Commit graph

101 commits

Author SHA1 Message Date
Felix Fietkau
4018f15e21 ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47547
2015-11-21 10:55:29 +00:00
Felix Fietkau
155469b1f9 ipq806x: assert AHB PCIe reset during init
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47546
2015-11-21 10:55:17 +00:00
Felix Fietkau
9c114740ef ipq806x: reduce PCIe buffer size setting to fix potential data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47545
2015-11-21 10:55:05 +00:00
Felix Fietkau
49d4a980d7 ipq806x: fix pcie reset gpio definions and move them to the common .dtsi file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47544
2015-11-21 10:54:58 +00:00
Felix Fietkau
575413a779 ipq806x: fix pcie tx0-term-offset setting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47543
2015-11-21 10:54:53 +00:00
Felix Fietkau
44b8472f16 ipq806x: fix device tree nodes for PCI to get rid of I/O and memory offsets
Fixes QCA99x0 detection issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47542
2015-11-21 10:54:48 +00:00
Felix Fietkau
06f79fe841 ipq806x: enable vfpv4 support and set cpu type to cortex-a9
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47468
2015-11-14 14:22:24 +00:00
Jonas Gorski
d9197d8b0c ipq806x: fix BOARD_NAME spellings
the board names used by the upgrade check differ from the device names
in case, so always set them. We can't rely on tolower or similar since
different locales might have different rules for lower case letters, so
set them explicitily.

Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47381
2015-11-04 11:33:31 +00:00
Hauke Mehrtens
55a912f43e kernel: update kernel 3.18 to version 3.18.23
Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47334
2015-11-01 13:45:57 +00:00
Hauke Mehrtens
da94b00df5 kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47252
2015-10-25 17:32:01 +00:00
Hauke Mehrtens
0cd478518f kernel: update 4.1 to 4.1.10
Fixes a regression on spi flash devices (upstream commit 1583eaece6fa).

Changelogs:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.7
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.8
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.9
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.10

096-ipv4-off-by-one-in-continuation-handling-in-proc-net.patch was applied
upstream and dropped.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
[update from 4.1.9 to 4.1.10]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47104
2015-10-04 11:34:39 +00:00
Rafał Miłecki
ffcb268437 ipq806x: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.

The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.

This follows ar71xx, lantiq and partially bcm53xx.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46945
2015-09-15 16:05:10 +00:00
Jonas Gorski
82fb27917b ipq806x: fix uninitialized variable usage in cpufreq-krait
In krait_cpufreq_probe, both freq and max_cpu_freq are never
initialized, so the max_cpu_freq will have a random value at the end.
Fix this by properly initializing max_cpu_freq to 0 and storing the clk
frequency in freq as well, to make it similar to how it's calculated in
krait_set_target.

Fixes the following warnings:

In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
drivers/cpufreq/cpufreq-krait.c: In function 'krait_cpufreq_probe':
include/linux/kernel.h:714:24: warning: 'freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:25: note: 'freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;
                         ^
In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
include/linux/kernel.h:714:24: warning: 'max_cpu_freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:31: note: 'max_cpu_freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46839
2015-09-10 10:09:42 +00:00
Jonas Gorski
bebff6364d ipq806x: modules: fix typo in usb-dwc3-qcom dependencies
The phy driver has its qcom-dwc3 order switched in contrast to the usb
controller driver.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46838
2015-09-10 10:09:36 +00:00
Jonas Gorski
a752ff1f8e ipq806x: fix R7500 kernel generation
Obviously the dummy rootfs must be after the kernel (uImage), not
included in it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46837
2015-09-10 10:09:26 +00:00
Jonas Gorski
8b4df1efd5 ipq806x: add support for Netgear Nighthawk X4 R7500
Add support for the Netgear Nighthawk X4 R7500 and build
appropariate sysupgrade and factory images.

