Mirko Vogt
ec19a23bae
fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W
...
SVN-Revision: 35501
2013-02-05 14:57:43 +00:00
Mirko Vogt
f460388ce2
add support for board named RTA770W
...
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference
SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
Jonas Gorski
8506964e6d
bcm63xx: add support for linux 3.8
...
Based on 3.8-rc6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35482
2013-02-04 10:19:55 +00:00
Jonas Gorski
3b4fced67d
bcm63xx: add support for linux 3.7
...
Based on 3.7.6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35481
2013-02-04 10:19:50 +00:00
Jonas Gorski
a15e1a950d
bcm63xx: refresh 3.6 patches
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35477
2013-02-04 10:19:24 +00:00
Jonas Gorski
ce8b226046
bcm63xx: replace kmod-switch with swconfig in default package set
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
Jonas Gorski
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski
17d51121a6
bcm63xx: expose the internal switch to b53
...
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski
3e998d9cf9
bcm63xx: move bcm63xx-spi into the kernel
...
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Jo-Philipp Wich
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Jonas Gorski
e952eaa112
bcm63xx: Add Huawei HG556a support
...
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
Jonas Gorski
0e58173fa5
bcm63xx: Fix caldata partition mtd patch
...
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
Jonas Gorski
10fc07daac
bcm63xx: remove 3.3 support
...
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
Mirko Vogt
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Florian Fainelli
d9d0814fc2
Fix Comtrend AR-5381u Power LED
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
Gabor Juhos
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Florian Fainelli
0588d13a3e
Fix typo in 96338GW power LED.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
Jonas Gorski
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
Jonas Gorski
746b4cec06
bcm63xx: Enable LED pin support for ath9k pci fixup.
...
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
Jonas Gorski
1baeede939
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
Jonas Gorski
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
Imre Kaloz
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
Gabor Juhos
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
Jonas Gorski
306894b88f
bcm63xx: switch to 3.6.6
...
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
Jonas Gorski
c54fa281b1
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
Jonas Gorski
15519bec9c
bcm63xx: add two missing usb patches to 3.6
...
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
Jonas Gorski
06ad6ffe16
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
Jonas Gorski
f2bb7754f5
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
Jonas Gorski
a50d121d8e
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
Jonas Gorski
5bc7d81a20
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
Gabor Juhos
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Florian Fainelli
9af90aa80c
add missing 6345 clock bits patch to 3.6 patches
...
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
Florian Fainelli
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
Florian Fainelli
dea2da55df
fix Ethernet DMA for 636x and 6328 after r33916
...
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
Florian Fainelli
917670922b
add support for the Dynalink RTA770BW board
...
This board id is used by the Siemens Gigaset SE515 router.
SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
Florian Fainelli
bdfcbb8bee
make BCM6345 Ethernet DMA changes runtime checks
...
The semantics of the DMA engine are identical, we just have a couple of
special case handling.
SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
Jonas Gorski
0cc4bed41c
add support for Comtrend AR5381u.
...
Router: Comtrend AR5381u.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
Jonas Gorski
d73871fb18
add support for Comtrend AR5387un.
...
Router: Comtrend AR5387un.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
Jonas Gorski
e93725a743
add support for HomeStation ADB P.DG A4001N.
...
Router: HomeStation ADB P.DG A4001N.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
Florian Fainelli
61686a1514
add back support for BCM6345 Ethernet DMA engine
...
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00
Florian Fainelli
eeed82c04e
fix clocks bits for BCM6345
...
SVN-Revision: 33888
2012-10-22 12:57:14 +00:00
Jonas Gorski
e6171dfb2c
Add F@ST2604 board support.
...
Add Sagem F@ST2604 board support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
Jonas Gorski
fbe0af3237
bcm63xx: remove bcm_tag usage in kernel
...
Fixes #12292 .
SVN-Revision: 33670
2012-10-09 08:08:49 +00:00
Jonas Gorski
6a000ba37a
bcm63xx: fix 963281TAN image names
...
it's a 6328, not a 6348.
SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
Jonas Gorski
997ace7e5e
firmware-utils: move bcm_tag.h here
...
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
Jonas Gorski
f16ea6be3f
bcm63xx: fix entering failsafe through button
...
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.
SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
Florian Fainelli
caf900f0e4
remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
Jonas Gorski
7708138183
bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
...
Fixes booting the device with button hotplug enabled (#10785 ).
SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
Florian Fainelli
f164b71189
leds: do not register device if no leds defined
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli
f0f10014a0
BCM6358 fix enet MII clk definitions
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli
9b91c62917
nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Jonas Gorski
4feeda756e
bcm63xx: fix USB base registers and IRQs for BCM6328
...
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Jonas Gorski
07c4524d33
bcm63xx: Add nb6 support (BCM6362 SoC base boards)
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]
SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029
bcm63xx: add basic bcm6362 support
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d
bcm63xx: enable usb for bcm6328
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851
bcm63xx: update enetswitch driver
...
Update enetswith driver with latest fixes and additions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a
bcm63xx: reorder patches
...
Fix the order and names of patches.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli
a4d699ccf0
fix DVA-G3810BN image generation
...
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3
add D-link DVA-G3810BN-TL-1 support
...
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2
Add CT6376-1 board support
...
Added CT6373 devices instead of using NB4's devices, as Florian suggested.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli
4acdbb1d87
Add brcmsmac profile
...
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
Florian Fainelli
b94d9eb302
remove bcm63xx_pci_register() call in livebox board
...
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
Florian Fainelli
f8446c3d4c
use physmap-flash on livebox ( #8677 )
...
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
Florian Fainelli
bb1488e5e7
Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
Jonas Gorski
0a3e9c3148
bcm63xx: bcm63xx-spi does not depend on spi-bitbang
...
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
Jonas Gorski
fad888a85c
bcm63xx: 96348A-122 improvements (Comtrend 5365)
...
1) Improve WLAN button.
2) Add 96348A-122 image.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
Jonas Gorski
0c7e676342
bcm63xx: fix second caldata address calculation
...
thanks Noltari for spotting this.
SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
Jonas Gorski
988147111c
bcm63xx: update patches to latest upstream versions
...
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
Florian Fainelli
4cdc4b1f36
refresh patches
...
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
Florian Fainelli
52bae2d2bd
fix watchdog and rng drivers section mismatch ( #11767 )
...
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
Florian Fainelli
1d7878a38b
fix SPI clock frequency selection
...
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
Florian Fainelli
b89c81929e
fix SPI message control handling for BCM6338/6348
...
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.
SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
Jonas Gorski
f2271efc4e
bcm63xx: readd accidentially dropped ignore_oc in ehci driver
...
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.
SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
Florian Fainelli
6e5242952c
fix 553-board_96348w3.patch patch wrt gpio-keys-polled
...
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
Florian Fainelli
4c25e42fa8
fix alarm led color for board 96348A-122
...
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
Florian Fainelli
2f63f097de
add 96348w3 board ( #10764 )
...
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
Florian Fainelli
9d38989d1f
update livebox board support ( #8677 )
...
Merge most fixes from #8677 :
- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses
Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c
SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
Florian Fainelli
c69a2cdfbb
fix leds naming for all bcm63xx boards
...
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
Florian Fainelli
23fc737b9d
backport upstream spi-bcm63xx fixes
...
* message pump conversion
* not using stopping state
* setting spi driver mode bits
SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
Florian Fainelli
4112094dbb
increase led number in patch 301-led_count.patch
...
So that board patches are only touching board-related code
SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
Florian Fainelli
9a61b249c5
fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
Florian Fainelli
36c99bcc42
fix bisectability of patch 303-spi-board-info.patch
...
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.
SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
John Crispin
a4d96aae8d
bump to 3.3.8
...
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Jonas Gorski
ffea8eb913
bcm63xx: fix ethernet on 96328avng and 963281TAN
...
The internal switch did not get registered.
SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
Jonas Gorski
3fc76fb781
bcm63xx: build images for 6328 reference boards with various flash sizes
...
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.
Known issues:
* Button setup unknown, thus no fail-safe available.
* All other BCM6328 and BCM63XX issues
SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski
c454ba3657
bcm63xx: readd accidentially dropped network config for SPW303V
...
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
Jonas Gorski
ec7786c2ec
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9
bcm63xx: add ath9k to atheros wifi profile
...
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335
bcm63xx: add support for DSL-274XB rev F1
...
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1
bcm63xx: add a fixup for ath9k devices
...
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06
bcm63xx: add preliminary support for bcm6328
...
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88
bcm63xx: add flash type detection
...
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44
bcm63xx: add a default switch configuration for DSL-274XB
...
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa
bcm63xx: setup network config through uci-defaults
...
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Gabor Juhos
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Jonas Gorski
b218b15709
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
...
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384 .
SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
Florian Fainelli
5d9b44d110
use a define for the poll and debounce interval
...
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
Gabor Juhos
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Florian Fainelli
e047cf1899
switch to gpio-keys-polled
...
SVN-Revision: 31491
2012-04-27 16:44:48 +00:00
Jonas Gorski
8a38c62c07
bcm63xx: drop linux 3.2 support
...
