Commit graph

1215 commits

Author SHA1 Message Date
Rafał Miłecki
23da3fbf68 firmware-utils: mktplinkfw2: fix MD5 salt
LEDE supports few devices using TP-Link firmware format (V2 or V3):
ArcherC20i, ArcherC50, ArcherMR200, TDW8970, TDW8980, TL-WR840N v4,
TL-WR841N v13 and VR200v

Testing mktplinkfw2 tool with official (vendor generated) firmware files
for above devices has shown an error when comparing calculated and
included MD5 sum, e.g.:
> mktplinkfw2 -i Archer_C20iv1_0.9.1_3.2_up_boot\(170221\)_2017-02-21_17.14.03.bin | grep -A 1 MD5Sum1
Header MD5Sum1         : 22 5a cb 92 10 d2 95 7b df 62 9a f8 62 17 37 10 (*ERROR*)
          --> expected : ad 19 11 d1 78 98 a7 42 5f 2e 64 da 8a 34 ec cb

This problem has been verified to occur with:
Archer_C20iv1_0.9.1_3.2_up_boot(170221)_2017-02-21_17.14.03.bin
Archer MR200v1_0.9.1_1.1_up_boot_v004a.0 Build 160905 Rel.60037n.bin
TD-W8970v3_0.9.1_2.0_up_boot(160816)_2016-08-16_10.40.57.bin
TD-W8980v1_0.6.0_1.8_up_boot(150514)_2015-05-14_11.16.43.bin
Archer_VR200vv2_0.2.0_0.8.0_up_boot(161202)_2016-12-05_14.39.06.bin

For some images, e.g.:
Archer_C50v3_EU_0.9.1_0.3_up_boot[170417-rel52298].bin
TL-WR840Nv4_EU_0.9.1_4.16_up_boot[170421-rel70692].bin
TL-WR841Nv13_0.9.1_3.16_up_boot(161012).bin
mktplinkfw2 calculates zero MD5 so these has to be fixed separately:
> mktplinkfw2 -i TL-WR841Nv13_0.9.1_3.16_up_boot\(161012\).bin | grep -A 1 MD5Sum1
Header MD5Sum1         : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (*ERROR*)
          --> expected : 6f 1d 9b 57 5d 42 14 6d bf a2 03 9d 46 7d 55 55

It's most likely that MD5 salt used in mktplinkfw2 has been always wrong
(and it's not a matter of e.g. a vendor change). Update it to fix MD5
calculation.

This has been also verified to calculate MD5 correctly for other (not
yet supported) devices, e.g.:
Archer_C3150v2_0.1.0_0.9.1_up_boot(160812)_2016-08-12_10.52.54.bin
Archer_C3200v1_0.9.1_0.1_up_boot(160704)_2016-07-04_15.48.28.bin

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Mathias Kresin <dev@kresin.me>
2017-07-03 07:04:58 +02:00
Rafał Miłecki
896246b8c5 firmware-utils: mktplinkfw2: fix support for -w option
This fixes copy & paste typo when reading -w argument.

Fixes: 4b35e174ca ("firmware-utils: mktplinkfw2: support additional hardware version")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-07-02 22:31:13 +02:00
Piotr Dymacz
24043a0d2e ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13
TP-Link TL-WR840N v4 and TL-WR841N v13 are simple N300 routers with
5-port FE switch and non-detachable antennas. Both are very similar
and are based on MediaTek MT7628NN (aka MT7628N) WiSoC.

The difference between these two models is in number of available
LEDs, buttons and power input switch.

This work is partially based on GitHub PR#974.

Specification:

- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- TL-WR840N v4: 5x LED (GPIO-controlled), 1x button
- TL-WR841N v13: 8x LED (GPIO-controlled*), 2x button, power input
  switch

* WAN LED in TL-WR841N v13 is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.

Factory image notes:

These devices use version 3 of TP-Link header, fortunately without RSA
signature (at least in case of devices sold in Europe). The difference
lays in the requirement for a non-zero value in "Additional Hardware
Version" field. Ideally, it should match the value stored in vendor
firmware header on device ("0x4"/"0x13" for these devices) but it seems
that anything other than "0" is correct.

