brcm63xx: remove patches/configs for 2.6.35

SVN-Revision: 26709
2011-04-17 18:39:46 +00:00 · 2011-04-17 18:39:46 +00:00 · 1fcd26091b
commit 1fcd26091b
parent 8566daa5df
36 changed files with 0 additions and 5855 deletions
--- a/target/linux/brcm63xx/config-2.6.35
+++ b/target/linux/brcm63xx/config-2.6.35
@ -1,222 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_AR7 is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATH_COMMON is not set
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BCM47XX is not set
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BITREVERSE=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRAMFS=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_CS5535 is not set
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM963XX=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_POWERTV is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RAMZSWAP is not set
-CONFIG_RELAY=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-# CONFIG_TINY_RCU is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_ZONE_DMA_FLAG=0
--- a/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/007-usb-ohci-support.patch
@ -1,125 +0,0 @@
-The bcm63xx SOC has an integrated OHCI controller, this patch adds
-platform device registration and change board code to register ohci
-device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
- arch/mips/bcm63xx/Kconfig                          |    6 ++
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 5 files changed, 67 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
--- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -16,10 +16,16 @@ config BCM63XX_CPU_6345
- config BCM63XX_CPU_6348
- 	bool "support 6348 CPU"
- 	select HW_HAS_PCI
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC
-+	select USB_OHCI_BIG_ENDIAN_MMIO
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
- 	select HW_HAS_PCI
-+	select USB_ARCH_HAS_OHCI
-+	select USB_OHCI_BIG_ENDIAN_DESC
-+	select USB_OHCI_BIG_ENDIAN_MMIO
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
--- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,5 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
-+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-+		   dev-usb-ohci.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -877,6 +878,9 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
- 
--- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+	{
-+		/* start & end filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		/* start filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ohci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+	.name		= "bcm63xx_ohci",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(ohci_resources),
-+	.resource	= ohci_resources,
-+	.dev		= {
-+		.dma_mask		= &ohci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
-+		return 0;
-+
-+	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+	ohci_resources[0].end = ohci_resources[0].start;
-+	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+	ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+	return platform_device_register(&bcm63xx_ohci_device);
-+}
--- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
--- a/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/008-usb-ehci-support.patch
@ -1,117 +0,0 @@
-The bcm63xx SOC has an integrated EHCI controller, this patch adds
-platform device registration and change board code to register
-EHCI device when necessary.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
- arch/mips/bcm63xx/Kconfig                          |    2 +
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 ++
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   49 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 5 files changed, 62 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
--- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -26,6 +26,8 @@ config BCM63XX_CPU_6358
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_EHCI
-+	select USB_EHCI_BIG_ENDIAN_MMIO
- endmenu
- 
- source "arch/mips/bcm63xx/boards/Kconfig"
--- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- 		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-		   dev-usb-ohci.o
-+		   dev-usb-ohci.o dev-usb-ehci.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -878,6 +879,9 @@ int __init board_register_devices(void)
- 	    !board_get_mac_address(board.enet1.mac_addr))
- 		bcm63xx_enet_register(1, &board.enet1);
- 
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
- 	if (board.has_ohci0)
- 		bcm63xx_ohci_register();
- 
--- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,49 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+	{
-+		/* start & end filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		/* start filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 ehci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+	.name		= "bcm63xx_ehci",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(ehci_resources),
-+	.resource	= ehci_resources,
-+	.dev		= {
-+		.dma_mask		= &ehci_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+	if (!BCMCPU_IS_6358())
-+		return 0;
-+
-+	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+	ehci_resources[0].end = ehci_resources[0].start;
-+	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+	ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+	return platform_device_register(&bcm63xx_ehci_device);
-+}
--- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
--- a/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/010-add_bcm63xx_ohci_controller.patch
@ -1,202 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
- drivers/usb/host/ohci-bcm63xx.c |  166 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c     |    5 +
- drivers/usb/host/ohci.h         |    2 +-
- 3 files changed, 172 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
-
--- /dev/null
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -0,0 +1,166 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
-+{
-+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+	int ret;
-+
-+        /*
-+         * port 2 can be shared with USB slave, but all boards seem to
-+         * have only one host port populated, so we can hardcode it
-+         */
-+	ohci->num_ports = 1;
-+
-+	ret = ohci_init(ohci);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = ohci_run(ohci);
-+	if (ret < 0) {
-+		err("can't start %s", hcd->self.bus_name);
-+		ohci_stop(hcd);
-+		return ret;
-+	}
-+	return 0;
-+}
-+
-+static const struct hc_driver ohci_bcm63xx_hc_driver = {
-+	.description =		hcd_name,
-+	.product_desc =		"BCM63XX integrated OHCI controller",
-+	.hcd_priv_size =	sizeof(struct ohci_hcd),
-+
-+	.irq =			ohci_irq,
-+	.flags =		HCD_USB11 | HCD_MEMORY,
-+	.start =		ohci_bcm63xx_start,
-+	.stop =			ohci_stop,
-+	.shutdown =		ohci_shutdown,
-+	.urb_enqueue =		ohci_urb_enqueue,
-+	.urb_dequeue =		ohci_urb_dequeue,
-+	.endpoint_disable =	ohci_endpoint_disable,
-+	.get_frame_number =	ohci_get_frame,
-+	.hub_status_data =	ohci_hub_status_data,
-+	.hub_control =		ohci_hub_control,
-+	.start_port_reset =	ohci_start_port_reset,
-+};
-+
-+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+	struct resource *res_mem;
-+	struct usb_hcd *hcd;
-+	struct ohci_hcd *ohci;
-+	u32 reg;
-+	int ret, irq;
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	irq = platform_get_irq(pdev, 0);
-+	if (!res_mem || irq < 0)
-+		return -ENODEV;
-+
-+	if (BCMCPU_IS_6348()) {
-+		struct clk *clk;
-+		/* enable USB host clock */
-+		clk = clk_get(&pdev->dev, "usbh");
-+		if (IS_ERR(clk))
-+			return -ENODEV;
-+
-+		clk_enable(clk);
-+		usb_host_clock = clk;
-+		bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+
-+	} else if (BCMCPU_IS_6358()) {
-+		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+		/*
-+		 * The magic value comes for the original vendor BSP
-+		 * and is needed for USB to work. Datasheet does not
-+		 * help, so the magic value is used as-is.
-+		 */
-+		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+	} else
-+		return 0;
-+
-+	hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+	if (!hcd)
-+		return -ENOMEM;
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+		pr_debug("request_mem_region failed\n");
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+
-+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs) {
-+		pr_debug("ioremap failed\n");
-+		ret = -EIO;
-+		goto out1;
-+	}
-+
-+	ohci = hcd_to_ohci(hcd);
-+	ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
-+		OHCI_QUIRK_FRAME_NO;
-+	ohci_hcd_init(ohci);
-+
-+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+	if (ret)
-+		goto out2;
-+
-+	platform_set_drvdata(pdev, hcd);
-+	return 0;
-+
-+out2:
-+	iounmap(hcd->regs);
-+out1:
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+	usb_put_hcd(hcd);
-+	return ret;
-+}
-+
-+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(pdev);
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	usb_put_hcd(hcd);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	if (usb_host_clock) {
-+		clk_disable(usb_host_clock);
-+		clk_put(usb_host_clock);
-+	}
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver ohci_hcd_bcm63xx_driver = {
-+	.probe		= ohci_hcd_bcm63xx_drv_probe,
-+	.remove		= __devexit_p(ohci_hcd_bcm63xx_drv_remove),
-+	.shutdown	= usb_hcd_platform_shutdown,
-+	.driver		= {
-+		.name	= "bcm63xx_ohci",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ohci");
--- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1061,6 +1061,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ohci_hcd_da8xx_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_bcm63xx_driver
-+#endif
-+
- #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7763) || \
--- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -655,7 +655,7 @@ static inline u32 hc32_to_cpup (const st
-  * some big-endian SOC implementations.  Same thing happens with PSW access.
-  */
- 
-#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci)	0
--- a/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/011-add_bcm63xx_ehci_controller.patch
@ -1,178 +0,0 @@
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
- drivers/usb/host/ehci-bcm63xx.c |  154 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c     |    5 +
- 2 files changed, 159 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
-
--- /dev/null
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -0,0 +1,154 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
-+{
-+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+	int retval;
-+
-+	retval = ehci_halt(ehci);
-+	if (retval)
-+		return retval;
-+
-+	retval = ehci_init(hcd);
-+	if (retval)
-+		return retval;
-+
-+	ehci_reset(ehci);
-+	ehci_port_power(ehci, 0);
-+
-+	return retval;
-+}
-+
-+
-+static const struct hc_driver ehci_bcm63xx_hc_driver = {
-+	.description =		hcd_name,
-+	.product_desc =		"BCM63XX integrated EHCI controller",
-+	.hcd_priv_size =	sizeof(struct ehci_hcd),
-+
-+	.irq =			ehci_irq,
-+	.flags =		HCD_MEMORY | HCD_USB2,
-+
-+	.reset =		ehci_bcm63xx_setup,
-+	.start =		ehci_run,
-+	.stop =			ehci_stop,
-+	.shutdown =		ehci_shutdown,
-+
-+	.urb_enqueue =		ehci_urb_enqueue,
-+	.urb_dequeue =		ehci_urb_dequeue,
-+	.endpoint_disable =	ehci_endpoint_disable,
-+
-+	.get_frame_number =	ehci_get_frame,
-+
-+	.hub_status_data =	ehci_hub_status_data,
-+	.hub_control =		ehci_hub_control,
-+	.bus_suspend =		ehci_bus_suspend,
-+	.bus_resume =		ehci_bus_resume,
-+	.relinquish_port =	ehci_relinquish_port,
-+	.port_handed_over =	ehci_port_handed_over,
-+};
-+
-+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+	struct resource *res_mem;
-+	struct usb_hcd *hcd;
-+	struct ehci_hcd *ehci;
-+	u32 reg;
-+	int ret, irq;
-+
-+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	irq = platform_get_irq(pdev, 0);;
-+	if (!res_mem || irq < 0)
-+		return -ENODEV;
-+
-+	reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
-+	reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+	reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+	bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
-+
-+	/*
-+	 * The magic value comes for the original vendor BSP and is
-+	 * needed for USB to work. Datasheet does not help, so the
-+	 * magic value is used as-is.
-+	 */
-+	bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
-+
-+	hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+	if (!hcd)
-+		return -ENOMEM;
-+	hcd->rsrc_start = res_mem->start;
-+	hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+		pr_debug("request_mem_region failed\n");
-+		ret = -EBUSY;
-+		goto out;
-+	}
-+
-+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+	if (!hcd->regs) {
-+		pr_debug("ioremap failed\n");
-+		ret = -EIO;
-+		goto out1;
-+	}
-+
-+	ehci = hcd_to_ehci(hcd);
-+	ehci->big_endian_mmio = 1;
-+	ehci->big_endian_desc = 0;
-+	ehci->caps = hcd->regs;
-+	ehci->regs = hcd->regs +
-+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+	ehci->sbrn = 0x20;
-+
-+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+	if (ret)
-+		goto out2;
-+
-+	platform_set_drvdata(pdev, hcd);
-+	return 0;
-+
-+out2:
-+	iounmap(hcd->regs);
-+out1:
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+	usb_put_hcd(hcd);
-+	return ret;
-+}
-+
-+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+	struct usb_hcd *hcd;
-+
-+	hcd = platform_get_drvdata(pdev);
-+	usb_remove_hcd(hcd);
-+	iounmap(hcd->regs);
-+	usb_put_hcd(hcd);
-+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+	platform_set_drvdata(pdev, NULL);
-+	return 0;
-+}
-+
-+static struct platform_driver ehci_hcd_bcm63xx_driver = {
-+	.probe		= ehci_hcd_bcm63xx_drv_probe,
-+	.remove		= __devexit_p(ehci_hcd_bcm63xx_drv_remove),
-+	.shutdown	= usb_hcd_platform_shutdown,
-+	.driver		= {
-+		.name	= "bcm63xx_ehci",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ehci");
--- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_atmel_driver
- #endif
- 
-+#ifdef CONFIG_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define	PLATFORM_DRIVER		ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
-     !defined(XILINX_OF_PLATFORM_DRIVER)
--- a/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/020-watchdog.patch
@ -1,386 +0,0 @@
--- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- 
- # PARISC Architecture
- 
--- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -875,6 +875,16 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config BCM63XX_WDT
-+	tristate "Broadcom BCM63xx hardware watchdog"
-+	depends on BCM63XX
-+	help
-+	  Watchdog driver for the built in watchdog hardware in Broadcom
-+	  BCM63xx SoC.
