KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19768 commits 3 branches 0 tags 154 MiB
Commit graph

1419 commits

Author SHA1 Message Date
Gabor Juhos
defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
SVN-Revision: 29102
 2011-11-14 07:38:07 +00:00
Gabor Juhos
6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
SVN-Revision: 29101
 2011-11-14 07:38:05 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos
d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos
34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos
2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos
0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
 2011-11-13 11:26:52 +00:00
Gabor Juhos
1afc76ea13 ar71xx: refresh kernel patches 
SVN-Revision: 29008
 2011-11-13 11:26:51 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos
8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
Felix Fietkau
7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau
94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Gabor Juhos
87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults 
SVN-Revision: 28833
 2011-11-07 21:44:24 +00:00
Gabor Juhos
09fdfa444f ar71xx: create ALL0258N network config from uci-defaults 
SVN-Revision: 28832
 2011-11-07 21:44:23 +00:00
Gabor Juhos
63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
SVN-Revision: 28831
 2011-11-07 21:44:20 +00:00
Gabor Juhos
c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults 
SVN-Revision: 28830
 2011-11-07 21:44:17 +00:00
Gabor Juhos
ee1a07a11d ar71xx: create RB-493G network config from uci-defaults 
SVN-Revision: 28829
 2011-11-07 21:44:12 +00:00
Gabor Juhos
d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults 
SVN-Revision: 28828
 2011-11-07 21:44:11 +00:00
Gabor Juhos
68be590894 ar71xx: create WRT160NL network config from uci-defaults 
SVN-Revision: 28827
 2011-11-07 21:44:09 +00:00
Gabor Juhos
83901e47c9 ar71xx: create PB92 network config from uci-defaults 
SVN-Revision: 28826
 2011-11-07 21:44:08 +00:00
Gabor Juhos
22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults 
SVN-Revision: 28825
 2011-11-07 21:44:07 +00:00
Gabor Juhos
e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
SVN-Revision: 28824
 2011-11-07 21:44:03 +00:00
Gabor Juhos
9298c7afe5 ar71xx: create RB-450 network config from uci-defaults 
SVN-Revision: 28823
 2011-11-07 21:44:02 +00:00
Gabor Juhos
ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
SVN-Revision: 28822
 2011-11-07 21:44:01 +00:00
Gabor Juhos
944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults 
SVN-Revision: 28821
 2011-11-07 21:43:58 +00:00
Gabor Juhos
6e8390ae6c ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
 2011-11-07 21:43:56 +00:00
Gabor Juhos
b62560413a ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
 2011-11-07 21:43:54 +00:00
Gabor Juhos
6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
 2011-11-07 21:43:52 +00:00
Gabor Juhos
0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script 
SVN-Revision: 28817
 2011-11-07 21:43:51 +00:00
Gabor Juhos
54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config 
SVN-Revision: 28816
 2011-11-07 21:34:33 +00:00
Gabor Juhos
5b6cc3eb9f ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
 2011-11-07 21:34:32 +00:00
Gabor Juhos
eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
SVN-Revision: 28812
 2011-11-07 20:25:00 +00:00
Gabor Juhos
8456840d82 ar71xx: wrap long lines in the upgrade script 
SVN-Revision: 28811
 2011-11-07 20:24:59 +00:00
Gabor Juhos
c60baf78ce ar71xx: fix WHR-HP-G300N firmware partition offset 
SVN-Revision: 28810
 2011-11-07 20:24:57 +00:00
Gabor Juhos
b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN 
SVN-Revision: 28807
 2011-11-07 13:32:43 +00:00
Gabor Juhos
034b2b7cde ar71xx: build image for the Buffalo WHR-HP-GN 
