Commit graph

9222 commits

Author SHA1 Message Date
Felix Fietkau
6bb7409e5a cns3xxx: Fix laguna arm11mpcore watchdog
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where
all mpcore-wdt boards point the driver base too.  I believe this is wrong
because 0x600 is aliased to the timer/watchdog of the 'current CPU' where
0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog.  Thus
if your timer/watchdog application is switching between CPU's it can end up
writing to the wrong CPU's registers which results in random board resets
from watchdog timeouts etc.

This patch forces the timer/watchdog driver to use CPU0's registers always.
Its my opinion that other mpcore-wdt boards should be doing the same thing.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33683
2012-10-10 11:38:58 +00:00
Felix Fietkau
f570c806ef mtd: allow partial block unlock
This allows sysupgrade for devices such as the Gateworks Avila/Cambria
product families based on the ixp4xx using the redboot bootloader with
combined FIS directory and RedBoot config partitions on larger FLASH
devices with larger eraseblocks.

This second iteration of this patch addresses previous issues:
  - whitespace breakage fixed
  - unlock in all scenarios
  - simplification and fix logic bug

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33681
2012-10-10 11:38:44 +00:00
Felix Fietkau
cae6f4ddb4 ixp4xx: enable OPTIMIZE_FOR_SIZE
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33679
2012-10-10 11:38:28 +00:00
Felix Fietkau
f14b8d43f2 ixp4xx: add missing reboot handlers (fixes #11577)
SVN-Revision: 33672
2012-10-09 15:38:55 +00:00
Felix Fietkau
856fba88d9 x86: remove the reboot=bios command line parameter (#12193)
SVN-Revision: 33671
2012-10-09 15:20:11 +00:00
Jonas Gorski
fbe0af3237 bcm63xx: remove bcm_tag usage in kernel
Fixes #12292.

SVN-Revision: 33670
2012-10-09 08:08:49 +00:00
Jonas Gorski
6a000ba37a bcm63xx: fix 963281TAN image names
it's a 6328, not a 6348.

SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
Jonas Gorski
997ace7e5e firmware-utils: move bcm_tag.h here
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.

SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
Jonas Gorski
f16ea6be3f bcm63xx: fix entering failsafe through button
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.

SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
Felix Fietkau
e5bb1a1bc7 cns3xxx: add sysupgrade support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/base-files/lib/cns3xxx.sh          |   22 ++
 target/linux/cns3xxx/base-files/lib/upgrade/platform.sh |  122 ++++++++++++++++
 target/linux/cns3xxx/image/Makefile                     |   19 +-
 3 files changed, 159 insertions(+), 4 deletions(-)

SVN-Revision: 33650
2012-10-07 23:24:02 +00:00
Felix Fietkau
68449e2e01 cns3xxx: add GW2383 board support
Add GPIO/LED support for Gateworks GW2383

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/patches-3.3/300-laguna_support.patch |   18 +++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

SVN-Revision: 33649
2012-10-07 23:23:58 +00:00
Felix Fietkau
6b778f57aa cns3xxx: fix gpio access and add gpio IRQ support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch |  536 ++++++++++++++++++++
 1 file changed, 536 insertions(+)

SVN-Revision: 33648
2012-10-07 23:23:52 +00:00
Felix Fietkau
bca070dfbe ixp4xx: update Gateworks Avila board support
Several new features for newer boards:
 - add additional UARTs present on some boards
 - add additional LEDs present on some boards
 - add HSS audio device codec present on some boards
 - add support for GSC present on some boards
 - add per model setup support for newer boards
 - set FLASH window per-model for boards with larger FLASH

Some fixes:
 - add IRQ mapping for additional PCI devices (USB Host)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33647
2012-10-07 23:23:47 +00:00
Felix Fietkau
22b86fec7c ixp4xx: patch cleanup
roll all avila patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33646
2012-10-07 23:23:43 +00:00
Felix Fietkau
d660734a1b ixp4xx: Add HSS audio driver for Avila product family
Add ixp4xx HSS audio driver for Avila

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33645
2012-10-07 23:23:39 +00:00
Felix Fietkau
ce692ed043 ixp4xx: update Gateworks Cambria board support
Several new features for newer boards:
 - add irq mapping for additional devices
 - add platform data for i2c bus to SFP modules
 - add additional UARTs present on some boards
 - increased R/W delay for expansion bus UARTs
 - add additional LEDs present on some boards
 - add GPIO exports and configuration
 - add ENET switch config present on some boards
 - add support for GSC present on some boards
 - added per model setup support for newer boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33644
2012-10-07 23:23:34 +00:00
Felix Fietkau
21d182b9e5 ixp4xx: patch cleanup
roll all cambria patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33643
2012-10-07 23:23:29 +00:00
Felix Fietkau
d3567cc886 ixp4xx: split out new UART I/O to its own patch
This is being done for general cleanup

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33642
2012-10-07 23:23:25 +00:00
Felix Fietkau
1abbe676d1 x86: rename the iso file to openwrt-x86-generic.iso
SVN-Revision: 33641
2012-10-07 23:05:39 +00:00
Felix Fietkau
0dd7644ec7 x86: remove grub-legacy
SVN-Revision: 33640
2012-10-07 23:01:56 +00:00
Felix Fietkau
a1bcd25082 x86: add grub2 iso support
SVN-Revision: 33639
2012-10-07 23:01:52 +00:00
Felix Fietkau
53cc34e517 x86/generic: enable cdrom + iso9660 support
SVN-Revision: 33638
2012-10-07 23:01:47 +00:00
Gabor Juhos
befb648642 ar71xx: build image for the TL-WR841N/ND v8
SVN-Revision: 33623
2012-10-04 20:16:06 +00:00
Gabor Juhos
02a85dfd85 ar71xx: user-space support for TL-WR841N/ND v8
SVN-Revision: 33622
2012-10-04 20:16:05 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
Hauke Mehrtens
07234dc8bd bcma: do not initialize deactivated PCIe cores
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