-+
-+	  To compile thi driver as a loadable module, choose M here.
-+	  The module will be called bcm63xx_wdt.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
--- /dev/null
-+++ b/drivers/watchdog/bcm63xx_wdt.c
-@@ -0,0 +1,354 @@
-+/*
-+ *  Broadcom BCM63xx SoC watchdog driver
-+ *
-+ *  Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com>
-+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or
-+ *  modify it under the terms of the GNU General Public License
-+ *  as published by the Free Software Foundation; either version
-+ *  2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/errno.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/reboot.h>
-+#include <linux/types.h>
-+#include <linux/uaccess.h>
-+#include <linux/watchdog.h>
-+#include <linux/timer.h>
-+#include <linux/jiffies.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/resource.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_timer.h>
-+
-+#define PFX KBUILD_MODNAME
-+
-+#define WDT_HZ		50000000 /* Fclk */
-+#define WDT_DEFAULT_TIME	30      /* seconds */
-+#define WDT_MAX_TIME		256     /* seconds */
-+
-+static struct {
-+	void __iomem *regs;
-+	struct timer_list timer;
-+	int default_ticks;
-+	unsigned long inuse;
-+	atomic_t ticks;
-+} bcm63xx_wdt_device;
-+
-+static int expect_close;
-+
-+static int wdt_time = WDT_DEFAULT_TIME;
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+/* HW functions */
-+static void bcm63xx_wdt_hw_start(void)
-+{
-+	bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG);
-+	bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+	bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+}
-+
-+static void bcm63xx_wdt_hw_stop(void)
-+{
-+	bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+	bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-+}
-+
-+static void bcm63xx_wdt_isr(void *data)
-+{
-+	struct pt_regs *regs = get_irq_regs();
-+
-+	die(PFX " fire", regs);
-+}
-+
-+static void bcm63xx_timer_tick(unsigned long unused)
-+{
-+	if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) {
-+		bcm63xx_wdt_hw_start();
-+		mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ);
-+	} else
-+		printk(KERN_CRIT PFX ": watchdog will restart system\n");
-+}
-+
-+static void bcm63xx_wdt_pet(void)
-+{
-+	atomic_set(&bcm63xx_wdt_device.ticks, wdt_time);
-+}
-+
-+static void bcm63xx_wdt_start(void)
-+{
-+	bcm63xx_wdt_pet();
-+	bcm63xx_timer_tick(0);
-+}
-+
-+static void bcm63xx_wdt_pause(void)
-+{
-+	del_timer_sync(&bcm63xx_wdt_device.timer);
-+	bcm63xx_wdt_hw_stop();
-+}
-+
-+static int bcm63xx_wdt_settimeout(int new_time)
-+{
-+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-+		return -EINVAL;
-+
-+	wdt_time = new_time;
-+
-+	return 0;
-+}
-+
-+static int bcm63xx_wdt_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse))
-+		return -EBUSY;
-+
-+	bcm63xx_wdt_start();
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int bcm63xx_wdt_release(struct inode *inode, struct file *file)
-+{
-+	if (expect_close == 42)
-+		bcm63xx_wdt_pause();
-+	else {
-+		printk(KERN_CRIT PFX
-+			": Unexpected close, not stopping watchdog!\n");
-+		bcm63xx_wdt_start();
-+	}
-+	clear_bit(0, &bcm63xx_wdt_device.inuse);
-+	expect_close = 0;
-+	return 0;
-+}
-+
-+static ssize_t bcm63xx_wdt_write(struct file *file, const char *data,
-+				size_t len, loff_t *ppos)
-+{
-+	if (len) {
-+		if (!nowayout) {
-+			size_t i;
-+
-+			/* In case it was set long ago */
-+			expect_close = 0;
-+
-+			for (i = 0; i != len; i++) {
-+				char c;
-+				if (get_user(c, data + i))
-+					return -EFAULT;
-+				if (c == 'V')
-+					expect_close = 42;
-+			}
-+		}
-+		bcm63xx_wdt_pet();
-+	}
-+	return len;
-+}
-+
-+static struct watchdog_info bcm63xx_wdt_info = {
-+	.identity       = PFX,
-+	.options        = WDIOF_SETTIMEOUT |
-+				WDIOF_KEEPALIVEPING |
-+				WDIOF_MAGICCLOSE,
-+};
-+
-+
-+static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
-+				unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+	int new_value, retval = -EINVAL;
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user(argp, &bcm63xx_wdt_info,
-+			sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0;
-+
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		return put_user(0, p);
-+
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(new_value, p))
-+			return -EFAULT;
-+
-+		if (new_value & WDIOS_DISABLECARD) {
-+			bcm63xx_wdt_pause();
-+			retval = 0;
-+		}
-+		if (new_value & WDIOS_ENABLECARD) {
-+			bcm63xx_wdt_start();
-+			retval = 0;
-+		}
-+
-+		return retval;
-+
-+	case WDIOC_KEEPALIVE:
-+		bcm63xx_wdt_pet();
-+		return 0;
-+
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(new_value, p))
-+			return -EFAULT;
-+
-+		if (bcm63xx_wdt_settimeout(new_value))
-+			return -EINVAL;
-+
-+		bcm63xx_wdt_pet();
-+
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(wdt_time, p);
-+
-+	default:
-+		return -ENOTTY;
-+
-+	}
-+}
-+
-+static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
-+				unsigned long code, void *unused)
-+{
-+	if (code == SYS_DOWN || code == SYS_HALT)
-+		bcm63xx_wdt_pause();
-+	return NOTIFY_DONE;
-+}
-+
-+static const struct file_operations bcm63xx_wdt_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= bcm63xx_wdt_write,
-+	.unlocked_ioctl	= bcm63xx_wdt_ioctl,
-+	.open		= bcm63xx_wdt_open,
-+	.release	= bcm63xx_wdt_release,
-+};
-+
-+static struct miscdevice bcm63xx_wdt_miscdev = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &bcm63xx_wdt_fops,
-+};
-+
-+static struct notifier_block bcm63xx_wdt_notifier = {
-+	.notifier_call = bcm63xx_wdt_notify_sys,
-+};
-+
-+
-+static int bcm63xx_wdt_probe(struct platform_device *pdev)
-+{
-+	int ret;
-+	struct resource *r;
-+
-+	setup_timer(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0L);
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!r) {
-+		printk(KERN_ERR PFX
-+			"failed to retrieve resources\n");
-+		return -ENODEV;
-+	}
-+
-+	bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start);
-+	if (!bcm63xx_wdt_device.regs) {
-+		printk(KERN_ERR PFX
-+			"failed to remap I/O resources\n");
-+		return -ENXIO;
-+	}
-+
-+	ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL);
-+	if (ret < 0) {
-+		printk(KERN_ERR PFX
-+			"failed to register wdt timer isr\n");
-+		goto unmap;
-+	}
-+
-+	if (bcm63xx_wdt_settimeout(wdt_time)) {
-+		bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME);
-+		printk(KERN_INFO PFX
-+			": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
-+			wdt_time);
-+	}
-+
-+	ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
-+	if (ret) {
-+		printk(KERN_ERR PFX
-+			"failed to register reboot_notifier\n");
-+		goto unregister_timer;
-+	}
-+
-+	ret = misc_register(&bcm63xx_wdt_miscdev);
-+	if (ret < 0) {
-+		printk(KERN_ERR PFX
-+			"failed to register watchdog device\n");
-+		goto unregister_reboot_notifier;
-+	}
-+
-+	printk(KERN_INFO PFX " started, timer margin: %d sec\n", WDT_DEFAULT_TIME);
-+
-+	return 0;
-+
-+unregister_reboot_notifier:
-+	unregister_reboot_notifier(&bcm63xx_wdt_notifier);
-+unregister_timer:
-+	bcm63xx_timer_unregister(TIMER_WDT_ID);
-+unmap:
-+	iounmap(bcm63xx_wdt_device.regs);
-+	return ret;
-+}
-+
-+static int bcm63xx_wdt_remove(struct platform_device *pdev)
-+{
-+	if (!nowayout)
-+		bcm63xx_wdt_pause();
-+
-+	misc_deregister(&bcm63xx_wdt_miscdev);
-+
-+	iounmap(bcm63xx_wdt_device.regs);
-+
-+	unregister_reboot_notifier(&bcm63xx_wdt_notifier);
-+	bcm63xx_timer_unregister(TIMER_WDT_ID);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bcm63xx_wdt = {
-+	.probe	= bcm63xx_wdt_probe,
-+	.remove = bcm63xx_wdt_remove,
-+	.driver = {
-+		.name = "bcm63xx-wdt",
-+	}
-+};
-+
-+static int __init bcm63xx_wdt_init(void)
-+{
-+	return platform_driver_register(&bcm63xx_wdt);
-+}
-+
-+static void __exit bcm63xx_wdt_exit(void)
-+{
-+	platform_driver_unregister(&bcm63xx_wdt);
-+}
-+
-+module_init(bcm63xx_wdt_init);
-+module_exit(bcm63xx_wdt_exit);
-+
-+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:bcm63xx-wdt");
--- a/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/040-bcm963xx_flashmap.patch
@ -1,389 +0,0 @@
-From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
---
- drivers/mtd/maps/Kconfig  |    7 +++++++
- drivers/mtd/maps/Makefile |    1 +
- drivers/mtd/redboot.c     |   13 ++++++++++---
- 3 files changed, 18 insertions(+), 3 deletions(-)
-
--- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -251,6 +251,13 @@ config MTD_NETtel
- 	help
- 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
- 
-+config MTD_BCM963XX
-+        tristate "BCM963xx Flash device"
-+        depends on MIPS && BCM63XX
-+        help
-+	  Flash memory access on BCM963xx boards. Currently only works with
-+	  RedBoot and CFE.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
- 	return 1;
- }
- 
-static int parse_redboot_partitions(struct mtd_info *master,
-+int parse_redboot_partitions(struct mtd_info *master,
-                              struct mtd_partition **pparts,
-                              unsigned long fis_origin)
- {
-@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
- 		goto out;
- 	}
- 
-+	if (!fis_origin) {
-+		for (i = 0; i < numslots; i++) {
-+			if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+				fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+			}
-+		}
-+	}
-+
- 	for (i = 0; i < numslots; i++) {
- 		struct fis_list *new_fl, **prev;
- 
-@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
- 		new_fl->img = &buf[i];
-                 if (fis_origin) {
-                         buf[i].flash_base -= fis_origin;
-                } else {
-                        buf[i].flash_base &= master->size-1;
-                 }
-+		buf[i].flash_base &= (master->size << 1) - 1;
- 
- 		/* I'm sure the JFFS2 code has done me permanent damage.
