KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ixp4xx: update Gateworks Cambria board support

Browse source 
Several new features for newer boards:
 - add irq mapping for additional devices
 - add platform data for i2c bus to SFP modules
 - add additional UARTs present on some boards
 - increased R/W delay for expansion bus UARTs
 - add additional LEDs present on some boards
 - add GPIO exports and configuration
 - add ENET switch config present on some boards
 - add support for GSC present on some boards
 - added per model setup support for newer boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33644
This commit is contained in:
Felix Fietkau 2012-10-07 23:23:34 +00:00
parent 21d182b9e5
commit ce692ed043
1 changed files with 447 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

458
target/linux/ixp4xx/patches-3.3/190-cambria_support.patch
View file

@ -1,6 +1,6 @@
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
@@ -0,0 +1,74 @@
@@ -0,0 +1,79 @@
+/*
+ * arch/arch/mach-ixp4xx/cambria-pci.c
+ *
@ -55,6 +55,11 @@
+ return IRQ_IXP4XX_GPIO9;
+ else if (slot == 4)
+ return IRQ_IXP4XX_GPIO8;
+ else if (slot == 6)
+ return IRQ_IXP4XX_GPIO10;
+ else if (slot == 15)
+ return IRQ_IXP4XX_GPIO8;
+
+ else return -1;
+}
+
@ -77,26 +82,30 @@
+subsys_initcall(cambria_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
@@ -0,0 +1,574 @@
@@ -0,0 +1,1005 @@
+/*
+ * arch/arm/mach-ixp4xx/cambria-setup.c
+ *
+ * Board setup for the Gateworks Cambria series
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
+ *
+ * based on coyote-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ * Tim Harvey <tharvey@gateworks.com>
+ */
+
+#include <linux/device.h>
+#include <linux/gpio_buttons.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/gw_i2c_pld.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/if_ether.h>
+#include <linux/init.h>
+#include <linux/input.h>
@ -110,14 +119,17 @@
+#include <linux/socket.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
+#include <linux/irq.h>
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+struct cambria_board_info {
+ unsigned char *model;
@ -158,6 +170,38 @@
+ },
+};
+
+#ifdef SFP_SERIALID
+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
+ .sda_pin = 113,
+ .scl_pin = 112,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+};
+
+static struct platform_device cambria_i2c_gpio_sfpa = {
+ .name = "i2c-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &cambria_i2c_gpio_sfpa_data,
+ },
+};
+
+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
+ .sda_pin = 115,
+ .scl_pin = 114,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+};
+
+static struct platform_device cambria_i2c_gpio_sfpb = {
+ .name = "i2c-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &cambria_i2c_gpio_sfpb_data,
+ },
+};
+#endif // #ifdef SFP_SERIALID
+
+static struct eth_plat_info cambria_npec_data = {
+ .phy = 1,
+ .rxq = 4,
@ -221,6 +265,36 @@
+ .start = 0x53000000,
+ .end = 0x53000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x52000000,
+ .end = 0x52000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x52000000,
+ .end = 0x52000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x52000000,
+ .end = 0x52000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x52000000,
+ .end = 0x52000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x52000000,
+ .end = 0x52000fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x53000000,
+ .end = 0x53000fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
@ -230,14 +304,44 @@
+ .iotype = UPIO_MEM_DELAY,
+ .regshift = 0,
+ .uartclk = 1843200,
+ .rw_delay = 2,
+ .rw_delay = 10,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM_DELAY,
+ .regshift = 0,
+ .uartclk = 1843200,
+ .rw_delay = 2,
+ .rw_delay = 10,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 18432000,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 18432000,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 18432000,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 18432000,
+ },
+ {
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 18432000,
+ },
+ { },
+};
@ -280,9 +384,24 @@
+
+static struct gpio_led cambria_gpio_leds[] = {
+ {
+ .name = "user", /* green led */
+ .name = "user",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "user2",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "user3",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "user4",
+ .gpio = 0,
+ .active_low = 1,
+ }
+};
+
@ -304,6 +423,100 @@
+ },
+};
+