SVN-Revision: 31464
2012-04-24 11:49:27 +00:00
Jonas Gorski
77219290e1
bcm63xx: drop linux 3.0 support
...
SVN-Revision: 31463
2012-04-24 11:49:24 +00:00
Jonas Gorski
49de6c1714
bcm63xx: switch kernel to 3.3
...
SVN-Revision: 31462
2012-04-24 11:49:19 +00:00
Jonas Gorski
f7df1eafc4
bcm63xx: enable bcm6368 for linux 3.3 and build images
...
Only build bcm6368 images when building for linux 3.3.
SVN-Revision: 31133
2012-03-28 20:42:37 +00:00
Jonas Gorski
c7ae2fccb6
bcm63xx: add initial support for bcm6368 boards
...
SVN-Revision: 31132
2012-03-28 20:42:34 +00:00
Jonas Gorski
68f268a5eb
bcm63xx: add driver for the internal hw trng on bcm6368
...
SVN-Revision: 31131
2012-03-28 20:42:30 +00:00
Jonas Gorski
78fb818f7c
bcm63xx: replace SPI driver with latest upstream version
...
SVN-Revision: 31130
2012-03-28 20:42:25 +00:00
Jonas Gorski
a2adca6ee9
bcm63xx: add ethernet support for bcm6368
...
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.
Also drop the ethernet patch for bcm6345 for now, it needs rework.
SVN-Revision: 31129
2012-03-28 20:42:20 +00:00
Jonas Gorski
0876972850
bcm63xx: add missing bits from extirq support
...
Add missing external IRQ code parts for older chips in the new code.
SVN-Revision: 31128
2012-03-28 20:42:15 +00:00
Jonas Gorski
44d546290a
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
SVN-Revision: 31127
2012-03-28 20:42:09 +00:00
Felix Fietkau
db6e326c56
targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
...
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Florian Fainelli
07486c4d96
remove udc patch since it is unused
...
SVN-Revision: 30920
2012-03-13 14:06:44 +00:00
Florian Fainelli
1029786936
remove 3.1 support
...
SVN-Revision: 30823
2012-03-05 16:50:42 +00:00
Florian Fainelli
75b5f4a6b4
rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic
...
SVN-Revision: 30822
2012-03-05 14:49:34 +00:00
Florian Fainelli
c327915156
generate generic images for BCM96358VW and BCM96358VW2 ( #10666 )
...
SVN-Revision: 30821
2012-03-05 14:49:31 +00:00
Florian Fainelli
ca1e59660e
wire bcm96348gw-10 reset button ( #10854 )
...
SVN-Revision: 30820
2012-03-05 14:23:45 +00:00
Florian Fainelli
631a035a76
Merge branch 'bcm63xx'
...
SVN-Revision: 30819
2012-03-05 13:29:54 +00:00
Jonas Gorski
778e5d4fa5
brcm63xx: add support for linux 3.3
...
SVN-Revision: 30027
2012-02-04 10:17:27 +00:00
Jonas Gorski
e67f4477bb
kernel: update linux 3.0 to 3.0.18
...
SVN-Revision: 29965
2012-01-31 09:43:53 +00:00
Florian Fainelli
882eddbf92
build 96348R images
...
SVN-Revision: 29960
2012-01-30 21:12:32 +00:00
Florian Fainelli
0700644b16
remove support for 2.6.39
...
SVN-Revision: 29959
2012-01-30 21:12:28 +00:00
Florian Fainelli
038fc8eac3
bump to 3.0.17
...
SVN-Revision: 29958
2012-01-30 21:12:25 +00:00
Jonas Gorski
3883e71097
brcm63xx: add support for linux 3.2
...
SVN-Revision: 29731
2012-01-13 14:59:50 +00:00
Jonas Gorski
c560444a58
kernel: update linux 3.1 to 3.1.9
...
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
Jonas Gorski
e49d3e1d5b
kernel: update linux 3.0 to 3.0.17
...
SVN-Revision: 29725
2012-01-13 14:10:44 +00:00
Daniel Dickinson
034b7f0ef5
Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
...
SVN-Revision: 29712
2012-01-11 13:47:48 +00:00
Florian Fainelli
718907b661
don't package gpioctl by default
...
SVN-Revision: 29288
2011-11-21 16:36:39 +00:00
Jo-Philipp Wich
b5739aabd9
fix D-Link DSL-2650U image generation
...
SVN-Revision: 29266
2011-11-19 21:34:51 +00:00
Jonas Gorski
8bac0df4ae
linux: update 3.0 to 3.0.9
...
SVN-Revision: 29264
2011-11-19 18:39:12 +00:00
Florian Fainelli
ae90aa4efd
build images for D-Link DSL-2650U ( #9003 )
...
SVN-Revision: 29238
2011-11-18 10:37:03 +00:00
Florian Fainelli
7f787707de
build images for Pirelli A226M ( #10409 )
...
SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
Florian Fainelli
5dc2098448
register uart0 on DWV-S0 boards ( #10409 )
...
SVN-Revision: 29044
2011-11-13 19:19:18 +00:00
Florian Fainelli
717a4391d7
rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
SVN-Revision: 29041
2011-11-13 19:19:05 +00:00
Jonas Gorski
d8acb75009
linux: update 3.1 to 3.1.1
...
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
Jo-Philipp Wich
a9e64493d8
target: globally disable BSD process accounting
...
SVN-Revision: 28584
2011-10-25 16:18:36 +00:00
Hauke Mehrtens
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
Florian Fainelli
b59ab7d13b
fix ehci build on 3.0+
...
SVN-Revision: 27946
2011-08-10 11:37:25 +00:00
Florian Fainelli
0e40c19b45
add ignore_oc in struct ehci_hcd
...
SVN-Revision: 27945
2011-08-10 11:37:21 +00:00
Jonas Gorski
6b5f483efa
bcm63xx: add support for linux 3.1-rc1
...
SVN-Revision: 27941
2011-08-09 12:19:49 +00:00
Florian Fainelli
c37a9544bf
add support for BCM6345 Ethernet DMA engine
...
SVN-Revision: 27881
2011-08-02 18:55:55 +00:00
Florian Fainelli
11c4128770
improve BCM6345 support
...
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control
SVN-Revision: 27880
2011-08-02 18:55:46 +00:00
Jonas Gorski
4e6c93bef1
bcm63xx: Fix SPI commands and register offsets for BCM6348
...
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.
Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>
SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
Florian Fainelli
9c7294f7c7
add ehci support to DWV-S0 board ( #9059 )
...
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
Florian Fainelli
930485561c
fix GEN_SPI_RSET_BASE macro ( #9697 )
...
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
Florian Fainelli
00ad56b73e
move board_HW553 inside the ifdef ..BCM6358 .. endif block
...
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
Daniel Dickinson
1141165bb9
Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
...
SVN-Revision: 27471
2011-07-06 06:35:24 +00:00
Daniel Dickinson
9dc72505a2
profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
...
SVN-Revision: 27470
2011-07-06 06:35:22 +00:00
Florian Fainelli
7c3bbe150a
hw553: fix missing has_uart0 in board definition ( #9533 )
...
SVN-Revision: 27448
2011-07-04 15:04:58 +00:00
Hauke Mehrtens
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
Hauke Mehrtens
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
Florian Fainelli
3f40c0f7df
remove gpiodev, prefer sysfs gpio
...
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
Florian Fainelli
f6e4eb15bc
register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
Florian Fainelli
5a76c6bdd7
fix tab damage in 141-led_count.patch
...
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
Florian Fainelli
3f0f8d9c87
fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
Florian Fainelli
9bdf6abb9d
use macros to generate SPI registers table and switches
...
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
Florian Fainelli
ab74628c10
dev-spi.c checks for running CPU, not board code
...
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
Florian Fainelli
4dd4cbeb43
fixup patches after r27234
...
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
Florian Fainelli
7819b530da
remove accidental bcm6345 related patches
...
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
Florian Fainelli
12db3df666
remove support for 2.6.37 and 2.6.38
...
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
Florian Fainelli
6bb0a608dc
switch to 2.6.39
...
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
Florian Fainelli
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
Florian Fainelli
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
Florian Fainelli
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
Florian Fainelli
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
Florian Fainelli
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
Florian Fainelli
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
Florian Fainelli
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
Florian Fainelli
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
Florian Fainelli
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
Florian Fainelli
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
Florian Fainelli
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
Florian Fainelli
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
Florian Fainelli
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
Florian Fainelli
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
Hauke Mehrtens
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
Hauke Mehrtens
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
Felix Fietkau
1fcd26091b
brcm63xx: remove patches/configs for 2.6.35
...
SVN-Revision: 26709
2011-04-17 18:39:46 +00:00
Daniel Dickinson
8b18ce6807
Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
SVN-Revision: 26699
2011-04-17 01:15:47 +00:00
Daniel Dickinson
0d722113b9
Generate images for RTA1320_16M-based routers
...
SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
Daniel Dickinson
f83c5938d2
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
Hauke Mehrtens
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
Daniel Dickinson
33b864e899
Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
...