- 		 * I now think the following is _normal_
--- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -59,3 +59,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-asy
- obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
- obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
-+obj-$(CONFIG_MTD_BCM963XX)	+= bcm963xx-flash.o
--- /dev/null
-+++ b/drivers/mtd/maps/bcm963xx-flash.c
-@@ -0,0 +1,276 @@
-+/*
-+ * Copyright (C) 2006-2008  Florian Fainelli <florian@openwrt.org>
-+ * 			    Mike Albon <malbon@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/platform_device.h>
-+#include <linux/magic.h>
-+#include <linux/jffs2.h>
-+
-+#include <bcm_tag.h>
-+#include <asm/io.h>
-+
-+#define BUSWIDTH 2                     /* Buswidth */
-+#define EXTENDED_SIZE 0xBFC00000       /* Extended flash address */
-+
-+#define PFX KBUILD_MODNAME ": "
-+
-+struct squashfs_super_block {
-+	__le32 s_magic;
-+	__le32 pad0[9];
-+	__le64 bytes_used;
-+};
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin);
-+static struct mtd_partition *parsed_parts;
-+
-+static struct mtd_info *bcm963xx_mtd_info;
-+
-+static struct map_info bcm963xx_map = {
-+       .name		= "bcm963xx",
-+       .bankwidth	= BUSWIDTH,
-+};
-+
-+static int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts)
-+{
-+	int nrparts = 3, curpart = 0; /* CFE,NVRAM and global LINUX are always present. */
-+	struct bcm_tag *buf;
-+	struct mtd_partition *parts;
-+	int ret;
-+	size_t retlen;
-+	unsigned int rootfsaddr, kerneladdr, spareaddr;
-+	unsigned int rootfslen, kernellen, sparelen;
-+	int namelen = 0;
-+	int i, offset;
-+	char *boardid;
-+	char *tagversion;
-+
-+	/* Allocate memory for buffer */
-+	buf = vmalloc(sizeof(struct bcm_tag));
-+	if (!buf)
-+		return -ENOMEM;
-+
-+	/* Get the tag */
-+	ret = master->read(master, master->erasesize, sizeof(struct bcm_tag), &retlen, (void *)buf);
-+	if (retlen != sizeof(struct bcm_tag)){
-+		vfree(buf);
-+		return -EIO;
-+	}
-+
-+	sscanf(buf->kernelAddress, "%u", &kerneladdr);
-+	sscanf(buf->kernelLength, "%u", &kernellen);
-+	rootfslen = *(uint32_t *)(&(buf->rootLength[0]));
-+	tagversion = &(buf->tagVersion[0]);
-+	boardid = &(buf->boardid[0]);
-+
-+	printk(KERN_INFO PFX "CFE boot tag found with version %s and board type %s\n",tagversion, boardid);
-+
-+	kerneladdr = kerneladdr - EXTENDED_SIZE;
-+	rootfsaddr = kerneladdr + kernellen;
-+
-+	rootfslen = ( ( rootfslen % master->erasesize ) > 0 ? (((rootfslen / master->erasesize) + 1 ) * master->erasesize) : rootfslen);
-+
-+	spareaddr = rootfsaddr + rootfslen;
-+	sparelen = master->size - spareaddr - master->erasesize;
-+
-+	/* Determine number of partitions */
-+	namelen = 8;
-+	if (rootfslen > 0){
-+		nrparts++;
-+		namelen =+ 6;
-+	};
-+	if (kernellen > 0) {
-+		nrparts++;
-+		namelen =+ 6;
-+	};
-+
-+	/* Ask kernel for more memory */
-+	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-+	if (!parts) {
-+		vfree(buf);
-+		return -ENOMEM;
-+	};
-+
-+	/* Start building partition list */
-+	parts[curpart].name = "CFE";
-+	parts[curpart].offset = 0;
-+	parts[curpart].size = master->erasesize;
-+	curpart++;
-+
-+	if (kernellen > 0) {
-+		parts[curpart].name = "kernel";
-+		parts[curpart].offset = kerneladdr;
-+		parts[curpart].size = kernellen;
-+		curpart++;
-+	};
-+
-+	if (rootfslen > 0) {
-+		parts[curpart].name = "rootfs";
-+		parts[curpart].offset = rootfsaddr;
-+		parts[curpart].size = rootfslen;
-+		if (sparelen > 0)
-+			parts[curpart].size += sparelen;
-+		curpart++;
-+	};
-+
-+	parts[curpart].name = "nvram";
-+	parts[curpart].offset = master->size - master->erasesize;
-+	parts[curpart].size = master->erasesize;
-+
-+	/* Global partition "linux" to make easy firmware upgrade */
-+	curpart++;
-+	parts[curpart].name = "linux";
-+	parts[curpart].offset = parts[0].size;
-+	parts[curpart].size = master->size - parts[0].size - parts[3].size;
-+
-+	for (i = 0; i < nrparts; i++)
-+		printk(KERN_INFO PFX "Partition %d is %s offset %lx and length %lx\n", i, parts[i].name, (long unsigned int)(parts[i].offset), (long unsigned int)(parts[i].size));
-+
-+ 	printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n", spareaddr, sparelen);
-+	*pparts = parts;
-+	vfree(buf);
-+
-+	return nrparts;
-+};
-+
-+static int bcm963xx_detect_cfe(struct mtd_info *master)
-+{
-+	int idoffset = 0x4e0;
-+	static char idstring[8] = "CFE1CFE1";
-+	char buf[9];
-+	int ret;
-+	size_t retlen;
-+
-+	ret = master->read(master, idoffset, 8, &retlen, (void *)buf);
-+	buf[retlen] = 0;
-+	printk(KERN_INFO PFX "Read Signature value of %s\n", buf);
-+
-+	return strncmp(idstring, buf, 8);
-+}
-+
-+static int bcm963xx_probe(struct platform_device *pdev)
-+{
-+	int err = 0;
-+	int parsed_nr_parts = 0;
-+	char *part_type;
-+	struct resource *r;
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	bcm963xx_map.phys = r->start;
-+	bcm963xx_map.size = (r->end - r->start) + 1;
-+	bcm963xx_map.virt = ioremap(r->start, r->end - r->start + 1);
-+
-+	if (!bcm963xx_map.virt) {
-+		printk(KERN_ERR PFX "Failed to ioremap\n");
-+		return -EIO;
-+	}
-+	printk(KERN_INFO PFX "0x%08lx at 0x%08x\n", bcm963xx_map.size, bcm963xx_map.phys);
-+
-+	simple_map_init(&bcm963xx_map);
-+
-+	bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map);
-+	if (!bcm963xx_mtd_info) {
-+		printk(KERN_ERR PFX "Failed to probe using CFI\n");
-+		err = -EIO;
-+		goto err_probe;
-+	}
-+
-+	bcm963xx_mtd_info->owner = THIS_MODULE;
-+
-+	/* This is mutually exclusive */
-+	if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) {
-+		printk(KERN_INFO PFX "CFE bootloader detected\n");
-+		if (parsed_nr_parts == 0) {
-+			int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts);
-+			if (ret > 0) {
-+				part_type = "CFE";
-+				parsed_nr_parts = ret;
-+			}
-+		}
-+	} else {
-+		printk(KERN_INFO PFX "assuming RedBoot bootloader\n");
-+		if (bcm963xx_mtd_info->size > 0x00400000) {
-+			printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size);
-+			bcm963xx_map.virt = (u32)(EXTENDED_SIZE);
-+		}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+		if (parsed_nr_parts == 0) {
-+			int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0);
-+			if (ret > 0) {
-+				part_type = "RedBoot";
-+				parsed_nr_parts = ret;
-+			}
-+		}
-+#endif
-+	}
-+
-+	return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts);
-+
-+err_probe:
-+	iounmap(bcm963xx_map.virt);
-+	return err;
-+}
-+
-+static int bcm963xx_remove(struct platform_device *pdev)
-+{
-+	if (bcm963xx_mtd_info) {
-+		del_mtd_partitions(bcm963xx_mtd_info);
-+		map_destroy(bcm963xx_mtd_info);
-+	}
-+
-+	if (bcm963xx_map.virt) {
-+		iounmap(bcm963xx_map.virt);
-+		bcm963xx_map.virt = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver bcm63xx_mtd_dev = {
-+	.probe	= bcm963xx_probe,
-+	.remove = bcm963xx_remove,
-+	.driver = {
-+		.name	= "bcm963xx-flash",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init bcm963xx_mtd_init(void)
-+{
-+	return platform_driver_register(&bcm63xx_mtd_dev);
-+}
-+
-+static void __exit bcm963xx_mtd_exit(void)
-+{
-+	platform_driver_unregister(&bcm63xx_mtd_dev);
-+}
-+
-+module_init(bcm963xx_mtd_init);
-+module_exit(bcm963xx_mtd_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Broadcom BCM63xx MTD partition parser/mapping for CFE and RedBoot");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>");
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -816,20 +816,6 @@ void __init board_setup(void)
- 		panic("unexpected CPU for bcm963xx board");
- }
- 
-static struct mtd_partition mtd_partitions[] = {
-	{
-		.name		= "cfe",
-		.offset		= 0x0,
-		.size		= 0x40000,
-	}
-};
-
-static struct physmap_flash_data flash_data = {
-	.width			= 2,
-	.nr_parts		= ARRAY_SIZE(mtd_partitions),
-	.parts			= mtd_partitions,
-};
-
- static struct resource mtd_resources[] = {
- 	{
- 		.start		= 0,	/* filled at runtime */
-@@ -839,12 +825,9 @@ static struct resource mtd_resources[] =
- };
- 
- static struct platform_device mtd_dev = {
-	.name			= "physmap-flash",
-+	.name			= "bcm963xx-flash",
- 	.resource		= mtd_resources,
- 	.num_resources		= ARRAY_SIZE(mtd_resources),
-	.dev			= {
-		.platform_data	= &flash_data,
-	},
- };
- 
- static struct gpio_led_platform_data bcm63xx_led_data;
--- a/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/070_bcm63xx_enet_vlan_incoming_fixed.patch
@ -1,11 +0,0 @@
--- a/drivers/net/bcm63xx_enet.c
-+++ b/drivers/net/bcm63xx_enet.c
-@@ -1520,7 +1520,7 @@ static int compute_hw_mtu(struct bcm_ene
- 	actual_mtu = mtu;
- 
- 	/* add ethernet header + vlan tag size */
-	actual_mtu += VLAN_ETH_HLEN;
-+	actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
- 
- 	if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- 		return -EINVAL;
--- a/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/100-reset_buttons.patch
@ -1,98 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -296,6 +298,16 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_96348gw = {
-@@ -354,6 +366,16 @@ static struct board_info __initdata boar
- 			.active_low	= 1,
- 		},
- 	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_FAST2404 = {
-@@ -838,12 +860,23 @@ static struct platform_device bcm63xx_gp
- 	.dev.platform_data	= &bcm63xx_led_data,
- };
- 
-+static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = {
-+	.poll_interval  = 20,
-+};
-+
-+static struct platform_device bcm63xx_gpio_buttons_device = {
-+	.name		= "gpio-buttons",
-+	.id		= 0,
-+	.dev.platform_data = &bcm63xx_gpio_buttons_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
- 	u32 val;
-+	int button_count = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -888,5 +921,16 @@ int __init board_register_devices(void)
- 
- 	platform_device_register(&bcm63xx_gpio_leds);
- 
-+	/* count number of BUTTONs defined by this device */
-+	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+		button_count++;
-+
-+	if (button_count) {
-+		bcm63xx_gpio_buttons_data.nbuttons = button_count;
-+		bcm63xx_gpio_buttons_data.buttons = board.buttons;
-+
-+		platform_device_register(&bcm63xx_gpio_buttons_device);
-+	}
-+
- 	return 0;
- }
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,9 @@ struct board_info {
- 
- 	/* GPIO LEDs */
- 	struct gpio_led leds[5];
-+
-+	/* Buttons */
-+	struct gpio_button buttons[2];
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
--- a/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/110-gpiodev.patch
@ -1,22 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -852,6 +852,10 @@ static struct platform_device mtd_dev =
- 	.num_resources		= ARRAY_SIZE(mtd_resources),
- };
- 
-+static struct resource gpiodev_resource = {
-+	.start			= 0xFFFFFFFF,
-+};
-+
- static struct gpio_led_platform_data bcm63xx_led_data;
- 
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -916,6 +920,8 @@ int __init board_register_devices(void)
- 
- 	platform_device_register(&mtd_dev);
- 
-+	platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
-+
- 	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
- 	bcm63xx_led_data.leds = board.leds;
- 
--- a/target/linux/brcm63xx/patches-2.6.35/120-spi-bitbang-norxtx-support.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/120-spi-bitbang-norxtx-support.patch
@ -1,237 +0,0 @@
-From 04bb2a031cf95b34b7432dd47b318a932a895b4c Mon Sep 17 00:00:00 2001
-From: Marek Szyprowski <m.szyprowski@samsung.com>
-Date: Wed, 30 Jun 2010 14:27:32 -0600
-Subject: [PATCH] spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes
-
-This patch adds a new flags argument to bitbang_txrx_be_cpha0 and
-bitbang_txrx_be_cpha1 transfer functions. This enables support for
-SPI_MASTER_NO_{TX,RX} transfer modes. The change should have no impact
-on speed of the existing drivers. bitbank_txrx_* functions are usually
-inlined into the drivers. When the argument is equal to constant zero,
-the optimizer would be able to eliminate the dead code (flags checks)
-easily. Tested on ARM and GCC 4.4.x and in all cases the checks were
-eliminated in the inlined function.