Known issues:
 * 5 GHz wifi not working - there is no quantenna driver
 * One of the USB ports is not working

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46796
2015-09-04 14:46:06 +00:00
Jonas Gorski
6ec4c4b6b9 ipq806x: enable ide led trigger
To use gpio leds as ide leds, we need to enable the trigger to be
included in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46795
2015-09-04 14:45:49 +00:00
Jonas Gorski
05e4d736d1 ipq806x: add support for retrieving macs from mtd
Add support for mtd-mac-address for stmac.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46793
2015-09-04 14:45:40 +00:00
Jonas Gorski
89815d4645 ipq806x: build images and add sysupgrade support for AP148
Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46789
2015-09-04 14:45:00 +00:00
Jonas Gorski
e3f6876623 ipq806x: clear IMAGES for devices
Ensure that IMAGE-less devices won't keep the IMAGES of any previous
devices.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46788
2015-09-04 14:44:51 +00:00
Jonas Gorski
7a962fb55a ipq806x: wrap legacy image in uImage
Wrap the zImage in a uImage header so we can easily boot it from legacy
u-boots.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46787
2015-09-04 14:44:48 +00:00
Jonas Gorski
5686d67d1c ipq806x: rename "rootfs" to "ubi" on nand
OpenWrt expects the ubi paritition to be named "ubi", not "rootfs".

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46786
2015-09-04 14:44:44 +00:00
Jonas Gorski
9f44a347ea ipq806x: enable smem-parser for nand on AP148
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46785
2015-09-04 14:44:36 +00:00
Jonas Gorski
556d483a6f ipq806x: enable ubiblock support
To allow squashfs on ubi, enable ubiblock support in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46782
2015-09-04 14:44:04 +00:00
John Crispin
b0b59a8e75 ipq806x: switch AP148 to using SMEM based MTD parser
*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in
 the kernel config
*Replaces the MTD layout in DT by the dynamic layout provided by the
 SMEM parser for AP148

Using the OF based parser is still possible on platforms which have a
fixed MTD partition layout.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46658
2015-08-17 06:18:15 +00:00
John Crispin
0e33ae8e5d ipq806x: add QCOM SMEM based MTD parser
This patch adds a new parser which uses the SMEM available on IPQ and
some other QCOM platforms to map the MTD partitions.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46657
2015-08-17 06:18:04 +00:00
John Crispin
6529d23267 ipq806x: add SMEM support
2 patches are cherry-picked from the following LKML thread:
*https://lkml.org/lkml/2015/4/11/208

The last patch (036-soc-qcom-add-smem-to-IPQ806x-platforms.patch) is
adding the corresponding DT nodes required for IPQ806x.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46656
2015-08-17 06:17:58 +00:00
John Crispin
6b775f4517 ipq806x: add hwspinlock support
This change cherry-picks the following 3 changes from linux-next:
*fb7737 hwspinlock/core: add device tree support
*19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block
*bd5717 hwspinlock: qcom: Correct msb in regmap_field

We're also adding a patch to add the hardware spinlock device nodes on
IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch).

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46655
2015-08-17 06:17:47 +00:00
Jonas Gorski
c7d8377931 ipq806x: switch to new image build system
Switch ipq806x to the new image build system. Image files might change
slightly their names, but the generated files should not change.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46602
2015-08-14 15:10:54 +00:00
Jonas Gorski
1c56854639 ipq806x: disable dma for spi on linux 4.1 as well
Linux 4.1 is also affected from the dma issue, so remove the dma
proprties there as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46599
2015-08-14 15:10:11 +00:00
Felix Fietkau
6cc5919e8a ipq806x: disable DMA on the SPI flash
Previous patch 6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.

As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46587
2015-08-13 19:02:16 +00:00
Felix Fietkau
3e52c8c357 ipq806x: enable NAND flash support in the kernel
Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.

There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:

root@OpenWrt:/# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "qcom-nandc"
...

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46569
2015-08-07 08:36:36 +00:00
Felix Fietkau
d523866eb3 ipq806x: add NAND flash controller support
These patches add support for ipq806x NAND flash controller. Most of
these are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/8/3/16

This patch just modifies the kernel code, but doesn't change the config.
It should be harmless.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46568
2015-08-07 08:36:31 +00:00
Felix Fietkau
c7bf2accc9 ipq806x: Add ADM support
These are cherry-picked & backported from LKML:
*https://lkml.org/lkml/2015/3/17/19

They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are
applying changes merged since 3.18; they enable mechanisms used by the
ADM driver.

