update to 2.6.39.1

patch from Peter Wagner

SVN-Revision: 27104
This commit is contained in:
Florian Fainelli 2011-06-04 13:35:55 +00:00
parent 3715fa33fe
commit 763b58c30c
42 changed files with 112 additions and 199 deletions

View file

@ -26,8 +26,8 @@ endif
ifeq ($(LINUX_VERSION),2.6.38.6)
LINUX_KERNEL_MD5SUM:=e896a3bb3185b8a8af8e2f010f63c02e
endif
ifeq ($(LINUX_VERSION),2.6.39)
LINUX_KERNEL_MD5SUM:=1aab7a741abe08d42e8eccf20de61e05
ifeq ($(LINUX_VERSION),2.6.39.1)
LINUX_KERNEL_MD5SUM:=983834b0138e102a3fb0098367c17150
endif
# disable the md5sum check for unknown kernel versions

View file

@ -13,7 +13,7 @@ FEATURES:=jffs2 usb pci
SUBTARGETS=au1500 au1550
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
LINUX_VERSION:=2.6.39
LINUX_VERSION:=2.6.39.1
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini yamonenv

View file

@ -1,6 +1,6 @@
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
@@ -92,7 +92,7 @@ static struct platform_device mtx1_gpio_
static struct mtd_partition mtx1_mtd_partitions[] = {
{

View file

@ -1,6 +1,6 @@
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -995,10 +995,14 @@ static void au1000_multicast_list(struct
@@ -993,10 +993,14 @@ static void au1000_multicast_list(struct
writel(reg, &aup->mac->control);
}

View file

@ -13,7 +13,7 @@ FEATURES:=squashfs fpu gpio
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
LINUX_VERSION:=2.6.39
LINUX_VERSION:=2.6.39.1
include $(INCLUDE_DIR)/target.mk

View file

@ -1,6 +1,6 @@
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
@@ -619,7 +619,8 @@ static void concat_sync(struct mtd_info
for (i = 0; i < concat->num_subdev; i++) {
struct mtd_info *subdev = concat->subdev[i];

View file

@ -1,6 +1,6 @@
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2730,6 +2730,16 @@ out:
@@ -2731,6 +2731,16 @@ out:
/* common code */
@ -17,7 +17,7 @@
/**
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
@@ -2807,10 +2817,7 @@ int shmem_zero_setup(struct vm_area_stru
@@ -2808,10 +2818,7 @@ int shmem_zero_setup(struct vm_area_stru
if (IS_ERR(file))
return PTR_ERR(file);

View file

@ -12,8 +12,7 @@ BOARDNAME:=Lantiq GPON/XWAY
FEATURES:=squashfs jffs2
SUBTARGETS:=falcon xway ase
LINUX_VERSION:=2.6.39
#LINUX_VERSION:=2.6.32.33
LINUX_VERSION:=2.6.39.1
CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves

View file

@ -48,7 +48,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -212,6 +212,23 @@
@@ -212,6 +212,23 @@ config MACH_JZ4740
select HAVE_PWM
select HAVE_CLK
@ -884,7 +884,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+}
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@
@@ -11,6 +11,7 @@ platforms += dec
platforms += emma
platforms += jazz
platforms += jz4740

View file

@ -65,7 +65,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -760,6 +760,7 @@
@@ -760,6 +760,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"

View file

@ -28,9 +28,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/pci/pci-lantiq.c
create mode 100644 arch/mips/pci/pci-lantiq.h
diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
new file mode 100644
index 0000000..1f1dba6
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
@@ -0,0 +1,46 @@
@ -80,11 +77,9 @@ index 0000000..1f1dba6
+};
+
+#endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index f0d5329..4df8799 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
@ -92,9 +87,6 @@ index f0d5329..4df8799 100644
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
new file mode 100644
index 0000000..1f2afb5
--- /dev/null
+++ b/arch/mips/pci/ops-lantiq.c
@@ -0,0 +1,116 @@
@ -214,9 +206,6 @@ index 0000000..1f2afb5
+
+ return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
new file mode 100644
index 0000000..603d749
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.c
@@ -0,0 +1,297 @@
@ -517,9 +506,6 @@ index 0000000..603d749
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
new file mode 100644
index 0000000..66bf6cd
--- /dev/null
+++ b/arch/mips/pci/pci-lantiq.h
@@ -0,0 +1,18 @@
@ -541,6 +527,3 @@ index 0000000..66bf6cd
+ unsigned int devfn, int where, int size, u32 val);
+
+#endif
--
1.7.2.3

