openwrtv3

Author	SHA1	Message	Date
Florian Fainelli	b363a7e491	add support for Linux 3.6 SVN-Revision: 34154	2012-11-11 18:41:09 +00:00
Florian Fainelli	854c504781	move files directory to files-3.3 SVN-Revision: 34153	2012-11-11 18:40:48 +00:00
Hauke Mehrtens	cadd36a303	brcm47xx: remove ssb-gige package CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. SVN-Revision: 34150	2012-11-11 17:30:33 +00:00
Florian Fainelli	62c9156af6	generate image for AC49x Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34149	2012-11-11 16:11:39 +00:00
Florian Fainelli	9c7d221d47	create AC49x subtarget Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34148	2012-11-11 16:11:34 +00:00
Florian Fainelli	668234c109	create generic subtarget Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34147	2012-11-11 16:11:29 +00:00
Florian Fainelli	4891549bcd	detect AC49x flash partitions Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34146	2012-11-11 16:11:22 +00:00
Florian Fainelli	feb968d964	support AC49x bootloader environment Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34145	2012-11-11 16:11:14 +00:00
Florian Fainelli	7d09c61d65	add AudioCodes AC49x platform support to kernel Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34144	2012-11-11 16:11:09 +00:00
Florian Fainelli	d9b89db380	free memory below kernel offset Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that memory region so it is usable for Linux. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34143	2012-11-11 16:11:00 +00:00
Jo-Philipp Wich	298a8e2300	x86/generic: don't disable usbfs (#12452 ) SVN-Revision: 34139	2012-11-10 23:28:58 +00:00
Jonas Gorski	c54fa281b1	bcm63xx: fix compilation with kmod-ohci enabled with 3.6 Fixes the following error: drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start': drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration] Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34138	2012-11-10 22:10:47 +00:00
Jonas Gorski	15519bec9c	bcm63xx: add two missing usb patches to 3.6 SVN-Revision: 34137	2012-11-10 19:59:16 +00:00
Jonas Gorski	06ad6ffe16	bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 SVN-Revision: 34136	2012-11-10 19:59:07 +00:00
Imre Kaloz	f3f3f52259	cns3xxx: clean up pcie patches Combine two pcie patches (2nd patch undid the 1st patch) together and refresh the other affected patches Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34132	2012-11-09 21:37:54 +00:00
John Crispin	71ddec8091	add more profiles SVN-Revision: 34131	2012-11-09 19:26:58 +00:00
John Crispin	88e4d93802	a few more dts files (WIP) SVN-Revision: 34130	2012-11-09 19:26:43 +00:00
John Crispin	a30b3066ce	add mtd split and atm patch SVN-Revision: 34129	2012-11-09 19:26:30 +00:00
Felix Fietkau	46288bf98e	x86: use $(strip) for the at_keyboard check SVN-Revision: 34127	2012-11-09 10:53:36 +00:00
Felix Fietkau	0a9e05fb0e	x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) SVN-Revision: 34126	2012-11-09 10:19:51 +00:00
Gabor Juhos	502661f685	generic: sanitize deps_initramfs list If any filename in the intramfs dependency list contains a colon, that causes a kernel build error like this: /devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: * multiple target patterns. Stop. make[5]: * [usr] Error 2 Fix it by removing such filenames from the deps_initramfs list. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34125	2012-11-09 09:07:29 +00:00
Luka Perkov	965c190444	cns3xxx: exit from laguna late_initcall if not running on laguna board SVN-Revision: 34120	2012-11-08 11:31:56 +00:00
Imre Kaloz	0da0dc0f2b	cns3xxx: add PPS support for laguna Many Laguna products have on-board GPS with Pulse-per-second (PPS) support. This patch adds kernel support (statically) and adds the platform data in laguna board support. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34115	2012-11-08 05:42:31 +00:00
Imre Kaloz	efcdc21824	fixup symbol selection SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU, ARCH_CNS3XXX already selects MIGHT_HAVE_PCI SVN-Revision: 34114	2012-11-08 05:40:34 +00:00