+static struct gpio cambria_gpios_gw2350[] = {
+ // ARM GPIO
+#if 0 // configured from bootloader
+ { 0, GPIOF_IN, "ARM_DIO0" },
+ { 1, GPIOF_IN, "ARM_DIO1" },
+ { 2, GPIOF_IN, "ARM_DIO2" },
+ { 3, GPIOF_IN, "ARM_DIO3" },
+ { 4, GPIOF_IN, "ARM_DIO4" },
+ { 5, GPIOF_IN, "ARM_DIO5" },
+ { 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
+#endif
+ { 8, GPIOF_IN, "ARM_DIO8" },
+ { 9, GPIOF_IN, "ARM_DIO9" },
+};
+
+static struct gpio cambria_gpios_gw2358[] = {
+ // ARM GPIO
+#if 0 // configured from bootloader
+ { 0, GPIOF_IN, "*VINLOW#" },
+ { 2, GPIOF_IN, "*GPS_PPS" },
+ { 3, GPIOF_IN, "*GPS_IRQ#" },
+ { 4, GPIOF_IN, "*RS485_IRQ#" },
+ { 5, GPIOF_IN, "*SER_EN#" },
+ { 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
+#endif
+};
+
+static struct gpio cambria_gpios_gw2359[] = {
+ // ARM GPIO
+#if 0 // configured from bootloader
+ { 0, GPIOF_IN, "*PCA_IRQ#" },
+ { 1, GPIOF_IN, "ARM_DIO1" },
+ { 2, GPIOF_IN, "ARM_DIO2" },
+ { 3, GPIOF_IN, "ARM_DIO3" },
+ { 4, GPIOF_IN, "ARM_DIO4" },
+ { 5, GPIOF_IN, "ARM_DIO5" },
+ { 8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
+#endif
+ { 11, GPIOF_OUT_INIT_HIGH, "*SER_EN" }, // console serial enable
+ { 12, GPIOF_IN, "*GSC_IRQ#" },
+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
+ // GSC GPIO
+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+ {100, GPIOF_IN, "*USER_PB#" },
+#endif
+ {103, GPIOF_OUT_INIT_HIGH, "*5V_EN" }, // 5V aux supply enable
+ {108, GPIOF_IN, "*SMUXDA0" },
+ {109, GPIOF_IN, "*SMUXDA1" },
+ {110, GPIOF_IN, "*SMUXDA2" },
+ {111, GPIOF_IN, "*SMUXDB0" },
+ {112, GPIOF_IN, "*SMUXDB1" },
+ {113, GPIOF_IN, "*SMUXDB2" },
+ // PCA GPIO
+ {118, GPIOF_IN, "*USIM2_DET#"}, // USIM2 Detect
+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCI, 0=FP)
+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCI, 0=FP)
+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
+ {123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" }, // J21/J10
+ {124, GPIOF_IN, "*COM1_DSR#" }, // J21/J10
+ {127, GPIOF_IN, "PCA_DIO0" },
+ {128, GPIOF_IN, "PCA_DIO1" },
+ {129, GPIOF_IN, "PCA_DIO2" },
+ {130, GPIOF_IN, "PCA_DIO3" },
+ {131, GPIOF_IN, "PCA_DIO4" },
+};
+
+static struct gpio cambria_gpios_gw2360[] = {
+ // ARM GPIO
+ { 0, GPIOF_IN, "*PCA_IRQ#" },
+ { 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
+ { 12, GPIOF_IN, "*GSC_IRQ#" },
+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
+ // GSC GPIO
+#if !(defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+ {100, GPIOF_IN, "*USER_PB#" },
+#endif
+ {108, GPIOF_OUT_INIT_LOW, "*ENET1_EN#" }, // ENET1 TX Enable
+ {109, GPIOF_IN, "*ENET1_PRES#" }, // ENET1 Detect (0=SFP present)
+ {110, GPIOF_OUT_INIT_LOW, "*ENET2_EN#" }, // ENET2 TX Enable
+ {111, GPIOF_IN, "*ENET2_PRES#"}, // ENET2 Detect (0=SFP present)
+ // PCA GPIO
+ {116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"}, // USIM2 Select (1=Loc, 0=Rem)
+ {117, GPIOF_IN, "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
+ {118, GPIOF_IN, "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCIe1, 0=J1)
+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCIe2, 0=J1)
+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
+ {127, GPIOF_IN, "DIO0" },
+ {128, GPIOF_IN, "DIO1" },
+ {129, GPIOF_IN, "DIO2" },
+ {130, GPIOF_IN, "DIO3" },
+ {131, GPIOF_IN, "DIO4" },
+};
+
+static struct platform_device cambria_gpio = {
+ .name = "GPIODEV",
+ .id = -1,
@ -445,6 +658,25 @@
+ &cambria_uart,
+};
+
+static int cambria_register_gpio(struct gpio *array, size_t num)
+{
+ int i, err, ret;
+
+ ret = 0;
+ for (i = 0; i < num; i++, array++) {
+ const char *label = array->label;
+ if (label[0] == '*')
+ label++;
+ err = gpio_request_one(array->gpio, array->flags, label);
+ if (err)
+ ret = err;
+ else {
+ err = gpio_export(array->gpio, array->label[0] != '*');
+ }
+ }
+ return ret;
+}
+
+static void __init cambria_gw23xx_setup(void)
+{
+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
@ -483,11 +715,14 @@
+ platform_device_register(&cambria_usb1_device);
+
+ platform_device_register(&cambria_gpio_leds_device);
+
+ /* gpio config (/sys/class/gpio) */
+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
+}
+
+static void __init cambria_gw2358_setup(void)
+{
+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
+ *IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
@ -519,6 +754,175 @@
+ platform_device_register(&cambria_latch_leds_device);
+
+ platform_device_register(&cambria_gpio_buttons_device);
+
+ /* gpio config (/sys/class/gpio) */