SVN-Revision: 28806
 2011-11-07 12:59:11 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos
0d9ae0a036 ar71xx: build image for the Buffalo WHR-G301N 
SVN-Revision: 28804
 2011-11-07 12:59:08 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos
63784ea2bc ar71xx: fix WHR-HP-G300N image generation 
SVN-Revision: 28802
 2011-11-07 12:59:05 +00:00
Gabor Juhos
b3b21cb3bf ar71xx: enable WHR-HP-G300N support in kernel config 
SVN-Revision: 28801
 2011-11-07 12:59:04 +00:00
Gabor Juhos
4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions 
SVN-Revision: 28800
 2011-11-07 12:59:03 +00:00
Gabor Juhos
4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
SVN-Revision: 28709
 2011-11-01 14:38:12 +00:00
Gabor Juhos
fc8adbb854 ar71xx: build image for the TL-WR741ND v4 board 
SVN-Revision: 28708
 2011-11-01 11:20:55 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos
21e651c9a1 ar71xx: add AR933X GMAC register defines 
SVN-Revision: 28705
 2011-11-01 11:20:50 +00:00
Gabor Juhos
43e2e2e4ef ar71xx: combine LEDs setup in one file 
SVN-Revision: 28704
 2011-11-01 11:20:49 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos
3a7b12a27d ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
 2011-11-01 09:23:32 +00:00
Gabor Juhos
f40557a692 ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
 2011-11-01 09:23:31 +00:00
Gabor Juhos
06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

SVN-Revision: 28695
 2011-11-01 09:23:25 +00:00
Gabor Juhos
693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750 
SVN-Revision: 28693
 2011-10-31 14:26:56 +00:00
Gabor Juhos
2bcd612e72 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

SVN-Revision: 28692
 2011-10-31 14:26:51 +00:00
Gabor Juhos
39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
 2011-10-30 13:06:30 +00:00
Gabor Juhos
415814f051 ar71xx: fix typos in image/Makefile 
SVN-Revision: 28618
 2011-10-27 07:54:52 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Gabor Juhos
4a70cace09 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 28597
 2011-10-26 06:12:47 +00:00
Gabor Juhos
c8b9086ac5 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28568
 2011-10-24 21:49:29 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
0ab6be2ba3 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28565
 2011-10-24 21:49:23 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Gabor Juhos
ef41e0a61c ar71xx: don't override CONFIG_FSNOTIFY 
SVN-Revision: 28563
 2011-10-24 21:49:18 +00:00
Jo-Philipp Wich
b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275) 
SVN-Revision: 28562
 2011-10-24 21:35:43 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Jonas Gorski
03f91068d1 ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

SVN-Revision: 28422
 2011-10-11 23:05:13 +00:00
Jonas Gorski
c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos
e45d7d7006 ar71xx: enable login only on the system console by default 
SVN-Revision: 28294
 2011-09-23 19:56:38 +00:00
Gabor Juhos
49ac36e818 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28279
 2011-09-21 11:47:56 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos
9fa51d5c38 ar71xx: fix copy&paste bug in WZRHPAG300H profile description 
SVN-Revision: 28274
 2011-09-21 11:47:48 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Gabor Juhos
ef2431c8d9 ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28271
 2011-09-21 11:47:44 +00:00
Gabor Juhos
76d0d1a837 ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28269
 2011-09-21 11:47:40 +00:00
Felix Fietkau
1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau
de8cabe839 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) 
SVN-Revision: 28173
 2011-09-05 18:37:48 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Jonas Gorski