Luka Perkov	4d66b749de	cns3xxx: fix coding style in board script SVN-Revision: 34113	2012-11-07 23:12:06 +00:00
John Crispin	6090ddc896	adds fon20n profile SVN-Revision: 34112	2012-11-07 20:26:31 +00:00
John Crispin	3991526989	ramips: use kernel 3.6.6 ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \| \|.-----.-----.-----.\| \| \| \|.----.\| \|_ \| - \|\| _ \| -__\| \|\| \| \| \|\| _\|\| _\| \|_______\|\| __\|_____\|__\|__\|\|________\|\|__\| \|____\| \|__\| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# SVN-Revision: 34111	2012-11-07 20:26:21 +00:00
John Crispin	480892226d	ramips: add HAVE_CLK to Kconfig on all ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110	2012-11-07 20:26:04 +00:00
John Crispin	feb31be6af	ramips: add linux-3.6 configuration for ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 SVN-Revision: 34109	2012-11-07 20:25:55 +00:00
John Crispin	ca1fcaed5b	ramips: port patches to linux-3.6 Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch SVN-Revision: 34108	2012-11-07 20:25:34 +00:00
Jonas Gorski	f2bb7754f5	bcm63xx: Enable endian check support for ath9k pci fixup. Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34105	2012-11-07 09:01:03 +00:00
Imre Kaloz	f2b75b517b	fixup typos in the compex patch SVN-Revision: 34104	2012-11-07 07:51:24 +00:00
Jonas Gorski	a50d121d8e	linux: export bcm963xx_tag.h to userspace Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 34103	2012-11-06 15:21:46 +00:00
Luka Perkov	865933a0ec	cns3xxx: refresh kernel config file SVN-Revision: 34102	2012-11-06 11:16:43 +00:00
Luka Perkov	9a5c26d4ef	cns3xxx: use files directory SVN-Revision: 34101	2012-11-06 11:16:41 +00:00
John Crispin	7404e59bbd	add OWRTDTB marker patch SVN-Revision: 34100	2012-11-06 10:39:43 +00:00
John Crispin	3a1851964e	add support for arv7525 SVN-Revision: 34097	2012-11-06 07:38:24 +00:00
Imre Kaloz	e141cbb0f9	refresh patches SVN-Revision: 34095	2012-11-06 05:45:12 +00:00
Imre Kaloz	1a9dfd566e	add default packages SVN-Revision: 34094	2012-11-06 05:39:08 +00:00
Jonas Gorski	0722fd9c63	linux: generic: fix split_squashfs for 3.6 _read expects the retlen to be initialized to zero, which the mtd_read helper does. So fix it by using mtd_read instead of calling _read directly. SVN-Revision: 34093	2012-11-06 00:48:21 +00:00
Jonas Gorski	5bc7d81a20	bcm63xx: fix SPW303V images SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. SVN-Revision: 34091	2012-11-05 22:50:29 +00:00
Gabor Juhos	e92da5e7ae	ar71xx: nuke ath79_set_usb_power_gpio helper It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34088	2012-11-05 13:23:28 +00:00
Gabor Juhos	f2528b1792	ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34087	2012-11-05 13:23:27 +00:00
Gabor Juhos	e8669729bc	kernel: update linux 3.6 to 3.6.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34086	2012-11-05 13:22:09 +00:00
Imre Kaloz	d822ecfdf8	use the mainline machname for the compex boards SVN-Revision: 34083	2012-11-05 11:38:23 +00:00
Gabor Juhos	a0dd47bbed	ramips: enable USB power on the DIR-645 Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082	2012-11-05 11:04:45 +00:00
Gabor Juhos	5e43b934fd	linux/3.3: backport an upstream GPIO patch The backported patch introduces new flags to automatically export GPIOs when using the convenience unctions gpio_request_one() or gpio_request_array(). This will be used by ar71xx/ramips platforms. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34081	2012-11-05 11:04:43 +00:00
Gabor Juhos	829aaedcbf	ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34078	2012-11-05 06:58:53 +00:00
Gabor Juhos	ed35253f4c	ar71xx: don't use the unknown LED on the ZCN-1523-5 board According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076	2012-11-04 22:08:54 +00:00
Gabor Juhos	1b744e1ca5	ar71xx: include mtd layout in the command line for ZCN-1523H-* boards Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34074	2012-11-04 21:12:20 +00:00
Gabor Juhos	b78a736dc2	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34072	2012-11-04 20:15:18 +00:00
