openwrtv4

Author	SHA1	Message	Date
John Crispin	997ca19fd2	ralink: revert r37163 https://dev.openwrt.org/ticket/17071 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42036	2014-08-07 12:38:20 +00:00
John Crispin	17b8d9c976	ramips: add profile for easyacc wizard8800 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41986	2014-08-03 14:31:18 +00:00
John Crispin	058a5c85ef	firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 41962	2014-08-03 11:13:58 +00:00
John Crispin	04e4ff282a	ramips:support Lenovo AC1200 Wireless router Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> SVN-Revision: 41961	2014-08-03 11:13:52 +00:00
John Crispin	21845cb45d	ramips: Add support for VoCore This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939	2014-08-01 20:51:24 +00:00
John Crispin	7d9bac5247	ramips: Add support for SPI_CS1 pinmux This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41938	2014-08-01 20:51:14 +00:00
John Crispin	9efd7ebd34	ramips: add support for easyacc wizard8800 Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de> SVN-Revision: 41936	2014-08-01 11:19:50 +00:00
John Crispin	c6674722b9	ramips: Fix LEDs on the Kingston MLW221 LED Fix up for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41933	2014-08-01 11:19:39 +00:00
John Crispin	6fb04ff871	ramips: correct typo ubsphy -> usbphy This appears to be a typo. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41859	2014-07-28 15:26:36 +00:00
John Crispin	6f6dc62ca2	ramips: fix mode switch gpio for AsiaRF AWM eval board Fix a typo: gpio 21 is already used for the WPS led. Gpio 20 is the right one (tested) for the mode switch. Confirmed that /sys/kernel/debug/gpio state followed the position of the switch. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41858	2014-07-28 15:26:32 +00:00
John Crispin	636f2b83e6	ramips: add ethernet macaddr to dts for AWM003-EVB Follows the pattern of http://patchwork.openwrt.org/patch/5970/ Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41857	2014-07-28 15:26:23 +00:00
John Crispin	5b4abf87d7	ramips: add support for Kingston MLW221 This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41841	2014-07-26 20:36:22 +00:00
John Crispin	b77e92e020	ramips: ethernet mac cleanup Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839	2014-07-26 20:36:09 +00:00
John Crispin	443aee86bf	ramips: fix vlan configuration for asiarf avm003 The earlier r41797 change was missing this part, to enable the right vlan configuration. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41838	2014-07-26 20:36:01 +00:00
John Crispin	08fb5fb326	ramips: fix sysupgrade for asiarf awm003 Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41837	2014-07-26 20:35:46 +00:00
John Crispin	0b5b8de818	ramips: fix gpio mapping on MZK-750DHP Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41811	2014-07-23 07:49:54 +00:00
John Crispin	e5d4e5dee3	ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 41810	2014-07-23 07:49:50 +00:00
John Crispin	2c356c4bb7	ramips: add a profile for AWM003 same as AWM002 but with 64mb RAM Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41797	2014-07-22 09:58:21 +00:00
John Crispin	ba63338d3f	kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41776	2014-07-20 17:31:11 +00:00
John Crispin	4d22954db0	ramips: fix mac address partitions on ASL-26555 ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on uboot-env corresponds to D-Link. ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41768	2014-07-20 17:30:28 +00:00
John Crispin	f44d3f9980	ramips: soc wmac eeprom cleanup Move eeprom extraction from scripts to dts files. Additionally there are few other changes like: - whitespace fixes - add partition labels where needed - BR6524N board doesn't exist (lost in translation?) - fix Edimax 3g-6200nl model - add wmac eeprom to dts for Asus RT-N14U board Compile tested all subtargets and their profiles. Run tested on: - Asus RT-N15 - Asus RT-N14U - Buffalo WHR-600D - Argus ATP52B - Sparklan WCR-150GN Few problems noted: - many boards didn't have wmac eeprom information defined at all - several boards don't have any patitions defined (see FIXME comments in dts) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41680	2014-07-17 10:55:31 +00:00
John Crispin	74db9511dc	ramips: basic support for Planex MZK-750DHP some gpios are still missing. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41654	2014-07-14 17:10:39 +00:00
John Crispin	e33584f6b8	ramips: squelch mdio debugging info on rt2880 ethernet Use pr_debug rather than pr_info since it is only relevant for debugging. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 41653	2014-07-14 17:05:40 +00:00
John Crispin	76ba6846a2	ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41634	2014-07-14 07:38:32 +00:00
John Crispin	8c577d9fde	ramips: extract mac address from flash on WHR-600D board Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41633	2014-07-14 07:38:28 +00:00
John Crispin	4af1b51ec3	ramips: extract default lan_mac from eth0 The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts. But lan_mac is not set by default, this results in lan and wan having the same mac. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41632	2014-07-14 07:38:23 +00:00
John Crispin	ba3988fb16	ramips: add support for WR8305RT board Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584	2014-07-12 06:54:03 +00:00
John Crispin	03faf4618e	ramips: add support for Zbtlink WA05 router Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41579	2014-07-10 22:02:28 +00:00
John Crispin	6134a3de30	target/linux/*: more dead package cleanups found 2 more Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41574	2014-07-10 20:15:50 +00:00
John Crispin	32e93efc73	target/linux/*: more dead package cleanups Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571	2014-07-10 20:05:43 +00:00
John Crispin	94802dca60	ralink: wpa does not exist, use wpad-mini instead Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41561	2014-07-10 19:16:19 +00:00
John Crispin	bbfb3baaed	ramips: add missing rt3352 usb phy node to dts Signed-off-by: michael <igvtee@gmail.com> SVN-Revision: 41476	2014-07-02 16:37:30 +00:00
John Crispin	62287e589d	ramips: fix target rt5350 only have 28 gpios Signed-off-by: michael <igvtee@gmail.com> SVN-Revision: 41475	2014-07-02 16:37:26 +00:00
John Crispin	80e3282739	ralink: make xhci platform depend on mt7621 this broke CONFIG_ALL builds for mt7620 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41471	2014-07-02 14:32:43 +00:00
John Crispin	3d81a4ef82	ralink: add Wansview NCS601W IP Camera Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41453	2014-07-02 07:42:44 +00:00
John Crispin	c749b310ed	ralink: register wifi firmware for WRTnode After r41444 wifi working on WRTnode. Tested. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41452	2014-07-01 18:17:55 +00:00
John Crispin	9c84f72f85	ramips: set default vid of each vlan, so it won't need be set explicitly. Signed-off-by: Xiongfei Guo <xfguo@credosemi.com> SVN-Revision: 41448	2014-07-01 13:18:27 +00:00
John Crispin	4ddc0f9ff3	ramips: add WHR-1166 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41447	2014-07-01 10:26:42 +00:00
John Crispin	3c88de0d47	ramips: sync the WHR-600D flash layout with that of the vendor FW Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41446	2014-07-01 10:26:38 +00:00
John Crispin	2e8c6e4128	ramips: add wmac to mt7620a device tree Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41445	2014-07-01 10:26:33 +00:00
John Crispin	5f6e7e1f44	ramips: add wmac to mt7620n device tree Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41444	2014-07-01 10:26:30 +00:00
John Crispin	bbd8f9c96a	ramips: enable wmac clock for mt7620 Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41443	2014-07-01 10:26:25 +00:00