def60e2918 ar71xx: make ehci patch apply again 
SVN-Revision: 27951
 2011-08-10 23:02:56 +00:00
Felix Fietkau
9e5ead9a51 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
SVN-Revision: 27950
 2011-08-10 22:24:56 +00:00
Gabor Juhos
7e5a1bc1d0 ar71xx: fix image generation 
SVN-Revision: 27907
 2011-08-05 10:31:52 +00:00
Gabor Juhos
85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
SVN-Revision: 27901
 2011-08-04 19:41:18 +00:00
Gabor Juhos
fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
SVN-Revision: 27900
 2011-08-04 19:41:17 +00:00
Gabor Juhos
fd3a5f64f2 ar71xx: cleanup image generation Makefile 
SVN-Revision: 27899
 2011-08-04 19:41:16 +00:00
Felix Fietkau
4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau
d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau
500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Felix Fietkau
54d97e6782 ar71xx: add some hacks to work around the misalignment in IP packets received on AR71xx and AR91xx ethernet MACs decreases CPU load with the default firewall for routing 95 mbit/s from 78% to 55% 
SVN-Revision: 27878
 2011-08-02 15:12:08 +00:00
Jonas Gorski
e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
 2011-07-28 11:57:51 +00:00
Felix Fietkau
9e4113b493 ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh 
SVN-Revision: 27756
 2011-07-24 14:40:35 +00:00
Felix Fietkau
1afe8a0726 rtl8366: unify rtl8366s and rtl8366rb platform data 
SVN-Revision: 27754
 2011-07-24 14:40:23 +00:00
Felix Fietkau
9105dad418 ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684) 
SVN-Revision: 27739
 2011-07-24 08:02:20 +00:00
Felix Fietkau
c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau
ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau
005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau
e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau
255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Gabor Juhos
5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash 
SVN-Revision: 27523
 2011-07-07 13:01:50 +00:00
Gabor Juhos
cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
SVN-Revision: 27522
 2011-07-07 13:01:48 +00:00
Gabor Juhos
89f6b29feb ar71xx: fix building of squashfs images 
SVN-Revision: 27446
 2011-07-04 12:10:03 +00:00
Felix Fietkau
7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
Gabor Juhos
b3a89652a5 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
 2011-07-02 08:37:59 +00:00
Jo-Philipp Wich
701543d3ef revert r27043 (#9513) 
SVN-Revision: 27343
 2011-07-01 19:52:57 +00:00
Jo-Philipp Wich
1edef5ec98 revert r27341, it introduce wrong behaviour for other models 
SVN-Revision: 27342
 2011-07-01 19:15:45 +00:00
Jo-Philipp Wich
3b3103b2f1 turn status LED off if device finished initializing 
SVN-Revision: 27341
 2011-07-01 18:39:53 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos
74a88749f3 ar71xx: remove 2.6.37 support as well 
SVN-Revision: 27313
 2011-06-29 08:57:36 +00:00
Gabor Juhos
1d5378f588 ar71xx: remove 2.6.38 support 
SVN-Revision: 27312
 2011-06-29 08:57:34 +00:00
Gabor Juhos
36e7a8b33e ar71xx: switch to 2.6.39 
SVN-Revision: 27311
 2011-06-29 08:57:33 +00:00
Gabor Juhos
6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Felix Fietkau
cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
SVN-Revision: 27283
 2011-06-25 13:54:42 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver 
SVN-Revision: 27222
 2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X 
SVN-Revision: 27221
 2011-06-19 13:17:50 +00:00
Gabor Juhos
b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver 
SVN-Revision: 27166
 2011-06-13 08:12:40 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code 
SVN-Revision: 27165
 2011-06-13 08:12:38 +00:00
Vasilis Tsiligiannis
70106f153d Remove trailing spaces, convert spaces to tabs 
