Commit graph

981 commits

Author SHA1 Message Date
John Crispin
12b73579e4 lantiq: update to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42188
2014-08-18 13:09:30 +00:00
John Crispin
b796ff6ef3 lantiq: generate unique ARV7519RW22 firmware
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42183
2014-08-18 13:09:11 +00:00
John Crispin
c2668207de lantiq: add support for xrx200 firmware depending on soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42182
2014-08-18 13:09:08 +00:00
John Crispin
db2e450ab5 lantiq: export soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42181
2014-08-18 13:08:59 +00:00
John Crispin
5f71dbb005 lantiq: improve ARV7519RW22 support
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
2014-08-18 13:08:56 +00:00
John Crispin
c21a20cd78 lantiq: fix dgn3500 and td8970 wifi
ath9k failed to come up due to a bad mac addr

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41860
2014-07-28 15:26:41 +00:00
John Crispin
3836d40a8a lantiq: fix dgn3500 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41854
2014-07-28 08:06:40 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin
4beb468f11 lantiq: fix board_id/boardname for VGV7519
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41672
2014-07-16 11:36:02 +00:00
John Crispin
85cacfd753 lantiq: vgv7519 add missing wps label to dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 41655
2014-07-14 18:43:02 +00:00
John Crispin
c8bde9da4a lantiq: detect board in preinit state
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41638
2014-07-14 07:38:52 +00:00
Gabor Juhos
d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin
6134a3de30 target/linux/*: more dead package cleanups
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41574
2014-07-10 20:15:50 +00:00
John Crispin
32e93efc73 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
John Crispin
332b4d556f lantiq: generate /tmp/sysinfo/lantiq_board_name if missing
Run lantiq_board_detect from lantiq_board_name and lantiq_board_model.

This was the one thing missing from r41474 for sysupgrade board
detection to work properly.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41567
2014-07-10 19:16:43 +00:00
John Crispin
03fef9a2d2 lantiq: enable SysupgradeNAND for BTHOMEHUBV2B
Enables SysupgradeNAND for BTHOMEHUBV2B.

Depends on the following patches:
http://patchwork.openwrt.org/patch/5817/
http://patchwork.openwrt.org/patch/5848/
http://patchwork.openwrt.org/patch/5851/

Many thanks everyone for your help the last couple of days.

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41566
2014-07-10 19:16:39 +00:00
John Crispin
4e35eef1d7 lantiq xway: disable gluebi and enable ubiblock
Disables gluebi and enables ubiblock on lantiq xway. Squashfs
images on nand use ubifs instead of jffs2 for the overlay.

I'll leave the equivalent patch for xrx200 to someone who has a
board to test.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41565
2014-07-10 19:16:35 +00:00
John Crispin
1179d4f924 lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files
New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41474
2014-07-02 16:37:23 +00:00
John Crispin
e2915c6981 lantiq: add support for /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41472
2014-07-02 16:33:11 +00:00
John Crispin
313db9d0ee lantiq: fix missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41454
2014-07-02 07:43:32 +00:00
John Crispin
5f31f01853 lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget
Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.

These drivers are not needed for ASE, Danube and AR9.
As side effect PHY11G and PHY22F firmwares are not included in the
kernel image, which saves 64 KB.

Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41449
2014-07-01 13:18:38 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
John Crispin
d219e055be lantiq: remove deprecated jffs2_nand configuration
As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.

If anyone else is using jffs2_nand on a lantiq target please speak
up!

Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41312
2014-06-24 18:12:52 +00:00
John Crispin
aca708e4e6 lantiq: ubinize autoresize flag for rootfs_data
Setting this flag allows rootfs_data to expand on first boot
to fill remaining free space on nand.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41310
2014-06-24 18:12:41 +00:00
John Crispin
432f7e52db lantiq: copy rootfs-overlay.ubi to bin/lantiq
At the moment, an rootfs.ubi is copied over to bin/lantiq
but rootfs-overlay.ubi is not. This adds it.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41270
2014-06-19 14:13:04 +00:00
John Crispin
6c46a10246 lantiq: refresh patches
this adds ben's ath9k fixup

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41269
2014-06-19 14:12:59 +00:00
John Crispin
575127fe1c lantiq: DGN3500 (all known variants) factory and sysupgrade image building support
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.