SVN-Revision: 26387
2011-03-31 06:16:23 +00:00
Florian Fainelli
aa580d336b
bcm63xx: Really fix the flash driver in 2.6.37
...
Read back the actual rootfs length from the image tag.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25938
2011-03-07 16:55:01 +00:00
Florian Fainelli
9dd1454044
fix patches after 2.6.37 update, patch from KanjiMonster
...
SVN-Revision: 25810
2011-03-01 16:02:38 +00:00
Florian Fainelli
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
2011-02-20 19:59:22 +00:00
Florian Fainelli
8cc16aa14e
add support for HW553 bcm6358-based boards ( #8844 )
...
SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
Florian Fainelli
b7f8e1276d
add support for 'MAGIC' bcm6348-based board
...
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.
I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )
Thanks to KanjiMonster for the support on the IRC channel.
Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>
SVN-Revision: 25584
2011-02-19 12:44:27 +00:00
Florian Fainelli
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
Florian Fainelli
2d3ed6dc2d
fix T-Com Speedport W 500V default config
...
The device is called SPW500V, not SP500W.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25431
2011-02-09 13:09:02 +00:00
Florian Fainelli
e75274de89
fix build of brcm-wl
...
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25420
2011-02-08 13:46:12 +00:00
Florian Fainelli
bed53c93d6
give some credits to Tanguy Bouzeloc in the spi driver
...
SVN-Revision: 25133
2011-01-27 02:11:08 +00:00
Florian Fainelli
c6d9ec5173
multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 24849
2010-12-29 16:19:59 +00:00
Daniel Dickinson
dc9c1ac1f7
patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
SVN-Revision: 24843
2010-12-28 08:10:32 +00:00
Daniel Dickinson
5ee2a6c696
patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
SVN-Revision: 24842
2010-12-28 04:05:04 +00:00
Florian Fainelli
093ebfe217
spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 24840
2010-12-28 00:24:50 +00:00
Daniel Dickinson
fc3a1d0ba3
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
Daniel Dickinson
6ee5411686
base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24836
2010-12-26 04:18:04 +00:00
Daniel Dickinson
31f7259e3e
mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24834
2010-12-26 04:17:56 +00:00
Daniel Dickinson
44e22cbd49
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.
...
SVN-Revision: 24442
2010-12-10 18:59:58 +00:00
Daniel Dickinson
7224337d71
Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed.
...
SVN-Revision: 24316
2010-12-08 00:40:31 +00:00
Daniel Dickinson
2a86dcc3d6
Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases.
...
SVN-Revision: 24315
2010-12-08 00:40:28 +00:00
Daniel Dickinson
c6ef9a0720
Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
...
SVN-Revision: 24314
2010-12-08 00:40:24 +00:00
Daniel Dickinson
f8ed133c0a
patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
...
SVN-Revision: 24310
2010-12-07 17:32:29 +00:00
Daniel Dickinson
0e839ea40d
Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
...
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.
It belongs in generic not brcm63xx.
SVN-Revision: 24308
2010-12-07 17:02:31 +00:00
Daniel Dickinson
183d628485
patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise
...
SVN-Revision: 24307
2010-12-07 16:42:23 +00:00
Daniel Dickinson
8f9b14dafe
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
SVN-Revision: 24305
2010-12-07 15:15:54 +00:00
Daniel Dickinson
3baa168e09
patches: Refreshed patches after led_count
...
SVN-Revision: 24304
2010-12-07 15:15:51 +00:00
Daniel Dickinson
b963cbde33
board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
...
SVN-Revision: 24303
2010-12-07 15:15:47 +00:00
Daniel Dickinson
e5ca4d81f4
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
SVN-Revision: 24302
2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35
base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
...
SVN-Revision: 24276
2010-12-06 06:46:03 +00:00
Daniel Dickinson
244db5ac6a
board definition: Fixed CPVA642 LED definitions
...
SVN-Revision: 24275
2010-12-06 06:45:57 +00:00
Daniel Dickinson
8316194016
board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
SVN-Revision: 24274
2010-12-06 04:31:23 +00:00
Daniel Dickinson
7129521696
base-files: Added network defconfig because board only has one ethernet (4-port switch)
...
SVN-Revision: 24273
2010-12-06 02:01:08 +00:00
Daniel Dickinson
9677b65cb6
image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
...
SVN-Revision: 24191
2010-11-28 22:13:00 +00:00
Daniel Dickinson
314bce63e6
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24190
2010-11-28 22:04:44 +00:00
Daniel Dickinson
3a49f669f2
bcm63xx: Add board id override fixup.
...
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24189
2010-11-28 22:04:40 +00:00
Daniel Dickinson
c51d772e62
bcm63xx: Finalize support for DSL-274xB, rev C2.
...
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24188
2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c
bcm63xx: Allow 'colored' power leds.
...
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24187
2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
...
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24186
2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a
bcm63xx: Add defconfigs.
...
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24185
2010-11-28 22:04:19 +00:00
Imre Kaloz
ead8ab8403
update to the latest stable kernels
...
SVN-Revision: 24136
2010-11-24 18:50:11 +00:00
Daniel Dickinson
195d1d7446
image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
...
SVN-Revision: 24127
2010-11-24 11:06:13 +00:00
Daniel Dickinson
0c0c1f017f
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
...
SVN-Revision: 24118
2010-11-23 20:17:08 +00:00
Daniel Dickinson
049e59a27b
Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
...
SVN-Revision: 24040
2010-11-19 13:41:54 +00:00
Daniel Dickinson
eadb5c84fa
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
...
SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
Claudio Mignanti
7583fe8668
Add wps button on alice gate
...
SVN-Revision: 23903
2010-11-06 21:08:44 +00:00
Imre Kaloz
0a5da348d1
update kernels to 2.6.32.25 and 2.6.35.8
...
SVN-Revision: 23851
2010-11-04 09:01:08 +00:00
Florian Fainelli
ffc84cf75c
register uart driver on livebox ( #8013 )
...
SVN-Revision: 23653
2010-10-27 10:02:13 +00:00
Florian Fainelli
7bf5647070
refresh 2.6.35 patches
...
SVN-Revision: 23652
2010-10-27 10:02:08 +00:00
Claudio Mignanti
697d3e7066
Fix nxp_74hc164 driver compile error (builbot)
...
SVN-Revision: 23623
2010-10-24 16:10:41 +00:00
Florian Fainelli
20d28f7685
fix platform_devices registration
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 23517
2010-10-18 19:49:54 +00:00
Florian Fainelli
af0e5167bc
add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 )
...
SVN-Revision: 23508
2010-10-17 17:45:50 +00:00
Florian Fainelli
9d9e3fed62
remove 2.6.32 support
...
SVN-Revision: 23505
2010-10-17 16:32:35 +00:00
Florian Fainelli
a1ea84dbb6
fix SPI driver, move register out of driver code
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com
SVN-Revision: 23504
2010-10-17 14:09:30 +00:00
Florian Fainelli
1a13c39f76
restore kernel oldconfig
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23503
2010-10-17 14:09:24 +00:00
Florian Fainelli
265bf2ccb0
refresh patches
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23502
2010-10-17 14:09:04 +00:00
Florian Fainelli
9f4c51acb7
refresh nb4 support. Register 74x164 device
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23501
2010-10-17 14:08:57 +00:00
Florian Fainelli
8cbd9d5a2e
add spi devices board info int bcm63xx_boards
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23500
2010-10-17 14:08:51 +00:00
Florian Fainelli
b65e494976
add 74x164 SPI chip support
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23499
2010-10-17 14:08:45 +00:00
Florian Fainelli
cd9b90235c
backport SPI master with no RXTX support (from 2.6.36)
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23498
2010-10-17 14:08:39 +00:00
Florian Fainelli
d5854cfd4d
register earlier extended platform devices
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23497
2010-10-17 14:08:34 +00:00
Lars-Peter Clausen
83d6a36019
update 2.6.35.x to 2.6.35.7
...
SVN-Revision: 23213
2010-10-04 07:42:32 +00:00
Florian Fainelli
bbca651e1b
remove wpa-supplicant and iw from the Tecom GW6x00 profile
...
SVN-Revision: 23051
2010-09-13 08:30:35 +00:00
Florian Fainelli
d3e206ad96
default to using 2.6.35
...
SVN-Revision: 23038
2010-09-12 21:23:53 +00:00
Florian Fainelli
dc1302fdf9
remove 2.6.33 support
...
SVN-Revision: 23037
2010-09-12 21:23:47 +00:00
Florian Fainelli
327ac42dca
change the Tecom GW6x00 profile to use wl instead of b43
...
SVN-Revision: 23036
2010-09-12 21:23:41 +00:00
Florian Fainelli
f4f789f211
register udc and spi devices at the correct init level
...
SVN-Revision: 23035
2010-09-12 21:23:35 +00:00
Florian Fainelli
fab2e77357
refresh 2.6.35 patches
...
SVN-Revision: 23034
2010-09-12 21:23:29 +00:00
Jo-Philipp Wich
867ac59ff9
enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
...
SVN-Revision: 22846
2010-08-30 22:59:20 +00:00
Florian Fainelli
2e343d9760
add 2.6.35 support
...