-
-Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
-Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
-Acked-by: David Brownell <dbrownell@users.sourceforge.net>
-Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
- drivers/spi/spi_bitbang_txrx.h |   16 ++++++++++------
- drivers/spi/spi_butterfly.c    |    2 +-
- drivers/spi/spi_gpio.c         |    8 ++++----
- drivers/spi/spi_lm70llp.c      |    2 +-
- drivers/spi/spi_s3c24xx_gpio.c |    8 ++++----
- drivers/spi/spi_sh_sci.c       |    8 ++++----
- 6 files changed, 24 insertions(+), 20 deletions(-)
-
--- a/drivers/spi/spi_bitbang_txrx.h
-+++ b/drivers/spi/spi_bitbang_txrx.h
-@@ -44,7 +44,7 @@
- 
- static inline u32
- bitbang_txrx_be_cpha0(struct spi_device *spi,
-		unsigned nsecs, unsigned cpol,
-+		unsigned nsecs, unsigned cpol, unsigned flags,
- 		u32 word, u8 bits)
- {
- 	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
-@@ -53,7 +53,8 @@ bitbang_txrx_be_cpha0(struct spi_device
- 	for (word <<= (32 - bits); likely(bits); bits--) {
- 
- 		/* setup MSB (to slave) on trailing edge */
-		setmosi(spi, word & (1 << 31));
-+		if ((flags & SPI_MASTER_NO_TX) == 0)
-+			setmosi(spi, word & (1 << 31));
- 		spidelay(nsecs);	/* T(setup) */
- 
- 		setsck(spi, !cpol);
-@@ -61,7 +62,8 @@ bitbang_txrx_be_cpha0(struct spi_device
- 
- 		/* sample MSB (from slave) on leading edge */
- 		word <<= 1;
-		word |= getmiso(spi);
-+		if ((flags & SPI_MASTER_NO_RX) == 0)
-+			word |= getmiso(spi);
- 		setsck(spi, cpol);
- 	}
- 	return word;
-@@ -69,7 +71,7 @@ bitbang_txrx_be_cpha0(struct spi_device
- 
- static inline u32
- bitbang_txrx_be_cpha1(struct spi_device *spi,
-		unsigned nsecs, unsigned cpol,
-+		unsigned nsecs, unsigned cpol, unsigned flags,
- 		u32 word, u8 bits)
- {
- 	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
-@@ -79,7 +81,8 @@ bitbang_txrx_be_cpha1(struct spi_device
- 
- 		/* setup MSB (to slave) on leading edge */
- 		setsck(spi, !cpol);
-		setmosi(spi, word & (1 << 31));
-+		if ((flags & SPI_MASTER_NO_TX) == 0)
-+			setmosi(spi, word & (1 << 31));
- 		spidelay(nsecs); /* T(setup) */
- 
- 		setsck(spi, cpol);
-@@ -87,7 +90,8 @@ bitbang_txrx_be_cpha1(struct spi_device
- 
- 		/* sample MSB (from slave) on trailing edge */
- 		word <<= 1;
-		word |= getmiso(spi);
-+		if ((flags & SPI_MASTER_NO_RX) == 0)
-+			word |= getmiso(spi);
- 	}
- 	return word;
- }
--- a/drivers/spi/spi_butterfly.c
-+++ b/drivers/spi/spi_butterfly.c
-@@ -156,7 +156,7 @@ butterfly_txrx_word_mode0(struct spi_dev
- 		unsigned nsecs,
- 		u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- /*----------------------------------------------------------------------*/
--- a/drivers/spi/spi_gpio.c
-+++ b/drivers/spi/spi_gpio.c
-@@ -157,25 +157,25 @@ static inline void spidelay(unsigned nse
- static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
- 		unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
- 		unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
- 		unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
- 		unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
- }
- 
- /*----------------------------------------------------------------------*/
--- a/drivers/spi/spi_lm70llp.c
-+++ b/drivers/spi/spi_lm70llp.c
-@@ -191,7 +191,7 @@ static void lm70_chipselect(struct spi_d
-  */
- static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- static void spi_lm70llp_attach(struct parport *p)
--- a/drivers/spi/spi_s3c24xx_gpio.c
-+++ b/drivers/spi/spi_s3c24xx_gpio.c
-@@ -64,25 +64,25 @@ static inline u32 getmiso(struct spi_dev
- static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
- }
- 
- static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
- }
- 
- 
--- a/drivers/spi/spi_sh_sci.c
-+++ b/drivers/spi/spi_sh_sci.c
-@@ -83,25 +83,25 @@ static inline u32 getmiso(struct spi_dev
- static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
- }
- 
- static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
- 				      unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
- }
- 
- static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
--- a/drivers/spi/spi_gpio_old.c
-+++ b/drivers/spi/spi_gpio_old.c
-@@ -80,25 +80,25 @@ static inline void do_spidelay(struct sp
- static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
- 			       unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
- 			       unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
- 			       unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
- }
- 
- static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
- 			       unsigned nsecs, u32 word, u8 bits)
- {
-	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
- }
- 
- static void spi_gpio_chipselect(struct spi_device *dev, int on)
--- a/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/121-spi-gpio-norxtx-support.patch
@ -1,217 +0,0 @@
-From 3c8e1a84fd6b984a7bce8816db2e3defc57bbfe4 Mon Sep 17 00:00:00 2001
-From: Marek Szyprowski <m.szyprowski@samsung.com>
-Date: Wed, 30 Jun 2010 14:27:37 -0600
-Subject: [PATCH] spi/spi-gpio: add support for controllers without MISO or MOSI pin
-
-There are some boards that do not strictly follow SPI standard and use
-only 3 wires (SCLK, MOSI or MISO, SS) for connecting some simple auxiliary
-chips and controls them with GPIO based 'spi controller'. In this
-configuration the MISO or MOSI line is missing (it is not required if the
-chip does not transfer any data back to host or host only reads data from
-chip).
-
-This patch adds support for such non-standard configuration in GPIO-based
-SPI controller. It has been tested in configuration without MISO pin.
-
-Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
-Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
-Acked-by: David Brownell <dbrownell@users.sourceforge.net>
-Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
- drivers/spi/spi_gpio.c       |  101 ++++++++++++++++++++++++++++++++++-------
- include/linux/spi/spi_gpio.h |    5 ++
- 2 files changed, 88 insertions(+), 18 deletions(-)
-
--- a/drivers/spi/spi_gpio.c
-+++ b/drivers/spi/spi_gpio.c
-@@ -178,6 +178,44 @@ static u32 spi_gpio_txrx_word_mode3(stru
- 	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
- }
- 
-+/*
-+ * These functions do not call setmosi or getmiso if respective flag
-+ * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
-+ * call when such pin is not present or defined in the controller.
-+ * A separate set of callbacks is defined to get highest possible
-+ * speed in the generic case (when both MISO and MOSI lines are
-+ * available), as optimiser will remove the checks when argument is
-+ * constant.
-+ */
-+
-+static u32 spi_gpio_spec_txrx_word_mode0(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	unsigned flags = spi->master->flags;
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, flags, word, bits);
-+}
-+
-+static u32 spi_gpio_spec_txrx_word_mode1(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	unsigned flags = spi->master->flags;
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, flags, word, bits);
-+}
-+
-+static u32 spi_gpio_spec_txrx_word_mode2(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	unsigned flags = spi->master->flags;
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, flags, word, bits);
-+}
-+
-+static u32 spi_gpio_spec_txrx_word_mode3(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	unsigned flags = spi->master->flags;
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, flags, word, bits);
-+}
-+
- /*----------------------------------------------------------------------*/
- 
- static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
-@@ -243,19 +281,30 @@ static int __devinit spi_gpio_alloc(unsi
- }
- 
- static int __devinit
-spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
-+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label,
-+	u16 *res_flags)
- {
- 	int value;
- 
- 	/* NOTE:  SPI_*_GPIO symbols may reference "pdata" */
- 
-	value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
-	if (value)
-		goto done;
-
-	value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
-	if (value)
-		goto free_mosi;
-+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI) {
-+		value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
-+		if (value)
-+			goto done;
-+	} else {
-+		/* HW configuration without MOSI pin */
-+		*res_flags |= SPI_MASTER_NO_TX;
-+	}
-+
-+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO) {
-+		value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
-+		if (value)
-+			goto free_mosi;
-+	} else {
-+		/* HW configuration without MISO pin */
-+		*res_flags |= SPI_MASTER_NO_RX;
-+	}
- 
- 	value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
- 	if (value)
-@@ -264,9 +313,11 @@ spi_gpio_request(struct spi_gpio_platfor
- 	goto done;
- 
- free_miso:
-	gpio_free(SPI_MISO_GPIO);
-+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
-+		gpio_free(SPI_MISO_GPIO);
- free_mosi:
-	gpio_free(SPI_MOSI_GPIO);
-+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
-+		gpio_free(SPI_MOSI_GPIO);
- done:
- 	return value;
- }
-@@ -277,6 +328,7 @@ static int __devinit spi_gpio_probe(stru
- 	struct spi_master		*master;
- 	struct spi_gpio			*spi_gpio;
- 	struct spi_gpio_platform_data	*pdata;
-+	u16 master_flags = 0;
- 
- 	pdata = pdev->dev.platform_data;
- #ifdef GENERIC_BITBANG
-@@ -284,7 +336,7 @@ static int __devinit spi_gpio_probe(stru
- 		return -ENODEV;
- #endif
- 
-	status = spi_gpio_request(pdata, dev_name(&pdev->dev));
-+	status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
- 	if (status < 0)
- 		return status;
- 
-@@ -300,6 +352,7 @@ static int __devinit spi_gpio_probe(stru
- 	if (pdata)
- 		spi_gpio->pdata = *pdata;
- 
-+	master->flags = master_flags;
- 	master->bus_num = pdev->id;
- 	master->num_chipselect = SPI_N_CHIPSEL;
- 	master->setup = spi_gpio_setup;
-@@ -307,10 +360,18 @@ static int __devinit spi_gpio_probe(stru
- 
- 	spi_gpio->bitbang.master = spi_master_get(master);
- 	spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
-	spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
-	spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
-	spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
-	spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
-+
-+	if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
-+	} else {
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
-+		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
-+	}
- 	spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
- 	spi_gpio->bitbang.flags = SPI_CS_HIGH;
- 
-@@ -318,8 +379,10 @@ static int __devinit spi_gpio_probe(stru
- 	if (status < 0) {
- 		spi_master_put(spi_gpio->bitbang.master);
- gpio_free:
-		gpio_free(SPI_MISO_GPIO);
-		gpio_free(SPI_MOSI_GPIO);
-+		if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
-+			gpio_free(SPI_MISO_GPIO);
-+		if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
-+			gpio_free(SPI_MOSI_GPIO);
- 		gpio_free(SPI_SCK_GPIO);
- 		spi_master_put(master);
- 	}
-@@ -342,8 +405,10 @@ static int __devexit spi_gpio_remove(str
- 
- 	platform_set_drvdata(pdev, NULL);
- 
-	gpio_free(SPI_MISO_GPIO);
-	gpio_free(SPI_MOSI_GPIO);
-+	if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
-+		gpio_free(SPI_MISO_GPIO);
-+	if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
-+		gpio_free(SPI_MOSI_GPIO);
- 	gpio_free(SPI_SCK_GPIO);
- 
- 	return status;
--- a/include/linux/spi/spi_gpio.h
-+++ b/include/linux/spi/spi_gpio.h
-@@ -29,11 +29,16 @@
-  * SPI_GPIO_NO_CHIPSELECT to the controller_data:
-  *		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
-  *
-+ * If the MISO or MOSI pin is not available then it should be set to
-+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
-+ *
-  * If the bitbanged bus is later switched to a "native" controller,
-  * that platform_device and controller_data should be removed.
