openwrtv4

Author	SHA1	Message	Date
Felix Fietkau	18c588a570	ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36530	2013-05-03 09:12:19 +00:00
Felix Fietkau	30c4360345	kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36529	2013-05-02 15:59:57 +00:00
Jonas Gorski	24636fcabf	bcm63xx: split into two subtargets, generic and SMP Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527	2013-05-02 15:28:31 +00:00
Jonas Gorski	d11efa1428	bcm63xx: add SMP support for BCM6362 and BCM6368 BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36526	2013-05-02 15:28:26 +00:00
Jonas Gorski	8f15326acc	kernel: generic: don't strip /proc/irq on SMP /proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36525	2013-05-02 15:28:12 +00:00
Jonas Gorski	a80a4f3ec2	bcm63xx: fix hsspi flash registration for BCM6362 Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36524	2013-05-02 15:28:10 +00:00
Jonas Gorski	999a956f4c	bcm63xx: fix/enable livebox minipci Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36523	2013-05-02 15:28:07 +00:00
Jo-Philipp Wich	6ac2b3b76a	atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. SVN-Revision: 36513	2013-05-02 11:46:53 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Florian Fainelli	db02b0e4ee	brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36506	2013-05-01 21:52:25 +00:00
Florian Fainelli	292368409e	brcm63xx: add missing binary operands to BCM6345 ethernet patch Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36505	2013-05-01 21:12:40 +00:00
Florian Fainelli	6f48ccea02	brcm63xx: remove 3.7 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36504	2013-05-01 21:12:26 +00:00
Gabor Juhos	0ae43dbe9d	ar71xx: rename WNR2000v3 support patch Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36498	2013-04-30 10:44:11 +00:00
Gabor Juhos	d557a51a40	x86/geos: switch to 3.8.10 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36496	2013-04-30 10:44:09 +00:00
Gabor Juhos	0fa71ca3e5	linux/3.9: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36495	2013-04-30 10:44:08 +00:00
Gabor Juhos	41445b41cc	linux/3.8: use backported pcibios_get_phb_of_node patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36494	2013-04-30 10:44:07 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
Gabor Juhos	8e466dcdf4	at91: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36492	2013-04-30 10:43:58 +00:00
Gabor Juhos	d35545f3d7	linux/3.{8,9}: add missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36491	2013-04-30 10:43:57 +00:00
Gabor Juhos	25c45c0d53	linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36490	2013-04-30 10:43:56 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Hauke Mehrtens	ca7f9638d5	broadcom-diag: support for the WNDR3700v3 I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482	2013-04-28 21:11:17 +00:00
Hauke Mehrtens	7dee0dae35	brcm47xx: use kernel 3.8.10 as default kernel The biggest change with this kernel is a new partition parser. SVN-Revision: 36480	2013-04-28 18:25:16 +00:00
Hauke Mehrtens	00a7ace7cf	brcm47xx: add board detection for NETGEAR WNDR4500 V2 SVN-Revision: 36478	2013-04-28 18:19:31 +00:00
Hauke Mehrtens	e7e4afbb64	kernel: fix a memory leak in split_rootfs_data() allocate_partition() copies all the content of dpart into a new struct. SVN-Revision: 36475	2013-04-28 17:01:56 +00:00
Hauke Mehrtens	1bac172c44	kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. SVN-Revision: 36473	2013-04-28 16:52:11 +00:00
Jonas Gorski	ad1d3f00cb	kernel: update linux 3.9 patches to rc8 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36469	2013-04-28 11:55:23 +00:00
Jonas Gorski	a33dd13c98	kernel: add missing bcma defines and header file for bcrmfmac Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36468	2013-04-28 11:10:42 +00:00
Gabor Juhos	7c2632fbc5	ar71xx: add user-space support for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36461	2013-04-26 17:00:54 +00:00
Gabor Juhos	b29b7b65ea	ar71xx: add profile and build image for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36460	2013-04-26 17:00:53 +00:00
Gabor Juhos	9b3c0d11a2	ar71xx: Add Netgear WNR2000v3 support Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36459	2013-04-26 17:00:52 +00:00
Gabor Juhos	183e2af1c7	ar71xx: add profile and build image for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36458	2013-04-26 17:00:50 +00:00
Gabor Juhos	7c4e2c1f72	ar71xx: add user-space support for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36457	2013-04-26 17:00:49 +00:00
Gabor Juhos	5c11773f8a	ar71xx: add kernel support for TPLINK WR720N v3 Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36456	2013-04-26 17:00:48 +00:00
Gabor Juhos	c0691e29f1	mpc85xx: Add subtargets Generic and P1020 Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36454	2013-04-26 16:57:43 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	988ae9cbf8	at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452	2013-04-26 16:55:40 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	b42a173664	lantiq: make leds and network work on VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36445	2013-04-25 19:03:41 +00:00
John Crispin	520bf46375	lantiq: fix board detection helpers Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36444	2013-04-25 19:03:37 +00:00
John Crispin	157c86371f	lantiq: move dts files to thir own folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36443	2013-04-25 19:03:32 +00:00
John Crispin	4664e21293	generic: fix rtl8366_smi compile warning drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36442	2013-04-25 19:03:29 +00:00
John Crispin	9ae3adbe3c	lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36441	2013-04-25 19:03:25 +00:00
John Crispin	d3d18ae812	lantiq: make lzma-loader based images for VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36440	2013-04-25 19:03:21 +00:00
John Crispin	a46acc80e4	lantiq: update VG3503J.dts to match new partition layout Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36439	2013-04-25 19:03:17 +00:00
John Crispin	46306c2e47	lantiq: add lzma-loader source Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36438	2013-04-25 19:03:13 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
John Crispin	831c7ea04f	preinit: move cmdline failsafe= handling ot the generic code Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36430	2013-04-25 19:02:37 +00:00
Jonas Gorski	90986b5581	bcm63xx: update patches with upstream submissions SVN-Revision: 36407	2013-04-23 13:55:36 +00:00
Jonas Gorski	2a1a16d2d5	bcm63xx: switch to linux 3.8 SVN-Revision: 36406	2013-04-23 13:55:17 +00:00
Steven Barth	4e8f7f37ed	Change default IPv6 config to enable DHCPv6-PD SVN-Revision: 36384	2013-04-22 19:40:16 +00:00
Felix Fietkau	a8a01b42ae	kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL SVN-Revision: 36378	2013-04-22 15:01:36 +00:00
Felix Fietkau	cd35ea2174	ar71xx: merge more unaligned access hacks from cerowrt-next Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36374	2013-04-22 12:53:21 +00:00
Felix Fietkau	f58dcb59c6	kernel: backport SSB/BCMA changes in preparation for a compat-wireless update Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36367	2013-04-19 12:39:40 +00:00
Gabor Juhos	f03960723a	linux/3.9: add missing config symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36365	2013-04-19 08:07:38 +00:00
Gabor Juhos	e07848664c	linux/3.[89]: update bridge_remove_ipv6_dependency patch Fixes the following warning: CC [M] net/ipv6/addrconf.o net/ipv6/addrconf.c: In function 'addrconf_init': net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36364	2013-04-19 08:07:37 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
Felix Fietkau	96bb7c123b	build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351	2013-04-17 15:36:41 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Felix Fietkau	a662200205	kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360 ) SVN-Revision: 36342	2013-04-15 20:40:29 +00:00
Imre Kaloz	57b68daee9	refresh against -rc7 SVN-Revision: 36340	2013-04-15 16:10:01 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
Gabor Juhos	68c54dc34f	mpc85xx: use static SPI bus number for TL-WDR4900 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36329	2013-04-12 19:44:41 +00:00
Gabor Juhos	54635e7f78	linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36328	2013-04-12 19:44:38 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	10f432ba9d	fix rtl8366s OF binding Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36323	2013-04-12 18:56:05 +00:00
Gabor Juhos	687b3f04ce	mpc85xx: set preinit interface to eth0 by default This makes the WDR4900 accessible via ethernet in failsafe mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36322	2013-04-12 18:30:25 +00:00
Gabor Juhos	40e15b1fbf	mpc85xx: Generate fdt for P1020RDB Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36321	2013-04-12 18:30:24 +00:00
Gabor Juhos	f43bdf34cd	mpc85xx: Add P1020RDB board support Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36320	2013-04-12 18:30:22 +00:00
John Crispin	d5f87e193c	add VG3503J support this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36315	2013-04-11 19:18:07 +00:00
John Crispin	fbc1e3732b	add FE phy firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36314	2013-04-11 19:17:48 +00:00
John Crispin	0d32469457	add missing pinmux patch Fix lantiq pinmux which affected PCI and USB. Known affected boards are: ARV4518 and ARV7518. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36312	2013-04-11 07:12:37 +00:00
Felix Fietkau	6436b3f736	cns3xxx: fix USB ehci/ohci platform driver Update ehci/ohci driver registration to conform to the new platform drivers. This fixes missing USB host support in 3.8.x Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 36309	2013-04-10 16:20:50 +00:00
Felix Fietkau	edd8048107	kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base Fixes booting on single-core CNS3xxx devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36308	2013-04-10 16:07:50 +00:00