Felix Fietkau	6040b1d29a	linux-3.6: fix portability of some includes files in tools/ used on the host SVN-Revision: 34068	2012-11-04 17:01:15 +00:00
John Crispin	05fbb370dc	3.6 is not the default yet SVN-Revision: 34065	2012-11-03 13:29:44 +00:00
John Crispin	a9ad36b7f1	adds dts files and make devicetree images buildable SVN-Revision: 34064	2012-11-02 20:07:47 +00:00
John Crispin	c8ae6dac56	update ase target for 3.6 SVN-Revision: 34063	2012-11-02 20:07:41 +00:00
John Crispin	dc8641f7fa	add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062	2012-11-02 20:07:36 +00:00
John Crispin	dd619da4fc	adds 3.6 files, patches and config SVN-Revision: 34061	2012-11-02 20:07:26 +00:00
John Crispin	736835343c	move files/ -> files-3.3/ SVN-Revision: 34060	2012-11-02 20:07:02 +00:00
John Crispin	fa316620a7	prepare Makefile for 3.6 SVN-Revision: 34059	2012-11-02 20:06:51 +00:00
Gabor Juhos	0005762690	generic: make yaffs work on 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34054	2012-11-01 11:07:23 +00:00
Gabor Juhos	ffcb4b0fe1	generic: rename jffs2 patches Make room for the upcoming yaffs patches. No functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34053	2012-11-01 11:07:16 +00:00
Gabor Juhos	6c8c3ee77d	generic: use mtd_* helpers in the yaffs code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34046	2012-10-31 21:17:30 +00:00
Imre Kaloz	3c12bad276	move PCIe init to subsys init call ARM Linux PCI/PCIe hardware intialization needs to occur before device_init as it does not support hotplug. I have modeled the cns3xxx PCIe init after other ARM platforms. Registering it early resolves resource issues occuring during bus enumeration that occur when a device driver is linked static in the kernel. Instead of passing in a bitmask to enable the 2 available ports, link detect is used to enable ports that have a valid link. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 34044	2012-10-31 20:16:53 +00:00
Gabor Juhos	07a762c4c5	kernel: update linux 3.6 to 3.6.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34042	2012-10-31 20:09:39 +00:00
Gabor Juhos	a4126685c6	generic: split yaffs-3.2-fix patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34041	2012-10-31 19:33:12 +00:00
Gabor Juhos	4baeb543f0	generic: replace yaffs-2.6.39 patch Use backported upstream patches instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34032	2012-10-31 15:12:45 +00:00
Gabor Juhos	b888c2deab	generic: replace yaffs mutex_fix patch Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34021	2012-10-30 21:16:24 +00:00
Gabor Juhos	d54782d01a	generic: replace yaffs symlink fix patch Use a backported patch instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34020	2012-10-30 21:16:23 +00:00
Gabor Juhos	9a8ccc1a08	generic: rename yaffs patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34019	2012-10-30 21:16:21 +00:00
Florian Fainelli	e14e4306c9	set earlyprintk UART to be the default Realview UART SVN-Revision: 34015	2012-10-30 16:56:10 +00:00
Gabor Juhos	449f88df0f	generic: fold yaffs_git_2010_10_20 patch to generic/files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34013	2012-10-30 14:58:17 +00:00
Gabor Juhos	56190ed0fc	generic: fold yaffs_cvs_2009_04_24 patch to generic/files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34012	2012-10-30 14:58:13 +00:00
Gabor Juhos	7228a91a3b	ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33993	2012-10-29 17:24:30 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Imre Kaloz	c0c69c974f	add missing 3.6 symbols SVN-Revision: 33986	2012-10-29 10:00:02 +00:00
Imre Kaloz	8e49dfe68a	the uImage's filename will hardly change SVN-Revision: 33985	2012-10-29 09:55:20 +00:00
Gabor Juhos	f7b2089704	generic: add more symbols for 3.6 Also refresh the config file with kconfig.pl. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33984	2012-10-29 09:08:59 +00:00
Gabor Juhos	e4db63fd64	ar71xx: add initial support for 3.6 The nand subtarget is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33983	2012-10-28 19:52:02 +00:00
