx: fix wrong names of the WPS LED/button 
Reported-by: Nuno Gonçalves

SVN-Revision: 24961
 2011-01-10 18:15:47 +00:00
Gabor Juhos
23a6173099 ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver 
SVN-Revision: 24944
 2011-01-09 09:29:45 +00:00
Gabor Juhos
0de8689b70 ar71xx: use spinlock in ar71xx_device_{start,stop} 
SVN-Revision: 24929
 2011-01-08 11:28:32 +00:00
Felix Fietkau
6acfae9379 ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC 
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24723
 2010-12-19 11:56:42 +00:00
Gabor Juhos
cafe08a1b2 ar71xx: remove stray semicolons 
SVN-Revision: 24651
 2010-12-17 17:57:20 +00:00
Gabor Juhos
01c76bf128 ar71xx: fix WLAN LEDs on the DIR-825 board 
SVN-Revision: 24650
 2010-12-17 17:10:21 +00:00
Gabor Juhos
c1d3a23d19 ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards 
SVN-Revision: 24649
 2010-12-17 17:10:19 +00:00
Gabor Juhos
8390b7dc9b ar71xx: UBNT Secondary MAC address duplicate fix 
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
 2010-12-17 17:10:01 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND 
SVN-Revision: 24612
 2010-12-15 19:55:50 +00:00
Gabor Juhos
e421d2575f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24611
 2010-12-15 19:55:47 +00:00
Gabor Juhos
6c1ace2f28 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
SVN-Revision: 24569
 2010-12-14 18:01:04 +00:00
Gabor Juhos
a7750dae90 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
SVN-Revision: 24568
 2010-12-14 18:01:00 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board 
SVN-Revision: 24444
 2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
 2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
SVN-Revision: 24439
 2010-12-10 17:57:48 +00:00
Felix Fietkau
8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 
SVN-Revision: 24236
 2010-12-04 01:32:15 +00:00
Gabor Juhos
9971dfe059 ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage 
r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 24036
 2010-11-19 07:24:00 +00:00
Gabor Juhos
920a34c0ce ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23983
 2010-11-12 18:52:45 +00:00
Gabor Juhos
3106aea40b ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23982
 2010-11-12 18:52:28 +00:00