KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
27117 commits 3 branches 0 tags 154 MiB
Commit graph

734 commits

Author SHA1 Message Date
Daniel Dickinson
183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise 
SVN-Revision: 24307
 2010-12-07 16:42:23 +00:00
Daniel Dickinson
8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
SVN-Revision: 24305
 2010-12-07 15:15:54 +00:00
Daniel Dickinson
3baa168e09 patches: Refreshed patches after led_count 
SVN-Revision: 24304
 2010-12-07 15:15:51 +00:00
Daniel Dickinson
b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
SVN-Revision: 24303
 2010-12-07 15:15:47 +00:00
Daniel Dickinson
e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
SVN-Revision: 24302
 2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
SVN-Revision: 24276
 2010-12-06 06:46:03 +00:00
Daniel Dickinson
244db5ac6a board definition: Fixed CPVA642 LED definitions 
SVN-Revision: 24275
 2010-12-06 06:45:57 +00:00
Daniel Dickinson
8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
SVN-Revision: 24274
 2010-12-06 04:31:23 +00:00
Daniel Dickinson
7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 
SVN-Revision: 24273
 2010-12-06 02:01:08 +00:00
Daniel Dickinson
9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
SVN-Revision: 24191
 2010-11-28 22:13:00 +00:00
Daniel Dickinson
314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
 2010-11-28 22:04:44 +00:00
Daniel Dickinson
3a49f669f2 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
 2010-11-28 22:04:40 +00:00
Daniel Dickinson
c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
 2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
 2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
 2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
 2010-11-28 22:04:19 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Daniel Dickinson
195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
SVN-Revision: 24127
 2010-11-24 11:06:13 +00:00
Daniel Dickinson
0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
SVN-Revision: 24118
 2010-11-23 20:17:08 +00:00
Daniel Dickinson
049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
SVN-Revision: 24040
 2010-11-19 13:41:54 +00:00
Daniel Dickinson
eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). 
SVN-Revision: 24011
 2010-11-16 06:46:53 +00:00
Claudio Mignanti
7583fe8668 Add wps button on alice gate 
SVN-Revision: 23903
 2010-11-06 21:08:44 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli
ffc84cf75c register uart driver on livebox (#8013) 
SVN-Revision: 23653
 2010-10-27 10:02:13 +00:00
Florian Fainelli
7bf5647070 refresh 2.6.35 patches 
SVN-Revision: 23652
 2010-10-27 10:02:08 +00:00
Claudio Mignanti
697d3e7066 Fix nxp_74hc164 driver compile error (builbot) 
SVN-Revision: 23623
 2010-10-24 16:10:41 +00:00
Florian Fainelli
20d28f7685 fix platform_devices registration 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 23517
 2010-10-18 19:49:54 +00:00
Florian Fainelli
af0e5167bc add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558) 
SVN-Revision: 23508
 2010-10-17 17:45:50 +00:00
Florian Fainelli
9d9e3fed62 remove 2.6.32 support 
SVN-Revision: 23505
 2010-10-17 16:32:35 +00:00
Florian Fainelli
a1ea84dbb6 fix SPI driver, move register out of driver code 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com

SVN-Revision: 23504
 2010-10-17 14:09:30 +00:00
Florian Fainelli
1a13c39f76 restore kernel oldconfig 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23503
 2010-10-17 14:09:24 +00:00
Florian Fainelli
265bf2ccb0 refresh patches 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23502
 2010-10-17 14:09:04 +00:00
Florian Fainelli
9f4c51acb7 refresh nb4 support. Register 74x164 device 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23501
 2010-10-17 14:08:57 +00:00
Florian Fainelli
8cbd9d5a2e add spi devices board info int bcm63xx_boards 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23500
 2010-10-17 14:08:51 +00:00
Florian Fainelli
b65e494976 add 74x164 SPI chip support 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23499
 2010-10-17 14:08:45 +00:00
Florian Fainelli
cd9b90235c backport SPI master with no RXTX support (from 2.6.36) 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23498
 2010-10-17 14:08:39 +00:00
Florian Fainelli
d5854cfd4d register earlier extended platform devices 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23497
 2010-10-17 14:08:34 +00:00
Lars-Peter Clausen
83d6a36019 update 2.6.35.x to 2.6.35.7 
SVN-Revision: 23213
 2010-10-04 07:42:32 +00:00
Florian Fainelli
bbca651e1b remove wpa-supplicant and iw from the Tecom GW6x00 profile 
SVN-Revision: 23051
 2010-09-13 08:30:35 +00:00
Florian Fainelli
d3e206ad96 default to using 2.6.35 
SVN-Revision: 23038
 2010-09-12 21:23:53 +00:00
Florian Fainelli
dc1302fdf9 remove 2.6.33 support 
SVN-Revision: 23037
 2010-09-12 21:23:47 +00:00
Florian Fainelli
327ac42dca change the Tecom GW6x00 profile to use wl instead of b43 
SVN-Revision: 23036
 2010-09-12 21:23:41 +00:00
Florian Fainelli
f4f789f211 register udc and spi devices at the correct init level 
SVN-Revision: 23035
 2010-09-12 21:23:35 +00:00
Florian Fainelli
fab2e77357 refresh 2.6.35 patches 
SVN-Revision: 23034
 2010-09-12 21:23:29 +00:00
Jo-Philipp Wich
867ac59ff9 enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx 
SVN-Revision: 22846
 2010-08-30 22:59:20 +00:00
Florian Fainelli
2e343d9760 add 2.6.35 support 
SVN-Revision: 22800
 2010-08-25 19:56:08 +00:00
Florian Fainelli
b1becffa5b update to 2.6.32.20 
SVN-Revision: 22766
 2010-08-22 17:07:37 +00:00
Daniel Dickinson
a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off 
SVN-Revision: 22466
 2010-08-02 19:33:08 +00:00
Daniel Dickinson
d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit 
SVN-Revision: 22465
 2010-08-02 19:32:59 +00:00
Daniel Dickinson
99d0f9ea05 patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 
SVN-Revision: 22464
 2010-08-02 19:32:40 +00:00
Jo-Philipp Wich
00cc52f14b reorder profiles 
SVN-Revision: 22390
 2010-07-26 18:58:35 +00:00
Jo-Philipp Wich
7831006360 fix a typo in 040-bcm963xx_flashmap.patch 
SVN-Revision: 22386
 2010-07-25 00:10:37 +00:00
Imre Kaloz