Gabor Juhos	87186c5ed4	kernel: update linux 3.6 to 3.6.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33982	2012-10-28 18:59:39 +00:00
Gabor Juhos	a6549ac1cb	ar71xx: remove NO_AUTOINCR flag from the NAND drivers The flag is not present in 3.6. Also add compatibility patches for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33971	2012-10-28 12:21:15 +00:00
Gabor Juhos	9a37cf7ec6	generic: fix crashlog patch for 3.6 kmsg_dump() uses an iterator to receive log buffer content since 3.5. Change the 'crashlog_do_dump' function in order to make it compatible with the new version. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33970	2012-10-28 09:50:50 +00:00
Gabor Juhos	e2ec99889e	ar71xx: ag71xx: fix build_skb arguments for 3.6 Also add a compatibility patch for 3.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33969	2012-10-27 17:11:06 +00:00
Gabor Juhos	7640a7cc24	generic: fix tcp_window_check patch for 3.6 Move the new entry to the end of the tcp_sysctl_table array to fix the following error: [ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data [ 7.680000] Call Trace: [ 7.680000] [<80273bc4>] dump_stack+0x8/0x34 [ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8 [ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack] [ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack] [ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4] [ 7.710000] [ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed [ 7.720000] nf_conntrack_ipv4: can't register pernet ops [ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0) [ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0) [ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0) [ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0) [ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0) [ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0) [ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0) [ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) [ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0) [ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33968	2012-10-27 15:42:25 +00:00
Imre Kaloz	50be09e1f7	instead of updating the whole file, just add the additional boards SVN-Revision: 33966	2012-10-27 13:29:36 +00:00
Imre Kaloz	1a4f117398	rename erase size variables SVN-Revision: 33964	2012-10-27 10:50:55 +00:00
Imre Kaloz	549d5a6e34	add support for Netgear WN802T SVN-Revision: 33963	2012-10-27 10:48:22 +00:00
Imre Kaloz	cf7aed0a76	don't enforce rootfs location SVN-Revision: 33962	2012-10-27 10:43:47 +00:00
Imre Kaloz	702fd5cdb5	generate images for the D-Link DWL-3150 as well SVN-Revision: 33961	2012-10-27 09:42:58 +00:00
Gabor Juhos	3a86affcdd	ar71xx: enable sysupgrade for the CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33960	2012-10-27 08:55:42 +00:00
Gabor Juhos	e99d557c08	ar71xx: add profile and build image for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33958	2012-10-27 08:55:40 +00:00
Gabor Juhos	9287e0c863	ar71xx: add user-space part for the CAP4200AG Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33957	2012-10-27 08:55:39 +00:00
Gabor Juhos	d54c9653e9	ar71xx: add support for the Senao CAP4200AG board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33956	2012-10-27 08:55:38 +00:00
Gabor Juhos	3b7cb4eb4a	ar71xx: add ath79_wmac_disable_[25]ghz helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33955	2012-10-27 08:55:37 +00:00
Gabor Juhos	e8fc46b7c5	generic: allow to disable [25]GHz support in ath9k via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33954	2012-10-27 08:55:36 +00:00
Gabor Juhos	c92998f9d9	generic: use mtd_read in myloader parser Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33952	2012-10-27 07:57:59 +00:00
Gabor Juhos	269872fe1e	ar71xx: use mtd_read in wrt160nl_part Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33951	2012-10-27 07:57:58 +00:00
Gabor Juhos	973eda6077	ar71xx: use mtd_read in tplinkpart Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33950	2012-10-27 07:57:57 +00:00
