add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
SVN-Revision: 17234
This commit is contained in:
parent
7610c78205
commit
3fd180eb53
2 changed files with 332 additions and 0 deletions
|
@ -177,3 +177,291 @@ struct pci_ops bcm63xx_pci_ops = {
|
|||
.read = bcm63xx_pci_read,
|
||||
.write = bcm63xx_pci_write
|
||||
};
|
||||
|
||||
#ifdef CONFIG_CARDBUS
|
||||
/*
|
||||
* emulate configuration read access on a cardbus bridge
|
||||
*/
|
||||
#define FAKE_CB_BRIDGE_SLOT 0x1e
|
||||
|
||||
static int fake_cb_bridge_bus_number = -1;
|
||||
|
||||
static struct {
|
||||
u16 pci_command;
|
||||
u8 cb_latency;
|
||||
u8 subordinate_busn;
|
||||
u8 cardbus_busn;
|
||||
u8 pci_busn;
|
||||
int bus_assigned;
|
||||
u16 bridge_control;
|
||||
|
||||
u32 mem_base0;
|
||||
u32 mem_limit0;
|
||||
u32 mem_base1;
|
||||
u32 mem_limit1;
|
||||
|
||||
u32 io_base0;
|
||||
u32 io_limit0;
|
||||
u32 io_base1;
|
||||
u32 io_limit1;
|
||||
} fake_cb_bridge_regs;
|
||||
|
||||
static int fake_cb_bridge_read(int where, int size, u32 *val)
|
||||
{
|
||||
unsigned int reg;
|
||||
u32 data;
|
||||
|
||||
data = 0;
|
||||
reg = where >> 2;
|
||||
switch (reg) {
|
||||
case (PCI_VENDOR_ID >> 2):
|
||||
case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
|
||||
/* create dummy vendor/device id from our cpu id */
|
||||
data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
|
||||
break;
|
||||
|
||||
case (PCI_COMMAND >> 2):
|
||||
data = (PCI_STATUS_DEVSEL_SLOW << 16);
|
||||
data |= fake_cb_bridge_regs.pci_command;
|
||||
break;
|
||||
|
||||
case (PCI_CLASS_REVISION >> 2):
|
||||
data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
|
||||
break;
|
||||
|
||||
case (PCI_CACHE_LINE_SIZE >> 2):
|
||||
data = (PCI_HEADER_TYPE_CARDBUS << 16);
|
||||
break;
|
||||
|
||||
case (PCI_INTERRUPT_LINE >> 2):
|
||||
/* bridge control */
|
||||
data = (fake_cb_bridge_regs.bridge_control << 16);
|
||||
/* pin:intA line:0xff */
|
||||
data |= (0x1 << 8) | 0xff;
|
||||
break;
|
||||
|
||||
case (PCI_CB_PRIMARY_BUS >> 2):
|
||||
data = (fake_cb_bridge_regs.cb_latency << 24);
|
||||
data |= (fake_cb_bridge_regs.subordinate_busn << 16);
|
||||
data |= (fake_cb_bridge_regs.cardbus_busn << 8);
|
||||
data |= fake_cb_bridge_regs.pci_busn;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_BASE_0 >> 2):
|
||||
data = fake_cb_bridge_regs.mem_base0;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
|
||||
data = fake_cb_bridge_regs.mem_limit0;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_BASE_1 >> 2):
|
||||
data = fake_cb_bridge_regs.mem_base1;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
|
||||
data = fake_cb_bridge_regs.mem_limit1;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_BASE_0 >> 2):
|
||||
/* | 1 for 32bits io support */
|
||||
data = fake_cb_bridge_regs.io_base0 | 0x1;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_LIMIT_0 >> 2):
|
||||
data = fake_cb_bridge_regs.io_limit0;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_BASE_1 >> 2):
|
||||
/* | 1 for 32bits io support */
|
||||
data = fake_cb_bridge_regs.io_base1 | 0x1;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_LIMIT_1 >> 2):
|
||||
data = fake_cb_bridge_regs.io_limit1;
|
||||
break;
|
||||
}
|
||||
|
||||
*val = postprocess_read(data, where, size);
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
/*
|
||||
* emulate configuration write access on a cardbus bridge
|
||||
*/
|
||||
static int fake_cb_bridge_write(int where, int size, u32 val)
|
||||
{
|
||||
unsigned int reg;
|
||||
u32 data, tmp;
|
||||
int ret;
|
||||
|
||||
ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
|
||||
if (ret != PCIBIOS_SUCCESSFUL)
|
||||
return ret;
|
||||
|
||||
data = preprocess_write(data, val, where, size);
|
||||
|
||||
reg = where >> 2;
|
||||
switch (reg) {
|
||||
case (PCI_COMMAND >> 2):
|
||||