Felix Fietkau	06733c2650	kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36307	2013-04-10 13:45:12 +00:00
Felix Fietkau	7fa2957103	kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36304	2013-04-10 13:11:29 +00:00
Felix Fietkau	df3d4690bd	kernel: keep dropped stats in fq_codel Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36303	2013-04-10 13:11:25 +00:00
Felix Fietkau	ec3a8846fc	kernel: tune fq_codel defaults for common netdevice speeds Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36302	2013-04-10 13:11:21 +00:00
Felix Fietkau	307965026a	kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36301	2013-04-10 13:11:16 +00:00
Florian Fainelli	915969ff2c	kernel: refresh patches against 3.9-rc6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36297	2013-04-09 16:16:20 +00:00
Florian Fainelli	c3366cd164	kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36296	2013-04-09 16:16:16 +00:00
Florian Fainelli	518d6a9273	kernel: backport switch user API changes after r36283 3.3 and 3.6 kernels do not make use of the UAPI headers, still they need to provide an up-to-date switch.h copy for swconfig to build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36295	2013-04-09 15:47:01 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide\|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
John Crispin	fff58a5801	allow loading port maps from OF Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283	2013-04-09 14:19:09 +00:00
Steven Barth	ea94d66b0f	Adapt default network configuration for IPv6 SVN-Revision: 36278	2013-04-09 08:03:08 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	9e6ae6ab5d	x86/generic: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36256	2013-04-07 15:53:17 +00:00
Gabor Juhos	0d0bfe3d41	x86/generic: switch to 3.8 Only tested within a VM. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36255	2013-04-07 15:53:15 +00:00
Gabor Juhos	f5d28ea3ce	x86/generic: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36254	2013-04-07 15:53:13 +00:00
Gabor Juhos	71a51e3b91	x86/alix2: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36253	2013-04-07 15:53:11 +00:00
Gabor Juhos	15d311ec18	x86/alix2: switch to 3.8 Tested on an alix2d13 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36252	2013-04-07 15:53:09 +00:00
Gabor Juhos	9d05b1b683	x86/alix2: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36251	2013-04-07 15:53:08 +00:00
Gabor Juhos	89f690843f	x86: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36250	2013-04-07 15:53:05 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Felix Fietkau	fde143b66f	cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36241	2013-04-07 11:24:30 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Hauke Mehrtens	4a46687d25	brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235	2013-04-06 22:22:26 +00:00
Hauke Mehrtens	204bde8d98	brcm47xx: fix error in board detection when nvram is not available. SVN-Revision: 36234	2013-04-06 19:02:25 +00:00
Gabor Juhos	d45ef216e6	linux/3.8: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36233	2013-04-06 17:33:03 +00:00
Gabor Juhos	51fa28e2c2	linux/3.8: backport devm_ioremap_resource from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36232	2013-04-06 17:33:00 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	747b795b56	generic: rtl8367: add compatible string with vendor prefix Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36230	2013-04-06 17:19:31 +00:00
Gabor Juhos	f5d8d80ca9	generic: rtl8367b: fix rtl8367b_extif_init_of * disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36229	2013-04-06 17:03:09 +00:00
Gabor Juhos	32d3b456f0	linux/3.8: add more missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36228	2013-04-06 16:56:47 +00:00
Gabor Juhos	89539462a8	linux/3.8: add missing symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36226	2013-04-06 16:38:36 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	38bd9b4337	generic: rtl8367: allow to load extif config from OF Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36220	2013-04-06 12:37:36 +00:00
Gabor Juhos	585d19d168	generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36219	2013-04-06 12:37:34 +00:00
Gabor Juhos	68c931c637	generic: rtl8367: add vendor prefix to the compatible string Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36218	2013-04-06 12:37:32 +00:00
Gabor Juhos	348640f4b3	ramips: rt3883: sync 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36217	2013-04-06 12:37:31 +00:00
John Crispin	d16de0b69f	fix typo pinmmux -> pinmux Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36216	2013-04-06 11:46:34 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
Gabor Juhos	202fb45deb	refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36214	2013-04-06 11:40:41 +00:00
John Crispin	df7af06f1f	fix dir-615 h1 network config http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> SVN-Revision: 36213	2013-04-05 23:37:45 +00:00
John Crispin	e1a74d8ff7	fix typo that made gpiomuxing fail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36212	2013-04-05 23:10:42 +00:00
Florian Fainelli	495296bba9	malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211	2013-04-05 12:36:48 +00:00
Florian Fainelli	12b925dcbf	malta: move 32-bits options to subtarget config Preliminary change to add support for MIPS64-based malta subtargets. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36210	2013-04-05 12:36:45 +00:00
Florian Fainelli	5eb8ba7f19	malta: move endianness kernel configuration to subtarget Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36209	2013-04-05 12:36:41 +00:00
Florian Fainelli	46dfa04a08	malta: enable mips16 feature flag The malta platform supports mips16 advertise this feature flag. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36203	2013-04-05 12:36:16 +00:00
John Crispin	d9bb7ff7a5	Migrate lantiq platform to common led helper functions http://patchwork.openwrt.org/patch/3316/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36187	2013-04-03 10:01:07 +00:00
John Crispin	a4c745ee74	add a missing patch that makes board detection work again Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36186	2013-04-03 10:01:03 +00:00
John Crispin	c838ec2391	Patch for invoking (pre)init http://patchwork.openwrt.org/patch/3485/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36183	2013-04-03 10:00:50 +00:00
John Crispin	93899a1329	add profile for tenda w150m board http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176	2013-04-03 10:00:21 +00:00
John Crispin	7e54357bd5	fix ALL5002 default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36175	2013-04-03 10:00:16 +00:00
John Crispin	37401dca92	Build WW factory image for DAP-1350 http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174	2013-04-03 10:00:12 +00:00
John Crispin	910b705155	add Huawei D105 http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173	2013-04-03 10:00:08 +00:00
John Crispin	c1710901c5	add profile for the Edimax 3g-6200NL board http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172	2013-04-03 10:00:03 +00:00
John Crispin	f3643374c4	there is no ttyS1 console Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36171	2013-04-03 09:59:59 +00:00
John Crispin	99e0ff1123	make v3.8 the default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36170	2013-04-03 09:59:55 +00:00
John Crispin	c8d5f5e0ef	add new image/Makefile Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169	2013-04-03 09:59:51 +00:00
John Crispin	770b28f146	add the dts files that describe the boards in future Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36168	2013-04-03 09:59:46 +00:00
John Crispin	2328e8389e	fix upvel profile names Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36167	2013-04-03 09:59:41 +00:00
John Crispin	94972a5268	fix rt3883 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36166	2013-04-03 09:59:37 +00:00
John Crispin	0716ae8abe	fix rt305x config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36165	2013-04-03 09:59:33 +00:00
John Crispin	dce4945972	mark rt288x broken until the test hardware arrives in the mail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36164	2013-04-03 09:59:16 +00:00
John Crispin	46f141637c	add patches for v3.8 Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36163	2013-04-03 09:59:10 +00:00
John Crispin	4f86ea43ca	remove old ralink 3.8 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36162	2013-04-03 09:58:48 +00:00
John Crispin	d4db00205d	move files to files-3.7 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161	2013-04-03 09:58:44 +00:00
John Crispin	86a691144b	add feature gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36160	2013-04-03 09:58:37 +00:00
John Crispin	1105bd2897	add OF support to rtl8367b driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36159	2013-04-03 09:58:33 +00:00
John Crispin	cc34858d4a	make firmware loading work on v3.9 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36158	2013-04-03 09:58:28 +00:00
Felix Fietkau	72f5901eb1	mpc85xx: enable ath9k and wpad-mini by default SVN-Revision: 36142	2013-04-01 09:53:29 +00:00
Hauke Mehrtens	98ef9e5411	brcm47xx: generate images for Linksys E.... models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36139	2013-03-27 15:51:28 +00:00
Hauke Mehrtens	b4eabad019	gemini: remove usage of ehci_port_power() it was removed in kernel 3.8 SVN-Revision: 36138	2013-03-27 15:48:07 +00:00
Hauke Mehrtens	31c9452120	brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. SVN-Revision: 36137	2013-03-27 15:35:52 +00:00
Hauke Mehrtens	a9e5a178ef	brcm47xx: generate images for more WRT...N models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36136	2013-03-27 15:34:55 +00:00
Imre Kaloz	b92e750027	upgrade to 3.9-rc4, disable unsupported boards SVN-Revision: 36128	2013-03-25 14:18:32 +00:00
Imre Kaloz	c90078ce87	refresh patches against -rc4 SVN-Revision: 36127	2013-03-25 13:53:48 +00:00
Imre Kaloz	f26378fd7c	add missing symbols SVN-Revision: 36126	2013-03-25 13:53:17 +00:00