Gabor Juhos	28f3adc2ed	ar71xx: generate 4,8,16M images for the WPE72 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33949	2012-10-27 07:57:55 +00:00
Gabor Juhos	ee9376d153	generic: swconfig: use led_set_brightness in LED control code The 'led_brightness_set' function has been renamed to 'led_set_brightness' in recent ernels. Use the new name and add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33946	2012-10-26 18:58:18 +00:00
Gabor Juhos	1127781d40	generic: add missing symbols for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33945	2012-10-26 18:58:15 +00:00
Gabor Juhos	ff481a5518	ar71xx: reject TP-Link images containing a bootloader The original TP-Link firmware images can be flashed via the sysupgrade command, however those may contain a bootloader. Flashing such an image via sysupgrade bricks the board, and it can't be recovered without a serial console. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33944	2012-10-26 18:58:13 +00:00
Gabor Juhos	db5eea6acd	ramips: use correct key code for the RFKILL switch on the TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943	2012-10-26 18:53:44 +00:00
Florian Fainelli	c691d165c7	add 3.6 kernel configuration SVN-Revision: 33942	2012-10-26 15:24:19 +00:00
Florian Fainelli	9af90aa80c	add missing 6345 clock bits patch to 3.6 patches SVN-Revision: 33941	2012-10-26 15:24:14 +00:00
Florian Fainelli	fad6afdf06	add some more 3.6 config symbols SVN-Revision: 33940	2012-10-26 15:24:10 +00:00
Florian Fainelli	8d69af7c9f	add preliminary support for 3.6 kernel SVN-Revision: 33936	2012-10-25 21:16:51 +00:00
Hauke Mehrtens	6a699a8ae8	brcm47xx: check for .ELF header in partition parser The image format for the wgt634u is different from the normal format. Without this patch the partition parser detects a 128kb bigger partition after every update. This closes #11420 Thank you b.sander for the patch. SVN-Revision: 33935	2012-10-25 19:49:20 +00:00
Hauke Mehrtens	d4ef5de604	kernel: add PCI id 14e4:4350 to ssb * 14e4:4350 is found on a Broadcom BCM43222. * remove some warnings when using a BCM43222. SVN-Revision: 33929	2012-10-25 15:50:47 +00:00
Felix Fietkau	1e2962e63c	kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again SVN-Revision: 33923	2012-10-25 15:11:45 +00:00
Felix Fietkau	5591188ac3	kernel: refresh config files using kconfig.pl SVN-Revision: 33922	2012-10-25 15:11:40 +00:00
Hauke Mehrtens	dca633f1c8	kernel: update bcma and ssb to master-2012-10-18 from wireless-testing * update the flash driver for bcm47xx to use the stubs already in bcma * do some misc enhancements to the flash drivers for bcm47xx SVN-Revision: 33920	2012-10-25 14:33:47 +00:00
Florian Fainelli	dea2da55df	fix Ethernet DMA for 636x and 6328 after r33916 SVN-Revision: 33918	2012-10-25 11:54:41 +00:00
Florian Fainelli	917670922b	add support for the Dynalink RTA770BW board This board id is used by the Siemens Gigaset SE515 router. SVN-Revision: 33917	2012-10-24 21:25:22 +00:00
Florian Fainelli	bdfcbb8bee	make BCM6345 Ethernet DMA changes runtime checks The semantics of the DMA engine are identical, we just have a couple of special case handling. SVN-Revision: 33916	2012-10-24 21:25:10 +00:00
Florian Fainelli	df6f9072ab	ARM: fix XZ decompressor stub build failure on strstr() SVN-Revision: 33915	2012-10-24 15:57:31 +00:00
Florian Fainelli	b5c27880ee	fixup generic 3.6 kernel config It was not meant to be committed as-is in r33911 SVN-Revision: 33914	2012-10-24 15:57:24 +00:00
Florian Fainelli	a6bfca90b0	fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set This issue got introduced while porting the patch over 3.6 in r33897 SVN-Revision: 33913	2012-10-24 13:23:20 +00:00
Florian Fainelli	7e856e5a97	make all 3.6 patches apply and build SVN-Revision: 33911	2012-10-24 13:05:22 +00:00
Florian Fainelli	4afb91a12f	swconfig: get rid of the NLA_PUT_* macros Upstream kernel 3.6 has removed this usage, use the plain functions directly as intended. SVN-Revision: 33906	2012-10-24 13:05:04 +00:00
Jo-Philipp Wich	f600ec5b3b	x86: allow both old and new grub signatures in sysupgrade SVN-Revision: 33898	2012-10-23 16:34:00 +00:00
