cns3xxx: fix USB ehci/ohci platform driver

Update ehci/ohci driver registration to conform to the new platform
drivers.

This fixes missing USB host support in 3.8.x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36309
This commit is contained in:
Felix Fietkau 2013-04-10 16:20:50 +00:00
parent edd8048107
commit 6436b3f736
2 changed files with 52 additions and 4 deletions

View file

@ -9,7 +9,7 @@
* Anton Vorontsov <avorontsov@mvista.com>
* Copyright 2011 Gateworks Corporation
* Chris Lang <clang@gateworks.com>
* Copyright 2012 Gateworks Corporation
* Copyright 2012-2013 Gateworks Corporation
* Tim Harvey <tharvey@gateworks.com>
*
* This file is free software; you can redistribute it and/or modify
@ -37,6 +37,8 @@
#include <linux/spi/flash.h>
#include <linux/if_ether.h>
#include <linux/pps-gpio.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -414,13 +416,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = {
static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
static int csn3xxx_usb_power_on(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*
* Set USB AHB INCR length to 16
*/
if (atomic_inc_return(&usb_pwr_ref) == 1) {
cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
MISC_CHIP_CONFIG_REG);
}
return 0;
}
static void csn3xxx_usb_power_off(struct platform_device *pdev)
{
/*
* EHCI and OHCI share the same clock and power,
* resetting twice would cause the 1st controller been reset.
* Therefore only do power up at the first up device, and
* power down at the last down device.
*/
if (atomic_dec_return(&usb_pwr_ref) == 0)
cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
}
static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static struct platform_device cns3xxx_usb_ehci_device = {
.name = "cns3xxx-ehci",
.name = "ehci-platform",
.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
.resource = cns3xxx_usb_ehci_resources,
.dev = {
.dma_mask = &cns3xxx_usb_ehci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cns3xxx_usb_ehci_pdata,
},
};
@ -438,13 +479,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = {
static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
.num_ports = 1,
.power_on = csn3xxx_usb_power_on,
.power_off = csn3xxx_usb_power_off,
};
static struct platform_device cns3xxx_usb_ohci_device = {
.name = "cns3xxx-ohci",
.name = "ohci-platform",
.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
.resource = cns3xxx_usb_ohci_resources,
.dev = {
.dma_mask = &cns3xxx_usb_ohci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &cns3xxx_usb_ohci_pdata,
},
};

View file

@ -28,7 +28,7 @@
#ifdef CONFIG_CACHE_L2X0
--- a/arch/arm/mach-cns3xxx/laguna.c
+++ b/arch/arm/mach-cns3xxx/laguna.c
@@ -941,6 +941,7 @@ static int __init laguna_model_setup(voi
@@ -989,6 +989,7 @@ static int __init laguna_model_setup(voi
late_initcall(laguna_model_setup);
MACHINE_START(GW2388, "Gateworks Corporation Laguna Platform")