SVN-Revision: 22800
2010-08-25 19:56:08 +00:00
Florian Fainelli
b1becffa5b
update to 2.6.32.20
...
SVN-Revision: 22766
2010-08-22 17:07:37 +00:00
Daniel Dickinson
a5fdf57a1b
base-files: diag.sh: For power button as preinit status led, end with led left on, not off
...
SVN-Revision: 22466
2010-08-02 19:33:08 +00:00
Daniel Dickinson
d391ca2c8c
base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
...
SVN-Revision: 22465
2010-08-02 19:32:59 +00:00
Daniel Dickinson
99d0f9ea05
patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32
...
SVN-Revision: 22464
2010-08-02 19:32:40 +00:00
Jo-Philipp Wich
00cc52f14b
reorder profiles
...
SVN-Revision: 22390
2010-07-26 18:58:35 +00:00
Jo-Philipp Wich
7831006360
fix a typo in 040-bcm963xx_flashmap.patch
...
SVN-Revision: 22386
2010-07-25 00:10:37 +00:00
Imre Kaloz
ca8f45b142
update kernel versions
...
SVN-Revision: 22289
2010-07-19 11:34:03 +00:00
Florian Fainelli
f6935a4bdb
fix alice gate2 internet:green led ( #6743 )
...
SVN-Revision: 22273
2010-07-18 10:29:44 +00:00
Jo-Philipp Wich
abdf25b045
add required exports for wl.ko
...
SVN-Revision: 22174
2010-07-13 17:03:56 +00:00
Claudio Mignanti
2d86ea7bf3
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
...
SVN-Revision: 22145
2010-07-12 14:06:13 +00:00
Jo-Philipp Wich
1650f33f97
add a wifi profile for proprietary wl
...
SVN-Revision: 22009
2010-07-01 01:39:04 +00:00
Florian Fainelli
fb94196462
add missing alice gate2 leds ( #6743 )
...
SVN-Revision: 21785
2010-06-13 12:20:53 +00:00
Florian Fainelli
145fd381d7
do not override cfg80211-related config symbols
...
SVN-Revision: 21769
2010-06-12 18:10:16 +00:00
Gabor Juhos
9bc1e548a1
generic: move more common options to generic configuration
...
* CONFIG_ABX500_CORE
* CONFIG_ATOMIC64_SELFTEST
* CONFIG_BRIDGE_IGMP_SNOOPING
* CONFIG_CAIF
* CONFIG_CEPH_FS
* CONFIG_CRYSTALHD
* CONFIG_DEFAULT_SECURITY_SELINUX
* CONFIG_DEFAULT_SECURITY_SMACK
* CONFIG_DEFAULT_SECURITY_TOMOYO
* CONFIG_DT3155
* CONFIG_IP_MROUTE_MULTIPLE_TABLES
* CONFIG_L2TP
* CONFIG_LOGFS
* CONFIG_LPC_SCH
* CONFIG_MFD_JANZ_CMODIO
* CONFIG_MFD_RDC321X
* CONFIG_N_GSM
* CONFIG_RAMOOPS
* CONFIG_SERIAL_ALTERA_JTAGUART
* CONFIG_SERIAL_ALTERA_UART
* CONFIG_SERIAL_TIMBERDALE
* CONFIG_SM_FTL
* CONFIG_SQUASHFS_XATTRS
SVN-Revision: 21750
2010-06-10 10:45:51 +00:00
Gabor Juhos
2f328ce488
generic: move some common symbols to generic configuration
...
* CONFIG_MUTEX_SPIN_ON_OWNER
* CONFIG_DEFAULT_HYDLA
* CONFIG_DEFAULT_VENO
SVN-Revision: 21748
2010-06-10 08:58:14 +00:00
Gabor Juhos
5cad9d5c73
generic: standardize CONFIG_INLINE_* symbols usage
...
SVN-Revision: 21746
2010-06-10 08:09:41 +00:00
Daniel Dickinson
f296eeab53
brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design)
...
SVN-Revision: 21631
2010-05-30 02:04:56 +00:00
Daniel Dickinson
6a267cfa76
brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods
...
SVN-Revision: 21630
2010-05-30 01:44:37 +00:00
Daniel Dickinson
40c53c6556
brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21629
2010-05-30 01:33:20 +00:00
Daniel Dickinson
82edb6eafa
brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21628
2010-05-30 01:33:09 +00:00
Daniel Dickinson
cc8fba8441
brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
...
SVN-Revision: 21627
2010-05-30 01:32:58 +00:00
Daniel Dickinson
bd8cfa63f4
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
...
SVN-Revision: 21626
2010-05-30 01:32:47 +00:00
Nicolas Thill
e74e289fa8
update linux kernel to 2.6.32.14
...
SVN-Revision: 21583
2010-05-27 18:09:09 +00:00
Nicolas Thill
46e2eea1ef
target/linux: refresh 2.6.32 patches
...
SVN-Revision: 21566
2010-05-24 20:35:46 +00:00
Hauke Mehrtens
b18a1d217b
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
...
SVN-Revision: 21540
2010-05-23 13:16:51 +00:00
Florian Fainelli
f89ff525ee
revert r21085, fixes #7282
...
SVN-Revision: 21352
2010-05-04 08:07:39 +00:00
Florian Fainelli
1017215649
do not write to per-port over-current register, which is bogus ( #6898 )
...
SVN-Revision: 21306
2010-05-02 19:14:10 +00:00
Raphaël Huck
f87eac79bb
rename reset_buttons to buttons
...
SVN-Revision: 21255
2010-04-29 12:54:24 +00:00
Raphaël Huck
ccfe1f7886
add WPS button support for nb4 boards
...
SVN-Revision: 21254
2010-04-29 12:51:41 +00:00
Raphaël Huck
b29ef93886
fix gpio button key code, match button-hotplug code
...
SVN-Revision: 21253
2010-04-29 12:51:02 +00:00
Raphaël Huck
5af6e7724b
fix gpio_button device register
...
SVN-Revision: 21252
2010-04-29 12:50:09 +00:00
Raphaël Huck
73e450f44a
fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel
...
SVN-Revision: 21231
2010-04-28 12:30:32 +00:00
Raphaël Huck
1a07f81239
extend bcm63xx_wdt driver for debugging purposes, thx Miguel
...
SVN-Revision: 21199
2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis
fdac9ae836
sync to kernel 2.6.32.12
...
SVN-Revision: 21195
2010-04-27 14:30:08 +00:00
Raphaël Huck
8df378a918
add neufbox 4 board support, thx Miguel & Florian
...
SVN-Revision: 21193
2010-04-27 13:49:31 +00:00
Raphaël Huck
266c0bf900
add NXP 74HC164 chip driver support, thx Miguel & Florian
...
SVN-Revision: 21192
2010-04-27 13:48:26 +00:00
Raphaël Huck
cf1654354b
add extended platform devices patch, thx Miguel & Florian
...
SVN-Revision: 21191
2010-04-27 13:46:22 +00:00
Florian Fainelli
d15e136deb
fix spi chip select configuration
...
SVN-Revision: 21164
2010-04-26 13:33:48 +00:00
Florian Fainelli
84dd37d930
fix bcm6358 spi base register address ( #7234 )
...
SVN-Revision: 21163
2010-04-26 09:22:27 +00:00
Florian Fainelli
52231f694d
the SPI_CMD register is 16-bits wide
...
SVN-Revision: 21162
2010-04-26 09:22:23 +00:00
Nicolas Thill
b1b2b04639
package/kernel: move PCMCIA modules to their own file & submenu
...
SVN-Revision: 21136
2010-04-24 13:53:31 +00:00
Nicolas Thill
484051d055
package/kernel: move target specific modules to their own target files
...
SVN-Revision: 21132
2010-04-24 13:34:51 +00:00
Florian Fainelli
2bab1a43be
register spi controller, remove whitespaces
...
SVN-Revision: 21096
2010-04-22 16:35:49 +00:00
Florian Fainelli
6b423d5ecb
resync 2.6.33 mtd patch with the one for 2.6.32
...
SVN-Revision: 21095
2010-04-22 16:35:44 +00:00
Florian Fainelli
41836b16bb
fix wrong refresh on flashmap patch
...
SVN-Revision: 21094
2010-04-22 16:35:01 +00:00
Florian Fainelli
ca3e07d639
re-instate SPI support
...
SVN-Revision: 21087
2010-04-22 15:27:51 +00:00
Florian Fainelli
0b47141194
refresh 2.6.32 patches
...
SVN-Revision: 21086
2010-04-22 15:27:46 +00:00
Florian Fainelli
be2a5389e6
alwasy read imagetag with 64K erase block size
...
SVN-Revision: 21085
2010-04-22 15:27:42 +00:00
Gabor Juhos
81062a12ac
kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels
...
SVN-Revision: 21081
2010-04-22 07:12:09 +00:00
Daniel Dickinson
fe5d55977e
tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
...
SVN-Revision: 20850
2010-04-14 00:45:48 +00:00
Nicolas Thill
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
Florian Fainelli
b87e590b24
do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338
...
