KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
25094 commits 3 branches 0 tags 154 MiB
Commit graph

669 commits

Author SHA1 Message Date
Florian Fainelli
9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V 
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
 2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854 bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
 2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
 2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26874
 2011-05-11 13:33:41 +00:00
Florian Fainelli
de02a2795b fill maintainer infos for a couple of targets 
SVN-Revision: 26836
 2011-05-06 12:37:36 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Felix Fietkau
1fcd26091b brcm63xx: remove patches/configs for 2.6.35 
SVN-Revision: 26709
 2011-04-17 18:39:46 +00:00
Daniel Dickinson
8b18ce6807 Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. 
SVN-Revision: 26699
 2011-04-17 01:15:47 +00:00
Daniel Dickinson
0d722113b9 Generate images for RTA1320_16M-based routers 
SVN-Revision: 26681
 2011-04-15 14:31:36 +00:00
Daniel Dickinson
f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field 
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
 2011-04-15 12:18:25 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Daniel Dickinson
33b864e899 Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices. 
SVN-Revision: 26387
 2011-03-31 06:16:23 +00:00
Florian Fainelli
aa580d336b bcm63xx: Really fix the flash driver in 2.6.37 
Read back the actual rootfs length from the image tag.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25938
 2011-03-07 16:55:01 +00:00
Florian Fainelli
9dd1454044 fix patches after 2.6.37 update, patch from KanjiMonster 
SVN-Revision: 25810
 2011-03-01 16:02:38 +00:00
Florian Fainelli
94a22b91fc add support for 2.6.37, patches from KanjiMonster 
SVN-Revision: 25629
 2011-02-20 19:59:22 +00:00
Florian Fainelli
8cc16aa14e add support for HW553 bcm6358-based boards (#8844) 
SVN-Revision: 25590
 2011-02-19 15:44:06 +00:00
Florian Fainelli
b7f8e1276d add support for 'MAGIC' bcm6348-based board 
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.

I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )

Thanks to KanjiMonster for the support on the IRC channel.

Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>

SVN-Revision: 25584
 2011-02-19 12:44:27 +00:00
Florian Fainelli
31709b2c76 update to 2.6.35.11 
SVN-Revision: 25582
 2011-02-19 12:44:16 +00:00
Florian Fainelli
2d3ed6dc2d fix T-Com Speedport W 500V default config 
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25431
 2011-02-09 13:09:02 +00:00
Florian Fainelli
e75274de89 fix build of brcm-wl 
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25420
 2011-02-08 13:46:12 +00:00
Florian Fainelli
bed53c93d6 give some credits to Tanguy Bouzeloc in the spi driver 
SVN-Revision: 25133
 2011-01-27 02:11:08 +00:00
Florian Fainelli
c6d9ec5173 multiple SPI driver fixes 
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts

Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 24849
 2010-12-29 16:19:59 +00:00
Daniel Dickinson
dc9c1ac1f7 patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). 
SVN-Revision: 24843
 2010-12-28 08:10:32 +00:00
Daniel Dickinson
5ee2a6c696 patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. 
SVN-Revision: 24842
 2010-12-28 04:05:04 +00:00
Florian Fainelli
093ebfe217 spi driver: remove bcm_rset usage 
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced  by
"bs->regs" field for all I/O operation.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 24840
 2010-12-28 00:24:50 +00:00
Daniel Dickinson
fc3a1d0ba3 Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24838
 2010-12-26 04:18:13 +00:00
Daniel Dickinson
6ee5411686 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24836
 2010-12-26 04:18:04 +00:00
Daniel Dickinson
31f7259e3e mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24834
 2010-12-26 04:17:56 +00:00
Daniel Dickinson
44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
SVN-Revision: 24442
 2010-12-10 18:59:58 +00:00
Daniel Dickinson
7224337d71 Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
SVN-Revision: 24316
 2010-12-08 00:40:31 +00:00
Daniel Dickinson
2a86dcc3d6 Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
SVN-Revision: 24315
 2010-12-08 00:40:28 +00:00
Daniel Dickinson
c6ef9a0720 Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
SVN-Revision: 24314
 2010-12-08 00:40:24 +00:00
Daniel Dickinson
f8ed133c0a patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
SVN-Revision: 24310
 2010-12-07 17:32:29 +00:00
Daniel Dickinson
0e839ea40d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

SVN-Revision: 24308
 2010-12-07 17:02:31 +00:00
Daniel Dickinson
183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise 
SVN-Revision: 24307
 2010-12-07 16:42:23 +00:00
Daniel Dickinson
8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
SVN-Revision: 24305
 2010-12-07 15:15:54 +00:00
Daniel Dickinson
3baa168e09 patches: Refreshed patches after led_count 
SVN-Revision: 24304
 2010-12-07 15:15:51 +00:00
Daniel Dickinson
b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
SVN-Revision: 24303
 2010-12-07 15:15:47 +00:00
Daniel Dickinson
e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
SVN-Revision: 24302
 2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
SVN-Revision: 24276
 2010-12-06 06:46:03 +00:00
Daniel Dickinson
244db5ac6a board definition: Fixed CPVA642 LED definitions 
SVN-Revision: 24275
 2010-12-06 06:45:57 +00:00
Daniel Dickinson
8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
SVN-Revision: 24274
 2010-12-06 04:31:23 +00:00
Daniel Dickinson
7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 
SVN-Revision: 24273
 2010-12-06 02:01:08 +00:00
Daniel Dickinson
9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
SVN-Revision: 24191
 2010-11-28 22:13:00 +00:00
Daniel Dickinson
314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
 2010-11-28 22:04:44 +00:00
Daniel Dickinson
3a49f669f2 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
 2010-11-28 22:04:40 +00:00
Daniel Dickinson
c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
 2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
 2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
 2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
 2010-11-28 22:04:19 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Daniel Dickinson
195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
SVN-Revision: 24127
 2010-11-24 11:06:13 +00:00
Daniel Dickinson
0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
SVN-Revision: 24118
 2010-11-23 20:17:08 +00:00
Daniel Dickinson
049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
SVN-Revision: 24040
 2010-11-19 13:41:54 +00:00
Daniel Dickinson
eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). 