View file

@ -24,7 +24,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -260,6 +260,13 @@
@@ -260,6 +260,13 @@ config MTD_BCM963XX
Support for parsing CFE image tag and creating MTD partitions on
Broadcom BCM63xx boards.
@ -40,7 +40,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -60,3 +60,4 @@
@@ -60,3 +60,4 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o

View file

@ -25,8 +25,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/lantiq/xway/devices.c
create mode 100644 arch/mips/lantiq/xway/devices.h
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
index a268391..e5dae0e 100644
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -4,7 +4,7 @@
@ -38,9 +36,6 @@ index a268391..e5dae0e 100644
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
new file mode 100644
index 0000000..7b82c34
--- /dev/null
+++ b/arch/mips/lantiq/devices.c
@@ -0,0 +1,122 @@
@ -166,9 +161,6 @@ index 0000000..7b82c34
+ pr_err("kernel is compiled without PCI support\n");
+}
+#endif
diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
new file mode 100644
index 0000000..2947bb1
--- /dev/null
+++ b/arch/mips/lantiq/devices.h
@@ -0,0 +1,23 @@
@ -195,8 +187,6 @@ index 0000000..2947bb1
+extern void ltq_register_pci(struct ltq_pci_data *data);
+
+#endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 9c85ff9..74ce438 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,4 +1,4 @@
@ -205,9 +195,6 @@ index 9c85ff9..74ce438 100644
obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
new file mode 100644
index 0000000..a71b3b5
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.c
@@ -0,0 +1,98 @@
@ -309,9 +296,6 @@ index 0000000..a71b3b5
+ platform_device_register_simple("ltq_asc", 0,
+ ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
+}
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
new file mode 100644
index 0000000..51f56b5
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.h
@@ -0,0 +1,18 @@
@ -333,6 +317,3 @@ index 0000000..51f56b5
+extern void ltq_register_ase_asc(void);
+
+#endif
--
1.7.2.3

View file

@ -27,7 +27,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -190,6 +190,7 @@
@@ -228,6 +228,7 @@ config LANTIQ
select SWAP_IO_SPACE
select BOOT_RAW
select HAVE_CLK
@ -58,7 +58,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+#endif
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -20,5 +20,6 @@
@@ -20,5 +20,6 @@ struct ltq_soc_info {
};
extern void ltq_soc_detect(struct ltq_soc_info *i);
@ -80,7 +80,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
void __init plat_mem_setup(void)
{
/* assume 16M as default incase uboot fails to pass proper ramsize */
@@ -32,10 +38,32 @@
@@ -32,10 +38,32 @@ void __init plat_mem_setup(void)
if (!strncmp(e, "memsize=", 8)) {
e += 8;
if (strict_strtoul(e, 0, &memsize))

View file

@ -24,8 +24,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/lantiq/xway/mach-easy50601.c
create mode 100644 arch/mips/lantiq/xway/mach-easy50712.c
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 2780461..3fccf21 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -18,4 +18,6 @@ config SOC_XWAY
@ -35,8 +33,6 @@ index 2780461..3fccf21 100644
+source "arch/mips/lantiq/xway/Kconfig"
+
endif
diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
index ffcacfc..7e01b8c 100644
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
@@ -13,6 +13,8 @@
@ -48,9 +44,6 @@ index ffcacfc..7e01b8c 100644
};
#endif
diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
new file mode 100644
index 0000000..2b857de
--- /dev/null
+++ b/arch/mips/lantiq/xway/Kconfig
@@ -0,0 +1,23 @@
@ -77,20 +70,15 @@ index 0000000..2b857de
+endmenu
+
+endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 8c06a97..b1d3640 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devices.o
@@ -2,3 +2,6 @@ obj-y := pmu.o ebu.o reset.o gpio.o devi
obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
+
+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
new file mode 100644
index 0000000..d5aaf63
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
@@ -0,0 +1,57 @@
@ -151,9 +139,6 @@ index 0000000..d5aaf63
+ "EASY50601",
+ "EASY50601 Eval Board",
+ easy50601_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
new file mode 100644
index 0000000..e5e7e09
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -0,0 +1,68 @@
@ -225,6 +210,3 @@ index 0000000..e5e7e09
+ "EASY50712",
+ "EASY50712 Eval Board",
+ easy50712_init);
--
1.7.2.3