Imre Kaloz	949b46d13d	linux 3.6 support (work in progress) SVN-Revision: 33897	2012-10-23 12:21:34 +00:00
Jonas Gorski	0d2cf5f9e3	kernel: move the bcma fallback sprom fix to generic bcm63xx needs the bcma fallback sprom fix, too. SVN-Revision: 33896	2012-10-23 10:57:49 +00:00
Jonas Gorski	0cc4bed41c	add support for Comtrend AR5381u. Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33895	2012-10-23 10:57:47 +00:00
Jonas Gorski	d73871fb18	add support for Comtrend AR5387un. Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33894	2012-10-23 10:57:44 +00:00
Jonas Gorski	e93725a743	add support for HomeStation ADB P.DG A4001N. Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33893	2012-10-23 10:57:39 +00:00
Felix Fietkau	95e642632a	x86: correct image magic for grub2 images Sysupgrade broke on x86 when grub2 superceded grub. This patch corrects tha magic_word to be expected in grub2 combined images. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 33890	2012-10-22 16:06:29 +00:00
Florian Fainelli	61686a1514	add back support for BCM6345 Ethernet DMA engine SVN-Revision: 33889	2012-10-22 12:57:22 +00:00
Florian Fainelli	eeed82c04e	fix clocks bits for BCM6345 SVN-Revision: 33888	2012-10-22 12:57:14 +00:00
Florian Fainelli	ca25e61c6c	refresh 3.3 patches SVN-Revision: 33887	2012-10-21 21:30:30 +00:00
Jonas Gorski	e6171dfb2c	Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886	2012-10-21 14:35:06 +00:00
Gabor Juhos	f1f388d527	ar71xx: rw2458n - fix flash parts See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33867	2012-10-19 18:32:49 +00:00
Gabor Juhos	b530d9d2b3	ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864	2012-10-19 17:42:22 +00:00
Gabor Juhos	6ca2970e4b	ramips: add profile and build image for the TEW-691GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852	2012-10-18 07:23:13 +00:00
Gabor Juhos	21180e29f7	ramips: add user-space support for TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851	2012-10-18 07:23:12 +00:00
Gabor Juhos	25d53c4c28	ramips: rt3883: add initial support for the TRENDnet TEW-691GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850	2012-10-18 07:23:11 +00:00
Gabor Juhos	462a53c367	ramips: add profile and build image for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849	2012-10-18 07:23:10 +00:00
Gabor Juhos	d3c368c324	ramips: add user-space support for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847	2012-10-18 07:23:07 +00:00
Gabor Juhos	7f8b7207c9	ramips: rt3883: add initial support for TRENDnet TEW-692GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846	2012-10-18 07:23:06 +00:00
Gabor Juhos	bf9ae9432b	ramips: add profile and build image for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845	2012-10-18 07:23:04 +00:00
Gabor Juhos	06edafd079	ramips: add user space support for the DIR-645 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844	2012-10-18 07:23:03 +00:00
Gabor Juhos	d1a253a2fd	ramips: rt3883: add inital support for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843	2012-10-18 07:23:02 +00:00
Gabor Juhos	e962c16a88	ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842	2012-10-18 07:23:00 +00:00
Gabor Juhos	0045449b1b	generic: add driver for the the RTL8367R{B,-VB} switches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33839	2012-10-18 07:22:56 +00:00
Felix Fietkau	96fa602499	ixp4xx: add sysupgrade support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/ixp4xx/base-files/lib/ixp4xx.sh \| 25 ++ target/linux/ixp4xx/base-files/lib/upgrade/platform.sh \| 156 +++++++++++++++++ target/linux/ixp4xx/image/Makefile \| 11 + 3 files changed, 192 insertions(+) SVN-Revision: 33828	2012-10-17 22:03:46 +00:00
Felix Fietkau	879b7a7a9b	cns3xxx: update FIQ header file and disable RWFO Update header file appropriately and disable read for ownership Note that the FIQ support implements a workaround that provides a performance boost over the traditional upstream workaround which ensures cache lines are exclusive on driver CPU using 'read for ownership'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/config-3.3 \| 2 +- target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch \| 9 ++++----- 2 files changed, 5 insertions(+), 6 deletions(-) SVN-Revision: 33827	2012-10-17 22:03:37 +00:00