SVN-Revision: 24011
 2010-11-16 06:46:53 +00:00
Claudio Mignanti
7583fe8668 Add wps button on alice gate 
SVN-Revision: 23903
 2010-11-06 21:08:44 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli
ffc84cf75c register uart driver on livebox (#8013) 
SVN-Revision: 23653
 2010-10-27 10:02:13 +00:00
Florian Fainelli
7bf5647070 refresh 2.6.35 patches 
SVN-Revision: 23652
 2010-10-27 10:02:08 +00:00
Claudio Mignanti
697d3e7066 Fix nxp_74hc164 driver compile error (builbot) 
SVN-Revision: 23623
 2010-10-24 16:10:41 +00:00
Florian Fainelli
20d28f7685 fix platform_devices registration 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 23517
 2010-10-18 19:49:54 +00:00
Florian Fainelli
af0e5167bc add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558) 
SVN-Revision: 23508
 2010-10-17 17:45:50 +00:00
Florian Fainelli
9d9e3fed62 remove 2.6.32 support 
SVN-Revision: 23505
 2010-10-17 16:32:35 +00:00
Florian Fainelli
a1ea84dbb6 fix SPI driver, move register out of driver code 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com

SVN-Revision: 23504
 2010-10-17 14:09:30 +00:00
Florian Fainelli
1a13c39f76 restore kernel oldconfig 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23503
 2010-10-17 14:09:24 +00:00
Florian Fainelli
265bf2ccb0 refresh patches 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23502
 2010-10-17 14:09:04 +00:00
Florian Fainelli
9f4c51acb7 refresh nb4 support. Register 74x164 device 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23501
 2010-10-17 14:08:57 +00:00
Florian Fainelli
8cbd9d5a2e add spi devices board info int bcm63xx_boards 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23500
 2010-10-17 14:08:51 +00:00
Florian Fainelli
b65e494976 add 74x164 SPI chip support 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23499
 2010-10-17 14:08:45 +00:00
Florian Fainelli
cd9b90235c backport SPI master with no RXTX support (from 2.6.36) 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23498
 2010-10-17 14:08:39 +00:00
Florian Fainelli
d5854cfd4d register earlier extended platform devices 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23497
 2010-10-17 14:08:34 +00:00
Lars-Peter Clausen
83d6a36019 update 2.6.35.x to 2.6.35.7 
SVN-Revision: 23213
 2010-10-04 07:42:32 +00:00
Florian Fainelli
bbca651e1b remove wpa-supplicant and iw from the Tecom GW6x00 profile 
SVN-Revision: 23051
 2010-09-13 08:30:35 +00:00
Florian Fainelli
d3e206ad96 default to using 2.6.35 
SVN-Revision: 23038
 2010-09-12 21:23:53 +00:00
Florian Fainelli
dc1302fdf9 remove 2.6.33 support 
SVN-Revision: 23037
 2010-09-12 21:23:47 +00:00
Florian Fainelli
327ac42dca change the Tecom GW6x00 profile to use wl instead of b43 
SVN-Revision: 23036
 2010-09-12 21:23:41 +00:00
Florian Fainelli
f4f789f211 register udc and spi devices at the correct init level 
SVN-Revision: 23035
 2010-09-12 21:23:35 +00:00
Florian Fainelli
fab2e77357 refresh 2.6.35 patches 
SVN-Revision: 23034
 2010-09-12 21:23:29 +00:00
Jo-Philipp Wich
867ac59ff9 enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx 
SVN-Revision: 22846
 2010-08-30 22:59:20 +00:00
Florian Fainelli
2e343d9760 add 2.6.35 support 
SVN-Revision: 22800
 2010-08-25 19:56:08 +00:00
Florian Fainelli
b1becffa5b update to 2.6.32.20 
SVN-Revision: 22766
 2010-08-22 17:07:37 +00:00
Daniel Dickinson
a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off 
SVN-Revision: 22466
 2010-08-02 19:33:08 +00:00
Daniel Dickinson
d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit 
SVN-Revision: 22465
 2010-08-02 19:32:59 +00:00
Daniel Dickinson
99d0f9ea05 patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 
SVN-Revision: 22464
 2010-08-02 19:32:40 +00:00
Jo-Philipp Wich
00cc52f14b reorder profiles 
SVN-Revision: 22390
 2010-07-26 18:58:35 +00:00
Jo-Philipp Wich
7831006360 fix a typo in 040-bcm963xx_flashmap.patch 
SVN-Revision: 22386
 2010-07-25 00:10:37 +00:00
Imre Kaloz
ca8f45b142 update kernel versions 
SVN-Revision: 22289
 2010-07-19 11:34:03 +00:00
Florian Fainelli
f6935a4bdb fix alice gate2 internet:green led (#6743) 
SVN-Revision: 22273
 2010-07-18 10:29:44 +00:00
Jo-Philipp Wich
abdf25b045 add required exports for wl.ko 
SVN-Revision: 22174
 2010-07-13 17:03:56 +00:00
Claudio Mignanti
2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
SVN-Revision: 22145
 2010-07-12 14:06:13 +00:00
Jo-Philipp Wich