ca8f45b142 update kernel versions 
SVN-Revision: 22289
 2010-07-19 11:34:03 +00:00
Florian Fainelli
f6935a4bdb fix alice gate2 internet:green led (#6743) 
SVN-Revision: 22273
 2010-07-18 10:29:44 +00:00
Jo-Philipp Wich
abdf25b045 add required exports for wl.ko 
SVN-Revision: 22174
 2010-07-13 17:03:56 +00:00
Claudio Mignanti
2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
SVN-Revision: 22145
 2010-07-12 14:06:13 +00:00
Jo-Philipp Wich
1650f33f97 add a wifi profile for proprietary wl 
SVN-Revision: 22009
 2010-07-01 01:39:04 +00:00
Florian Fainelli
fb94196462 add missing alice gate2 leds (#6743) 
SVN-Revision: 21785
 2010-06-13 12:20:53 +00:00
Florian Fainelli
145fd381d7 do not override cfg80211-related config symbols 
SVN-Revision: 21769
 2010-06-12 18:10:16 +00:00
Gabor Juhos
9bc1e548a1 generic: move more common options to generic configuration 
* CONFIG_ABX500_CORE
 * CONFIG_ATOMIC64_SELFTEST
 * CONFIG_BRIDGE_IGMP_SNOOPING
 * CONFIG_CAIF
 * CONFIG_CEPH_FS
 * CONFIG_CRYSTALHD
 * CONFIG_DEFAULT_SECURITY_SELINUX
 * CONFIG_DEFAULT_SECURITY_SMACK
 * CONFIG_DEFAULT_SECURITY_TOMOYO
 * CONFIG_DT3155
 * CONFIG_IP_MROUTE_MULTIPLE_TABLES
 * CONFIG_L2TP
 * CONFIG_LOGFS
 * CONFIG_LPC_SCH
 * CONFIG_MFD_JANZ_CMODIO
 * CONFIG_MFD_RDC321X
 * CONFIG_N_GSM
 * CONFIG_RAMOOPS
 * CONFIG_SERIAL_ALTERA_JTAGUART
 * CONFIG_SERIAL_ALTERA_UART
 * CONFIG_SERIAL_TIMBERDALE
 * CONFIG_SM_FTL
 * CONFIG_SQUASHFS_XATTRS

SVN-Revision: 21750
 2010-06-10 10:45:51 +00:00
Gabor Juhos
2f328ce488 generic: move some common symbols to generic configuration 
* CONFIG_MUTEX_SPIN_ON_OWNER
 * CONFIG_DEFAULT_HYDLA
 * CONFIG_DEFAULT_VENO

SVN-Revision: 21748
 2010-06-10 08:58:14 +00:00
Gabor Juhos
5cad9d5c73 generic: standardize CONFIG_INLINE_* symbols usage 
SVN-Revision: 21746
 2010-06-10 08:09:41 +00:00
Daniel Dickinson
f296eeab53 brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design) 
SVN-Revision: 21631
 2010-05-30 02:04:56 +00:00
Daniel Dickinson
6a267cfa76 brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods 
SVN-Revision: 21630
 2010-05-30 01:44:37 +00:00
Daniel Dickinson
40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21629
 2010-05-30 01:33:20 +00:00
Daniel Dickinson
82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21628
 2010-05-30 01:33:09 +00:00
Daniel Dickinson
cc8fba8441 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) 
SVN-Revision: 21627
 2010-05-30 01:32:58 +00:00
Daniel Dickinson
bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21626
 2010-05-30 01:32:47 +00:00
Nicolas Thill
e74e289fa8 update linux kernel to 2.6.32.14 
SVN-Revision: 21583
 2010-05-27 18:09:09 +00:00
Nicolas Thill
46e2eea1ef target/linux: refresh 2.6.32 patches 
SVN-Revision: 21566
 2010-05-24 20:35:46 +00:00
Hauke Mehrtens
b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Florian Fainelli
f89ff525ee revert r21085, fixes #7282 
SVN-Revision: 21352
 2010-05-04 08:07:39 +00:00
Florian Fainelli
1017215649 do not write to per-port over-current register, which is bogus (#6898) 
SVN-Revision: 21306
 2010-05-02 19:14:10 +00:00
Raphaël Huck
f87eac79bb rename reset_buttons to buttons 
SVN-Revision: 21255
 2010-04-29 12:54:24 +00:00
Raphaël Huck
ccfe1f7886 add WPS button support for nb4 boards 
SVN-Revision: 21254
 2010-04-29 12:51:41 +00:00
Raphaël Huck
b29ef93886 fix gpio button key code, match button-hotplug code 
SVN-Revision: 21253
 2010-04-29 12:51:02 +00:00
Raphaël Huck
5af6e7724b fix gpio_button device register 
SVN-Revision: 21252
 2010-04-29 12:50:09 +00:00
Raphaël Huck
73e450f44a fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel 
SVN-Revision: 21231
 2010-04-28 12:30:32 +00:00
Raphaël Huck
1a07f81239 extend bcm63xx_wdt driver for debugging purposes, thx Miguel 
SVN-Revision: 21199
 2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis
fdac9ae836 sync to kernel 2.6.32.12 
SVN-Revision: 21195
 2010-04-27 14:30:08 +00:00
Raphaël Huck
8df378a918 add neufbox 4 board support, thx Miguel & Florian 
SVN-Revision: 21193
 2010-04-27 13:49:31 +00:00
Raphaël Huck
266c0bf900 add NXP 74HC164 chip driver support, thx Miguel & Florian 
SVN-Revision: 21192
 2010-04-27 13:48:26 +00:00
Raphaël Huck
cf1654354b add extended platform devices patch, thx Miguel & Florian 
SVN-Revision: 21191
 2010-04-27 13:46:22 +00:00
Florian Fainelli
d15e136deb fix spi chip select configuration 
SVN-Revision: 21164
 2010-04-26 13:33:48 +00:00
Florian Fainelli
84dd37d930 fix bcm6358 spi base register address (#7234) 
SVN-Revision: 21163
 2010-04-26 09:22:27 +00:00
Florian Fainelli
52231f694d the SPI_CMD register is 16-bits wide 
SVN-Revision: 21162
 2010-04-26 09:22:23 +00:00
Nicolas Thill
b1b2b04639 package/kernel: move PCMCIA modules to their own file & submenu 
SVN-Revision: 21136
 2010-04-24 13:53:31 +00:00
Nicolas Thill
484051d055 package/kernel: move target specific modules to their own target files 
SVN-Revision: 21132
 2010-04-24 13:34:51 +00:00
Florian Fainelli
2bab1a43be register spi controller, remove whitespaces 
SVN-Revision: 21096
 2010-04-22 16:35:49 +00:00
Florian Fainelli
6b423d5ecb resync 2.6.33 mtd patch with the one for 2.6.32 
SVN-Revision: 21095
 2010-04-22 16:35:44 +00:00
Florian Fainelli
41836b16bb fix wrong refresh on flashmap patch 
SVN-Revision: 21094
 2010-04-22 16:35:01 +00:00
Florian Fainelli
ca3e07d639 re-instate SPI support 
SVN-Revision: 21087
 2010-04-22 15:27:51 +00:00
Florian Fainelli
0b47141194 refresh 2.6.32 patches 
SVN-Revision: 21086
 2010-04-22 15:27:46 +00:00
Florian Fainelli
be2a5389e6 alwasy read imagetag with 64K erase block size 
SVN-Revision: 21085
 2010-04-22 15:27:42 +00:00
Gabor Juhos
81062a12ac kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels 
SVN-Revision: 21081
 2010-04-22 07:12:09 +00:00
Daniel Dickinson
fe5d55977e tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120 
SVN-Revision: 20850
 2010-04-14 00:45:48 +00:00
Nicolas Thill
e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files 
SVN-Revision: 20834
 2010-04-12 23:15:56 +00:00
Florian Fainelli
b87e590b24 do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 
SVN-Revision: 20765
 2010-04-09 18:43:36 +00:00
Florian Fainelli
2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. 
