KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
18996 commits 1 branch 0 tags 154 MiB
Commit graph

7404 commits

Author SHA1 Message Date
Imre Kaloz
0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again 
SVN-Revision: 27592
 2011-07-11 20:35:16 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Imre Kaloz
8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches 
SVN-Revision: 27558
 2011-07-08 09:41:07 +00:00
Imre Kaloz
b3b0f0e49a add mpcore_wdt fixes 
SVN-Revision: 27557
 2011-07-08 09:33:13 +00:00
John Crispin
7f548d379f fix generation of falcon images for profiles 
SVN-Revision: 27550
 2011-07-07 20:20:51 +00:00
John Crispin
d7732885ed adds 2 ASC related patches to lantiq 
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
 2011-07-07 20:20:46 +00:00
John Crispin
b75a8fb532 fix up falcon kernel config 
SVN-Revision: 27542
 2011-07-07 18:20:56 +00:00
John Crispin
036df9f088 fix i2c-falcon kmod package selection 
SVN-Revision: 27541
 2011-07-07 18:20:51 +00:00
John Crispin
a463daa818 replace all references to xway with danube 
SVN-Revision: 27538
 2011-07-07 18:20:37 +00:00
John Crispin
dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube 
SVN-Revision: 27537
 2011-07-07 18:20:31 +00:00
John Crispin
3c1079a7a7 add ar9 specific profile 
SVN-Revision: 27536
 2011-07-07 18:20:27 +00:00
John Crispin
09d547eae4 rename xway profile to danube and remove ar9 specifics 
SVN-Revision: 27535
 2011-07-07 18:20:21 +00:00
John Crispin
f177052c9d remove ar9 board from xway profiles 
SVN-Revision: 27534
 2011-07-07 18:20:16 +00:00
John Crispin
dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches 
SVN-Revision: 27532
 2011-07-07 18:20:07 +00:00
Imre Kaloz
79fa6c693a refresh patches 
SVN-Revision: 27528
 2011-07-07 17:18:50 +00:00
Imre Kaloz
b8227050fb refresh patches 
SVN-Revision: 27527
 2011-07-07 17:18:06 +00:00
Imre Kaloz
92981b6bb3 enable smp support 
SVN-Revision: 27526
 2011-07-07 17:17:44 +00:00
Imre Kaloz
94055a90a7 make smp code more similar to upstream 
SVN-Revision: 27525
 2011-07-07 17:17:06 +00:00
Imre Kaloz
42df203852 3.0 is at rc6 now 
SVN-Revision: 27524
 2011-07-07 13:30:41 +00:00
Gabor Juhos
5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash 
SVN-Revision: 27523
 2011-07-07 13:01:50 +00:00
Gabor Juhos
cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
SVN-Revision: 27522
 2011-07-07 13:01:48 +00:00
Imre Kaloz
b15f8f765a add support for and switch to XZ compressed kernels on ARM 
SVN-Revision: 27518
 2011-07-07 10:26:16 +00:00
Imre Kaloz
d148dcce05 select the right cpu 
SVN-Revision: 27517
 2011-07-07 10:24:37 +00:00
Florian Fainelli
a3e343b722 fix building of perf for arm on uclibc 
SVN-Revision: 27514
 2011-07-07 09:43:00 +00:00
Florian Fainelli
a4d69536ea enable support for perf events 
SVN-Revision: 27512
 2011-07-07 09:42:53 +00:00
Florian Fainelli
0cb42cf9a4 enable perf counter support 
SVN-Revision: 27511
 2011-07-07 09:42:50 +00:00
Daniel Dickinson
0d8b0e937d base-files: diag.sh: added failsafe led definition 
SVN-Revision: 27502
 2011-07-07 03:09:20 +00:00
John Crispin
a674aabe54 get ready for 3.0 
SVN-Revision: 27496
 2011-07-06 17:27:17 +00:00
Gabor Juhos
abb1ca01a7 ramips: fix buffalo image generation 
SVN-Revision: 27495
 2011-07-06 16:46:33 +00:00
Imre Kaloz
a832965eff add 3.0 support 
SVN-Revision: 27493
 2011-07-06 13:03:38 +00:00
Imre Kaloz
a00596924b refresh patches 
SVN-Revision: 27492
 2011-07-06 12:57:51 +00:00
Imre Kaloz
90bd74dd8b fixup mtd refresh and co. 
SVN-Revision: 27491
 2011-07-06 12:55:21 +00:00
Imre Kaloz
f24764a372 fix myloader patch, thanks KanjiMonster 
SVN-Revision: 27490
 2011-07-06 12:48:17 +00:00
John Crispin
d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot 
SVN-Revision: 27489
 2011-07-06 10:36:56 +00:00
Imre Kaloz
c93b5653bc we have an up-to-date mach-type file now 
SVN-Revision: 27486
 2011-07-06 10:12:50 +00:00
Imre Kaloz
05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff 
SVN-Revision: 27485
 2011-07-06 10:09:15 +00:00
Florian Fainelli
00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Florian Fainelli
965567a320 refresh 2.6.39 geode patches 
SVN-Revision: 27483
 2011-07-06 10:00:05 +00:00
Gabor Juhos
1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

SVN-Revision: 27478
 2011-07-06 08:05:00 +00:00
Gabor Juhos
d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
SVN-Revision: 27477
 2011-07-06 08:04:55 +00:00
Gabor Juhos
2cc346b8e0 ramips: create tftp image for the WHR-G300N board 
SVN-Revision: 27476
 2011-07-06 08:04:54 +00:00
Gabor Juhos
0dc18d8586 ramips: create factory image for the WHR-G300N board 
SVN-Revision: 27474
 2011-07-06 08:04:52 +00:00
Daniel Dickinson
1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson
9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Imre Kaloz
612a1fcbc4 add some symbols 
SVN-Revision: 27464
 2011-07-05 21:19:57 +00:00
Florian Fainelli
d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423) 
SVN-Revision: 27457
 2011-07-05 12:40:50 +00:00
Imre Kaloz
c52560302d add missing symbols 
SVN-Revision: 27454
 2011-07-05 11:55:31 +00:00
Florian Fainelli
7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Gabor Juhos
89f6b29feb ar71xx: fix building of squashfs images 
SVN-Revision: 27446
 2011-07-04 12:10:03 +00:00
John Crispin
29653782a9 set DEFAULT_SUBTARGET for lantiq/ 
SVN-Revision: 27445
 2011-07-04 11:21:47 +00:00
John Crispin
04fefa4a28 fix broken falcon patches from last night 
SVN-Revision: 27441
 2011-07-04 07:50:34 +00:00
Gabor Juhos
e9c8218375 ramips: create factory image for DIR-300-B1 
SVN-Revision: 27439
 2011-07-04 06:48:45 +00:00
Felix Fietkau
7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
John Crispin
cd8166f3fd AT91: flexibity: add system uci file 
SVN-Revision: 27413
 2011-07-03 18:55:57 +00:00
John Crispin
349e97f879 AT91: Add flexibity board support 
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
 2011-07-03 18:51:59 +00:00
John Crispin
2975f0aaf1 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
 2011-07-03 17:39:24 +00:00
John Crispin
0a8430bfab use netif_receive_skb on lantiq 
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
 2011-07-03 17:39:05 +00:00
John Crispin
058eca0b3b automatic subtarget enumaration 
SVN-Revision: 27407
 2011-07-03 17:38:23 +00:00
John Crispin
43771202d3 update lantiq/falcon patches 
SVN-Revision: 27406
 2011-07-03 17:38:11 +00:00
John Crispin
d43cbe24a5 fix description for lantiq target 
SVN-Revision: 27405
 2011-07-03 17:37:57 +00:00
Gabor Juhos
6e7b802297 ramips: merge 2.6.39 patches 
SVN-Revision: 27399
 2011-07-03 15:02:10 +00:00
Gabor Juhos
646f64d389 ramips: remove 2.6.37 stuff 
SVN-Revision: 27398
 2011-07-03 15:02:09 +00:00
Gabor Juhos
2fc6be00f4 ramips: switch to 2.6.39.2 
SVN-Revision: 27397
 2011-07-03 15:02:07 +00:00
Gabor Juhos
0fde070cf9 ramips: add 2.6.39 support 
Based on the patches from #9625