1650f33f97 add a wifi profile for proprietary wl 
SVN-Revision: 22009
 2010-07-01 01:39:04 +00:00
Florian Fainelli
fb94196462 add missing alice gate2 leds (#6743) 
SVN-Revision: 21785
 2010-06-13 12:20:53 +00:00
Florian Fainelli
145fd381d7 do not override cfg80211-related config symbols 
SVN-Revision: 21769
 2010-06-12 18:10:16 +00:00
Gabor Juhos
9bc1e548a1 generic: move more common options to generic configuration 
* CONFIG_ABX500_CORE
 * CONFIG_ATOMIC64_SELFTEST
 * CONFIG_BRIDGE_IGMP_SNOOPING
 * CONFIG_CAIF
 * CONFIG_CEPH_FS
 * CONFIG_CRYSTALHD
 * CONFIG_DEFAULT_SECURITY_SELINUX
 * CONFIG_DEFAULT_SECURITY_SMACK
 * CONFIG_DEFAULT_SECURITY_TOMOYO
 * CONFIG_DT3155
 * CONFIG_IP_MROUTE_MULTIPLE_TABLES
 * CONFIG_L2TP
 * CONFIG_LOGFS
 * CONFIG_LPC_SCH
 * CONFIG_MFD_JANZ_CMODIO
 * CONFIG_MFD_RDC321X
 * CONFIG_N_GSM
 * CONFIG_RAMOOPS
 * CONFIG_SERIAL_ALTERA_JTAGUART
 * CONFIG_SERIAL_ALTERA_UART
 * CONFIG_SERIAL_TIMBERDALE
 * CONFIG_SM_FTL
 * CONFIG_SQUASHFS_XATTRS

SVN-Revision: 21750
 2010-06-10 10:45:51 +00:00
Gabor Juhos
2f328ce488 generic: move some common symbols to generic configuration 
* CONFIG_MUTEX_SPIN_ON_OWNER
 * CONFIG_DEFAULT_HYDLA
 * CONFIG_DEFAULT_VENO

SVN-Revision: 21748
 2010-06-10 08:58:14 +00:00
Gabor Juhos
5cad9d5c73 generic: standardize CONFIG_INLINE_* symbols usage 
SVN-Revision: 21746
 2010-06-10 08:09:41 +00:00
Daniel Dickinson
f296eeab53 brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design) 
SVN-Revision: 21631
 2010-05-30 02:04:56 +00:00
Daniel Dickinson
6a267cfa76 brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods 
SVN-Revision: 21630
 2010-05-30 01:44:37 +00:00
Daniel Dickinson
40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21629
 2010-05-30 01:33:20 +00:00
Daniel Dickinson
82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21628
 2010-05-30 01:33:09 +00:00
Daniel Dickinson
cc8fba8441 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) 
SVN-Revision: 21627
 2010-05-30 01:32:58 +00:00
Daniel Dickinson
bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21626
 2010-05-30 01:32:47 +00:00
Nicolas Thill
e74e289fa8 update linux kernel to 2.6.32.14 
SVN-Revision: 21583
 2010-05-27 18:09:09 +00:00
Nicolas Thill
46e2eea1ef target/linux: refresh 2.6.32 patches 
SVN-Revision: 21566
 2010-05-24 20:35:46 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Florian Fainelli
f89ff525ee revert r21085, fixes #7282 
SVN-Revision: 21352
 2010-05-04 08:07:39 +00:00
Florian Fainelli
1017215649 do not write to per-port over-current register, which is bogus (#6898) 
SVN-Revision: 21306
 2010-05-02 19:14:10 +00:00
Raphaël Huck
f87eac79bb rename reset_buttons to buttons 
SVN-Revision: 21255
 2010-04-29 12:54:24 +00:00
Raphaël Huck
ccfe1f7886 add WPS button support for nb4 boards 
SVN-Revision: 21254
 2010-04-29 12:51:41 +00:00
Raphaël Huck
b29ef93886 fix gpio button key code, match button-hotplug code 
SVN-Revision: 21253
 2010-04-29 12:51:02 +00:00
Raphaël Huck
5af6e7724b fix gpio_button device register 
SVN-Revision: 21252
 2010-04-29 12:50:09 +00:00
Raphaël Huck
73e450f44a fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel 
SVN-Revision: 21231
 2010-04-28 12:30:32 +00:00
Raphaël Huck
1a07f81239 extend bcm63xx_wdt driver for debugging purposes, thx Miguel 
SVN-Revision: 21199
 2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis
fdac9ae836 sync to kernel 2.6.32.12 
SVN-Revision: 21195
 2010-04-27 14:30:08 +00:00
Raphaël Huck
8df378a918 add neufbox 4 board support, thx Miguel & Florian 
SVN-Revision: 21193
 2010-04-27 13:49:31 +00:00
Raphaël Huck
266c0bf900 add NXP 74HC164 chip driver support, thx Miguel & Florian 
SVN-Revision: 21192
 2010-04-27 13:48:26 +00:00
Raphaël Huck
cf1654354b add extended platform devices patch, thx Miguel & Florian 
SVN-Revision: 21191
 2010-04-27 13:46:22 +00:00
Florian Fainelli
d15e136deb fix spi chip select configuration 
SVN-Revision: 21164
 2010-04-26 13:33:48 +00:00
Florian Fainelli
84dd37d930 fix bcm6358 spi base register address (#7234) 
SVN-Revision: 21163
 2010-04-26 09:22:27 +00:00
Florian Fainelli
52231f694d the SPI_CMD register is 16-bits wide 
SVN-Revision: 21162
 2010-04-26 09:22:23 +00:00
Nicolas Thill
b1b2b04639 package/kernel: move PCMCIA modules to their own file & submenu 
SVN-Revision: 21136
 2010-04-24 13:53:31 +00:00
Nicolas Thill
484051d055 package/kernel: move target specific modules to their own target files 