fake_cb_bridge_regs.pci_command = (data & 0xffff);
|
||||
break;
|
||||
|
||||
case (PCI_CB_PRIMARY_BUS >> 2):
|
||||
fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
|
||||
fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
|
||||
fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
|
||||
fake_cb_bridge_regs.pci_busn = data & 0xff;
|
||||
if (fake_cb_bridge_regs.cardbus_busn)
|
||||
fake_cb_bridge_regs.bus_assigned = 1;
|
||||
break;
|
||||
|
||||
case (PCI_INTERRUPT_LINE >> 2):
|
||||
tmp = (data >> 16) & 0xffff;
|
||||
/* disable memory prefetch support */
|
||||
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
|
||||
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
|
||||
fake_cb_bridge_regs.bridge_control = tmp;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_BASE_0 >> 2):
|
||||
fake_cb_bridge_regs.mem_base0 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
|
||||
fake_cb_bridge_regs.mem_limit0 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_BASE_1 >> 2):
|
||||
fake_cb_bridge_regs.mem_base1 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
|
||||
fake_cb_bridge_regs.mem_limit1 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_BASE_0 >> 2):
|
||||
fake_cb_bridge_regs.io_base0 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_LIMIT_0 >> 2):
|
||||
fake_cb_bridge_regs.io_limit0 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_BASE_1 >> 2):
|
||||
fake_cb_bridge_regs.io_base1 = data;
|
||||
break;
|
||||
|
||||
case (PCI_CB_IO_LIMIT_1 >> 2):
|
||||
fake_cb_bridge_regs.io_limit1 = data;
|
||||
break;
|
||||
}
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 *val)
|
||||
{
|
||||
/* snoop access to slot 0x1e on root bus, we fake a cardbus
|
||||
* bridge at this location */
|
||||
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
|
||||
fake_cb_bridge_bus_number = bus->number;
|
||||
return fake_cb_bridge_read(where, size, val);
|
||||
}
|
||||
|
||||
/* a configuration cycle for the device behind the cardbus
|
||||
* bridge is actually done as a type 0 cycle on the primary
|
||||
* bus. This means that only one device can be on the cardbus
|
||||
* bus */
|
||||
if (fake_cb_bridge_regs.bus_assigned &&
|
||||
bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||||
PCI_SLOT(devfn) == 0)
|
||||
return bcm63xx_do_cfg_read(0, 0,
|
||||
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
|
||||
where, size, val);
|
||||
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
}
|
||||
|
||||
static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
|
||||
int where, int size, u32 val)
|
||||
{
|
||||
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
|
||||
fake_cb_bridge_bus_number = bus->number;
|
||||
return fake_cb_bridge_write(where, size, val);
|
||||
}
|
||||
|
||||
if (fake_cb_bridge_regs.bus_assigned &&
|
||||
bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||||
PCI_SLOT(devfn) == 0)
|
||||
return bcm63xx_do_cfg_write(0, 0,
|
||||
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
|
||||
where, size, val);
|
||||
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
}
|
||||
|
||||
struct pci_ops bcm63xx_cb_ops = {
|
||||
.read = bcm63xx_cb_read,
|
||||
.write = bcm63xx_cb_write,
|
||||
};
|
||||
|
||||
/*
|
||||
* only one IO window, so it cannot be shared by PCI and cardbus, use
|
||||
* fixup to choose and detect unhandled configuration
|
||||
*/
|
||||
static void bcm63xx_fixup(struct pci_dev *dev)
|
||||
{
|
||||
static int io_window = -1;
|
||||
int i, found, new_io_window;
|
||||
u32 val;
|
||||
|
||||
/* look for any io resource */
|
||||
found = 0;
|
||||
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
||||
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
|
||||
found = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (!found)
|
||||
return;
|
||||
|
||||
/* skip our fake bus with only cardbus bridge on it */
