KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lantiq: DGN3500 support

Browse source 
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
This commit is contained in:
John Crispin 2013-05-30 16:00:50 +00:00
parent a9968d9cb8
commit 090a75447b
3 changed files with 15 additions and 23 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
target/linux/lantiq/base-files/etc/uci-defaults/02_network
View file

@ -72,6 +72,11 @@ WBMR)
VG3503J)
ucidef_set_interface_lan 'eth0 eth1'
;;
DGN3500*)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
;;
esac
[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"

19
target/linux/lantiq/base-files/lib/preinit/42_athfix
View file

@ -1,19 +0,0 @@
#!/bin/sh
. /lib/functions/lantiq.sh
init_atheeprom() {
local board=$(lantiq_board_name)
case $board in
"Netgear DGN3500B")
echo "- loading eeprom -"
dd if=/dev/mtd2 of=/sys/firmware/ath_eeprom bs=1k skip=60 count=4
echo 0 > /sys/bus/pci/slots/0000\:00\:0e.0/power
sleep 1
echo 1 > /sys/bus/pci/rescan
;;
esac
}
boot_hook_add preinit_essential init_atheeprom

14
target/linux/lantiq/dts/DGN3500.dtsi
View file

@ -2,7 +2,7 @@
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
@ -99,7 +99,7 @@
read-only;
};
partition@20000 {
ath9k_cal: partition@20000 {
reg = <0x20000 0x10000>;
label = "calibration";
read-only;
@ -112,6 +112,13 @@
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0xf000>;
ath,pci-slot = <14>;
ath,eep-swap;
};
rtl8366rb {
compatible = "rtl8366rb";
gpio-sda = <&gpio 35 0>;
@ -144,7 +151,7 @@
gpio-leds {
compatible = "gpio-leds";
internet {
label = "inernet";
label = "internet";
gpios = <&gpio 2 1>;
};
dsl {
@ -158,7 +165,6 @@
power {
label = "power";
gpios = <&gpio 34 1>;
default-state = "on";
};
power2 {
label = "power2";