SVN-Revision: 21132
 2010-04-24 13:34:51 +00:00
Florian Fainelli
2bab1a43be register spi controller, remove whitespaces 
SVN-Revision: 21096
 2010-04-22 16:35:49 +00:00
Florian Fainelli
6b423d5ecb resync 2.6.33 mtd patch with the one for 2.6.32 
SVN-Revision: 21095
 2010-04-22 16:35:44 +00:00
Florian Fainelli
41836b16bb fix wrong refresh on flashmap patch 
SVN-Revision: 21094
 2010-04-22 16:35:01 +00:00
Florian Fainelli
ca3e07d639 re-instate SPI support 
SVN-Revision: 21087
 2010-04-22 15:27:51 +00:00
Florian Fainelli
0b47141194 refresh 2.6.32 patches 
SVN-Revision: 21086
 2010-04-22 15:27:46 +00:00
Florian Fainelli
be2a5389e6 alwasy read imagetag with 64K erase block size 
SVN-Revision: 21085
 2010-04-22 15:27:42 +00:00
Gabor Juhos
81062a12ac kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels 
SVN-Revision: 21081
 2010-04-22 07:12:09 +00:00
Daniel Dickinson
fe5d55977e tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120 
SVN-Revision: 20850
 2010-04-14 00:45:48 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files 
SVN-Revision: 20834
 2010-04-12 23:15:56 +00:00
Florian Fainelli
b87e590b24 do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 
SVN-Revision: 20765
 2010-04-09 18:43:36 +00:00
Florian Fainelli
2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. 
SVN-Revision: 20652
 2010-04-01 21:20:43 +00:00
Florian Fainelli
dad85cddac move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it 
SVN-Revision: 20548
 2010-03-28 18:11:06 +00:00
Gabor Juhos
e66a368bd1 kernel: update to 2.6.32.10 
SVN-Revision: 20444
 2010-03-26 10:45:25 +00:00
Florian Fainelli
10d4e5b4b0 drop support for 2.6.30 kernel 
SVN-Revision: 20438
 2010-03-26 10:12:48 +00:00
Florian Fainelli
928dfc550f add support for D4PW board, patch from mexit 
SVN-Revision: 20420
 2010-03-25 12:06:01 +00:00
Florian Fainelli
f2e91995ea refresh 2.6.32 patches, fix livebox support (#6821) 
SVN-Revision: 20204
 2010-03-14 16:21:28 +00:00
Nicolas Thill
e1863691d9 do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) 
SVN-Revision: 20136
 2010-03-11 09:50:11 +00:00
Florian Fainelli
2c13d45b29 do not register devices in device_initcall level, this breaks the SSB SPROM registration 
SVN-Revision: 19957
 2010-03-02 21:49:37 +00:00
Florian Fainelli
0cd5b9983f remove mail headers from patches 
SVN-Revision: 19935
 2010-03-01 14:55:34 +00:00
Florian Fainelli
4f4066d3e0 add support for 2.6.33 
SVN-Revision: 19921
 2010-02-28 21:24:34 +00:00
Florian Fainelli
984ac762e4 add support for 2.6.32, dropped the SPI patch for now 
SVN-Revision: 19919
 2010-02-28 20:50:51 +00:00
Florian Fainelli
ada5848ba6 build images for RG100A (bcm6358-based boards) (#6755) 
SVN-Revision: 19894
 2010-02-28 11:09:39 +00:00
Florian Fainelli
12a2f9b7b8 fix gpio-leds registration for boards having less than 8 LEDs (#6528) 
SVN-Revision: 19793
 2010-02-21 14:27:17 +00:00
Florian Fainelli
8a1f7817d1 fix the receiving of packets with a 1500 mtu and vlan enabled (#6698) 
SVN-Revision: 19753
 2010-02-19 11:56:13 +00:00
Imre Kaloz
825b37cc56 clean up handling of some kernel symbols 
SVN-Revision: 19581
 2010-02-11 09:33:16 +00:00
Florian Fainelli
e716256d86 fix printing of mtd offsets, remove whitespaces. 
SVN-Revision: 19475
 2010-01-31 21:37:25 +00:00
Florian Fainelli
b8d99458ff move files to files-2.6.30, to ease newer kernel integration 
SVN-Revision: 19471
 2010-01-31 21:00:50 +00:00
Daniel Dickinson
022594b0ed brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261 
SVN-Revision: 19361
 2010-01-28 16:54:00 +00:00
Felix Fietkau
2aa0d20756 replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images 
SVN-Revision: 19293
 2010-01-23 17:21:18 +00:00
Daniel Dickinson
f623119680 Fix typo in AGPF_S0 reset button definition 
SVN-Revision: 19160
 2010-01-16 03:13:56 +00:00
Claudio Mignanti
b031e14bf0 bcm63xx: add gpio leds to alice gate 
SVN-Revision: 19152
 2010-01-15 13:30:46 +00:00
Florian Fainelli
a47b8566a1 update to 2.6.30, refresh patches 
SVN-Revision: 18635
 2009-12-04 14:52:45 +00:00
Felix Fietkau
fa0396c530 kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config 
SVN-Revision: 18603
 2009-11-29 14:31:55 +00:00
Florian Fainelli
0adbdf6409 add support for the RTA1025W_16 board (#5979) 
SVN-Revision: 18476
 2009-11-22 14:53:20 +00:00
Imre Kaloz
6b280112f2 some more Kconfig symbol move.. 
