Commit graph

189 commits

Author SHA1 Message Date
John Crispin
88df2bd2ff ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.

The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]

Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 44001
2015-01-17 14:06:13 +00:00
John Crispin
2120e48e75 ramips: Fix HooToo HT-TM02 support.
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1.
- Fix board name, as the company name is HooToo and not HOOTOO.
- Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.)

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 43883
2015-01-08 20:26:20 +00:00
Felix Fietkau
7cc5b6f9e9 all targets: remove all =m kernel config symbols
modules build during the kernel compile phase are ignored anyway,
all modules should be built using KernelPackage in
package/kernel/linux/modules/*
selecting the appropriate config symbols there rather than in
target/linux/*/config-*

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43842
2015-01-05 13:02:44 +00:00
Felix Fietkau
8eb074756d ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLIT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43813
2015-01-02 21:53:38 +00:00
Felix Fietkau
aefd3c569c ramips: split mt7621 spi into a separate driver, increase maximum transfer size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43807
2015-01-02 21:52:53 +00:00
Luka Perkov
da53ac677f ralink: DCS-930: enable sound
Camera has microphone; in order to use it by default enable sound support.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43232
2014-11-11 00:08:05 +00:00
John Crispin
d0bf15f235 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
John Crispin
af1207b58c ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867
2014-10-10 08:56:43 +00:00
John Crispin
b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00
John Crispin
17cf9c4593 ralink: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42481
2014-09-12 06:50:46 +00:00
John Crispin
4662c3b847 ralink: dwc_otg->dwc2
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42446
2014-09-08 17:33:16 +00:00
John Crispin
fdc41e2fd7 ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42277
2014-08-25 06:35:46 +00:00
John Crispin
60bf96e3a0 ralink: clean up HAME profiles, remove unnecessary packages.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 42192
2014-08-18 13:09:46 +00:00
John Crispin
bc67bd2295 ralink: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42040
2014-08-07 14:41:19 +00:00
John Crispin
17b8d9c976 ramips: add profile for easyacc wizard8800
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41986
2014-08-03 14:31:18 +00:00
John Crispin
21845cb45d ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41939
2014-08-01 20:51:24 +00:00
John Crispin
2c356c4bb7 ramips: add a profile for AWM003
same as AWM002 but with 64mb RAM

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41797
2014-07-22 09:58:21 +00:00
John Crispin
6134a3de30 target/linux/*: more dead package cleanups
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41574
2014-07-10 20:15:50 +00:00
John Crispin
32e93efc73 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
John Crispin
94802dca60 ralink: wpa does not exist, use wpad-mini instead
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41561
2014-07-10 19:16:19 +00:00
John Crispin
3d81a4ef82 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453
2014-07-02 07:42:44 +00:00
John Crispin
9284956ad8 ramips: cleanup some rt305x profiles
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41271
2014-06-19 14:13:07 +00:00
John Crispin
ab390d6c05 ramips: restore AWM002-EVB profile in asiarf.mk
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board.  This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.

Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41215
2014-06-16 18:54:42 +00:00
John Crispin
6d213a644d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
2014-06-13 09:16:15 +00:00
Felix Fietkau
231f15c9db ramips: fix rt2x00 handling of default packages for subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41145
2014-06-11 17:01:19 +00:00
John Crispin
712dec1027 ramips: add missing profile for DIR-615-D
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40911
2014-06-02 12:43:07 +00:00
John Crispin
583b908bc7 ralink: Enable Asus RT-N10+ in menuconfig targets
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>

SVN-Revision: 40903
2014-06-02 12:41:45 +00:00
John Crispin
cd5f3584e2 ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

SVN-Revision: 40554
2014-04-22 08:08:51 +00:00
John Crispin
3a64ddd0a1 ralink: add HLK-RM04 support
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39237
2014-01-12 12:07:40 +00:00
John Crispin
b4b0a55aab ralink: add mt7621 support
there are still various missing pieces for full support.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39040
2013-12-13 10:53:34 +00:00
John Crispin
c903de043e ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38324
2013-10-07 15:02:44 +00:00
John Crispin
cc58dd26d3 ralink: make cevt systick selectable via kconfig
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38319
2013-10-07 15:02:23 +00:00
Felix Fietkau
a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Gabor Juhos
76a1617063 ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38181
2013-09-25 16:39:23 +00:00
John Crispin
c0f6bf05f4 ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38053
2013-09-19 05:56:46 +00:00
John Crispin
8cd1c99707 ralink: add pinctrl driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38026
2013-09-17 21:45:44 +00:00
Gabor Juhos
a0d6cd4f49 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38002
2013-09-15 17:03:29 +00:00
John Crispin
dc7164d4ef ramips: DIR-610-A1 Support
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 37785
2013-08-14 19:35:27 +00:00
John Crispin
9e5b0cc19c ramips: update v3.10 patches
Sync the patches with those sent upstream for v3.12.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37778
2013-08-14 18:15:15 +00:00
John Crispin
169e184521 ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37640
2013-08-01 14:31:15 +00:00
John Crispin
ce4228b417 ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37639
2013-08-01 14:31:09 +00:00
John Crispin
54968110f1 ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37638
2013-08-01 14:31:04 +00:00
John Crispin
0dc3b44b0d ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37637
2013-08-01 14:30:58 +00:00
John Crispin
23d3b705df ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37636
2013-08-01 14:30:53 +00:00
John Crispin
aaedf6c8c6 ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37635
2013-08-01 14:30:46 +00:00
John Crispin
8dd30fa775 ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
2013-07-27 09:23:52 +00:00
John Crispin
115c6f85cf ramips: enable usb phy support on rt5350
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
2013-07-27 09:23:29 +00:00
John Crispin
f4c4ca0b00 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37563
2013-07-27 09:23:24 +00:00
John Crispin
3ad136d9e3 ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

SVN-Revision: 37521
2013-07-24 08:54:41 +00:00
John Crispin
0cc1e2acb4 ramips: Add support for Huawei HG255D in trunk
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37505
2013-07-22 15:36:39 +00:00