ADM engine is used by the NAND controller, so it is necessary to
bring-up NAND flash support.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46567
2015-08-07 08:36:16 +00:00
Jonas Gorski
caa73eb95c kernel: update 4.1 to 4.1.4
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46560
2015-08-05 13:55:14 +00:00
Felix Fietkau
0b15f91ed6 ipq806x: add ethernet (stmmac) support
We forgot to enable the stmmac driver for 4.1 kernel, so ethernet
interfaces don't show-up on this kernel.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46559
2015-08-04 23:10:18 +00:00
Felix Fietkau
04154f3d33 ipq806x: refresh kernel configs
Remove options which have been moved into the generic config ever since.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46558
2015-08-04 23:10:12 +00:00
Felix Fietkau
0f7de49fa3 ipq806x: fix freeze in PCIe code when booting with an old u-boot
Old bootloader (same ones which have DT disabled) don't perform any PCIe
initialization. The consequence is a freeze during PCIe bring-up on
these old u-boot. Same kernel with a newer bootloaders works fine as
they contain the corresponding PCIe init code.

In this change, we'll add the missing init and make sure the kernel
doesn't rely on some preexisting init to get PCIe to work. That includes
the following changes:
*GPIOs: set function & drive strength
*Clocks: add init code for aux & ref clocks
*PCIe driver: additional init of the hardware controller

Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46557
2015-08-04 23:10:03 +00:00
Felix Fietkau
f7651fdba5 ipq806x: fix pcie pinmux naming in ipq806x dts
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but
the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing
the pinmux numbering to match the controller's one.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46556
2015-08-04 23:09:55 +00:00
Felix Fietkau
c4c986e419 ipq806x: add support for non-dt enabled ap148 bootloader
Certain AP148 platforms (and derivative) use bootloaders which did not
have DT enabled.
In order to support these old platforms, we'll now make the following
modifications:
*explicitely add the memory node in the AP148 DT: this used to be added
 by new u-boot through a run-time patch mechanism. We'll now add it
 explicitely so it works on boots which don't support that feature. New
 boots will have the node twice, the second one will be ignored.
*add the zImage generation next to the FIT image for AP148.

Other platforms using non-DT enabled bootloaders may want to leverage
this zImage code to generate their own firmare as well.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46555
2015-08-04 23:09:43 +00:00
Felix Fietkau
4d1656e813 ipq806x: update bleeding-edge kernel from 4.0 to 4.1
Default kernel doesn't change and stays on 3.18 for now.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46554
2015-08-04 23:09:38 +00:00
John Crispin
096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
Jonas Gorski
0f5b1a3eca kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46063
2015-06-19 11:12:43 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Felix Fietkau
b9ebf29fbd kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45920
2015-06-07 07:32:35 +00:00
John Crispin
f9f093baa3 ipq806x: missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45880
2015-06-03 13:58:30 +00:00
John Crispin
ff324050c3 ipq806x: move stmmac support in the kernel binary
Ethernet GMAC is built-in the SoC, so there is no need to enable it as a
module. We'll just assume we need it. That's what is done for other
platform where this driver is used so it'll make things more consistent.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45871
2015-06-01 20:11:35 +00:00
John Crispin
d2a2eb7e48 ipq806x: replace caf nss-gmac driver by upstream stmmac
This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
2015-05-29 12:26:01 +00:00
John Crispin
72369c2976 ipq806x: enable kernel support for Fixed PHY emulation
Most ipq806x platforms use an ethernet switch, and the new upstream
GMAC driver makes use of the Fixed PHY emulation to force the link
settings despite the lack of PHY.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45830
2015-05-29 12:25:44 +00:00
John Crispin
30bbe0b388 ipq806x: move arm-gic include into pcie patch
This include is necessary starting at the PCIe patch, which has a lower
number. So in order to keep the patches consistent, we'll move the
arm-gic include in the first patch who needs it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45827
2015-05-29 12:25:15 +00:00