We are able to prepare factory firwmare file which is accepted and
(almost) correctly flashed from the vendor GUI. As it turned out, it
accepts files without U-Boot image with second header at the beginning
but due to some kind of bug in upgrade routine, flashed image gets
corrupted before it's written to flash.

Tests showed that the GUI upgrade routine copies value of "Additional
Hardware Version" from existing firmware into offset "0x2023c" in
provided file, _before_ storing it in flash. In case of vendor firmware
upgrade files (which all include U-Boot image and two headers), this
offset points to the matching field in kernel+rootfs firmware part
header. Unfortunately, in case of LEDE factory image file which contains
only one header, it points to the offset "0x2023c" in kernel image. This
leads to a corrupted kernel and ends up with a "soft-bricked" device.

The good news is that U-Boot in these devices contains well known tftp
recovery mode, which can be triggered with "reset" button. What's more,
in comparison to some of older MediaTek based TP-Link devices, this
recovery mode doesn't write whole file at offset "0x0" in flash, without
verifying provided file in advance. In case of recovery mode in these
devices, first "0x20000" bytes are always skipped and "0x7a0000" bytes
from rest of the file are stored in flash at offset "0x20000".

Flash instruction:

Until (if at all) TP-Link fixes described problem, the only way to flash
LEDE image in these devices is to use tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "lede-ramips-mt7628-tl-wr84...-squashfs-tftp-recovery.bin"
   to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
   the router and keep button pressed for around 6-7 seconds, until
   device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.

To access U-Boot CLI, keep pressed "4" key during boot.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-29 10:37:36 +02:00
Piotr Dymacz
4b35e174ca firmware-utils: mktplinkfw2: support additional hardware version
As it turned out, some of new MediaTek based TP-Link devices use value
from field at 0x3c offset in version 3 of TP-Link header to specify
"Additional Hardware Version".

Value from this field is validated during regular (GUI) firmware upgrade
on devices like TL-WR840N v4 or TL-WR841N v13. If it's zero (based on
some tests, it seems that firmware will accept anything != 0), errors
like below are printed on console and upgrade fails:

[ rsl_sys_updateFirmware ] 2137:  Firmware Additional HardwareVersion
check failed

[ rdp_updateFirmware ] 345:  perror:4506

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-29 10:37:36 +02:00
Henryk Heisig
b05c7193fd ar71xx: add support for TP-Link Archer C58 v1
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)

QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.

Flash instruction:

Use "factory" image directly in vendor GUI.

Recovery method:

1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
   rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
   directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server.
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset

This commit is based on GitHub PR#1112

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-06-29 10:37:36 +02:00
Jean-Pierre St-Yves
01280bc8dc firmware-utils: tplink-safeloader: add support for Archer C5 v2 JP/US
Add support for Japan and US versions of TP-Link Archer C5 v2

Signed-off-by: Jean-Pierre St-Yves <jpstyves@gmail.com>
2017-06-29 10:37:36 +02:00
Henryk Heisig
7d21b4eed0 firmware-utils: tplink-safeloader: add support for Archer C59/C60 RU
Add support for Russian version of TP-Link Archer C59/C60 v1

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-06-29 10:37:36 +02:00
Federico Cappon
9fec39a033 ar71xx: add support for TP-Link TL-WA855RE v1
TP-Link TL-WA855RE v1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/397/198 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 2x LED (green and orange in the same package), 2x button
- UART: TP5(TX) and TP4(RX) test points on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.

Signed-off-by: Federico Cappon <dududede371@gmail.com>
2017-06-29 10:37:36 +02:00
Mathias Kresin
06741411e0 firmware-utils: fix dgn3500sum compiler warnings
The sum variable need to be initialised, otherwise it will points to
random stack memory and a bogus image checksum might be calculated.