View file

@ -20,8 +20,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/lantiq/xway/gpio_ebu.c
create mode 100644 arch/mips/lantiq/xway/gpio_stp.c
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index b1d3640..6b5e07e 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,4 +1,4 @@
@ -30,9 +28,6 @@ index b1d3640..6b5e07e 100644
obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
new file mode 100644
index 0000000..a479355
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -0,0 +1,126 @@
@ -162,9 +157,6 @@ index 0000000..a479355
+}
+
+postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
new file mode 100644
index 0000000..67d59d6
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -0,0 +1,157 @@
@ -325,6 +317,3 @@ index 0000000..67d59d6
+}
+
+postcore_initcall(ltq_stp_init);
--
1.7.2.3

View file

@ -780,7 +780,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+MODULE_LICENSE("GPL");
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1391,6 +1391,14 @@
@@ -1391,6 +1391,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONS
help
Support for Console on the NWP serial ports.
@ -797,7 +797,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
depends on QUICC_ENGINE
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,4 @@
@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x6
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o

View file

@ -21,8 +21,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
create mode 100644 arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
create mode 100644 arch/mips/lantiq/xway/dma.c
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index 343e82c..4827afb 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -86,7 +86,8 @@
@ -35,9 +33,6 @@ index 343e82c..4827afb 100644
/* PCI */
#define PCI_CR_BASE_ADDR 0x1E105400
diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
new file mode 100644
index 0000000..872943a
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h
@@ -0,0 +1,60 @@
@ -101,8 +96,6 @@ index 0000000..872943a
+extern void ltq_dma_init_port(int p);
+
+#endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 6b5e07e..c517f2e 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,4 +1,4 @@
@ -111,8 +104,6 @@ index 6b5e07e..c517f2e 100644
obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
index 51f56b5..d573084 100644
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
@@ -10,6 +10,7 @@
@ -123,9 +114,6 @@ index 51f56b5..d573084 100644
extern void ltq_register_gpio(void);
extern void ltq_register_gpio_stp(void);
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
new file mode 100644
index 0000000..4278a45
--- /dev/null
+++ b/arch/mips/lantiq/xway/dma.c
@@ -0,0 +1,253 @@
@ -382,6 +370,3 @@ index 0000000..4278a45
+}
+
+postcore_initcall(ltq_dma_init);
--
1.7.2.3

View file

@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
/* struct used to pass info to the pci core */
enum {
@@ -43,4 +44,10 @@
@@ -43,4 +44,10 @@ struct ltq_pci_data {
int irq[16];
};
@ -62,7 +62,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
#define LTQ_DMA_BASE_ADDR 0x1E104100
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -96,3 +96,26 @@
@@ -96,3 +96,26 @@ void __init ltq_register_ase_asc(void)
platform_device_register_simple("ltq_asc", 0,
ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
}
@ -100,7 +100,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
#endif
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2017,6 +2017,13 @@
@@ -2017,6 +2017,13 @@ config FTMAC100
from Faraday. It is used on Faraday A320, Andes AG101 and some
other ARM/NDS32 SoC's.
@ -116,7 +116,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
source "drivers/net/octeon/Kconfig"
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -259,6 +259,7 @@
@@ -259,6 +259,7 @@ obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_GRETH) += greth.o

View file

@ -16,8 +16,6 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/lantiq/xway/mach-easy50712.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
index e5e7e09..ea5027b 100644
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -12,6 +12,7 @@
@ -28,7 +26,7 @@ index e5e7e09..ea5027b 100644
#include <lantiq_soc.h>
#include <irq.h>
@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data = {
@@ -55,11 +56,16 @@ static struct ltq_pci_data ltq_pci_data
},
};
@ -45,6 +43,3 @@ index e5e7e09..ea5027b 100644
}
MIPS_MACHINE(LTQ_MACH_EASY50712,
--
1.7.2.3