SVN-Revision: 20765
2010-04-09 18:43:36 +00:00
Florian Fainelli
2a4fb82289
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
...
SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
Florian Fainelli
dad85cddac
move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
...
SVN-Revision: 20548
2010-03-28 18:11:06 +00:00
Gabor Juhos
e66a368bd1
kernel: update to 2.6.32.10
...
SVN-Revision: 20444
2010-03-26 10:45:25 +00:00
Florian Fainelli
10d4e5b4b0
drop support for 2.6.30 kernel
...
SVN-Revision: 20438
2010-03-26 10:12:48 +00:00
Florian Fainelli
928dfc550f
add support for D4PW board, patch from mexit
...
SVN-Revision: 20420
2010-03-25 12:06:01 +00:00
Florian Fainelli
f2e91995ea
refresh 2.6.32 patches, fix livebox support ( #6821 )
...
SVN-Revision: 20204
2010-03-14 16:21:28 +00:00
Nicolas Thill
e1863691d9
do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
...
SVN-Revision: 20136
2010-03-11 09:50:11 +00:00
Florian Fainelli
2c13d45b29
do not register devices in device_initcall level, this breaks the SSB SPROM registration
...
SVN-Revision: 19957
2010-03-02 21:49:37 +00:00
Florian Fainelli
0cd5b9983f
remove mail headers from patches
...
SVN-Revision: 19935
2010-03-01 14:55:34 +00:00
Florian Fainelli
4f4066d3e0
add support for 2.6.33
...
SVN-Revision: 19921
2010-02-28 21:24:34 +00:00
Florian Fainelli
984ac762e4
add support for 2.6.32, dropped the SPI patch for now
...
SVN-Revision: 19919
2010-02-28 20:50:51 +00:00
Florian Fainelli
ada5848ba6
build images for RG100A (bcm6358-based boards) ( #6755 )
...
SVN-Revision: 19894
2010-02-28 11:09:39 +00:00
Florian Fainelli
12a2f9b7b8
fix gpio-leds registration for boards having less than 8 LEDs ( #6528 )
...
SVN-Revision: 19793
2010-02-21 14:27:17 +00:00
Florian Fainelli
8a1f7817d1
fix the receiving of packets with a 1500 mtu and vlan enabled ( #6698 )
...
SVN-Revision: 19753
2010-02-19 11:56:13 +00:00
Imre Kaloz
825b37cc56
clean up handling of some kernel symbols
...
SVN-Revision: 19581
2010-02-11 09:33:16 +00:00
Florian Fainelli
e716256d86
fix printing of mtd offsets, remove whitespaces.
...
SVN-Revision: 19475
2010-01-31 21:37:25 +00:00
Florian Fainelli
b8d99458ff
move files to files-2.6.30, to ease newer kernel integration
...
SVN-Revision: 19471
2010-01-31 21:00:50 +00:00
Daniel Dickinson
022594b0ed
brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261
...
SVN-Revision: 19361
2010-01-28 16:54:00 +00:00
Felix Fietkau
2aa0d20756
replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images
...
SVN-Revision: 19293
2010-01-23 17:21:18 +00:00
Daniel Dickinson
f623119680
Fix typo in AGPF_S0 reset button definition
...
SVN-Revision: 19160
2010-01-16 03:13:56 +00:00
Claudio Mignanti
b031e14bf0
bcm63xx: add gpio leds to alice gate
...
SVN-Revision: 19152
2010-01-15 13:30:46 +00:00
Florian Fainelli
a47b8566a1
update to 2.6.30, refresh patches
...
SVN-Revision: 18635
2009-12-04 14:52:45 +00:00
Felix Fietkau
fa0396c530
kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config
...
SVN-Revision: 18603
2009-11-29 14:31:55 +00:00
Florian Fainelli
0adbdf6409
add support for the RTA1025W_16 board ( #5979 )
...
SVN-Revision: 18476
2009-11-22 14:53:20 +00:00
Imre Kaloz
6b280112f2
some more Kconfig symbol move..
...
SVN-Revision: 18371
2009-11-11 11:52:41 +00:00
Imre Kaloz
1d62d9a95c
another round of kernel config cleanups
...
SVN-Revision: 18370
2009-11-11 11:42:24 +00:00
Imre Kaloz
ef42fb4c13
sort all target config files
...
SVN-Revision: 18367
2009-11-11 09:27:13 +00:00
Florian Fainelli
e9a02ff509
merge upstream fixes on mdio loop
...
SVN-Revision: 18335
2009-11-07 12:48:17 +00:00
Florian Fainelli
9a84de9e01
images without tagid now fallback to the untouched partition layout ( #6093 )
...
SVN-Revision: 18288
2009-11-03 19:59:04 +00:00
Florian Fainelli
5e7b871d8a
remove no longer used configs and patches
...
SVN-Revision: 18221
2009-10-30 09:55:53 +00:00
Florian Fainelli
411d1ba1bb
do not generate trx images, this is useless
...
SVN-Revision: 18204
2009-10-29 13:39:29 +00:00
Florian Fainelli
338490bd50
remove 2.6.28 support, we never really used it
...
SVN-Revision: 18156
2009-10-25 21:13:46 +00:00
Florian Fainelli
7100c1efd9
switch to 2.6.30.9
...
SVN-Revision: 18155
2009-10-25 21:10:53 +00:00
Florian Fainelli
46c66bba36
update to 2.6.27.35
...
SVN-Revision: 18125
2009-10-23 09:12:17 +00:00
Nicolas Thill
f22156bf9e
brcm63xx: fix cardbus support with BCM6358 ( closes : #5918 )
...
SVN-Revision: 17935
2009-10-05 20:40:05 +00:00
Andy Boyett
c85a89348f
move IMAGE_CMDLINE_HACK default to generic from targets
...
SVN-Revision: 17905
2009-10-05 17:05:34 +00:00
Imre Kaloz
85fcc97a13
update to latest 2.6.27 and 2.6.30 kernels
...
SVN-Revision: 17602
2009-09-17 11:22:33 +00:00
Florian Fainelli
031e6f65ba
update to 2.6.27.33
...
SVN-Revision: 17569
2009-09-11 07:45:08 +00:00
Gabor Juhos
47c0d7419f
kernel: get rid of the simple_prom_emulator, it is not really useful
...
SVN-Revision: 17567
2009-09-10 18:30:20 +00:00
Gabor Juhos
d59f5b3a98
kernel: add generic image_cmdline hack to MIPS targets
...
SVN-Revision: 17563
2009-09-10 18:30:01 +00:00
Florian Fainelli
43d0be69d7
update to 2.6.27.32
...
SVN-Revision: 17548
2009-09-09 07:13:09 +00:00
Florian Fainelli
b9c0291e32
prevent gpio-buttons registration failure
...
SVN-Revision: 17542
2009-09-08 15:24:06 +00:00
Florian Fainelli
8ceff55a08
fix typos against the gpio buttons driver ( #5804 )
...
SVN-Revision: 17538
2009-09-07 18:17:45 +00:00
Florian Fainelli
65fa1debda
add infrastructure to register gpio-input reset button
...
SVN-Revision: 17526
2009-09-06 13:54:17 +00:00
Florian Fainelli
294ec33e47
fix reboot hang on bcm6345, thanks AndyI
...
SVN-Revision: 17465
2009-09-02 08:32:00 +00:00
Florian Fainelli
63b86723b1
switch to 2.6.27.30
...
SVN-Revision: 17291
2009-08-17 09:17:06 +00:00
Florian Fainelli
3fd180eb53
add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA
...
SVN-Revision: 17234
2009-08-12 08:41:47 +00:00
Florian Fainelli
7610c78205
fix typo, INT_MASK is writable, INT_STATUS is not
...
SVN-Revision: 17229
2009-08-11 18:57:04 +00:00
Florian Fainelli
dd8b0f9fb9
more bcm63xx definition fixes, thanks AndyI
...
SVN-Revision: 17227
2009-08-11 18:50:07 +00:00
Florian Fainelli
85698765da
add support for the Pirelli AG226G board ( #5337 )
...
SVN-Revision: 17190
2009-08-09 10:19:47 +00:00
Florian Fainelli
2d629e3a01
remove useless hard reset in the SPI controller driver
...
SVN-Revision: 17189
2009-08-09 10:18:30 +00:00
Florian Fainelli
2437f53f1d
fix assignment instead of comparison in the mtd driver ( #5649 )
...
SVN-Revision: 17188
2009-08-09 10:08:07 +00:00
Florian Fainelli
8866ab8a02
merge upstream fixes for bcm63xx_enet
...
SVN-Revision: 17175
2009-08-08 11:25:36 +00:00
Florian Fainelli
5138aa203e
bcm6345 fixes from AndyI
...
SVN-Revision: 17153
2009-08-06 20:33:42 +00:00
Florian Fainelli
48c1634d3e
fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
...
SVN-Revision: 17149
2009-08-06 18:53:44 +00:00
Florian Fainelli
dd78f746a5
disable watchdog for bcm6345 until it gets fixed
...
SVN-Revision: 17148
2009-08-06 18:44:20 +00:00
Florian Fainelli
39c22483bd
fix printing of offsets
...