Gabor Juhos	f7da2127ab	ar71xx: fix ethernet LEDs on the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36122	2013-03-25 06:40:03 +00:00
Gabor Juhos	39c132d154	ar71xx: add GPIO output select values for AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36121	2013-03-25 06:40:00 +00:00
Gabor Juhos	849201b1d8	ar71xx: add default LED configuration for the WL-WRD3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36120	2013-03-24 21:07:21 +00:00
Gabor Juhos	cd5cca4ba8	ar71xx: fix USB power GPIO on the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36119	2013-03-24 19:23:47 +00:00
Gabor Juhos	4daefc9480	ar71xx: remove numeric suffix of the TL-WDR3500 USB LED Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36118	2013-03-24 19:23:45 +00:00
Gabor Juhos	a4a2a7189f	ar71xx: add diag support for the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36117	2013-03-24 19:23:43 +00:00
Gabor Juhos	38c991311b	ar71xx: add default switch configuration for the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36116	2013-03-24 19:23:36 +00:00
Hauke Mehrtens	bb81e695f9	kernel: add missing config options for au1000 target SVN-Revision: 36115	2013-03-24 14:01:38 +00:00
Hauke Mehrtens	18c47be19a	kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option. SVN-Revision: 36102	2013-03-21 14:56:04 +00:00
Hauke Mehrtens	4995f23669	kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected This was turned from a silent confg option without a text to a normal config option which could be selected without any other option depending on this. This could cause the situation where REGMAP_SPI was selected without SPI_MASTER being selected. SVN-Revision: 36101	2013-03-21 14:50:59 +00:00
Hauke Mehrtens	d5cf67297a	brcm47xx: generate images for some more devices These devices should be supported by trunk now. SVN-Revision: 36099	2013-03-20 22:01:18 +00:00
Hauke Mehrtens	c9544f4af0	kernel: add some fixes for kernel 3.9 This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages. SVN-Revision: 36098	2013-03-20 21:59:24 +00:00
Hauke Mehrtens	99638c5288	kernel: add some missing config options for kernel 3.9 SVN-Revision: 36097	2013-03-20 21:53:51 +00:00
Florian Fainelli	b1cc7a90a4	kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193 ) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36091	2013-03-19 14:13:39 +00:00
Florian Fainelli	fe157ea1ba	uml: remove 3.6 kernel patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36080	2013-03-17 19:47:04 +00:00
Florian Fainelli	1898218119	uml: remove 3.3. kernel patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36079	2013-03-17 19:46:59 +00:00
Florian Fainelli	c36db5f66a	uml: switch to 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36078	2013-03-17 19:46:54 +00:00
Florian Fainelli	a987d1aaa3	uml: add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36077	2013-03-17 19:46:49 +00:00
Florian Fainelli	499f92c3db	uml: remove 3.2 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36076	2013-03-17 19:46:43 +00:00
Florian Fainelli	ce33aaafcf	ep93xx: switch to 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36075	2013-03-17 19:46:37 +00:00
Florian Fainelli	a5551d366a	kernel: refresh 3.9 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36074	2013-03-17 19:46:32 +00:00
Florian Fainelli	472bb8d51a	ep93xx: add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36073	2013-03-17 19:46:25 +00:00
Florian Fainelli	743e9e7009	ep93xx: account for sound soc directory rename in 3.7 sound/soc/ep93xx -> sound/soc/cirrus Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36071	2013-03-17 19:45:55 +00:00
Florian Fainelli	6a7100c760	kernel: set regmap-core module license Fixes the following issues: [ 7.660000] regmap_core: module license 'unspecified' taints kernel [ 7.690000] Disabling lock debugging due to kernel [ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0 [ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0 [ 7.720000] regmap_core: Unknown symbol devres_add (err 0 [ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0 [ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0 [ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0 [ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0 [ 7.780000] regmap_core: Unknown symbol devres_free (err 0 [ 7.800000] regmap_core: Unknown symbol devres_find (err 0 [ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36070	2013-03-17 19:45:48 +00:00
Florian Fainelli	7987c8d0dc	au1000: remove support for 3.3. kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36067	2013-03-17 14:33:47 +00:00
Florian Fainelli	c56c18168e	au1000: switch to 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36066	2013-03-17 14:33:41 +00:00
Florian Fainelli	5592a619d0	au1000: keep the MTX-1 watchdog pin low during boot Do this until the watchdog driver is loaded and the user-space watchdog daemon can start pinging the watchdog. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36065	2013-03-17 14:33:36 +00:00
Florian Fainelli	d5c2e83fa5	ep93xx: remove 3.3 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36064	2013-03-17 14:33:23 +00:00
Florian Fainelli	9cef30a519	mcs814x: use devm_request_and_ioremap in mcs814x-rng driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36063	2013-03-17 14:33:18 +00:00
Florian Fainelli	8ed2299646	mcs814x: use devm_request_and_ioremap helper for nuport_mac driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36062	2013-03-17 14:33:13 +00:00
Florian Fainelli	8bc84bac31	mcs814x: remove PCI code None of the boards we support are using it nor have it wired out of the SoC, just remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36061	2013-03-17 14:33:07 +00:00
Florian Fainelli	a9ef927cce	mcs814x: implement MULTI_IRQ_HANDLER Allows us to get rid of the IRQ entry point assembly Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36060	2013-03-16 22:25:47 +00:00
Florian Fainelli	18908139f3	mcs814x: use the standard device tree binding to represent a PHY node Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36059	2013-03-16 22:25:41 +00:00
Gabor Juhos	1996cfe9dd	mpc85xx: add profile and build image for the TL-WDR4900 v1 board Now that the ethernet switch is working, create firmware images to make impatient users happy. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36051	2013-03-15 16:11:45 +00:00
Gabor Juhos	72253b9073	generic: ar8216: start AR8327 switch from the probe routine The AR8327 switch gets its configuration from platform data or from the device-tree. This allows to start it from the probe routine. Doing so makes it usable with ethernet drivers which only connects to the PHY device when the ethernet interface is opened. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36050	2013-03-15 16:06:28 +00:00
Gabor Juhos	5503686f69	generic: ar8216: add ar8xxx_start helper Move switch starting code into a separate function. This makes it usable from other places. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36049	2013-03-15 16:06:25 +00:00
Gabor Juhos	44ce8dac88	mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36048	2013-03-15 15:53:06 +00:00
Gabor Juhos	7ba6a8d8e8	generic: ar8216: add OF configuration support for AR8327 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36047	2013-03-15 15:50:08 +00:00
Gabor Juhos	ee12b1b7d5	generic: ar8216: separate platform_data based AR8327 code Move platform_data specific configuration code into a separate routine. Do it in preparation for the upcoming OF support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36046	2013-03-15 15:50:05 +00:00
Gabor Juhos	d88f66ae21	generic: ar8216: don't use platform_data in ar8327_init_port Fetch the PORT_STATUS values in ar8327_hw_init and store those in a private data stucture for later use. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36045	2013-03-15 15:50:02 +00:00
Gabor Juhos	9d3f70d503	generic: ar8216: move the ar8327_get_port_init_status function It will be used in ar8327_probe routine. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36044	2013-03-15 15:50:00 +00:00
Gabor Juhos	17d735fc46	generic: ar8216: simplify and rename ar8327_config_port Return with the PORT_STATUS register value instead of writing that directly into the corresponding register. Also rename the function to ar8327_get_port_init_status. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36043	2013-03-15 15:49:57 +00:00
Gabor Juhos	3fee1bddbe	generic: ar8216: remove superfluous pdata checks The presence of the platform data is already verified in ar8327_hw_init, and the driver does not start without that anyway. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36042	2013-03-15 15:49:55 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
Gabor Juhos	d614f8a880	ar71xx: build images for the TL-MR11U v2 [juhosg: use different profile name for v1 and v2, and add multi profile to build for both versions] Signed-off-by: Guilhem Lettron <guilhem@lettron.fr> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36038	2013-03-15 14:35:52 +00:00
Gabor Juhos	35d41db979	ar71xx: rw2458n - Use eeprom (art) from wifi card Use eeprom (art) from included wifi card, not hard coded in flash. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36037	2013-03-15 14:35:50 +00:00
Gabor Juhos	8deffcba7e	ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration Error in using another MDIO (AP123 platform using only one GE1 device for eth0 and eth1) for the router mr3420v2. ?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779 Routers in this sense are the same and the only difference is: USB port, USB led, instead of the GPIO-switch we have GPIO-button. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36036	2013-03-15 14:35:48 +00:00
John Crispin	4d5860cdd6	ACMP252: fix USB-enable GPIO and use default PCI configuration for now EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 36030	2013-03-14 18:43:54 +00:00
John Crispin	0dbe4f502d	fix buttons on vr9 eval kit Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36029	2013-03-14 18:43:49 +00:00
