ar71xx: add support for TP-Link TL-WA855RE v1

TP-Link TL-WA855RE v1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/397/198 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 2x LED (green and orange in the same package), 2x button
- UART: TP5(TX) and TP4(RX) test points on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.

Signed-off-by: Federico Cappon <dududede371@gmail.com>
This commit is contained in:
Federico Cappon 2017-06-09 15:11:39 +00:00 committed by Piotr Dymacz
parent 656ed7544f
commit 9fec39a033
13 changed files with 114 additions and 6 deletions

View file

@ -117,6 +117,7 @@ ar71xx_setup_interfaces()
tl-wa830re-v2|\
tl-wa850re|\
tl-wa850re-v2|\
tl-wa855re-v1)|\
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\

View file

@ -369,6 +369,7 @@ get_status_led() {
tl-wa850re-v2)
status_led="tp-link:blue:re"
;;
tl-wa855re-v1|\
tl-wa860re)
status_led="tp-link:green:power"
;;

View file

@ -234,6 +234,9 @@ tplink_board_detect() {
"085000"*)
model="TP-Link TL-WA850RE"
;;
"085500"*)
model="TP-Link TL-WA855RE"
;;
"086000"*)
model="TP-Link TL-WA860RE"
;;
@ -1058,6 +1061,9 @@ ar71xx_board_detect() {
*"TL-WA850RE v2")
name="tl-wa850re-v2"
;;
*"TL-WA855RE v1")
name="tl-wa855re-v1"
;;
*"TL-WA860RE")
name="tl-wa860re"
;;

View file

@ -411,6 +411,7 @@ platform_check_image() {
tl-wa830re-v2|\
tl-wa850re|\
tl-wa850re-v2|\
tl-wa855re-v1|\
tl-wa860re|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\

View file

@ -183,6 +183,7 @@ CONFIG_ATH79_MACH_TL_WA7210N_V2=y
CONFIG_ATH79_MACH_TL_WA801ND_V3=y
CONFIG_ATH79_MACH_TL_WA830RE_V2=y
CONFIG_ATH79_MACH_TL_WA850RE_V2=y
CONFIG_ATH79_MACH_TL_WA855RE_V1=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WA901ND_V4=y

View file

@ -1503,6 +1503,15 @@ config ATH79_MACH_TL_WA850RE_V2
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_TL_WA855RE_V1
bool "TP-LINK TL-WA855RE V1 support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_TL_WA901ND
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
select SOC_AR724X

View file

@ -188,6 +188,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-wax50re.o
obj-$(CONFIG_ATH79_MACH_TL_WA855RE_V1) += mach-tl-wax50re.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-wa901nd-v4.o

View file

@ -3,11 +3,14 @@
* - TL-WA750RE v1
* - TL-WA801ND v2
* - TL-WA850RE v1/v2
* - TL-WA855RE v1
* - TL-WA901ND v3
*
* Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
* Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
* Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
* Copyright (C) 2017 Federico Cappon <dududede371@gmail.com>
* Copyright (C) 2017 Nicolò Veronese <nicveronese@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@ -48,6 +51,9 @@
#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
#define TL_WA855REV1_GPIO_LED_RED 11
#define TL_WA855REV1_GPIO_LED_GREEN 12
#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
@ -184,6 +190,18 @@ static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
},
};
static struct gpio_led tl_wa855re_v1_leds_gpio[] __initdata = {
{
.name = "tp-link:green:power",
.gpio = TL_WA855REV1_GPIO_LED_GREEN,
.active_low = 0,
}, {
.name = "tp-link:red:power",
.gpio = TL_WA855REV1_GPIO_LED_RED,
.active_low = 0,
},
};
static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
{
.name = "tp-link:green:lan",
@ -383,6 +401,21 @@ static void __init tl_wa850re_v2_setup(void)
MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
"TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
static void __init tl_wa855re_v1_setup(void)
{
tl_ap143_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa855re_v1_leds_gpio),
tl_wa855re_v1_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys),
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA855RE_V1, "TL-WA855RE-v1", "TP-LINK TL-WA855RE v1",
tl_wa855re_v1_setup);
static void __init tl_wa860re_setup(void)
{
tl_ap123_setup();

View file

@ -226,6 +226,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-WA850RE v2 */
ATH79_MACH_TL_WA855RE_V1, /* TP-LINK TL-WA855RE v1 */
ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */

View file

@ -496,18 +496,31 @@ define Device/tl-wa850re-v1
TPLINK_HWID := 0x08500001
endef
define Device/tl-wa850re-v2
define Device/tl-wa85xre
$(Device/tplink)
KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
endef
define Device/tl-wa850re-v2
$(Device/tl-wa85xre)
DEVICE_TITLE := TP-LINK TL-WA850RE v2
DEVICE_PACKAGES := rssileds
BOARDNAME := TL-WA850RE-V2
DEVICE_PROFILE := TLWA850
TPLINK_BOARD_NAME := TLWA850REV2
TPLINK_HWID := 0x08500002
KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
endef
define Device/tl-wa855re-v1
$(Device/tl-wa85xre)
DEVICE_TITLE := TP-LINK TL-WA855RE v1
BOARDNAME := TL-WA855RE-v1
DEVICE_PROFILE := TLWA855RE
TPLINK_HWID := 0x08550001
TPLINK_BOARD_NAME := TLWA855REV1
endef
define Device/tl-wa860re-v1
@ -517,7 +530,7 @@ define Device/tl-wa860re-v1
DEVICE_PROFILE := TLWA860
TPLINK_HWID := 0x08600001
endef
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa860re-v1
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa855re-v1 tl-wa860re-v1
define Device/tl-wa901nd-v1
$(Device/tplink-4m)

View file

@ -146,6 +146,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
# CONFIG_ATH79_MACH_TL_WA901ND is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set

View file

@ -135,6 +135,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
# CONFIG_ATH79_MACH_TL_WA901ND is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set

View file

@ -558,6 +558,45 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the TL-WA855RE v1 */
{
.id = "TLWA855REV1",
.vendor = "",
.support_list =
"SupportList:\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
.support_trail = '\x00',
.soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"os-image", 0x20000, 0x150000},
{"file-system", 0x170000, 0x240000},
{"partition-table", 0x3b0000, 0x02000},
{"default-mac", 0x3c0000, 0x00020},
{"pin", 0x3c0100, 0x00020},
{"product-info", 0x3c1000, 0x01000},
{"soft-version", 0x3c2000, 0x00100},
{"support-list", 0x3c3000, 0x01000},
{"profile", 0x3c4000, 0x08000},
{"user-config", 0x3d0000, 0x10000},
{"default-config", 0x3e0000, 0x10000},
{"radio", 0x3f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system"
},
/** Firmware layout for the TL-WR1043 v4 */
{
.id = "TLWR1043NDV4",