SVN-Revision: 20652
 2010-04-01 21:20:43 +00:00
Florian Fainelli
dad85cddac move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it 
SVN-Revision: 20548
 2010-03-28 18:11:06 +00:00
Gabor Juhos
e66a368bd1 kernel: update to 2.6.32.10 
SVN-Revision: 20444
 2010-03-26 10:45:25 +00:00
Florian Fainelli
10d4e5b4b0 drop support for 2.6.30 kernel 
SVN-Revision: 20438
 2010-03-26 10:12:48 +00:00
Florian Fainelli
928dfc550f add support for D4PW board, patch from mexit 
SVN-Revision: 20420
 2010-03-25 12:06:01 +00:00
Florian Fainelli
f2e91995ea refresh 2.6.32 patches, fix livebox support (#6821) 
SVN-Revision: 20204
 2010-03-14 16:21:28 +00:00
Nicolas Thill
e1863691d9 do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) 
SVN-Revision: 20136
 2010-03-11 09:50:11 +00:00
Florian Fainelli
2c13d45b29 do not register devices in device_initcall level, this breaks the SSB SPROM registration 
SVN-Revision: 19957
 2010-03-02 21:49:37 +00:00
Florian Fainelli
0cd5b9983f remove mail headers from patches 
SVN-Revision: 19935
 2010-03-01 14:55:34 +00:00
Florian Fainelli
4f4066d3e0 add support for 2.6.33 
SVN-Revision: 19921
 2010-02-28 21:24:34 +00:00
Florian Fainelli
984ac762e4 add support for 2.6.32, dropped the SPI patch for now 
SVN-Revision: 19919
 2010-02-28 20:50:51 +00:00
Florian Fainelli
ada5848ba6 build images for RG100A (bcm6358-based boards) (#6755) 
SVN-Revision: 19894
 2010-02-28 11:09:39 +00:00
Florian Fainelli
12a2f9b7b8 fix gpio-leds registration for boards having less than 8 LEDs (#6528) 
SVN-Revision: 19793
 2010-02-21 14:27:17 +00:00
Florian Fainelli
8a1f7817d1 fix the receiving of packets with a 1500 mtu and vlan enabled (#6698) 
SVN-Revision: 19753
 2010-02-19 11:56:13 +00:00
Imre Kaloz
825b37cc56 clean up handling of some kernel symbols 
SVN-Revision: 19581
 2010-02-11 09:33:16 +00:00
Florian Fainelli
e716256d86 fix printing of mtd offsets, remove whitespaces. 
SVN-Revision: 19475
 2010-01-31 21:37:25 +00:00
Florian Fainelli
b8d99458ff move files to files-2.6.30, to ease newer kernel integration 
SVN-Revision: 19471
 2010-01-31 21:00:50 +00:00
Daniel Dickinson
022594b0ed brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261 
SVN-Revision: 19361
 2010-01-28 16:54:00 +00:00
Felix Fietkau
2aa0d20756 replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images 
SVN-Revision: 19293
 2010-01-23 17:21:18 +00:00
Daniel Dickinson
f623119680 Fix typo in AGPF_S0 reset button definition 
SVN-Revision: 19160
 2010-01-16 03:13:56 +00:00
Claudio Mignanti
b031e14bf0 bcm63xx: add gpio leds to alice gate 
SVN-Revision: 19152
 2010-01-15 13:30:46 +00:00
Florian Fainelli
a47b8566a1 update to 2.6.30, refresh patches 
SVN-Revision: 18635
 2009-12-04 14:52:45 +00:00
Felix Fietkau
fa0396c530 kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config 
SVN-Revision: 18603
 2009-11-29 14:31:55 +00:00
Florian Fainelli
0adbdf6409 add support for the RTA1025W_16 board (#5979) 
SVN-Revision: 18476
 2009-11-22 14:53:20 +00:00
Imre Kaloz
6b280112f2 some more Kconfig symbol move.. 
SVN-Revision: 18371
 2009-11-11 11:52:41 +00:00
Imre Kaloz
1d62d9a95c another round of kernel config cleanups 
SVN-Revision: 18370
 2009-11-11 11:42:24 +00:00
Imre Kaloz
ef42fb4c13 sort all target config files 
SVN-Revision: 18367
 2009-11-11 09:27:13 +00:00
Florian Fainelli
e9a02ff509 merge upstream fixes on mdio loop 
SVN-Revision: 18335
 2009-11-07 12:48:17 +00:00
Florian Fainelli
9a84de9e01 images without tagid now fallback to the untouched partition layout (#6093) 
SVN-Revision: 18288
 2009-11-03 19:59:04 +00:00
Florian Fainelli
5e7b871d8a remove no longer used configs and patches 
SVN-Revision: 18221
 2009-10-30 09:55:53 +00:00
Florian Fainelli
411d1ba1bb do not generate trx images, this is useless 
SVN-Revision: 18204
 2009-10-29 13:39:29 +00:00
Florian Fainelli
338490bd50 remove 2.6.28 support, we never really used it 
SVN-Revision: 18156
 2009-10-25 21:13:46 +00:00
Florian Fainelli
7100c1efd9 switch to 2.6.30.9 
SVN-Revision: 18155
 2009-10-25 21:10:53 +00:00
Florian Fainelli
46c66bba36 update to 2.6.27.35 
SVN-Revision: 18125
 2009-10-23 09:12:17 +00:00
Nicolas Thill
f22156bf9e brcm63xx: fix cardbus support with BCM6358 (closes: #5918) 
SVN-Revision: 17935
 2009-10-05 20:40:05 +00:00
Andy Boyett
c85a89348f move IMAGE_CMDLINE_HACK default to generic from targets 
SVN-Revision: 17905
 2009-10-05 17:05:34 +00:00
Imre Kaloz
85fcc97a13 update to latest 2.6.27 and 2.6.30 kernels 
SVN-Revision: 17602
 2009-09-17 11:22:33 +00:00
Florian Fainelli
031e6f65ba update to 2.6.27.33 
SVN-Revision: 17569
 2009-09-11 07:45:08 +00:00
Gabor Juhos
47c0d7419f kernel: get rid of the simple_prom_emulator, it is not really useful 
SVN-Revision: 17567
 2009-09-10 18:30:20 +00:00
Gabor Juhos
d59f5b3a98 kernel: add generic image_cmdline hack to MIPS targets 
SVN-Revision: 17563
 2009-09-10 18:30:01 +00:00
Florian Fainelli
43d0be69d7 update to 2.6.27.32 
SVN-Revision: 17548
 2009-09-09 07:13:09 +00:00
Florian Fainelli
b9c0291e32 prevent gpio-buttons registration failure 
SVN-Revision: 17542
 2009-09-08 15:24:06 +00:00
Florian Fainelli
8ceff55a08 fix typos against the gpio buttons driver (#5804) 
SVN-Revision: 17538
 2009-09-07 18:17:45 +00:00
Florian Fainelli
65fa1debda add infrastructure to register gpio-input reset button 
SVN-Revision: 17526
 2009-09-06 13:54:17 +00:00
Florian Fainelli
294ec33e47 fix reboot hang on bcm6345, thanks AndyI 
SVN-Revision: 17465
 2009-09-02 08:32:00 +00:00
Florian Fainelli
63b86723b1 switch to 2.6.27.30 
SVN-Revision: 17291
 2009-08-17 09:17:06 +00:00
Florian Fainelli
3fd180eb53 add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA 
SVN-Revision: 17234
 2009-08-12 08:41:47 +00:00
Florian Fainelli
7610c78205 fix typo, INT_MASK is writable, INT_STATUS is not 
SVN-Revision: 17229
 2009-08-11 18:57:04 +00:00
Florian Fainelli
dd8b0f9fb9 more bcm63xx definition fixes, thanks AndyI 
SVN-Revision: 17227
 2009-08-11 18:50:07 +00:00
Florian Fainelli
85698765da add support for the Pirelli AG226G board (#5337) 
SVN-Revision: 17190
 2009-08-09 10:19:47 +00:00
Florian Fainelli
2d629e3a01 remove useless hard reset in the SPI controller driver 
SVN-Revision: 17189
 2009-08-09 10:18:30 +00:00
Florian Fainelli
2437f53f1d fix assignment instead of comparison in the mtd driver (#5649) 
SVN-Revision: 17188
 2009-08-09 10:08:07 +00:00
Florian Fainelli
8866ab8a02 merge upstream fixes for bcm63xx_enet 
SVN-Revision: 17175
