ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
This commit is contained in:
parent
744298b8a0
commit
88df2bd2ff
8 changed files with 152 additions and 0 deletions
|
@ -152,6 +152,10 @@ case $board in
|
|||
nw718)
|
||||
set_usb_led "nw718:amber:usb"
|
||||
;;
|
||||
m2m)
|
||||
set_wifi_led "m2m:blue:wifi"
|
||||
ucidef_set_led_netdev "eth" "Ethernet" "m2m:green:wan" "eth0"
|
||||
;;
|
||||
omni-emb-hpm)
|
||||
ucidef_set_led_default "power" "POWER" "emb:orange:power" "1"
|
||||
ucidef_set_led_netdev "eth" "ETH" "emb:green:eth" "eth0"
|
||||
|
|
|
@ -65,6 +65,11 @@ ramips_setup_interfaces()
|
|||
ucidef_set_interface_lan "eth0.1"
|
||||
;;
|
||||
|
||||
m2m)
|
||||
ucidef_add_switch "switch0" "4"
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
|
||||
wizard8800 | \
|
||||
wl-330n | \
|
||||
wmr300)
|
||||
|
|
|
@ -79,6 +79,9 @@ get_status_led() {
|
|||
hw550-3g)
|
||||
status_led="hw550-3g:green:status"
|
||||
;;
|
||||
m2m)
|
||||
status_led="m2m:blue:wifi"
|
||||
;;
|
||||
m3)
|
||||
status_led="m3:blue:status"
|
||||
;;
|
||||
|
|
|
@ -214,6 +214,9 @@ ramips_board_detect() {
|
|||
*"NW718")
|
||||
name="nw718"
|
||||
;;
|
||||
*"Intenso Memory 2 Move")
|
||||
name="m2m"
|
||||
;;
|
||||
*"Omnima EMB HPM")
|
||||
name="omni-emb-hpm"
|
||||
;;
|
||||
|
|
|
@ -55,6 +55,7 @@ platform_check_image() {
|
|||
ht-tm02 | \
|
||||
hw550-3g | \
|
||||
ip2202 | \
|
||||
m2m | \
|
||||
m3 | \
|
||||
m4 | \
|
||||
mlw221 | \
|
||||
|
|
113
target/linux/ramips/dts/M2M.dts
Normal file
113
target/linux/ramips/dts/M2M.dts
Normal file
|
@ -0,0 +1,113 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "rt5350.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "M2M", "ralink,rt5350-soc";
|
||||
model = "Intenso Memory 2 Move";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS1,57600n8 root=/dev/mtdblock5";
|
||||
};
|
||||
|
||||
palmbus@10000000 {
|
||||
uart@500 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi@b00 {
|
||||
status = "okay";
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mx25l6405d";
|
||||
reg = <0 0>;
|
||||
linux,modalias = "m25p80", "mx25l6405d";
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "Config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "Factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "jtag", "uartf";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
wifi {
|
||||
label = "m2m:blue:wifi";
|
||||
gpios = <&gpio0 7 1>;
|
||||
};
|
||||
wan {
|
||||
label = "m2m:green:wan";
|
||||
gpios = <&gpio0 12 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
power {
|
||||
label = "power";
|
||||
gpios = <&gpio0 1 1>;
|
||||
linux,code = <0x116>;
|
||||
};
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 10 1>;
|
||||
linux,code = <0x198>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@10100000 {
|
||||
mtd-mac-address = <&factory 0x28>;
|
||||
};
|
||||
|
||||
esw@10110000 {
|
||||
ralink,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
ehci@101c0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ohci@101c1000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wmac@10180000 {
|
||||
ralink,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
};
|
|
@ -546,6 +546,8 @@ Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS
|
|||
nw718_mtd_size=3801088
|
||||
Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
|
||||
|
||||
Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
|
||||
|
||||
Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
|
||||
|
||||
Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG)
|
||||
|
@ -694,6 +696,7 @@ define Image/Build/Profile/Default
|
|||
$(call Image/Build/Profile/HT-TM02,$(1))
|
||||
$(call Image/Build/Profile/HW550-3G,$(1))
|
||||
$(call Image/Build/Profile/IP2202,$(1))
|
||||
$(call Image/Build/Profile/M2M,$(1))
|
||||
$(call Image/Build/Profile/M3,$(1))
|
||||
$(call Image/Build/Profile/M4,$(1))
|
||||
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
|
||||
|
|
20
target/linux/ramips/rt305x/profiles/m2m.mk
Normal file
20
target/linux/ramips/rt305x/profiles/m2m.mk
Normal file
|
@ -0,0 +1,20 @@
|
|||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/M2M
|
||||
NAME:=Intenso Memory 2 Move
|
||||
PACKAGES:=\
|
||||
kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio \
|
||||
kmod-usb-core kmod-usb2 kmod-usb-storage kmod-scsi-core \
|
||||
kmod-fs-ext4 kmod-fs-vfat block-mount
|
||||
endef
|
||||
|
||||
define Profile/M2M/Description
|
||||
Package set for Intenso Memory 2 Move USB 3.0
|
||||
endef
|
||||
|
||||
$(eval $(call Profile,M2M))
|
Loading…
Reference in a new issue