SVN-Revision: 18371
 2009-11-11 11:52:41 +00:00
Imre Kaloz
1d62d9a95c another round of kernel config cleanups 
SVN-Revision: 18370
 2009-11-11 11:42:24 +00:00
Imre Kaloz
ef42fb4c13 sort all target config files 
SVN-Revision: 18367
 2009-11-11 09:27:13 +00:00
Florian Fainelli
e9a02ff509 merge upstream fixes on mdio loop 
SVN-Revision: 18335
 2009-11-07 12:48:17 +00:00
Florian Fainelli
9a84de9e01 images without tagid now fallback to the untouched partition layout (#6093) 
SVN-Revision: 18288
 2009-11-03 19:59:04 +00:00
Florian Fainelli
5e7b871d8a remove no longer used configs and patches 
SVN-Revision: 18221
 2009-10-30 09:55:53 +00:00
Florian Fainelli
411d1ba1bb do not generate trx images, this is useless 
SVN-Revision: 18204
 2009-10-29 13:39:29 +00:00
Florian Fainelli
338490bd50 remove 2.6.28 support, we never really used it 
SVN-Revision: 18156
 2009-10-25 21:13:46 +00:00
Florian Fainelli
7100c1efd9 switch to 2.6.30.9 
SVN-Revision: 18155
 2009-10-25 21:10:53 +00:00
Florian Fainelli
46c66bba36 update to 2.6.27.35 
SVN-Revision: 18125
 2009-10-23 09:12:17 +00:00
Nicolas Thill
f22156bf9e brcm63xx: fix cardbus support with BCM6358 (closes: #5918) 
SVN-Revision: 17935
 2009-10-05 20:40:05 +00:00
Andy Boyett
c85a89348f move IMAGE_CMDLINE_HACK default to generic from targets 
SVN-Revision: 17905
 2009-10-05 17:05:34 +00:00
Imre Kaloz
85fcc97a13 update to latest 2.6.27 and 2.6.30 kernels 
SVN-Revision: 17602
 2009-09-17 11:22:33 +00:00
Florian Fainelli
031e6f65ba update to 2.6.27.33 
SVN-Revision: 17569
 2009-09-11 07:45:08 +00:00
Gabor Juhos
47c0d7419f kernel: get rid of the simple_prom_emulator, it is not really useful 
SVN-Revision: 17567
 2009-09-10 18:30:20 +00:00
Gabor Juhos
d59f5b3a98 kernel: add generic image_cmdline hack to MIPS targets 
SVN-Revision: 17563
 2009-09-10 18:30:01 +00:00
Florian Fainelli
43d0be69d7 update to 2.6.27.32 
SVN-Revision: 17548
 2009-09-09 07:13:09 +00:00
Florian Fainelli
b9c0291e32 prevent gpio-buttons registration failure 
SVN-Revision: 17542
 2009-09-08 15:24:06 +00:00
Florian Fainelli
8ceff55a08 fix typos against the gpio buttons driver (#5804) 
SVN-Revision: 17538
 2009-09-07 18:17:45 +00:00
Florian Fainelli
65fa1debda add infrastructure to register gpio-input reset button 
SVN-Revision: 17526
 2009-09-06 13:54:17 +00:00
Florian Fainelli
294ec33e47 fix reboot hang on bcm6345, thanks AndyI 
SVN-Revision: 17465
 2009-09-02 08:32:00 +00:00
Florian Fainelli
63b86723b1 switch to 2.6.27.30 
SVN-Revision: 17291
 2009-08-17 09:17:06 +00:00
Florian Fainelli
3fd180eb53 add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA 
SVN-Revision: 17234
 2009-08-12 08:41:47 +00:00
Florian Fainelli
7610c78205 fix typo, INT_MASK is writable, INT_STATUS is not 
SVN-Revision: 17229
 2009-08-11 18:57:04 +00:00
Florian Fainelli
dd8b0f9fb9 more bcm63xx definition fixes, thanks AndyI 
SVN-Revision: 17227
 2009-08-11 18:50:07 +00:00
Florian Fainelli
85698765da add support for the Pirelli AG226G board (#5337) 
SVN-Revision: 17190
 2009-08-09 10:19:47 +00:00
Florian Fainelli
2d629e3a01 remove useless hard reset in the SPI controller driver 
SVN-Revision: 17189
 2009-08-09 10:18:30 +00:00
Florian Fainelli
2437f53f1d fix assignment instead of comparison in the mtd driver (#5649) 
SVN-Revision: 17188
 2009-08-09 10:08:07 +00:00
Florian Fainelli
8866ab8a02 merge upstream fixes for bcm63xx_enet 
SVN-Revision: 17175
 2009-08-08 11:25:36 +00:00
Florian Fainelli
5138aa203e bcm6345 fixes from AndyI 
SVN-Revision: 17153
 2009-08-06 20:33:42 +00:00
Florian Fainelli
48c1634d3e fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI 
SVN-Revision: 17149
 2009-08-06 18:53:44 +00:00
Florian Fainelli
dd78f746a5 disable watchdog for bcm6345 until it gets fixed 
SVN-Revision: 17148
 2009-08-06 18:44:20 +00:00
Florian Fainelli
39c22483bd fix printing of offsets 
SVN-Revision: 17099
 2009-08-02 13:50:39 +00:00
Florian Fainelli
85119470d2 add experimental support for 2.6.30.4 
SVN-Revision: 17081
 2009-08-01 16:56:36 +00:00
Florian Fainelli
e58d0f346d more bcm6345 fixes and definitions, thanks to AndyI 
SVN-Revision: 17066
 2009-07-31 20:15:43 +00:00
Florian Fainelli
c5879ba76d refresh 2.6.27 patches 
SVN-Revision: 17061
 2009-07-31 11:10:20 +00:00
Florian Fainelli
252607a79c update to 2.6.27.29 
SVN-Revision: 17060
 2009-07-31 11:09:27 +00:00
Florian Fainelli
dd622864e1 generate images for RTA1025W_16-based routers (#5594) 