-  */
- 
- #define SPI_GPIO_NO_CHIPSELECT		((unsigned long)-1l)
-+#define SPI_GPIO_NO_MISO		((unsigned long)-1l)
-+#define SPI_GPIO_NO_MOSI		((unsigned long)-1l)
- 
- /**
-  * struct spi_gpio_platform_data - parameter for bitbanged SPI master
--- a/target/linux/brcm63xx/patches-2.6.35/141-led_count.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/141-led_count.patch
@ -1,23 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -881,6 +881,7 @@ int __init board_register_devices(void)
- {
- 	u32 val;
- 	int button_count = 0;
-+	int led_count = 0;
- 
- 	if (board.has_uart0)
- 		bcm63xx_uart_register(0);
-@@ -922,7 +923,11 @@ int __init board_register_devices(void)
- 
- 	platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1);
- 
-	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+	/* count number of LEDs defined by this device */
-+	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+	  led_count++;
-+
-+	bcm63xx_led_data.num_leds = led_count;
- 	bcm63xx_led_data.leds = board.leds;
- 
- 	platform_device_register(&bcm63xx_gpio_leds);
--- a/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/150-alice_gate2_leds.patch
@ -1,113 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -588,6 +588,99 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- 	.has_ehci0 = 1,
-+
-+	.leds = {
-+		/*Each led on alice gate is bi-color */
-+		{
-+			.name		= "power:red",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:red",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:green",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 23,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:green",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:red",
-+			.gpio		= 25,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:green",
-+			.gpio		= 24,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr1:red",
-+			.gpio		= 27,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr1:green",
-+			.gpio		= 26,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr2:red",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usr2:green",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc           = "reset",
-+			.gpio           = 37,
-+			.active_low     = 1,
-+			.type           = EV_KEY,
-+			.code           = KEY_RESTART,
-+			.threshold      = 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
- };
- 
- static struct board_info __initdata board_DWVS0 = {
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -56,7 +56,7 @@ struct board_info {
- 	struct bcm63xx_dsp_platform_data dsp;
- 
- 	/* GPIO LEDs */
-	struct gpio_led leds[5];
-+	struct gpio_led leds[14];
- 
- 	/* Buttons */
- 	struct gpio_button buttons[2];
--- a/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/170-board_livebox.patch
@ -1,251 +0,0 @@
--- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
- 	select SSB
-        help
- 
-+config BOARD_LIVEBOX
-+	bool "Inventel Livebox(es) boards"
-+	select SSB
-+	help
-+	 Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
--- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
- 
- EXTRA_CFLAGS += -Werror
--- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,228 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/gpio_buttons.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX	"board_livebox: "
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox = {
-+	.name				= "Livebox",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+	.has_ehci0			= 1,
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+	&board_livebox
-+#endif
-+};
-+
-+/*
-+ * early init callback
-+ */
-+void __init board_prom_init(void)
-+{
-+	u32 val;
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+
-+	/* assume board is a Livebox */
-+	memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+	/* setup pin multiplexing depending on board enabled device,
-+	 * this has to be done this early since PCI init is done
-+	 * inside arch_initcall */
-+	val = 0;
-+
-+	if (board.has_pci) {
-+		bcm63xx_pci_enabled = 1;
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G2_PCI;
-+	}
-+
-+	if (board.has_pccard) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+	}
-+
-+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+		if (BCMCPU_IS_6348())
-+			val |= GPIO_MODE_6348_G3_EXT_MII |
-+				GPIO_MODE_6348_G0_EXT_MII;
-+	}
-+
-+	bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+	if (!board.name[0])
-+		panic("unable to detect bcm963xx board");
-+	printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+	/* make sure we're running on expected cpu */
-+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+		panic("unexpected CPU for bcm963xx board");
-+}
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+	return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+
-+static int board_get_mac_address(u8 *mac)
-+{
-+	u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-+	u8 *p;
-+	int count;
-+
-+	memcpy(mac, default_mac, ETH_ALEN);
-+
-+	p = mac + ETH_ALEN - 1;
-+	count = mac_addr_used;
-+
-+	while (count--) {
-+		do {
-+			(*p)++;
-+			if (*p != 0)
-+				break;
-+			p--;
-+		} while (p != mac);
-+	}
-+
-+	if (p == mac) {
-+		printk(KERN_ERR PFX "unable to fetch mac address\n");
-+		return -ENODEV;
-+	}
-+        mac_addr_used++;
-+
-+	return 0;
-+}
-+
-+static struct resource mtd_resources[] = {
-+	{
-+		.start          = 0,    /* filled at runtime */
-+		.end            = 0,    /* filled at runtime */
-+		.flags          = IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct platform_device mtd_dev = {
-+	.name                   = "bcm963xx-flash",
-+	.resource               = mtd_resources,
-+	.num_resources          = ARRAY_SIZE(mtd_resources),
-+};
-+
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+	u32 val;
-+
-+	if (board.has_uart0)
-+		bcm63xx_uart_register(0);
-+
-+	if (board.has_pccard)
-+		bcm63xx_pcmcia_register();
-+
-+	if (board.has_enet0 &&
-+	    !board_get_mac_address(board.enet0.mac_addr))
-+		bcm63xx_enet_register(0, &board.enet0);
-+
-+	if (board.has_enet1 &&
-+	    !board_get_mac_address(board.enet1.mac_addr))
-+		bcm63xx_enet_register(1, &board.enet1);
-+
-+	if (board.has_ohci0)
-+		bcm63xx_ohci_register();
-+
-+	if (board.has_ehci0)
-+		bcm63xx_ehci_register();
-+
-+
-+	/* read base address of boot chip select (0) */
-+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+	val &= MPI_CSBASE_BASE_MASK;
-+	mtd_resources[0].start = val;
-+	mtd_resources[0].end = 0x1FFFFFFF;
-+
-+	platform_device_register(&mtd_dev);
-+
-+	return 0;
-+}
-+
--- a/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/180-udc_preliminary_support.patch
@ -1,243 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -29,6 +29,7 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_udc.h>
- #include <board_bcm963xx.h>
- 
- #define PFX	"board_bcm963xx: "
-@@ -400,6 +401,8 @@ static struct board_info __initdata boar
- 	.has_ohci0			= 1,
- 	.has_pccard			= 1,
- 	.has_ehci0			= 1,
-+
-+	.has_udc0			= 1,
- };
- 
- static struct board_info __initdata board_rta1025w_16 = {
-@@ -1002,6 +1005,9 @@ int __init board_register_devices(void)
- 	if (board.has_dsp)
- 		bcm63xx_dsp_register(&board.dsp);
- 
-+	if (board.has_udc0)
-+		bcm63xx_udc_register();
-+
- 	/* read base address of boot chip select (0) */
- 	if (BCMCPU_IS_6345())
- 		val = 0x1fc00000;
--- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-udc.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2009	Henk Vergonet <Henk.Vergonet@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+
-+static struct resource udc_resources[] = {
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.end		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_MEM,
-+	},
-+	{
-+		.start		= -1, /* filled at runtime */
-+		.flags		= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static u64 udc_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_udc_device = {
-+	.name		= "bcm63xx-udc",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(udc_resources),
-+	.resource	= udc_resources,
-+	.dev		= {
-+		.dma_mask		= &udc_dmamask,
-+		.coherent_dma_mask	= 0xffffffff,
-+	},
-+};
-+
-+int __init bcm63xx_udc_register(void)
-+{
-+	if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
-+		return 0;
-+
-+	udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
-+	udc_resources[0].end = udc_resources[0].start;
-+	udc_resources[0].end += RSET_UDC_SIZE - 1;
-+	udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
-+	return platform_device_register(&bcm63xx_udc_device);
-+}
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE		(0xdeadbeef)
- #define BCM_6338_GPIO_BASE		(0xfffe0400)
- #define BCM_6338_SPI_BASE		(0xfffe0c00)
-#define BCM_6338_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6338_UDC0_BASE		(0xfffe3000)
- #define BCM_6338_USBDMA_BASE		(0xfffe2400)
- #define BCM_6338_OHCI0_BASE		(0xdeadbeef)
- #define BCM_6338_OHCI_PRIV_BASE		(0xfffe3000)
-@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE		(0xdeadbeef)
- #define BCM_6345_GPIO_BASE		(0xfffe0400)
- #define BCM_6345_SPI_BASE		(0xdeadbeef)
-#define BCM_6345_UDC0_BASE		(0xdeadbeef)
-+#define BCM_6345_UDC0_BASE		(0xfffe2100)
- #define BCM_6345_USBDMA_BASE		(0xfffe2800)
- #define BCM_6345_ENET0_BASE		(0xfffe1800)
- #define BCM_6345_ENETDMA_BASE		(0xfffe2800)
-@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE		(0xfffe0120)
- #define BCM_6358_GPIO_BASE		(0xfffe0080)
- #define BCM_6358_SPI_BASE		(0xdeadbeef)
-#define BCM_6358_UDC0_BASE		(0xfffe0800)
-+#define BCM_6358_UDC0_BASE		(0xfffe0400)
- #define BCM_6358_OHCI0_BASE		(0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
- #define BCM_6358_USBH_PRIV_BASE		(0xfffe1500)
-@@ -444,6 +444,7 @@ enum bcm63xx_irq {
- 	IRQ_UART0,
- 	IRQ_UART1,
- 	IRQ_DSL,
-+	IRQ_UDC0,
- 	IRQ_ENET0,
- 	IRQ_ENET1,
- 	IRQ_ENET_PHY,
-@@ -486,7 +487,7 @@ enum bcm63xx_irq {
- #define BCM_6345_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6345_DSL_IRQ		(IRQ_INTERNAL_BASE + 3)
- #define BCM_6345_ATM_IRQ		(IRQ_INTERNAL_BASE + 4)
-#define BCM_6345_USB_IRQ		(IRQ_INTERNAL_BASE + 5)
-+#define BCM_6345_UDC0_IRQ		(IRQ_INTERNAL_BASE + 5)
- #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
- #define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
-@@ -508,10 +509,17 @@ enum bcm63xx_irq {
- #define BCM_6348_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
- #define BCM_6348_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