While at it, fix the segfault in case the product region code isn't
specified and enable compiler warnings which had revealed all the code
issues.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-26 20:08:36 +02:00
Alexander Couzens
b5aaafe9a3
mtd-utils/mkfs.jffs2: honor env SOURCE_DATE_EPOCH
Use the timestamp from the enviroment SOURCE_DATE_EPOCH
if set instead of the build time.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-06-19 14:35:07 +02:00
Alexander Couzens
c47a1a3527 firmware-utils: honor env SOURCE_DATE_EPOCH
Use the timestamp from the enviroment SOURCE_DATE_EPOCH
if set instead of the build time.
Fixes reproducible builds for certain firmware images.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-06-19 14:34:52 +02:00
Ludwig Thomeczek
9cd69c45c5 firmware-utils: tplink-safeloader: add TP-Link Archer C25 v1
This adds the necessary firmware layout definitions for the Archer C25.
It has an addtional partition containing some static data ("extra-para")
without which no factory flash is possible, therefore put_data() has been
added.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
2017-06-11 21:32:18 +02:00
Serg Studzinskii
b7cc661615 ar71xx: add support for TP-Link TL-WR942N v1
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on
Qualcomm/Atheros QCA9561.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x USB 2.0
- 11x LED (most are controlled by 74HC595)
- 2x button
- UART header on PCB*

* Serial console is disabled in OEM non-beta firmwares and corresponding
  GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by
  production (non-beta) U-Boot and firmware.

Currently not working:

1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs
   by some U-Boot versions.

Flash instruction under vendor GUI:

1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin".
2. Go to WEB interface and perform usual firmware upgrade.

FLash instruction under U-Boot recovery mode (doesn't work in beta
firmware):

1. Setup PC with static IP "192.168.0.66/24" and tftp server.
2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make
   it available to download from your tftp server.
3. Press "reset" button and power up the router, wait till "WPS" LED
   turns on.

Flash instruction under U-Boot, using UART (can be done only with
preinstalled UART-enabled U-Boot version!):

1. Use "tpl" to stop autobooting and obtain U-Boot CLI access.
2. Setup ip addresses for U-Boot and your tftp server.
3. Issue below commands:
   tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin
   erase 0x9f020000 +$filesize
   cp.b 0x81000000 0x9f020000 $filesize
   reset

Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
[minor code style fixes, extended commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-11 21:32:17 +02:00
Jan Niehusmann
c4022243d8 firmware-utils: tplink-safeloader: support strings as soft_version
Some TP-Link routers (C25, C59, C60) contain a version string instead
of a binary structure in the soft_version partition.

Flashing LEDE from the original firmware's GUI, this version string
taken from the soft_ver partition of the firmware image is written to
the router's config partition.

When using tftp recovery to go back to the original Archer C25 firmware,
a version check compares that version to the version of the firmware to
be flashed.

Without proper contents in the config partition, reverting to the
original firmware fails.

Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver
partition.

Signed-off-by: Jan Niehusmann <jan@gondor.com>
2017-06-11 19:06:49 +02:00
Daniel Golle
92c80f38cf automake: import upstream fix for perl 5.26
Build broke as distributions now include Perl 5.26 and automake
triggered an "Unescaped left brace in regex" error.
Import upstream commit 13f00eb449 to fix that.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-06-07 19:47:34 +02:00
Felix Fietkau
e25cedd0b5 tar: override symlink permissions
On Linux, symlink permissions cannot be altered and are always 0777.
On Mac OS X they can be 0755. Force 0777 here to keep tarballs
reproducible across systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-30 15:40:51 +02:00
Daniel Engberg
9235a29e1a tools/sparse: Update to snapshot 2017-03-31
Update sparse to snapshot 2017-03-31
Switch to HTTPS

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-05-29 10:00:43 +02:00
Eric Luehrsen
aeeb2faf88 flex: update to 2.6.4 (FS#809)
flex 2.6.3 has a bug which fails code generation and compile of some packages

Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-05-26 07:53:03 +02:00
Hannu Nyman
d7a3120cdc tools/libressl: update to 2.5.4
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-05-25 19:01:07 +02:00
Hannu Nyman
8040420b00 tools/flex: update to 2.6.3
* update flex to 2.6.3
* download .tar.gz (as upstream has dropped .xz)
* refresh patches

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-05-25 19:01:07 +02:00
Hannu Nyman
1a0d52a733 tools/cmake: update to 3.8.1
* update cmake to 3.8.1
* refresh patches

Release notes:
https://cmake.org/cmake/help/v3.8/release/3.8.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-05-25 19:01:07 +02:00
Syrone Wong
a0f4b4b3a2 tools/isl: update to 0.18
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2017-05-25 19:01:07 +02:00
Rosen Penev
74f9c9c159 tools: host/include/getline.h: Remove
Seems to be useful only for old and unsupported operating systems. Removed and adjusted the mtd-utils Makefile.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-04-26 10:29:39 +02:00
Daniel Engberg
0685f2a66c tools/upx: Remove from repo
Remove upx from repo, it hasn't been used for a very long time and serves little to no purpose.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-03-20 08:26:35 +01:00
Daniel Engberg
80246ce67e tools/coreutils: Update to 8.27
Update coreutils to 8.27

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-03-20 08:24:34 +01:00
Daniel Engberg
e45ee66149 tools/libressl: Update to 2.5.1
Update libressl to 2.5.1

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-03-20 08:24:13 +01:00
Daniel Engberg
49ded28027 tools/dosfstools: Update to 4.1
Update to 4.1
Remove 0001-mkfs-Default-to-64-32-heads-sectors-for-targets-smal.patch
as it's included in upstream repo.
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-03-20 08:24:05 +01:00
Daniel Engberg
65d2800bd6 tools/sed: Update to 4.4
Update sed to 4.4

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-03-20 08:15:27 +01:00
Kevin Darbyshire-Bryant
2cf00b640d ccache: update to 3.3.4
Update from 3.3.2 to 3.3.4 & refresh patches.

Remove 110-disable-assembler-support as ccache now understands the
'.incbin' directive.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-03-12 15:06:50 +01:00
Rafał Miłecki
dfac808076 firmware-utils: tplink-safeloader: add support for Archer C5 V2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-03-11 12:06:58 +01:00
Etienne Haarsma
d90abebd06 tools/m4: update 1.4.18
Patch 100-fix-gets-removal.patch is removed because it's included in the new version.

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
2017-02-26 13:31:45 +01:00
Furong Xu
8d53e3721c tools: patch-image: fix file descriptor leak.
Maybe this is committed by mistake, fix it.

Signed-off-by: Furong Xu <xfr@outlook.com>
2017-02-15 07:45:24 +01:00
Piotr Dymacz
56561b9f51 ar71xx: add support for TP-Link TL-WA850RE v2
TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/391/195 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x internal antennas (embedded on PCB)
- 9x LED (all can be turned off with GPIO15), 2x button
- UART (J3) header on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in US version of the device, but should work
also with the same device version sold in other countries.

Available FLASH space, with LEDE trunk, is only 240 KB.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-14 12:25:33 +01:00
Etienne Haarsma
0928b6d2ab cmake: update to version 3.7.2
Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
2017-02-09 14:49:25 +01:00
Daniel Engberg
34ba64fe70 tools/e2fsprogs: Update to 1.43.4
* Update to 1.43.4
* Refresh patches
* xz tarball which saves about 2M in size

Changelog: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.43.4

Tested by Etienne Haarsma (ar71xx), Daniel Engberg (kirkwood)

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [use @KERNEL instead of harcoded URL]
2017-02-09 12:26:13 +01:00
Hannu Nyman
eaf3fef946 ccache, samba36: fix samba.org addresses to use https
samba.org has started to enforce https and
currently plain http downloads with curl/wget fail,
so convert samba.org download links to use https.

Modernise links at the same time.