View file

@ -21,7 +21,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -990,6 +990,12 @@
@@ -990,6 +990,12 @@ config BCM63XX_WDT
To compile this driver as a loadable module, choose M here.
The module will be called bcm63xx_wdt.
@ -36,7 +36,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -123,6 +123,7 @@
@@ -123,6 +123,7 @@ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o

View file

@ -1694,7 +1694,7 @@
+#endif
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -16,8 +16,12 @@
@@ -16,8 +16,12 @@ config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
select HW_HAS_PCI
@ -1709,21 +1709,21 @@
endif
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
@@ -9,3 +9,4 @@
@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devi
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+obj-$(CONFIG_SOC_FALCON) += falcon/
--- a/arch/mips/lantiq/Platform
+++ b/arch/mips/lantiq/Platform
@@ -6,3 +6,4 @@
@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ) += lantiq/
cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq
load-$(CONFIG_LANTIQ) = 0xffffffff80002000
cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
+cflags-$(CONFIG_SOC_FALCON) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
@@ -15,6 +15,11 @@
@@ -15,6 +15,11 @@ enum lantiq_mach_type {
LTQ_MACH_GENERIC = 0,
LTQ_MACH_EASY50712, /* Danube evaluation board */
LTQ_MACH_EASY50601, /* Amazon SE evaluation board */

View file

@ -1,16 +1,15 @@
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -74,6 +74,7 @@
@@ -82,5 +82,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
+obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o
ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
EXTRA_CFLAGS += -DDEBUG
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -278,6 +278,10 @@
@@ -282,6 +282,10 @@ config I2C_POWERMAC
comment "I2C system bus drivers (mostly embedded / system-on-chip)"

View file

@ -1,6 +1,6 @@
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -55,6 +55,7 @@
@@ -55,6 +55,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.
obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
@ -484,7 +484,7 @@
+MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -210,6 +210,10 @@
@@ -210,6 +210,10 @@ config SPI_MPC52xx
This drivers supports the MPC52xx SPI controller in master SPI
mode.

View file

@ -100,7 +100,7 @@
+ easy98020_init);
--- a/arch/mips/lantiq/falcon/Kconfig
+++ b/arch/mips/lantiq/falcon/Kconfig
@@ -6,6 +6,10 @@
@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY98000
bool "Easy98000"
default y
@ -113,7 +113,7 @@
endif
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -2,3 +2,4 @@
@@ -2,3 +2,4 @@ obj-y := clk-falcon.o devices.o gpio.o p
obj-y += softdog_vpe.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o

View file

@ -106,7 +106,7 @@
+ board_95C3AM1_init);
--- a/arch/mips/lantiq/falcon/Kconfig
+++ b/arch/mips/lantiq/falcon/Kconfig
@@ -10,6 +10,10 @@
@@ -10,6 +10,10 @@ config LANTIQ_MACH_EASY98020
bool "Easy98020"
default y
@ -119,14 +119,14 @@
endif
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -3,3 +3,4 @@
@@ -3,3 +3,4 @@ obj-y += softdog_vpe.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
+obj-$(CONFIG_LANTIQ_MACH_95C3AM1) += mach-95C3AM1.o
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
@@ -20,6 +20,7 @@
@@ -20,6 +20,7 @@ enum lantiq_mach_type {
LANTIQ_MACH_EASY98000, /* Falcon Eval Board, NOR Flash */
LANTIQ_MACH_EASY98000SF, /* Falcon Eval Board, Serial Flash */
LANTIQ_MACH_EASY98020, /* Falcon Reference Board */

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/Kconfig
+++ b/arch/mips/lantiq/xway/Kconfig
@@ -6,6 +6,10 @@
@@ -6,6 +6,10 @@ config LANTIQ_MACH_EASY50712
bool "Easy50712 - Danube"
default y
@ -13,7 +13,7 @@
endif
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -5,3 +5,4 @@
@@ -5,3 +5,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
@ -527,7 +527,7 @@
+ arv752dpw22_init);
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
@@ -21,6 +21,17 @@
@@ -21,6 +21,17 @@ enum lantiq_mach_type {
LANTIQ_MACH_EASY98000SF, /* Falcon Eval Board, Serial Flash */
LANTIQ_MACH_EASY98020, /* Falcon Reference Board */
LANTIQ_MACH_95C3AM1, /* Board 95C3AM1 */