-+#define BCM_6348_UDC0_IRQ		(IRQ_INTERNAL_BASE + 6)
- #define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
- #define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
-+#define BCM_6348_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 14)
-+#define BCM_6348_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 15)
-+#define BCM_6348_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 16)
-+#define BCM_6348_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 17)
-+#define BCM_6348_USB_ISO_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 18)
-+#define BCM_6348_USB_ISO_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 19)
- #define BCM_6348_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 20)
- #define BCM_6348_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 21)
- #define BCM_6348_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 22)
--- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_UDC_H_
-+#define BCM63XX_DEV_USB_UDC_H_
-+
-+int bcm63xx_udc_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_UDC_H_ */
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -47,6 +47,7 @@ struct board_info {
- 	unsigned int	has_dsp:1;
- 	unsigned int	has_uart0:1;
- 	unsigned int	has_uart1:1;
-+	unsigned int	has_udc0:1;
- 
- 	/* ethernet config */
- 	struct bcm63xx_enet_platform_data enet0;
--- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- 		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
-		   dev-usb-ohci.o dev-usb-ehci.o
-+		   dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
- obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
- 
- obj-y		+= boards/
--- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
- };
- 
- /*
-+ * USB slave clock
-+ */
-+static void usbs_set(struct clk *clk, int enable)
-+{
-+	u32 mask;
-+
-+	switch(bcm63xx_get_cpu_id()) {
-+	case BCM6338_CPU_ID:
-+		mask = CKCTL_6338_USBS_EN;
-+		break;
-+	case BCM6348_CPU_ID:
-+		mask = CKCTL_6348_USBS_EN;
-+		break;
-+	default:
-+		return;
-+	}
-+	bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_usbs = {
-+	.set    = usbs_set,
-+};
-+
-+/*
-  * SPI clock
-  */
- static void spi_set(struct clk *clk, int enable)
-@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
- 		return &clk_ephy;
- 	if (!strcmp(id, "usbh"))
- 		return &clk_usbh;
-+	if (!strcmp(id, "usbs"))
-+		return &clk_usbs;
- 	if (!strcmp(id, "spi"))
- 		return &clk_spi;
- 	if (!strcmp(id, "periph"))
--- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_UDC
- 
- config BCM63XX_CPU_6345
- 	bool "support 6345 CPU"
-@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
- 	select USB_ARCH_HAS_OHCI
- 	select USB_OHCI_BIG_ENDIAN_DESC
- 	select USB_OHCI_BIG_ENDIAN_MMIO
-+	select USB_ARCH_HAS_UDC
- 
- config BCM63XX_CPU_6358
- 	bool "support 6358 CPU"
--- a/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/200-extended-platform-devices.patch
@ -1,25 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1008,6 +1008,9 @@ int __init board_register_devices(void)
- 	if (board.has_udc0)
- 		bcm63xx_udc_register();
- 
-+	if (board.num_devs)
-+		platform_add_devices(board.devs, board.num_devs);
-+
- 	/* read base address of boot chip select (0) */
- 	if (BCMCPU_IS_6345())
- 		val = 0x1fc00000;
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
- 
- 	/* Buttons */
- 	struct gpio_button buttons[2];
-+
-+	/* Additional platform devices */
-+	struct platform_device **devs;
-+	unsigned int	num_devs;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
--- a/target/linux/brcm63xx/patches-2.6.35/200-spi-board-info.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/200-spi-board-info.patch
@ -1,25 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1011,6 +1011,9 @@ int __init board_register_devices(void)
- 	if (board.num_devs)
- 		platform_add_devices(board.devs, board.num_devs);
- 
-+	if (board.num_spis)
-+		spi_register_board_info(board.spis, board.num_spis);
-+
- 	/* read base address of boot chip select (0) */
- 	if (BCMCPU_IS_6345())
- 		val = 0x1fc00000;
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -65,6 +65,10 @@ struct board_info {
- 	/* Additional platform devices */
- 	struct platform_device **devs;
- 	unsigned int	num_devs;
-+
-+	/* Additional platform devices */
-+	struct spi_board_info *spis;
-+	unsigned int	num_spis;
- };
- 
- #endif /* ! BOARD_BCM963XX_H_ */
--- a/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch
@ -1,458 +0,0 @@
--- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -321,6 +321,14 @@ config GPIO_MC33880
- 	  SPI driver for Freescale MC33880 high-side/low-side switch.
- 	  This provides GPIO interface supporting inputs and outputs.
- 
-+config GPIO_74X164
-+	tristate "74x164 serial-in/parallel-out 8-bits shift register"
-+	depends on SPI_MASTER
-+	help
-+	  Platform driver for 74x164 compatible serial-in/parallel-out
-+	  8-outputs shift registers. This driver can be used to provide access
-+	  to more gpio outputs.
-+
- comment "AC97 GPIO expanders:"
- 
- config GPIO_UCB1400
--- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
- obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
- obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
- obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
-+obj-$(CONFIG_GPIO_74X164)	+= 74x164.o
- obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
- obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
- obj-$(CONFIG_GPIO_PL061)	+= pl061.o
--- /dev/null
-+++ b/drivers/gpio/nxp_74hc164.c
-@@ -0,0 +1,227 @@
-+/*
-+ *  NXP 74HC164 - output expander  GPIO driver
-+ *
-+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ *
-+ *  Copy from nxp_74hc153.c code
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/gpio.h>
-+#include <linux/bitops.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/nxp_74hc164.h>
-+
-+#define NXP_74HC164_NUM_GPIOS	8
-+
-+struct nxp_74hc164_chip {
-+	struct device		*parent;
-+	struct gpio_chip	gpio_chip;
-+	struct mutex		lock;
-+	long			mask;
-+};
-+
-+static void nxp_74hc164_set_value(struct gpio_chip *, unsigned, int);
-+
-+static struct nxp_74hc164_chip *gpio_to_nxp(struct gpio_chip *gc)
-+{
-+	return container_of(gc, struct nxp_74hc164_chip, gpio_chip);
-+}
-+
-+static int nxp_74hc164_direction_input(struct gpio_chip *gc, unsigned offset)
-+{
-+	WARN_ON(1);
-+	return -EINVAL;
-+}
-+
-+static int nxp_74hc164_direction_output(struct gpio_chip *gc,
-+					unsigned offset, int val)
-+{
-+	nxp_74hc164_set_value(gc, offset, val);
-+	return 0;
-+}
-+
-+static int nxp_74hc164_get_value(struct gpio_chip *gc, unsigned offset)
-+{
-+	struct nxp_74hc164_chip *nxp = gpio_to_nxp(gc);
-+	int ret;
-+
-+	mutex_lock(&nxp->lock);
-+	ret = test_bit(offset, &nxp->mask);
-+	mutex_unlock(&nxp->lock);
-+
-+	return ret;
-+}
-+
-+static void nxp_74hc164_set_value(struct gpio_chip *gc,
-+				  unsigned offset, int val)
-+{
-+	struct nxp_74hc164_chip *nxp;
-+	struct nxp_74hc164_platform_data *pdata;
-+	long mask;
-+	int refresh;
-+	int i;
-+
-+	nxp = gpio_to_nxp(gc);
-+	pdata = nxp->parent->platform_data;
-+
-+	mutex_lock(&nxp->lock);
-+	if (val)
-+		refresh = (test_and_set_bit(offset, &nxp->mask) != val);
-+	else
-+		refresh = (test_and_clear_bit(offset, &nxp->mask) != val);
-+
-+	if (refresh) {
-+		mask = nxp->mask;
-+		for (i = 8; i > 0; --i, mask <<= 1) {
-+			gpio_set_value(pdata->gpio_pin_data, mask & 0x80);
-+			gpio_set_value(pdata->gpio_pin_clk, 1);
-+			gpio_set_value(pdata->gpio_pin_clk, 0);
-+		}
-+	}
-+	mutex_unlock(&nxp->lock);
-+}
-+
-+static int __devinit nxp_74hc164_probe(struct platform_device *pdev)
-+{
-+	struct nxp_74hc164_platform_data *pdata;
-+	struct nxp_74hc164_chip *nxp;
-+	struct gpio_chip *gc;
-+	int err;
-+
-+	pdata = pdev->dev.platform_data;
-+	if (pdata == NULL) {
-+		dev_dbg(&pdev->dev, "no platform data specified\n");
-+		return -EINVAL;
-+	}
-+
-+	nxp = kzalloc(sizeof(struct nxp_74hc164_chip), GFP_KERNEL);
-+	if (nxp == NULL) {
-+		dev_err(&pdev->dev, "no memory for private data\n");
-+		return -ENOMEM;
-+	}
-+
-+	err = gpio_request(pdata->gpio_pin_clk, dev_name(&pdev->dev));
-+	if (err) {
-+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
-+			pdata->gpio_pin_clk, err);
-+		goto err_free_nxp;
-+	}
-+
-+	err = gpio_request(pdata->gpio_pin_data, dev_name(&pdev->dev));
-+	if (err) {
-+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
-+			pdata->gpio_pin_data, err);
-+		goto err_free_clk;
-+	}
-+
-+	err = gpio_direction_output(pdata->gpio_pin_clk, 0);
-+	if (err) {
-+		dev_err(&pdev->dev,
-+			"unable to set direction of gpio %u, err=%d\n",
-+			pdata->gpio_pin_clk, err);
-+		goto err_free_data;
-+	}
-+
-+	err = gpio_direction_output(pdata->gpio_pin_data, 0);
-+	if (err) {
-+		dev_err(&pdev->dev,
-+			"unable to set direction of gpio %u, err=%d\n",
-+			pdata->gpio_pin_data, err);
-+		goto err_free_data;
-+	}
-+
-+	nxp->parent = &pdev->dev;
-+	mutex_init(&nxp->lock);
-+
-+	gc = &nxp->gpio_chip;
-+
-+	gc->direction_input  = nxp_74hc164_direction_input;
-+	gc->direction_output = nxp_74hc164_direction_output;
-+	gc->get = nxp_74hc164_get_value;
-+	gc->set = nxp_74hc164_set_value;
-+	gc->can_sleep = 1;
-+
-+	gc->base = pdata->gpio_base;
-+	gc->ngpio = NXP_74HC164_NUM_GPIOS;
-+	gc->label = dev_name(nxp->parent);
-+	gc->dev = nxp->parent;
-+	gc->owner = THIS_MODULE;
-+
-+	err = gpiochip_add(&nxp->gpio_chip);
-+	if (err) {
-+		dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
-+		goto err_free_data;
-+	}
-+
-+	platform_set_drvdata(pdev, nxp);
-+	return 0;
-+
-+ err_free_data:
-+	gpio_free(pdata->gpio_pin_data);
-+ err_free_clk:
-+	gpio_free(pdata->gpio_pin_clk);
-+ err_free_nxp:
-+	kfree(nxp);
-+	return err;
-+}
-+
-+static int nxp_74hc164_remove(struct platform_device *pdev)
-+{
-+	struct nxp_74hc164_chip *nxp = platform_get_drvdata(pdev);
-+	struct nxp_74hc164_platform_data *pdata = pdev->dev.platform_data;
-+
-+	if (nxp) {
-+		int err;
-+
-+		err = gpiochip_remove(&nxp->gpio_chip);
-+		if (err) {
-+			dev_err(&pdev->dev,
-+				"unable to remove gpio chip, err=%d\n",
-+				err);
-+			return err;
-+		}
-+
-+		gpio_free(pdata->gpio_pin_clk);
-+		gpio_free(pdata->gpio_pin_data);
-+
-+		kfree(nxp);
-+		platform_set_drvdata(pdev, NULL);
-+	}
-+
-+	return 0;
-+}
-+
-+static struct platform_driver nxp_74hc164_driver = {
-+	.probe		= nxp_74hc164_probe,
-+	.remove		= __devexit_p(nxp_74hc164_remove),
-+	.driver = {
-+		.name	= NXP_74HC164_DRIVER_NAME,