Also convert samba.org URL fields to have https.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2017-02-02 00:14:03 +01:00
FUKAUMI Naoki
7faee1bc9f firmware-utils: improve tools for Buffalo DHP series
some of Buffalo DHP series use slightly different trx magic, buffalo-enc,
buffalo-tag, and factory image begin with 'bgn'.

this patch adds support for building those images.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-31 10:55:02 +01:00
Stijn Tintel
456e1b6481 qemu: rename internal crypto/aes symbols
Qemu's local AES code defines symbols that conflict with
LibreSSL/OpenSSL's libcrypto. Rename them to avoid build problems.

See upstream commit c8d70e59738e672021926c7747af8ef9dea15c82.

Fixes FS#444.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-30 18:37:51 +01:00
Henryk Heisig
e39dc8d823 ar71xx: add support to TP-Link Archer C59v1 and C60v1
TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB

TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")

Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 11:38:21 +01:00
Sergey Sergeev
e2b8e9e0f3 tools: update kernel2minor to 0.24 version
Signed-off-by: Sergey Sergeev <adron@yapic.net>
2017-01-25 07:54:06 +01:00
John Crispin
920ee1f707 Revert "tools: wrt400n: fix making factory images with kernel bigger than 1MB"
This reverts commit 5f9b20bc7d.

The builders were failing with a segfault when generating the image

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-20 06:43:13 +01:00
Yousong Zhou
5f9b20bc7d tools: wrt400n: fix making factory images with kernel bigger than 1MB
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-20 00:44:26 +01:00
Felix Fietkau
d98bb7e6b9 build: extend CONFIG_AUTOREMOVE to tools/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:09 +01:00
Felix Fietkau
131db366a3 build: remove separate /install step for host builds
Reduces the number of recursive make invocations

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-18 23:57:09 +01:00
Alexandru Ardelean
2b84dfafa4 tools/qemu: use default host configure rule ; set appropriate vars & args
Admittedly, this is my own OCD wanting to get rid of this.

Because I tried (a while back to upgrade QEMU to a newer version),
and (during that attempt) I tried to get rid of this.

Tested on Linux & Mac.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-18 08:54:58 +01:00
Alexandru Ardelean
968fa53197 tools/cmake: remove HOST_CONFIGURE_CMD and re-distribute the args & vars
The final semantic is the same, but this is a bit more correct.

Build tested on Windows 10 (yes, there is some
Ubuntu mode for Windows 10, and I've been also building LEDE
on it for a few weeks).

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-01-16 20:40:14 +01:00
Felix Fietkau
6f9011f089 cmake: properly pass host cflags/ldflags to the build
This should hopefully fix build issues where libraries that we ship in
tools/ were accidentally picked up from other places on the system, e.g.
/usr/local

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:43 +01:00
Felix Fietkau
7969770100 cmake: support verbose build that shows compiler commands
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:43 +01:00
Felix Fietkau
d6de31310c cmake: restore parallel build support for bootstrap
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:43 +01:00
Jo-Philipp Wich
43d5339940 tools: cmake: link librt if needed (FS#381)
Patch cmakes cmcurl component to unconditionally link librt when we discover
a clock_gettime() symbol in -lrt.

This is required to sucessfully link LibreSSL's libcrypto which might or
might not reqauire librt.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-11 03:48:30 +01:00
Jo-Philipp Wich
69be65b594 tools: mkimage: pass crypto libraries through HOST_LOADLIBES (FS#381)
Since linker argument order is significant on modern host compilers, pass
the required libcrypto libraries through the HOST_LOADLIBES variable in
order to ensure proper order of the final linker command line.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-11 03:48:30 +01:00
Matthias Schiffer
96a940308b
tools: libressl: always build as PIC
Fixes link errors for host packages like ruby like the following:

/usr/bin/ld: .../staging_dir/host/lib/libcrypto.a(libcrypto_la-md5_dgst.o):
relocation R_X86_64_PC32 against symbol `memcpy@@GLIBC_2.14' can not be used when making a shared object; recompile with -fPIC

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-10 22:15:37 +01:00
Felix Fietkau
828a471e8d tools: remove obsolete yaffs tool
This was added a long time ago and was apparently never used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:40:12 +01:00
Felix Fietkau
a9232ba1ed tools: reorganize dependencies, fix build after deleting staging dir
A lot of packages (especially those using libtool) depend on sed being
available. xz fails on an incremental build pretty early if it's not
there.