John Crispin	22c4f2475b	ralink: refresh kernel patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41353	2014-06-26 13:47:50 +00:00
John Crispin	994e5ce2f9	kernel: update 3.10.36->3.10.44 205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41351	2014-06-26 13:47:42 +00:00
John Crispin	975728813a	ralink: fix up WRTNode vs WRTNODE in the dts file https://dev.openwrt.org/ticket/16899 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41343	2014-06-26 11:43:26 +00:00
John Crispin	021e728962	ralink: Update MT7530 switch driver. - Support set VLAN ID of each vlan. - Support untag feature. - Replace register address with C MACRO. - There are 8 ports for MT7530 actually. Signed-off-by: Xiongfei Guo <xfguo@credosemi.com> SVN-Revision: 41331	2014-06-24 18:14:14 +00:00
John Crispin	9284956ad8	ramips: cleanup some rt305x profiles move both asus boards to asus.mk rename HW5503G profile to HW550-3G to match name in image/Makefile (fixes #16599) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 41271	2014-06-19 14:13:07 +00:00
John Crispin	dc5fe5f73f	ramips: RT-N56U support fixes and factory image creation Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> SVN-Revision: 41224	2014-06-16 18:57:20 +00:00
John Crispin	4d7ed2a8a0	ramips: fixes XDXRN502J reset button Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41217	2014-06-16 18:54:53 +00:00
John Crispin	2fe435081d	ramips: add vlan configuration for asiarf awm002-evb Without this, the ports all end up on vlan 1. This enables a separate WAN port that works. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41216	2014-06-16 18:54:48 +00:00
John Crispin	ab390d6c05	ramips: restore AWM002-EVB profile in asiarf.mk In a recent revision (r41177) John Crispin removed the profile for the AsiaRF AWM002 eval board while adding another AsiaRF board. This patch restores AWM002 and also corrects a misspelling and an apparently errant reference to an Allnet ALL0239-3G device. Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41215	2014-06-16 18:54:42 +00:00
John Crispin	6d213a644d	ramips: add asiarf awapn2403 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41177	2014-06-13 09:16:15 +00:00
Felix Fietkau	231f15c9db	ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145	2014-06-11 17:01:19 +00:00
John Crispin	3306a4f9ab	ralink: fix asiarf/awm002 switch setup Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40939	2014-06-02 12:44:57 +00:00
John Crispin	7437d84814	ralink: add seama image can be upgrade by sysupgrade generate sysupgrade image by combine two images. one is kernel image with seama header. another is root fs image. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40922	2014-06-02 12:43:49 +00:00
John Crispin	f933a741a9	target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915	2014-06-02 12:43:22 +00:00
John Crispin	712dec1027	ramips: add missing profile for DIR-615-D Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40911	2014-06-02 12:43:07 +00:00
John Crispin	9b728bebfb	ramips: fix not set lan/wan mac address The first switch case is default case. Then it will only match default case. cause not update the lan/wan mac address. And in the default switch case the param lan_mac is empty. it will case error message 'arithmetic syntax error' when call macaddr_add function. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40910	2014-06-02 12:43:04 +00:00
John Crispin	813a7c3827	ralink: Add support for samsung cy-swr1100 wireless router It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40908	2014-06-02 12:42:52 +00:00
John Crispin	efd09832fe	ramips: Support for Teltonika RUT5XX Hi Hartmut, Thanks for your feedback, I have reformated the patch accordingly. Added support for Teltonika RUT5XX hardware. Signed-off-by: Steffen Weinreich <steve@weinreich.org> SVN-Revision: 40907	2014-06-02 12:42:48 +00:00
John Crispin	583b908bc7	ralink: Enable Asus RT-N10+ in menuconfig targets This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk). Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org> SVN-Revision: 40903	2014-06-02 12:41:45 +00:00
John Crispin	4a7a0d2536	ralink: add dir-645 to the eeprom hotplug script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40561	2014-04-23 07:52:56 +00:00
John Crispin	720a0a1df1	ramips: register clock device for the WMAC on RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40557	2014-04-23 07:51:57 +00:00
John Crispin	cd5f3584e2	ramips: Add support for the 7Links PX-4885 wireless router. The 7Links PX-4885 is a small battery-powered wireless router. It is based on a RT5350F WiSoC and features one ethernet port and one USB port. It is a Hame MPR-A1 clone, except it has different GPIOs, a different battery and more RAM (32 MB). This patch adds a profile for this board, the corresponding device tree file and the adequate base-files changes (incl. sysupgrade). Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> SVN-Revision: 40554	2014-04-22 08:08:51 +00:00
John Crispin	284ada8a3e	ramips: build factory-compatible image for AR725W Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40552	2014-04-22 08:08:42 +00:00
John Crispin	cb91087991	ramips: add Airlink101 AR725W userland support Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40550	2014-04-22 08:08:35 +00:00
John Crispin	2b2d274bfa	ramips: Add Airlink101 AR725W board support Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40549	2014-04-22 08:08:31 +00:00
John Crispin	010dcd092f	ralink: add port_init for rt2880 Forgotten patch to fix ethernet for rt2880. Based on previously submitted patch from Claudio. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40504	2014-04-13 18:01:08 +00:00
John Crispin	7ae1d573ae	Fix Asus rt-n15 board support * gpio leds and buttons * ethernet Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40494	2014-04-12 21:22:04 +00:00
John Crispin	3d6ba83fe4	rt2880 DT fixes * add pinctrl * fix ethernet port * make wifi available by default Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40493	2014-04-12 21:22:00 +00:00
John Crispin	fa86c30538	Fix pinmux-rt2880 The last arg to FUNC() is count, not last pin. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40492	2014-04-12 21:21:56 +00:00
John Crispin	73160c1ad6	Add wmac clock for rt2880 Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40491	2014-04-12 21:21:53 +00:00
John Crispin	72803e0e27	Don't try to generate whr-g300n image if it's going to be more than 4M Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40489	2014-04-12 21:21:44 +00:00
Gabor Juhos	d2812cb036	kernel: update 3.10 to 3.10.36 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467	2014-04-12 11:59:07 +00:00
John Crispin	f1e31f8266	ralink: fix WHR-300HP2 mtd size Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40419	2014-04-07 15:10:26 +00:00
Felix Fietkau	8f41856f1f	ramips: fix regression from r39949 (#15382 ) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40391	2014-04-06 00:09:50 +00:00
John Crispin	5b6ceab69b	ralink: fix chuncked-io module Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40342	2014-03-30 19:03:55 +00:00
Gabor Juhos	627baa28d3	kernel: update 3.10 to 3.10.34 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40291	2014-03-27 09:28:33 +00:00
John Crispin	4835ea949f	ralink: add missing OF node Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39950	2014-03-18 19:22:13 +00:00
John Crispin	332b94fbd5	ralink: refresh patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39949	2014-03-18 19:21:56 +00:00
John Crispin	375e02ac3d	ralink: add missing clk_set_rate() Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39896	2014-03-12 19:33:01 +00:00