SVN-Revision: 27396
 2011-07-03 15:02:06 +00:00
Gabor Juhos
c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver 
SVN-Revision: 27393
 2011-07-03 15:02:01 +00:00
Gabor Juhos
3334d0604e ramips: specify eeprom file name on RT305X 
SVN-Revision: 27392
 2011-07-03 15:02:00 +00:00
Gabor Juhos
f53cc4c439 ramips: specify eeprom file name on RT288X 
SVN-Revision: 27391
 2011-07-03 15:01:59 +00:00
Gabor Juhos
129217e127 generic: add rt2x00_platform.h 
SVN-Revision: 27390
 2011-07-03 15:01:57 +00:00
Gabor Juhos
521e495f4b ramips: add all supported boards to lib/ramips.sh 
SVN-Revision: 27389
 2011-07-03 15:01:56 +00:00
Gabor Juhos
6f54df889a ramips: check the size of the uImage in image generation 
SVN-Revision: 27388
 2011-07-03 15:01:55 +00:00
Gabor Juhos
575a5286c8 ramips: use lowercase partiion names on the WCR150GN board 
SVN-Revision: 27387
 2011-07-03 15:01:53 +00:00
Gabor Juhos
31facf0b75 ramips: use different partition names in the DIR-300-B1 image 
SVN-Revision: 27386
 2011-07-03 15:01:52 +00:00
Gabor Juhos
dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252) 
SVN-Revision: 27385
 2011-07-03 15:01:51 +00:00
Gabor Juhos
f1cf43d468 ramips: update partition map for DIR-300-B1 
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
 2011-07-03 15:01:49 +00:00
Gabor Juhos
641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions 
SVN-Revision: 27383
 2011-07-03 15:01:48 +00:00
Gabor Juhos
381d7f05af ramips: fix a section mismatch warning 
SVN-Revision: 27382
 2011-07-03 15:01:46 +00:00
Gabor Juhos
16ad91d69f ramips: remove unused include from the common GPIO code 
SVN-Revision: 27381
 2011-07-03 15:01:44 +00:00
Gabor Juhos
c9f3e7082f ramips: disable watchdog on sysupgrade 
SVN-Revision: 27380
 2011-07-03 15:01:43 +00:00
Gabor Juhos
e70e6f6848 ramips: swap target check in image generation 
SVN-Revision: 27379
 2011-07-03 15:01:42 +00:00
Gabor Juhos
affb57ee27 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
 2011-07-03 15:01:41 +00:00
Gabor Juhos
3099ffe414 ramips: set cp0_perfcount_irq for RT305X 
SVN-Revision: 27377
 2011-07-03 15:01:40 +00:00
Daniel Dickinson
f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
 2011-07-03 03:20:04 +00:00
Daniel Dickinson
b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
 2011-07-03 03:14:53 +00:00
Daniel Dickinson
f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." 
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
 2011-07-03 03:14:51 +00:00
Daniel Dickinson
209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
 2011-07-03 03:14:48 +00:00
Daniel Dickinson
88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
 2011-07-03 02:59:00 +00:00
Gabor Juhos
b3a89652a5 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
 2011-07-02 08:37:59 +00:00
Imre Kaloz
ea8440f4c3 cns21xx belongs to the Econa family, too 
SVN-Revision: 27354
 2011-07-02 08:31:25 +00:00
Imre Kaloz
535cae8393 mark it broken 
SVN-Revision: 27349
 2011-07-02 07:26:04 +00:00
Jo-Philipp Wich
701543d3ef revert r27043 (#9513) 
SVN-Revision: 27343
 2011-07-01 19:52:57 +00:00
Jo-Philipp Wich
1edef5ec98 revert r27341, it introduce wrong behaviour for other models 
SVN-Revision: 27342
 2011-07-01 19:15:45 +00:00
Jo-Philipp Wich
3b3103b2f1 turn status LED off if device finished initializing 
SVN-Revision: 27341
 2011-07-01 18:39:53 +00:00
Imre Kaloz
0ba94475c9 upgrade avr32 u-boot to 2011.06 
SVN-Revision: 27330
 2011-07-01 11:32:01 +00:00
Imre Kaloz
84c89fb02d upgrade to 2.6.39.2 
SVN-Revision: 27329
 2011-07-01 11:31:08 +00:00
Imre Kaloz
b655c7c85a preliminary 3.0 support 
SVN-Revision: 27328
 2011-07-01 08:15:48 +00:00
Imre Kaloz
8222c7bb24 add missing kernel symbols 
SVN-Revision: 27327
 2011-07-01 08:11:16 +00:00
Felix Fietkau
a41f80bca1 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) 
SVN-Revision: 27322
 2011-07-01 03:20:13 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Hauke Mehrtens
8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot 
SVN-Revision: 27316
 2011-06-29 17:42:34 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos
74a88749f3 ar71xx: remove 2.6.37 support as well 
SVN-Revision: 27313
 2011-06-29 08:57:36 +00:00
Gabor Juhos
1d5378f588 ar71xx: remove 2.6.38 support 
SVN-Revision: 27312
 2011-06-29 08:57:34 +00:00
Gabor Juhos
36e7a8b33e ar71xx: switch to 2.6.39 
SVN-Revision: 27311
 2011-06-29 08:57:33 +00:00
Gabor Juhos
6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Gabor Juhos
01ac07c9b3 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
SVN-Revision: 27305
 2011-06-29 08:57:25 +00:00
Hauke Mehrtens
8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
 2011-06-28 22:23:21 +00:00
Hauke Mehrtens
4c18da3df6 brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
 2011-06-28 22:21:57 +00:00
Hauke Mehrtens
3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5 
SVN-Revision: 27300
 2011-06-28 20:25:39 +00:00
Hauke Mehrtens
2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628 
SVN-Revision: 27299
 2011-06-28 19:33:50 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Imre Kaloz
e80ebb769f ethernet cleanup and sata fix - thanks, Chris 
SVN-Revision: 27297
 2011-06-28 06:54:20 +00:00
Hauke Mehrtens
4c392185a6 brcm47xx: update kernel to version 2.6.39 
SVN-Revision: 27296
 2011-06-27 21:29:20 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Hauke Mehrtens
e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection. 
SVN-Revision: 27294
 2011-06-27 20:20:11 +00:00
Hauke Mehrtens
c1873c46b8 kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27293
 2011-06-27 20:18:49 +00:00
Jo-Philipp Wich
2c6bd71767 remove remaining uci-defaults 
SVN-Revision: 27291
 2011-06-27 01:42:31 +00:00
Florian Fainelli
9f63b7326f geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
 2011-06-25 22:05:10 +00:00
Florian Fainelli
1f6047496e alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
 2011-06-25 22:05:05 +00:00
Florian Fainelli
3f40c0f7df remove gpiodev, prefer sysfs gpio 
SVN-Revision: 27284
 2011-06-25 19:26:17 +00:00
Felix Fietkau
cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
SVN-Revision: 27283
 2011-06-25 13:54:42 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Florian Fainelli
85d29f3cd0 add missing linux-3.0 config symbol 
SVN-Revision: 27269
 2011-06-24 11:43:30 +00:00
Florian Fainelli
f6e4eb15bc register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
 2011-06-22 12:32:03 +00:00
Florian Fainelli
5a76c6bdd7 fix tab damage in 141-led_count.patch 
SVN-Revision: 27254
 2011-06-21 20:52:58 +00:00
Florian Fainelli
3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
 2011-06-21 20:52:53 +00:00
Hauke Mehrtens
1c0d5f5ae2 kernel: refresh patches for kernel 3.0-rc4 
SVN-Revision: 27247
 2011-06-21 18:39:47 +00:00
Florian Fainelli
9bdf6abb9d use macros to generate SPI registers table and switches 
SVN-Revision: 27246
 2011-06-21 10:05:51 +00:00
Florian Fainelli
6cb3195b40 fix usb mis-cleanup after r27162 (#9581) 
SVN-Revision: 27243
 2011-06-20 10:04:53 +00:00
Jo-Philipp Wich
70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 27241
 2011-06-19 23:05:21 +00:00
Jo-Philipp Wich
9cd64fa754 generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). 
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27237
 2011-06-19 22:48:53 +00:00
Florian Fainelli
ab74628c10 dev-spi.c checks for running CPU, not board code 
SVN-Revision: 27236
 2011-06-19 20:46:00 +00:00
Florian Fainelli
4dd4cbeb43 fixup patches after r27234 
SVN-Revision: 27235
 2011-06-19 20:28:38 +00:00
Florian Fainelli
7819b530da remove accidental bcm6345 related patches 
SVN-Revision: 27234
 2011-06-19 20:16:59 +00:00
Florian Fainelli
12db3df666 remove support for 2.6.37 and 2.6.38 
SVN-Revision: 27233
 2011-06-19 20:14:22 +00:00
Florian Fainelli
6bb0a608dc switch to 2.6.39 
SVN-Revision: 27232
 2011-06-19 20:12:45 +00:00
Florian Fainelli
bcada2640b remove 2.6.35 and 2.6.32 support 
SVN-Revision: 27230
 2011-06-19 20:09:40 +00:00
Florian Fainelli
67d0ca0b4b remove pre 2.6.39 patches and config 
SVN-Revision: 27229
 2011-06-19 20:09:00 +00:00
Florian Fainelli
34db3f9f86 remove 2.6.37 patches and config 
SVN-Revision: 27228
 2011-06-19 20:07:26 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver 
SVN-Revision: 27222
 2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X 
SVN-Revision: 27221
 2011-06-19 13:17:50 +00:00
Hauke Mehrtens
47e218c426 brcm47xx: refresh patches 
SVN-Revision: 27219
 2011-06-18 15:53:14 +00:00
Hauke Mehrtens
79a7343560 kernel: update to kernel 2.6.38.8 
SVN-Revision: 27218
 2011-06-18 15:52:15 +00:00
Hauke Mehrtens
75f9e0c615 brcm47xx: add support for kernel 3.0 
SVN-Revision: 27217
 2011-06-18 15:24:44 +00:00
Rod Whitby
710409740e ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. 
SVN-Revision: 27202
 2011-06-17 11:22:22 +00:00
Florian Fainelli
b97459eb88 add missing USBIP_CORE item in config-3.0 
SVN-Revision: 27195
 2011-06-16 14:34:50 +00:00
Florian Fainelli
540b838998 allow any console to be used 
SVN-Revision: 27193
 2011-06-16 14:34:44 +00:00
Florian Fainelli
426dccd019 bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
 2011-06-16 14:34:40 +00:00
Hauke Mehrtens
235e331987 linux/generic: Add support for 3.0-rc3 
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27191
 2011-06-15 21:31:01 +00:00
Hauke Mehrtens
bf64ac730a bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
 2011-06-15 21:11:49 +00:00
Jo-Philipp Wich
5752efdadd 2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined. 
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27182
 2011-06-15 18:18:32 +00:00
Felix Fietkau
dcddcfca24 add missing kernel config symbols for usb on powerpc 
SVN-Revision: 27181
 2011-06-15 18:07:26 +00:00
Jo-Philipp Wich
d39379296c backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) 
SVN-Revision: 27179
 2011-06-15 14:11:33 +00:00
Jo-Philipp Wich
14913ab8b0 revert r26997, it does not apply against 2.6.36.4 
SVN-Revision: 27178
 2011-06-15 13:51:57 +00:00
Florian Fainelli
685a61eb6c switch to 2.6.39 
SVN-Revision: 27175
 2011-06-14 20:05:13 +00:00
Florian Fainelli
0fb8884efe fix diag.sh with qube2 front led 
SVN-Revision: 27174
 2011-06-14 20:05:09 +00:00
Florian Fainelli
dee0010ae2 resync kernel config 
SVN-Revision: 27173
 2011-06-14 20:05:03 +00:00
John Crispin
0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure 
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
 2011-06-13 22:37:23 +00:00
Florian Fainelli
7a96525a6f replace unfortify patch with a better one 
Thanks to Richard Weinberger for providing this patch