Clean up handling if essential core tools (patch, tar, xz), build them
in parallel and make them depend on sed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:39:46 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Felix Fietkau
b9857b21c2 tools/kernel2minor: fix permissions of created files
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-06 16:38:33 +01:00
Felix Fietkau
476e77c3b7 tools/kernel2minor: fix endian conversion issues, allow creating little-endian images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-06 15:34:28 +01:00
Felix Fietkau
8782672b90 tools/kernel2minor: fix portability issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-06 15:34:19 +01:00
Matthias Schiffer
2ee3e8dd42
firmware-utils: tplink-safeloader: add support for TP-Link WBS210/510 1.2
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-05 16:01:17 +01:00
Jo-Philipp Wich
08d73bfdce tools: cmake: use different approach for passing LDFLAGS
Funnel the required LDFLAGS environment through HOST_CONFIGURE_CMD for now
as the HOST_CONFIGURE_VARS semantics are completely broken.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-05 14:34:11 +01:00
Jo-Philipp Wich
f9b253147a tools: cmake: use pkg-config to discover libcrypto linker flags
LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.

Use pkg-config to portably discover the required linker flags.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-05 14:21:27 +01:00
Jo-Philipp Wich
0c03650160 tools: mkimage: use pkg-config to discover libcrypto linker flags
LibreSSL's libcrypto.so has an indirect dependency to librt for clock_gettime()
on Linux.

Use pkg-config to portably discover the required linker flags.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-05 14:21:27 +01:00
Jo-Philipp Wich
bfb2512a4e tools: make libressl build depend on pkg-config
Ensure that pkg-config is available before building libressl as we're going
to need it for setting proper link flags in utilities requiring libcrypto.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-05 14:21:27 +01:00
Felix Fietkau
8160beb014 cmake: update to version 3.7.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 13:45:55 +01:00
Felix Fietkau
a0993dda5f tools: make cmake depend on libressl, one of its utilities uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Felix Fietkau
f6e6341d89 tools: build libressl on all systems
Useful for having a more consistent build environment and finding API
issues faster

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Daniel Engberg
cd18ff9ed6 tools: gmp: Update to 6.1.2
Updates GMP to 6.1.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
54ff3b1def xz: Update to 5.2.3
Update xz to 5.2.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:32 +01:00
Felix Fietkau
2fd5ce9488 libressl: disable shared libraries, fixes build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-28 01:22:26 +01:00
Felix Fietkau
3f55e5aeb5 toolchain: remove ppl/cloog, disable graphite for gcc 4.8
graphite is disabled by default and it's not worth carrying ppl and
cloog for supporting this feature on the old gcc 4.8, which is only used
for ARC

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
18300db77a b43-tools: fix tarball hash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 17:02:42 +01:00
Felix Fietkau
c7c1cf5618 treewide: clean up and unify PKG_VERSION for git based downloads
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:21 +01:00
Henryk Heisig
c8043137bb ramips: Add support to TP-Link Archer MR200
CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-22 15:03:30 +01:00
Radek Dostál
5515edae9f firmware-utils/tplink-safeloader: add support for TP-Link RE450
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[Jo-Philipp Wich: use .support_trail member]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-22 14:50:05 +01:00
Tal Keren
0d9d980ecd firmware-utils: kernel image generator for TP-Link RE450
The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:05 +01:00
Matthias Schiffer
51740990cd
firmware-utils: add support for TL-WR1043ND v4 to mktplinkfw and tplink-safeloader
The TL-WR1043ND v4 uses a kernel image with a mktplinkfw header inside the
os-image partition of a tplink-safeloader image.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-20 14:38:48 +01:00
Jo-Philipp Wich
fff6443b5b
firmware-utils/tplink-safeloader: refactor code for further board support
In order to make it easier to add new boards in the future, refactor the code
to describe the image layouts of supported boards in a struct array and alter
the image generation routines to figure out the sysupgrade partitions
automatically.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-20 14:38:48 +01:00
Jo-Philipp Wich
d58e8a9076
firmware-utils/tplink-safeloader: make vendor data optional
Restructure the code a bit to allow for omitting vendor data when generating
factory images.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-20 14:38:47 +01:00
Felix Fietkau
2b510d97ba tar: fix reproducibility issue
Force root/root as names for uid0/gid0 instead of using the system
names. This helps make packed download tarballs more reproducible