John Crispin	96fa58bafd	ralink: add support for wrtnode Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39786	2014-03-07 09:54:59 +00:00
Gabor Juhos	f677b1bc7e	kernel: update 3.10 to 3.10.32 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39707	2014-02-23 10:59:40 +00:00
John Crispin	b56bef28d7	ralink: add support for na930 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39611	2014-02-18 13:33:25 +00:00
John Crispin	55383946dc	ralink: add gpio_uartf mux group Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39610	2014-02-18 13:33:20 +00:00
John Crispin	363512b8c6	ralink: fix the gpio mode mapping Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39609	2014-02-18 13:33:16 +00:00
Gabor Juhos	a2543d72d8	kernel: update 3.10 to 3.10.28 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39399	2014-01-26 11:30:34 +00:00
John Crispin	ebaa3817a7	ralink: activate xhci config Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39330	2014-01-19 17:27:31 +00:00
John Crispin	a818a3cf8f	ralink: backport various fixes from linux-mti Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39329	2014-01-19 17:27:22 +00:00
John Crispin	a75b692557	ralink: add xhci driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39328	2014-01-19 17:27:13 +00:00
John Crispin	f3a243c3dd	ramips: Add profile for the Edimax BR-6475nD Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39299	2014-01-15 18:29:51 +00:00
John Crispin	beb29461ff	ramips: Add userspace support for the Edimax BR-6475nD The rt2x00 wifi driver may still need updating to function with this device. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39298	2014-01-15 18:29:44 +00:00
John Crispin	62dd252b86	ramips: rt3883: Fix a typo in rt3883.dtsi Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39297	2014-01-15 18:29:03 +00:00
John Crispin	9821ce8ed6	ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39248	2014-01-12 17:26:24 +00:00
John Crispin	03ef20ce6f	ralink: fix eeprom loading Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39245	2014-01-12 14:03:15 +00:00
John Crispin	4282d796ea	ralink: fix WHR-600D and WHR-300HP image generation Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39241	2014-01-12 12:12:58 +00:00
John Crispin	a7f53759f5	ralink: fix WHR-600D pcie support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39240	2014-01-12 12:12:53 +00:00
John Crispin	3a64ddd0a1	ralink: add HLK-RM04 support https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39237	2014-01-12 12:07:40 +00:00
John Crispin	aa2be01076	ralink: switch to askconsole Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39236	2014-01-12 12:07:34 +00:00
John Crispin	665c51935e	ralink: fix uartf memory range size Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39235	2014-01-12 12:07:30 +00:00
John Crispin	6278a892d8	ralink: honour memory@0 node Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39234	2014-01-12 12:07:26 +00:00
John Crispin	0ac291d073	ralink: fix rt5350 ethernet Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39233	2014-01-12 12:07:20 +00:00
Gabor Juhos	0e2586a774	kernel: update 3.10 to 3.10.26 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39220	2014-01-11 16:06:37 +00:00
John Crispin	9715b61b3c	ralink: fix tso regression in the ethernet driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39168	2013-12-27 21:14:49 +00:00
John Crispin	9739a0b41b	ramips: add support for RT-N14U (mt7620n based) board added dts file and userspace scripts modified to support Asus RT-N14U board current support status: usb works ethernet works buttons reset, wps leds asus:blue:[usb\|lan\|wan\|air\|power] i2c not tested uart not tested wifi not yet Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 39163	2013-12-25 17:04:50 +00:00
John Crispin	93d8dc870e	ramips: add gpio pin 72 in mt7620 chips to dtsi files describes register set to control last gpio pin on mt7620 platfrom Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 39162	2013-12-25 17:04:34 +00:00
John Crispin	6218da5a41	ralink: fix dir810 networking Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39093	2013-12-16 10:16:33 +00:00
Hauke Mehrtens	952db22551	kernel: update kernel 3.10 to 3.10.24 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39059	2013-12-15 19:16:30 +00:00
John Crispin	b4b0a55aab	ralink: add mt7621 support there are still various missing pieces for full support. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39040	2013-12-13 10:53:34 +00:00
John Crispin	0ef939c93b	ralink: add TSO Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39019	2013-12-09 17:29:29 +00:00
John Crispin	09a933ed73	ralink: fix typo in gpio irq handling Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39018	2013-12-09 17:29:24 +00:00
John Crispin	a65c9e5b20	ralink: add mt7620a gdma info to dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39017	2013-12-09 17:29:19 +00:00
John Crispin	d203784841	ralink: add asoc modules Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39016	2013-12-09 17:29:14 +00:00
John Crispin	be10895651	ralink: add partially working asoc driver. codec is not fully functional yet Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39015	2013-12-09 17:29:08 +00:00
John Crispin	231eca9375	ralink: add helper that identifies the mt7620 ECO Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39014	2013-12-09 17:29:03 +00:00
John Crispin	833943b410	ralink: add dma engine support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39013	2013-12-09 17:28:43 +00:00
Gabor Juhos	f1ef0b92be	kernel: update 3.10 to 3.10.21 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38972	2013-12-01 09:59:53 +00:00
John Crispin	2370126b9b	ramips: Fix initial network configuration for few boards Argus ATP52B: ethernet didn't work because of unconfigured switch Sparklan WCR150GN: add switch config and make single port to be LAN Dlink DIR-645: seems to be a redundant case Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 38960	2013-11-30 08:36:56 +00:00
John Crispin	f8fe6a090a	ramips: Fix dts typos Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 38959	2013-11-30 08:36:47 +00:00
John Crispin	bb2b428a5c	ralink: dts fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38917	2013-11-26 09:51:57 +00:00
John Crispin	6295f38c8f	ralink: add mac address detection for Asus RT-G32 b1 http://patchwork.openwrt.org/patch/4463/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38910	2013-11-25 14:09:08 +00:00
John Crispin	93e9a71538	base-files: allow users to delect debug level during boot Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38909	2013-11-25 08:34:55 +00:00
John Crispin	8ee2b91ddd	ralink: fix up the mt7530 driver to work properly with gmac2 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38905	2013-11-25 08:34:23 +00:00
John Crispin	d84238ad26	ralink: add LRO support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38904	2013-11-25 08:34:12 +00:00
John Crispin	f732ed4500	ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38903	2013-11-25 08:34:01 +00:00
John Crispin	5b437e204f	ralink: set the mac addr via the dts file Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38902	2013-11-25 08:33:42 +00:00
John Crispin	d175740783	ralink: set wmr-300 mac properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38872	2013-11-19 21:13:24 +00:00
John Crispin	40109bb89b	ralink: add missing CONFIG_ symbol to mt7620n Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38867	2013-11-19 16:33:43 +00:00
John Crispin	82e6242798	ralink: add support for ralink mt7620 nand eval board Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38848	2013-11-18 09:35:41 +00:00
John Crispin	a17e5159ac	ralink: improve mt7620n detection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38847	2013-11-18 09:35:32 +00:00