SVN-Revision: 27168
 2011-06-13 12:45:12 +00:00
Gabor Juhos
b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver 
SVN-Revision: 27166
 2011-06-13 08:12:40 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code 
SVN-Revision: 27165
 2011-06-13 08:12:38 +00:00
Florian Fainelli
6a5112a750 cleanup files using checkpatch.pl 
SVN-Revision: 27162
 2011-06-12 19:17:57 +00:00
John Crispin
fa59bb0958 * move patches around * add basic support for gigaset sx76x 
SVN-Revision: 27158
 2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis
70106f153d Remove trailing spaces, convert spaces to tabs 
SVN-Revision: 27153
 2011-06-09 19:30:50 +00:00
John Crispin
e3e2a170cd we dont need 1024 bytes buffer. 128 bytes is enough. 
SVN-Revision: 27143
 2011-06-09 07:08:54 +00:00
John Crispin
8329ecf92c * revert accidental config change 
SVN-Revision: 27142
 2011-06-09 05:10:18 +00:00
John Crispin
ed0e649a5b * fixes spi flash for ar9 
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
 2011-06-08 17:57:55 +00:00
Felix Fietkau
9160e06af5 ar71xx: override inittab to enable login on ttyATH0 
SVN-Revision: 27128
 2011-06-07 17:07:10 +00:00
Florian Fainelli
e7b6721f4e update to 2.6.39.1 
SVN-Revision: 27114
 2011-06-04 18:27:14 +00:00
Florian Fainelli
d97f50b69b define UIMAGE for various rootfs targets 
SVN-Revision: 27113
 2011-06-04 18:27:09 +00:00
Florian Fainelli
429745edd6 use IMG_PREFIX for image name 
SVN-Revision: 27112
 2011-06-04 18:27:04 +00:00
Florian Fainelli
4aaf590909 add more config symbols to 2.6.39 
SVN-Revision: 27111
 2011-06-04 18:27:00 +00:00
Florian Fainelli
89dd8aed1f update to 2.6.39.1 
SVN-Revision: 27110
 2011-06-04 18:26:54 +00:00
Florian Fainelli
72996d2dcb update to 2.6.39.1 
SVN-Revision: 27107
 2011-06-04 13:36:09 +00:00
Florian Fainelli
20c0427132 update to 2.6.39.1 
SVN-Revision: 27106
 2011-06-04 13:36:05 +00:00
Florian Fainelli
de2e05b6f2 add some missing 2.6.39 config symbols 
SVN-Revision: 27105
 2011-06-04 13:36:00 +00:00
Florian Fainelli
763b58c30c update to 2.6.39.1 
patch from Peter Wagner