View file

@ -1,6 +1,6 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -63,6 +63,10 @@
@@ -57,6 +57,10 @@ config MTD_ROOTFS_SPLIT
depends on MTD_PARTITIONS
default y
@ -10,10 +10,10 @@
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
---help---
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -724,6 +724,82 @@
@@ -860,6 +860,82 @@ static int refresh_rootfs_split(struct m
}
#endif /* CONFIG_MTD_ROOTFS_SPLIT */
@ -96,9 +96,9 @@
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
@@ -748,6 +824,17 @@
if (!slave)
return -ENOMEM;
@@ -893,6 +969,17 @@ int add_mtd_partitions(struct mtd_info *
add_mtd_device(&slave->mtd);
+#ifdef CONFIG_MTD_UIMAGE_SPLIT
+ if (!strcmp(parts[i].name, "linux")) {

View file

@ -1,6 +1,6 @@
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -52,6 +52,8 @@
@@ -52,6 +52,8 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
@ -11,7 +11,7 @@
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
@@ -154,7 +154,7 @@
@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
static const char *const class_name[] = {
@ -22,7 +22,7 @@
"???", "5", "???", "???", /* 4- 7 */
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -62,11 +62,17 @@
@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
write_unlock_irq(&vcc_sklist_lock);
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -39,6 +39,34 @@
@@ -39,6 +39,34 @@ void prom_free_prom_memory(void)
{
}
@ -35,7 +35,7 @@
static void __init prom_init_cmdline(void)
{
int argc = fw_arg0;
@@ -53,6 +81,7 @@
@@ -53,6 +81,7 @@ static void __init prom_init_cmdline(voi
strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
}
}

View file

@ -249,7 +249,7 @@
+#endif /* CONFIG_IFX_UDP_REDIRECT* */
--- a/net/ipv4/Makefile
+++ b/net/ipv4/Makefile
@@ -14,6 +14,9 @@
@@ -14,6 +14,9 @@ obj-y := route.o inetpeer.o protocol
inet_fragment.o
obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
@ -272,7 +272,7 @@
struct udp_table udp_table __read_mostly;
EXPORT_SYMBOL(udp_table);
@@ -802,7 +806,7 @@
@@ -802,7 +806,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
u8 tos;
int err, is_udplite = IS_UDPLITE(sk);
int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
@ -281,7 +281,7 @@
struct sk_buff *skb;
if (len > 0xFFFF)
@@ -818,7 +822,13 @@
@@ -818,7 +822,13 @@ int udp_sendmsg(struct kiocb *iocb, stru
ipc.opt = NULL;
ipc.tx_flags = 0;
@ -296,7 +296,7 @@
if (up->pending) {
/*
@@ -1608,6 +1618,7 @@
@@ -1608,6 +1618,7 @@ int __udp4_lib_rcv(struct sk_buff *skb,
struct rtable *rt = skb_rtable(skb);
__be32 saddr, daddr;
struct net *net = dev_net(skb->dev);
@ -304,7 +304,7 @@
/*
* Validate the packet.
@@ -1640,7 +1651,16 @@
@@ -1640,7 +1651,16 @@ int __udp4_lib_rcv(struct sk_buff *skb,
sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
if (sk != NULL) {
@ -322,7 +322,7 @@
sock_put(sk);
/* a return value > 0 means to resubmit the input, but
@@ -1937,7 +1957,7 @@
@@ -1937,7 +1957,7 @@ struct proto udp_prot = {
.clear_sk = sk_prot_clear_portaddr_nulls,
};
EXPORT_SYMBOL(udp_prot);
@ -333,7 +333,7 @@
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -72,6 +72,12 @@
@@ -72,6 +72,12 @@ config INET
Short answer: say Y.