John Crispin	f307b35c8b	ralink: add mt7620 nand driver This is a minor rework of the SDK driver. This driver needs a full rewrite. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38846	2013-11-18 09:35:23 +00:00
John Crispin	9d4eb0ac91	ralink: make all none 3x5x boards default to a vlan1/2 setup Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38845	2013-11-18 09:35:14 +00:00
John Crispin	3d547b740a	ralink: make usb work on the mt7530 eval kit Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38844	2013-11-18 09:34:46 +00:00
John Crispin	269cbfa06a	ralink: add mt7620n dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38829	2013-11-17 13:22:01 +00:00
John Crispin	5c2e867460	ramips: fix wmr300 network detection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38828	2013-11-17 13:14:46 +00:00
John Crispin	dce9b292bf	ralink: add mt7620n support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38823	2013-11-16 20:28:52 +00:00
Felix Fietkau	9aca892304	ramips: use dd bs=4096k instead of bs=4M to make it more portable Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38806	2013-11-14 19:16:04 +00:00
Felix Fietkau	682e134b02	ramips: select kmod-rt2800-soc by default (if available) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38784	2013-11-13 10:29:10 +00:00
John Crispin	191af20982	ramips: use gpio-button-hotplug in favour of the input variant Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38735	2013-11-11 13:40:20 +00:00
John Crispin	33111eff95	ramips: make the rfkill switch work on fonera20n Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38734	2013-11-11 13:40:17 +00:00
John Crispin	3de4bdc36f	ralink: revert 38348 as it breaks network on the hame-mpr https://dev.openwrt.org/changeset/38348 https://dev.openwrt.org/ticket/14403#comment:1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38669	2013-11-07 12:45:52 +00:00
John Crispin	4bb29e9df6	ralink: fix c&p error in gpio driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38668	2013-11-07 12:45:48 +00:00
Gabor Juhos	35656042f1	kernel: update 3.10 to 3.10.18 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38652	2013-11-05 08:25:45 +00:00
Gabor Juhos	379b509362	ramips: enable building of TEW-692GR images The TEW-692GR images are missing since r36169. Uncomment the board specific macro in image/Makefile, in order to generate those again. Only build tested. No idea if the the image works or not, I have bricked my TEW-692GR a few months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38603	2013-10-30 07:06:24 +00:00
Gabor Juhos	dfd4311355	ramips: fix number of GPIOs for RT3352 The RT3352 SoC only supports 46 GPIO lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38602	2013-10-30 07:06:23 +00:00
Gabor Juhos	9186fb342e	ramips: remove trailing whitespaces from .dts{,i} files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38601	2013-10-30 07:06:22 +00:00
John Crispin	176b41d441	ralink: add package for mt7620 sdhci Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38553	2013-10-28 06:47:56 +00:00
John Crispin	36e029b3eb	ralink: dont include mt7620 sdhci support inside the kernel Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38552	2013-10-28 06:47:48 +00:00
John Crispin	7c7225a19d	ralink: add support for missing mt7620 mux values Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38551	2013-10-28 06:47:39 +00:00
John Crispin	43de7c1cfa	ralink: add support for 2 new mt7620 boards made by buffalo Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38550	2013-10-28 06:47:31 +00:00
John Crispin	849f74f930	ralink: pinctrl fix for non muxed pins Pins with no mux option failed to be recognized as gpios. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38540	2013-10-26 12:24:55 +00:00
Gabor Juhos	b6b06000eb	kernel: update 3.10 to 3.10.17 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506	2013-10-23 12:51:05 +00:00
John Crispin	9a97c56535	ralink: fix default vlan mapping for MT7620a_MT7610e Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38418	2013-10-15 14:56:49 +00:00
Hauke Mehrtens	81e2f00367	kernel: update kernel to 3.10.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38384	2013-10-13 19:28:29 +00:00
John Crispin	b93e5498ae	ralink: fixes mpr a1/a2 network setup Signed-off-by: Suschman <suschman@gmx.net> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38348	2013-10-09 10:08:52 +00:00
John Crispin	e382d2c7e6	ralink: add support for the mt7530 eval board Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38345	2013-10-08 21:10:15 +00:00
John Crispin	697bb191b0	ralink: add missing header file to mt7530 driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38344	2013-10-08 21:10:00 +00:00
John Crispin	c903de043e	ralink: fix asiarf image generation Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38324	2013-10-07 15:02:44 +00:00
John Crispin	ddcb800018	ralink: split mt7530 driver out of the gsw driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38323	2013-10-07 15:02:39 +00:00
John Crispin	c077698e38	ralink: build recovery images for dcs930 ip cam Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38322	2013-10-07 15:02:35 +00:00
John Crispin	420c62205b	ralink: DIR610A1 Fix remaining issues This patch fixes: - Ethernet and Wireless LEDs - Wireless MAC Address - Remove whitespaces from dts file Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 38321	2013-10-07 15:02:31 +00:00
John Crispin	5eacfc1c60	ralink: MT7620 eval board pinmux fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38320	2013-10-07 15:02:27 +00:00
John Crispin	cc58dd26d3	ralink: make cevt systick selectable via kconfig Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38319	2013-10-07 15:02:23 +00:00
John Crispin	baf9d53792	ralink: fix mt7620a pinmux Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38318	2013-10-07 15:02:18 +00:00
John Crispin	65bb48cf23	ralink: dts fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38265	2013-09-30 20:48:39 +00:00
John Crispin	52fe1211b3	ralink: fix DIR-320-B1 board detection https://dev.openwrt.org/ticket/14226 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38264	2013-09-30 20:48:34 +00:00
John Crispin	396cb4f405	ralink: Change size of image for DIR-320 B1 to 8MB http://patchwork.openwrt.org/patch/4102/ Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru> SVN-Revision: 38263	2013-09-30 20:48:27 +00:00
Gabor Juhos	9c8a5ef115	kernel: update 3.10 to 3.10.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38228	2013-09-27 07:19:21 +00:00
Felix Fietkau	a30681dff0	build: unify mips target cflags Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38210	2013-09-26 17:53:14 +00:00
Gabor Juhos	0380904acb	kernel/3.10: refresh all target patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38182	2013-09-25 17:13:24 +00:00
Gabor Juhos	76a1617063	ramips: sync 3.10 configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38181	2013-09-25 16:39:23 +00:00
John Crispin	08abb8822b	ralink: make dcs930 uvc camera work Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38054	2013-09-19 05:57:00 +00:00
John Crispin	c0f6bf05f4	ralink: add support for dalink dcs930l ipcam Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38053	2013-09-19 05:56:46 +00:00
John Crispin	898c164b46	ralink: add back dwc_otg driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38052	2013-09-19 05:56:31 +00:00
John Crispin	5722b32acf	ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350 https://dev.openwrt.org/ticket/14129 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38040	2013-09-18 16:31:37 +00:00
John Crispin	8cd1c99707	ralink: add pinctrl driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38026	2013-09-17 21:45:44 +00:00