SVN-Revision: 27104
 2011-06-04 13:35:55 +00:00
Gabor Juhos
13363d9129 ar71xx: setup wdt_clock for AR913X to avoid a kernel bug 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27102
 2011-06-04 12:30:10 +00:00
Gabor Juhos
ae2cbfa1e8 ar71xx: select the internal antenna by default on the ZCN-1523H boards 
SVN-Revision: 27101
 2011-06-04 12:30:09 +00:00
Florian Fainelli
0de25d1263 update to 2.6.39 
SVN-Revision: 27090
 2011-06-02 13:45:20 +00:00
Felix Fietkau
31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos
750af1522b ar71xx: init external_reset for AR933X 
SVN-Revision: 27083
 2011-06-01 13:12:30 +00:00
Gabor Juhos
af4cae4498 ar71xx: add external_reset field to ath9k_platform_data 
SVN-Revision: 27082
 2011-06-01 13:12:28 +00:00
Gabor Juhos
f0c7b93e5d ar71xx: init get_mac_revision on AR9330 rev 1 
SVN-Revision: 27081
 2011-06-01 13:12:27 +00:00
Gabor Juhos
1a54e33c17 ar71xx: add get_mac_revision to ath9k_platform_data 
SVN-Revision: 27080
 2011-06-01 13:12:26 +00:00
Gabor Juhos
34ff32a6eb ar71xx: export SoC revision 
SVN-Revision: 27079
 2011-06-01 13:12:24 +00:00
Imre Kaloz
2440175978 refresh patches 
SVN-Revision: 27078
 2011-06-01 07:24:41 +00:00
Imre Kaloz
aafa838d77 fixup second led, patch from Chris 
SVN-Revision: 27077
 2011-06-01 07:21:25 +00:00
Felix Fietkau
86dbc3a02d ar71xx: add profile and image building code for wzr-hp-ag300h 
SVN-Revision: 27076
 2011-06-01 02:23:30 +00:00
Felix Fietkau
4f06b8263a ar71xx: add kernel support for the buffalo wzr-hp-ag300h 
SVN-Revision: 27075
 2011-06-01 02:23:26 +00:00
Felix Fietkau
56dd5c4388 fix a crash in mtd_concat when the .sync op is not implemented 
SVN-Revision: 27074
 2011-06-01 02:23:22 +00:00
Felix Fietkau
628cb35179 m25p80: add the chip id for the winbond w25q128 chip 
SVN-Revision: 27073
 2011-06-01 02:23:18 +00:00
Imre Kaloz
acbb2db5e2 fixup pcie clock, thanks Chris 
SVN-Revision: 27072
 2011-05-31 23:55:33 +00:00
Gabor Juhos
33fdc21d40 ar71xx: build images for the AP121 boards 
SVN-Revision: 27070
 2011-05-31 22:53:47 +00:00
Gabor Juhos
9e435c03e0 ar71xx: add sysupgrade support for the AP121 boards 
SVN-Revision: 27069
 2011-05-31 22:53:45 +00:00
Gabor Juhos
646937135f ar71xx: add default network config for the AP121 boards 
SVN-Revision: 27068
 2011-05-31 22:53:44 +00:00
Gabor Juhos
f332dbd7be ar71xx: add support for the AP121/AP121-MINI reference boards 
SVN-Revision: 27067
 2011-05-31 22:53:43 +00:00
Gabor Juhos
8beff081eb ar71xx: register UART for the AR933X SoCs 
SVN-Revision: 27066
 2011-05-31 22:53:42 +00:00
Gabor Juhos
b460bc6f12 ar71xx: add serial driver for the AR933X UART 
SVN-Revision: 27065
 2011-05-31 22:53:40 +00:00
Gabor Juhos
c34e0cbc4c ar71xx: add WMAC initialization code for the AR933X SoCs 
SVN-Revision: 27064
 2011-05-31 22:53:39 +00:00
Gabor Juhos
e8a0aaf9a2 ar71xx: add ethernet initialization for the AR933X SoCs 
SVN-Revision: 27063
 2011-05-31 22:53:37 +00:00
Gabor Juhos
e0a0f3796a ar71xx: enable USB support for the AR933x SoCs 
SVN-Revision: 27062
 2011-05-31 22:53:36 +00:00
Gabor Juhos
677c80ee17 ar71xx: add AR933x specific glue for ar71xx_device{start,stop} 
SVN-Revision: 27061
 2011-05-31 22:53:35 +00:00
Gabor Juhos
88c45e3130 ar71xx: the watchdog uses the reference clock on the AR933x SoCs 
SVN-Revision: 27060
 2011-05-31 22:53:34 +00:00
Gabor Juhos
7acbacab8c ar71xx: add AR933x specific glue code for IRQ initialization 
SVN-Revision: 27059
 2011-05-31 22:53:32 +00:00
Gabor Juhos
e6fde61bec ar71xx: don't register 8250 UART on the AR933x SoCs 
SVN-Revision: 27058
 2011-05-31 22:53:31 +00:00
Gabor Juhos
8f7541a044 ar71xx: enable GPIO support for the AR933x SoCs 
SVN-Revision: 27057
 2011-05-31 22:53:30 +00:00
Gabor Juhos
e11b9c8371 ar71xx: add AR933x specific frequency initialization code 
SVN-Revision: 27056
 2011-05-31 22:53:29 +00:00
Gabor Juhos
0bf4478d37 ar71xx: add AR933x specific early_printk support 
SVN-Revision: 27055
 2011-05-31 22:53:27 +00:00
Gabor Juhos
6b3ca9ef0b ar71xx: add preliminary support for the Atheros AR933x SoCs 
SVN-Revision: 27054
 2011-05-31 22:53:26 +00:00
Gabor Juhos
761e67b394 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 27053
 2011-05-31 22:53:25 +00:00
Gabor Juhos
c8d182406d ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards 
SVN-Revision: 27051
 2011-05-31 22:53:22 +00:00
Gabor Juhos
0677e16248 ar71xx: Fix header offset for newer WRT160NL models 
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27049
 2011-05-31 22:53:20 +00:00
Gabor Juhos
be97e2a043 ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols 
SVN-Revision: 27048
 2011-05-31 22:53:19 +00:00
Gabor Juhos
ea2f6d0edf ar71xx: reduce the size of the squashfs-4k binaries 
SVN-Revision: 27047
 2011-05-31 22:53:18 +00:00
Gabor Juhos
5d5f72415e ar71xx: initialize is_clk_25mhz field for AR9340 WMAC 
SVN-Revision: 27045
 2011-05-31 22:53:15 +00:00
Gabor Juhos
f7b3c3dfd1 ar71xx: sync ath9k_platform_data.h with compat-wireless 
SVN-Revision: 27044
 2011-05-31 22:53:14 +00:00
Gabor Juhos
650c7cc2fd ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards 
SVN-Revision: 27043
 2011-05-31 22:53:13 +00:00
Gabor Juhos
4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards 
SVN-Revision: 27042
 2011-05-31 22:53:12 +00:00
Gabor Juhos
60d5abbc27 ar71xx: ag71xx: make ring sizes configurable via ethtool 
SVN-Revision: 27041
 2011-05-31 22:53:10 +00:00
Gabor Juhos
7a2651f633 ar71xx: ag71xx: prepare to make ring sizes configurable 
SVN-Revision: 27040
 2011-05-31 22:53:09 +00:00
Gabor Juhos
669aba3871 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

SVN-Revision: 27039
 2011-05-31 22:53:07 +00:00
Felix Fietkau
9567b93e5c x86: add additional companion chip drivers to alix2 and geos 
Add the MFGPT high precision timers, and integration into the schedule (clock events).