 2009-08-08 11:25:36 +00:00
Florian Fainelli
5138aa203e bcm6345 fixes from AndyI 
SVN-Revision: 17153
 2009-08-06 20:33:42 +00:00
Florian Fainelli
48c1634d3e fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI 
SVN-Revision: 17149
 2009-08-06 18:53:44 +00:00
Florian Fainelli
dd78f746a5 disable watchdog for bcm6345 until it gets fixed 
SVN-Revision: 17148
 2009-08-06 18:44:20 +00:00
Florian Fainelli
39c22483bd fix printing of offsets 
SVN-Revision: 17099
 2009-08-02 13:50:39 +00:00
Florian Fainelli
85119470d2 add experimental support for 2.6.30.4 
SVN-Revision: 17081
 2009-08-01 16:56:36 +00:00
Florian Fainelli
e58d0f346d more bcm6345 fixes and definitions, thanks to AndyI 
SVN-Revision: 17066
 2009-07-31 20:15:43 +00:00
Florian Fainelli
c5879ba76d refresh 2.6.27 patches 
SVN-Revision: 17061
 2009-07-31 11:10:20 +00:00
Florian Fainelli
252607a79c update to 2.6.27.29 
SVN-Revision: 17060
 2009-07-31 11:09:27 +00:00
Florian Fainelli
dd622864e1 generate images for RTA1025W_16-based routers (#5594) 
SVN-Revision: 17058
 2009-07-31 10:47:00 +00:00
Florian Fainelli
9887dc6100 add experimental support for 2.6.28.10, tested on bcm6338 
SVN-Revision: 17054
 2009-07-30 21:29:25 +00:00
Florian Fainelli
3c806e767e enable 6345 support now that it boots up to user-space 
SVN-Revision: 17033
 2009-07-27 23:04:58 +00:00
Florian Fainelli
dabf5e71a6 fix typo for the flash start address on bcm6345 
SVN-Revision: 17032
 2009-07-27 22:31:28 +00:00
Florian Fainelli
103c99b960 switch to 2.6.27.28 
SVN-Revision: 17027
 2009-07-27 10:01:33 +00:00
Florian Fainelli
4d38620058 fix malformed patch 
SVN-Revision: 16975
 2009-07-25 16:18:02 +00:00
Florian Fainelli
755aae526a bcm6345 does not seem to handle r4k_wait correctly, disable it (#5474) 
SVN-Revision: 16971
 2009-07-24 20:25:31 +00:00
Florian Fainelli
c4d517c7bb use 2.6.27.7 
SVN-Revision: 16968
 2009-07-24 17:03:03 +00:00
Florian Fainelli
5df0606265 fix typos introduced in 16942 
SVN-Revision: 16943
 2009-07-21 12:22:01 +00:00
Florian Fainelli
8b17c74376 make the ethernet driver compile with newer kernels 
SVN-Revision: 16942
 2009-07-21 11:48:08 +00:00
Florian Fainelli
43a3f9555a request irq with the platform driver name instead of bus_id which is being removed in newer kernels 
SVN-Revision: 16932
 2009-07-20 10:52:08 +00:00
Florian Fainelli
a0a85ba7c6 we are using the default-on trigger for power LEDs, no need to change their state from userspace 
SVN-Revision: 16892
 2009-07-18 09:27:33 +00:00
Florian Fainelli
ecad504c39 register GPIO-connected LEDs for known boards 
SVN-Revision: 16887
 2009-07-18 00:40:23 +00:00
Florian Fainelli
fe05e1f37a mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358 
SVN-Revision: 16882
 2009-07-17 15:58:06 +00:00
Florian Fainelli
d0fdf2c5ed fix comment only valid for bcm6345 
SVN-Revision: 16881
 2009-07-17 15:57:09 +00:00
Florian Fainelli
349d57eee4 resync kernel configuration and enable kexec 
SVN-Revision: 16795
 2009-07-12 11:31:00 +00:00
Florian Fainelli
9d2522748f add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big 
SVN-Revision: 16709
 2009-07-06 11:28:34 +00:00
Florian Fainelli
9a387036d2 add a profile with no Wi-Fi drivers enabled, useful for bcm6338 
SVN-Revision: 16708
 2009-07-06 11:21:22 +00:00
Florian Fainelli
fefeecf52f update to latest 2.6.27.26 stable kernel 
SVN-Revision: 16659
 2009-07-03 09:31:52 +00:00
Florian Fainelli
0bda624fc7 add the infrastructure to use a MPI/GPIO connected VoIP DSP 
SVN-Revision: 16650
 2009-07-01 21:00:41 +00:00
Florian Fainelli
8a8943671a fixes for the bcm6338 clocks, thanks Maxime 
SVN-Revision: 16640
 2009-07-01 13:49:20 +00:00
Florian Fainelli
5a7c5b2d36 a couple of more fixes to get 6345 booting up to the console handover 
SVN-Revision: 16636
 2009-06-30 13:45:49 +00:00
Florian Fainelli
8179904540 shared DMA zone is twice smaller on 6338 
SVN-Revision: 16608
 2009-06-28 20:06:44 +00:00
Florian Fainelli
e6d307ab4b turn on size optimization for bcm63xx 
SVN-Revision: 16607
 2009-06-28 20:06:13 +00:00
Florian Fainelli
4096da301d off-by-one gpio numbers for bcm6338 
SVN-Revision: 16597
 2009-06-28 04:23:11 +00:00
Florian Fainelli
8813961e86 bcm6338 can support PCI since it has MPI 
SVN-Revision: 16592
 2009-06-27 21:43:55 +00:00
Florian Fainelli
ca5de76ed3 more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly 
SVN-Revision: 16589
 2009-06-27 20:32:43 +00:00
Florian Fainelli
d02d75ba02 fix the flash address comment and register the flash device again with its proper physical address on 6338/6345 
SVN-Revision: 16587
 2009-06-27 18:58:00 +00:00
Florian Fainelli
0bb3a46217 fix a stupid typo preventing the board from being detected 
SVN-Revision: 16586
 2009-06-27 18:30:45 +00:00
Florian Fainelli
bcc1dd7f99 prevent bcm6338 and bcm6345 from crashing very early 
SVN-Revision: 16585
 2009-06-27 18:23:58 +00:00
Florian Fainelli
7da8855c79 only register fallback sprom and enable PCI if we actually have support for PCI 
SVN-Revision: 16581
 2009-06-27 16:17:18 +00:00
Florian Fainelli
bf0942ce5c do not bloat the kernel with experimental bcm6345 for now 
SVN-Revision: 16580
 2009-06-27 15:52:03 +00:00
Florian Fainelli
13a8ed9ca0 more missing register definitions for bcm6338 
SVN-Revision: 16579
 2009-06-27 15:51:27 +00:00
Florian Fainelli
287a2c0ba9 more bcm6338 and bcm6345 related fixes 
SVN-Revision: 16568
 2009-06-26 12:34:35 +00:00
Florian Fainelli
8c4137900c define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338 
SVN-Revision: 16567
 2009-06-26 11:08:12 +00:00
Florian Fainelli
45c25ff988 generate images for the bcm6338w 
SVN-Revision: 16566
 2009-06-26 10:27:37 +00:00
Florian Fainelli
e86e91380a add board definitions for the bcm6338w 
SVN-Revision: 16565
 2009-06-26 10:27:13 +00:00
Florian Fainelli
1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364) 
SVN-Revision: 16506
 2009-06-18 15:00:32 +00:00
Florian Fainelli
606193fc1f generate experimental images for bcm6338 boards, thanks to Daniel Dickinson 
SVN-Revision: 16490
 2009-06-17 13:16:59 +00:00
Florian Fainelli
a68fe5655e use 2.6.27.5 
SVN-Revision: 16486
 2009-06-17 08:46:47 +00:00
Imre Kaloz
c83b031b84 use the same i/o schedulers for all targets 
SVN-Revision: 16479
 2009-06-15 20:43:02 +00:00
Florian Fainelli
cc12508ee3 use build system REVISION variable (#5317) 
SVN-Revision: 16400
 2009-06-10 13:43:48 +00:00
Florian Fainelli
ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. 