John Crispin	66bed0b019	ralink: change subtarget order this will make image builder build rt305x targets per default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38025	2013-09-17 21:45:39 +00:00
Gabor Juhos	a0d6cd4f49	kernel/3.10: add new Kconfig option for firmware partition split Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38002	2013-09-15 17:03:29 +00:00
Gabor Juhos	554772a665	kernel: update 3.10 to 3.10.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38000	2013-09-15 16:00:41 +00:00
Gabor Juhos	d120ec18b2	kernel: update 3.10 to 3.10.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37890	2013-09-02 19:12:54 +00:00
Gabor Juhos	043edd8074	kernel: update 3.10 to 3.10.9 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37832	2013-08-23 17:31:04 +00:00
Gabor Juhos	a76371970e	ramips: remove lantiq specific patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37830	2013-08-23 17:07:28 +00:00
Gabor Juhos	9330662208	ramips: use correct image size parameter for DIR-610 A1 Fixes the following error: bash: line 0: [: ralink_default_fw_size_4M: integer expression expected Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37829	2013-08-23 17:07:27 +00:00
Gabor Juhos	0ebe286761	ramips: use correct parameters in the Seama template Fixes DIR-645 image generation errors: bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected ... bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64") make[4]: *** [install] Error 1 Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37828	2013-08-23 17:07:26 +00:00
Gabor Juhos	3afc3824ca	ramips: update the RT3883 PCI patch Fix the following warning: arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe': arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat] Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37827	2013-08-23 17:07:25 +00:00
John Crispin	dc7164d4ef	ramips: DIR-610-A1 Support http://patchwork.openwrt.org/patch/3933/ Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 37785	2013-08-14 19:35:27 +00:00
John Crispin	97a7daa72f	ramips: fix typo in network uci_defaults script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37784	2013-08-14 19:08:55 +00:00
John Crispin	41f62983d3	ramips: dts file cleanup cleanup some inconsistencies in the dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37783	2013-08-14 19:08:44 +00:00
John Crispin	36e3424fa5	ramips: add support for dir810l and asus rp-n53 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37780	2013-08-14 18:15:35 +00:00
John Crispin	632a3e3a79	ramips: various updates to the mt7620 dtsi file Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37779	2013-08-14 18:15:26 +00:00
John Crispin	9e5b0cc19c	ramips: update v3.10 patches Sync the patches with those sent upstream for v3.12. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37778	2013-08-14 18:15:15 +00:00
Gabor Juhos	9257d556c2	ramips: re-implement PCI mux Parallel flash access on RT3662/RT3883 based devices is broken without that. It was fixed already some time ago, but that change seems lost somewhere. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37708	2013-08-05 12:49:19 +00:00
Gabor Juhos	c80dd34924	ramips: allow to build Seama firmware images with arbitrary size Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37707	2013-08-05 12:35:22 +00:00
John Crispin	169e184521	ramips: add Poray IP2202 support Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37640	2013-08-01 14:31:15 +00:00
John Crispin	ce4228b417	ramips: add Poray X8 support Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37639	2013-08-01 14:31:09 +00:00
John Crispin	54968110f1	ramips: add Poray X5/X6 Support Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37638	2013-08-01 14:31:04 +00:00
John Crispin	0dc3b44b0d	ramips: add Poray M4 4M/8M support Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37637	2013-08-01 14:30:58 +00:00
John Crispin	23d3b705df	ramips: add Poray M3 support Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636	2013-08-01 14:30:53 +00:00
John Crispin	aaedf6c8c6	ramips: add basics for Poray devices This commit adds the basic elements to support Poray brand routers. It contains a tool to do the encryption/obfuscation that is used in Poray routers. Support for Poray devices was worked on by: Felix Kaechele <heffer@fedoraproject.org> Luis Soltero <lsoltero@globalmarinenet.com> Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37635	2013-08-01 14:30:46 +00:00
John Crispin	046b282429	ralink: add mt7620a_mt7610e profile Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37633	2013-08-01 14:30:33 +00:00
Felix Fietkau	28d03a9983	kernel: update remaning platforms accidentally left out of r37617 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37619	2013-07-30 08:00:25 +00:00
John Crispin	c2600d13d1	ramips: fix indenting of spi partitions inside dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37609	2013-07-29 13:10:26 +00:00
Felix Fietkau	73c4d73d6d	build: unify target independent optimization options Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37600	2013-07-29 09:38:29 +00:00
John Crispin	8dd30fa775	ramips: add MPR-A1 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37568	2013-07-27 09:23:52 +00:00
John Crispin	13b7ab81cf	ralink: gpio driver should not set gpio to input when irq is querired Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37567	2013-07-27 09:23:45 +00:00
John Crispin	eb089abd28	ramips: add back dwc_otg driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37566	2013-07-27 09:23:40 +00:00
John Crispin	718b47f0b4	ramips: MPR-A2 should use memory auto detection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37565	2013-07-27 09:23:34 +00:00
John Crispin	115c6f85cf	ramips: enable usb phy support on rt5350 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37564	2013-07-27 09:23:29 +00:00
John Crispin	f4c4ca0b00	ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37563	2013-07-27 09:23:24 +00:00
John Crispin	c4413b6e08	ramips: unbreak asiarf dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37561	2013-07-26 15:19:19 +00:00
Gabor Juhos	e9688455f6	kernel: update 3.10 to 3.10.3 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37546	2013-07-26 07:19:58 +00:00
John Crispin	04aaf7a03e	ramips: disable hg255d Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37532	2013-07-25 17:03:08 +00:00
John Crispin	7feebeb193	ramipe: disable HG255D support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37531	2013-07-25 16:55:48 +00:00
John Crispin	9b2c7be0c4	ramips: important patch for HG255D r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!! This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37530	2013-07-25 16:01:58 +00:00
John Crispin	3ad136d9e3	ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> SVN-Revision: 37521	2013-07-24 08:54:41 +00:00
John Crispin	3f3cac6136	ramips: fix HG255D VLAN initial detect issue Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37517	2013-07-23 13:07:00 +00:00
John Crispin	0cc1e2acb4	ramips: Add support for Huawei HG255D in trunk HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them. This patch is tested to work except trivial LED issues. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37505	2013-07-22 15:36:39 +00:00
Gabor Juhos	ef944dcb85	kernel: update 3.10 to 3.10.2 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37502	2013-07-22 15:31:13 +00:00
John Crispin	8d0cd50f30	ralink: set remove dwc_otg from default packages and use dwc2 instead Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37499	2013-07-22 13:52:52 +00:00
John Crispin	ffe389c4c5	ralink: remove dwc_otg from modules.mk Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37498	2013-07-22 13:52:44 +00:00
John Crispin	5525b2136e	ralink: set v3.10 as default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37497	2013-07-22 13:52:32 +00:00