SVN-Revision: 17099
2009-08-02 13:50:39 +00:00
Florian Fainelli
85119470d2
add experimental support for 2.6.30.4
...
SVN-Revision: 17081
2009-08-01 16:56:36 +00:00
Florian Fainelli
e58d0f346d
more bcm6345 fixes and definitions, thanks to AndyI
...
SVN-Revision: 17066
2009-07-31 20:15:43 +00:00
Florian Fainelli
c5879ba76d
refresh 2.6.27 patches
...
SVN-Revision: 17061
2009-07-31 11:10:20 +00:00
Florian Fainelli
252607a79c
update to 2.6.27.29
...
SVN-Revision: 17060
2009-07-31 11:09:27 +00:00
Florian Fainelli
dd622864e1
generate images for RTA1025W_16-based routers ( #5594 )
...
SVN-Revision: 17058
2009-07-31 10:47:00 +00:00
Florian Fainelli
9887dc6100
add experimental support for 2.6.28.10, tested on bcm6338
...
SVN-Revision: 17054
2009-07-30 21:29:25 +00:00
Florian Fainelli
3c806e767e
enable 6345 support now that it boots up to user-space
...
SVN-Revision: 17033
2009-07-27 23:04:58 +00:00
Florian Fainelli
dabf5e71a6
fix typo for the flash start address on bcm6345
...
SVN-Revision: 17032
2009-07-27 22:31:28 +00:00
Florian Fainelli
103c99b960
switch to 2.6.27.28
...
SVN-Revision: 17027
2009-07-27 10:01:33 +00:00
Florian Fainelli
4d38620058
fix malformed patch
...
SVN-Revision: 16975
2009-07-25 16:18:02 +00:00
Florian Fainelli
755aae526a
bcm6345 does not seem to handle r4k_wait correctly, disable it ( #5474 )
...
SVN-Revision: 16971
2009-07-24 20:25:31 +00:00
Florian Fainelli
c4d517c7bb
use 2.6.27.7
...
SVN-Revision: 16968
2009-07-24 17:03:03 +00:00
Florian Fainelli
5df0606265
fix typos introduced in 16942
...
SVN-Revision: 16943
2009-07-21 12:22:01 +00:00
Florian Fainelli
8b17c74376
make the ethernet driver compile with newer kernels
...
SVN-Revision: 16942
2009-07-21 11:48:08 +00:00
Florian Fainelli
43a3f9555a
request irq with the platform driver name instead of bus_id which is being removed in newer kernels
...
SVN-Revision: 16932
2009-07-20 10:52:08 +00:00
Florian Fainelli
a0a85ba7c6
we are using the default-on trigger for power LEDs, no need to change their state from userspace
...
SVN-Revision: 16892
2009-07-18 09:27:33 +00:00
Florian Fainelli
ecad504c39
register GPIO-connected LEDs for known boards
...
SVN-Revision: 16887
2009-07-18 00:40:23 +00:00
Florian Fainelli
fe05e1f37a
mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358
...
SVN-Revision: 16882
2009-07-17 15:58:06 +00:00
Florian Fainelli
d0fdf2c5ed
fix comment only valid for bcm6345
...
SVN-Revision: 16881
2009-07-17 15:57:09 +00:00
Florian Fainelli
349d57eee4
resync kernel configuration and enable kexec
...
SVN-Revision: 16795
2009-07-12 11:31:00 +00:00
Florian Fainelli
9d2522748f
add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big
...
SVN-Revision: 16709
2009-07-06 11:28:34 +00:00
Florian Fainelli
9a387036d2
add a profile with no Wi-Fi drivers enabled, useful for bcm6338
...
SVN-Revision: 16708
2009-07-06 11:21:22 +00:00
Florian Fainelli
fefeecf52f
update to latest 2.6.27.26 stable kernel
...
SVN-Revision: 16659
2009-07-03 09:31:52 +00:00
Florian Fainelli
0bda624fc7
add the infrastructure to use a MPI/GPIO connected VoIP DSP
...
SVN-Revision: 16650
2009-07-01 21:00:41 +00:00
Florian Fainelli
8a8943671a
fixes for the bcm6338 clocks, thanks Maxime
...
SVN-Revision: 16640
2009-07-01 13:49:20 +00:00
Florian Fainelli
5a7c5b2d36
a couple of more fixes to get 6345 booting up to the console handover
...
SVN-Revision: 16636
2009-06-30 13:45:49 +00:00
Florian Fainelli
8179904540
shared DMA zone is twice smaller on 6338
...
SVN-Revision: 16608
2009-06-28 20:06:44 +00:00
Florian Fainelli
e6d307ab4b
turn on size optimization for bcm63xx
...
SVN-Revision: 16607
2009-06-28 20:06:13 +00:00
Florian Fainelli
4096da301d
off-by-one gpio numbers for bcm6338
...
SVN-Revision: 16597
2009-06-28 04:23:11 +00:00
Florian Fainelli
8813961e86
bcm6338 can support PCI since it has MPI
...
SVN-Revision: 16592
2009-06-27 21:43:55 +00:00
Florian Fainelli
ca5de76ed3
more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
...
SVN-Revision: 16589
2009-06-27 20:32:43 +00:00
Florian Fainelli
d02d75ba02
fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
...
SVN-Revision: 16587
2009-06-27 18:58:00 +00:00
Florian Fainelli
0bb3a46217
fix a stupid typo preventing the board from being detected
...
SVN-Revision: 16586
2009-06-27 18:30:45 +00:00
Florian Fainelli
bcc1dd7f99
prevent bcm6338 and bcm6345 from crashing very early
...
SVN-Revision: 16585
2009-06-27 18:23:58 +00:00
Florian Fainelli
7da8855c79
only register fallback sprom and enable PCI if we actually have support for PCI
...
SVN-Revision: 16581
2009-06-27 16:17:18 +00:00
Florian Fainelli
bf0942ce5c
do not bloat the kernel with experimental bcm6345 for now
...
SVN-Revision: 16580
2009-06-27 15:52:03 +00:00
Florian Fainelli
13a8ed9ca0
more missing register definitions for bcm6338
...
SVN-Revision: 16579
2009-06-27 15:51:27 +00:00
Florian Fainelli
287a2c0ba9
more bcm6338 and bcm6345 related fixes
...
SVN-Revision: 16568
2009-06-26 12:34:35 +00:00
Florian Fainelli
8c4137900c
define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
...
SVN-Revision: 16567
2009-06-26 11:08:12 +00:00
Florian Fainelli
45c25ff988
generate images for the bcm6338w
...
SVN-Revision: 16566
2009-06-26 10:27:37 +00:00
Florian Fainelli
e86e91380a
add board definitions for the bcm6338w
...
SVN-Revision: 16565
2009-06-26 10:27:13 +00:00
Florian Fainelli
1795111337
add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson ( #5364 )
...
SVN-Revision: 16506
2009-06-18 15:00:32 +00:00
Florian Fainelli
606193fc1f
generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
...
SVN-Revision: 16490
2009-06-17 13:16:59 +00:00
Florian Fainelli
a68fe5655e
use 2.6.27.5
...
SVN-Revision: 16486
2009-06-17 08:46:47 +00:00
Imre Kaloz
c83b031b84
use the same i/o schedulers for all targets
...
SVN-Revision: 16479
2009-06-15 20:43:02 +00:00
Florian Fainelli
cc12508ee3
use build system REVISION variable ( #5317 )
...
SVN-Revision: 16400
2009-06-10 13:43:48 +00:00
Florian Fainelli
ca16accfbb
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
...
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>
SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
Florian Fainelli
e9c22f7939
cleanup the watchdog driver a bit
...
SVN-Revision: 16395
2009-06-09 21:35:51 +00:00
Florian Fainelli
972619416e
fix the watchdog driver and enable it by default
...
SVN-Revision: 16394
2009-06-09 21:28:15 +00:00
Florian Fainelli
01118457e8
rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson ( fixes #4987 ).
...
SVN-Revision: 16393
2009-06-09 08:04:52 +00:00
Florian Fainelli
4f72fef05e
remove this line which got accidentaly succesfully applied, but should not have ( #5285 )
...
SVN-Revision: 16380
2009-06-08 13:42:11 +00:00
Florian Fainelli
8f84508c25
fix ethernet driver removal
...
SVN-Revision: 16335
2009-06-04 10:04:53 +00:00
Florian Fainelli
50936e1aa5
fix pcmcia device removal
...
SVN-Revision: 16334
2009-06-04 10:04:11 +00:00
Florian Fainelli
116a53a154
add missing null entry in pcmcia driver
...
SVN-Revision: 16333
2009-06-04 10:03:41 +00:00
Florian Fainelli
4049592268
request gpio pins and set direction correctly for pcmcia
...
SVN-Revision: 16332
2009-06-04 10:03:03 +00:00
Florian Fainelli
287a0efd68
be SMP safe even with gpiolib
...
SVN-Revision: 16331
2009-06-04 10:02:23 +00:00
Florian Fainelli
9013e936ed
cache gpio values in gpio_set
...
