ar71xx: add support for Buffalo WZR 600DHP

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
This commit is contained in:
Luka Perkov 2013-03-01 13:46:01 +00:00
parent 819472b2d0
commit 107e0c6d1f
21 changed files with 78 additions and 27 deletions

View file

@ -1,6 +1,6 @@
#!/bin/sh
#
# Copyright (C) 2011-2012 OpenWrt.org
# Copyright (C) 2011-2013 OpenWrt.org
#
[ -e /etc/config/ubootenv ] && exit 0
@ -27,6 +27,10 @@ om2p-hs | \
om2p-lc)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
wzr-hp-ag300h | \
wzr-600dhp)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
;;
esac
config_load ubootenv

View file

@ -152,7 +152,8 @@ get_status_led() {
status_led="buffalo:green:status"
;;
wzr-hp-ag300h | \
wzr-hp-g300nh2)
wzr-hp-g300nh2 | \
wzr-600dhp)
status_led="buffalo:red:diag"
;;
wndr3700)

View file

@ -42,7 +42,8 @@ if [ $phyname -a $ACTION = "add" ]; then
. /lib/ar71xx.sh
case $(ar71xx_board_name) in
wzr-hp-ag300h)
wzr-hp-ag300h|\
wzr-600dhp)
ar922x_disable_gpio_jtag $phyname
;;
esac;

View file

@ -212,7 +212,8 @@ wlae-ag300n)
ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
;;
wzr-hp-ag300h)
wzr-hp-ag300h | \
wzr-600dhp)
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"
ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1"

View file

@ -233,7 +233,8 @@ tl-wr841n-v7 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
wzr-hp-ag300h)
wzr-hp-ag300h |\
wzr-600dhp)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"

View file

@ -75,6 +75,7 @@ whr-hp-g300n|\
whr-hp-gn|\
wzr-hp-ag300h|\
wzr-hp-g450h|\
wzr-600dhp|\
ew-dorin|\
ew-dorin-router)
migrate_switch_name "eth0" "switch0"

View file

@ -468,6 +468,9 @@ ar71xx_board_detect() {
*WZR-HP-G300NH2)
name="wzr-hp-g300nh2"
;;
*WZR-600DHP)
name="wzr-600dhp"
;;
*WHR-HP-G300N)
name="whr-hp-g300n"
;;

View file

@ -125,6 +125,7 @@ platform_check_image() {
wzr-hp-g300nh | \
wzr-hp-g450h | \
wzr-hp-ag300h | \
wzr-600dhp | \
whr-g301n | \
whr-hp-g300n | \
whr-hp-gn | \

View file

@ -92,6 +92,7 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
CONFIG_ATH79_MACH_WZR_HP_G450H=y
CONFIG_ATH79_MACH_WZR_600DHP=y
CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y

View file

@ -92,6 +92,7 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
CONFIG_ATH79_MACH_WZR_HP_G450H=y
CONFIG_ATH79_MACH_WZR_600DHP=y
CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y

View file

@ -36,7 +36,6 @@ static struct mtd_partition wzrhpag300h_flash_partitions[] = {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x0050000,
@ -212,3 +211,6 @@ static void __init wzrhpag300h_setup(void)
MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
"Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
MIPS_MACHINE(ATH79_MACH_WZR_600DHP, "WZR-600DHP",
"Buffalo WZR-600DHP", wzrhpag300h_setup);

View file

@ -1,5 +1,5 @@
#
# Copyright (C) 2009 OpenWrt.org
# Copyright (C) 2009-2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@ -49,6 +49,17 @@ endef
$(eval $(call Profile,WZRHPG450H))
define Profile/WZR600DHP
NAME:=Buffalo WZR-600DHP
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
endef
define Profile/WZR600DHP/Description
Package set optimized for the Buffalo WZR-600DHP
endef
$(eval $(call Profile,WZR600DHP))
define Profile/WHRG301N
NAME:=Buffalo WHR-G301N
PACKAGES:=

View file

@ -960,6 +960,7 @@ $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_128k),WZRHPG300NH,wzr-hp-g300nh,WZR
$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZR600DHP,wzr-600dhp,WZR-600DHP,ttyS0,115200,WZR-600DHP))
$(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
$(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,112 @@
@@ -16,22 +16,113 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@ -108,6 +108,7 @@
+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
+ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */
+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
};
@ -216,7 +217,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -68,6 +148,488 @@ config ATH79_MACH_PB44
@@ -68,6 +148,497 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@ -293,6 +294,15 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_600DHP
+ bool "Buffalo WZR-600DHP board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WP543
+ bool "Compex WP543/WPJ543 board support"
+ select SOC_AR71XX
@ -705,7 +715,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
select SOC_AR724X
@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM
@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -730,7 +740,7 @@
endmenu
config SOC_AR71XX
@@ -118,10 +698,6 @@ config SOC_QCA955X
@@ -118,10 +707,6 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
@ -741,7 +751,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -132,7 +708,14 @@ config ATH79_DEV_DSA
@@ -132,7 +717,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -757,7 +767,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP
@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
@ -767,7 +777,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@ -837,6 +847,7 @@
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
+
--- a/arch/mips/ath79/prom.c

View file

@ -10,7 +10,7 @@
ATH79_MACH_EAP7660D, /* Senao EAP7660D */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1
@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1
select ATH79_DEV_M25P80
select ATH79_DEV_USB

View file

@ -10,7 +10,7 @@
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2
@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View file

@ -10,7 +10,7 @@
ATH79_MACH_RW2458N, /* Redwave RW2458N */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -360,6 +360,16 @@ config ATH79_MACH_RB750
@@ -369,6 +369,16 @@ config ATH79_MACH_RB750
select ATH79_ROUTERBOOT
select RLE_DECOMPRESS

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,112 @@
@@ -16,22 +16,113 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@ -108,6 +108,7 @@
+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
+ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */
+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
};
@ -216,7 +217,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -68,6 +148,488 @@ config ATH79_MACH_PB44
@@ -68,6 +148,497 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@ -293,6 +294,15 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_600DHP
+ bool "Buffalo WZR-600DHP board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WP543
+ bool "Compex WP543/WPJ543 board support"
+ select SOC_AR71XX
@ -705,7 +715,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
select SOC_AR724X
@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM
@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -730,7 +740,7 @@
endmenu
config SOC_AR71XX
@@ -118,10 +698,6 @@ config SOC_QCA955X
@@ -118,10 +707,6 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
@ -741,7 +751,7 @@
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -132,7 +708,14 @@ config ATH79_DEV_DSA
@@ -132,7 +717,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -757,7 +767,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP
@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
@ -767,7 +777,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@ -837,6 +847,7 @@
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
+
--- a/arch/mips/ath79/prom.c

View file

@ -10,7 +10,7 @@
ATH79_MACH_EAP7660D, /* Senao EAP7660D */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1
@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1
select ATH79_DEV_M25P80
select ATH79_DEV_USB

View file

@ -10,7 +10,7 @@
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2
@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View file

@ -10,7 +10,7 @@
ATH79_MACH_RW2458N, /* Redwave RW2458N */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -360,6 +360,16 @@ config ATH79_MACH_RB750
@@ -369,6 +369,16 @@ config ATH79_MACH_RB750
select ATH79_ROUTERBOOT
select RLE_DECOMPRESS