Jonas Gorski	b1b4e7db13	kernel: move CONFIG_NET_IP_TUNNEL to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37465	2013-07-19 22:58:01 +00:00
John Crispin	8028fb8096	ramips: add sysupgarde support for wl-330n3g https://dev.openwrt.org/ticket/13891 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37376	2013-07-17 09:44:57 +00:00
John Crispin	dd22304691	ramips: make the old dwc driver depend on v3.9 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37357	2013-07-15 21:06:03 +00:00
John Crispin	072e1a254c	ramips: add v3.10 kernel config files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37356	2013-07-15 21:05:58 +00:00
John Crispin	cb6375c20a	ramips: fix ehci/ohci OF binding Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37354	2013-07-15 21:05:47 +00:00
John Crispin	12a099eb07	ramips: update dtsi files to work with dwc2 driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37353	2013-07-15 21:05:42 +00:00
John Crispin	e8ebcffd02	ramips: add a explicit reset to dwc2 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37352	2013-07-15 21:05:36 +00:00
John Crispin	bd78f2b56e	ramips: add a patch to make dwc2 work with boards that have an old bootloader Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37339	2013-07-15 11:34:13 +00:00
John Crispin	a0de18807b	ramips: add ralink v3.10 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37331	2013-07-15 10:06:55 +00:00
John Crispin	f7cf157712	ramips: disable ill_acc driver by default The driver seems to be causoing boot rpoblems on some SoCs Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37314	2013-07-14 18:01:00 +00:00
John Crispin	89c0392736	ralink: drop v3.8 support Signed-off-by: John Crispin <blogic@opewnrt.org> SVN-Revision: 37311	2013-07-14 18:00:34 +00:00
Hauke Mehrtens	e574f75d16	kernel: update to kernel 3.9.10 and refresh patches SVN-Revision: 37274	2013-07-13 22:43:10 +00:00
John Crispin	099188695a	ralink: vlan offloading is causing problems. disable it Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37203	2013-07-08 16:34:52 +00:00
John Crispin	a6091a5c71	ralink: unbreak ralink i2c support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37202	2013-07-08 09:01:57 +00:00
John Crispin	a154693bab	ralink: add i2c-ralink kmod info Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37200	2013-07-08 09:01:47 +00:00
John Crispin	2da37a713e	ramips: fix RT-N13U gpio buttons https://dev.openwrt.org/ticket/13795 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37163	2013-07-04 13:31:23 +00:00
Felix Fietkau	5986a18c16	ramips: update wlan firmware hotplug script for new eeprom size Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37112	2013-06-30 21:03:48 +00:00
Jonas Gorski	0d9f760f27	kernel: update linux 3.9 to 3.9.8 Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103	2013-06-30 13:10:12 +00:00
John Crispin	6875316646	ramips: unbreak initramfs generation Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37080	2013-06-29 08:41:03 +00:00
John Crispin	77b9fd52a6	ramips: fix ethernet driver make sure the driver does not crash under load Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37058	2013-06-28 11:22:11 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
John Crispin	36209234ab	ramips: fix rt2x00 ethernet compile bug Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37043	2013-06-27 16:45:40 +00:00
John Crispin	0d4e00c337	ramips: add missing symbols to rt288x config Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37042	2013-06-27 16:45:26 +00:00
John Crispin	1706c8d29a	ramips: fix ethernet stability issue introduced by recent kernel upgrade Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37041	2013-06-27 16:28:06 +00:00
John Crispin	5063f712a6	ramips: move ESW reset to preinit on RT305x/RT5350 RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet interface, otherwise the driver will panic. As we already init the ethernet in preinit we therefor need to reset the switch before that. Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 37027	2013-06-24 12:39:28 +00:00
John Crispin	d3723f93c6	ramips: make rt3883 usb work properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37024	2013-06-24 12:06:56 +00:00
John Crispin	dca18caa79	ramips: revert gpio regulator dts update Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37021	2013-06-24 11:09:50 +00:00
John Crispin	55fb6f3a05	ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016	2013-06-23 15:50:49 +00:00
John Crispin	67f5f188b1	base-files: input/button drivers get loaded before preinit by procd Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000	2013-06-21 16:53:47 +00:00
John Crispin	e6ef318802	base-files: diag does not need to insmod any drivers, procd already did it for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999	2013-06-21 16:53:43 +00:00
John Crispin	fc9532aeaa	ramips: add HAME MPR-A2 support This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898	2013-06-10 08:24:56 +00:00
John Crispin	30786d2dd0	ramips: add support for belkin F7C027 wemo/homeautomatisation plug Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 36897	2013-06-10 08:24:50 +00:00
John Crispin	1756047518	ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775	2013-05-30 15:59:56 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
John Crispin	036fb79052	ramips: drop 3.7 support Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572	2013-05-07 10:58:44 +00:00
John Crispin	16a17b318a	ramips: properly setup the FEATURES variable Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571	2013-05-07 10:58:30 +00:00
John Crispin	bd6e12d904	ramips: fix memory detection rt5350 Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568	2013-05-06 18:23:56 +00:00
John Crispin	899120ddef	ramips: enable dsp extensions for rt305x and rt3883 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567	2013-05-06 16:45:59 +00:00
John Crispin	849ff98669	ramips: fix fypo in ethernet driver rt288x, rt3883 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565	2013-05-06 16:45:43 +00:00
John Crispin	eddd7f5773	ramips: Update ARC Freestation profile These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564	2013-05-06 16:45:35 +00:00
John Crispin	4f1ff28f08	ramips: Support setting active_low in devicetree gpio-export Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563	2013-05-06 16:45:27 +00:00
John Crispin	6af3b6721b	ralink: unbreak uart pinmux handling Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562	2013-05-06 16:45:20 +00:00
John Crispin	7c04b3bd66	ramips: fix gpio base numbering make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561	2013-05-06 16:45:12 +00:00
John Crispin	338ff04cab	ramips: add gpio base properties to dtsi files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560	2013-05-06 16:45:04 +00:00
John Crispin	65760ede8b	ramips: unbreak rt2880 support Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559	2013-05-06 16:44:56 +00:00
John Crispin	28bdb9efe9	ramips: fix DIR-602D1 flash size Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558	2013-05-06 16:44:47 +00:00
John Crispin	1c89a60431	ramips: unbreak gpio handling for uart mux group this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543	2013-05-04 11:36:51 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide\|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	348640f4b3	ramips: rt3883: sync 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36217	2013-04-06 12:37:31 +00:00
John Crispin	d16de0b69f	fix typo pinmmux -> pinmux Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36216	2013-04-06 11:46:34 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
John Crispin	df7af06f1f	fix dir-615 h1 network config http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> SVN-Revision: 36213	2013-04-05 23:37:45 +00:00