John Crispin	9b4a8c6d1e	select vdsl packages on vr9 boards Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36028	2013-03-14 18:43:44 +00:00
John Crispin	0f7f1f3347	fix fritzbox 3370 partitions/memory/cmdline Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36027	2013-03-14 18:43:39 +00:00
John Crispin	5452dbad61	build jffs images for nand based fritzbox Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36026	2013-03-14 18:43:34 +00:00
John Crispin	b98ae2b149	bump to v3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36014	2013-03-14 18:42:29 +00:00
John Crispin	3ab75692f3	move GPHY FW blobs to non versioned folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36013	2013-03-14 18:42:21 +00:00
Florian Fainelli	b2e63b8ea8	kernel: add support for 3.9-rc2 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36008	2013-03-14 14:45:56 +00:00
John Crispin	1360067c4a	update the /init file to start /sbin/init Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36002	2013-03-13 18:11:13 +00:00
John Crispin	043d56b646	make sure the console works when using procd as our pid 1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36000	2013-03-13 18:11:00 +00:00
Gabor Juhos	f0f72ce262	gemini: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35995	2013-03-12 18:22:34 +00:00
Gabor Juhos	04f2ef9e66	gemini: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35994	2013-03-12 18:22:33 +00:00
Gabor Juhos	54b9b4d8a5	gemini: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35993	2013-03-12 18:22:22 +00:00
John Crispin	48a4b3a0cd	fixes NO_XIP on CFI0001 flash This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 35992	2013-03-12 13:53:08 +00:00
John Crispin	e3a6ea65e1	add support for AudioCodes AC-252 user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35990	2013-03-12 13:52:54 +00:00
John Crispin	0b881eea72	unbreak dgn3500 spi-gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35989	2013-03-12 13:52:47 +00:00
John Crispin	b22cbac68f	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35988	2013-03-12 13:52:40 +00:00
John Crispin	fad5f5700e	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35987	2013-03-12 13:52:33 +00:00
Gabor Juhos	76934b6779	avr32: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35985	2013-03-12 13:28:33 +00:00
Gabor Juhos	a71b9f5d04	avr32: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35984	2013-03-12 13:28:32 +00:00
Gabor Juhos	19b2c06b09	avr32: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35983	2013-03-12 13:28:31 +00:00
Gabor Juhos	f04cccb842	avr32: add sysupgrade support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35982	2013-03-12 13:28:27 +00:00
Gabor Juhos	6c3dd84897	avr32: add firmware partition Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35981	2013-03-12 13:28:23 +00:00
Gabor Juhos	cb9fad715c	avr32: add diag support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35980	2013-03-12 13:28:21 +00:00
Gabor Juhos	de0d19ac3d	avr32: create network config dynamically The default network configuration from base-files is not correct for the NGW100 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35979	2013-03-12 13:28:19 +00:00
Gabor Juhos	73caeba522	avr32: built the firmware images from the lzma compressed uImage Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35978	2013-03-12 13:28:16 +00:00
Gabor Juhos	12a213227e	mpc52xx: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35977	2013-03-12 07:18:37 +00:00
Gabor Juhos	1ed39da53d	mpc52xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35976	2013-03-12 07:18:36 +00:00
Gabor Juhos	ae0af74654	mpc52xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35975	2013-03-12 07:18:34 +00:00
Gabor Juhos	fe3df4b593	ramips: add profile and build image for the Upvel UR-326N4G board Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972	2013-03-11 21:02:45 +00:00
Gabor Juhos	d543f4b771	ramips: add user-space support for the Upvel UR-326N4G board [juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35971	2013-03-11 21:02:43 +00:00
Gabor Juhos	3c2ef04a0e	ramips: add kernel support for the Upvel UR-326N4G board [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970	2013-03-11 21:02:40 +00:00
Gabor Juhos	14ca5fc98b	ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35966	2013-03-11 19:52:54 +00:00
Gabor Juhos	72fc0c1906	ar71xx: add AR934X_GPIO_FUNC_* defines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35965	2013-03-11 19:52:51 +00:00
Gabor Juhos	44cc1507e9	ar71xx: makefile changes to build image for MR3420v2 Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3440/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35964	2013-03-11 15:55:25 +00:00
Gabor Juhos	2998abab7c	ar71xx: add user-space support for MR3420v2 Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3442/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35962	2013-03-11 15:55:22 +00:00
Gabor Juhos	902dd27383	ar71xx: add kernel support for MR3420v2 [juhosg: use gpio_request_one to enable the USB power] Patch-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@opewrt.org> SVN-Revision: 35961	2013-03-11 15:55:20 +00:00
Gabor Juhos	5c5e1c0a9d	ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U LAN1 and LAN2 LEDs not present (it pulled to ground via resistors) on MR3040 and MR11U devices. This little patch enabling ability to control GPIO14 and GPIO15. Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3439/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35960	2013-03-11 15:55:19 +00:00
Gabor Juhos	257bfc21af	ar71xx: add profile support for dir-835-a1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35959	2013-03-11 15:55:17 +00:00
Gabor Juhos	3fa3cbae7c	ar71xx: add user space support for dir-835-a1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35958	2013-03-11 15:55:15 +00:00
Gabor Juhos	a7525f5f5d	ar71xx: add kernel support for dir-835-a1 [juhosg: - remove custom mdio bus info and platform data for ar8327, clear the .led_cfg field from dir835a1_setup instead, - remove arguments of dir835c1_generic_setup function, register the LEDs directly from the board specific setup instead] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35957	2013-03-11 15:55:13 +00:00
Felix Fietkau	bd6c9d6252	cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure SVN-Revision: 35953	2013-03-11 02:29:53 +00:00
Felix Fietkau	d7a529709a	cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler SVN-Revision: 35952	2013-03-11 02:29:47 +00:00
Felix Fietkau	0d13baff1e	cns3xxx: increase number of ethernet driver rx buffers SVN-Revision: 35951	2013-03-10 21:59:32 +00:00
Felix Fietkau	ee2b511e1f	cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries SVN-Revision: 35950	2013-03-10 21:59:28 +00:00
Felix Fietkau	d22ac8d8fb	cns3xxx: minor ethernet driver cleanup SVN-Revision: 35949	2013-03-10 21:59:21 +00:00
Hauke Mehrtens	e1f24d99e1	brcm47xx: refresh config SVN-Revision: 35948	2013-03-10 20:42:26 +00:00
Hauke Mehrtens	89d4fceee2	xburst: fix compilation: remove the __dev attributes SVN-Revision: 35946	2013-03-10 20:26:28 +00:00
Hauke Mehrtens	45b24fa771	kernel: add some missing config options found by the buildbot. SVN-Revision: 35945	2013-03-10 20:25:19 +00:00
Felix Fietkau	9facda9570	cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers SVN-Revision: 35943	2013-03-10 18:25:20 +00:00
Felix Fietkau	c44506fcbd	cns3xxx: fix an rx irq handling corner case When an rx interrupt comes in, rx interrupts are disabled and NAPI polling is scheduled. During the NAPI poll, the driver first processes received frames in the ring, then fills the dma descriptor slots with new buffers and calls tx complete, before finally re-enabling rx interrupts and completing NAPI (if below the budget). If the hardware rx queue overflows before the napi complete is called, the hardware will not throw any further rx interrupts and rx processing stops completely. Fix this by keeping NAPI polling scheduled until it completes a poll without receiving any packets, and also handle NAPI completion before refilling rx or completing tx. SVN-Revision: 35942	2013-03-10 18:25:16 +00:00
Felix Fietkau	c1adc79328	cns3xxx: fix ethernet driver memory barrier usage SVN-Revision: 35941	2013-03-10 18:25:11 +00:00
Gabor Juhos	9a71711d39	realview: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35940	2013-03-10 18:06:31 +00:00
Gabor Juhos	35dd42f976	realview: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35939	2013-03-10 18:06:29 +00:00
Felix Fietkau	53e0f10246	kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm SVN-Revision: 35938	2013-03-10 17:04:36 +00:00
Felix Fietkau	2b83c9bd8a	kernel: ensure that the arm exception handlers get preserved SVN-Revision: 35937	2013-03-10 17:04:31 +00:00
Felix Fietkau	f0d7ba33ef	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors SVN-Revision: 35936	2013-03-10 14:51:42 +00:00
Gabor Juhos	5b3ab0e21e	xburst: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35934	2013-03-10 13:24:54 +00:00
Gabor Juhos	00caedf86e	xburst: switch to 3.8 Compile tested only, so add broken flag. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35933	2013-03-10 13:24:52 +00:00
Gabor Juhos	8942d4dc04	xburst: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35932	2013-03-10 13:24:50 +00:00
Gabor Juhos	15718f5387	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35931	2013-03-10 13:24:47 +00:00
Gabor Juhos	f25c050aa9	adm5120: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35930	2013-03-10 13:24:46 +00:00
Gabor Juhos	5502bbe2ca	adm5120: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35929	2013-03-10 13:24:45 +00:00
Gabor Juhos	c42da71d8b	malta: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35928	2013-03-10 13:24:44 +00:00
Gabor Juhos	6720fc6952	malta: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35927	2013-03-10 13:24:43 +00:00
Gabor Juhos	82dc64b19b	atheros: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35926	2013-03-10 13:24:42 +00:00
Gabor Juhos	5b8e106ae6	atheros: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35925	2013-03-10 13:24:40 +00:00
