KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21209 commits 3 branches 0 tags 154 MiB
Commit graph

8530 commits

Author SHA1 Message Date
Gabor Juhos
1a1121158f ar71xx: add a common function to configure USB power GPIOs 
SVN-Revision: 32454
 2012-06-19 10:13:41 +00:00
Gabor Juhos
27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC 
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
 2012-06-19 10:13:38 +00:00
Gabor Juhos
ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC 
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
 2012-06-19 10:13:37 +00:00
Gabor Juhos
833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router 
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
 2012-06-19 09:52:15 +00:00
Felix Fietkau
26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de) 
SVN-Revision: 32447
 2012-06-19 00:22:04 +00:00
Felix Fietkau
5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x 
SVN-Revision: 32446
 2012-06-19 00:21:58 +00:00
Jo-Philipp Wich
f06473f8ff optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
 2012-06-18 23:36:50 +00:00
Jo-Philipp Wich
cbac321164 remove inittab override 
SVN-Revision: 32422
 2012-06-18 11:50:37 +00:00
Florian Fainelli
b89c81929e fix SPI message control handling for BCM6338/6348 
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
 2012-06-17 16:17:29 +00:00
Felix Fietkau
50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets 
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
 2012-06-16 21:06:33 +00:00
Florian Fainelli
b391548cf0 remove broken flags 
Thanks to Nicolas Le Falher for testing on Bifferboard.

SVN-Revision: 32389
 2012-06-16 16:45:28 +00:00
Jo-Philipp Wich
e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests 
SVN-Revision: 32384
 2012-06-15 12:59:49 +00:00
Luka Perkov
1c80d9f21d kirkwood: fix typo in uci-defaults/leds 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
 2012-06-13 18:41:42 +00:00
Felix Fietkau
dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection 
SVN-Revision: 32336
 2012-06-13 12:54:22 +00:00
Jonas Gorski
f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver 
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
 2012-06-11 22:24:58 +00:00
Luka Perkov
be5229f0ba kirkwood: ib62x0 fix reboot 
SVN-Revision: 32131
 2012-06-08 23:17:46 +00:00
Felix Fietkau
43b5706ef5 xburst: remove an obsolete CompareKernelPatchVer call 
SVN-Revision: 32115
 2012-06-07 16:32:44 +00:00
Florian Fainelli
6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled 
SVN-Revision: 32096
 2012-06-06 20:58:45 +00:00
Felix Fietkau
624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg) 
SVN-Revision: 32095
 2012-06-06 19:37:49 +00:00
Felix Fietkau
8b46a72583 kernel: add a few more tracing related symbols 
SVN-Revision: 32094
 2012-06-06 18:04:00 +00:00
Felix Fietkau
73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572) 
SVN-Revision: 32093
 2012-06-06 17:24:12 +00:00
Felix Fietkau
dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x 
SVN-Revision: 32092
 2012-06-06 17:24:09 +00:00
Felix Fietkau
02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install 
SVN-Revision: 32090
 2012-06-06 17:24:01 +00:00
Florian Fainelli
4c25e42fa8 fix alarm led color for board 96348A-122 
SVN-Revision: 32089
 2012-06-06 16:07:46 +00:00
Florian Fainelli
2f63f097de add 96348w3 board (#10764) 
SVN-Revision: 32088
 2012-06-06 15:45:04 +00:00
Florian Fainelli
9d38989d1f update livebox board support (#8677) 
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
 2012-06-06 15:44:56 +00:00
Florian Fainelli
c69a2cdfbb fix leds naming for all bcm63xx boards 
SVN-Revision: 32086
 2012-06-06 15:44:52 +00:00
Felix Fietkau
ce1d4d7ee9 kernel: make tracing support configurable 
SVN-Revision: 32085
 2012-06-06 15:25:57 +00:00
Florian Fainelli
23fc737b9d backport upstream spi-bcm63xx fixes 
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
 2012-06-06 13:31:33 +00:00
Florian Fainelli
7b12e9e49c backport spi message queue infrastructure 
SVN-Revision: 32077
 2012-06-06 13:31:30 +00:00
Florian Fainelli
4112094dbb increase led number in patch 301-led_count.patch 
So that board patches are only touching board-related code