John Crispin	e1a74d8ff7	fix typo that made gpiomuxing fail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36212	2013-04-05 23:10:42 +00:00
John Crispin	93899a1329	add profile for tenda w150m board http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176	2013-04-03 10:00:21 +00:00
John Crispin	7e54357bd5	fix ALL5002 default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36175	2013-04-03 10:00:16 +00:00
John Crispin	37401dca92	Build WW factory image for DAP-1350 http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174	2013-04-03 10:00:12 +00:00
John Crispin	910b705155	add Huawei D105 http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173	2013-04-03 10:00:08 +00:00
John Crispin	c1710901c5	add profile for the Edimax 3g-6200NL board http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172	2013-04-03 10:00:03 +00:00
John Crispin	f3643374c4	there is no ttyS1 console Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36171	2013-04-03 09:59:59 +00:00
John Crispin	99e0ff1123	make v3.8 the default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36170	2013-04-03 09:59:55 +00:00
John Crispin	c8d5f5e0ef	add new image/Makefile Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169	2013-04-03 09:59:51 +00:00
John Crispin	770b28f146	add the dts files that describe the boards in future Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36168	2013-04-03 09:59:46 +00:00
John Crispin	2328e8389e	fix upvel profile names Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36167	2013-04-03 09:59:41 +00:00
John Crispin	94972a5268	fix rt3883 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36166	2013-04-03 09:59:37 +00:00
John Crispin	0716ae8abe	fix rt305x config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36165	2013-04-03 09:59:33 +00:00
John Crispin	dce4945972	mark rt288x broken until the test hardware arrives in the mail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36164	2013-04-03 09:59:16 +00:00
John Crispin	46f141637c	add patches for v3.8 Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36163	2013-04-03 09:59:10 +00:00
John Crispin	4f86ea43ca	remove old ralink 3.8 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36162	2013-04-03 09:58:48 +00:00
John Crispin	d4db00205d	move files to files-3.7 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161	2013-04-03 09:58:44 +00:00
John Crispin	86a691144b	add feature gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36160	2013-04-03 09:58:37 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
John Crispin	b22cbac68f	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35988	2013-03-12 13:52:40 +00:00
Gabor Juhos	fe3df4b593	ramips: add profile and build image for the Upvel UR-326N4G board Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972	2013-03-11 21:02:45 +00:00
Gabor Juhos	d543f4b771	ramips: add user-space support for the Upvel UR-326N4G board [juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35971	2013-03-11 21:02:43 +00:00
Gabor Juhos	3c2ef04a0e	ramips: add kernel support for the Upvel UR-326N4G board [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970	2013-03-11 21:02:40 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Gabor Juhos	8798c73860	ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension All known rt305x and rt3883 implementations support at least the 24kec instruction set which includes the DSP extension. For rt288x, the previous value mips32r2 is kept. The cpu target is now set per sub-archtecture, according to cpu-feature-overrides.h of each SoC family. [juhosg: define ARCH_PACKAGES variable for rt305x/rt3883 in order to differentiate the packages compiled with the 24Kec option.] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35853	2013-03-03 12:47:31 +00:00
Gabor Juhos	59ad675ef1	ramips: add user-space detection for ALL5002/ALL5003 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35852	2013-03-03 12:47:28 +00:00
Gabor Juhos	50e51e5ecc	ramips: indicate support for ALL5003 add ALL5003 to board description in mach-all5002.c adapt detection in user-space accordingly (no functional changes) Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35851	2013-03-03 12:47:25 +00:00
Gabor Juhos	367ab0a40f	ramips: enhance user-space board detection Similar to ar71xx, detect only once and cache the strings in /tmp/sysinfo/model and /tmp/sysinfo/boardname. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35850	2013-03-03 12:47:02 +00:00
Gabor Juhos	1ba2272ca5	ramips: fix whitespace in /lib/ramips.sh Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35849	2013-03-03 12:46:08 +00:00
Gabor Juhos	5412b6f32e	ramips: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35801	2013-02-25 21:28:42 +00:00
Gabor Juhos	a08646642e	ramips: image: don't break make process if mkimage command fails Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35800	2013-02-25 21:28:40 +00:00
Gabor Juhos	275db5b4c4	ramips: remove port_power_off field from ehci_platform_data It is removed in 3.8. Also add a revert patch for 3.7. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35799	2013-02-25 21:28:38 +00:00
Gabor Juhos	5e1d6ce077	ramips: remove __dev_{init,exit} annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35798	2013-02-25 21:28:34 +00:00
Jonas Gorski	1cd62d06ca	ramips: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721	2013-02-21 11:45:33 +00:00
Gabor Juhos	90011a99f3	ramips: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652	2013-02-18 09:56:29 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Gabor Juhos	4375dae6d3	ramips: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35628	2013-02-16 17:26:52 +00:00
Gabor Juhos	7fd8525853	ramips: use the new macaddr_* helpers instead of maccalc Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35615	2013-02-16 11:50:25 +00:00
Gabor Juhos	753d713e92	ramips: use the mtd_get_mac_* helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35613	2013-02-16 11:50:21 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	562ba537fc	kernel: update linux 3.7 to 3.7.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35390	2013-01-29 18:29:45 +00:00
John Crispin	756a7c5451	fix for non-blinking LAN LEDs https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359	2013-01-28 18:06:31 +00:00
John Crispin	d93706154b	ramips: reset switch on single-port devices Signed-off-by: Daniel Gole <dgolle@allnet.de> SVN-Revision: 35356	2013-01-28 17:44:41 +00:00
Gabor Juhos	15be1c9ee7	kernel: update linux 3.7 to 3.7.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35318	2013-01-24 17:08:37 +00:00
Gabor Juhos	ed6d399f8d	ramips: add profile and build image for the Tenda 3G300M Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246	2013-01-19 17:05:07 +00:00
Gabor Juhos	9891603eb5	ramips: add user-space support for the Tenda 3G300M Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35245	2013-01-19 17:05:06 +00:00
Gabor Juhos	7eff5d2df0	ramips: add kernel support for the Tenda 3G300M Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244	2013-01-19 17:05:03 +00:00
Gabor Juhos	f7a943694f	ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243	2013-01-19 15:36:13 +00:00
Gabor Juhos	6aebe6a65d	ramips: allow to override image name/suffix in GENERIC_{4,8}M macros Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242	2013-01-19 15:36:11 +00:00
Gabor Juhos	60dde219d4	ramips: do not stop the build if some targets fail This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238	2013-01-19 08:51:45 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Gabor Juhos	0de21d9747	kernel: update linux 3.7 to 3.7.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35216	2013-01-18 11:44:42 +00:00