Gabor Juhos	ce5806378e	mpc83xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35924	2013-03-10 13:24:39 +00:00
Gabor Juhos	c79c132229	mpc83xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35923	2013-03-10 13:24:38 +00:00
Gabor Juhos	27ba973c06	rb532: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35922	2013-03-10 13:21:40 +00:00
Gabor Juhos	501e4d331d	rb532: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35921	2013-03-10 13:21:33 +00:00
Gabor Juhos	8223205a29	rb532: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35920	2013-03-10 13:21:29 +00:00
Gabor Juhos	e8a5312bef	ar71xx: correct board name to make LEDs work on RB750 Patch by: Denver A <denvera@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3419/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35919	2013-03-10 07:20:57 +00:00
Gabor Juhos	d85ffaabe9	ppc40x: remove __dev_{in,ex}it annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35918	2013-03-10 07:20:54 +00:00
Felix Fietkau	446409f43e	cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance SVN-Revision: 35917	2013-03-10 01:27:04 +00:00
Felix Fietkau	95431b7843	cns3xxx: remove linux 3.3 support SVN-Revision: 35916	2013-03-10 01:01:55 +00:00
Felix Fietkau	3d919b7c08	cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance) SVN-Revision: 35915	2013-03-10 01:01:51 +00:00
Hauke Mehrtens	44ed7d664a	brcm47xx: add some more partition parser fixes by Rafał Miłecki SVN-Revision: 35912	2013-03-09 19:48:03 +00:00
Hauke Mehrtens	694050a4cf	brcm47xx: netconfig: add bacis support for swconfig Parse the cpu port from swconfig and explicitly mark the cpu port as tagged. SVN-Revision: 35911	2013-03-09 19:24:43 +00:00
Felix Fietkau	72af5b4b35	kernel: add a missing config symbol for 3.8 SVN-Revision: 35910	2013-03-09 19:04:37 +00:00
Felix Fietkau	95f14d052a	cns3xxx: add linux 3.8 support and use it by default SVN-Revision: 35908	2013-03-09 18:51:46 +00:00
Felix Fietkau	85348d602e	kernel: fix mpcore watchdog symbol export SVN-Revision: 35907	2013-03-09 18:51:39 +00:00
Gabor Juhos	938361b055	cns21xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35886	2013-03-04 16:08:41 +00:00
Gabor Juhos	a61431b154	cns21xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35885	2013-03-04 16:08:39 +00:00
Gabor Juhos	3e3fc552bc	ppc44x: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35884	2013-03-04 15:16:37 +00:00
Gabor Juhos	d24041665c	ppc44x: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35883	2013-03-04 15:16:35 +00:00
Gabor Juhos	c67127ad23	ppc40x: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35882	2013-03-04 15:16:33 +00:00
Gabor Juhos	341b5ba939	ppc40x: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35881	2013-03-04 15:16:32 +00:00
Florian Fainelli	b412a81524	brcm63xx: fix LED names for various boards Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35880	2013-03-04 13:42:35 +00:00
Gabor Juhos	947bc9d36f	ar71xx: add backported watchdog patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35879	2013-03-04 12:08:28 +00:00
Gabor Juhos	1d55249d7c	ar71xx: use backported QCA955x patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35878	2013-03-04 11:48:15 +00:00
Gabor Juhos	64a9fe2894	ar71xx: use backported PCI patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35877	2013-03-04 11:48:08 +00:00
Gabor Juhos	12d49b5195	ar71xx: use backported MISC IRQ patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35876	2013-03-04 11:48:06 +00:00
Gabor Juhos	4c31b9f43e	ar71xx: use backported GPIO patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35875	2013-03-04 11:48:04 +00:00
Luka Perkov	120028af99	ar71xx: enable building ramdisk images for WZRHPG30XNH board types Signed-off-by: Luka Perkov <luka@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35874	2013-03-04 11:37:28 +00:00
Gabor Juhos	0ad50b0bec	ar71xx: use backported SPI patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35873	2013-03-04 09:40:44 +00:00
Gabor Juhos	c28cdfab31	mpc85xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35872	2013-03-04 09:37:25 +00:00
Gabor Juhos	84e960f7aa	mpc85xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35871	2013-03-04 09:37:24 +00:00
Gabor Juhos	3ee484d54c	ar71xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35870	2013-03-04 09:03:50 +00:00
Gabor Juhos	d5adb0dbdd	ar71xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35869	2013-03-04 08:47:38 +00:00
Gabor Juhos	a87a96da67	kernel: update linux 3.8 to 3.8.2 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35868	2013-03-04 08:43:55 +00:00
Luka Perkov	a5ebfc79ba	ar71xx: rework changes from r35840 Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35865	2013-03-03 21:59:34 +00:00
Gabor Juhos	26fbc15a86	kernel: update linux 3.8 to 3.8.1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35862	2013-03-03 13:58:52 +00:00
Gabor Juhos	da79a4c698	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35861	2013-03-03 13:58:10 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Gabor Juhos	4491da2bd4	ar71xx: update MAC address assignment for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35855	2013-03-03 12:47:37 +00:00
Gabor Juhos	200aa6db83	ar71xx: fixes leds for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35854	2013-03-03 12:47:33 +00:00
Gabor Juhos	8798c73860	ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension All known rt305x and rt3883 implementations support at least the 24kec instruction set which includes the DSP extension. For rt288x, the previous value mips32r2 is kept. The cpu target is now set per sub-archtecture, according to cpu-feature-overrides.h of each SoC family. [juhosg: define ARCH_PACKAGES variable for rt305x/rt3883 in order to differentiate the packages compiled with the 24Kec option.] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35853	2013-03-03 12:47:31 +00:00
Gabor Juhos	59ad675ef1	ramips: add user-space detection for ALL5002/ALL5003 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35852	2013-03-03 12:47:28 +00:00
Gabor Juhos	50e51e5ecc	ramips: indicate support for ALL5003 add ALL5003 to board description in mach-all5002.c adapt detection in user-space accordingly (no functional changes) Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35851	2013-03-03 12:47:25 +00:00
Gabor Juhos	367ab0a40f	ramips: enhance user-space board detection Similar to ar71xx, detect only once and cache the strings in /tmp/sysinfo/model and /tmp/sysinfo/boardname. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35850	2013-03-03 12:47:02 +00:00
Gabor Juhos	1ba2272ca5	ramips: fix whitespace in /lib/ramips.sh Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35849	2013-03-03 12:46:08 +00:00
Felix Fietkau	a9c584c277	Revert "[cns3xxx]: clean up PCI bus topology" (r35079) It breaks PCIe IRQ mapping and possibly other things SVN-Revision: 35842	2013-03-02 00:32:54 +00:00
Luka Perkov	107e0c6d1f	ar71xx: add support for Buffalo WZR 600DHP Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 35840	2013-03-01 13:46:01 +00:00
Hauke Mehrtens	04af8bd108	brcm47xx: bgmac: omit the fcs This fixes #13058 and hopefully #12927 SVN-Revision: 35834	2013-02-28 13:27:21 +00:00
Hauke Mehrtens	9805096f48	brcm47xx: bgmac: update to version form netdev git repository SVN-Revision: 35833	2013-02-28 13:24:39 +00:00
Gabor Juhos	5412b6f32e	ramips: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35801	2013-02-25 21:28:42 +00:00
Gabor Juhos	a08646642e	ramips: image: don't break make process if mkimage command fails Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35800	2013-02-25 21:28:40 +00:00
Gabor Juhos	275db5b4c4	ramips: remove port_power_off field from ehci_platform_data It is removed in 3.8. Also add a revert patch for 3.7. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35799	2013-02-25 21:28:38 +00:00
Gabor Juhos	5e1d6ce077	ramips: remove __dev_{init,exit} annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35798	2013-02-25 21:28:34 +00:00
Hauke Mehrtens	2c34e1aba5	brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver SVN-Revision: 35791	2013-02-25 20:56:37 +00:00
Hauke Mehrtens	5d3b728372	brcm47xx: board detection WNDR3400v2 WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#". CFE and NVRAM contain different vars - example: CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0 CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0 Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 (and on wikidevi for example) Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 35790	2013-02-25 20:55:46 +00:00
Gabor Juhos	f7879cd8d8	ar71xx: add profile and build image fot the TL-WA830RE v1 board Added support for the TP-LINK TL-WA830RE v1 Range Extender. Based on the WA901ND v1 support. Hardware IDs checked against original firmware. Patch was successfully tested on hardware. Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35789	2013-02-25 20:37:35 +00:00
Gabor Juhos	ea71239d8a	ar71xx: add model detection for the TL-WA830RE board Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35788	2013-02-25 20:37:33 +00:00
Hauke Mehrtens	0f2fc0adfd	brcm47xx: use same board detection code as kernel 3.8 SVN-Revision: 35770	2013-02-24 18:10:42 +00:00
Gabor Juhos	05de472518	adm5120: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35769	2013-02-24 18:08:14 +00:00
Gabor Juhos	3d65d0291c	adm5120: remove __dev{init,exit} annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35768	2013-02-24 18:08:03 +00:00
Gabor Juhos	0ab5ab2c08	adm5120: remove a superfluous patch The NO_IRQ symbol is not used by the amba core since upstream commit: dfb85185bda373a70409c70c2632b02fb0f8f449 AMBA: get rid of last two uses of NO_IRQ This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35748	2013-02-22 16:01:19 +00:00
Gabor Juhos	6419ffd20d	adm5120: avoid warning caused by wrong AMBA irq values The amba core throws a warning if -1 is used as an irq value since upstream commit: 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3 ARM: amba: make use of -1 IRQs warn Make the core warn about the use of -1 (NO_IRQ) Cange the value of the unused IRQs to zero for the UART devices to get rid of the warning. Based on #12729. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35747	2013-02-22 16:01:17 +00:00