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init nxp_74hc164_init(void)
-+{
-+	return platform_driver_register(&nxp_74hc164_driver);
-+}
-+subsys_initcall(nxp_74hc164_init);
-+
-+static void __exit nxp_74hc164_exit(void)
-+{
-+	platform_driver_unregister(&nxp_74hc164_driver);
-+}
-+module_exit(nxp_74hc164_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC164");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME);
--- /dev/null
-+++ b/drivers/gpio/74x164.c
-@@ -0,0 +1,184 @@
-+/*
-+ *  74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver
-+ *
-+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License version 2 as
-+ *  published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/mutex.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/74x164.h>
-+#include <linux/gpio.h>
-+#include <linux/slab.h>
-+
-+#define GEN_74X164_GPIO_COUNT	8
-+
-+
-+struct gen_74x164_chip {
-+	struct spi_device	*spi;
-+	struct gpio_chip	gpio_chip;
-+	struct mutex		lock;
-+	u8			port_config;
-+};
-+
-+static void gen_74x164_set_value(struct gpio_chip *, unsigned, int);
-+
-+static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc)
-+{
-+	return container_of(gc, struct gen_74x164_chip, gpio_chip);
-+}
-+
-+static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
-+{
-+	return spi_write(chip->spi,
-+			 &chip->port_config, sizeof(chip->port_config));
-+}
-+
-+static int gen_74x164_direction_output(struct gpio_chip *gc,
-+		unsigned offset, int val)
-+{
-+	gen_74x164_set_value(gc, offset, val);
-+	return 0;
-+}
-+
-+static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
-+{
-+	struct gen_74x164_chip *chip = gpio_to_chip(gc);
-+	int ret;
-+
-+	mutex_lock(&chip->lock);
-+	ret = (chip->port_config >> offset) & 0x1;
-+	mutex_unlock(&chip->lock);
-+
-+	return ret;
-+}
-+
-+static void gen_74x164_set_value(struct gpio_chip *gc,
-+		unsigned offset, int val)
-+{
-+	struct gen_74x164_chip *chip = gpio_to_chip(gc);
-+	bool refresh;
-+
-+	mutex_lock(&chip->lock);
-+	if (val)
-+		chip->port_config |= (1 << offset);
-+	else
-+		chip->port_config &= ~(1 << offset);
-+
-+	__gen_74x164_write_config(chip);
-+	mutex_unlock(&chip->lock);
-+}
-+
-+static int __devinit gen_74x164_probe(struct spi_device *spi)
-+{
-+	struct gen_74x164_chip *chip;
-+	struct gen_74x164_chip_platform_data *pdata;
-+	int ret;
-+
-+	pdata = spi->dev.platform_data;
-+	if (!pdata || !pdata->base) {
-+		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
-+		return -EINVAL;
-+	}
-+
-+	/*
-+	 * bits_per_word cannot be configured in platform data
-+	 */
-+	spi->bits_per_word = 8;
-+
-+	ret = spi_setup(spi);
-+	if (ret < 0)
-+		return ret;
-+
-+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-+	if (!chip)
-+		return -ENOMEM;
-+
-+	mutex_init(&chip->lock);
-+
-+	dev_set_drvdata(&spi->dev, chip);
-+
-+	chip->spi = spi;
-+
-+	chip->gpio_chip.label = GEN_74X164_DRIVER_NAME,
-+		chip->gpio_chip.direction_output = gen_74x164_direction_output;
-+	chip->gpio_chip.get = gen_74x164_get_value;
-+	chip->gpio_chip.set = gen_74x164_set_value;
-+	chip->gpio_chip.base = pdata->base;
-+	chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT;
-+	chip->gpio_chip.can_sleep = 1;
-+	chip->gpio_chip.dev = &spi->dev;
-+	chip->gpio_chip.owner = THIS_MODULE;
-+
-+	ret = __gen_74x164_write_config(chip);
-+	if (ret) {
-+		dev_err(&spi->dev, "Failed writing: %d\n", ret);
-+		goto exit_destroy;
-+	}
-+
-+	ret = gpiochip_add(&chip->gpio_chip);
-+	if (ret)
-+		goto exit_destroy;
-+
-+	return ret;
-+
-+exit_destroy:
-+	dev_set_drvdata(&spi->dev, NULL);
-+	mutex_destroy(&chip->lock);
-+	kfree(chip);
-+	return ret;
-+}
-+
-+static int gen_74x164_remove(struct spi_device *spi)
-+{
-+	struct gen_74x164_chip *chip;
-+	int ret;
-+
-+	chip = dev_get_drvdata(&spi->dev);
-+	if (chip == NULL)
-+		return -ENODEV;
-+
-+	dev_set_drvdata(&spi->dev, NULL);
-+
-+	ret = gpiochip_remove(&chip->gpio_chip);
-+	if (!ret) {
-+		mutex_destroy(&chip->lock);
-+		kfree(chip);
-+	} else
-+		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
-+				ret);
-+
-+	return ret;
-+}
-+
-+static struct spi_driver gen_74x164_driver = {
-+	.driver = {
-+		.name		= GEN_74X164_DRIVER_NAME,
-+		.owner		= THIS_MODULE,
-+	},
-+	.probe		= gen_74x164_probe,
-+	.remove		= __devexit_p(gen_74x164_remove),
-+};
-+
-+static int __init gen_74x164_init(void)
-+{
-+	return spi_register_driver(&gen_74x164_driver);
-+}
-+subsys_initcall(gen_74x164_init);
-+
-+static void __exit gen_74x164_exit(void)
-+{
-+	spi_unregister_driver(&gen_74x164_driver);
-+}
-+module_exit(gen_74x164_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-+MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register");
-+MODULE_LICENSE("GPL v2");
-+
--- /dev/null
-+++ b/include/linux/spi/74x164.h
-@@ -0,0 +1,11 @@
-+#ifndef LINUX_SPI_74X164_H
-+#define LINUX_SPI_74X164_H
-+
-+#define GEN_74X164_DRIVER_NAME "74x164"
-+
-+struct gen_74x164_chip_platform_data {
-+	/* number assigned to the first GPIO */
-+	unsigned	base;
-+};
-+
-+#endif
--- a/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/220-board-D4PW.patch
@ -1,60 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -464,6 +464,49 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+	.name				= "D-4P-W",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_ehci0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "ppp",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "ppp-fail",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+
-+		},
-+	},
-+
-+};
-+
- #endif
- 
- /*
-@@ -728,6 +771,7 @@ static const struct board_info __initdat
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
-+	&board_96348_D4PW,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
--- a/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/221-board-NB4.patch
@ -1,569 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,9 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_buttons.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -34,6 +37,12 @@
- 
- #define PFX	"board_bcm963xx: "
- 
-+#define NB4_PID_OFFSET		0xff80
-+#define NB4_74X164_GPIO_BASE	64
-+#define NB4_SPI_GPIO_MOSI	7
-+#define NB4_SPI_GPIO_CLK	6
-+#define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -749,6 +758,502 @@ static struct board_info __initdata boar
- 
- 	.has_ohci0			= 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+	.sck		= NB4_SPI_GPIO_CLK,
-+	.mosi		= NB4_SPI_GPIO_MOSI,
-+	.miso		= SPI_GPIO_NO_MISO,
-+	.num_chipselect	= 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+	.name = "spi_gpio",
-+	.id   = 1,
-+	.dev = {
-+		.platform_data = &nb4_spi_gpio_data,
-+	},
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+	&nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+	.base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+	{
-+		.modalias = "74x164",
-+		.max_speed_hz = 781000,
-+		.bus_num = 1,
-+		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+		.mode = SPI_MODE_0,
-+		.platform_data = &nb4_74x164_platform_data
-+	}
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+	.name				= "NB4-SER-r0",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+	.name				= "NB4-SER-r1",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+	.name				= "NB4-SER-r2",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+	.name				= "NB4-FXC-r1",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.has_udc0			= 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+	.name				= "NB4-FXC-r2",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= NB4_74HC64_GPIO(4),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "traffic",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= NB4_74HC64_GPIO(3),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tv",
-+			.gpio		= NB4_74HC64_GPIO(2),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 15,
-+		},
-+		{
-+			.name		= "alarm",
-+			.gpio		= NB4_74HC64_GPIO(0),
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "service:red",
-+			.gpio		= 29,
-+		},
-+		{
-+			.name		= "service:green",
-+			.gpio		= 30,
-+		},
-+		{
-+			.name		= "service:blue",
-+			.gpio		= 4,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+	.devs = nb4_devices,
-+	.num_devs = ARRAY_SIZE(nb4_devices),
-+	.spis = nb4_spi_devices,
-+	.num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
- 
- /*
-@@ -779,9 +1284,30 @@ static const struct board_info __initdat
- 	&board_96358vw2,
- 	&board_AGPFS0,
- 	&board_DWVS0,
-+	&board_nb4_ser_r0,
-+	&board_nb4_ser_r1,
-+	&board_nb4_ser_r2,
-+	&board_nb4_fxc_r1,
-+	&board_nb4_fxc_r2,
- #endif
- };
- 
-+static void __init nb4_nvram_fixup(void)
-+{
-+	u8 *boot_addr, *p;
-+	u32 val;
-+
-+	if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
-+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+		val &= MPI_CSBASE_BASE_MASK;
-+		boot_addr = (u8 *)KSEG1ADDR(val);
-+		/* Extract nb4 PID */
-+		p = boot_addr + NB4_PID_OFFSET;
-+		if (!memcmp(p, "NB4-", 4))
-+			memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
-+	}
-+}
-+
- /*
-  * Register a sane SPROMv2 to make the on-board
-  * bcm4318 WLAN work
-@@ -899,6 +1425,9 @@ void __init board_prom_init(void)
- 		return;
- 	}
- 
-+	/* Fixup broken nb4 board name */
-+	nb4_nvram_fixup();
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
--- a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch
--- a/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/250-6358-enet1-external-mii-clk.patch
@ -1,22 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1477,6 +1477,8 @@ void __init board_prom_init(void)
- 		if (BCMCPU_IS_6348())
- 			val |= GPIO_MODE_6348_G3_EXT_MII |
- 				GPIO_MODE_6348_G0_EXT_MII;
-+		else if (BCMCPU_IS_6358())
-+			val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- 	}
- 
- 	bcm_gpio_writel(val, GPIO_MODE_REG);
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -402,6 +402,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
- #define GPIO_MODE_6358_UTOPIA		(1 << 12)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 31)
- 
- 
- /*************************************************************************
--- a/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/260-no_ehci_over_current_check.patch
@ -1,16 +0,0 @@
--- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -837,11 +837,13 @@ static int ehci_hub_control (
- 			 * power switching; they're allowed to just limit the
- 			 * current.  khubd will turn the power back on.