SVN-Revision: 32076
 2012-06-06 13:31:24 +00:00
John Crispin
95e69ac4f1 clean up generic image building 
SVN-Revision: 32065
 2012-06-05 17:49:42 +00:00
Florian Fainelli
9a61b249c5 fix board patches so that new boards are withing appropriate ifdef 
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
 2012-06-05 13:40:41 +00:00
Florian Fainelli
5ec2209734 refresh generic patches 
SVN-Revision: 32059
 2012-06-05 13:40:38 +00:00
Florian Fainelli
36c99bcc42 fix bisectability of patch 303-spi-board-info.patch 
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
 2012-06-05 13:40:35 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Luka Perkov
605012ad5d kirkwood: reorganize target 
SVN-Revision: 32053
 2012-06-05 00:43:56 +00:00
Luka Perkov
7f00e5ffc6 uboot-envtools: update to 2012.04.01 
SVN-Revision: 32051
 2012-06-04 21:55:49 +00:00
Jonas Gorski
ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN 
The internal switch did not get registered.

SVN-Revision: 32041
 2012-06-04 08:35:25 +00:00
John Crispin
2b4ef2eafa adds unset Kbuild symbol 
SVN-Revision: 32026
 2012-06-02 14:03:32 +00:00
Gabor Juhos
f4b02b91ce malta: remove 3.2 patches 
SVN-Revision: 32023
 2012-06-02 12:06:28 +00:00
Gabor Juhos
c0c60f7bd3 malta: use common kernel config 
SVN-Revision: 32022
 2012-06-02 12:06:26 +00:00
Gabor Juhos
9375e83586 xburst: add missing config symbol 
SVN-Revision: 32021
 2012-06-02 12:06:15 +00:00
John Crispin
47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again 
SVN-Revision: 32006
 2012-05-30 17:41:28 +00:00
Jonas Gorski
3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes 
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
 2012-05-30 10:27:46 +00:00
Jonas Gorski
c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V 
SVN-Revision: 32003
 2012-05-30 10:27:42 +00:00
Gabor Juhos
9e02593b70 generic: ar8216: add revision specific PHY fixups for AR8327 
SVN-Revision: 32000
 2012-05-29 16:39:27 +00:00
Gabor Juhos
0d241e6670 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv 
SVN-Revision: 31999
 2012-05-29 16:39:26 +00:00
Gabor Juhos
b2fce19a70 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers 
SVN-Revision: 31998
 2012-05-29 16:39:24 +00:00
Gabor Juhos
cd7ab1d30b ar71xx: add default LED setup for the DB120 board 
SVN-Revision: 31997
 2012-05-29 16:39:23 +00:00
Gabor Juhos
29a579e43a cns21xx: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31996
 2012-05-29 16:39:22 +00:00
Gabor Juhos
ff74305623 lantiq: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31995
 2012-05-29 16:39:21 +00:00
Gabor Juhos
c81c6516de kirkwood: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31994
 2012-05-29 16:39:20 +00:00
Gabor Juhos
ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31993
 2012-05-29 16:39:18 +00:00
Gabor Juhos
4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup 
SVN-Revision: 31992
 2012-05-29 16:39:17 +00:00
Gabor Juhos
ba3ad24514 kirkwood: use uci-defaults to configure different boards 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
 2012-05-29 16:39:15 +00:00
Gabor Juhos
c71838faa1 ramips: WAN LED for D-Link DIR-300-B1 
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
 2012-05-29 16:39:03 +00:00
Felix Fietkau
a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality 
SVN-Revision: 31956
 2012-05-28 20:39:50 +00:00
Felix Fietkau
367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack 
SVN-Revision: 31934
 2012-05-28 02:55:59 +00:00
Felix Fietkau
8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x 