SVN-Revision: 27153
 2011-06-09 19:30:50 +00:00
Felix Fietkau
9160e06af5 ar71xx: override inittab to enable login on ttyATH0 
SVN-Revision: 27128
 2011-06-07 17:07:10 +00:00
Gabor Juhos
13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
 2011-06-04 12:30:10 +00:00
Gabor Juhos
ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards 
SVN-Revision: 27101
 2011-06-04 12:30:09 +00:00
Felix Fietkau
31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos
750af1522b ar71xx: init external_reset for AR933X 
SVN-Revision: 27083
 2011-06-01 13:12:30 +00:00
Gabor Juhos
af4cae4498 ar71xx: add external_reset field to ath9k_platform_data 
SVN-Revision: 27082
 2011-06-01 13:12:28 +00:00
Gabor Juhos
f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1 
SVN-Revision: 27081
 2011-06-01 13:12:27 +00:00
Gabor Juhos
1a54e33c17 ar71xx: add get_mac_revision to ath9k_platform_data 
SVN-Revision: 27080
 2011-06-01 13:12:26 +00:00
Gabor Juhos
34ff32a6eb ar71xx: export SoC revision 
SVN-Revision: 27079
 2011-06-01 13:12:24 +00:00
Felix Fietkau
86dbc3a02d ar71xx: add profile and image building code for wzr-hp-ag300h 
SVN-Revision: 27076
 2011-06-01 02:23:30 +00:00
Felix Fietkau
4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
SVN-Revision: 27075
 2011-06-01 02:23:26 +00:00
Gabor Juhos
33fdc21d40 ar71xx: build images for the AP121 boards 
SVN-Revision: 27070
 2011-05-31 22:53:47 +00:00
Gabor Juhos
9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards 
SVN-Revision: 27069
 2011-05-31 22:53:45 +00:00
Gabor Juhos
646937135f ar71xx: add default network config for the AP121 boards 
SVN-Revision: 27068
 2011-05-31 22:53:44 +00:00
Gabor Juhos
f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards 
SVN-Revision: 27067
 2011-05-31 22:53:43 +00:00
Gabor Juhos
8beff081eb ar71xx: register UART for the AR933X SoCs 
SVN-Revision: 27066
 2011-05-31 22:53:42 +00:00
Gabor Juhos
b460bc6f12 ar71xx: add serial driver for the AR933X UART 
SVN-Revision: 27065
 2011-05-31 22:53:40 +00:00
Gabor Juhos
c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs 
SVN-Revision: 27064
 2011-05-31 22:53:39 +00:00
Gabor Juhos
e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs 
SVN-Revision: 27063
 2011-05-31 22:53:37 +00:00
Gabor Juhos
e0a0f3796a ar71xx: enable USB support for the AR933x SoCs 
SVN-Revision: 27062
 2011-05-31 22:53:36 +00:00
Gabor Juhos
677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop} 
SVN-Revision: 27061
 2011-05-31 22:53:35 +00:00
Gabor Juhos
88c45e3130 ar71xx: the watchdog uses the reference clock on the AR933x SoCs 
SVN-Revision: 27060
 2011-05-31 22:53:34 +00:00
Gabor Juhos
7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization 
SVN-Revision: 27059
 2011-05-31 22:53:32 +00:00
Gabor Juhos
e6fde61bec ar71xx: don't register 8250 UART on the AR933x SoCs 
SVN-Revision: 27058
 2011-05-31 22:53:31 +00:00
Gabor Juhos
8f7541a044 ar71xx: enable GPIO support for the AR933x SoCs 
SVN-Revision: 27057
 2011-05-31 22:53:30 +00:00
Gabor Juhos
e11b9c8371 ar71xx: add AR933x specific frequency initialization code 
SVN-Revision: 27056
 2011-05-31 22:53:29 +00:00
Gabor Juhos
0bf4478d37 ar71xx: add AR933x specific early_printk support 
SVN-Revision: 27055
 2011-05-31 22:53:27 +00:00
Gabor Juhos
6b3ca9ef0b ar71xx: add preliminary support for the Atheros AR933x SoCs 
SVN-Revision: 27054
 2011-05-31 22:53:26 +00:00
Gabor Juhos
761e67b394 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 27053
 2011-05-31 22:53:25 +00:00
Gabor Juhos
c8d182406d ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards 
SVN-Revision: 27051
 2011-05-31 22:53:22 +00:00
Gabor Juhos
0677e16248 ar71xx: Fix header offset for newer WRT160NL models 
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27049
 2011-05-31 22:53:20 +00:00
Gabor Juhos