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>

SVN-Revision: 16396
 2009-06-10 08:24:13 +00:00
Florian Fainelli
e9c22f7939 cleanup the watchdog driver a bit 
SVN-Revision: 16395
 2009-06-09 21:35:51 +00:00
Florian Fainelli
972619416e fix the watchdog driver and enable it by default 
SVN-Revision: 16394
 2009-06-09 21:28:15 +00:00
Florian Fainelli
01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). 
SVN-Revision: 16393
 2009-06-09 08:04:52 +00:00
Florian Fainelli
4f72fef05e remove this line which got accidentaly succesfully applied, but should not have (#5285) 
SVN-Revision: 16380
 2009-06-08 13:42:11 +00:00
Florian Fainelli
8f84508c25 fix ethernet driver removal 
SVN-Revision: 16335
 2009-06-04 10:04:53 +00:00
Florian Fainelli
50936e1aa5 fix pcmcia device removal 
SVN-Revision: 16334
 2009-06-04 10:04:11 +00:00
Florian Fainelli
116a53a154 add missing null entry in pcmcia driver 
SVN-Revision: 16333
 2009-06-04 10:03:41 +00:00
Florian Fainelli
4049592268 request gpio pins and set direction correctly for pcmcia 
SVN-Revision: 16332
 2009-06-04 10:03:03 +00:00
Florian Fainelli
287a0efd68 be SMP safe even with gpiolib 
SVN-Revision: 16331
 2009-06-04 10:02:23 +00:00
Florian Fainelli
9013e936ed cache gpio values in gpio_set 
SVN-Revision: 16330
 2009-06-04 10:01:55 +00:00
Florian Fainelli
1208ffaedb use the correct number of GPIOs for bcm6358 
SVN-Revision: 16329
 2009-06-04 10:01:03 +00:00
Florian Fainelli
c95420f06d register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback 
SVN-Revision: 16328
 2009-06-04 09:59:28 +00:00
Florian Fainelli
d2b2ce325a merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU. 
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.

SVN-Revision: 16302
 2009-06-03 08:55:18 +00:00
Florian Fainelli
05b40c8d13 backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time 
SVN-Revision: 16277
 2009-06-01 18:27:51 +00:00
Florian Fainelli
9be0df0caa include wpa-supplicant iw in the default profile 
SVN-Revision: 16195
 2009-05-29 15:33:14 +00:00
Florian Fainelli
027d6ac4c5 also include the SPI driver in the gw6x00 profile 
SVN-Revision: 16077
 2009-05-26 11:15:27 +00:00
Florian Fainelli
a94930dbbb include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking 
SVN-Revision: 16075
 2009-05-26 10:25:55 +00:00
Florian Fainelli
fa45acd690 add the Tecom GW6x00 (6000 and 6200) board profile 
SVN-Revision: 16059
 2009-05-25 16:14:13 +00:00
Florian Fainelli
f150bc5e36 update to new stable 2.6.27.24 
SVN-Revision: 15931
 2009-05-20 09:00:09 +00:00
Florian Fainelli
1322e2721a disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211 
SVN-Revision: 15926
 2009-05-19 18:15:19 +00:00
Imre Kaloz
e965c02820 even more config file cleanup 
SVN-Revision: 15913
 2009-05-18 13:21:25 +00:00
Florian Fainelli
ce87c61ae9 add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later 
SVN-Revision: 15911
 2009-05-18 11:11:23 +00:00
Florian Fainelli
0d7f5f8d2c add support for sysupgrade (#5117) 
SVN-Revision: 15900
 2009-05-17 16:53:57 +00:00
Imre Kaloz
91e866f383 config cleanups 
SVN-Revision: 15861
 2009-05-15 10:40:04 +00:00
Imre Kaloz
26b42d5807 cardbus != pcmcia -- disable it in b43 
SVN-Revision: 15857
 2009-05-15 08:58:02 +00:00
Florian Fainelli
480b27e9f9 add missing configuration symbol 
SVN-Revision: 15856
 2009-05-15 07:04:32 +00:00
Imre Kaloz
6bfddb152f some additional config file cleanup.. 