Use OHCI, not UHCI usb module.

Remove VIA SATA driver from Alix2... that was accidentally cloned from net5501 platform.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27038
 2011-05-31 16:57:05 +00:00
Felix Fietkau
68af223efe x86: remove pata-amd driver from generic x86 images, add addition cs553x modules 
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27037
 2011-05-31 16:57:01 +00:00
Mirko Vogt
ba5b3ece5d purge out CONFIG_CRYPTO* symbols out of target specific kernel configs since OpenWrt is taking care of them 
SVN-Revision: 27036
 2011-05-31 09:47:30 +00:00
Felix Fietkau
2b5402d128 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
SVN-Revision: 27035
 2011-05-30 23:08:01 +00:00
Felix Fietkau
0ebc93831f ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
SVN-Revision: 27034
 2011-05-30 23:07:57 +00:00
Imre Kaloz
f738ca7b9c upgrade to 2.6.39 
SVN-Revision: 27030
 2011-05-30 13:55:34 +00:00
John Crispin
6608f419d1 * backport 2.6.8 patches to .39 / .32.33 
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
 2011-05-29 21:19:26 +00:00
Florian Fainelli
016e8dee34 bcm63xx: Add support for 2.6.39 
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27019
 2011-05-27 09:54:52 +00:00
Florian Fainelli
590c82cec1 bcm63xx: Add support for 2.6.38 
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27018
 2011-05-27 09:54:48 +00:00
Florian Fainelli
68cb138154 fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch 
SVN-Revision: 27014
 2011-05-26 13:53:00 +00:00
Florian Fainelli
762885081a renumber patches accordingly 
SVN-Revision: 27013
 2011-05-26 13:52:56 +00:00
Florian Fainelli
2785e3fc12 renumber board patches 
SVN-Revision: 27012
 2011-05-26 12:09:15 +00:00
Hauke Mehrtens
6f7ae75ffa kernel: exportfs: reallow building as a module 
It was originally tristate, but was changed to bool to prevent a build
breakage in an earlier patch revision (for a new syscall). The actual
commit[1] changed it in a way this isn't needed anymore, but
accidentially left the EXPORTFS change in. There's no reason for it
not being buildable as a module, so changing it back to tristate is
fine.

see: https://patchwork.kernel.org/patch/812832/

Thank you Jonas Gorski for the patch.

SVN-Revision: 27011
 2011-05-25 20:57:13 +00:00
Hauke Mehrtens
6769216a64 kernel: generic: Update 2.6.39 to final 
* Add missing config symbols
* Update package/kernel for 2.6.39

CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.

Thank you Jonas Gorski for the patch

SVN-Revision: 27010
 2011-05-25 19:51:40 +00:00
Hauke Mehrtens
c69f2d8788 kernel: some updates for kernel 2.6.39 
* add md5sum for kernel
* add some missing config symbols
* add some ssb patches to make compat-wireless compile

Thank you Peter Wagner for the patch

SVN-Revision: 27009
 2011-05-25 19:32:00 +00:00
Hauke Mehrtens
8137e35a5d brcm47xx: initial 2.6.39 support for brcm47xx 
Thank you Peter Wagner for the patch

SVN-Revision: 27008
 2011-05-25 19:27:08 +00:00
Florian Fainelli
fad3f46f0d fix mtd warnings 
Fixes for the following warnings:

drivers/mtd/devices/block2mtd.c: In function '_open_bdev':
drivers/mtd/devices/block2mtd.c:272:3: warning: ISO C90 forbids mixed declarations and code
drivers/mtd/devices/block2mtd.c: In function 'add_device':
drivers/mtd/devices/block2mtd.c:399:13: warning: assignment discards qualifiers from pointer target type

In the case of 442-block2mtd_probe.patch, it's not until the insertion of a executable statement before the definition that causes a warning, so I've chosen to resolve the issue here by splitting the definition and the initialization into a definition and a statement (and assignment) instead.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27007
 2011-05-25 19:16:58 +00:00
Hauke Mehrtens
f5f989e3fb brcm47xx: remove old kernel 
SVN-Revision: 27006
 2011-05-25 18:05:54 +00:00
Hauke Mehrtens
06166b01dd brcm47xx: fix partition layout on SimpleShare devices. 
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.

SVN-Revision: 27005
 2011-05-25 17:46:34 +00:00
Hamish Guthrie
50d2a84a21 Clean up patch not applying 
SVN-Revision: 26997
 2011-05-24 10:00:36 +00:00
Florian Fainelli
16dfe8b4d1 add support for BT Voyager 2110 (#8810) 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 26959
 2011-05-20 10:06:25 +00:00
Florian Fainelli
6c8387fe15 add support for DSL-2640B rev B2 
Signed-off-by: Adrian Feliks <mexit@o2.pl>

SVN-Revision: 26958
 2011-05-20 10:06:22 +00:00
Florian Fainelli
031ea08ef0 refresh patches 
SVN-Revision: 26957
 2011-05-20 10:06:18 +00:00
Florian Fainelli
3e83f60a66 add support for D-Link DVA-G3810BN/TL 
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

SVN-Revision: 26956
 2011-05-20 10:06:15 +00:00
Florian Fainelli
f9f8dcfa70 refresh 2.6.37 patches 
SVN-Revision: 26955
 2011-05-20 10:06:11 +00:00
Florian Fainelli
f0a99c1692 add support for BT Voyager 2500 (#9070) 
SVN-Revision: 26954
 2011-05-20 10:06:07 +00:00
Florian Fainelli
acf0ec224f add support for USR9108 LEDs (#9372) 
SVN-Revision: 26953
 2011-05-20 10:06:04 +00:00
Florian Fainelli
58b5a2ca7b add GT701 LEDs support (#9382) 
SVN-Revision: 26952
 2011-05-20 10:06:00 +00:00
Daniel Dickinson
f2c86a3835 Simple typo for kmod- prefix in alix2 target makefile. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26945
 2011-05-19 04:29:40 +00:00
Hamish Guthrie
54415a28d6 Remove override of max80211.sh 
SVN-Revision: 26936
 2011-05-18 12:43:54 +00:00
Hamish Guthrie
e7dfadd012 Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh 
SVN-Revision: 26932
 2011-05-18 11:50:36 +00:00
Matteo Croce
17e257925f ar71xx: don't probe the LAN PHY 
SVN-Revision: 26924
 2011-05-17 11:15:24 +00:00
Matteo Croce
4deecea26b ar71xx: detect link on LAN ports 
SVN-Revision: 26922
 2011-05-17 11:12:56 +00:00
John Crispin
dfc19a34b4 * adds support for Artec Thincan 
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>

SVN-Revision: 26919
 2011-05-17 10:35:14 +00:00
Felix Fietkau
894d50da25 kernel: backport some ssb changes to support a mac80211 update 
SVN-Revision: 26911
 2011-05-16 21:50:20 +00:00
Jo-Philipp Wich
d475545c91 remove an accidentally copied comment from the option.ko device patch 
SVN-Revision: 26908
 2011-05-15 21:28:12 +00:00
Jo-Philipp Wich
43e002fe5e add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422) 
SVN-Revision: 26906
 2011-05-15 19:17:31 +00:00
Hauke Mehrtens
a4c0645326 kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches 
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.