View file

@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1871,6 +1871,28 @@
@@ -1871,6 +1871,28 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
@ -110,7 +110,7 @@
/* TCStatus fields (per TC) */
#define TCSTATUS_TASID (_ULCAST_(0xff))
#define TCSTATUS_IXMT_SHIFT 10
@@ -350,6 +390,14 @@
@@ -350,6 +390,14 @@ do { \
#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
#define read_vpe_c0_vpeconf0() mftc0(1, 2)
#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
@ -125,7 +125,7 @@
#define read_vpe_c0_count() mftc0(9, 0)
#define write_vpe_c0_count(val) mttc0(9, 0, val)
#define read_vpe_c0_status() mftc0(12, 0)
@@ -381,6 +429,12 @@
@@ -381,6 +429,12 @@ do { \
#define write_tc_c0_tchalt(val) mttc0(2, 4, val)
#define read_tc_c0_tccontext() mftc0(2, 5)
#define write_tc_c0_tccontext(val) mttc0(2, 5, val)
@ -140,7 +140,7 @@
#define read_tc_gpr_sp() mftgpr(29)
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -85,7 +85,8 @@
@@ -85,7 +85,8 @@ obj-$(CONFIG_MIPS32_O32) += binfmt_elfo3
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PROC_FS) += proc.o
@ -254,7 +254,7 @@
/*
* Dump new MIPS MT state for the core. Does not leave TCs halted.
@@ -78,18 +148,18 @@
@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpct
if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
printk(" VPE %d\n", i);
printk(" VPEControl : %08lx\n",
@ -280,7 +280,7 @@
break; /* Next VPE */
}
}
@@ -287,6 +357,9 @@
@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
printk("Mapped %ld ITC cells starting at 0x%08x\n",
((itcblkgrn & 0x7fe00000) >> 20), itc_base);
}
@ -300,7 +300,7 @@
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -110,3 +111,19 @@
@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op =
.stop = c_stop,
.show = show_cpuinfo,
};
@ -322,7 +322,7 @@
+}
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1334,6 +1334,13 @@
@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_
asid = asid_cache(cpu);
do {
@ -338,7 +338,7 @@
flush_icache_all();
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -76,6 +76,58 @@
@@ -76,6 +76,58 @@ static struct kspd_notifications kspd_ev
static int kspd_events_reqd;
#endif
@ -397,7 +397,7 @@
/* grab the likely amount of memory we will need. */
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
#define P_SIZE (2 * 1024 * 1024)
@@ -268,6 +320,13 @@
@@ -268,6 +320,13 @@ static void *alloc_progmem(unsigned long
void *addr;
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
@ -411,7 +411,7 @@
/*
* This means you must tell Linux to use less memory than you
* physically have, for example by passing a mem= boot argument.
@@ -746,6 +805,12 @@
@@ -746,6 +805,12 @@ static int vpe_run(struct vpe * v)
}
/* Write the address we want it to start running from in the TCPC register. */
@ -424,7 +424,7 @@
write_tc_c0_tcrestart((unsigned long)v->__start);
write_tc_c0_tccontext((unsigned long)0);
@@ -759,6 +824,20 @@
@@ -759,6 +824,20 @@ static int vpe_run(struct vpe * v)
write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
@ -445,7 +445,7 @@
/*
* The sde-kit passes 'memsize' to __start in $a3, so set something
* here... Or set $a3 to zero and define DFLT_STACK_SIZE and
@@ -833,6 +912,9 @@
@@ -833,6 +912,9 @@ static int find_vpe_symbols(struct vpe *
if ( (v->__start == 0) || (v->shared_ptr == NULL))
return -1;
@ -455,7 +455,7 @@
return 0;
}