The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.

This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.

I tested the patch successfully on my device.

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 41236
2014-06-17 15:38:54 +00:00
John Crispin
85ca75decd lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition and rootfs type
This patches the BTHOMEHUB2B device tree to make use of the
new code for automatic detection of the ubi partition and the
rootfs type within it. Gets rid of the ugly alternative bootargs
lines.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41214
2014-06-16 18:54:38 +00:00
John Crispin
e6c46554bb lantiq: fixup vgv7519 usb support
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
2014-06-16 18:54:33 +00:00
John Crispin
e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin
ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
John Crispin
7a03f41940 lantiq: fix eep handling patch
0b79a4a66d17d2c7c12cde8d13637c1b0e5152c2 broke the patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41005
2014-06-05 08:19:52 +00:00
John Crispin
f09ac641d6 lantiq: ath5k fix in wifi and ethernet eeprom handling patch.
ath5k fix in wifi and ethernet eeprom handling patch.

Without the line that adds the patch of_ath5k_eeprom_probe cause a
kernel panic, at least with the ARV4518PW.
Tested only in the modem-router mentioned above.

This patch is based in Bruno's hack present in patch #5454.

Signed off by: Bruno Rodríguez <bruno.rodriguez.1980@gmail.com>
Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40999
2014-06-04 07:20:22 +00:00
John Crispin
fa48c0db1d lantiq: fix up eth_mac and ath_eep support
this patch got messed up by the last rebase