SVN-Revision: 33620
2012-10-04 15:45:54 +00:00
Hauke Mehrtens
2819890839 use memcmp in mem size detection as suggested by blogic
SVN-Revision: 33619
2012-10-04 15:42:12 +00:00
Florian Fainelli
5e0df9582b fix typo in 05_set_ether_mac_rdc preinit script (#11166)
SVN-Revision: 33618
2012-10-04 12:36:50 +00:00
Gabor Juhos
d832cd11f8 ramips: add image for ALL0256N-8M
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614
2012-10-04 06:34:09 +00:00
Florian Fainelli
47c5c4df1c add Default and Gumstix PXA profiles
Gumstix builds a fake flash image for usage in qemu

SVN-Revision: 33609
2012-10-03 16:15:05 +00:00
Florian Fainelli
48daf407a6 advertise jffs2 feature
SVN-Revision: 33607
2012-10-03 16:12:57 +00:00
Florian Fainelli
bb7ac8ae7d remove broken flag
SVN-Revision: 33606
2012-10-03 16:12:39 +00:00
Florian Fainelli
8f44ba1ae2 fix build with latest gpiolib changes
SVN-Revision: 33605
2012-10-03 16:12:03 +00:00
Florian Fainelli
d504b6251c more convertions to {read,write}_relaxed I/O accessors
SVN-Revision: 33604
2012-10-03 16:10:47 +00:00
Felix Fietkau
a2e1dce829 cns3xxx: add missing kernel config symbol
SVN-Revision: 33603
2012-09-30 15:31:34 +00:00
Hauke Mehrtens
9f083117d1 refresh patches
SVN-Revision: 33602
2012-09-30 11:45:53 +00:00
Hauke Mehrtens
642fe7f10a bcma: use fallback sprom if sprom on card was not valid
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

SVN-Revision: 33601
2012-09-30 11:45:31 +00:00
Hauke Mehrtens
42952fd94f bcma: initialize sprom earlier
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.

SVN-Revision: 33600
2012-09-30 11:44:44 +00:00
Hauke Mehrtens
2d40590a23 run make kernel_oldconfig
SVN-Revision: 33599
2012-09-30 11:44:04 +00:00
Hauke Mehrtens
e5eefed084 ignore the last page on bcma based SoCs
SVN-Revision: 33598
2012-09-30 11:43:40 +00:00
Hauke Mehrtens
c9feffc332 Fix reading sprom from nvram without a prefix
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.

SVN-Revision: 33597
2012-09-30 11:43:13 +00:00
Hauke Mehrtens
4d5c75a54e improve the check for the memory size
This will hopefully fix bug #9360 and #9097 in trunk.

SVN-Revision: 33596
2012-09-30 11:42:16 +00:00
John Crispin
f3cab53f27 dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency
SVN-Revision: 33593
2012-09-28 21:54:31 +00:00
John Crispin
0afc7b9b6d add support for adm6996 phy
SVN-Revision: 33592
2012-09-28 21:38:02 +00:00
John Crispin
9dc218f88f tapi was not registeredproperly for most arcadyan boards
SVN-Revision: 33591
2012-09-28 20:57:06 +00:00
Imre Kaloz
c53936bb4b Add FIQ support for cns3xxx
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33581
2012-09-28 17:35:35 +00:00
Imre Kaloz
2f2115c436 Update board support for Gateworks Laguna Product family
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33580
2012-09-28 17:34:18 +00:00
Imre Kaloz
70729bb4a5 USB iso mode fixes
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33579
2012-09-28 17:31:22 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
SVN-Revision: 33575
2012-09-27 20:05:42 +00:00
Gabor Juhos
a0df3fa315 generic: enable CONFIG_USB_EHCI_TT_NEWSCHED
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.

See: http://www.spinics.net/lists/linux-usb/msg31993.html

SVN-Revision: 33574
2012-09-27 20:05:39 +00:00
Gabor Juhos
e3bcbeb427 ramips: add memory detection code for RT5350
SVN-Revision: 33571
2012-09-27 10:18:15 +00:00
Gabor Juhos
80d2da9f0f ramips: allow to use custom code for memory size detection
SVN-Revision: 33570
2012-09-27 10:18:14 +00:00
Florian Fainelli
4ea68a13e3 include sys/resource.h in arch/um/os-Linux/start_up.c (#12155)
Required for recent (e)glibc systems

SVN-Revision: 33569
2012-09-27 09:21:01 +00:00
Imre Kaloz
68f8db6731 fix ncores for single-core systems.
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33566
2012-09-27 08:07:17 +00:00
Imre Kaloz
9ace6ace8f add i2c retries
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33565
2012-09-27 08:06:13 +00:00
Imre Kaloz
7dd6b04c28 fix pcie abort handling
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33564
2012-09-27 08:05:19 +00:00
Florian Fainelli
caf900f0e4 remove kmod-spi-bitbang
This is no longer a dependency of kmod-spi-bcm63xx

SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
Gabor Juhos
579e9cded8 generic: add upstream commit id to codel patches and refresh those
SVN-Revision: 33560
2012-09-26 14:17:17 +00:00
Florian Fainelli
eb97933e2a backport the upstream entropy changes (#11951)
SVN-Revision: 33559
2012-09-26 12:54:01 +00:00
Florian Fainelli
4a67ccb163 get rid of the IRQF_SAMPLE_RANDOM flag
SVN-Revision: 33558
2012-09-26 12:53:58 +00:00
Florian Fainelli
c27c0d1ff0 add wmbus-repeater to the dLAN USB Extender profile
SVN-Revision: 33556
2012-09-25 20:56:50 +00:00
Florian Fainelli
c7cf4def64 enable multicast and advanced ip routers configs
SVN-Revision: 33555
2012-09-25 20:53:34 +00:00
Florian Fainelli
d95f612340 add kmod-usb-serial-ftdi to the dLAN USB Extender profile
SVN-Revision: 33554
2012-09-25 20:50:20 +00:00
John Crispin
d8c04821c3 make uci-defaults switch detection work on rt5350
SVN-Revision: 33549
2012-09-25 14:47:18 +00:00
John Crispin
34d57ebd8b add ethernet support for rt5350
SVN-Revision: 33548
2012-09-25 14:47:08 +00:00
John Crispin
af0cd76937 make ramips ethernet use a register mapping table
SVN-Revision: 33547
2012-09-25 14:46:58 +00:00
Hauke Mehrtens
0818180715 activate failsafe on all ports of the switch and not just port 0.
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544
2012-09-25 14:04:59 +00:00
Gabor Juhos
ffc0ea6c5d ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

SVN-Revision: 33540
2012-09-25 12:57:41 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU
SVN-Revision: 33539
2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1
SVN-Revision: 33538
2012-09-25 12:57:38 +00:00
Gabor Juhos
e2504a977a ar71xx: add missing backslash to uci-defaults/leds (closes #12240)
SVN-Revision: 33537
2012-09-25 12:49:43 +00:00
John Crispin
394a560a9a unbreak port mapping detection
SVN-Revision: 33536
2012-09-25 09:51:48 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040
Should fix #12211. Compile tested only.

SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
Felix Fietkau
493b7c7f3c x86: avoid using grub prepare when using grub2
SVN-Revision: 33525
2012-09-23 09:59:56 +00:00
Felix Fietkau
999252dccc x86-generic: enable a few more common kernel options/drivers
SVN-Revision: 33516
2012-09-22 23:29:20 +00:00
Felix Fietkau
b968dcd52e kernel: increase log buffer size
SVN-Revision: 33515
2012-09-22 23:10:42 +00:00
Felix Fietkau
0260262f0b x86: enable usb storage support for the generic subtarget to support booting from usb devices
SVN-Revision: 33514
2012-09-22 21:15:59 +00:00
Felix Fietkau
52e8ee0666 x86: add support for building grub2 images
SVN-Revision: 33513
2012-09-22 20:10:42 +00:00
Felix Fietkau
ce4244c8af x86: split generic image building into a separate script
SVN-Revision: 33511
2012-09-22 20:10:35 +00:00
Felix Fietkau
6c02dd2b04 x86: rename gen_image_x86.sh to gen_image_grub.sh
SVN-Revision: 33510
2012-09-22 20:10:31 +00:00
Felix Fietkau
d6ca46cd25 cns3xxx: fix ethernet driver tx completion and queue stop/start
SVN-Revision: 33504
2012-09-22 00:34:53 +00:00
Felix Fietkau
fb71465a4e cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames
SVN-Revision: 33503
2012-09-22 00:34:49 +00:00
Imre Kaloz
ed3597d927 move gpio stuff into the right file
SVN-Revision: 33502
2012-09-21 05:40:04 +00:00
Imre Kaloz
a74cf6f9a8 refresh patches
SVN-Revision: 33501
2012-09-21 05:38:16 +00:00
Felix Fietkau
15159604d9 cns3xxx: add a small optimization for rx offload
SVN-Revision: 33500
2012-09-21 00:13:12 +00:00
Felix Fietkau
a1c016fe16 cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames
SVN-Revision: 33499
2012-09-21 00:13:08 +00:00
Felix Fietkau
029aaf4514 cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining
SVN-Revision: 33498
2012-09-20 20:27:18 +00:00
Felix Fietkau
c4a419b445 kernel: enable perf events when enabling profiling, fixes oprofile on arm
SVN-Revision: 33497
2012-09-20 20:27:14 +00:00
Hauke Mehrtens
fd7b2b5141 deactivate mips wait instruction for MIPS 74K on Broadcom SoCs
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.