be97e2a043 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols 
SVN-Revision: 27048
 2011-05-31 22:53:19 +00:00
Gabor Juhos
ea2f6d0edf ar71xx: reduce the size of the squashfs-4k binaries 
SVN-Revision: 27047
 2011-05-31 22:53:18 +00:00
Gabor Juhos
5d5f72415e ar71xx: initialize is_clk_25mhz field for AR9340 WMAC 
SVN-Revision: 27045
 2011-05-31 22:53:15 +00:00
Gabor Juhos
f7b3c3dfd1 ar71xx: sync ath9k_platform_data.h with compat-wireless 
SVN-Revision: 27044
 2011-05-31 22:53:14 +00:00
Gabor Juhos
650c7cc2fd ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
SVN-Revision: 27043
 2011-05-31 22:53:13 +00:00
Gabor Juhos
4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
SVN-Revision: 27042
 2011-05-31 22:53:12 +00:00
Gabor Juhos
60d5abbc27 ar71xx: ag71xx: make ring sizes configurable via ethtool 
SVN-Revision: 27041
 2011-05-31 22:53:10 +00:00
Gabor Juhos
7a2651f633 ar71xx: ag71xx: prepare to make ring sizes configurable 
SVN-Revision: 27040
 2011-05-31 22:53:09 +00:00
Gabor Juhos
669aba3871 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

SVN-Revision: 27039
 2011-05-31 22:53:07 +00:00
Felix Fietkau
2b5402d128 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
SVN-Revision: 27035
 2011-05-30 23:08:01 +00:00
Felix Fietkau
0ebc93831f ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
SVN-Revision: 27034
 2011-05-30 23:07:57 +00:00
Matteo Croce
17e257925f ar71xx: don't probe the LAN PHY 
SVN-Revision: 26924
 2011-05-17 11:15:24 +00:00
Matteo Croce
4deecea26b ar71xx: detect link on LAN ports 
SVN-Revision: 26922
 2011-05-17 11:12:56 +00:00
Matteo Croce
2ea528d1d0 ar71xx: add link detection on Ubiquiti devices WAN port 
SVN-Revision: 26891
 2011-05-14 23:31:50 +00:00
Matteo Croce
c0c2e18452 use correct macros and frame size in ag71xx 
SVN-Revision: 26890
 2011-05-14 23:10:06 +00:00
Matteo Croce
99d1d4f795 ar71xx: cosmetic fixes 
SVN-Revision: 26889
 2011-05-14 23:08:00 +00:00
Gabor Juhos
9b5036a29d ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

SVN-Revision: 26862
 2011-05-08 21:38:51 +00:00
Gabor Juhos
b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
 2011-05-08 21:38:49 +00:00
Gabor Juhos
858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs 
SVN-Revision: 26860
 2011-05-08 21:38:48 +00:00
Gabor Juhos
869f3cb718 ar71xx: remove superfluous fifo_cfg overrides 
SVN-Revision: 26859
 2011-05-08 21:38:46 +00:00
Gabor Juhos
5d77f370d6 ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856
 2011-05-08 16:32:53 +00:00
Gabor Juhos
3711658281 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855
 2011-05-08 13:30:36 +00:00
Gabor Juhos
ef53029870 ar71xx: ag71xx: fix build error if debugfs is enabled 
SVN-Revision: 26854
 2011-05-08 13:30:26 +00:00
Gabor Juhos
8b67d748cb ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
SVN-Revision: 26845
 2011-05-07 12:40:34 +00:00
Gabor Juhos
2166432ba0 ar71xx: ag71xx: add timestamps to ag71xx_buf 
SVN-Revision: 26844
 2011-05-07 12:40:28 +00:00
Gabor Juhos
896e1d1ab4 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
SVN-Revision: 26843
 2011-05-07 12:40:26 +00:00
Gabor Juhos
a6708d20d1 ar71xx: ag71xx: use debugfs_remove_recursive 
SVN-Revision: 26842
 2011-05-07 12:40:25 +00:00
Gabor Juhos
c39e5b9360 ar71xx: override wmac device name for the AR934x SoCs 
SVN-Revision: 26840
 2011-05-07 09:23:32 +00:00
Alexandros C. Couloumbis
7fb06ce6cd linux/ar71xx: add some missing symbols for nand/yaffs targets 
SVN-Revision: 26827
 2011-05-05 07:19:46 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
SVN-Revision: 26779
 2011-04-28 21:27:42 +00:00
Felix Fietkau
36aecb08b8 ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
SVN-Revision: 26777
 2011-04-28 19:30:49 +00:00
Alexandros C. Couloumbis
f13581eedb linux/ar71xx: update wget2nand script 
