ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config

SVN-Revision: 26779
This commit is contained in:
Felix Fietkau 2011-04-28 21:27:42 +00:00
parent eb270c4d33
commit cbc75a9c70
3 changed files with 37 additions and 8 deletions

View file

@ -0,0 +1,31 @@
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option ifname eth0.1
option type bridge
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
config interface wan
option ifname eth0.2
option proto dhcp
config switch
option name eth0
option reset 1
option enable_vlan 1
config switch_vlan
option device eth0
option vlan 1
option ports "0t 1 3 4 5"
config switch_vlan
option device eth0
option vlan 2
option ports "0t 2"

View file

@ -61,6 +61,9 @@ ar71xx_board_name() {
*PB44)
name="pb44"
;;
*PB92)
name="pb92"
;;
*"RouterBOARD 411/A/AH")
name="rb-411"
;;

View file

@ -86,19 +86,14 @@ static void __init pb92_init(void)
ar71xx_add_device_m25p80(&pb92_flash_data);
ar71xx_add_device_mdio(~0);
ar71xx_add_device_mdio(~BIT(0));
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(0);
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
ARRAY_SIZE(pb92_gpio_keys),