|
||||
if (dev->bus->number == fake_cb_bridge_bus_number)
|
||||
return;
|
||||
|
||||
/* find on which bus the device is */
|
||||
if (fake_cb_bridge_regs.bus_assigned &&
|
||||
dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||||
PCI_SLOT(dev->devfn) == 0)
|
||||
new_io_window = 1;
|
||||
else
|
||||
new_io_window = 0;
|
||||
|
||||
if (new_io_window == io_window)
|
||||
return;
|
||||
|
||||
if (io_window != -1) {
|
||||
printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
|
||||
"need IO, which hardware cannot do\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
|
||||
(new_io_window == 0) ? "PCI" : "cardbus");
|
||||
|
||||
val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
|
||||
if (io_window)
|
||||
val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
|
||||
else
|
||||
val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
|
||||
bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
|
||||
|
||||
io_window = new_io_window;
|
||||
}
|
||||
|
||||
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
|
||||
#endif
|
||||
|
|
|
@ -28,7 +28,11 @@ static struct resource bcm_pci_mem_resource = {
|
|||
static struct resource bcm_pci_io_resource = {
|
||||
.name = "bcm63xx PCI IO space",
|
||||
.start = BCM_PCI_IO_BASE_PA,
|
||||
#ifdef CONFIG_CARDBUS
|
||||
.end = BCM_PCI_IO_HALF_PA,
|
||||
#else
|
||||
.end = BCM_PCI_IO_END_PA,
|
||||
#endif
|
||||
.flags = IORESOURCE_IO
|
||||
};
|
||||
|
||||
|
@ -38,6 +42,33 @@ struct pci_controller bcm63xx_controller = {
|
|||
.mem_resource = &bcm_pci_mem_resource,
|
||||
};
|
||||
|
||||
/*
|
||||
* We handle cardbus via a fake Cardbus bridge, memory and io spaces
|
||||
* have to be clearly separated from PCI one since we have different
|
||||
* memory decoder.
|
||||
*/
|
||||
#ifdef CONFIG_CARDBUS
|
||||
static struct resource bcm_cb_mem_resource = {
|
||||
.name = "bcm63xx Cardbus memory space",
|
||||
.start = BCM_CB_MEM_BASE_PA,
|
||||
.end = BCM_CB_MEM_END_PA,
|
||||
.flags = IORESOURCE_MEM
|
||||
};
|
||||
|
||||
static struct resource bcm_cb_io_resource = {
|
||||
.name = "bcm63xx Cardbus IO space",
|
||||
.start = BCM_PCI_IO_HALF_PA + 1,
|
||||
.end = BCM_PCI_IO_END_PA,
|
||||
.flags = IORESOURCE_IO
|
||||
};
|
||||
|
||||
struct pci_controller bcm63xx_cb_controller = {
|
||||
.pci_ops = &bcm63xx_cb_ops,
|
||||
.io_resource = &bcm_cb_io_resource,
|
||||
.mem_resource = &bcm_cb_mem_resource,
|
||||
};
|
||||
#endif
|
||||
|
||||
static u32 bcm63xx_int_cfg_readl(u32 reg)
|
||||
{
|
||||
u32 tmp;
|
||||
|
@ -98,8 +129,17 @@ static int __init bcm63xx_pci_init(void)
|
|||
val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
|
||||
bcm_pcmcia_writel(val, PCMCIA_C1_REG);
|
||||
|
||||
#ifdef CONFIG_CARDBUS
|
||||
/* setup local bus to PCI access (Cardbus memory) */
|
||||
val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
|
||||
bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
|
||||
bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
|
||||
val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
|
||||
bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
|
||||
#else
|
||||
/* disable second access windows */
|
||||
bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
|
||||
#endif
|
||||
|
||||
/* setup local bus to PCI access (IO memory), we have only 1
|
||||
* IO window for both PCI and cardbus, but it cannot handle
|
||||
|
@ -169,6 +209,10 @@ static int __init bcm63xx_pci_init(void)
|
|||
|
||||
register_pci_controller(&bcm63xx_controller);
|
||||
|
||||
#ifdef CONFIG_CARDBUS
|
||||
register_pci_controller(&bcm63xx_cb_controller);
|
||||
#endif
|
||||
|
||||
/* mark memory space used for IO mapping as reserved */
|
||||
request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
|
||||
"bcm63xx PCI IO space");
|
||||
|
|
Loading…
Reference in a new issue