SVN-Revision: 33496
2012-09-20 14:51:57 +00:00
Felix Fietkau
1067ccf9f7 cns3xxx: remove the broken flag
SVN-Revision: 33493
2012-09-19 23:50:25 +00:00
Felix Fietkau
2db9e9f624 cns3xxx: fix kernel config
SVN-Revision: 33492
2012-09-19 23:50:22 +00:00
Felix Fietkau
34d30654ae cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists
SVN-Revision: 33491
2012-09-19 23:50:18 +00:00
Felix Fietkau
eff9405752 cns3xxx: fix ethernet tx checksum offload
SVN-Revision: 33490
2012-09-19 23:50:15 +00:00
Felix Fietkau
dd1fb8289f cns3xxx: merge ethernet driver changes from gateworks
SVN-Revision: 33489
2012-09-19 23:50:12 +00:00
Felix Fietkau
190b4344a3 cns3xxx: build images for the old boot loader and the new one (default to the new one)
SVN-Revision: 33488
2012-09-19 23:50:09 +00:00
Felix Fietkau
59b1d018b1 cns3xxx: fix the ethernet driver makefile
SVN-Revision: 33487
2012-09-19 23:50:06 +00:00
Felix Fietkau
c9139c150c cns3xxx: reorganize patches, fix pcie io space init order
SVN-Revision: 33486
2012-09-19 23:50:02 +00:00
Felix Fietkau
7cd4968d0e cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls
SVN-Revision: 33485
2012-09-19 23:49:58 +00:00
Felix Fietkau
2f39fa872a cns3xxx: add missing callbacks for the laguna machine support
SVN-Revision: 33484
2012-09-19 23:49:50 +00:00
Florian Fainelli
57bd95734d brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33474
2012-09-19 15:13:33 +00:00
Florian Fainelli
136eb6815c omap24xx/profiles/n810: remove reference to non-existing package
The package block-hotplug doesn't exist, removing reference to it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33473
2012-09-19 15:13:30 +00:00
Hauke Mehrtens
db18fa388d update fix-boot patch.
Do not change the code any more but use the kconfig options

SVN-Revision: 33463
2012-09-19 10:18:36 +00:00
Hauke Mehrtens
eeb3ad1860 update gpio patches
SVN-Revision: 33462
2012-09-19 10:17:51 +00:00
Gabor Juhos
79ffd1032a ar71xx: fix a typo in TEW-637GRU image names
SVN-Revision: 33460
2012-09-18 14:32:25 +00:00
Gabor Juhos
9a11f882d7 ar71xx: revert DIR-825-B1 wholeflash image support.
It should be implemmented in a cleaner way.

This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"

SVN-Revision: 33459
2012-09-18 14:30:57 +00:00
Florian Fainelli
ee16fea079 disable VFPv4 probing
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.

SVN-Revision: 33458
2012-09-18 10:00:56 +00:00
Florian Fainelli
4d2fb44f0c partially revert r33403
The target CFLAGS were also accidentally changed

SVN-Revision: 33457
2012-09-18 10:00:46 +00:00
Gabor Juhos
a7c5c4390a ar71xx: register the NAND flash controller device on DB120
SVN-Revision: 33455
2012-09-17 20:30:57 +00:00
Gabor Juhos
7c85646176 ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
SVN-Revision: 33454
2012-09-17 20:30:55 +00:00
Gabor Juhos
3bdf0bc36f ar71xx: ar934x_nfc: increase DMA retry count
SVN-Revision: 33453
2012-09-17 20:30:54 +00:00
Gabor Juhos
b7cb43f6a6 ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
SVN-Revision: 33452
2012-09-17 20:30:53 +00:00
Gabor Juhos
96dde2e591 ar71xx: ar934x_nfc: fix RNDOUT operation
SVN-Revision: 33451
2012-09-17 20:30:51 +00:00
Gabor Juhos
338b698fb6 ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
SVN-Revision: 33450
2012-09-17 20:30:50 +00:00
Daniel Dickinson
0f254b4b67 dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
SVN-Revision: 33447
2012-09-17 14:17:12 +00:00
Felix Fietkau
e8893fdf7a ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x
SVN-Revision: 33446
2012-09-17 11:17:29 +00:00
Felix Fietkau
ed14ffc7da ar71xx: fix WP543 image builds
SVN-Revision: 33413
2012-09-15 10:21:21 +00:00
John Crispin
223db72385 D-Link DAP-1350; Avoid bricking esw config
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33411
2012-09-15 09:28:28 +00:00
John Crispin
bf355f8ee9 ramips/rt3883: fix a typo in the ASUS profile
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33410
2012-09-15 09:20:50 +00:00
Florian Fainelli
a2b29c591e partially revert r33403
SVN-Revision: 33409
2012-09-14 15:44:25 +00:00
Florian Fainelli
0d464a8ac3 set DEVICE_TYPE to developerboard
SVN-Revision: 33408
2012-09-14 15:37:51 +00:00
Florian Fainelli
42846febb9 fix sparc32 assembler failures with newer toolchains
SVN-Revision: 33407
2012-09-14 15:37:40 +00:00
Florian Fainelli
39ddc9105c refresh patches so they apply cleanly
SVN-Revision: 33406
2012-09-14 15:37:12 +00:00
Florian Fainelli
4128b8e189 set DEVICE_TYPE to developperboard
SVN-Revision: 33403
2012-09-14 15:36:33 +00:00
Florian Fainelli
2254fc2673 set DEVICE_TYPE to developperboard
SVN-Revision: 33402
2012-09-14 15:36:30 +00:00
Gabor Juhos
61dc6e65c0 ar71xx: merge machine support patches
SVN-Revision: 33389
2012-09-13 07:26:28 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011
SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller
SVN-Revision: 33387
2012-09-13 07:26:25 +00:00
Gabor Juhos
10cd35c0e7 ar71xx: package the AR934x NAND driver module
SVN-Revision: 33386
2012-09-13 07:26:23 +00:00
Gabor Juhos
1e5fdbeae5 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
SVN-Revision: 33385
2012-09-13 07:26:22 +00:00
Gabor Juhos
acaf597f4a generic: add MTD_NAND_AR934X symbol
SVN-Revision: 33384
2012-09-13 07:26:21 +00:00
Gabor Juhos
43147ffec5 generic: move GENERIC_PWM symbol into the generic config
SVN-Revision: 33383
2012-09-13 06:38:31 +00:00
Gabor Juhos
40a5f5c16e ar71xx: define NAND controller base address and register size for AR934X/QCA955x
SVN-Revision: 33382
2012-09-12 19:06:38 +00:00
Gabor Juhos
0a42b02126 ramips/rt305x: add initial support for Rt5350 SoC
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33381
2012-09-12 19:03:12 +00:00
Hauke Mehrtens
95c141aaac add gpio sysfs entries
This fixes #10256