@@ -994,6 +1076,15 @@
@@ -994,6 +1076,15 @@ static int vpe_elfload(struct vpe * v)
(unsigned long)v->load_addr + v->len);
if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
@ -471,7 +471,7 @@
if (v->__start == 0) {
printk(KERN_WARNING "VPE loader: program does not contain "
"a __start symbol\n");
@@ -1064,6 +1155,9 @@
@@ -1064,6 +1155,9 @@ static int vpe_open(struct inode *inode,
struct vpe_notifications *not;
struct vpe *v;
int ret;
@ -481,7 +481,7 @@
if (minor != iminor(inode)) {
/* assume only 1 device at the moment. */
@@ -1089,7 +1183,12 @@
@@ -1089,7 +1183,12 @@ static int vpe_open(struct inode *inode,
release_progmem(v->load_addr);
cleanup_tc(get_tc(tclimit));
}
@ -495,7 +495,7 @@
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
if (!v->pbuffer) {
@@ -1097,11 +1196,14 @@
@@ -1097,11 +1196,14 @@ static int vpe_open(struct inode *inode,
return -ENOMEM;
}
v->plen = P_SIZE;
@ -510,7 +510,7 @@
#ifdef CONFIG_MIPS_APSP_KSPD
/* get kspd to tell us when a syscall_exit happens */
@@ -1349,6 +1451,133 @@
@@ -1349,6 +1451,133 @@ static void kspd_sp_exit( int sp_id)
cleanup_tc(get_tc(sp_id));
}
#endif
@ -644,7 +644,7 @@
static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len)
@@ -1430,6 +1659,18 @@
@@ -1430,6 +1659,18 @@ static int __init vpe_module_init(void)
printk("VPE loader: not a MIPS MT capable processor\n");
return -ENODEV;
}
@ -663,7 +663,7 @@
if (vpelimit == 0) {
printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
@@ -1474,10 +1715,12 @@
@@ -1474,10 +1715,12 @@ static int __init vpe_module_init(void)
mtflags = dmt();
vpflags = dvpe();
@ -677,7 +677,7 @@
val = read_c0_mvpconf0();
hw_tcs = (val & MVPCONF0_PTC) + 1;
@@ -1489,6 +1732,7 @@
@@ -1489,6 +1732,7 @@ static int __init vpe_module_init(void)
* reschedule send IPIs or similar we might hang.
*/
clear_c0_mvpcontrol(MVPCONTROL_VPC);
@ -685,7 +685,7 @@
evpe(vpflags);
emt(mtflags);
local_irq_restore(flags);
@@ -1514,6 +1758,7 @@
@@ -1514,6 +1758,7 @@ static int __init vpe_module_init(void)
}
v->ntcs = hw_tcs - tclimit;
@ -693,7 +693,7 @@
/* add the tc to the list of this vpe's tc's. */
list_add(&t->tc, &v->tc);
@@ -1582,6 +1827,7 @@
@@ -1582,6 +1827,7 @@ static int __init vpe_module_init(void)
out_reenable:
/* release config state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1653,6 +1653,28 @@
@@ -1878,6 +1878,28 @@ config IFX_VPE_EXT
help
IFX included extensions in APRP
@ -31,7 +31,7 @@
depends on MIPS_MT && PROC_FS
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -129,6 +129,13 @@
@@ -128,6 +128,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeo
EXPORT_SYMBOL(vpe1_wdog_timeout);
#endif
@ -45,7 +45,7 @@
/* grab the likely amount of memory we will need. */
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
#define P_SIZE (2 * 1024 * 1024)
@@ -867,6 +874,65 @@
@@ -866,6 +873,65 @@ static int vpe_run(struct vpe * v)
/* enable this VPE */
write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
@ -113,7 +113,7 @@
write_vpe_c0_cause(0);
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1348,6 +1348,106 @@
@@ -1345,6 +1345,106 @@ static int __init setcoherentio(char *st
__setup("coherentio", setcoherentio);
#endif
@ -220,7 +220,7 @@
void __cpuinit r4k_cache_init(void)
{
extern void build_clear_page(void);
@@ -1367,6 +1467,78 @@
@@ -1364,6 +1464,78 @@ void __cpuinit r4k_cache_init(void)
break;
}