SVN-Revision: 17058
 2009-07-31 10:47:00 +00:00
Florian Fainelli
9887dc6100 add experimental support for 2.6.28.10, tested on bcm6338 
SVN-Revision: 17054
 2009-07-30 21:29:25 +00:00
Florian Fainelli
3c806e767e enable 6345 support now that it boots up to user-space 
SVN-Revision: 17033
 2009-07-27 23:04:58 +00:00
Florian Fainelli
dabf5e71a6 fix typo for the flash start address on bcm6345 
SVN-Revision: 17032
 2009-07-27 22:31:28 +00:00
Florian Fainelli
103c99b960 switch to 2.6.27.28 
SVN-Revision: 17027
 2009-07-27 10:01:33 +00:00
Florian Fainelli
4d38620058 fix malformed patch 
SVN-Revision: 16975
 2009-07-25 16:18:02 +00:00
Florian Fainelli
755aae526a bcm6345 does not seem to handle r4k_wait correctly, disable it (#5474) 
SVN-Revision: 16971
 2009-07-24 20:25:31 +00:00
Florian Fainelli
c4d517c7bb use 2.6.27.7 
SVN-Revision: 16968
 2009-07-24 17:03:03 +00:00
Florian Fainelli
5df0606265 fix typos introduced in 16942 
SVN-Revision: 16943
 2009-07-21 12:22:01 +00:00
Florian Fainelli
8b17c74376 make the ethernet driver compile with newer kernels 
SVN-Revision: 16942
 2009-07-21 11:48:08 +00:00
Florian Fainelli
43a3f9555a request irq with the platform driver name instead of bus_id which is being removed in newer kernels 
SVN-Revision: 16932
 2009-07-20 10:52:08 +00:00
Florian Fainelli
a0a85ba7c6 we are using the default-on trigger for power LEDs, no need to change their state from userspace 
SVN-Revision: 16892
 2009-07-18 09:27:33 +00:00
Florian Fainelli
ecad504c39 register GPIO-connected LEDs for known boards 
SVN-Revision: 16887
 2009-07-18 00:40:23 +00:00
Florian Fainelli
fe05e1f37a mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358 
SVN-Revision: 16882
 2009-07-17 15:58:06 +00:00
Florian Fainelli
d0fdf2c5ed fix comment only valid for bcm6345 
SVN-Revision: 16881
 2009-07-17 15:57:09 +00:00
Florian Fainelli
349d57eee4 resync kernel configuration and enable kexec 
SVN-Revision: 16795
 2009-07-12 11:31:00 +00:00
Florian Fainelli
9d2522748f add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big 
SVN-Revision: 16709
 2009-07-06 11:28:34 +00:00
Florian Fainelli
9a387036d2 add a profile with no Wi-Fi drivers enabled, useful for bcm6338 
SVN-Revision: 16708
 2009-07-06 11:21:22 +00:00
Florian Fainelli
fefeecf52f update to latest 2.6.27.26 stable kernel 
SVN-Revision: 16659
 2009-07-03 09:31:52 +00:00
Florian Fainelli
0bda624fc7 add the infrastructure to use a MPI/GPIO connected VoIP DSP 
SVN-Revision: 16650
 2009-07-01 21:00:41 +00:00
Florian Fainelli
8a8943671a fixes for the bcm6338 clocks, thanks Maxime 
SVN-Revision: 16640
 2009-07-01 13:49:20 +00:00
Florian Fainelli
5a7c5b2d36 a couple of more fixes to get 6345 booting up to the console handover 
SVN-Revision: 16636
 2009-06-30 13:45:49 +00:00
Florian Fainelli
8179904540 shared DMA zone is twice smaller on 6338 
SVN-Revision: 16608
 2009-06-28 20:06:44 +00:00
Florian Fainelli
e6d307ab4b turn on size optimization for bcm63xx 
SVN-Revision: 16607
 2009-06-28 20:06:13 +00:00
Florian Fainelli
4096da301d off-by-one gpio numbers for bcm6338 
SVN-Revision: 16597
 2009-06-28 04:23:11 +00:00
Florian Fainelli
8813961e86 bcm6338 can support PCI since it has MPI 
SVN-Revision: 16592
 2009-06-27 21:43:55 +00:00
Florian Fainelli
ca5de76ed3 more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly 
SVN-Revision: 16589
 2009-06-27 20:32:43 +00:00
Florian Fainelli
d02d75ba02 fix the flash address comment and register the flash device again with its proper physical address on 6338/6345 
SVN-Revision: 16587
 2009-06-27 18:58:00 +00:00
Florian Fainelli
0bb3a46217 fix a stupid typo preventing the board from being detected 
SVN-Revision: 16586
 2009-06-27 18:30:45 +00:00
Florian Fainelli
bcc1dd7f99 prevent bcm6338 and bcm6345 from crashing very early 
SVN-Revision: 16585
 2009-06-27 18:23:58 +00:00
Florian Fainelli
7da8855c79 only register fallback sprom and enable PCI if we actually have support for PCI 
SVN-Revision: 16581
 2009-06-27 16:17:18 +00:00
Florian Fainelli
bf0942ce5c do not bloat the kernel with experimental bcm6345 for now 
SVN-Revision: 16580
 2009-06-27 15:52:03 +00:00
Florian Fainelli
13a8ed9ca0 more missing register definitions for bcm6338 
SVN-Revision: 16579
 2009-06-27 15:51:27 +00:00
Florian Fainelli
287a2c0ba9 more bcm6338 and bcm6345 related fixes 
SVN-Revision: 16568
 2009-06-26 12:34:35 +00:00
Florian Fainelli
