ramips: Add support to TP-Link Archer MR200

CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig 2016-09-24 21:41:43 +02:00 committed by John Crispin
parent 190ee7d86b
commit c8043137bb
9 changed files with 253 additions and 1 deletions

View file

@ -242,6 +242,12 @@ mr-102n)
set_wifi_led "$board:green:wlan"
set_usb_led "$board:green:usb"
;;
mr200)
ucidef_set_led_default "power" "power" "$board:white:power" "1"
ucidef_set_led_netdev "lan" "lan" "$board:white:lan" "eth0.1"
ucidef_set_led_netdev "wan" "wan" "$board:white:wan" "usb0"
set_wifi_led "$board:white:wlan"
;;
mzk-ex750np)
ucidef_set_led_default "power" "power" "$board:red:power" "1"
set_wifi_led "$board:red:wifi"

View file

@ -217,6 +217,11 @@ ramips_setup_interfaces()
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;
mr200)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
ucidef_set_interface_wan "usb0"
;;
mzk-dp150n|\
vocore)
ucidef_add_switch "switch0" \

View file

@ -164,6 +164,9 @@ get_status_led() {
mr-102n)
status_led="$board:amber:status"
;;
mr200)
status_led="$board:white:power"
;;
nw718)
status_led="$board:amber:cpu"
;;

View file

@ -0,0 +1,16 @@
#!/bin/sh /etc/rc.common
. /lib/ramips.sh
START=99
start() {
local board=$(ramips_board_name)
if [ $board = "mr200" ]; then
adb wait-for-device
adb shell chmod +x /WEBSERVER/www/cgi-bin/*
adb shell httpd -h /WEBSERVER/www/ &
echo "2357 000d" > /sys/bus/usb-serial/drivers/option1/new_id
sleep 2
adb kill-server
fi
}

View file

@ -295,6 +295,9 @@ ramips_board_detect() {
*"MR-102N")
name="mr-102n"
;;
*"MR200")
name="mr200"
;;
*"MT7620a + MT7530 evaluation"*)
name="mt7620a_mt7530"
;;

View file

@ -204,7 +204,8 @@ platform_check_image() {
return 0
;;
c20i|\
c50)
c50|\
mr200)
[ "$magic" != "03000000" ] && {
echo "Invalid image type."
return 1

View file

@ -0,0 +1,195 @@
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ralink,mt7620a-soc";
model = "TP-Link Archer MR200";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "mr200:white:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
wan {
label = "mr200:white:wan";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power {
label = "mr200:white:power";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
4g {
label = "mr200:white:4g";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wps {
label = "mr200:white:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
signal1 {
label = "mr200:white:signal1";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
signal2 {
label = "mr200:white:signal2";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
signal3 {
label = "mr200:white:signal3";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
signal4 {
label = "mr200:white:signal4";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wlan {
label = "mr200:white:wlan";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb {
gpio-export,name = "power_usb1";
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7b0000>;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "llll";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&gsw {
mediatek,port4 = "ephy";
};
&wmac {
ralink,mtd-eeprom = <&radio 0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
mediatek,2ghz = <0>;
};
};
};

View file

@ -59,6 +59,16 @@ define Device/ArcherC50
endef
TARGET_DEVICES += ArcherC50
define Device/ArcherMR200
DTS := ArcherMR200
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherMR200 -c
IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherMR200 -j -r $(KDIR)/root.squashfs
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
DEVICE_TITLE := TP-Link ArcherMR200
endef
TARGET_DEVICES += ArcherMR200
define Device/ex2700
DTS := EX2700
BLOCKSIZE := 4k

View file

@ -155,6 +155,12 @@ static struct flash_layout layouts[] = {
.kernel_la = 0x80000000,
.kernel_ep = 0x80000000,
.rootfs_ofs = 0x140000,
}, {
.id = "8MLmtk",
.fw_max_len = 0x7b0000,
.kernel_la = 0x80000000,
.kernel_ep = 0x80000000,
.rootfs_ofs = 0x140000,
}, {
/* terminating entry */
}
@ -191,6 +197,13 @@ static struct board_info boards[] = {
.layout_id = "8Mmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
.id = "ArcherMR200",
.hw_id = 0xd7500001,
.hw_rev = 0x4a,
.layout_id = "8MLmtk",
.hdr_ver = 3,
.endian_swap = true,
}, {
/* terminating entry */
}