- 			 */
-+#ifndef CONFIG_BCM63XX
- 			if (HCS_PPC (ehci->hcs_params)){
- 				ehci_writel(ehci,
- 					temp & ~(PORT_RWC_BITS | PORT_POWER),
- 					status_reg);
- 			}
-+#endif
- 		}
- 
- 		/* whoever resumes must GetPortStatus to complete it!! */
--- a/target/linux/brcm63xx/patches-2.6.35/270-board-96338W2_E7T.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/270-board-96338W2_E7T.patch
@ -1,49 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -135,6 +135,38 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+	.name				= "96338W2_E7T",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+		.leds = {
-+		{
-+			.name		= "ppp",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "ppp-fail",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -1264,6 +1296,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6338
- 	&board_96338gw,
- 	&board_96338w,
-+	&board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
--- a/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/300-wl_exports.patch
@ -1,34 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -49,6 +49,13 @@ static unsigned int mac_addr_used;
- static struct board_info board;
- 
- /*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
-+/*
-  * known 6338 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -1444,6 +1451,7 @@ void __init board_prom_init(void)
- 
- 	/* extract nvram data */
- 	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
-+	memcpy(&nvram_buf, boot_addr + BCM963XX_NVRAM_OFFSET, NVRAM_SPACE);
- 
- 	/* check checksum before using data */
- 	if (nvram.version <= 4)
--- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -52,6 +52,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
--- a/target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/310-CPVA642_board.patch
@ -1,109 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -662,6 +662,98 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_CPVA642 = {
-+	.name                           = "CPVA642",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+
-+	.enet1 = {
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+ 	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+	    /* bi-color */
-+		{
-+			.name		= "power:red",
-+			.gpio		= 14,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 11,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:green",
-+			.gpio		= 28,
-+			.active_low	= 0,
-+		},
-+		{
-+			.name		= "link:red",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "link:green",
-+			.gpio		= 10,
-+			.active_low	= 1,
-+		},
-+		/* green only */
-+		{
-+			.name		= "ether",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "phone1",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "phone2",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "usb",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+    },
-+
-+	.buttons = {
-+		{
-+			.desc           = "reset",
-+			.gpio           = 36,
-+			.active_low     = 1,
-+			.type           = EV_KEY,
-+			.code           = KEY_RESTART,
-+			.threshold      = 3,
-+		},
-+		{
-+			.desc		= "wps",
-+			.gpio		= 37,
-+			.type		= EV_KEY,
-+			.code		= KEY_WPS_BUTTON,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
- 	.name                           = "AGPF-S0",
- 	.expected_cpu_id                = 0x6358,
-@@ -1324,6 +1416,7 @@ static const struct board_info __initdat
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
-+	&board_CPVA642,
- 	&board_DWVS0,
- 	&board_nb4_ser_r0,
- 	&board_nb4_ser_r1,
--- a/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/400-board_96358gw.patch
@ -1,70 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -562,6 +562,59 @@ static struct board_info __initdata boar
-  * known 6358 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6358
-+
-+static struct board_info __initdata board_96358gw = {
-+	.name				= "96358GW",
-+	.expected_cpu_id		= 0x6358,
-+
-+	.has_uart0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "power:green",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "power:red",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl",
-+			.gpio		= 9,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internet:green",
-+			.gpio		= 2,
-+		},
-+		{
-+			.name		= "internet:red",
-+			.gpio		= 10,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 34,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_96358vw = {
- 	.name				= "96358VW",
- 	.expected_cpu_id		= 0x6358,
-@@ -1413,6 +1466,7 @@ static const struct board_info __initdat
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
-+	&board_96358gw,
- 	&board_96358vw,
- 	&board_96358vw2,
- 	&board_AGPFS0,
--- a/target/linux/brcm63xx/patches-2.6.35/410-boardid_fixup.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/410-boardid_fixup.patch
@ -1,62 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -35,6 +35,7 @@
- #include <bcm63xx_dev_usb_udc.h>
- #include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-+#include <bcm_tag.h>
- 
- #define PFX	"board_bcm963xx: "
- 
-@@ -44,6 +45,9 @@
- #define NB4_SPI_GPIO_CLK	6
- #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
- 
-+#define CFE_OFFSET_64K		0x10000
-+#define CFE_OFFSET_128K		0x20000
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -1566,6 +1570,29 @@ static int board_get_mac_address(u8 *mac
- 	return 0;
- }
- 
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+
-+	/* check if bcm_tag is at 64k offset */
-+	if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+		/* else try 128k */
-+		tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+		if (strncmp(nvram.name, tag->boardid, BOARDID_LEN) != 0) {
-+			/* No tag found */
-+			printk(KERN_DEBUG "No bcm_tag found!\n");
-+			return;
-+		}
-+	}
-+	/* check if we should override the boardid */
-+	if (tag->information1[0] != '+')
-+		return;
-+
-+	strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
-+
-+	printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
-+}
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -1617,6 +1644,11 @@ void __init board_prom_init(void)
- 	/* Fixup broken nb4 board name */
- 	nb4_nvram_fixup();
- 
-+	if (strcmp(cfe_version, "unknown") != 0) {
-+		/* cfe present */
-+		boardid_fixup(boot_addr);
-+	}
-+
- 	/* find board by name */
- 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- 		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
--- a/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/420-board_spw500v.patch
@ -1,78 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -560,6 +560,67 @@ static struct board_info __initdata boar
- 
- };
- 
-+static struct board_info __initdata board_spw500v = {
-+	.name				= "SPW500V",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "power:red",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:green",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "ppp",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{	.name		= "pstn",
-+			.gpio		= 28,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "voip",
-+			.gpio		= 32,
-+			.active_low	= 1,
-+		},
-+	},
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -1467,6 +1528,7 @@ static const struct board_info __initdat
- 	&board_96348gw_a,
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
-+	&board_spw500v,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
--- a/target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch
@ -1,129 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -432,6 +432,117 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_gw6200 = {
-+	.name				= "GW6200",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+		.dsp = {
-+        .gpio_rst		= 8, /* FIXME: What is real GPIO here? */
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "line1",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line2",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "line3",
-+			.gpio		= 6,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "tel",
-+			.gpio		= 7,
-+			.active_low	= 1,
-+		},
-+		{
-+		    .name		= "ethernet",
-+		    .gpio		= 35,
-+		    .active_low	= 1,
-+		}, 
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+	.name				= "GW6000",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 6,
-+		.gpio_int		= 34,
-+		.ext_irq		= 2,
-+		.cs			= 2,
-+	},
-+
-+	/* GW6000 has no GPIO-controlled leds */
-+
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 36,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- 	.name				= "F@ST2404",
- 	.expected_cpu_id		= 0x6348,
-@@ -1521,6 +1632,8 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
- 	&board_96348gw,
-+	&board_gw6000,
-+	&board_gw6200,
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,
--- a/target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/440-new_96348gw-11_leds.patch
@ -1,60 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -364,6 +364,49 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_ct536_ct5621 = {
-+	.name				= "CT536_CT5621",
-+	.expected_cpu_id		= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 0,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet1 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_pccard = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		{
-+			.name		= "adsl-fail",
-+			.gpio		= 2,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc		= "reset",
-+			.gpio		= 33,
-+			.active_low	= 1,
-+			.type		= EV_KEY,
-+			.code		= KEY_RESTART,
-+			.threshold	= 3,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_96348gw = {
- 	.name				= "96348GW",
- 	.expected_cpu_id		= 0x6348,
-@@ -1642,6 +1685,7 @@ static const struct board_info __initdat
- 	&board_rta1025w_16,
- 	&board_96348_D4PW,
- 	&board_spw500v,
-+	&board_ct536_ct5621,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
--- a/target/linux/brcm63xx/patches-2.6.35/450-board-MAGIC.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/450-board-MAGIC.patch
@ -1,89 +0,0 @@
-Index: linux-2.6.35.9/arch/mips/bcm63xx/boards/board_bcm963xx.c
-===================================================================
--- linux-2.6.35.9.orig/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ linux-2.6.35.9/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -775,6 +775,76 @@ static struct board_info __initdata boar
- 	},
- };
- 
-+static struct board_info __initdata board_96348sv = {
-+	.name				= "MAGIC",
-+	.expected_cpu_id	= 0x6348,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+	.has_enet1			= 1,
-+	.has_pci			= 1,
-+
-+	.enet0 = {
-+		.has_phy			= 1,
-+		.use_internal_phy	= 1,
-+	},
-+	.enet1 = {
-+		/* is has BP_ENET_EXTERNAL_PHY */
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+	.has_ohci0			= 1,
-+	.has_pccard			= 1,
-+	.has_ehci0			= 1,
-+
-+	.has_dsp			= 1,
-+	.dsp = {
-+		.gpio_rst		= 25,
-+		.gpio_int		= 34,
-+		.cs				= 2,
-+		.ext_irq		= 2,
-+	},
-+
-+	.leds = {
-+		{
-+			.name		= "voip",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi",
-+			.gpio		= 28,
-+		},
-+		{
-+			.name		= "usb",
-+			.gpio		= 35,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "hpna",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "stop",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+	},
-+};
-+
- #endif
- 
- /*
-@@ -1686,6 +1756,7 @@ static const struct board_info __initdat
- 	&board_96348_D4PW,
- 	&board_spw500v,
- 	&board_ct536_ct5621,
-+	&board_96348sv,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6358
--- a/target/linux/brcm63xx/patches-2.6.35/451-board_hw553.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/451-board_hw553.patch
@ -1,90 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1730,6 +1730,79 @@ static struct board_info __initdata boar
- };
- #endif
- 
-+static struct board_info __initdata board_HW553 = {
-+	.name                           = "HW553",
-+	.expected_cpu_id                = 0x6358,
-+
-+	.has_enet0                      = 1,
-+	.has_enet1                      = 1,
-+	.has_pci                        = 1,
-+
-+	.enet0 = {
-+		.has_phy                = 1,
-+		.use_internal_phy       = 1,
-+	},
-+
-+	.enet1 = {
-+		.force_speed_100        = 1,
-+		.force_duplex_full      = 1,
-+	},
-+
-+	.has_ohci0 = 1,
-+	.has_ehci0 = 1,
-+
-+	.leds = {
-+		/*Each led on HW553 is bi-color (except wifi) */		
-+		{
-+			.name		= "lan:red",
-+			.gpio		= 34,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "lan:blue",
-+			.gpio		= 35,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:red",
-+			.gpio		= 22,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "adsl:blue",
-+			.gpio		= 23,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power:red",
-+			.gpio		= 5,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+
-+		{
-+			.name		= "power:blue",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "wifi:red",
-+			.gpio		= 25,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internetkey:red",
-+			.gpio		= 12,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "internetkey:blue",
-+			.gpio		= 13,
-+			.active_low	= 1,
-+		},
-+	},
-+};
-+
- /*
-  * all boards
-  */
-@@ -1771,6 +1844,7 @@ static const struct board_info __initdat
- 	&board_nb4_ser_r2,
- 	&board_nb4_fxc_r1,
- 	&board_nb4_fxc_r2,
-+	&board_HW553,
- #endif
- };
- 
--- a/target/linux/brcm63xx/patches-2.6.35/452-board_rta1320_16m.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/452-board_rta1320_16m.patch
@ -1,54 +0,0 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -178,6 +178,43 @@ static struct board_info __initdata boar
- 		},
- 	},
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+	.name				= "RTA1320_16M",
-+	.expected_cpu_id		= 0x6338,
-+
-+	.has_uart0			= 1,
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+
-+		.leds = {
-+		{
-+			.name		= "adsl",
-+			.gpio		= 3,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "ppp",
-+			.gpio		= 4,
-+			.active_low	= 1,
-+		},
-+		{
-+			.name		= "power",
-+			.gpio		= 0,
-+			.active_low	= 1,
-+			.default_trigger = "default-on",
-+		},
-+		{
-+			.name		= "stop",
-+			.gpio		= 1,
-+			.active_low	= 1,
-+		},
-+	},
-+};
- #endif
- 
- /*
-@@ -1811,6 +1848,7 @@ static const struct board_info __initdat
- 	&board_96338gw,
- 	&board_96338w,
- 	&board_96338w2_e7t,
-+	&board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
--- a/target/linux/brcm63xx/patches-2.6.35/977-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-2.6.35/977-ssb_export_fallback_sprom.patch
@ -1,20 +0,0 @@
--- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -176,6 +176,7 @@ const struct ssb_sprom *ssb_get_fallback
- {
- 	return fallback_sprom;
- }
-+EXPORT_SYMBOL(ssb_get_fallback_sprom);
- 
- /* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
- bool ssb_is_sprom_available(struct ssb_bus *bus)
--- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -405,6 +405,7 @@ extern bool ssb_is_sprom_available(struc
- /* Set a fallback SPROM.
-  * See kdoc at the function definition for complete documentation. */
- extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
-+extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
- 
- /* Suspend a SSB bus.
-  * Call this from the parent bus suspend routine. */