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40948
2014-06-02 12:45:29 +00:00
John Crispin
7ba5188fe9 lantiq: Fix ARV7510PW22 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40920
2014-06-02 12:43:43 +00:00
John Crispin
d4ec98c2cc lantiq: Fix ARV4518 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40919
2014-06-02 12:43:35 +00:00
John Crispin
f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Felix Fietkau
5ab4fe9c0e lantiq: strip FCS from received ethernet frames on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40719
2014-05-07 18:36:58 +00:00
Felix Fietkau
6142d061b5 lantiq: support loading the dsl firmware from a flash partition as a raw gzipped tarfile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40715
2014-05-06 21:06:22 +00:00
John Crispin
4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
2014-04-22 08:08:46 +00:00
John Crispin
5836cde0e0 Fix vr9_phy22f_a2x.bin firmware linking
vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40543
2014-04-22 08:08:06 +00:00
John Crispin
cdc53e2ec9 lantiq: fix maximum ethernet header length
The total ethernet frame length should be written to the hardware
register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This
patch fixes network issues on various Danube boards, especially when
VLAN tagging is enabled.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40541
2014-04-22 08:07:53 +00:00
John Crispin
c4aae8fbc5 lantiq: ARV7519RW22: several fixes
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
2014-04-16 12:01:09 +00:00
John Crispin
9fbbd04f45 lantiq: enable switch on td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
2014-04-12 21:22:21 +00:00
John Crispin
f2b0a6365e Fix ARV7519RW images
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40495
2014-04-12 21:22:08 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
John Crispin
60edb8f47b lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40461
2014-04-11 20:40:34 +00:00
John Crispin
390e856cb2 lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40460
2014-04-11 20:40:24 +00:00
John Crispin
eebc673f1e lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
2014-04-10 08:14:33 +00:00
John Crispin
f1963c02f4 lantiq: make dsl_notify.sh executable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40436
2014-04-09 16:31:14 +00:00
John Crispin
858b972e66 lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40418
2014-04-07 15:10:22 +00:00
John Crispin
c821836395 lantiq: remove unmaintained code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40392
2014-04-06 09:21:44 +00:00
John Crispin
f464b7d176 lantiq: cleanup the dsl control scripts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40381
2014-04-05 16:34:20 +00:00
John Crispin
a05356f48a lantiq: nand fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40372
2014-04-03 14:27:02 +00:00
John Crispin
15139d468c lantiq: BT Home Hub 2B support - userspace
Basic userspace configuration for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40371
2014-04-03 14:26:58 +00:00
John Crispin
709cab91d2 lantiq: BT Home Hub 2B support - board support
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
2014-04-03 14:26:54 +00:00
John Crispin
469b8297fa lantiq: BT Home Hub 2B support - jedec probe
Lantiq nor patch. Adds support for jedec probing if cfi
probing fails.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40369
2014-04-03 14:26:50 +00:00
John Crispin
78a7ae428f lantiq: make td8970 wifi led work
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40368
2014-04-03 14:26:46 +00:00
John Crispin
58eccdac4f lantiq: fix vr9 ubi handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
2014-04-03 14:26:24 +00:00
John Crispin
e36568e74b lntiq: add support for Astoria ARV7519RW.
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
2014-03-30 10:02:30 +00:00
John Crispin
42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
2014-03-30 09:16:52 +00:00
John Crispin
5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin
8b0507c9ca lantiq: fix mtd_split for brnboot firmware images
The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324
2014-03-30 09:16:35 +00:00
John Crispin
0c73e85cd0 lantiq: fixup ath5k support
http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40323
2014-03-30 09:16:31 +00:00
John Crispin
112059073e lantiq: fix initial VLAN conf for P2601HNFX
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
2014-03-30 09:16:23 +00:00
John Crispin
5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
2014-03-30 09:16:19 +00:00
John Crispin
e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin
3a43738e21 lantiq: reset gphys on reboot
If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40318
2014-03-30 09:16:10 +00:00
John Crispin
9531390aad lantiq: add support for ZyXEL P2812HNUFX
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
2014-03-30 09:16:06 +00:00
John Crispin
9b78e13aa3 lantiq: add ubifs support in image Makefile
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40316
2014-03-30 09:16:02 +00:00
John Crispin
2803e79be6 lantiq: add ubifs to FEATURES
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40315
2014-03-30 09:15:58 +00:00
John Crispin
07eb49b7e0 lantiq: xrx200: add ubi support in the kernel
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
2014-03-30 09:15:54 +00:00
John Crispin
82da5ca248 lantiq: add inital support for xrx200 switch
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40313
2014-03-30 09:15:50 +00:00
John Crispin
32e2246270 lantiq: xrx200: fix duplex
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40312
2014-03-30 09:15:46 +00:00
John Crispin
93e5c8cefc lantiq: fixup 3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
2014-03-30 09:15:41 +00:00
John Crispin
561a7ef93b lantiq: fix nand/ebu locking
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40310
2014-03-30 09:15:37 +00:00
John Crispin
d6a138141c lantiq: add tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40309
2014-03-30 09:15:33 +00:00
John Crispin
defdec0f3a lantiq: drop old svip folders
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40294
2014-03-27 13:34:56 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov
6e0fd6d518 lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
2014-02-15 22:54:34 +00:00
Luka Perkov
eddc327c7c lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
2014-02-15 22:54:32 +00:00
Gabor Juhos
a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
John Crispin
053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Luka Perkov
26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
John Crispin
f58b424c9e lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
2014-01-12 12:07:07 +00:00
Gabor Juhos
0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens
952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
John Crispin
776c6c50ce lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38884
2013-11-20 17:53:36 +00:00
John Crispin
d823c20f05 lantiq: update default mii modes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
2013-11-20 16:56:58 +00:00
John Crispin
06ada4b10f lantiq: fix an endless loop in the vmmc platform code
this was caused by not honoured error return codes of of_gpio_count()

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38878
2013-11-20 16:56:32 +00:00
John Crispin
000cefd85e lantiq: DGN3500 fixups
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
2013-11-11 13:15:08 +00:00
John Crispin
5139b2d996 lantiq: rename TDW8970 led adsl->dsl
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38730
2013-11-11 12:19:26 +00:00
John Crispin
dabdc6911a lantiq: update TDW8970.dts to support buttons properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38728
2013-11-11 12:19:18 +00:00
John Crispin
30fafd0617 lantiq: remove old hotplug handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38727
2013-11-11 12:19:15 +00:00
John Crispin
7ee1546ca3 lantiq: fix TDW8970 lan/wan mac
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38677
2013-11-07 12:46:24 +00:00
John Crispin
f198adc030 lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devices
The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.

Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38673
2013-11-07 12:46:08 +00:00
John Crispin
1a368e8616 lantiq: fix td-w8970 initramfs generation
https://dev.openwrt.org/ticket/14417

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38667
2013-11-07 12:45:44 +00:00
Gabor Juhos
35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos
b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens
81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
John Crispin
654dfb1784 lantiq: fix up diag.sh
init no longer exists as a parameter

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38342
2013-10-08 15:28:33 +00:00
John Crispin
715b62ebad lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
2013-10-07 15:03:00 +00:00
John Crispin
81fb43d2f1 lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
2013-10-07 15:02:56 +00:00
John Crispin
ae225124c6 lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
John Crispin
1398a5d849 lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
John Crispin
4f3797386f lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
2013-09-30 20:48:46 +00:00
Felix Fietkau
bff3637d24 lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38243
2013-09-27 21:12:08 +00:00
Gabor Juhos
9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Gabor Juhos
0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos
482b5f34e5 lantiq/3.10: unbreak the mtd-split patch
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
Luka Perkov
7665c57a72 lantiq: fix usb on sx76x
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 38083
2013-09-20 14:24:30 +00:00
Luka Perkov
d2ad87885d lantiq: style fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38051
2013-09-19 00:50:49 +00:00
Luka Perkov
43f1a47430 lantiq: add initial support for Siemens GIGASX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
2013-09-19 00:50:48 +00:00
Luka Perkov
3b33adeb99 lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
Luka Perkov
7d2c5682b9 lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
John Crispin
40ac8dd9df lantiq: fix FRITZ7320 flash window size
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38042
2013-09-18 16:31:45 +00:00
John Crispin
f9f73ef2ec lantiq: fix ath9k eeprom loading order bug
https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38041
2013-09-18 16:31:41 +00:00
John Crispin
8ff756cdc9 lantiq: fix up default firmware selection for spanish and italian routers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38039
2013-09-18 16:31:32 +00:00
John Crispin
1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin
cd668944ef lantiq: add wifi eep to a803 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
John Crispin
18b76c66fb lantiq: add a subtarget for the xrx200 SoC family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
2013-09-17 21:46:00 +00:00
John Crispin
0782501483 lantiq: update dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
John Crispin
94666dad1c lantiq: fix TD-W8970 image generation to work with the new tool
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
John Crispin
d13cbb04ad lantiq: add support for tplink images to .../image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
John Crispin
5001afdc37 lantiq: make the split patch recognize the tplink header
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
John Crispin
7f2eaac407 lantiq: fix TDW8970.dts commandline and partition name
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
John Crispin
e993e0c2cf lantiq: add tplink header id to sysupgrade and fix a comment
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
Luka Perkov
27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin
288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin
b4c722267e lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin
336c94c32d lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
2013-07-29 13:10:42 +00:00
John Crispin
c3b5ee96b9 lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
2013-07-29 13:10:37 +00:00
John Crispin
61e6be686f lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
2013-07-29 13:10:32 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
John Crispin
bfe65eaf7a lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
2013-07-25 20:54:51 +00:00
John Crispin
54b4074074 lantiq: add TP-Link TDW8970 image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
2013-07-25 20:29:24 +00:00
John Crispin
a2c5540727 lantiq: add profile for TP-Link TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
John Crispin
a99042c6a4 lantiq: add devicetree for TP-Link TDW8970
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
2013-07-25 20:29:15 +00:00
John Crispin
313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
2013-07-25 20:29:10 +00:00
John Crispin
a4d31c0353 lantiq: make macs loadable from mtd partitions
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
2013-07-25 20:29:05 +00:00
John Crispin
32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
John Crispin
4036be4408 lantiq: update pcie driver
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
2013-07-25 20:28:56 +00:00
Gabor Juhos
6a5b4ec7dc kernel: update 3.9 to 3.9.11
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
Felix Fietkau
fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
2013-07-15 11:06:07 +00:00
John Crispin
955662ec47 lantiq: apply [37258] also to the 3.9 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37317
2013-07-14 18:28:02 +00:00
John Crispin
93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
Luka Perkov
9de461f202 lantiq: etop enable gbit port0
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37191
2013-07-08 07:11:59 +00:00
Luka Perkov
1a3ad5a037 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
Luka Perkov
14b6674b39 lantiq: fix initramfs
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
John Crispin
fdfbac75c2 lantiq: xrx200_net compile fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37126
2013-07-02 09:34:45 +00:00
Jonas Gorski
0d9f760f27 kernel: update linux 3.9 to 3.9.8
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
John Crispin
124ef95f5f lantiq: add v3.9 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
John Crispin
bfc7007226 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
John Crispin
fe8ecbd972 lantiq: fix kernel config for DEU support
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
John Crispin
b4f36358ff lantiq: make xrx200 network driver use a tasklet for rx housekeeping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
John Crispin
aff84655f5 lantiq: remove 3.7 kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
John Crispin
44b1688e6c lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
John Crispin
5d441ae7ea lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
John Crispin
81c57ec131 lantiq: Fix ARV7518 DTS definitions
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
John Crispin
76c79f50d7 lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
John Crispin
7638caf35d lantiq: make kernel_oldconfig
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36900
2013-06-10 08:25:07 +00:00
John Crispin
f7daed8b9a lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
John Crispin
e9ef65175d lantiq: revert [36779] as it caused a regression
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
2013-05-31 13:25:07 +00:00
John Crispin
e60cb01c45 lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
The GPIO buttons of ARV752DPW are active low.

Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.

This fixes: https://dev.openwrt.org/ticket/12642

Signed-off-by: Rafael Gieschke <rafael@gieschke.de>

SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
John Crispin
c2b1e9eeef lantiq: Fix ar8216 switch configuration
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
John Crispin
090a75447b lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
John Crispin
d1f3751d05 lantiq: wifi calibration from MTD
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
John Crispin
83c3cd4ed9 lantiq: postpone PCI and wifi init
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
John Crispin
b585923cc9 lantiq: fix LED-handling oversights
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Jonas Gorski
526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
John Crispin
eb10f052ce lantiq: enable portmaps again and set max port to 2
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36573
2013-05-07 10:58:52 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
John Crispin
b42a173664 lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
John Crispin
520bf46375 lantiq: fix board detection helpers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
John Crispin
9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
John Crispin
d3d18ae812 lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
John Crispin
a46acc80e4 lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
John Crispin
46306c2e47 lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
John Crispin
d5f87e193c add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
John Crispin
fbc1e3732b add FE phy firmware
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
John Crispin
0d32469457 add missing pinmux patch
Fix lantiq pinmux which affected PCI and USB.

Known affected boards are: ARV4518 and ARV7518.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
John Crispin
d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin
a4c745ee74 add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
John Crispin
4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
John Crispin
0dbe4f502d fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
John Crispin
9b4a8c6d1e select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
John Crispin
0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
John Crispin
5452dbad61 build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
John Crispin
b98ae2b149 bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
John Crispin
3ab75692f3 move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
John Crispin
48a4b3a0cd fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
John Crispin
e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin
0b881eea72 unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
Gabor Juhos
23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Gabor Juhos
3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
2013-02-04 10:02:56 +00:00
Gabor Juhos
562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin
a0f7a3c214 dont load gptu on ase
fixes #12792

SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
John Crispin
0de0955931 refresh patches
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
John Crispin
0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin
3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin
5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
Felix Fietkau
ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Gabor Juhos
15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos
0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Gabor Juhos
c19c30cefd kernel: update linux 3.7 to 3.7.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
John Crispin
64910f4490 fixes USB reset on ARV7518
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
John Crispin
4834d09a3f fixes none-pci build
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
John Crispin
624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
John Crispin
ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
John Crispin
efe3225e2b ar9 did not load atm driver properly
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
John Crispin
379cd6e25e dont use input layer for gpio buttons
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
John Crispin
90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin
ae0b9ff1ce Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143)
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
John Crispin
9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin
3134205dfd minor tweaks to WBMR image
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
John Crispin
f4b2439554 add missing PHY_BASIC_FEATURES to 100mbit phys
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
John Crispin
861bf6af49 fix typo inside fritz3370 devicetree file
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
John Crispin
54c096527a more devicetree fixes
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
John Crispin
59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
John Crispin
7ce4c81647 add phy-reset gpio handling to xrx200-net
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
John Crispin
42d668174e add more lantiq phy ids based on daniels uboot code
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
John Crispin
16c5946f8b refresh patch and install v1.1 gphy blobs
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
John Crispin
1b0aaff246 adds a fix for ar8216 mii detection on etop driver
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
John Crispin
687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin
e472671bde fix gptu clocks
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
John Crispin
5495ffbfdf more board file fixes
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
John Crispin
4aa8272c8b fix gptu patch - tapi should now load
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
John Crispin
af48676b28 update to 3.7.1
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
John Crispin
7bcb6b5479 make pinctrl-falcon honour status="disbaled";
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
John Crispin
573cf13419 fix falcon profile
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
John Crispin
33d3433d75 fix i2c-lantiq module
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
John Crispin
b637eb598d add falcon devicetree files
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
John Crispin
3ca51b5399 select hcd as a default package for the dgn3500
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
John Crispin
85e4da7e23 EASY80920 has 2 usb ports
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
John Crispin
3dac521a49 remove 3.3 and 3.6
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
John Crispin
1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
John Crispin
601bc28669 clean up modules.mk
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
John Crispin
2c33df0376 add devicetrees
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
John Crispin
3a948770cf add linux-v3.7
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
John Crispin
f7ead0a2d5 adds proper package selection for dgn3500
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
John Crispin
3b419e506c fixes ar9 / dgn3500 support
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
John Crispin
71ddec8091 add more profiles
SVN-Revision: 34131
2012-11-09 19:26:58 +00:00
John Crispin
88e4d93802 a few more dts files (WIP)
SVN-Revision: 34130
2012-11-09 19:26:43 +00:00
John Crispin
a30b3066ce add mtd split and atm patch
SVN-Revision: 34129
2012-11-09 19:26:30 +00:00
John Crispin
7404e59bbd add OWRTDTB marker patch
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
John Crispin
3a1851964e add support for arv7525
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
Gabor Juhos
e8669729bc kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
John Crispin
05fbb370dc 3.6 is not the default yet
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
John Crispin
a9ad36b7f1 adds dts files and make devicetree images buildable
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
John Crispin
c8ae6dac56 update ase target for 3.6
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
John Crispin
dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
John Crispin
dd619da4fc adds 3.6 files, patches and config
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
John Crispin
736835343c move files/ -> files-3.3/
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
John Crispin
fa316620a7 prepare Makefile for 3.6
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
John Crispin
6993e19532 drop GPIODEV platform code
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
John Crispin
9dc218f88f tapi was not registeredproperly for most arcadyan boards
SVN-Revision: 33591
2012-09-28 20:57:06 +00:00
Gabor Juhos
43147ffec5 generic: move GENERIC_PWM symbol into the generic config
SVN-Revision: 33383
2012-09-13 06:38:31 +00:00
Luka Perkov
4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
John Crispin
64b385dda7 pci gpio mapping
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
2012-08-08 12:14:43 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
John Crispin
060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
John Crispin
f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
John Crispin
5178c177dc rebase config-3.3
SVN-Revision: 32797
2012-07-24 17:28:25 +00:00
John Crispin
48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
This broke falcon builds

SVN-Revision: 32794
2012-07-24 15:33:01 +00:00
John Crispin
95e69ac4f1 clean up generic image building
SVN-Revision: 32065
2012-06-05 17:49:42 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov
7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
John Crispin
2b4ef2eafa adds unset Kbuild symbol
SVN-Revision: 32026
2012-06-02 14:03:32 +00:00
John Crispin
47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Gabor Juhos
ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
John Crispin
f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin
8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin
81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin
6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin
3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Felix Fietkau
9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
John Crispin
364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin
9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin
c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
John Crispin
dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin
75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin
7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Felix Fietkau
0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
John Crispin
d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Mirko Vogt
87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski
ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
John Crispin
83948d6385 adds 3.3 patches and files
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
John Crispin
e3889bcf7c update 3.2 patches
sync with lantiq kernel series

SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
John Crispin
da3f3f8f9d add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
John Crispin
94af65db49 enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Felix Fietkau
5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
John Crispin
b982e8166b cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
John Crispin
5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin
f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin
ba4a7fca7b update profiles
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
John Crispin
0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Jonas Gorski
fab5be9b4f lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
John Crispin
e5798d7c9b fixes etop locking issue
SVN-Revision: 30689
2012-02-23 07:42:00 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin
7416a5f0aa fix compile error in previous commit
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
John Crispin
0b07769898 fixes irq locking in ethernet driver
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c fixes gpio_export patch
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Jonas Gorski
1015fab0d7 kernel: update linux 3.1 to 3.1.10
SVN-Revision: 29966
2012-01-31 09:43:57 +00:00
John Crispin
49eb3fd845 gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
Jonas Gorski
c560444a58 kernel: update linux 3.1 to 3.1.9
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
Jonas Gorski
e33bb9ec66 linux: update 3.1 to 3.1.4
SVN-Revision: 29470
2011-12-06 19:50:30 +00:00
John Crispin
bf7316424c lantiq: bump to 3.1.3
SVN-Revision: 29348
2011-11-28 10:22:58 +00:00
John Crispin
9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
2011-11-23 12:22:15 +00:00
John Crispin
4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
John Crispin
bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin
79a4642b40 lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin
5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin
d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin
4248705108 lantiq: cleanup default package selection
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
John Crispin
eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
John Crispin
fda4ee22a0 lantiq: improve falcon package selection
SVN-Revision: 28962
2011-11-11 21:59:11 +00:00
John Crispin
e1dc73be90 lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
2011-11-11 21:59:01 +00:00
John Crispin
95d36d3efe lantiq: remove obseleted folder. we use 3.1 now
SVN-Revision: 28728
2011-11-03 16:33:27 +00:00
John Crispin
ea36ad76bc lantiq: bump to 3.1
SVN-Revision: 28721
2011-11-03 15:15:52 +00:00
John Crispin
0a866293bd * update patches to 3.0
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
2011-10-10 15:13:46 +00:00
John Crispin
aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code.
SVN-Revision: 28310
2011-09-26 10:35:51 +00:00
John Crispin
1ef8066bff * remove obseleted m25p80 patch
SVN-Revision: 28309
2011-09-26 09:36:02 +00:00
John Crispin
cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches
SVN-Revision: 28308
2011-09-26 09:35:02 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
John Crispin
8acc276692 sync default kernel config for lantiq danube/ar9
SVN-Revision: 27697
2011-07-19 18:08:09 +00:00
John Crispin
500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
2011-07-19 18:06:52 +00:00
John Crispin
78a9b1a2ad fixes pci on lantiq AR9 SoC
SVN-Revision: 27695
2011-07-19 18:06:42 +00:00
John Crispin
3833b7be24 add support for more lantiq AR9 boards
SVN-Revision: 27694
2011-07-19 18:06:33 +00:00
John Crispin
6b8c119b41 * fix external interrupts
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
John Crispin
5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
John Crispin
7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin
d7732885ed adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
John Crispin
b75a8fb532 fix up falcon kernel config
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
John Crispin
036df9f088 fix i2c-falcon kmod package selection
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
John Crispin
a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin
dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin
3c1079a7a7 add ar9 specific profile
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
John Crispin
09d547eae4 rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
John Crispin
f177052c9d remove ar9 board from xway profiles
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
John Crispin
dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
John Crispin
a674aabe54 get ready for 3.0
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
John Crispin
d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
John Crispin
29653782a9 set DEFAULT_SUBTARGET for lantiq/
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
John Crispin
04fefa4a28 fix broken falcon patches from last night
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
John Crispin
0a8430bfab use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
John Crispin
058eca0b3b automatic subtarget enumaration
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
John Crispin
43771202d3 update lantiq/falcon patches
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
John Crispin
d43cbe24a5 fix description for lantiq target
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
John Crispin
0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
2011-06-13 22:37:23 +00:00
John Crispin
fa59bb0958 * move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
2011-06-12 08:56:26 +00:00
John Crispin
ed0e649a5b * fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
2011-06-08 17:57:55 +00:00
Florian Fainelli
763b58c30c update to 2.6.39.1
patch from Peter Wagner

SVN-Revision: 27104
2011-06-04 13:35:55 +00:00
Mirko Vogt
ba5b3ece5d purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them
SVN-Revision: 27036
2011-05-31 09:47:30 +00:00
John Crispin
6608f419d1 * backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch

SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
John Crispin
ba4dd89063 remove unknown package names from DEFAULT:=
SVN-Revision: 26403
2011-04-02 12:56:11 +00:00
John Crispin
628a47642c * adds spi driver, thx daniel
SVN-Revision: 26355
2011-03-29 07:10:50 +00:00
John Crispin
ff885fde8e * fix ARV7518PW support
SVN-Revision: 26354
2011-03-29 06:20:00 +00:00
John Crispin
08bb107823 * use netif_rx of the phydev if it is provided
SVN-Revision: 26353
2011-03-29 06:19:31 +00:00
John Crispin
5b0f2fb918 * shrink the memory window of the wdt
SVN-Revision: 26352
2011-03-29 05:18:08 +00:00
Felix Fietkau
335877a2b3 global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
SVN-Revision: 26300
2011-03-26 01:07:12 +00:00
Imre Kaloz
b8430e7427 update to 2.6.32.33 and 2.6.37.4
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
John Crispin
ba3251a90d * fixes arv4510 board support * fixes nor swizzle hack * fixes gpio .can_sleep * fixes compile warning inside pci driver
SVN-Revision: 26157
2011-03-14 07:33:23 +00:00
Felix Fietkau
1faf243c73 lantiq: add missing #include for the falcon i2c driver
SVN-Revision: 26152
2011-03-13 22:39:16 +00:00
Hauke Mehrtens
4226f1d373 kernel: update to kernel version 2.6.37.3
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00
John Crispin
c75b0ca1a8 * update kernel to .37 * add support for falcon (big thank you goes to lantiq !!)
SVN-Revision: 26021
2011-03-11 08:19:53 +00:00
Florian Fainelli
31709b2c76 update to 2.6.35.11
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
John Crispin
34e5998921 * fixes dwc_otg init when power gpio is set to -1
SVN-Revision: 25521
2011-02-13 16:01:07 +00:00
John Crispin
2268dfafd3 * adds ath5k platform support * adds several new profiles
SVN-Revision: 25367
2011-02-04 22:49:52 +00:00
John Crispin
752dcaeaf4 * fixes old ifxmips in header file * pass default ebu value to gpio driver
SVN-Revision: 25366
2011-02-04 22:48:53 +00:00
John Crispin
f394bbbcaa * fix usb compile warnings * fix timer header file which broke compile of external tapi driver * rebase patch
SVN-Revision: 25344
2011-02-03 17:34:55 +00:00
John Crispin
1e89df511a * adds profiles to the kernel * fixes 2 compile errors in the usb driver * ioports were not allocated properly
SVN-Revision: 25278
2011-02-01 14:37:35 +00:00
John Crispin
a15b4bf6fc * adds arv4518pw mach support * fixes arv4525pw * make sure all mach names have the same style * move code around
SVN-Revision: 25075
2011-01-23 19:16:33 +00:00
John Crispin
a8819fd220 adds machtype for ARV7518PW
SVN-Revision: 25074
2011-01-23 12:51:15 +00:00
John Crispin
699f5c8729 remove deadcode from [25072]
SVN-Revision: 25073
2011-01-23 12:12:23 +00:00
John Crispin
7c9e1370e9 * fix pci support for more than 1 device * fixes ioport mappings * adds support for arcor easybox 803/arv752DWP22 * gpio direction was not set properly during a gpio_request() * usb compile warning
bugfix, cleanup,

SVN-Revision: 25072
2011-01-23 12:08:44 +00:00
John Crispin
4d465f4036 * revert [25002] * fixes EBU ack when EBU causes an irq
SVN-Revision: 25047
2011-01-19 15:56:27 +00:00
Mirko Vogt
63aeef20c0 move irq.c from patch into own file
SVN-Revision: 25002
2011-01-15 03:32:16 +00:00
John Crispin
1d6fbd2e85 * fixes duplicate registration of dwc_otg usb core
SVN-Revision: 24738
2010-12-20 17:56:09 +00:00
John Crispin
5e3e1d4a02 * make the usb gpio configurable * 105-header_xway.patch has a corrupt line count in it
SVN-Revision: 24564
2010-12-14 13:02:49 +00:00
John Crispin
9f47e80bb3 adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00