SVN-Revision: 33369
2012-09-11 15:04:20 +00:00
Gabor Juhos
4ee5b528de ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
SVN-Revision: 33362
2012-09-10 14:38:01 +00:00
Gabor Juhos
2e0e38ad69 ar71xx: fix QCA955X_EHCI_SIZE
SVN-Revision: 33360
2012-09-10 14:32:54 +00:00
Florian Fainelli
a36bdb2417 fix ixp4xx_hss build failure (#12162)
SVN-Revision: 33356
2012-09-10 08:53:21 +00:00
Jo-Philipp Wich
caa66bd150 fix description of nand/Ath5k profile (#12149)
SVN-Revision: 33352
2012-09-09 21:40:26 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751
SVN-Revision: 33348
2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines
SVN-Revision: 33347
2012-09-09 14:05:28 +00:00
Gabor Juhos
2323120d5e generic add WLAN calibration data ID to routerboot.h
SVN-Revision: 33346
2012-09-09 14:05:26 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011
SVN-Revision: 33345
2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
SVN-Revision: 33343
2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation
SVN-Revision: 33342
2012-09-09 14:05:17 +00:00
Gabor Juhos
f3ecbea052 adm5120: move common routerboot definitions into a separate header file
Those will be used on the ar71xx platform as well.

SVN-Revision: 33341
2012-09-09 11:55:42 +00:00
Jonas Gorski
7708138183 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
Fixes booting the device with button hotplug enabled (#10785).

SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751
SVN-Revision: 33338
2012-09-08 17:51:56 +00:00
Gabor Juhos
73df240bb3 ar71xx: add library code for RLE decoding
It will be used for the MikroTik boards.

SVN-Revision: 33337
2012-09-08 17:51:54 +00:00
Gabor Juhos
f4be8a76de ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
SVN-Revision: 33335
2012-09-08 13:39:09 +00:00
Gabor Juhos
70d00ac64e ar71xx: refresh kernel patches
SVN-Revision: 33334
2012-09-08 13:39:04 +00:00
Florian Fainelli
6771d63284 use the recommended ARM I/O accessors
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

SVN-Revision: 33330
2012-09-08 09:51:05 +00:00
Daniel Dickinson
c3b7139ab2 dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
SVN-Revision: 33326
2012-09-06 18:15:26 +00:00
Luka Perkov
4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
Florian Fainelli
3730e6c794 add some ohci workarounds to make ohci work
SVN-Revision: 33323
2012-09-05 20:19:29 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value.
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
2012-09-05 20:08:42 +00:00
John Crispin
f186bff0ef add missing kvm_guest kernel options
SVN-Revision: 33319
2012-09-05 19:38:42 +00:00
Gabor Juhos
069f544d2b ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
SVN-Revision: 33318
2012-09-05 19:26:50 +00:00
Gabor Juhos
81bb246a8d ar71xx: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33317
2012-09-05 19:22:51 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
2012-09-05 19:22:48 +00:00
Florian Fainelli
94a45be66b enable CFI command set 0002 FORCE_WORD_WRITE
SVN-Revision: 33315
2012-09-03 20:25:51 +00:00
Florian Fainelli
19cbe80501 pad squashfs image
SVN-Revision: 33314
2012-09-03 20:25:46 +00:00
Florian Fainelli
1964753c22 add Generic and dLAN USB Extender profiles
SVN-Revision: 33313
2012-09-03 20:25:40 +00:00
Florian Fainelli
e88e20d975 nuport-mac: disable MAC RX and TX during interface close
Fixes sporadic crashes while reconfiguring the network interface.

SVN-Revision: 33312
2012-09-03 10:26:01 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.

SVN-Revision: 33310
2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
2012-08-29 10:37:54 +00:00
Gabor Juhos
02cb5f9dcd ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
SVN-Revision: 33308
2012-08-29 10:37:53 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
2012-08-29 10:37:47 +00:00
Gabor Juhos
bc4763a399 ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.

Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.

[juhosg: fix checkpatch warning]

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33304
2012-08-29 10:37:45 +00:00
Gabor Juhos
1617f226a9 ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.

The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33303
2012-08-29 10:37:43 +00:00
Gabor Juhos
bb0785880a ramips: Rename POC registers
Rename POC registers.

The current code uses POC1-POC3.

The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2

So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33302
2012-08-29 10:37:41 +00:00
Gabor Juhos
f1b9d77912 ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33301
2012-08-29 10:37:40 +00:00
Gabor Juhos
1f3400d3b4 ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.

The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33300
2012-08-29 10:37:38 +00:00
Gabor Juhos
3b17f1deb8 ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c

This patch adds swconfig support for ramips_esw:

Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.

The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33299
2012-08-29 10:37:36 +00:00
Gabor Juhos
358c7e47f2 ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.