Felix Fietkau	576aa2af0c	ramips: enable BR6425N in kernel config Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35191	2013-01-17 09:39:44 +00:00
Gabor Juhos	ff2ce330a5	ramips: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35110	2013-01-12 12:25:30 +00:00
Gabor Juhos	d53f8c3ded	ramips: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35109	2013-01-12 12:25:28 +00:00
John Crispin	f2f9332350	adds support for Edimax BR-6524N fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020	2013-01-06 11:11:42 +00:00
John Crispin	569bbe4970	rt5350 switch support fix RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969	2013-01-02 11:28:21 +00:00
Gabor Juhos	fb07876f25	ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934	2012-12-30 08:23:48 +00:00
Gabor Juhos	6708d68c24	ramips: build firmware image for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927	2012-12-29 17:50:40 +00:00
Gabor Juhos	8b1ac2ae37	ramips: add user-space support for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34926	2012-12-29 17:50:38 +00:00
Gabor Juhos	d6d06aceb0	ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925	2012-12-29 17:50:35 +00:00
Gabor Juhos	76537041eb	ramips: build image for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34924	2012-12-29 17:50:34 +00:00
Gabor Juhos	3aad9b4c9b	ramips: add user-space support for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34923	2012-12-29 17:50:32 +00:00
Gabor Juhos	3fcb8bb0dd	ramips: rt305x: add kernel support for AirLive AIR3GII AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922	2012-12-29 17:50:28 +00:00
Felix Fietkau	41a039f464	mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration SVN-Revision: 34909	2012-12-28 19:17:19 +00:00
Gabor Juhos	69da894432	ramips: fix ASUS WL-330N3G MAC address The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34877	2012-12-24 06:52:41 +00:00
Gabor Juhos	c5a36f13f0	ramips: fix wifi EEPROM extraction on DIR-615-Dx models Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34876	2012-12-24 06:52:38 +00:00
Gabor Juhos	8105c6badd	ramips: unify eeprom file name for the built-in wireless MAC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34860	2012-12-22 16:09:03 +00:00
Gabor Juhos	c81b4475c9	ramips: rt3883: fix build error The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34859	2012-12-22 13:50:47 +00:00
Gabor Juhos	b44cdcde8e	ramips: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34845	2012-12-22 12:11:13 +00:00
Gabor Juhos	b81667cb23	ramips: convert to use {e,o}hci-platform driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34843	2012-12-22 12:11:08 +00:00
Gabor Juhos	e1b5eeeaa4	ramips: Add USB support for DAP-1350 platform. It seems to work as intended, but only lightly tested. Patch-by: Bryan Steele <brynet@gmail.com> SIgned-off-by: Gabor Juhos <juhsog@openwrt.org> SVN-Revision: 34811	2012-12-20 19:17:17 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	fe8efb72ca	ramips: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34744	2012-12-17 22:28:11 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
John Crispin	c2ae0ec02a	add support for Hauppauge Broadway This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595	2012-12-10 14:13:01 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Gabor Juhos	e0e43655ce	ramips: fix serial console for Belkin F5D8235 v1/v2 Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445	2012-12-02 14:16:12 +00:00
Gabor Juhos	44131bd785	ramips: rt305x: add profile and build image for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407	2012-11-29 17:37:14 +00:00
Gabor Juhos	d3994b7408	ramips: rt305x: add user-space support for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34406	2012-11-29 17:37:13 +00:00
Gabor Juhos	0ec59e6235	ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34405	2012-11-29 17:37:11 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Gabor Juhos	57b7879a4e	ramips: ramips_eth: use Kconfig definition to enable debug The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34332	2012-11-25 14:25:54 +00:00
Gabor Juhos	21d5df8700	ramips: add DIR-615 D userspace support Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34331	2012-11-25 14:25:27 +00:00
Gabor Juhos	dd092fd10c	ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270	2012-11-20 07:19:10 +00:00
Gabor Juhos	ff1e854511	kernel: update linux 3.6 to 3.6.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34227	2012-11-18 08:41:31 +00:00
John Crispin	dd8c625424	previous commit pushed 1 file too many ;) SVN-Revision: 34179	2012-11-12 21:36:23 +00:00
John Crispin	ced0cf3a94	move ethernet hw init to init/uninit functions This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177	2012-11-12 21:35:01 +00:00
John Crispin	6090ddc896	adds fon20n profile SVN-Revision: 34112	2012-11-07 20:26:31 +00:00
John Crispin	3991526989	ramips: use kernel 3.6.6 ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \| \|.-----.-----.-----.\| \| \| \|.----.\| \|_ \| - \|\| _ \| -__\| \|\| \| \| \|\| _\|\| _\| \|_______\|\| __\|_____\|__\|__\|\|________\|\|__\| \|____\| \|__\| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# SVN-Revision: 34111	2012-11-07 20:26:21 +00:00
John Crispin	480892226d	ramips: add HAVE_CLK to Kconfig on all ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110	2012-11-07 20:26:04 +00:00
John Crispin	feb31be6af	ramips: add linux-3.6 configuration for ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 SVN-Revision: 34109	2012-11-07 20:25:55 +00:00
John Crispin	ca1fcaed5b	ramips: port patches to linux-3.6 Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch SVN-Revision: 34108	2012-11-07 20:25:34 +00:00
Gabor Juhos	a0dd47bbed	ramips: enable USB power on the DIR-645 Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082	2012-11-05 11:04:45 +00:00
Gabor Juhos	829aaedcbf	ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34078	2012-11-05 06:58:53 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Gabor Juhos	db5eea6acd	ramips: use correct key code for the RFKILL switch on the TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943	2012-10-26 18:53:44 +00:00
Gabor Juhos	b530d9d2b3	ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864	2012-10-19 17:42:22 +00:00
Gabor Juhos	6ca2970e4b	ramips: add profile and build image for the TEW-691GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852	2012-10-18 07:23:13 +00:00
Gabor Juhos	21180e29f7	ramips: add user-space support for TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851	2012-10-18 07:23:12 +00:00
Gabor Juhos	25d53c4c28	ramips: rt3883: add initial support for the TRENDnet TEW-691GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850	2012-10-18 07:23:11 +00:00
Gabor Juhos	462a53c367	ramips: add profile and build image for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849	2012-10-18 07:23:10 +00:00
Gabor Juhos	d3c368c324	ramips: add user-space support for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847	2012-10-18 07:23:07 +00:00
Gabor Juhos	7f8b7207c9	ramips: rt3883: add initial support for TRENDnet TEW-692GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846	2012-10-18 07:23:06 +00:00
Gabor Juhos	bf9ae9432b	ramips: add profile and build image for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845	2012-10-18 07:23:04 +00:00
Gabor Juhos	06edafd079	ramips: add user space support for the DIR-645 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844	2012-10-18 07:23:03 +00:00
Gabor Juhos	d1a253a2fd	ramips: rt3883: add inital support for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843	2012-10-18 07:23:02 +00:00
Gabor Juhos	e962c16a88	ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842	2012-10-18 07:23:00 +00:00

... 7 8 9 10 11 ...

1376 commits