Gabor Juhos	42cdd3bef4	cns21xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35737	2013-02-21 20:45:24 +00:00
Gabor Juhos	9ec9adf3ea	mpc83xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35736	2013-02-21 20:39:22 +00:00
Gabor Juhos	c50881d7ba	ppc44x: add support for 3.8 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35735	2013-02-21 19:23:31 +00:00
Gabor Juhos	fd645abca4	ppc40x: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35734	2013-02-21 19:23:29 +00:00
Gabor Juhos	4da13625d5	mpc85xx: add user-space support for the TL-WDR4900 v1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35733	2013-02-21 19:20:34 +00:00
Gabor Juhos	bd2c77b264	mpc85xx: update 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35732	2013-02-21 18:44:40 +00:00
Gabor Juhos	bcac3c5569	ar71xx: fix MAC address assignment on the DIR-825-Bx boards Use the same MAC addresses as the original firmware. Based on a patch from #10421. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Gabor Varga <vargagab@gmail.com> SVN-Revision: 35730	2013-02-21 17:58:21 +00:00
Gabor Juhos	d785803bfa	mpc85xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35729	2013-02-21 17:48:31 +00:00
Gabor Juhos	cf2324fd6b	ar71xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35728	2013-02-21 17:47:15 +00:00
Gabor Juhos	9cc3a60b5a	atheros: add support for linux kernel v3.8 This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35727	2013-02-21 17:45:54 +00:00
Gabor Juhos	babd5aa2fc	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35726	2013-02-21 16:52:34 +00:00
Jonas Gorski	ff20c0e1fc	bcm63xx: Fix sysupgrade for tag-version 7 and 8 Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724	2013-02-21 11:45:41 +00:00
Jonas Gorski	3010a0b616	generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723	2013-02-21 11:45:38 +00:00
Jonas Gorski	23e71c56ba	generic: b53: remove empty spaces Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722	2013-02-21 11:45:36 +00:00
Jonas Gorski	1cd62d06ca	ramips: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721	2013-02-21 11:45:33 +00:00
Jonas Gorski	a0956a88d4	cns21xx: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35720	2013-02-21 11:45:31 +00:00
Jonas Gorski	b91eab631b	ar71xx: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35719	2013-02-21 11:45:29 +00:00
Gabor Juhos	fad3fc1ad0	mpc85xx: add kmod-leds-gpio to the default packages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35708	2013-02-21 10:26:03 +00:00
Gabor Juhos	c837cae29c	mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35707	2013-02-21 10:26:00 +00:00
Hauke Mehrtens	9afdb046d3	brcm47xx: do not use vlan0 any more. The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704	2013-02-20 15:31:43 +00:00
Gabor Juhos	4305c6cda1	mpc85xx: add kernel support for the TL-WDR4900 v1 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35690	2013-02-20 08:27:27 +00:00
Gabor Juhos	33ba984628	mpc85xx: use a foreach loop to copy boot images Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35689	2013-02-20 08:27:26 +00:00
Gabor Juhos	4341b11f3e	ar71xx: remove __dev{init,exit} annotations from kernel files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35687	2013-02-19 20:52:06 +00:00
Gabor Juhos	7d0d29ab6e	linux/3.8: add missing Kconfig symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35686	2013-02-19 20:52:03 +00:00
Gabor Juhos	76b797c759	mpc85xx: add default profile Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35677	2013-02-19 14:53:17 +00:00
Gabor Juhos	debb9a4a97	mpc85xx: add gpio-keys to OF match table Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35676	2013-02-19 14:53:16 +00:00
Gabor Juhos	69cc70a43c	mpc85xx: enable squashfs feature Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35675	2013-02-19 14:53:15 +00:00
Gabor Juhos	ae9100e969	mpc85xx: add swconfig to default packages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35674	2013-02-19 14:53:12 +00:00
Gabor Juhos	ed0f43f1e2	kernel: update linux 3.8-rcX to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35672	2013-02-19 09:17:38 +00:00
Florian Fainelli	1dd9e661be	x86/rdc: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35664	2013-02-18 10:38:05 +00:00
Florian Fainelli	677714309b	rb532: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35663	2013-02-18 10:38:02 +00:00
Florian Fainelli	2bfa1ed82c	cobalt: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35662	2013-02-18 10:37:58 +00:00
Florian Fainelli	d7092aceb8	brcm63xx: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661	2013-02-18 10:37:55 +00:00
Florian Fainelli	5953e79888	au1000: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35660	2013-02-18 10:37:52 +00:00
Florian Fainelli	15b66e0cbe	ar7: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35659	2013-02-18 10:37:43 +00:00
Gabor Juhos	90011a99f3	ramips: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652	2013-02-18 09:56:29 +00:00
Gabor Juhos	32b41c4dd0	cns21xx: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35651	2013-02-18 09:56:28 +00:00
Gabor Juhos	f6691c09c1	ar71xx: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35650	2013-02-18 09:56:27 +00:00
Gabor Juhos	546b336d2d	adm5120: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35649	2013-02-18 09:56:26 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Gabor Juhos	451dd745bd	generic: ar8216: cleanup function/variable names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35642	2013-02-17 12:48:25 +00:00
Gabor Juhos	51996304c4	generic: ar8216: rename struct ar8216_priv to ar8xxx_priv Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35641	2013-02-17 12:48:23 +00:00
Gabor Juhos	4215b1c93c	ar71xx: add user-space support for the Mikrotik RB951G board [juhosg: change rb-951g to rb-951g-2hnd in the scripts] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35634	2013-02-17 10:08:41 +00:00
Gabor Juhos	7a709573d7	ar71xx: add kernel support for the Mikrotik RB951G board This is platform definition for the RB951G device. It's mostly rework of RB2011UAS patchset with network taken from the RB751 patches. The main difference is the flash layout used by this device. [juhosg: - remove dead code from mach-rb951g - add "-2HnD" suffix to the machine name - use a separate 615-MIPS-ath79-RB951G-support.patch] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35633	2013-02-17 10:08:35 +00:00
Hauke Mehrtens	1a8218d6e4	brcm47xx: add initial support for kernel 3.8 This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. SVN-Revision: 35632	2013-02-16 20:28:24 +00:00
Gabor Juhos	17c36f540c	ar71xx: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35629	2013-02-16 17:33:06 +00:00
Gabor Juhos	4375dae6d3	ramips: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35628	2013-02-16 17:26:52 +00:00
Gabor Juhos	62e80eba31	mpc85xx: add input drivers to default packages, and load those during preinit Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35626	2013-02-16 17:13:38 +00:00
Hauke Mehrtens	ce6a7543fe	brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules Adjust the "AutoLoad" number for the BGMAC module to be prior to the switch modules. This probably isn't real important as the modules are loaded in the correct order by preinit anyway. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35625	2013-02-16 16:27:33 +00:00
Hauke Mehrtens	9de704a03b	brcm47xx: improve cpuport detection for filesafe Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X Ask the switch driver where the CPU port is. SVN-Revision: 35624	2013-02-16 16:24:15 +00:00
Hauke Mehrtens	92d16f38d7	brcm47xx: fix network config on simpleshare The included patch will generate a correct network configuration on the simpletech simpleshare. Thank you for the patch Will Holmes (RealOpty) This closes #12361. SVN-Revision: 35623	2013-02-16 15:24:48 +00:00
Hauke Mehrtens	a21ba013f5	brcm47xx: handle return values of cfe_env_get() correctly. This closes #12746. SVN-Revision: 35622	2013-02-16 15:19:24 +00:00
Hauke Mehrtens	283bff02a2	brcm47xx: bgmac: fix unaligned accesses to network headers. SVN-Revision: 35621	2013-02-16 14:38:17 +00:00
Hauke Mehrtens	5fed2916c3	brcm47xx: fix unaligned access to mac address The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. This closes #9824. SVN-Revision: 35618	2013-02-16 13:46:00 +00:00
Hauke Mehrtens	d9580d224a	brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0. This should fix #13000. SVN-Revision: 35617	2013-02-16 12:37:24 +00:00
Gabor Juhos	7f20c2e19a	update x86 generic to kernel v3.7 Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35616	2013-02-16 12:12:52 +00:00
Gabor Juhos	7fd8525853	ramips: use the new macaddr_* helpers instead of maccalc Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35615	2013-02-16 11:50:25 +00:00
Gabor Juhos	753d713e92	ramips: use the mtd_get_mac_* helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35613	2013-02-16 11:50:21 +00:00
Jonas Gorski	dd77663fb0	kernel: add missing config options r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to not build with PTP enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35611	2013-02-16 11:39:45 +00:00
Jonas Gorski	485e52e1d8	bcm63xx: make nvram checksum failures non fatal fixes #12982. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35605	2013-02-15 12:23:49 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	f35c369710	generic: ar8216: move PHY4 RGMII workaround code out of the loop Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35603	2013-02-14 14:55:40 +00:00
Gabor Juhos	d64888ffc0	generic: ar8216: register the switch from the probe routine Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35602	2013-02-14 14:01:24 +00:00
Florian Fainelli	31dc805f88	x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH) Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35601	2013-02-14 13:00:07 +00:00