+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
+}
+
+static void __init cambria_gw2359_setup(void)
+{
+ platform_device_register(&cambria_gpio);
+
+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
+ /* The mvswitch driver has some hard-coded values which could
+ * easily be turned into a platform resource if needed. For now they
+ * match our hardware configuration:
+ * MV_BASE 0x10 - phy base address
+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
+ *
+ * The mvswitch driver registers a fixup which forces a driver match
+ * if phy_addr matches MV_BASE
+ *
+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
+ * in the other.
+ */
+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
+#else
+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
+ // CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
+ cambria_npec_data.phy = 0x14;
+#endif
+ platform_device_register(&cambria_npec_device);
+ platform_device_register(&cambria_npea_device);
+
+ platform_device_register(&cambria_usb0_device);
+ platform_device_register(&cambria_usb1_device);
+
+ cambria_gpio_leds_data.num_leds = 3;
+ cambria_gpio_leds[0].name = "user1";
+ cambria_gpio_leds[0].gpio = 125; // PNLLED1#
+ cambria_gpio_leds[1].gpio = 126; // PNLLED3#
+ cambria_gpio_leds[2].gpio = 119; // PNLLED4#
+ platform_device_register(&cambria_gpio_leds_device);
+
+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+ cambria_gpio_buttons[0].gpio = 100;
+ platform_device_register(&cambria_gpio_buttons_device);
+#endif
+
+ /* gpio config (/sys/class/gpio) */
+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
+}
+
+static void __init cambria_gw2360_setup(void)
+{
+ /* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
+ * The chip-selects are expanded via a 3-to-8 decoder and CS2
+ * and they are 8bit devices
+ */
+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
+ cambria_optional_uart_data[0].mapbase = 0x52000000;
+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
+ cambria_optional_uart_data[0].uartclk = 18432000;
+ cambria_optional_uart_data[0].iotype = UPIO_MEM;
+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[1].mapbase = 0x52000008;
+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
+ cambria_optional_uart_data[1].uartclk = 18432000;
+ cambria_optional_uart_data[1].iotype = UPIO_MEM;
+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[2].mapbase = 0x52000010;
+ cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
+ cambria_optional_uart_data[2].uartclk = 18432000;
+ cambria_optional_uart_data[2].iotype = UPIO_MEM;
+ cambria_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO4;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[3].mapbase = 0x52000018;
+ cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
+ cambria_optional_uart_data[3].uartclk = 18432000;
+ cambria_optional_uart_data[3].iotype = UPIO_MEM;
+ cambria_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO5;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[4].mapbase = 0x52000020;
+ cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
+ cambria_optional_uart_data[4].uartclk = 18432000;
+ cambria_optional_uart_data[4].iotype = UPIO_MEM;
+ cambria_optional_uart_data[4].irq = IRQ_IXP4XX_GPIO8;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[5].mapbase = 0x52000028;
+ cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
+ cambria_optional_uart_data[5].uartclk = 18432000;
+ cambria_optional_uart_data[5].iotype = UPIO_MEM;
+ cambria_optional_uart_data[5].irq = IRQ_IXP4XX_GPIO9;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart_data[6].mapbase = 0x52000030;
+ cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
+ cambria_optional_uart_data[6].uartclk = 18432000;
+ cambria_optional_uart_data[6].iotype = UPIO_MEM;
+ cambria_optional_uart_data[6].irq = IRQ_IXP4XX_GPIO10;
+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
+
+ cambria_optional_uart.num_resources = 7,
+ platform_device_register(&cambria_optional_uart);
+
+ platform_device_register(&cambria_gpio);
+
+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
+ /* The mvswitch driver has some hard-coded values which could
+ * easily be turned into a platform resource if needed. For now they
+ * match our hardware configuration:
+ * MV_BASE 0x10 - phy base address
+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
+ *
+ * The mvswitch driver registers a fixup which forces a driver match
+ * if phy_addr matches MV_BASE
+ *
+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
+ * in the other.