Prepare for the main swconfig patch by cleaning up indentation a bit.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33298
2012-08-29 10:37:35 +00:00
Gabor Juhos
0c5688cc38 ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
SVN-Revision: 33295
2012-08-29 10:37:30 +00:00
Gabor Juhos
5fdbb33db4 ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.

There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.

[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
Gabor Juhos
4405faae26 gemini: fix bus ids for PHY devices (closes: #12082)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33288
2012-08-27 18:09:57 +00:00
Gabor Juhos
f2030c3113 ar71xx: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33287
2012-08-27 14:55:38 +00:00
Gabor Juhos
d65c06c15c ar71xx: generate image for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33286
2012-08-27 14:55:37 +00:00
Gabor Juhos
4079f3163f ar71xx: sysupgrade for the ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33285
2012-08-27 14:55:36 +00:00
Gabor Juhos
abffa4ecfb ar71xx: rename all0258n.sh to allnet.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33284
2012-08-27 14:55:35 +00:00
Gabor Juhos
1d96b0275c ar71xx: detect ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33282
2012-08-27 14:55:32 +00:00
Gabor Juhos
eebdd633e4 ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33281
2012-08-27 14:55:31 +00:00
Gabor Juhos
cca873e8e0 ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33280
2012-08-27 14:55:26 +00:00
Gabor Juhos
fccf1f5105 generic: add support for the EON EN25Q64 SPI flash chip
It is used in some TL-WDR4310 devices. Closes #12077.

SVN-Revision: 33275
2012-08-26 09:27:56 +00:00
Gabor Juhos
5a9c7fda3e ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.

The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.

Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:

for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
	| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
		grep -q ,$i, Makefile || echo $i;
done > missing-boards.new

Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33274
2012-08-26 08:15:11 +00:00
Gabor Juhos
f3d5edffdc ar71xx: image: fix TL-WR1043ND board id (#12079)
SVN-Revision: 33272
2012-08-26 06:30:37 +00:00
John Crispin
de3c3d7181 Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.

Signed-off-by: Unai Uribarri <unaiur@gmail.com>

SVN-Revision: 33266
2012-08-24 06:15:06 +00:00
Gabor Juhos
773b33d7d2 ar71xx: image: group and sort {Single,Multi}Profiles
SVN-Revision: 33264
2012-08-23 13:17:47 +00:00
Gabor Juhos
a5e0eb0d95 ar71xx: image: group and sort mtdlayout definitions
SVN-Revision: 33263
2012-08-23 13:14:35 +00:00
Gabor Juhos
f0ad972aba ar71xx: image: use the MultiProfile helper for the Madwifi profile
SVN-Revision: 33262
2012-08-23 13:11:25 +00:00
Gabor Juhos
333f030b79 ar71xx: image: automatically build a list of SingleProfiles
Use that for Default/Minimal profiles.

SVN-Revision: 33261
2012-08-23 13:08:15 +00:00
Gabor Juhos
5dce77837f ar71xx: image: use the new helpers for the ZyXEL images
SVN-Revision: 33260
2012-08-23 13:05:05 +00:00
Gabor Juhos
be4be2d82a ar71xx: image: use the new helpers for the Zcomax images
SVN-Revision: 33259
2012-08-23 13:01:55 +00:00
Gabor Juhos
74bdb68ea4 ar71xx: image: use the new helpers for the WRT400 images
SVN-Revision: 33258
2012-08-23 12:58:45 +00:00
Gabor Juhos
8cf9a7b1c7 ar71xx: image: use the new helpers for the WZRHPG30XNH images
SVN-Revision: 33257
2012-08-23 12:55:35 +00:00
Gabor Juhos
c965d8ead8 ar71xx: image: use the new helpers for the WHRHPG300N images
SVN-Revision: 33256
2012-08-23 12:52:25 +00:00
Gabor Juhos
71af43a7c7 ar71xx: image: use the new helpers for the UBNTXM images
SVN-Revision: 33255
2012-08-23 12:49:15 +00:00
Gabor Juhos
097e9938b4 ar71xx: image: use the new helpers for the UBNT images
SVN-Revision: 33254
2012-08-23 12:46:06 +00:00
Gabor Juhos
216e9b7a92 ar71xx: image: use the new helpers for the TPLINKOLD images
SVN-Revision: 33253
2012-08-23 12:42:56 +00:00
Gabor Juhos
48d6081fa5 ar71xx: image: use the new helpers for the TPLINK-LZMA images
SVN-Revision: 33252
2012-08-23 12:39:46 +00:00
Gabor Juhos
8546e00157 ar71xx: image: use the new helpers for the TPLINK images
SVN-Revision: 33251
2012-08-23 12:36:35 +00:00
Gabor Juhos
27feea1070 ar71xx: image: use the new helpers for the Planex images
SVN-Revision: 33250
2012-08-23 12:33:25 +00:00
Gabor Juhos
4dbabe5c21 ar71xx: image: use the new helpers for the PB4X images
SVN-Revision: 33249
2012-08-23 12:30:15 +00:00
Gabor Juhos
bbaa0b9200 ar71xx: image: use the new helpers for the OpenMesh images
SVN-Revision: 33248
2012-08-23 12:27:06 +00:00
Gabor Juhos
4edc55f475 ar71xx: image: use the new helpers for the Netgear images
SVN-Revision: 33247
2012-08-23 12:23:56 +00:00
Gabor Juhos
d9f933b8b8 ar71xx: image: use the new helpers for the MyLoader images
SVN-Revision: 33246
2012-08-23 12:20:46 +00:00
Gabor Juhos
a409d0cf46 ar71xx: image: use the new helpers for the DIR825B1 images
SVN-Revision: 33245
2012-08-23 12:17:36 +00:00
Gabor Juhos
b7e05e3a59 ar71xx: image: use the new helpers for the CyberTAN images
SVN-Revision: 33244
2012-08-23 12:14:26 +00:00
Gabor Juhos
292f074ad7 ar71xx: image: use the new helpers for the Cameo933x images
SVN-Revision: 33243
2012-08-23 12:11:17 +00:00
Gabor Juhos
4c9a428614 ar71xx: image: use the new helpers for the Cameo913x images
SVN-Revision: 33242
2012-08-23 12:08:07 +00:00
Gabor Juhos
19d840980f ar71xx: image: use the new helpers for the Cameo7240 images
SVN-Revision: 33241
2012-08-23 12:04:57 +00:00
Gabor Juhos
ce91228e2b ar71xx: image: use the new helpers for the AthGzip images
SVN-Revision: 33240
2012-08-23 12:01:47 +00:00
Gabor Juhos
70e3dda99c ar71xx: image: use the new helpers for the AthLzma images
SVN-Revision: 33239
2012-08-23 11:58:37 +00:00
Gabor Juhos
31a88650d7 ar71xx: image: use the new helpers for the ALFA images
SVN-Revision: 33238
2012-08-23 11:55:27 +00:00
Gabor Juhos
2379e6f2a3 ar71xx: image: add a few helper functions
These functions will be used to simplify the Makefile.