View file

@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
--- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
@@ -50,4 +50,13 @@
@@ -50,4 +50,13 @@ struct ltq_eth_data {
int mii_mode;
};

View file

@ -10,7 +10,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -133,6 +133,14 @@
@@ -193,6 +193,14 @@ config SPI_IMX
This enables using the Freescale i.MX SPI controllers in master
mode.
@ -27,14 +27,14 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
depends on PARPORT && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -20,6 +20,7 @@
@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
+obj-$(CONFIG_SPI_LANTIQ) += spi_lantiq.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o
--- /dev/null
+++ b/drivers/spi/spi_lantiq.c
@@ -0,0 +1,1063 @@

View file

@ -18,7 +18,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
#include <asm/bootinfo.h>
#include <asm/irq.h>
@@ -119,3 +120,28 @@
@@ -119,3 +120,28 @@ ltq_register_etop(struct ltq_eth_data *e
platform_device_register(&ltq_etop);
}
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -121,6 +121,29 @@
@@ -121,6 +121,29 @@ ltq_register_etop(struct ltq_eth_data *e
}
}
@ -32,7 +32,7 @@
.start = LTQ_SSC_BASE_ADDR,
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
@@ -16,5 +16,6 @@
@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
extern void ltq_register_gpio_stp(void);
extern void ltq_register_ase_asc(void);
extern void ltq_register_etop(struct ltq_eth_data *eth);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -144,6 +144,16 @@
@@ -144,6 +144,16 @@ ltq_register_gpio_ebu(unsigned int value
platform_device_register(&ltq_ebu);
}
@ -19,7 +19,7 @@
.start = LTQ_SSC_BASE_ADDR,
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
@@ -17,5 +17,6 @@
@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
extern void ltq_register_ase_asc(void);
extern void ltq_register_etop(struct ltq_eth_data *eth);
extern void ltq_register_gpio_ebu(unsigned int value);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -154,6 +154,26 @@
@@ -154,6 +154,26 @@ ltq_register_madwifi_eep(void)
lantiq_emulate_madwifi_eep = 1;
}
@ -37,7 +37,7 @@
extern void ltq_register_gpio(void);
extern void ltq_register_gpio_stp(void);
@@ -18,5 +19,6 @@
@@ -18,5 +19,6 @@ extern void ltq_register_ase_asc(void);
extern void ltq_register_etop(struct ltq_eth_data *eth);
extern void ltq_register_gpio_ebu(unsigned int value);
extern void ltq_register_madwifi_eep(void);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/devices.c
+++ b/arch/mips/lantiq/devices.c
@@ -120,3 +120,20 @@
@@ -120,3 +120,20 @@ void __init ltq_register_pci(struct ltq_
pr_err("kernel is compiled without PCI support\n");
}
#endif
@ -23,7 +23,7 @@
+}
--- a/arch/mips/lantiq/devices.h
+++ b/arch/mips/lantiq/devices.h
@@ -19,5 +19,6 @@
@@ -19,5 +19,6 @@ extern void ltq_register_nor(struct phys
extern void ltq_register_wdt(void);
extern void ltq_register_asc(int port);
extern void ltq_register_pci(struct ltq_pci_data *data);
@ -32,7 +32,7 @@
#endif
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -66,6 +66,7 @@
@@ -66,6 +66,7 @@ static void __init easy50712_init(void)
ltq_register_nor(&easy50712_flash_data);
ltq_register_pci(&ltq_pci_data);
ltq_register_etop(&ltq_eth_data);

View file

@ -1,6 +1,6 @@
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -114,6 +114,8 @@
@@ -114,6 +114,8 @@ source "drivers/usb/wusbcore/Kconfig"
source "drivers/usb/host/Kconfig"
@ -11,7 +11,7 @@
source "drivers/usb/class/Kconfig"
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -27,6 +27,8 @@
@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
obj-$(CONFIG_USB_WUSB) += wusbcore/
@ -15513,7 +15513,7 @@
+#endif
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -6,3 +6,4 @@
@@ -6,3 +6,4 @@ obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
@ -15613,7 +15613,7 @@
+#endif
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2812,11 +2812,11 @@
@@ -2812,11 +2812,11 @@ hub_port_init (struct usb_hub *hub, stru
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {

View file

@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -63,7 +63,6 @@
@@ -63,7 +63,6 @@ static struct gpio_chip ltq_ebu_chip = {
.set = ltq_ebu_set,
.base = 72,
.ngpio = 16,
@ -10,7 +10,7 @@
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -72,7 +72,6 @@
@@ -72,7 +72,6 @@ static struct gpio_chip ltq_stp_chip = {
.set = ltq_stp_set,
.base = 48,
.ngpio = 24,