SVN-Revision: 26905
 2011-05-15 17:23:02 +00:00
Matteo Croce
2ea528d1d0 ar71xx: add link detection on Ubiquiti devices WAN port 
SVN-Revision: 26891
 2011-05-14 23:31:50 +00:00
Matteo Croce
c0c2e18452 use correct macros and frame size in ag71xx 
SVN-Revision: 26890
 2011-05-14 23:10:06 +00:00
Matteo Croce
99d1d4f795 ar71xx: cosmetic fixes 
SVN-Revision: 26889
 2011-05-14 23:08:00 +00:00
Hamish Guthrie
d6e96fd7d8 Add new defconfig and profile for es variant 
SVN-Revision: 26884
 2011-05-13 11:49:52 +00:00
Hamish Guthrie
abd4a7df35 Squash uids 
SVN-Revision: 26883
 2011-05-13 10:36:39 +00:00
Daniel Dickinson
09e0d10010 Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880. 
SVN-Revision: 26882
 2011-05-13 07:23:11 +00:00
Daniel Dickinson
8d66bf7e72 Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26880
 2011-05-13 06:08:49 +00:00
Daniel Dickinson
937362f270 This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. 
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26879
 2011-05-13 06:06:42 +00:00
Florian Fainelli
9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V 
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
 2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854 bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
 2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
 2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26874
 2011-05-11 13:33:41 +00:00
Florian Fainelli
4ea316216a switch to 2.6.38 
SVN-Revision: 26873
 2011-05-11 13:33:34 +00:00
Florian Fainelli
3fc33726a5 add missing 2.6.38 touchscreen config symbols 
SVN-Revision: 26872
 2011-05-11 13:33:30 +00:00
John Crispin
60c125b8e6 (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC 
This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>

SVN-Revision: 26865
 2011-05-09 15:21:58 +00:00
Gabor Juhos
9b5036a29d ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

SVN-Revision: 26862
 2011-05-08 21:38:51 +00:00
Gabor Juhos
b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
 2011-05-08 21:38:49 +00:00
Gabor Juhos
858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs 
SVN-Revision: 26860
 2011-05-08 21:38:48 +00:00
Gabor Juhos
869f3cb718 ar71xx: remove superfluous fifo_cfg overrides 
SVN-Revision: 26859
 2011-05-08 21:38:46 +00:00
Travis Kemen
bc121d5706 ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht 
SVN-Revision: 26858
 2011-05-08 17:08:06 +00:00
Gabor Juhos
5d77f370d6 ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856
 2011-05-08 16:32:53 +00:00
Gabor Juhos
3711658281 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855
 2011-05-08 13:30:36 +00:00
Gabor Juhos
ef53029870 ar71xx: ag71xx: fix build error if debugfs is enabled 
SVN-Revision: 26854
 2011-05-08 13:30:26 +00:00
Hauke Mehrtens
732abc44cc brcm47xx: update patches 
SVN-Revision: 26846
 2011-05-07 12:49:17 +00:00
Gabor Juhos
8b67d748cb ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
SVN-Revision: 26845
 2011-05-07 12:40:34 +00:00
Gabor Juhos
2166432ba0 ar71xx: ag71xx: add timestamps to ag71xx_buf 
SVN-Revision: 26844
 2011-05-07 12:40:28 +00:00
Gabor Juhos
896e1d1ab4 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
SVN-Revision: 26843
 2011-05-07 12:40:26 +00:00
Gabor Juhos
a6708d20d1 ar71xx: ag71xx: use debugfs_remove_recursive 
SVN-Revision: 26842
 2011-05-07 12:40:25 +00:00
Gabor Juhos
c39e5b9360 ar71xx: override wmac device name for the AR934x SoCs 
SVN-Revision: 26840
 2011-05-07 09:23:32 +00:00
Florian Fainelli
fbbe154a48 remove useless patches 
SVN-Revision: 26837
 2011-05-06 12:37:40 +00:00
Florian Fainelli
de02a2795b fill maintainer infos for a couple of targets 
SVN-Revision: 26836
 2011-05-06 12:37:36 +00:00
Florian Fainelli
1adaa8790d update to 2.6.38.2 
SVN-Revision: 26833
 2011-05-05 16:35:44 +00:00
Florian Fainelli
fd33dffe60 add missing 2.6.38 symbols 
SVN-Revision: 26832
 2011-05-05 16:35:40 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
54fb8868fa brcm47xx: fix typo in patch 
SVN-Revision: 26828
 2011-05-05 13:18:35 +00:00
Alexandros C. Couloumbis
7fb06ce6cd linux/ar71xx: add some missing symbols for nand/yaffs targets 
SVN-Revision: 26827
 2011-05-05 07:19:46 +00:00
Alexandros C. Couloumbis
c27ffb1912 linux/generic: port yaffs to 2.6.39 
SVN-Revision: 26818
 2011-05-04 09:35:06 +00:00
Alexandros C. Couloumbis
67339c1329 linux/rb532: use kernel and initramfs tags on image generation 
SVN-Revision: 26817
 2011-05-04 08:47:00 +00:00
Jo-Philipp Wich
ae5435adc9 geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform. 
SVN-Revision: 26811
 2011-05-03 21:18:12 +00:00
Florian Fainelli
a18ec3c37e update to 2.6.38 
SVN-Revision: 26803
 2011-05-02 07:57:25 +00:00
Felix Fietkau
af53fa1d91 cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver 
SVN-Revision: 26802
 2011-05-02 00:28:30 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Felix Fietkau
f9a92812cf cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k 
SVN-Revision: 26797
 2011-05-01 15:53:56 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
SVN-Revision: 26779
 2011-04-28 21:27:42 +00:00
Felix Fietkau
eb270c4d33 ar8316: automatically detect whether port4 is used as PHY or as a switch port 
SVN-Revision: 26778
 2011-04-28 21:27:37 +00:00
Felix Fietkau
36aecb08b8 ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
SVN-Revision: 26777
 2011-04-28 19:30:49 +00:00
Felix Fietkau
2336d4b438 ar8216: support AR8316 rev 0 devices 
SVN-Revision: 26776
 2011-04-28 19:30:43 +00:00
Alexandros C. Couloumbis
8b7a516fa8 linux/atheros: add 2.6.38 preliminary support 
SVN-Revision: 26772
 2011-04-27 17:18:03 +00:00
Felix Fietkau
9e8cd78944 swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK 
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26770
 2011-04-26 23:05:29 +00:00
Alexandros C. Couloumbis
edfcbe5705 linux/adm5120: update wget2nand script 
SVN-Revision: 26748
 2011-04-21 13:18:33 +00:00
Alexandros C. Couloumbis
f13581eedb linux/ar71xx: update wget2nand script 
SVN-Revision: 26747
 2011-04-21 12:38:25 +00:00
Alexandros C. Couloumbis
015b010f90 linux/ar71xx: add 2.6.38 preliminary support 
SVN-Revision: 26746
 2011-04-21 11:45:23 +00:00
Felix Fietkau
a2687e8d6d uml: fix the kernel config name override 
SVN-Revision: 26715
 2011-04-17 21:47:49 +00:00
Felix Fietkau
ae51f1972f x86: remove 2.6.35 patches 
SVN-Revision: 26710
 2011-04-17 18:39:50 +00:00
Felix Fietkau
1fcd26091b brcm63xx: remove patches/configs for 2.6.35 
SVN-Revision: 26709
 2011-04-17 18:39:46 +00:00
Felix Fietkau
8566daa5df au1000: remove patches/configs for 2.6.35 
SVN-Revision: 26708
 2011-04-17 18:39:42 +00:00
Felix Fietkau
f5d3d0e7d8 ar7: remove patches/configs for old kernel versions 
SVN-Revision: 26707
 2011-04-17 18:39:38 +00:00
Felix Fietkau
64f67b9c2a adm5120: remove patches/configs for unused kernel versions 
SVN-Revision: 26706
 2011-04-17 18:39:32 +00:00
Felix Fietkau
ede6b0d360 rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs. 
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.