SVN-Revision: 26747
 2011-04-21 12:38:25 +00:00
Alexandros C. Couloumbis
015b010f90 linux/ar71xx: add 2.6.38 preliminary support 
SVN-Revision: 26746
 2011-04-21 11:45:23 +00:00
Felix Fietkau
cddc775ee8 ar71xx: enable the ip17xx PHY driver (fixes #5193, #8027) 
SVN-Revision: 26670
 2011-04-14 23:51:12 +00:00
Felix Fietkau
92bd56fea1 ar71xx: replace the madwifi profile with an ath5k profile 
SVN-Revision: 26626
 2011-04-12 21:10:45 +00:00
Gabor Juhos
fa9f45f345 ar71xx: fix build error w/o CONFIG_PCI 
SVN-Revision: 26606
 2011-04-12 13:14:56 +00:00
Gabor Juhos
adb6217471 ar71xx: don't hardcode console parameters in kernel config 
SVN-Revision: 26605
 2011-04-12 13:14:53 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons 
SVN-Revision: 26603
 2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
 2011-04-12 09:29:10 +00:00
Gabor Juhos
ef4c1d49a6 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac 
SVN-Revision: 26595
 2011-04-11 17:37:08 +00:00
Gabor Juhos
4711dea8ff ar71xx: fix AR934X_WMAC_SIZE 
SVN-Revision: 26594
 2011-04-11 17:37:03 +00:00
Gabor Juhos
8586e61b00 ar71xx: fix section mismatch 
SVN-Revision: 26562
 2011-04-09 18:47:55 +00:00
Gabor Juhos
a8bf5e3cdb ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq 
Also initialize that for each SoC and print its value along with the
other frequencies.

SVN-Revision: 26561
 2011-04-09 18:47:52 +00:00
Gabor Juhos
5573d6eb28 ar71xx: show the SoC type earlier 
SVN-Revision: 26560
 2011-04-09 18:47:50 +00:00
Gabor Juhos
ab4c3b3a1c ar71xx: cleanup SoC detection code 
SVN-Revision: 26559
 2011-04-09 18:47:49 +00:00
Gabor Juhos
694d9059c9 ar71xx: sync kernel configuration 
SVN-Revision: 26558
 2011-04-09 18:47:45 +00:00
Gabor Juhos
3310c70702 ar71xx: Fix mac address offset for AR934x 
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

SVN-Revision: 26557
 2011-04-09 18:47:42 +00:00
Gabor Juhos
8f889f9250 ar71xx: add DB120 board specific PCI initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26523
 2011-04-07 20:53:41 +00:00
Gabor Juhos
a0c3d49064 ar71xx: register WMAC device on the DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26522
 2011-04-07 20:53:37 +00:00
Gabor Juhos
428888faec ar71xx: add support for the built-in WMAC of the AR934x 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26521
 2011-04-07 20:53:34 +00:00
Gabor Juhos
13b1bd2ec2 ar71xx: create a separate profile for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26520
 2011-04-07 20:53:25 +00:00
Gabor Juhos
72c84e6876 ar71xx: build firmware image for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26519
 2011-04-07 20:53:23 +00:00
Gabor Juhos
14b42c44ec ar71xx: add initial support for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26518
 2011-04-07 20:53:19 +00:00
Gabor Juhos
f6ae4bf15f ar71xx: indicate AR934x support in menuconfig 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26517
 2011-04-07 20:53:14 +00:00
Gabor Juhos
2b064bb398 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26516
 2011-04-07 20:53:10 +00:00
Gabor Juhos
e4555809c7 ar71xx: enable PCI for the AR934[24] SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26515
 2011-04-07 20:53:05 +00:00
Gabor Juhos
4f395745af ar71xx: enable USB support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26514
 2011-04-07 20:53:03 +00:00
Gabor Juhos
25693b4769 ar71xx: enable GPIO support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26513
 2011-04-07 20:53:00 +00:00
Gabor Juhos
334a5ec36e ar71xx: add AR934x specific glue for ar7100_device{start,stop} 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26512
 2011-04-07 20:52:57 +00:00
Gabor Juhos
ccd3ebd309 ar71xx: add AR934x specific UART clock initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26511
 2011-04-07 20:52:53 +00:00