SVN-Revision: 16330
2009-06-04 10:01:55 +00:00
Florian Fainelli
1208ffaedb
use the correct number of GPIOs for bcm6358
...
SVN-Revision: 16329
2009-06-04 10:01:03 +00:00
Florian Fainelli
c95420f06d
register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
...
SVN-Revision: 16328
2009-06-04 09:59:28 +00:00
Florian Fainelli
d2b2ce325a
merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU.
...
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
SVN-Revision: 16302
2009-06-03 08:55:18 +00:00
Florian Fainelli
05b40c8d13
backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
...
SVN-Revision: 16277
2009-06-01 18:27:51 +00:00
Florian Fainelli
9be0df0caa
include wpa-supplicant iw in the default profile
...
SVN-Revision: 16195
2009-05-29 15:33:14 +00:00
Florian Fainelli
027d6ac4c5
also include the SPI driver in the gw6x00 profile
...
SVN-Revision: 16077
2009-05-26 11:15:27 +00:00
Florian Fainelli
a94930dbbb
include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking
...
SVN-Revision: 16075
2009-05-26 10:25:55 +00:00
Florian Fainelli
fa45acd690
add the Tecom GW6x00 (6000 and 6200) board profile
...
SVN-Revision: 16059
2009-05-25 16:14:13 +00:00
Florian Fainelli
f150bc5e36
update to new stable 2.6.27.24
...
SVN-Revision: 15931
2009-05-20 09:00:09 +00:00
Florian Fainelli
1322e2721a
disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211
...
SVN-Revision: 15926
2009-05-19 18:15:19 +00:00
Imre Kaloz
e965c02820
even more config file cleanup
...
SVN-Revision: 15913
2009-05-18 13:21:25 +00:00
Florian Fainelli
ce87c61ae9
add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later
...
SVN-Revision: 15911
2009-05-18 11:11:23 +00:00
Florian Fainelli
0d7f5f8d2c
add support for sysupgrade ( #5117 )
...
SVN-Revision: 15900
2009-05-17 16:53:57 +00:00
Imre Kaloz
91e866f383
config cleanups
...
SVN-Revision: 15861
2009-05-15 10:40:04 +00:00
Imre Kaloz
26b42d5807
cardbus != pcmcia -- disable it in b43
...
SVN-Revision: 15857
2009-05-15 08:58:02 +00:00
Florian Fainelli
480b27e9f9
add missing configuration symbol
...
SVN-Revision: 15856
2009-05-15 07:04:32 +00:00
Imre Kaloz
6bfddb152f
some additional config file cleanup..
...
SVN-Revision: 15845
2009-05-14 13:32:34 +00:00
Imre Kaloz
c83d91fcfc
unify congestion control options
...
SVN-Revision: 15844
2009-05-14 12:42:07 +00:00
Imre Kaloz
a9c958c2de
make kernels use /etc/preinit by default
...
SVN-Revision: 15840
2009-05-14 10:20:53 +00:00
Florian Fainelli
01be18725f
also supports pcmcia
...
SVN-Revision: 15693
2009-05-07 15:25:15 +00:00
Imre Kaloz
e9b397805d
some more kernel config cleanup.. last for today :)
...
SVN-Revision: 15606
2009-05-04 20:57:02 +00:00
Imre Kaloz
0f2b1d070a
more cleanup
...
SVN-Revision: 15605
2009-05-04 20:31:47 +00:00
Imre Kaloz
a614251e6c
cleanup MTD option handling
...
SVN-Revision: 15602
2009-05-04 19:13:43 +00:00
Imre Kaloz
38c5311047
move MFD stuff to the generic kernel configs
...
SVN-Revision: 15587
2009-05-04 13:51:29 +00:00
Imre Kaloz
64fbade939
refresh patches
...
SVN-Revision: 15581
2009-05-04 11:35:08 +00:00
Imre Kaloz
86a4a6edb9
upgrade to newest stable kernel versions
...
SVN-Revision: 15575
2009-05-03 16:58:06 +00:00
Florian Fainelli
a036aca55c
now that we register gpiodev, also include gpioctl in the default image
...
SVN-Revision: 15510
2009-04-30 14:09:45 +00:00
Florian Fainelli
9485c3e834
register gpiodev
...
SVN-Revision: 15509
2009-04-30 14:09:01 +00:00
Florian Fainelli
dd2b72105b
fix redundant driver name printing in probe function
...
SVN-Revision: 15254
2009-04-19 13:32:54 +00:00
Florian Fainelli
1f334e3caa
make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson ( #4909 , #4943 )
...
SVN-Revision: 15253
2009-04-19 13:18:48 +00:00
Felix Fietkau
34939cad39
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
Florian Fainelli
4bd65101ad
do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module ( #4659 )
...
SVN-Revision: 15215
2009-04-12 12:54:38 +00:00
Florian Fainelli
14832d3c23
some more fixes to the SPI controller driver
...
SVN-Revision: 15146
2009-04-08 08:52:57 +00:00
Florian Fainelli
5d5c8300b1
imagetag's -k argument is expected to be hexadecimal instead of decimal ( #4885 )
...
SVN-Revision: 15133
2009-04-07 13:22:32 +00:00
Florian Fainelli
fb3fbea164
override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358
...
SVN-Revision: 15020
2009-03-24 15:22:07 +00:00
Hauke Mehrtens
f5dc2ce0aa
refresh patches
...
SVN-Revision: 15018
2009-03-24 15:09:20 +00:00
Hauke Mehrtens
e82dce69a3
update to kernel version 2.6.27.21
...
SVN-Revision: 15016
2009-03-24 15:05:51 +00:00
Florian Fainelli
501ebb4f74
enable all blocks on 6338 and uart clock on 6345
...
SVN-Revision: 14957
2009-03-21 10:50:44 +00:00
Florian Fainelli
0972ee5331
add support for bcm6345 SoC, needs testing
...
SVN-Revision: 14953
2009-03-20 15:08:02 +00:00
Florian Fainelli
32c29f1aaf
fix SPI register switch and prepare for UDC, thanks to Henk Vergonet ( #4783 )
...
SVN-Revision: 14914
2009-03-17 11:28:54 +00:00
Florian Fainelli
b865f9b722
add the CFE offset command line option to the imagetag utility, closes ( #4366 )
...
SVN-Revision: 14896
2009-03-16 12:29:11 +00:00
Florian Fainelli
6495fa36ea
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
...
SVN-Revision: 14850
2009-03-12 08:54:04 +00:00
Florian Fainelli
8065eb4a55
do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
...
SVN-Revision: 14848
2009-03-11 10:32:44 +00:00
Florian Fainelli
51125fb616
make SPI work in full-duplex mode by default
...
SVN-Revision: 14841
2009-03-10 15:28:29 +00:00
Florian Fainelli
add058c382
include kmod-switch in the default images
...
SVN-Revision: 14827
2009-03-09 21:58:49 +00:00
Florian Fainelli
58a11bcb40
package the bcm63xx-spi driver
...
SVN-Revision: 14794
2009-03-08 19:21:55 +00:00
Florian Fainelli
ae1ed9b7f4
add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
...
SVN-Revision: 14793
2009-03-08 15:27:46 +00:00
Florian Fainelli
871b0d6fed
fix SPI accessors
...
SVN-Revision: 14792
2009-03-08 14:20:15 +00:00
Florian Fainelli
1bcf5d0de6
fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
...
SVN-Revision: 14790
2009-03-08 12:43:13 +00:00
Florian Fainelli
bf7f2939c2
compile and register SPI controller device
...
SVN-Revision: 14789
2009-03-08 12:18:26 +00:00
Florian Fainelli
1e92d0355d
make bcm6358 consistend with the other boards naming
...
SVN-Revision: 14788
2009-03-08 12:17:19 +00:00
Florian Fainelli
b1abddb45f
fix some SPI register definitions and platform-device registration code
...
SVN-Revision: 14787
2009-03-08 12:13:52 +00:00
Florian Fainelli
5e8dfe53b6
prepare for SPI controller driver
...
SVN-Revision: 14755
2009-03-06 01:15:00 +00:00
Florian Fainelli
9422b140ba
fix SPI register definitions
...
SVN-Revision: 14754
2009-03-06 01:13:10 +00:00
Florian Fainelli
2d1ed46c68
fix a bcm963xx-flash warning
...
SVN-Revision: 14730
2009-03-02 18:55:47 +00:00
Florian Fainelli
6f484fc283
provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
...
SVN-Revision: 14683
2009-02-27 15:48:23 +00:00
Florian Fainelli
b539d11497
move the device registration to an earlier initcall level, required for fallback SPROM to work
...
SVN-Revision: 14681
2009-02-27 15:18:34 +00:00
Felix Fietkau
11014b5cea
disable all kernel config options that are set to =m
...
SVN-Revision: 14611
2009-02-22 04:44:24 +00:00
Hauke Mehrtens
3f085cd501
update to 2.6.28.7 and 2.6.27.19
...
SVN-Revision: 14601
2009-02-21 18:53:05 +00:00
Gabor Juhos
47665da430
update to 2.6.27.17
...
SVN-Revision: 14513
2009-02-15 07:47:12 +00:00
Florian Fainelli
eda8310293
always select kmod-ssb, pci is supported
...