Signed-off-by: Jochen Friedrich <jochen@scram.de>

SVN-Revision: 26705
 2011-04-17 18:32:28 +00:00
Felix Fietkau
5a0df036b0 Remove 2.6.35. It's not used anymore. 
Signed-off-by: Jochen Friedrich <jochen@scram.de>

SVN-Revision: 26704
 2011-04-17 18:32:21 +00:00
Daniel Dickinson
8b18ce6807 Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. 
SVN-Revision: 26699
 2011-04-17 01:15:47 +00:00
Felix Fietkau
dcffeb99e2 ixp4xx: backport an upstream commit to fix gspca compile errors triggered by the buildbot 
SVN-Revision: 26698
 2011-04-16 21:30:48 +00:00
Felix Fietkau
f385231730 fix a typo in the kernel patch description 
SVN-Revision: 26693
 2011-04-16 18:40:23 +00:00
Felix Fietkau
a1624421ae kernel: reorganize 2.6.37 patches 
SVN-Revision: 26692
 2011-04-16 18:31:21 +00:00
Felix Fietkau
3fa43f54a2 kernel: reorganize 2.6.39 patches 
SVN-Revision: 26691
 2011-04-16 18:31:05 +00:00
Felix Fietkau
71d8c66250 kernel: reorganize 2.6.38 patches, clean up block2mtd patches 
SVN-Revision: 26690
 2011-04-16 18:30:57 +00:00
Felix Fietkau
4a6e01fa38 kernel: add a PATCHES text file describing the new patch categories 
SVN-Revision: 26689
 2011-04-16 18:30:51 +00:00
Felix Fietkau
2066c21c92 kernel: backport the fix "net_sched: fix ip_tos2prio" for 2.6.37 Fixes a bug that led to ECN enabled flows being de-prioritized by pfifo_fast 
SVN-Revision: 26687
 2011-04-16 01:46:57 +00:00
Daniel Dickinson
0d722113b9 Generate images for RTA1320_16M-based routers 
SVN-Revision: 26681
 2011-04-15 14:31:36 +00:00
Daniel Dickinson
f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field 
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
 2011-04-15 12:18:25 +00:00
Daniel Dickinson
ff1bc5c29d x86: missing kernel symbols 
Please include these two missing kernel CONFIG_ symbols.

SVN-Revision: 26679
 2011-04-15 04:56:49 +00:00
Daniel Dickinson
4021469e4a geos: Add PC speaker to kernel definitions 
Add the PC speaker back to the Geos platform.

Add DMI support in BIOS.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26678
 2011-04-15 04:51:05 +00:00
Felix Fietkau
e6350dee82 adm5120: fix promiscuous mode handling (patch from #8581) 
SVN-Revision: 26673
 2011-04-15 00:20:59 +00:00
Felix Fietkau
cddc775ee8 ar71xx: enable the ip17xx PHY driver (fixes #5193, #8027) 
SVN-Revision: 26670
 2011-04-14 23:51:12 +00:00
Alexandros C. Couloumbis
05e533ba4d linux/adm5120: generate non-initramfs kernel images too 
SVN-Revision: 26657
 2011-04-14 09:59:13 +00:00
Alexandros C. Couloumbis
da323cc470 linux/adm5120: preliminary 2.6.38 config options 
SVN-Revision: 26648
 2011-04-13 16:47:26 +00:00
Alexandros C. Couloumbis
54d4dc56c5 linux/adm5120: add 2.6.38 preliminary support 
SVN-Revision: 26647
 2011-04-13 16:42:03 +00:00
Felix Fietkau
92bd56fea1 ar71xx: replace the madwifi profile with an ath5k profile 
SVN-Revision: 26626
 2011-04-12 21:10:45 +00:00
Jo-Philipp Wich
76bfcee5ea gzip jffs2 images Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> 
SVN-Revision: 26625
 2011-04-12 20:48:47 +00:00
Jo-Philipp Wich
d1f053d7ef Enable padding of jffs2 images to user specified filesystem size Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> 
SVN-Revision: 26624
 2011-04-12 20:46:34 +00:00
Felix Fietkau
0959467583 solos: various upstreamed solos patches 
These patches were submitted to netdev and will likely be out in 2.6.38.3.
In the meantime, they're needed in 2.6.37.6.
Patch by Philip Prindeville

SVN-Revision: 26616
 2011-04-12 19:50:15 +00:00
Felix Fietkau
127e4ebd32 generic: Add support for 2.6.39 
Add support for 2.6.39 based on rc3. Runtime tested on bcm63xx.

SVN-Revision: 26615
 2011-04-12 19:39:20 +00:00
Hamish Guthrie
f4f4ace363 Change partition table layout 
SVN-Revision: 26607
 2011-04-12 14:16:32 +00:00
Gabor Juhos
fa9f45f345 ar71xx: fix build error w/o CONFIG_PCI 
SVN-Revision: 26606
 2011-04-12 13:14:56 +00:00
Gabor Juhos
adb6217471 ar71xx: don't hardcode console parameters in kernel config 
SVN-Revision: 26605
 2011-04-12 13:14:53 +00:00
Gabor Juhos
e193547733 ar71xx: use the gpio_keys_polled driver instead of gpio_buttons 
SVN-Revision: 26603
 2011-04-12 09:29:21 +00:00
Gabor Juhos
54ede24829 ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
 2011-04-12 09:29:10 +00:00
Gabor Juhos
f358166236 generic: rtl8366{s,rb}: remove the PHY driver. 
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26600
 2011-04-12 09:29:07 +00:00
Gabor Juhos
e28b459b21 generic: add support for the MX25L1606E SPI flash 
SVN-Revision: 26596
 2011-04-11 17:37:13 +00:00
Gabor Juhos
ef4c1d49a6 ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac 
SVN-Revision: 26595
 2011-04-11 17:37:08 +00:00
Gabor Juhos
4711dea8ff ar71xx: fix AR934X_WMAC_SIZE 
SVN-Revision: 26594
 2011-04-11 17:37:03 +00:00
Felix Fietkau
22285a76e5 atheros: use ath5k instead of madwifi 
SVN-Revision: 26588
 2011-04-11 03:26:58 +00:00
Felix Fietkau
4697a30c05 atheros: remove bogus wlan device mask checks 
SVN-Revision: 26585
 2011-04-11 03:25:59 +00:00
Florian Fainelli
247a688ca5 drop 005-au1000_phy_addr.patch, upstream is fixed 
SVN-Revision: 26580
 2011-04-10 18:25:56 +00:00
Hauke Mehrtens
aed622fd2c amazon: Upgrade amazon target to kernel 2.6.37 
This was just a little bit tested on an SAMSUNG SMT-G3020 and pci and usb do not work like before.