SVN-Revision: 31925
 2012-05-27 21:02:41 +00:00
Felix Fietkau
f638414fdc kernel: fix suppressing -s for linking modules when profiling is enabled 
SVN-Revision: 31924
 2012-05-27 21:02:36 +00:00
Gabor Juhos
8865f0923e ar71xx: fix TL-WR1041 image size 
SVN-Revision: 31923
 2012-05-27 17:21:47 +00:00
Gabor Juhos
1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller 
SVN-Revision: 31922
 2012-05-27 17:10:00 +00:00
Gabor Juhos
9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883 
SVN-Revision: 31921
 2012-05-27 17:09:58 +00:00
Gabor Juhos
78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins 
SVN-Revision: 31920
 2012-05-27 17:09:56 +00:00
Gabor Juhos
0622fdd82c ramips: rt305x: remove superfluous controller_data assignment 
SVN-Revision: 31919
 2012-05-27 17:09:52 +00:00
Gabor Juhos
7f5bec0642 ramips: make rt2x00 firmware extraction quiet 
SVN-Revision: 31918
 2012-05-27 17:09:50 +00:00
Gabor Juhos
86dad96fd0 generic: rtl8367: rename a misnamed variable 
SVN-Revision: 31917
 2012-05-27 17:09:47 +00:00
Gabor Juhos
705d31203c generic: rtl8366_smi: remove duplicated spinlock initialization 
SVN-Revision: 31916
 2012-05-27 17:09:45 +00:00
Gabor Juhos
9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol 
SVN-Revision: 31915
 2012-05-27 17:09:43 +00:00
Gabor Juhos
466ef30173 generic: rtl8367: allow to use VLANs > 31 
SVN-Revision: 31914
 2012-05-27 17:09:41 +00:00
John Crispin
f567980d38 move files-3.3 -> files 
SVN-Revision: 31912
 2012-05-27 16:13:02 +00:00
John Crispin
8002770520 3.2 R.I.P. 
SVN-Revision: 31911
 2012-05-27 16:12:59 +00:00
John Crispin
81ddc886e1 dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
 2012-05-27 16:02:22 +00:00
John Crispin
6e8fe84472 fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
 2012-05-27 16:02:20 +00:00
John Crispin
3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
 2012-05-27 16:02:16 +00:00
Felix Fietkau
51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD 
SVN-Revision: 31906
 2012-05-27 15:16:37 +00:00
Gabor Juhos
0b8c1c8dfb linux/3.2: R.I.P. 
SVN-Revision: 31905
 2012-05-27 15:01:37 +00:00
Gabor Juhos
20ba6d90e3 xburst: remove support for old kernels 
SVN-Revision: 31904
 2012-05-27 15:01:35 +00:00
Gabor Juhos
d043cb2c34 xburst: switch to 3.3 and add broken flag 
SVN-Revision: 31903
 2012-05-27 15:01:33 +00:00
Gabor Juhos
9a26e9f843 xburst: add support for 3.3 
SVN-Revision: 31902
 2012-05-27 15:01:32 +00:00
Gabor Juhos
9dd7a6d9e2 ppc44x: remove 3.2 support 
SVN-Revision: 31901
 2012-05-27 15:01:30 +00:00
Gabor Juhos
05d74942b1 ppx44x: switch to 3.3 and add broken flag 
SVN-Revision: 31900
 2012-05-27 15:01:28 +00:00
Gabor Juhos
9300e0496c ppc44x: add support for 3.3 
Compile tested only.

SVN-Revision: 31899
 2012-05-27 15:01:27 +00:00
Gabor Juhos
c50f1f7536 cobalt: switch to 3.3 and add broken flag 
Compile tested only.

SVN-Revision: 31898
 2012-05-27 15:01:26 +00:00
Gabor Juhos
471cf87ff0 ep93xx: remove 3.2 support 
SVN-Revision: 31897
 2012-05-27 15:01:24 +00:00
Gabor Juhos
400b9b5b87 ep93xx: switch to 3.3 and add broken flag 
SVN-Revision: 31896
 2012-05-27 15:01:23 +00:00
Gabor Juhos
7501f2364f ep93xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31895
 2012-05-27 15:01:21 +00:00
Gabor Juhos
907e88a37f au1000: remove 3.2 support 
SVN-Revision: 31894
 2012-05-27 15:01:18 +00:00
Gabor Juhos
fbe10e73c6 au1000: switch to 3.3 and add broken flag 
SVN-Revision: 31893
 2012-05-27 15:01:17 +00:00
Gabor Juhos
e065d5cfbe au1000: add support for 3.3 
Compile tested only.