Hauke Mehrtens	c0f6c75cf7	brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" SVN-Revision: 35597	2013-02-14 12:38:16 +00:00
Gabor Juhos	9d86ba2ed4	mpc85xx: enable swconfig and the ar8216 driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35592	2013-02-13 16:51:23 +00:00
Gabor Juhos	6d18518e02	mpc85xx: enable the squashfs driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35591	2013-02-13 16:51:21 +00:00
Gabor Juhos	c3b3f77621	mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support Squashfs is unable to decompress some blocks without that: [ 199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt [ 199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26 [ 199.508016] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.521311] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.534594] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35590	2013-02-13 16:51:19 +00:00
Gabor Juhos	7484006498	ar71xx: fix factory image creation for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35589	2013-02-13 16:36:26 +00:00
Gabor Juhos	5f10ec3c36	ar71xx: fix switch-config for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35588	2013-02-13 16:36:23 +00:00
Hauke Mehrtens	54ca3eed5d	brcm47xx: configure vlan correctly on some recent devices. SVN-Revision: 35587	2013-02-13 16:05:52 +00:00
Hauke Mehrtens	4663d424a3	brcm47xx: add some more fixes to bgmac Thank you Rafał Miłecki and Nathan Hintz SVN-Revision: 35574	2013-02-12 20:10:38 +00:00
Hauke Mehrtens	7c0208b336	brcm47xx: update tg3 to the version send upstream SVN-Revision: 35573	2013-02-12 20:09:15 +00:00
Luka Perkov	7973ef64d6	mvebu: remove boards suffix SVN-Revision: 35572	2013-02-12 10:18:53 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	1f9ede9cfc	ar71xx: add script for automatic switch name migration Thanks to Jonas Gorski for the help. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35567	2013-02-11 21:41:16 +00:00
Felix Fietkau	2e7a4b088d	ar71xx: allow unknown multicast frames to pass to the CPU on AR934x SVN-Revision: 35564	2013-02-11 18:59:05 +00:00
Gabor Juhos	9525a075c1	ar8216: remove superfluous code from ar8216_config_init Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562	2013-02-11 16:57:31 +00:00
Gabor Juhos	94806a13af	ar71xx: use switchX names in network configuration Accessing the AR8xxx switches via the name of the attached ethernet device is not possible since r35560. Change the uci-defaults script to use switchX names in switch configurations. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35561	2013-02-11 16:54:52 +00:00
Gabor Juhos	9c86d268eb	generic: ar8216: don't use ethernet device name in register_switch The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560	2013-02-11 16:11:31 +00:00
Gabor Juhos	3f3eba88f6	generic: ar8216: reuse the private data from ar8216_probe The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559	2013-02-11 16:11:30 +00:00
Gabor Juhos	1afb759b35	generic: ar8216: use phydev instead of pdev everywhere Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555	2013-02-11 13:25:43 +00:00
Gabor Juhos	0b1fe07e8e	generic: ar8216: use pr_* macros for kernel messages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554	2013-02-11 13:14:00 +00:00
Gabor Juhos	eea297884e	generic: ar8216: fix PHY features setup Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549	2013-02-11 10:05:35 +00:00
Gabor Juhos	617076c613	generic: ar8216: add ar8xxx_probe_switch helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547	2013-02-10 19:02:01 +00:00
Gabor Juhos	98b13e39ac	generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546	2013-02-10 18:42:08 +00:00
Gabor Juhos	f97170a720	generic: ar8216: free mib counters from ar8xxx_free Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545	2013-02-10 18:42:07 +00:00
Gabor Juhos	7924e517af	generic: ar8216: add ar8xxx_free helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544	2013-02-10 18:42:05 +00:00
Gabor Juhos	77b3c551c4	generic: ar8216: add ar8xxx_create{,mii} helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543	2013-02-10 18:42:04 +00:00
Gabor Juhos	5f70b1db2a	generic: ar8216: remove redundant phy address check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542	2013-02-10 18:38:12 +00:00
Gabor Juhos	14fd37258b	generic: ar8216: only set phy_ptr if packet mangling is used Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541	2013-02-10 18:38:10 +00:00
Gabor Juhos	393163b098	generic: ar8216: add defines for the AR8316 POSTRIP register Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539	2013-02-10 13:18:48 +00:00
Gabor Juhos	5ed480598d	generic: ar8216: don't probe the chip multiple times It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538	2013-02-10 13:05:15 +00:00
Gabor Juhos	774da6c7a4	generic: ar8216: add sanity check to ar8216_probe Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537	2013-02-10 13:05:14 +00:00
Gabor Juhos	4720c75cf7	generic: ar8216: skip probe on unused PHY addresses Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536	2013-02-10 13:05:12 +00:00
Jonas Gorski	f07a33afc2	ar71xx: register the micro sd card reader on RB493G Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35535	2013-02-10 12:31:38 +00:00
Jonas Gorski	eedc3554fe	generic: b53: fix reverted error check in probe b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534	2013-02-10 12:31:36 +00:00
Jonas Gorski	200359a520	bcm63xx: handle huawei nvram layout Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533	2013-02-10 12:31:31 +00:00
Gabor Juhos	de123c4409	generic: ar8216: move sleep out of the loop It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532	2013-02-09 13:26:04 +00:00
Gabor Juhos	6ff973bdda	ar71xx: Routerboard 751 Mac Address Offset Fix We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519	2013-02-08 09:34:53 +00:00
Gabor Juhos	aa04441904	generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518	2013-02-08 09:13:18 +00:00
Gabor Juhos	9c1f95a416	generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517	2013-02-08 09:13:14 +00:00
Gabor Juhos	5393efc0c7	generic: ar8216: use inline function to convert swdev to ar8216 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514	2013-02-07 15:18:36 +00:00
Gabor Juhos	b87a1c757d	generic: ar8216: add mii_bus field to struct ar8216_priv Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513	2013-02-07 15:18:35 +00:00
Gabor Juhos	c130a3feac	generic: mvswitch: add detach callback Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512	2013-02-07 15:18:34 +00:00
Gabor Juhos	4be8c22e74	generic: ar8216: add detach callback The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511	2013-02-07 15:18:32 +00:00
Gabor Juhos	fe61fc2d7d	generic: add detach callback to struct phy_driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510	2013-02-07 15:18:24 +00:00
Hauke Mehrtens	07db9e8eab	brcm47xx: fix name of kmod-ocf-ubsec-ssb This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509	2013-02-06 22:51:25 +00:00
Hauke Mehrtens	a52832164b	brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up This fixes #12927. SVN-Revision: 35507	2013-02-06 14:57:00 +00:00
Florian Fainelli	6b0da6db6a	remove support for 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506	2013-02-05 22:36:54 +00:00
Florian Fainelli	e22926a46b	make default version 3.7.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505	2013-02-05 22:36:50 +00:00
Florian Fainelli	57803a98ec	remove superfluous calls to /lib/brcm63xx.sh The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504	2013-02-05 22:25:30 +00:00
Florian Fainelli	84d306d23c	remove references to the old switch driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503	2013-02-05 22:25:19 +00:00
Mirko Vogt	ec19a23bae	fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W SVN-Revision: 35501	2013-02-05 14:57:43 +00:00
Mirko Vogt	f460388ce2	add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500	2013-02-05 14:57:40 +00:00
Gabor Juhos	395d0bdc1f	generic: ar8216: clear driver specific data pointer in phy_device This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497	2013-02-05 08:39:26 +00:00
Gabor Juhos	2e7f38c243	generic: ar8216: unregister switch on error path Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496	2013-02-05 08:39:24 +00:00
Gabor Juhos	1bb8ad6050	mpc85xx: enable GPIO sysfs interface Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35495	2013-02-05 07:48:02 +00:00
Gabor Juhos	6ba265a573	mpc85xx: enable Freescale eSPI driver and m25p80 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35494	2013-02-05 07:48:01 +00:00
Gabor Juhos	eea43ffd33	mpc85xx: sync kernel config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35493	2013-02-05 07:47:59 +00:00
Hauke Mehrtens	8ba8225686	brcm47xx: fix detection of Asus RT-N16 This fixes #12936. SVN-Revision: 35492	2013-02-04 22:49:05 +00:00
Hauke Mehrtens	a1e3c0ca46	Add Failsafe support for Linksys E3000V1 / WRT610NV2 Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491	2013-02-04 22:40:57 +00:00
Hauke Mehrtens	c2198aba32	brcm47xx: Fix switch config on 4716/53115 devices Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490	2013-02-04 22:38:37 +00:00
Gabor Juhos	b97aee1ee8	coldfire: R.I.P. The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35489	2013-02-04 15:23:10 +00:00
Gabor Juhos	c41002971a	leon: R.I.P. It is broken since ~9 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35488	2013-02-04 15:23:08 +00:00
Gabor Juhos	539e0b5b84	imx21: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35487	2013-02-04 15:23:07 +00:00
Gabor Juhos	e7dee4ea87	octeon: R.I.P. It is broken since ~8 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35486	2013-02-04 15:23:05 +00:00
Gabor Juhos	da44b916cf	omap35xx: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35485	2013-02-04 15:23:04 +00:00
Jonas Gorski	8506964e6d	bcm63xx: add support for linux 3.8 Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482	2013-02-04 10:19:55 +00:00
Jonas Gorski	3b4fced67d	bcm63xx: add support for linux 3.7 Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481	2013-02-04 10:19:50 +00:00