SVN-Revision: 26576
 2011-04-10 15:08:28 +00:00
Hauke Mehrtens
74a5c8148a at91: add some missing config options 
SVN-Revision: 26571
 2011-04-09 23:36:26 +00:00
Hauke Mehrtens
2ce13f05cb kernel: add symbols, small fixes 
* Some module should be loaded later to load them after the modules they are depending on
* add some more missing config symbols
* make CS5535 build again

SVN-Revision: 26570
 2011-04-09 23:34:20 +00:00
Gabor Juhos
8586e61b00 ar71xx: fix section mismatch 
SVN-Revision: 26562
 2011-04-09 18:47:55 +00:00
Gabor Juhos
a8bf5e3cdb ar71xx: rename ar934x_ref_freq to ar71xx_ref_freq 
Also initialize that for each SoC and print its value along with the
other frequencies.

SVN-Revision: 26561
 2011-04-09 18:47:52 +00:00
Gabor Juhos
5573d6eb28 ar71xx: show the SoC type earlier 
SVN-Revision: 26560
 2011-04-09 18:47:50 +00:00
Gabor Juhos
ab4c3b3a1c ar71xx: cleanup SoC detection code 
SVN-Revision: 26559
 2011-04-09 18:47:49 +00:00
Gabor Juhos
694d9059c9 ar71xx: sync kernel configuration 
SVN-Revision: 26558
 2011-04-09 18:47:45 +00:00
Gabor Juhos
3310c70702 ar71xx: Fix mac address offset for AR934x 
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>

SVN-Revision: 26557
 2011-04-09 18:47:42 +00:00
Felix Fietkau
7486cf730a atheros: merge a few patches into the right place 
SVN-Revision: 26556
 2011-04-09 18:26:03 +00:00
Felix Fietkau
63c08f0f0b atheros: fix up empty radio data mac address (based on patch from #8601) 
SVN-Revision: 26555
 2011-04-09 18:25:59 +00:00
Felix Fietkau
4eb507901a atheros: fix ath5k support on ar2315/2317 
- Use physical addresses definition for AR2315 the same way as AR5312. Fixes ioremap
- Fix dma mapping for AHB bus (only use the PCI DMA offset for PCI devices)

Based on patches by Wojciech Dubowik

SVN-Revision: 26554
 2011-04-09 18:25:55 +00:00
Felix Fietkau
cf3adeaa22 atheros: enable CONFIG_IP17XX_PHY to add back switch support for the DIR-300 
SVN-Revision: 26553
 2011-04-09 18:25:51 +00:00
Hauke Mehrtens
bba5f37bb8 kernel: add missing config options 
SVN-Revision: 26552
 2011-04-09 17:39:44 +00:00
Hauke Mehrtens
8b837430f3 brcm47xx: upgrade to kernel 2.6.27.6. 
This should be save now.

SVN-Revision: 26533
 2011-04-08 15:12:08 +00:00
Jo-Philipp Wich
1340b0b98e Bump kernel version to 2.6.37.6 
SVN-Revision: 26525
 2011-04-07 21:54:29 +00:00
Hauke Mehrtens
340c6914a3 brcm47xx: add initial support for kernel 2.6.38 
SVN-Revision: 26524
 2011-04-07 21:38:41 +00:00
Gabor Juhos
8f889f9250 ar71xx: add DB120 board specific PCI initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26523
 2011-04-07 20:53:41 +00:00
Gabor Juhos
a0c3d49064 ar71xx: register WMAC device on the DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26522
 2011-04-07 20:53:37 +00:00
Gabor Juhos
428888faec ar71xx: add support for the built-in WMAC of the AR934x 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26521
 2011-04-07 20:53:34 +00:00
Gabor Juhos
13b1bd2ec2 ar71xx: create a separate profile for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26520
 2011-04-07 20:53:25 +00:00
Gabor Juhos
72c84e6876 ar71xx: build firmware image for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26519
 2011-04-07 20:53:23 +00:00
Gabor Juhos
14b42c44ec ar71xx: add initial support for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26518
 2011-04-07 20:53:19 +00:00
Gabor Juhos
f6ae4bf15f ar71xx: indicate AR934x support in menuconfig 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26517
 2011-04-07 20:53:14 +00:00
Gabor Juhos
2b064bb398 ar71xx: add support for the watchdog of the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26516
 2011-04-07 20:53:10 +00:00
Gabor Juhos
e4555809c7 ar71xx: enable PCI for the AR934[24] SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26515
 2011-04-07 20:53:05 +00:00
Gabor Juhos
4f395745af ar71xx: enable USB support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26514
 2011-04-07 20:53:03 +00:00
Gabor Juhos
25693b4769 ar71xx: enable GPIO support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26513
 2011-04-07 20:53:00 +00:00
Gabor Juhos
334a5ec36e ar71xx: add AR934x specific glue for ar7100_device{start,stop} 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26512
 2011-04-07 20:52:57 +00:00
Gabor Juhos
ccd3ebd309 ar71xx: add AR934x specific UART clock initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26511
 2011-04-07 20:52:53 +00:00
Gabor Juhos
91470edada ar71xx: add AR934x specific glue for IRQ initialization 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26510
 2011-04-07 20:52:49 +00:00
Gabor Juhos
3b209880bc ar71xx: add initial support for the AR934x SoCs 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

SVN-Revision: 26509
 2011-04-07 20:52:45 +00:00
Gabor Juhos
d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN 
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
 2011-04-04 08:43:07 +00:00
Felix Fietkau
e00dcbc593 x86/geos: redux of cs5535 version 
The previous technique didn't work with "make defconfig" correctly.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 26458
 2011-04-03 23:30:26 +00:00
Florian Fainelli
8ce6588a46 create an initramfs image by default 
SVN-Revision: 26453
 2011-04-03 18:30:49 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Hauke Mehrtens
0301e07074 kernel: l2tp: fix possible oops on l2tp_eth module unload 
SVN-Revision: 26440
 2011-04-03 13:20:41 +00:00
Felix Fietkau
9fd59ccf99 kernel: add a missing kconfig symbol for 2.6.38 
SVN-Revision: 26417
 2011-04-02 19:48:45 +00:00
Felix Fietkau
0508ee0c00 rtl8306: do not overwrite registers in the phy fixup, it could mess up other switches (fixes #8911) 
SVN-Revision: 26410
 2011-04-02 16:35:22 +00:00
Felix Fietkau
730a3afab7 kernel: add a missing dependency for the mv_cesa crypto driver 
SVN-Revision: 26406
 2011-04-02 15:25:22 +00:00
John Crispin
ba4dd89063 remove unknown package names from DEFAULT:= 
SVN-Revision: 26403
 2011-04-02 12:56:11 +00:00
Felix Fietkau
6b183fe564 kernel: the cryptosoft module of ocf needs cryptoapi manager support (for blkcipher, hash) 
SVN-Revision: 26402
 2011-04-02 12:50:50 +00:00