8c4137900c define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338 
SVN-Revision: 16567
 2009-06-26 11:08:12 +00:00
Florian Fainelli
45c25ff988 generate images for the bcm6338w 
SVN-Revision: 16566
 2009-06-26 10:27:37 +00:00
Florian Fainelli
e86e91380a add board definitions for the bcm6338w 
SVN-Revision: 16565
 2009-06-26 10:27:13 +00:00
Florian Fainelli
1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364) 
SVN-Revision: 16506
 2009-06-18 15:00:32 +00:00
Florian Fainelli
606193fc1f generate experimental images for bcm6338 boards, thanks to Daniel Dickinson 
SVN-Revision: 16490
 2009-06-17 13:16:59 +00:00
Florian Fainelli
a68fe5655e use 2.6.27.5 
SVN-Revision: 16486
 2009-06-17 08:46:47 +00:00
Imre Kaloz
c83b031b84 use the same i/o schedulers for all targets 
SVN-Revision: 16479
 2009-06-15 20:43:02 +00:00
Florian Fainelli
cc12508ee3 use build system REVISION variable (#5317) 
SVN-Revision: 16400
 2009-06-10 13:43:48 +00:00
Florian Fainelli
ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. 
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>

SVN-Revision: 16396
 2009-06-10 08:24:13 +00:00
Florian Fainelli
e9c22f7939 cleanup the watchdog driver a bit 
SVN-Revision: 16395
 2009-06-09 21:35:51 +00:00
Florian Fainelli
972619416e fix the watchdog driver and enable it by default 
SVN-Revision: 16394
 2009-06-09 21:28:15 +00:00
Florian Fainelli
01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). 
SVN-Revision: 16393
 2009-06-09 08:04:52 +00:00
Florian Fainelli
4f72fef05e remove this line which got accidentaly succesfully applied, but should not have (#5285) 
SVN-Revision: 16380
 2009-06-08 13:42:11 +00:00
Florian Fainelli
8f84508c25 fix ethernet driver removal 
SVN-Revision: 16335
 2009-06-04 10:04:53 +00:00
Florian Fainelli
50936e1aa5 fix pcmcia device removal 
SVN-Revision: 16334
 2009-06-04 10:04:11 +00:00
Florian Fainelli
116a53a154 add missing null entry in pcmcia driver 
SVN-Revision: 16333
 2009-06-04 10:03:41 +00:00
Florian Fainelli
4049592268 request gpio pins and set direction correctly for pcmcia 
SVN-Revision: 16332
 2009-06-04 10:03:03 +00:00
Florian Fainelli
287a0efd68 be SMP safe even with gpiolib 
SVN-Revision: 16331
 2009-06-04 10:02:23 +00:00
Florian Fainelli
9013e936ed cache gpio values in gpio_set 
SVN-Revision: 16330
 2009-06-04 10:01:55 +00:00
Florian Fainelli
1208ffaedb use the correct number of GPIOs for bcm6358 
SVN-Revision: 16329
 2009-06-04 10:01:03 +00:00
Florian Fainelli
c95420f06d register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback 
SVN-Revision: 16328
 2009-06-04 09:59:28 +00:00
Florian Fainelli
d2b2ce325a merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU. 
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.

SVN-Revision: 16302
 2009-06-03 08:55:18 +00:00
Florian Fainelli
05b40c8d13 backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time 
SVN-Revision: 16277
 2009-06-01 18:27:51 +00:00
Florian Fainelli
9be0df0caa include wpa-supplicant iw in the default profile 
SVN-Revision: 16195
 2009-05-29 15:33:14 +00:00
Florian Fainelli
027d6ac4c5 also include the SPI driver in the gw6x00 profile 
SVN-Revision: 16077
 2009-05-26 11:15:27 +00:00
Florian Fainelli
a94930dbbb include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking 
SVN-Revision: 16075
 2009-05-26 10:25:55 +00:00
Florian Fainelli
fa45acd690 add the Tecom GW6x00 (6000 and 6200) board profile 
SVN-Revision: 16059
 2009-05-25 16:14:13 +00:00
Florian Fainelli
f150bc5e36 update to new stable 2.6.27.24 
SVN-Revision: 15931
 2009-05-20 09:00:09 +00:00
Florian Fainelli
1322e2721a disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211 
SVN-Revision: 15926
 2009-05-19 18:15:19 +00:00
Imre Kaloz
e965c02820 even more config file cleanup 
SVN-Revision: 15913
 2009-05-18 13:21:25 +00:00
Florian Fainelli
ce87c61ae9 add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later 
SVN-Revision: 15911
 2009-05-18 11:11:23 +00:00
Florian Fainelli
0d7f5f8d2c add support for sysupgrade (#5117) 
SVN-Revision: 15900
 2009-05-17 16:53:57 +00:00
Imre Kaloz
91e866f383 config cleanups 
SVN-Revision: 15861
 2009-05-15 10:40:04 +00:00
Imre Kaloz
26b42d5807 cardbus != pcmcia -- disable it in b43 
SVN-Revision: 15857
 2009-05-15 08:58:02 +00:00
Florian Fainelli
480b27e9f9 add missing configuration symbol 
SVN-Revision: 15856
 2009-05-15 07:04:32 +00:00
Imre Kaloz
6bfddb152f some additional config file cleanup.. 