SVN-Revision: 33237
2012-08-23 11:52:18 +00:00
Gabor Juhos
6ebc77af73 ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
SVN-Revision: 33236
2012-08-23 11:49:07 +00:00
Hauke Mehrtens
847afa343f update profiles
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder

SVN-Revision: 33235
2012-08-22 21:54:06 +00:00
Gabor Juhos
a2f82cf7ec ar71xx: add profile and build image for the TEW-712BR
SVN-Revision: 33234
2012-08-22 20:18:44 +00:00
Gabor Juhos
8744f8d183 ar71xx: TEW-712BR user space support
SVN-Revision: 33232
2012-08-22 20:12:24 +00:00
Gabor Juhos
8b3d95bba9 ar71xx: add support for the TRENDnet TEW-712BR board
SVN-Revision: 33231
2012-08-22 20:09:13 +00:00
Gabor Juhos
4073317695 ar71xx: fix serial clock calculation on AR933x
Closes #12031.

SVN-Revision: 33230
2012-08-22 19:11:10 +00:00
Gabor Juhos
cebaa557be ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
2012-08-22 17:55:12 +00:00
John Crispin
3686b8d279 derive system from hostcc to allow building inside a chroot
SVN-Revision: 33228
2012-08-22 15:07:32 +00:00
Gabor Juhos
2811d6c183 ar71xx: fix comment style in mach-tl-wr2543n.c
SVN-Revision: 33227
2012-08-22 12:42:59 +00:00
Gabor Juhos
dc13dc1d54 ar71xx: fix mtd layout of the AP113
The 'mtdparts=' prefix and the name of the flash device is missing.

SVN-Revision: 33226
2012-08-22 12:39:46 +00:00
Gabor Juhos
eb54a05e89 ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33225
2012-08-22 12:36:35 +00:00
Gabor Juhos
5a694e09c8 ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
Gabor Juhos
d77418d67e ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33220
2012-08-22 09:46:30 +00:00
Gabor Juhos
0517183b9c ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.

[juhosg: remove the custom machine type, change the board name instead]

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
John Crispin
6c9d20d6e7 tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
2012-08-22 09:22:38 +00:00
John Crispin
968ac3fd03 add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>

SVN-Revision: 33215
2012-08-22 09:10:24 +00:00
Hauke Mehrtens
3133d4d8de remove unused file
SVN-Revision: 33210
2012-08-18 15:45:18 +00:00
Hauke Mehrtens
9eaee85cc2 make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.

SVN-Revision: 33209
2012-08-18 14:08:35 +00:00
Hauke Mehrtens
f4d6baf498 update gpio patches
SVN-Revision: 33208
2012-08-18 11:51:35 +00:00
Gabor Juhos
67e6461ad7 ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.

The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.

I'm working on implementing fixtrx for uImage in the mtd package to solve this.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33206
2012-08-17 17:56:07 +00:00
Gabor Juhos
89606b61b1 ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.

[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]

Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33205
2012-08-17 17:56:05 +00:00
Gabor Juhos
182a18a369 ar71xx: setup WLAN LED for the TL-WA901ND v2
Closes #11889.

SVN-Revision: 33202
2012-08-16 07:11:30 +00:00
Jo-Philipp Wich
a062e08bb4 use bundle-libraries.sh to install required host utilities into imagebuilder staging tree
SVN-Revision: 33196
2012-08-15 13:28:26 +00:00
Gabor Juhos
5d84dabf0f generic: extend pci_isable_usb_common_quirks patch
Fixes the following build error:
  SYSMAP  System.map
  Building modules, stage 2.
  MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2

SVN-Revision: 33193
2012-08-15 13:26:51 +00:00
John Crispin
76954dc8b0 set xen images to gzip compression, fixes #11970
SVN-Revision: 33192
2012-08-15 09:20:12 +00:00
Florian Fainelli
a183ced08e MCS8140 actually selects CPU_ARM926T
Should make inclusion for other MCS814x SoCs easier