SVN-Revision: 31892
 2012-05-27 15:01:15 +00:00
Gabor Juhos
de4c4d35e1 linux/3.1: R.I.P. 
SVN-Revision: 31891
 2012-05-27 15:01:09 +00:00
Gabor Juhos
cead4b47ab omap24xx: remove 3.1 support 
SVN-Revision: 31890
 2012-05-27 15:01:07 +00:00
Gabor Juhos
7a4db11fbb omap24xx: switch to 3.3 and add broken flag 
SVN-Revision: 31889
 2012-05-27 15:01:05 +00:00
Gabor Juhos
d004168445 cns3xxx: remove 3.1 support 
SVN-Revision: 31888
 2012-05-27 15:01:03 +00:00
Gabor Juhos
6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag 
SVN-Revision: 31887
 2012-05-27 15:01:02 +00:00
Felix Fietkau
6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers 
SVN-Revision: 31886
 2012-05-27 14:43:58 +00:00
Jonas Gorski
ec7786c2ec bcm63xx: build images for DSL-274XB revision F1 
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
 2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9 bcm63xx: add ath9k to atheros wifi profile 
SVN-Revision: 31884
 2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab bcm63xx: enable bcm6328 support and required drivers 
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
 2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335 bcm63xx: add support for DSL-274XB rev F1 
SVN-Revision: 31882
 2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f bcm63xx: fix port state after network down 
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
 2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices 
SVN-Revision: 31880
 2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
 2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328 
SVN-Revision: 31878
 2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection 
SVN-Revision: 31877
 2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
 2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44 bcm63xx: add a default switch configuration for DSL-274XB 
SVN-Revision: 31874
 2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa bcm63xx: setup network config through uci-defaults 
SVN-Revision: 31873
 2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
SVN-Revision: 31872
 2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0 bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
 2012-05-27 13:22:08 +00:00
Felix Fietkau
230c0eb2cb kernel: fix a warning in the connmark module 
SVN-Revision: 31856
 2012-05-24 18:25:08 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
c57409e79d ar71xx: fix an insignificant typo 
Patch from #11485.

SVN-Revision: 31847
 2012-05-23 21:05:30 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Gabor Juhos
758f670376 ar71xx: add support for TP-Link TL-MR3040 
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
 2012-05-23 21:05:24 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
 2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
 2012-05-23 21:05:22 +00:00
Gabor Juhos
1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver 
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
 2012-05-23 21:05:19 +00:00
Felix Fietkau
9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 
SVN-Revision: 31835
 2012-05-20 21:58:03 +00:00
Felix Fietkau
ce59af117c kernel: merge a net-next fq_codel backlog handling fix 
SVN-Revision: 31813
 2012-05-18 22:12:15 +00:00
Gabor Juhos
02c2f449d7 omap24xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31810
 2012-05-18 20:22:32 +00:00
Gabor Juhos
c2a2d59db5 cns3xxx: add support for 3.3 
Compile tested only.

SVN-Revision: 31809
 2012-05-18 20:10:53 +00:00
Gabor Juhos
1fd4bf270b linux/2.6.39: R.I.P. 
SVN-Revision: 31808
 2012-05-18 20:10:51 +00:00
Gabor Juhos
05c0d8b28e cns3xxx: sync kernel config 
SVN-Revision: 31807
 2012-05-18 20:10:48 +00:00
Gabor Juhos
9718f03e24 cns3xxx: remove 2.6.39 support 
SVN-Revision: 31806
 2012-05-18 20:10:46 +00:00
Gabor Juhos
9e78becbac cns3xxx: switch to 3.1 
Compile tested only.