SVN-Revision: 15845
 2009-05-14 13:32:34 +00:00
Imre Kaloz
c83d91fcfc unify congestion control options 
SVN-Revision: 15844
 2009-05-14 12:42:07 +00:00
Imre Kaloz
a9c958c2de make kernels use /etc/preinit by default 
SVN-Revision: 15840
 2009-05-14 10:20:53 +00:00
Florian Fainelli
01be18725f also supports pcmcia 
SVN-Revision: 15693
 2009-05-07 15:25:15 +00:00
Imre Kaloz
e9b397805d some more kernel config cleanup.. last for today :) 
SVN-Revision: 15606
 2009-05-04 20:57:02 +00:00
Imre Kaloz
0f2b1d070a more cleanup 
SVN-Revision: 15605
 2009-05-04 20:31:47 +00:00
Imre Kaloz
a614251e6c cleanup MTD option handling 
SVN-Revision: 15602
 2009-05-04 19:13:43 +00:00
Imre Kaloz
38c5311047 move MFD stuff to the generic kernel configs 
SVN-Revision: 15587
 2009-05-04 13:51:29 +00:00
Imre Kaloz
64fbade939 refresh patches 
SVN-Revision: 15581
 2009-05-04 11:35:08 +00:00
Imre Kaloz
86a4a6edb9 upgrade to newest stable kernel versions 
SVN-Revision: 15575
 2009-05-03 16:58:06 +00:00
Florian Fainelli
a036aca55c now that we register gpiodev, also include gpioctl in the default image 
SVN-Revision: 15510
 2009-04-30 14:09:45 +00:00
Florian Fainelli
9485c3e834 register gpiodev 
SVN-Revision: 15509
 2009-04-30 14:09:01 +00:00
Florian Fainelli
dd2b72105b fix redundant driver name printing in probe function 
SVN-Revision: 15254
 2009-04-19 13:32:54 +00:00
Florian Fainelli
1f334e3caa make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943) 
SVN-Revision: 15253
 2009-04-19 13:18:48 +00:00
Felix Fietkau
34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Florian Fainelli
4bd65101ad do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659) 
SVN-Revision: 15215
 2009-04-12 12:54:38 +00:00
Florian Fainelli
14832d3c23 some more fixes to the SPI controller driver 
SVN-Revision: 15146
 2009-04-08 08:52:57 +00:00
Florian Fainelli
5d5c8300b1 imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885) 
SVN-Revision: 15133
 2009-04-07 13:22:32 +00:00
Florian Fainelli
fb3fbea164 override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358 
SVN-Revision: 15020
 2009-03-24 15:22:07 +00:00
Hauke Mehrtens
f5dc2ce0aa refresh patches 
SVN-Revision: 15018
 2009-03-24 15:09:20 +00:00
Hauke Mehrtens
e82dce69a3 update to kernel version 2.6.27.21 
SVN-Revision: 15016
 2009-03-24 15:05:51 +00:00
Florian Fainelli
501ebb4f74 enable all blocks on 6338 and uart clock on 6345 
SVN-Revision: 14957
 2009-03-21 10:50:44 +00:00
Florian Fainelli
0972ee5331 add support for bcm6345 SoC, needs testing 
SVN-Revision: 14953
 2009-03-20 15:08:02 +00:00
Florian Fainelli
32c29f1aaf fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783) 
SVN-Revision: 14914
 2009-03-17 11:28:54 +00:00
Florian Fainelli
b865f9b722 add the CFE offset command line option to the imagetag utility, closes (#4366) 
SVN-Revision: 14896
 2009-03-16 12:29:11 +00:00
Florian Fainelli
6495fa36ea add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 
SVN-Revision: 14850
 2009-03-12 08:54:04 +00:00
Florian Fainelli
8065eb4a55 do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers 
SVN-Revision: 14848
 2009-03-11 10:32:44 +00:00
Florian Fainelli
51125fb616 make SPI work in full-duplex mode by default 
SVN-Revision: 14841
 2009-03-10 15:28:29 +00:00
Florian Fainelli
add058c382 include kmod-switch in the default images 
SVN-Revision: 14827
 2009-03-09 21:58:49 +00:00
Florian Fainelli
58a11bcb40 package the bcm63xx-spi driver 
SVN-Revision: 14794
 2009-03-08 19:21:55 +00:00
Florian Fainelli
ae1ed9b7f4 add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing 
SVN-Revision: 14793
 2009-03-08 15:27:46 +00:00
Florian Fainelli
871b0d6fed fix SPI accessors 
SVN-Revision: 14792
 2009-03-08 14:20:15 +00:00
Florian Fainelli
1bcf5d0de6 fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code 
SVN-Revision: 14790
 2009-03-08 12:43:13 +00:00
Florian Fainelli
bf7f2939c2 compile and register SPI controller device 
SVN-Revision: 14789
 2009-03-08 12:18:26 +00:00
Florian Fainelli
1e92d0355d make bcm6358 consistend with the other boards naming 
SVN-Revision: 14788
 2009-03-08 12:17:19 +00:00
Florian Fainelli
b1abddb45f fix some SPI register definitions and platform-device registration code 
SVN-Revision: 14787
 2009-03-08 12:13:52 +00:00
Florian Fainelli
5e8dfe53b6 prepare for SPI controller driver 
SVN-Revision: 14755
 2009-03-06 01:15:00 +00:00
Florian Fainelli
9422b140ba fix SPI register definitions 
SVN-Revision: 14754
 2009-03-06 01:13:10 +00:00
Florian Fainelli
2d1ed46c68 fix a bcm963xx-flash warning 
SVN-Revision: 14730
 2009-03-02 18:55:47 +00:00
Florian Fainelli
6f484fc283 provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__ 
SVN-Revision: 14683
 2009-02-27 15:48:23 +00:00
Florian Fainelli
b539d11497 move the device registration to an earlier initcall level, required for fallback SPROM to work 
SVN-Revision: 14681
 2009-02-27 15:18:34 +00:00
Felix Fietkau
11014b5cea disable all kernel config options that are set to =m 
SVN-Revision: 14611
 2009-02-22 04:44:24 +00:00
Hauke Mehrtens
3f085cd501 update to 2.6.28.7 and 2.6.27.19 
SVN-Revision: 14601
 2009-02-21 18:53:05 +00:00
Gabor Juhos
47665da430 update to 2.6.27.17 
SVN-Revision: 14513
 2009-02-15 07:47:12 +00:00
Florian Fainelli
eda8310293 always select kmod-ssb, pci is supported 
SVN-Revision: 14492
 2009-02-13 00:13:39 +00:00
Florian Fainelli
99203ed0b1 do not overried 802.1q and PHY kernel configuration symbols 
SVN-Revision: 14468
 2009-02-10 17:53:52 +00:00
Gabor Juhos
7f04c52b92 update to 2.6.27.15 
SVN-Revision: 14440
 2009-02-08 12:32:39 +00:00
Florian Fainelli
1fc20f18d4 resync kernel configuration 
SVN-Revision: 14395
 2009-02-03 19:59:01 +00:00
Florian Fainelli
730346e2d5 add support for user9102 boards (#4537) 
SVN-Revision: 14305
 2009-01-31 16:01:20 +00:00
Florian Fainelli
c2c0d74f67 generate images for old CFE based boards like the Davolink DV201 
SVN-Revision: 14264
 2009-01-29 14:56:45 +00:00
Florian Fainelli
d7cb033a04 Add board definitions for the Davolink DV201AMR 
SVN-Revision: 14263
 2009-01-29 14:54:13 +00:00
Gabor Juhos
2a0825b4d3 update to 2.6.27.13 
SVN-Revision: 14179
 2009-01-25 18:33:19 +00:00
Gabor Juhos
0c2e187f54 switch to 2.6.27.12 
SVN-Revision: 14157
 2009-01-23 13:30:27 +00:00
Florian Fainelli
46b91ed787 frequency is in Hz, thanks Joel 