SVN-Revision: 15845
 2009-05-14 13:32:34 +00:00
Imre Kaloz
c83d91fcfc unify congestion control options 
SVN-Revision: 15844
 2009-05-14 12:42:07 +00:00
Imre Kaloz
a9c958c2de make kernels use /etc/preinit by default 
SVN-Revision: 15840
 2009-05-14 10:20:53 +00:00
Florian Fainelli
01be18725f also supports pcmcia 
SVN-Revision: 15693
 2009-05-07 15:25:15 +00:00
Imre Kaloz
e9b397805d some more kernel config cleanup.. last for today :) 
SVN-Revision: 15606
 2009-05-04 20:57:02 +00:00
Imre Kaloz
0f2b1d070a more cleanup 
SVN-Revision: 15605
 2009-05-04 20:31:47 +00:00
Imre Kaloz
a614251e6c cleanup MTD option handling 
SVN-Revision: 15602
 2009-05-04 19:13:43 +00:00
Imre Kaloz
38c5311047 move MFD stuff to the generic kernel configs 
SVN-Revision: 15587
 2009-05-04 13:51:29 +00:00
Imre Kaloz
64fbade939 refresh patches 
SVN-Revision: 15581
 2009-05-04 11:35:08 +00:00
Imre Kaloz
86a4a6edb9 upgrade to newest stable kernel versions 
SVN-Revision: 15575
 2009-05-03 16:58:06 +00:00
Florian Fainelli
a036aca55c now that we register gpiodev, also include gpioctl in the default image 
SVN-Revision: 15510
 2009-04-30 14:09:45 +00:00
Florian Fainelli
9485c3e834 register gpiodev 
SVN-Revision: 15509
 2009-04-30 14:09:01 +00:00
Florian Fainelli
dd2b72105b fix redundant driver name printing in probe function 
SVN-Revision: 15254
 2009-04-19 13:32:54 +00:00
Florian Fainelli
1f334e3caa make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943) 
SVN-Revision: 15253
 2009-04-19 13:18:48 +00:00
Felix Fietkau
34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Florian Fainelli
4bd65101ad do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659) 
SVN-Revision: 15215
 2009-04-12 12:54:38 +00:00
Florian Fainelli
14832d3c23 some more fixes to the SPI controller driver 
SVN-Revision: 15146
 2009-04-08 08:52:57 +00:00
Florian Fainelli
5d5c8300b1 imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885) 
SVN-Revision: 15133
 2009-04-07 13:22:32 +00:00
Florian Fainelli
fb3fbea164 override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358 
SVN-Revision: 15020
 2009-03-24 15:22:07 +00:00
Hauke Mehrtens
f5dc2ce0aa refresh patches 
SVN-Revision: 15018
 2009-03-24 15:09:20 +00:00
Hauke Mehrtens
e82dce69a3 update to kernel version 2.6.27.21 
SVN-Revision: 15016
 2009-03-24 15:05:51 +00:00
Florian Fainelli
501ebb4f74 enable all blocks on 6338 and uart clock on 6345 
SVN-Revision: 14957
 2009-03-21 10:50:44 +00:00
Florian Fainelli
0972ee5331 add support for bcm6345 SoC, needs testing 
SVN-Revision: 14953
 2009-03-20 15:08:02 +00:00
Florian Fainelli
32c29f1aaf fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783) 
SVN-Revision: 14914
 2009-03-17 11:28:54 +00:00
Florian Fainelli
b865f9b722 add the CFE offset command line option to the imagetag utility, closes (#4366) 
SVN-Revision: 14896
 2009-03-16 12:29:11 +00:00
Florian Fainelli
6495fa36ea add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 
SVN-Revision: 14850
 2009-03-12 08:54:04 +00:00
Florian Fainelli
8065eb4a55 do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers 
SVN-Revision: 14848
 2009-03-11 10:32:44 +00:00
Florian Fainelli
51125fb616 make SPI work in full-duplex mode by default 
SVN-Revision: 14841
 2009-03-10 15:28:29 +00:00
Florian Fainelli
add058c382 include kmod-switch in the default images 
SVN-Revision: 14827
 2009-03-09 21:58:49 +00:00
Florian Fainelli
58a11bcb40 package the bcm63xx-spi driver 
SVN-Revision: 14794
 2009-03-08 19:21:55 +00:00
Florian Fainelli
ae1ed9b7f4 add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing 
SVN-Revision: 14793
 2009-03-08 15:27:46 +00:00
Florian Fainelli
871b0d6fed fix SPI accessors 
SVN-Revision: 14792
 2009-03-08 14:20:15 +00:00
Florian Fainelli
1bcf5d0de6 fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code 
SVN-Revision: 14790
 2009-03-08 12:43:13 +00:00
Florian Fainelli
bf7f2939c2 compile and register SPI controller device 
SVN-Revision: 14789
 2009-03-08 12:18:26 +00:00
Florian Fainelli
1e92d0355d make bcm6358 consistend with the other boards naming 
SVN-Revision: 14788
 2009-03-08 12:17:19 +00:00
Florian Fainelli
b1abddb45f fix some SPI register definitions and platform-device registration code 
SVN-Revision: 14787
 2009-03-08 12:13:52 +00:00
Florian Fainelli
5e8dfe53b6 prepare for SPI controller driver 
SVN-Revision: 14755
 2009-03-06 01:15:00 +00:00