SVN-Revision: 33188
2012-08-14 16:19:30 +00:00
John Crispin
5f8ffb8873 fixes gpio_dev un/reload balancing
Signed-off-by: SHI Bin <shibin@ctsing.com>

SVN-Revision: 33183
2012-08-14 12:32:11 +00:00
Florian Fainelli
25792cb971 generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use

Signed-off by: Matthias Buecher <mail@maddes.net>

SVN-Revision: 33174
2012-08-13 14:46:47 +00:00
Gabor Juhos
5fc4b7f5fd ar71xx: uci-defaults/leds for ALL0258N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33165
2012-08-13 14:01:38 +00:00
Florian Fainelli
f164b71189 leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli
f0f10014a0 BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli
9b91c62917 nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Gabor Juhos
82759a1716 ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33145
2012-08-12 12:48:31 +00:00
Gabor Juhos
1525620b0e ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.

As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33144
2012-08-12 12:48:28 +00:00
Gabor Juhos
615a619bc7 ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33143
2012-08-12 12:48:26 +00:00
Gabor Juhos
9365113040 ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.

Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 33142
2012-08-12 12:48:24 +00:00
Gabor Juhos
b942309f4f generic: use __meminit annotation for crashlog_init_memblock
Fixes this section mismatch warning:
WARNING: vmlinux.o(.meminit.text+0xb14): Section mismatch in reference
from the function memblock_insert_region() to the function
.init.text:crashlog_init_memblock()
The function __meminit memblock_insert_region() references
a function __init crashlog_init_memblock().
If crashlog_init_memblock is only used by memblock_insert_region then
annotate crashlog_init_memblock with a matching annotation.

Also, remove the __init annotations from 'include/linux/crashlog.h'

SVN-Revision: 33137
2012-08-12 10:30:41 +00:00
Florian Fainelli
2cf28cff7d only support 128KiB erase block sizes
SVN-Revision: 33131
2012-08-11 12:56:09 +00:00
Florian Fainelli
035b41bafb disable PCI support
None of the boards we support have PCI connectors

SVN-Revision: 33130
2012-08-11 12:56:00 +00:00
Florian Fainelli
639112f0d5 strip a bit more the kernel config
SVN-Revision: 33129
2012-08-11 12:55:51 +00:00
Florian Fainelli
0f91df4de6 properly advertise OHCI and EHCI capabilities
SVN-Revision: 33128
2012-08-11 12:55:41 +00:00
Florian Fainelli
43ddb1d7af change partition names to be more in line with other OpenWrt devices
SVN-Revision: 33127
2012-08-11 12:55:30 +00:00
Florian Fainelli
911a83dffc generate upgrade files suffixed with filesystem type
SVN-Revision: 33126
2012-08-11 12:55:15 +00:00
Florian Fainelli
c16bf519f1 nuport-mac: delay call to napi_start() until fully able to process RX
SVN-Revision: 33079
2012-08-10 07:04:21 +00:00
Florian Fainelli
0028429dfa set a compatible command-line to boot from flash
SVN-Revision: 33078
2012-08-10 07:04:16 +00:00
Gabor Juhos
5dd996bc2a generic: rtl8366_smi: increase delay after switch hw reset
SVN-Revision: 33077
2012-08-10 06:32:00 +00:00
Jo-Philipp Wich
c8a0166212 Fix hard reset of alix/soekris hardware under heavy NIC load
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:

Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882

I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.

The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.

I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.

Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.

I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.

Thanks,
Adam

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 33072
2012-08-09 09:41:22 +00:00
Florian Fainelli
47380a4388 nuport-mac: use dma_mapping_error() instead of checking pointers
Thanks Gabor for spotting this

SVN-Revision: 33071
2012-08-09 09:06:35 +00:00
Florian Fainelli
7f9bfa3fcd nuport-mac: rework PHY interrupt configuration to avoid races
SVN-Revision: 33070
2012-08-08 21:51:18 +00:00
Florian Fainelli
5e877f02b4 nuport-mac: close possible race condition during start
SVN-Revision: 33069
2012-08-08 21:51:13 +00:00
Florian Fainelli
35351a28b9 nuport-mac: unmap the DMA buffer when closing device
SVN-Revision: 33068
2012-08-08 21:51:09 +00:00
Florian Fainelli
b77494fa2f nuport-mac: check dma_map_single address return values
SVN-Revision: 33067
2012-08-08 21:51:04 +00:00
Florian Fainelli
798cc28d73 build a Devolo dLAN USB Extender specific image
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.

SVN-Revision: 33066
2012-08-08 21:51:00 +00:00
Florian Fainelli
f8386ecbc6 cleanup image generation
SVN-Revision: 33065
2012-08-08 21:50:55 +00:00
John Crispin
64b385dda7 pci gpio mapping
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
2012-08-08 12:14:43 +00:00
Jonas Gorski
4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver
SVN-Revision: 33004
2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200
SVN-Revision: 33003
2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch
SVN-Revision: 33001
2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code
SVN-Revision: 33000
2012-08-05 12:39:15 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
John Crispin
060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b nuport-mac: properly protect the phy interrupt handler
SVN-Revision: 32951
2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4 Codel: avoid a nul rec_inv_sqrt
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE
SVN-Revision: 32947
2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
SVN-Revision: 32946
2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader
SVN-Revision: 32945
2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
SVN-Revision: 32942
2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config
SVN-Revision: 32941
2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default
SVN-Revision: 32940
2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file
SVN-Revision: 32939
2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
2012-08-01 12:24:52 +00:00