SVN-Revision: 31805
 2012-05-18 20:10:44 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
 2012-05-18 20:10:33 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash 
detect nvram on Linksys E3200

SVN-Revision: 31790
 2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer 
SVN-Revision: 31789
 2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3 
SVN-Revision: 31788
 2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver 
SVN-Revision: 31787
 2012-05-18 15:44:25 +00:00
Gabor Juhos
e3678eb33e cobalt: remove 2.6.39 specific patches 
SVN-Revision: 31785
 2012-05-18 09:59:22 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3 
Compile tested only.

SVN-Revision: 31784
 2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC 
SVN-Revision: 31783
 2012-05-18 09:57:29 +00:00
Felix Fietkau
3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 
SVN-Revision: 31781
 2012-05-17 21:20:23 +00:00
Hauke Mehrtens
c30405070c kernel: add some missing config options added by r31756 
SVN-Revision: 31774
 2012-05-17 13:28:30 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
SVN-Revision: 31772
 2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2 
SVN-Revision: 31771
 2012-05-17 13:20:10 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3 
Compile tested only.

SVN-Revision: 31765
 2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3 
Compile tested only.

SVN-Revision: 31764
 2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3 
Compile tested only.

SVN-Revision: 31763
 2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3 
Compile tested only.

SVN-Revision: 31762
 2012-05-17 06:40:56 +00:00
Felix Fietkau
54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
 2012-05-16 15:23:03 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3 
Compile tested only.

SVN-Revision: 31752
 2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs 
SVN-Revision: 31751
 2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs 
SVN-Revision: 31749
 2012-05-16 10:44:49 +00:00
Gabor Juhos
637fd23428 linux/3.3: add missing symbol 
SVN-Revision: 31748
 2012-05-16 10:44:46 +00:00
Gabor Juhos
67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

SVN-Revision: 31738
 2012-05-15 11:12:31 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
SVN-Revision: 31736
 2012-05-15 10:36:39 +00:00
John Crispin
364f47e454 code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
 2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
 2012-05-15 09:38:02 +00:00
John Crispin
9785ec070e set 3.3.6 as default 
SVN-Revision: 31733
 2012-05-15 09:37:59 +00:00
John Crispin
c61ada1db8 set 3.3.5 as default 
SVN-Revision: 31718
 2012-05-14 16:11:26 +00:00
Gabor Juhos
2fceae7ec4 linux/3.0: R.I.P. 
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
 2012-05-14 15:48:34 +00:00
Gabor Juhos
a3d349a3b3 realview: remove 3.0 support 
SVN-Revision: 31716
 2012-05-14 15:48:32 +00:00
Gabor Juhos
e2ecabd761 realview: switch to 3.3 
SVN-Revision: 31715
 2012-05-14 15:48:31 +00:00
Gabor Juhos
46c7d58726 realview: add 3.3 support 
SVN-Revision: 31714
 2012-05-14 15:48:29 +00:00
Gabor Juhos
8f629f2a22 linux/3.3: more missing config symbols 
SVN-Revision: 31713
 2012-05-14 15:48:23 +00:00
Hauke Mehrtens
a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX 
SVN-Revision: 31710
 2012-05-14 11:28:02 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Hauke Mehrtens
679b6a0722 amazon: fix section mismatch 
SVN-Revision: 31707
 2012-05-13 15:31:42 +00:00
Hauke Mehrtens
abd74f86b4 amazon: update amazon target to kernel 3.3 
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
 2012-05-13 15:10:40 +00:00
Gabor Juhos
60d3ffb49a gemini: remove 2.6.37 support 
SVN-Revision: 31700
 2012-05-13 12:04:04 +00:00
Gabor Juhos
672ff3de6e gemini: switch to 3.3 
SVN-Revision: 31699
 2012-05-13 12:04:02 +00:00
Gabor Juhos
d0ac4c1f03 gemini: add support for 3.3 
SVN-Revision: 31698
 2012-05-13 12:03:59 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1 
SVN-Revision: 31696
 2012-05-13 00:16:57 +00:00
Hauke Mehrtens
31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222 
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
 2012-05-13 00:08:12 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
 2012-05-12 23:59:12 +00:00
Gabor Juhos
e710aeeab1 linux/2.6.38: R.I.P. 
It is used only by the broken coldfire target.