+ */
+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
+#else
+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
+#endif
+
+ // disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
+ //cambria_npec_data.noautoneg = 1; // disable autoneg
+ cambria_npec_data.speed_10 = 0; // 100mbps
+ cambria_npec_data.half_duplex = 0; // full-duplex
+ platform_device_register(&cambria_npec_device);
+ platform_device_register(&cambria_npea_device);
+
+ platform_device_register(&cambria_usb0_device);
+ platform_device_register(&cambria_usb1_device);
+
+ cambria_gpio_leds_data.num_leds = 3;
+ cambria_gpio_leds[0].name = "user1";
+ cambria_gpio_leds[0].gpio = 125;
+ cambria_gpio_leds[1].gpio = 126;
+ cambria_gpio_leds[2].gpio = 119;
+ platform_device_register(&cambria_gpio_leds_device);
+
+#if (defined(CONFIG_INPUT_GPIO_BUTTONS) || defined(CONFIG_INPUT_GPIO_BUTTONS_MODULE))
+ cambria_gpio_buttons[0].gpio = 100;
+ platform_device_register(&cambria_gpio_buttons_device);
+#endif
+
+#ifdef SFP_SERIALID
+ /* the SFP modules each have an i2c bus for serial ident via GSC GPIO
+ * To use these the i2c-gpio driver must be changed to use the _cansleep
+ * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
+ * use that anyway as it doesn't operate in an IRQ context).
+ * Additionally the i2c-gpio module must set the gpio to output-high prior
+ * to changing direction to an input to enable internal Pullups
+ */
+ platform_device_register(&cambria_i2c_gpio_sfpa);
+ platform_device_register(&cambria_i2c_gpio_sfpb);
+#endif
+
+ /* gpio config (/sys/class/gpio) */
+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
+}
+
+static struct cambria_board_info cambria_boards[] __initdata = {
@ -526,8 +930,20 @@
+ .model = "GW2350",
+ .setup = cambria_gw2350_setup,
+ }, {
+ .model = "GW2351",
+ .setup = cambria_gw2350_setup,
+ }, {
+ .model = "GW2358",
+ .setup = cambria_gw2358_setup,
+ }, {
+ .model = "GW2359",
+ .setup = cambria_gw2359_setup,
+ }, {
+ .model = "GW2360",
+ .setup = cambria_gw2360_setup,
+ }, {
+ .model = "GW2371",
+ .setup = cambria_gw2358_setup,
+ }
+};
+
@ -576,11 +992,32 @@
+ .setup = at24_setup,
+};
+
+static struct pca953x_platform_data cambria_pca_data = {
+ .gpio_base = 100,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data cambria_pca2_data = {
+ .gpio_base = 116,
+ .irq_base = -1,
+};
+
+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x23),
+ .platform_data = &cambria_pca_data,
+ },
+ {
+ I2C_BOARD_INFO("pca9555", 0x27),
+ .platform_data = &cambria_pca2_data,
+ },
+ {
+ I2C_BOARD_INFO("ds1672", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("gsp", 0x29),
+ },
+ {
+ I2C_BOARD_INFO("ad7418", 0x28),
+ },
+ {
@ -604,10 +1041,10 @@
+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+ platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
+ platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
+
+ cambria_pata_resources[0].start = 0x53e00000;
+ cambria_pata_resources[0].end = 0x53e3ffff;
@ -618,8 +1055,7 @@
+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
+
+ i2c_register_board_info(0, cambria_i2c_board_info,
+ ARRAY_SIZE(cambria_i2c_board_info));
+ i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
+}
+
+static int __init cambria_model_setup(void)