Jonas Gorski	0e9365b346	kernel: generic: update the ehci overcurrent patch to upstream submission Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35480	2013-02-04 10:19:37 +00:00
Jonas Gorski	e0fe5596f8	kernel: generic: add back the patch exporting bcm63xx tag header It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35479	2013-02-04 10:19:35 +00:00
Jonas Gorski	34ad8f4e75	kernel: generic: update to 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35478	2013-02-04 10:19:28 +00:00
Jonas Gorski	a15e1a950d	bcm63xx: refresh 3.6 patches Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477	2013-02-04 10:19:24 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	b1168e70d3	ar71xx: use backported PCI_MEM_SIZE patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35470	2013-02-02 18:17:58 +00:00
Gabor Juhos	b9b341f05a	ar71xx: rename ar933x_uart patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35469	2013-02-02 18:17:53 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	4ac6eb480b	x86/kvm_guest: add support for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35460	2013-02-02 15:31:57 +00:00
Gabor Juhos	c340ef2ae2	x86: add missing symbols for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35459	2013-02-02 15:31:55 +00:00
Gabor Juhos	0f46f47512	x86/kvm_guest: add missing symbols for 3.3 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35458	2013-02-02 15:31:54 +00:00
Gabor Juhos	ab3e3cacaa	alix2: convert from kernel version 3.3.8 to 3.7.5 [juhosg: use 3.7.5 instead of 3.7.3] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35457	2013-02-02 15:31:52 +00:00
Gabor Juhos	4c223d7d4f	generic: convert crypto-ocf from kernel_thread to kthread recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35456	2013-02-02 15:31:44 +00:00
Gabor Juhos	7c87d28054	ar71xx: fixes whitespaces for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35455	2013-02-02 15:02:19 +00:00
Gabor Juhos	ecf55822bb	mpc85xx: nuke 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35453	2013-02-02 10:05:43 +00:00
Gabor Juhos	242859abae	mpc85xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35452	2013-02-02 10:05:40 +00:00
Gabor Juhos	cde71c305c	mpc85xx: add support for linux 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35451	2013-02-02 10:05:37 +00:00
Gabor Juhos	bbfd8cbf94	linux/3.7: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35450	2013-02-02 10:05:08 +00:00
Gabor Juhos	9a438b2271	ar71xx: build images for the TP-LINK TL-WR743ND v2 AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35449	2013-02-02 10:01:15 +00:00
Gabor Juhos	668e529220	generic: fix gc_sections patch Due to the patch, essential '.data..' sections are merged into the '.data' section: --- vmlinux.good.sect 2013-02-01 23:49:16.000000000 +0100 +++ vmlinux.bad.sect 2013-02-01 23:49:02.000000000 +0100 @@ -1,5 +1,5 @@ -vmlinux.good: file format elf32-powerpc +vmlinux.bad: file format elf32-powerpc Sections: Idx Name Size VMA LMA File off Algn @@ -53,43 +53,35 @@ CONTENTS, ALLOC, LOAD, READONLY, DATA 24 .machine.desc 00000460 c04e1000 004e1000 004f1000 22 CONTENTS, ALLOC, LOAD, DATA - 25 .data 0000f6a0 c04e2000 004e2000 004f2000 212 + 25 .data 0001635c c04e2000 004e2000 004f2000 212 CONTENTS, ALLOC, LOAD, DATA - 26 .data..init_task 00002000 c04f2000 004f2000 00502000 23 - CONTENTS, ALLOC, LOAD, DATA - 27 .data..page_aligned 00002000 c04f4000 004f4000 00504000 212 - CONTENTS, ALLOC, LOAD, DATA - 28 .data..cacheline_aligned 00000c00 c04f6000 004f6000 00506000 25 - CONTENTS, ALLOC, LOAD, DATA - 29 .data..read_mostly 000015e0 c04f6c00 004f6c00 00506c00 23 - CONTENTS, ALLOC, LOAD, DATA - 30 .sbss 000002e0 c04f9000 004f9000 005081e0 23 + 26 .sbss 000002e0 c04fa000 004fa000 0050835c 23 <...> This causes boot hang on powerpc. Modify the patch to ensure that the kernel specific '.data..' sections remain separate. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35447	2013-02-02 09:30:47 +00:00
Gabor Juhos	31af0dc186	ar71xx: fix mac address calculation on the OpenMesh MR600 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35446	2013-02-02 08:47:41 +00:00
Gabor Juhos	257b21f2d4	mpc85xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35445	2013-02-01 17:49:56 +00:00
Gabor Juhos	cf2faab4ae	mpc85xx: switch to 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35444	2013-02-01 17:49:54 +00:00
Gabor Juhos	56849d146c	mpc85xx: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35443	2013-02-01 17:49:53 +00:00
Gabor Juhos	630fffbead	mpc85xx: fix dts name for P1010RDB Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35442	2013-02-01 17:49:52 +00:00
Gabor Juhos	a2529eab2b	linux/3.6: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35441	2013-02-01 17:30:18 +00:00
Gabor Juhos	fb936218a1	linux/3.6: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35440	2013-02-01 17:30:15 +00:00
Gabor Juhos	495820f7a0	mpc85xx: remove broken flag Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35439	2013-02-01 17:28:54 +00:00
Gabor Juhos	4cb7e749ab	mpc85xx: build fdt file for the PB1010RDB board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35438	2013-02-01 17:28:51 +00:00
Gabor Juhos	20ca35570e	mpc85xx: enable PB1010RDB support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35437	2013-02-01 17:28:49 +00:00
Gabor Juhos	21b15ddda5	mpc85xx: image: fix building of multiple dtb files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35436	2013-02-01 17:28:47 +00:00
Gabor Juhos	d158dfc607	linux/3.3: disable crashlog on PPC It causes NULL pointer dereference: [ 0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c [ 0.644090] Unable to handle kernel paging request for data at address 0x00000000 [ 0.651533] Faulting instruction address: 0xc025d620 [ 0.656483] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.661856] P1010 RDB [ 0.664113] Modules linked in: [ 0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38 [ 0.672101] REGS: c7831ef0 TRAP: 0300 Not tainted (3.3.8) [ 0.677740] MSR: 00029000 <CE,EE,ME> CR: 42022082 XER: 20000000 [ 0.683817] DEAR: 00000000, ESR: 00000000 [ 0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000 [ 0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff [ 0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000 [ 0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000 [ 0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824 [ 0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8 [ 0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8 [ 0.736503] Call Trace: [ 0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable) [ 0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198 [ 0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120 [ 0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68 [ 0.762022] Instruction dump: [ 0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0 [ 0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35435	2013-02-01 17:28:44 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	6805275fdc	ar71xx: sysupgrade - fix OpenMesh MR600 total flash size Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35433	2013-02-01 15:50:54 +00:00
Gabor Juhos	979676ffcc	ar71xx: add sysupgrade support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35430	2013-02-01 15:50:47 +00:00
Gabor Juhos	2af995ba1d	ar71xx: add user-space support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35429	2013-02-01 15:50:45 +00:00
Gabor Juhos	8837d3a49b	ar71xx: add kernel support for the OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35428	2013-02-01 15:50:42 +00:00
Gabor Juhos	150bb9d0b1	ar71xx: remove unused OpenMesh MR600 led definitions Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35427	2013-02-01 15:50:39 +00:00
Gabor Juhos	fe3db74276	ar71xx: remove unused OpenMesh MR6000 platform code Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35426	2013-02-01 15:50:37 +00:00
Gabor Juhos	492cbcdd6b	ar71xx: build image for the TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35425	2013-02-01 15:50:34 +00:00
Gabor Juhos	119dc460a3	ar71xx: add user-space support for TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35424	2013-02-01 15:50:32 +00:00
Gabor Juhos	5bd02ca895	ar71xx: add kernel support for the TL-WDR3500 board WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet, and has only 1 USB port. Pending issues: * Leds are not working at all (except power and wlan_5g) * LAN switch ethernet ports are reversed with respect to case label. [Label] -> soft device [LAN1] -> eth0.4 [LAN2] -> eth0.3 [LAN3] -> eth0.2 [LAN4] -> eth0.1 Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35423	2013-02-01 15:50:29 +00:00
Jonas Gorski	ce8b226046	bcm63xx: replace kmod-switch with swconfig in default package set Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35407	2013-01-30 00:19:21 +00:00
Gabor Juhos	f7ff677169	ar71xx: add profile and build image for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403	2013-01-29 22:50:57 +00:00
Gabor Juhos	2a5193308f	ar71xx: add user space support for dir-825-c1 [juhosg: fix whitespaces in some scripts] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35402	2013-01-29 22:50:54 +00:00
Gabor Juhos	800da21cb1	ar71xx: add kernel support for dir-825-c1 [juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35401	2013-01-29 22:50:50 +00:00
Gabor Juhos	5a2aa8f184	generic: fix default compression selection in ubifs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35398	2013-01-29 21:32:22 +00:00
Gabor Juhos	da9a704e92	ar71xx: add profile and generate images for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35397	2013-01-29 19:12:34 +00:00
Gabor Juhos	5d4ddbce72	ar71xx: add user-space support for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35396	2013-01-29 19:12:32 +00:00
Gabor Juhos	5ca187570f	ar71xx: add kernel support for Atheros AP132 Reference Board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35395	2013-01-29 19:12:30 +00:00

... 9 10 11 12 13 ...

10573 commits