SVN-Revision: 31688
 2012-05-12 12:05:21 +00:00
Gabor Juhos
08ed044595 linux/2.6.37: R.I.P. 
SVN-Revision: 31687
 2012-05-12 12:05:19 +00:00
Gabor Juhos
c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37 
SVN-Revision: 31686
 2012-05-12 12:05:18 +00:00
Gabor Juhos
a2efef024e iop32x: remove 2.6.37 support 
SVN-Revision: 31685
 2012-05-12 10:49:36 +00:00
Gabor Juhos
a5d4de7da2 iop32x: switch to 3.3 
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
 2012-05-12 10:49:34 +00:00
Gabor Juhos
598fe0e93b iop32x: add 3.3 support 
SVN-Revision: 31683
 2012-05-12 10:49:32 +00:00
Gabor Juhos
bf8e96712e sibyte: remove 2.6.37 support 
SVN-Revision: 31682
 2012-05-12 10:49:30 +00:00
Gabor Juhos
edb129bb24 sibyte: switch to 3.3 
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
 2012-05-12 10:49:28 +00:00
Gabor Juhos
fd651daa4b sibyte: add 3.3 support 
SVN-Revision: 31680
 2012-05-12 10:49:26 +00:00
Gabor Juhos
4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error 
SVN-Revision: 31679
 2012-05-12 10:49:23 +00:00
Gabor Juhos
cabfa5b364 orion: remove the broken broken flag 
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
 2012-05-10 20:20:43 +00:00
Gabor Juhos
ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310 
SVN-Revision: 31673
 2012-05-09 16:16:52 +00:00
John Crispin
dc4cfd3a64 Add 3.3 config files 
SVN-Revision: 31672
 2012-05-09 12:52:24 +00:00
John Crispin
75827c538d Add missing 3.3 patches 
SVN-Revision: 31671
 2012-05-09 12:52:21 +00:00
John Crispin
7d638fbb2f Drop 2.6.32 support 
SVN-Revision: 31670
 2012-05-09 12:52:19 +00:00
Gabor Juhos
200227e0b4 kirkwood: add support for the ZyXEL NSA-310 
SVN-Revision: 31669
 2012-05-09 11:38:43 +00:00
Gabor Juhos
213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
 2012-05-09 11:38:41 +00:00
Gabor Juhos
d4876692c1 kirkwood: enable GPIO sysfs interface 
SVN-Revision: 31667
 2012-05-09 11:38:40 +00:00
Gabor Juhos
d1eed108bb kirkwood: nuke 2.6.37 support 
SVN-Revision: 31666
 2012-05-09 11:38:39 +00:00
Gabor Juhos
861b9b25e0 kirkwood: switch to 3.3 
SVN-Revision: 31665
 2012-05-09 11:38:37 +00:00
Gabor Juhos
b272041998 kirkwood: add 3.3 support 
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
 2012-05-09 11:38:36 +00:00
Gabor Juhos
500ec36515 ixp4xx: nuke 2.6.37 support 
SVN-Revision: 31663
 2012-05-09 10:48:44 +00:00
Gabor Juhos
d25a4e7ddc ixp4xx: switch to 3.3 
SVN-Revision: 31662
 2012-05-09 10:48:43 +00:00
Gabor Juhos
d5093de0b1 mpc85xx: remove 2.6.38 support 
SVN-Revision: 31661
 2012-05-09 10:48:41 +00:00
Gabor Juhos
ab71a428c5 mpc85xx: switch to 3.3 and add broken flag 
It is compile tested only.

SVN-Revision: 31660
 2012-05-09 10:48:39 +00:00
Gabor Juhos
db376b45d9 orion: nuke 3.0 support 
SVN-Revision: 31659
 2012-05-09 10:48:38 +00:00