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-19 21:07:39 +01:00
Felix Fietkau
180e93ba8b build: add CHECK_ALL variable to allow make download/check to include not selected packages
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-17 10:36:52 +01:00
Felix Fietkau
7a315b0b5d build: implement make check and make package/X/check
This is intended to be used for a wide array of package sanity checks.

The first check that is implemented is for the hash of downloaded files.
It checks:
  - Missing hash
  - Use of SHA256 instead of MD5
  - dl/<file> hash not matching hash in makefile
  - deprecated MD5SUM variable

The deprecated MD5SUM variable check is skipped for feeds/ until OpenWrt
is updated as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-17 10:36:25 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Jo-Philipp Wich
38ebd1d133 firmware-utils: add E2100L support to addpattern.c
Based on OpenWrt PR#250

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:42:48 +01:00
Matthias Schiffer
d1a2c3f9b1
firmware-utils: tplink-safeloader: update support lists for CPE210/510/...
Adds support for new EU and US variants; removes a few strings that were
never actually used and have been removed from the stock firmwares.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-12 13:46:58 +01:00
Felix Fietkau
a245772291 tools/upslug2: add SHA256 hash to use mirror tarball
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-05 11:37:54 +01:00
Jo-Philipp Wich
0b3b8c83c0 tools: cmake: fix compatibility with LibreSSL as well
Sadly, LibreSSL claims to be OpenSSL v2.0.0 while not providing the new
interfaces introduced with OpenSSL v1.1.x, so extend the pre-OpenSSL 1.1.x
compat checks to consider LibreSSL as well.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-01 16:49:24 +01:00
Jo-Philipp Wich
83697ec389 tools: cmake: import another upstream commit for OpenSSL backwards compatibility
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-01 15:41:40 +01:00
Jo-Philipp Wich
7abd011b0a tools: cmake: import upstream patch for OpenSSL 1.1.x compatibility
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-01 15:02:00 +01:00
Felix Fietkau
e678c9f764 mkimage: fix openssl 1.1.x compat fix with libressl
libressl sets OPENSSL_VERSION_NUMBER to 0x20000000L, which breaks API
checks based on it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-11-30 20:24:33 +01:00
Jo-Philipp Wich
70b104f98c tools: mkimage: fix build with OpenSSL 1.1.x (FS#182)
The OpenSSL 1.1.x version series undergone some major API changes which made
the RSA structure opaque and deprecated a number of methods, so add some
conditional compat code to make the u-boot source build again.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-30 18:20:32 +01:00
Rafał Miłecki
cb7ab730c7 firmware-utils: replace md5 code with Alexander Peslyak's implementation
Our current implementation is pretty old and uses some pre-standard/old
ANSI C style that triggers warnings like:
warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls]

This is caused by declarations specified in a following way:
src/md5.h:60:6: note: 'MD5_Init' was declared here
 void MD5_Init ();

Having these warnings makes it harded to notice real problems. We could
try hiding them but it makes more sense to just use a cleaner code.
Another tiny gain from this switch is slightly reduced binary size, on
x86_64 tplink-safeloader's size 48104 became 48003.

The new code is public domain, uses "heavily cut-down BSD license".

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-28 07:52:31 +01:00
Florian Fainelli
97eff5cba5 firmware-utils: Fix build failure in mkmerakifw.c FS#298
Earlier compilers such as GCC 4 do not like anynomous unions, make it a named
union "u", and update the code where relevant.