SVN-Revision: 14067
 2009-01-17 15:29:36 +00:00
Florian Fainelli
5ce93c07a5 fix SPI register definitions 
SVN-Revision: 14048
 2009-01-15 22:53:32 +00:00
Florian Fainelli
5905a48169 allow bcm6338 to get the base address of the memory controller register, required to detect memory size 
SVN-Revision: 14047
 2009-01-15 22:42:22 +00:00
Gabor Juhos
3ca7f3bd6f update to 2.6.27.11 
SVN-Revision: 14043
 2009-01-15 13:40:35 +00:00
Florian Fainelli
4c7d2cf90e correct SPI register size 
SVN-Revision: 13886
 2009-01-06 14:49:27 +00:00
Andy Boyett
9f8c82da09 Add hostapd-mini to default images where applicable 
SVN-Revision: 13819
 2009-01-02 05:12:46 +00:00
Gabor Juhos
8395d01b59 update to 2.6.27.10 
SVN-Revision: 13695
 2008-12-19 19:25:35 +00:00
Florian Fainelli
85d59fbf8c add board registration of the bcm96338gw 
SVN-Revision: 13693
 2008-12-19 17:24:29 +00:00
Florian Fainelli
3f7137022d 6338 has no PCI 
SVN-Revision: 13692
 2008-12-19 17:08:11 +00:00
Florian Fainelli
3dd67d64f4 add experimental support for bcm6338 
SVN-Revision: 13691
 2008-12-19 17:05:09 +00:00
Florian Fainelli
fa5a568380 Register watchdog driver 
SVN-Revision: 13690
 2008-12-19 15:00:33 +00:00
Florian Fainelli
42ff43386a fix register definitions for bcm6358, thanks SGDA 
SVN-Revision: 13688
 2008-12-19 10:19:00 +00:00
Florian Fainelli
3ae3bf981e resync kernel configuration 
SVN-Revision: 13687
 2008-12-19 10:16:52 +00:00
Florian Fainelli
7ab973e1af Add bcm63xx_wdt but do not enable it yet 
SVN-Revision: 13677
 2008-12-17 14:06:03 +00:00
Gabor Juhos
e7336673b1 update to 2.6.27.9 and refresh patches 
SVN-Revision: 13659
 2008-12-16 10:37:14 +00:00
Florian Fainelli
562ff99c2c Build images for Inventel Livebox 
SVN-Revision: 13616
 2008-12-12 15:16:57 +00:00
Florian Fainelli
34867901d0 Resync kernel config 
SVN-Revision: 13607
 2008-12-11 23:16:54 +00:00
Florian Fainelli
4025c12a2d Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348) 
SVN-Revision: 13588
 2008-12-10 23:57:23 +00:00
Florian Fainelli
4dc65aed63 Add support for Sagem F@ST2404 (#4332) 
SVN-Revision: 13583
 2008-12-10 16:13:41 +00:00
Florian Fainelli
5dc3098a6c Disable CONFIG_NF_CT_ACCT 
SVN-Revision: 13577
 2008-12-10 01:39:29 +00:00
Florian Fainelli
6acf4c2a19 Fix remaining bug of the off-by-one error ;) 
SVN-Revision: 13551
 2008-12-08 21:00:00 +00:00
Florian Fainelli
fadddcc655 Enable ohci on bcm96348gw 
SVN-Revision: 13549
 2008-12-08 16:25:41 +00:00
Florian Fainelli
47050e72be Prepare bcm63xx for SPI master support 
SVN-Revision: 13547
 2008-12-08 14:14:37 +00:00
Florian Fainelli
f3be50a031 Add support for bcm96348gw10 (Netgear DG834GT) (#4319) 
SVN-Revision: 13540
 2008-12-07 20:34:48 +00:00
Gabor Juhos
4992a87aeb update to 2.6.27.8 and refresh patches 
SVN-Revision: 13528
 2008-12-06 09:59:55 +00:00
Gabor Juhos
919a8a9fe0 make mips_machine stuff available for other MIPS targets 
SVN-Revision: 13492
 2008-12-02 21:54:53 +00:00
Florian Fainelli
01a5c953a3 Fix an off-by one printing error 
SVN-Revision: 13469
 2008-12-02 14:11:54 +00:00
Florian Fainelli
043562037f resync kernel config 
SVN-Revision: 13433
 2008-11-29 16:33:07 +00:00
Florian Fainelli
e8aad7938a Improve Inventel Livebox support 
SVN-Revision: 13427
 2008-11-29 12:57:41 +00:00
Florian Fainelli
aa3c775b65 Reorder profiles numbering, broadcom being the most widely used 
SVN-Revision: 13401
 2008-11-28 16:35:10 +00:00
Florian Fainelli
cc2e43992d bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver 
SVN-Revision: 13379
 2008-11-27 20:40:03 +00:00
Florian Fainelli
bbad86e098 Add missing config symbol for SSB 
SVN-Revision: 13378
 2008-11-27 20:38:01 +00:00
Florian Fainelli
44108d6a2d Commit changes on the files for gpiolib 
SVN-Revision: 13374
 2008-11-27 10:38:36 +00:00
Florian Fainelli
36fc2d1f93 Convert brcm63xx to gpiolib 
SVN-Revision: 13373
 2008-11-27 10:38:01 +00:00
Florian Fainelli
1c77ec0587 Flatten brcm63xx patches, should make our life easier to patch files now ;) 
SVN-Revision: 13368
 2008-11-26 18:41:01 +00:00
Florian Fainelli
4fc7535fc7 Make 4-port LAN and 1 port wan configurations work 
SVN-Revision: 13362
 2008-11-26 15:51:55 +00:00
Imre Kaloz
752054346a update to 2.6.27.7 
SVN-Revision: 13347
 2008-11-25 13:54:46 +00:00
Imre Kaloz
a695fa76a4 move THERMAL symbols into the generic config 
SVN-Revision: 13346
 2008-11-25 13:52:25 +00:00
Florian Fainelli
0f26e35e37 brcm63xx has pcmcia support and is able to run b43 on its pci bus 
SVN-Revision: 13303
 2008-11-20 23:08:20 +00:00
Florian Fainelli
5acddecc68 Update brcm63xx broadcom profile now that b43 is available 
SVN-Revision: 13302
 2008-11-20 23:01:48 +00:00
Florian Fainelli
8f5351a4f2 Synchroniz bcm63xx kernel configuration 
SVN-Revision: 13300
 2008-11-20 22:16:48 +00:00
Florian Fainelli
e854a26332 Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail 
SVN-Revision: 13299
 2008-11-20 21:26:11 +00:00
Florian Fainelli
107aa04e06 Generate valid images for the bcm96348gw board 
SVN-Revision: 13298
 2008-11-20 21:22:45 +00:00
Imre Kaloz
722c78cd1e move some options to the generic 2.6.27 config 
SVN-Revision: 13264
 2008-11-17 17:28:12 +00:00
Imre Kaloz
7d09c0b086 update to 2.6.27.6 
SVN-Revision: 13261
 2008-11-17 17:22:30 +00:00
Florian Fainelli
0d4286b0b3 This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201) 
SVN-Revision: 13213
 2008-11-15 11:30:22 +00:00
Florian Fainelli
cb126cd576 Package bcm63xx-pcmcia kernel module and fix compilation 
SVN-Revision: 13212
 2008-11-15 11:26:23 +00:00
Florian Fainelli
9bbc37d26b Remove old kernel configuration files 
SVN-Revision: 13211
 2008-11-15 11:23:29 +00:00
Florian Fainelli
517e3d404c Delete old brcm63xx files 
SVN-Revision: 13210
 2008-11-15 11:21:42 +00:00
Gabor Juhos
88cda758c3 update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193 
SVN-Revision: 13192
 2008-11-12 17:49:01 +00:00
Nicolas Thill
0a11abc83d add missing kconfig symbols for 2.6.27 targets when all modules are enabled 
SVN-Revision: 13178
 2008-11-11 02:43:35 +00:00
Felix Fietkau
d0388bbe5c brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition 
SVN-Revision: 13130
 2008-11-06 12:52:39 +00:00
Florian Fainelli
7cedaafd0c Add basic support for Inventel Liveboxes, resync kernel config 
SVN-Revision: 13108
 2008-11-03 20:30:43 +00:00
Florian Fainelli