SVN-Revision: 14492
2009-02-13 00:13:39 +00:00
Florian Fainelli
99203ed0b1
do not overried 802.1q and PHY kernel configuration symbols
...
SVN-Revision: 14468
2009-02-10 17:53:52 +00:00
Gabor Juhos
7f04c52b92
update to 2.6.27.15
...
SVN-Revision: 14440
2009-02-08 12:32:39 +00:00
Florian Fainelli
1fc20f18d4
resync kernel configuration
...
SVN-Revision: 14395
2009-02-03 19:59:01 +00:00
Florian Fainelli
730346e2d5
add support for user9102 boards ( #4537 )
...
SVN-Revision: 14305
2009-01-31 16:01:20 +00:00
Florian Fainelli
c2c0d74f67
generate images for old CFE based boards like the Davolink DV201
...
SVN-Revision: 14264
2009-01-29 14:56:45 +00:00
Florian Fainelli
d7cb033a04
Add board definitions for the Davolink DV201AMR
...
SVN-Revision: 14263
2009-01-29 14:54:13 +00:00
Gabor Juhos
2a0825b4d3
update to 2.6.27.13
...
SVN-Revision: 14179
2009-01-25 18:33:19 +00:00
Gabor Juhos
0c2e187f54
switch to 2.6.27.12
...
SVN-Revision: 14157
2009-01-23 13:30:27 +00:00
Florian Fainelli
46b91ed787
frequency is in Hz, thanks Joel
...
SVN-Revision: 14067
2009-01-17 15:29:36 +00:00
Florian Fainelli
5ce93c07a5
fix SPI register definitions
...
SVN-Revision: 14048
2009-01-15 22:53:32 +00:00
Florian Fainelli
5905a48169
allow bcm6338 to get the base address of the memory controller register, required to detect memory size
...
SVN-Revision: 14047
2009-01-15 22:42:22 +00:00
Gabor Juhos
3ca7f3bd6f
update to 2.6.27.11
...
SVN-Revision: 14043
2009-01-15 13:40:35 +00:00
Florian Fainelli
4c7d2cf90e
correct SPI register size
...
SVN-Revision: 13886
2009-01-06 14:49:27 +00:00
Andy Boyett
9f8c82da09
Add hostapd-mini to default images where applicable
...
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
Gabor Juhos
8395d01b59
update to 2.6.27.10
...
SVN-Revision: 13695
2008-12-19 19:25:35 +00:00
Florian Fainelli
85d59fbf8c
add board registration of the bcm96338gw
...
SVN-Revision: 13693
2008-12-19 17:24:29 +00:00
Florian Fainelli
3f7137022d
6338 has no PCI
...
SVN-Revision: 13692
2008-12-19 17:08:11 +00:00
Florian Fainelli
3dd67d64f4
add experimental support for bcm6338
...
SVN-Revision: 13691
2008-12-19 17:05:09 +00:00
Florian Fainelli
fa5a568380
Register watchdog driver
...
SVN-Revision: 13690
2008-12-19 15:00:33 +00:00
Florian Fainelli
42ff43386a
fix register definitions for bcm6358, thanks SGDA
...
SVN-Revision: 13688
2008-12-19 10:19:00 +00:00
Florian Fainelli
3ae3bf981e
resync kernel configuration
...
SVN-Revision: 13687
2008-12-19 10:16:52 +00:00
Florian Fainelli
7ab973e1af
Add bcm63xx_wdt but do not enable it yet
...
SVN-Revision: 13677
2008-12-17 14:06:03 +00:00
Gabor Juhos
e7336673b1
update to 2.6.27.9 and refresh patches
...
SVN-Revision: 13659
2008-12-16 10:37:14 +00:00
Florian Fainelli
562ff99c2c
Build images for Inventel Livebox
...
SVN-Revision: 13616
2008-12-12 15:16:57 +00:00
Florian Fainelli
34867901d0
Resync kernel config
...
SVN-Revision: 13607
2008-12-11 23:16:54 +00:00
Florian Fainelli
4025c12a2d
Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)
...
SVN-Revision: 13588
2008-12-10 23:57:23 +00:00
Florian Fainelli
4dc65aed63
Add support for Sagem F@ST2404 ( #4332 )
...
SVN-Revision: 13583
2008-12-10 16:13:41 +00:00
Florian Fainelli
5dc3098a6c
Disable CONFIG_NF_CT_ACCT
...
SVN-Revision: 13577
2008-12-10 01:39:29 +00:00
Florian Fainelli
6acf4c2a19
Fix remaining bug of the off-by-one error ;)
...
SVN-Revision: 13551
2008-12-08 21:00:00 +00:00
Florian Fainelli
fadddcc655
Enable ohci on bcm96348gw
...
SVN-Revision: 13549
2008-12-08 16:25:41 +00:00
Florian Fainelli
47050e72be
Prepare bcm63xx for SPI master support
...
SVN-Revision: 13547
2008-12-08 14:14:37 +00:00
Florian Fainelli
f3be50a031
Add support for bcm96348gw10 (Netgear DG834GT) ( #4319 )
...
SVN-Revision: 13540
2008-12-07 20:34:48 +00:00
Gabor Juhos
4992a87aeb
update to 2.6.27.8 and refresh patches
...
SVN-Revision: 13528
2008-12-06 09:59:55 +00:00
Gabor Juhos
919a8a9fe0
make mips_machine stuff available for other MIPS targets
...
SVN-Revision: 13492
2008-12-02 21:54:53 +00:00
Florian Fainelli
01a5c953a3
Fix an off-by one printing error
...
SVN-Revision: 13469
2008-12-02 14:11:54 +00:00
Florian Fainelli
043562037f
resync kernel config
...
SVN-Revision: 13433
2008-11-29 16:33:07 +00:00
Florian Fainelli
e8aad7938a
Improve Inventel Livebox support
...
SVN-Revision: 13427
2008-11-29 12:57:41 +00:00
Florian Fainelli
aa3c775b65
Reorder profiles numbering, broadcom being the most widely used
...
SVN-Revision: 13401
2008-11-28 16:35:10 +00:00
Florian Fainelli
cc2e43992d
bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver
...
SVN-Revision: 13379
2008-11-27 20:40:03 +00:00
Florian Fainelli
bbad86e098
Add missing config symbol for SSB
...
SVN-Revision: 13378
2008-11-27 20:38:01 +00:00
Florian Fainelli
44108d6a2d
Commit changes on the files for gpiolib
...
SVN-Revision: 13374
2008-11-27 10:38:36 +00:00
Florian Fainelli
36fc2d1f93
Convert brcm63xx to gpiolib
...
SVN-Revision: 13373
2008-11-27 10:38:01 +00:00
Florian Fainelli
1c77ec0587
Flatten brcm63xx patches, should make our life easier to patch files now ;)
...
SVN-Revision: 13368
2008-11-26 18:41:01 +00:00
Florian Fainelli
4fc7535fc7
Make 4-port LAN and 1 port wan configurations work
...
SVN-Revision: 13362
2008-11-26 15:51:55 +00:00
Imre Kaloz
752054346a
update to 2.6.27.7
...
SVN-Revision: 13347
2008-11-25 13:54:46 +00:00
Imre Kaloz
a695fa76a4
move THERMAL symbols into the generic config
...
SVN-Revision: 13346
2008-11-25 13:52:25 +00:00
Florian Fainelli
0f26e35e37
brcm63xx has pcmcia support and is able to run b43 on its pci bus
...
SVN-Revision: 13303
2008-11-20 23:08:20 +00:00
Florian Fainelli
5acddecc68
Update brcm63xx broadcom profile now that b43 is available
...
SVN-Revision: 13302
2008-11-20 23:01:48 +00:00
Florian Fainelli
8f5351a4f2
Synchroniz bcm63xx kernel configuration
...
SVN-Revision: 13300
2008-11-20 22:16:48 +00:00
Florian Fainelli
e854a26332
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
...
SVN-Revision: 13299
2008-11-20 21:26:11 +00:00
Florian Fainelli
107aa04e06
Generate valid images for the bcm96348gw board
...
SVN-Revision: 13298
2008-11-20 21:22:45 +00:00
Imre Kaloz
722c78cd1e
move some options to the generic 2.6.27 config
...
SVN-Revision: 13264
2008-11-17 17:28:12 +00:00
Imre Kaloz
7d09c0b086
update to 2.6.27.6
...
SVN-Revision: 13261
2008-11-17 17:22:30 +00:00
Florian Fainelli
0d4286b0b3
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
SVN-Revision: 13213
2008-11-15 11:30:22 +00:00
Florian Fainelli
cb126cd576
Package bcm63xx-pcmcia kernel module and fix compilation
...
SVN-Revision: 13212
2008-11-15 11:26:23 +00:00
Florian Fainelli
9bbc37d26b
Remove old kernel configuration files
...
SVN-Revision: 13211
2008-11-15 11:23:29 +00:00
Florian Fainelli
517e3d404c
Delete old brcm63xx files
...
SVN-Revision: 13210
2008-11-15 11:21:42 +00:00