Fixes FS#298
Fixes: a72e1692b8 ("firmware-utils: Add support for the Cisco Meraki MX60/MX60W")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-26 22:39:27 +01:00
Hannu Nyman
2c05fd7ef4 tools/cmake: update to 3.7.0
Release notes at
https://cmake.org/cmake/help/v3.7/release/3.7.html

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Hannu Nyman
a22464b92f tools/quilt: update to 0.65
User-visible changes since 0.64 are as follows:

  - Translation fixes
  - Project settings have priority
  - Reject binary files in patches
  - Fix a race condition in diff_file
  - Performance: Optimizations to the setup command
  - Performance: Optimizations to the bash completion script
  - Test suite: Improve the edit test case
  - Test suite: Make the symlink test more robust
  - Test suite: Test backup failure
  - Test suite: Test the header command with hard links
  - diff: Report diff failures
  - edit: Fix a corner case bug
  - mail: Fix the help text
  - push: Fix the synopsis
  - refresh: Do not remove symlinks
  - refresh: Break links to read-only patch files
  - refresh: Always preserve modification time
  - setup: Report failed look-ups in inspect-wrapper
  - quilt.el: Fix quilt-editable when patches are stored in subdirs
  - bash_completion: Handle spaces in file names
  - bash_completion: Update the list of commands
  - bash_completion: Add new command options
  - bash_completion: Fix handling of mail, new, push options
  - guards: Simplify the help text
  - guards: Include the file name also in the "Not found" case
  - guards: Add support for an external filelist in --check mode
  - guards: Report which config file has problem in --check mode
  - guards: Documentation update
  - guards: Clarify a user message

Note to packagers: the Makefile was modified to take configure's
--sysconfdir into account as other projects do. As a result, setting
--prefix=/usr will no longer put the configuration files under /etc.
You now need to explicitly pass --sysconfdir=/etc. If you don't,
configuration files will go under /usr/etc, which is not what you want.
This is somewhat less intuitive, but also more consistent with what
other projects are doing.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Hannu Nyman
a6e790b202 tools/scons: update to 2.5.1
RELEASE 2.5.1 - Mon, 03 Nov 2016 13:37:42 -0400
    - Add scons-configure-cache.py to packaging. It was omitted
    - Use memoization to optimize PATH evaluation across
      all dependencies per node.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-11-26 21:59:40 +01:00
Chris Blake
a72e1692b8 firmware-utils: Add support for the Cisco Meraki MX60/MX60W
This patch adds header support for the Cisco Meraki MX60/MX60W, which
are a part of the apm821xx target. Some structure changes were needed
due to the fact this device uses U-Boot (unlike other devices in
mkmerakifw.c) which uses a different header structure to define the load
offsets for the image.

A thanks to Christian for helping implement this properly.

Cc: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-11-21 11:09:03 +01:00
Rafał Miłecki
0d3be662ce firmware-utils: tplink-safeloader: keep per-device info on trailing char
Recent refactoring introduced a regression. It ignored second argument
of make_support_list function which was originally true for C2600. The
new generic build_image function always passes false.

This patch allows specifying trailing char in a device specific info. It
also switches Archer C9 to the \0 char to make it compliant with vendor
images.

I verified generated images to be binary identical to the ones that
were created before whole refactoring.

Reported-by: Jo-Philipp Wich <jo@mein.io>
Fixes: fd924d2068 ("firmware-utils: tplink-safeloader: use one function for generating images")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-20 17:17:48 +01:00
Rafał Miłecki
222783c65c firmware-utils: tplink-safeloader: add Archer C9 support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:58:25 +01:00
Rafał Miłecki
fd924d2068 firmware-utils: tplink-safeloader: use one function for generating images
Thanks to the struct device_info we can now use one unified function.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:57:58 +01:00
Rafał Miłecki
ea249f01b1 firmware-utils: tplink-safeloader: add struct device_info
This struct stores all device specific info which allows making do_eap
function more generic.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-11-19 07:57:56 +01:00