9aa1d64b91 Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken 
SVN-Revision: 13106
 2008-11-03 18:52:58 +00:00
Florian Fainelli
aa90a702db Use 2.6.27.4 kernel version 
SVN-Revision: 13055
 2008-10-28 11:19:24 +00:00
Florian Fainelli
30d2200e7d Update targets to 2.6.27.3 
SVN-Revision: 13035
 2008-10-23 09:11:10 +00:00
Florian Fainelli
28baca91fe Update patches and rename board 9 stands for development board 
SVN-Revision: 13024
 2008-10-22 09:20:51 +00:00
Florian Fainelli
691e187381 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices 
SVN-Revision: 13015
 2008-10-20 12:55:28 +00:00
Florian Fainelli
64c28032c8 New Broadcom BCM63xx codebase, huge thanks to Maxime ;) 
SVN-Revision: 13001
 2008-10-17 22:53:56 +00:00
Florian Fainelli
5718709711 Fix reference to the old and replaced kmod-rt61 
SVN-Revision: 12723
 2008-09-27 10:47:00 +00:00
Gabor Juhos
821170133f update to 2.6.26.5 and 2.6.25.17 
SVN-Revision: 12718
 2008-09-26 18:46:53 +00:00
Nicolas Thill
3029c2fd53 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported 
SVN-Revision: 12690
 2008-09-24 19:28:53 +00:00
Gabor Juhos
184c6b06f2 update to 2.6.26.3 and 2.6.25.16 
SVN-Revision: 12371
 2008-08-22 15:37:19 +00:00
Gabor Juhos
e5fa05d788 update to 2.6.25.15 and 2.6.26.2 
SVN-Revision: 12242
 2008-08-07 16:52:52 +00:00
Gabor Juhos
104b3386a2 update to 2.6.25.12 
SVN-Revision: 11933
 2008-07-26 10:53:23 +00:00
Imre Kaloz
492ba57b56 update targets to 2.6.25.10 
SVN-Revision: 11667
 2008-07-05 16:52:15 +00:00
Imre Kaloz
dee39d10ee upgrade to 2.6.25.9 
SVN-Revision: 11584
 2008-06-26 14:28:16 +00:00
Gabor Juhos
4af6ac74fb upgrade to 2.6.25.7, and refresh patches 
SVN-Revision: 11523
 2008-06-17 12:57:04 +00:00
Imre Kaloz
2eb6751084 upgrade to 2.6.25.6 
SVN-Revision: 11435
 2008-06-11 11:38:39 +00:00
Florian Fainelli
6e0427c8a4 Add bcm3350 cpuid 
SVN-Revision: 11364
 2008-06-05 16:19:46 +00:00
Gabor Juhos
c2619fb5ab revert kernel version to 2.6.25.4 
SVN-Revision: 11273
 2008-05-27 06:27:16 +00:00
Gabor Juhos
ac897ce5b1 refresh kernel patches 
SVN-Revision: 11201
 2008-05-19 08:33:22 +00:00
Gabor Juhos
f9719b35c8 upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19) 
SVN-Revision: 11184
 2008-05-18 20:12:54 +00:00
Felix Fietkau
12da51bb3c bcm96345: correct some 6345 specific stuff 
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11183
 2008-05-18 17:32:16 +00:00
Felix Fietkau
ab2b78aabd bcm963xx: fix cfe detection 
The CFE detection failed to account for zero termination.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11182
 2008-05-18 17:32:05 +00:00
Felix Fietkau
be49888f6c bcm963xx: add new timer code 
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11181
 2008-05-18 17:31:55 +00:00
Felix Fietkau
f92e4aaf53 bcm963xx: remove obsolete timer code 
This removes some code that has been deprecated in kernels >= 2.6.24.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11180
 2008-05-18 17:31:45 +00:00
Felix Fietkau
4db60563fc bcm963xx: fix uart isr 
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11179
 2008-05-18 17:31:35 +00:00
Felix Fietkau
ca851edf10 bcm963xx: rewrite irq handling code 
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11178
 2008-05-18 17:31:25 +00:00
Felix Fietkau
289c41604f bcm963xx: add missing trailing zero to load address 
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11177
 2008-05-18 17:31:11 +00:00
Felix Fietkau
17d20bb016 bcm963xx: flashmap support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11176
 2008-05-18 17:31:02 +00:00
Felix Fietkau
da18b98cff bcm963xx: serial port support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11175
 2008-05-18 17:30:49 +00:00
Felix Fietkau
97b85443eb bcm963xx: board support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11174
 2008-05-18 17:30:39 +00:00
Felix Fietkau
f94d5eafc9 bcm963xx: add 2.6.25 configuration file 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11173
 2008-05-18 17:30:30 +00:00
Felix Fietkau
8e7ff7a673 bcm963xx: use the 2.6.25.1 kernel 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11172
 2008-05-18 17:30:16 +00:00
Felix Fietkau
2dfabe3991 bcm963xx: image generation using image tagger 
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11171
 2008-05-18 17:30:04 +00:00
Felix Fietkau
46b4413fbb bcm963xx: fix load address / kernel entry 
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11169
 2008-05-18 17:29:39 +00:00
Nicolas Thill
e3a42b23c6 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate 
SVN-Revision: 11097
 2008-05-09 17:08:51 +00:00
Imre Kaloz
68943e35c2 upgrade to 2.6.24.5 
SVN-Revision: 10959
 2008-04-28 10:23:36 +00:00
Nicolas Thill
c6fe45ed55 properly disable CONFIG_CRYPTO_HW 
SVN-Revision: 10952
 2008-04-27 12:31:50 +00:00
Florian Fainelli
03f917f26c Delete config-default file and resync kernel configuration for brcm63xx 
SVN-Revision: 10790
 2008-04-11 14:22:41 +00:00
Florian Fainelli
62240465c4 brcm63xx image generation cleanups (#3169) 
SVN-Revision: 10703
 2008-04-01 21:10:47 +00:00
Florian Fainelli
ebf4eb11e9 Upgrade brcm63xx to 2.6.24 
SVN-Revision: 10455
 2008-02-13 17:31:17 +00:00
Gabor Juhos
0a72d14e40 resync kernel config 
SVN-Revision: 10444
 2008-02-11 15:28:45 +00:00
Imre Kaloz
3a0e58b2e1 upgrade & standardize kernel versions 
SVN-Revision: 10443
 2008-02-11 10:50:40 +00:00
Felix Fietkau
3f7af01bb0 fix initramfs 
SVN-Revision: 10080
 2008-01-01 21:38:06 +00:00
Felix Fietkau
1bca0cc517 make the image filenames a bit shorter 
SVN-Revision: 9533
 2007-11-10 23:08:11 +00:00
Nicolas Thill
5f0272d618 move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs. 
SVN-Revision: 8980
 2007-09-23 15:12:12 +00:00
Nicolas Thill
fec4d9ee3c add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP (closes: #2297, thanks to aorlinsk), sync 2.4 / 2.6 kconfigs. 
SVN-Revision: 8955
 2007-09-22 18:37:24 +00:00
Felix Fietkau
236d7e62ca clean up jffs2 config options 
SVN-Revision: 8848
 2007-09-19 20:58:16 +00:00
Felix Fietkau
87a88cebc7 adapt profiles for subtarget changes 
SVN-Revision: 8695
 2007-09-08 20:04:43 +00:00
Felix Fietkau
a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
SVN-Revision: 8694
 2007-09-08 19:55:42 +00:00
Felix Fietkau
56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
SVN-Revision: 8653
 2007-09-06 16:27:37 +00:00