John Crispin	6993e19532	drop GPIODEV platform code SVN-Revision: 33825	2012-10-17 21:53:37 +00:00
Gabor Juhos	7a72f01a72	ar71xx: merge machine support patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33820	2012-10-17 18:27:50 +00:00
Gabor Juhos	2e1bc1e15b	ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33819	2012-10-17 18:27:48 +00:00
Gabor Juhos	31387947c8	ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33818	2012-10-17 18:27:47 +00:00
Gabor Juhos	5ffc08e3dc	ar71xx: add a helper function for setting up ETH_CFG register on AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33817	2012-10-17 18:27:45 +00:00
Gabor Juhos	35a91a4fe8	ar71xx: OM2P-HS sysupgrade support Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33803	2012-10-17 08:26:05 +00:00
Gabor Juhos	c5a32cfc92	ar71xx: add support for the OpenMesh OM2P-HS board Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33800	2012-10-17 08:26:01 +00:00
Florian Fainelli	254d851d8a	nuport-mac: various fixes - properly check for the link up condition in the phylib adjust callback - do not assign skb->dev, eth_type_trans() already does it - handle skb allocation failures in the refill path SVN-Revision: 33780	2012-10-15 21:03:57 +00:00
Florian Fainelli	60ecd5fe04	merge the RDC R-321x target as a subtarget of x86 SVN-Revision: 33779	2012-10-15 18:54:34 +00:00
Gabor Juhos	f1283d8583	ar71xx: fix sysupgrade for jjPlus JWAP003 [juhosg: change commit message] Signed-off-by: Artur Wronowski <arteqw@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33769	2012-10-14 16:24:26 +00:00
Gabor Juhos	1944f7b916	ar71xx: ew-dorin: added ethernet switch configuration Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33768	2012-10-14 16:24:25 +00:00
Gabor Juhos	62ab2b0da6	ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC Commit r33248 introduced a regression by passing the board name plus 'board=' in the third argument. The board name string has to be put into the image as identifier of the image type. [juhosg: fix OpenMesh template instead of use of string substitution] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33767	2012-10-14 16:24:22 +00:00
Florian Fainelli	e4bebad4f7	add Actiontec PK5000 LEDs Also share them between the GT701 and the PK5000. Patch from Daniel Gimpelevich. SVN-Revision: 33756	2012-10-13 17:47:45 +00:00
Florian Fainelli	d78371f5c0	vlynq: rework probing and clocking setup Handle the different vlynq device versions, and make the vlynq code more in line with the original vlynq implementation. Patch from Daniel Gimpelevich. SVN-Revision: 33755	2012-10-13 17:47:36 +00:00
Florian Fainelli	0f04f7479c	remove the squashfs alignement define Patch from Daniel Gimpelevich. SVN-Revision: 33754	2012-10-13 17:47:30 +00:00
Florian Fainelli	ec4e61e558	handle LOADER_MAGIC2 in ar7part This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich. SVN-Revision: 33753	2012-10-13 17:47:25 +00:00
Florian Fainelli	e5a65db1b5	increase the flash resource size to its maximum value CFI detection will reduce the resource size to its real value. Patch from Daniel Gimpelevich. SVN-Revision: 33752	2012-10-13 17:47:20 +00:00
Florian Fainelli	7205421c5b	reinstate the fixed PHY fallback for devices with undetectable switches At least devices without a switch present on the MDIO bus still get a valid link and work as expected (such as the Linksys WAG54Gv2). SVN-Revision: 33751	2012-10-13 17:47:14 +00:00
Florian Fainelli	3794a6a9dd	enable mvswitch driver And fix the default network configuration to create the required VLANs. Patch from Daniel Gimpelevich. SVN-Revision: 33750	2012-10-13 17:47:09 +00:00
Florian Fainelli	99598d2473	use the second available LED to encore mode boot states Patch from Daniel Gimpelevich. SVN-Revision: 33749	2012-10-13 17:47:04 +00:00
Florian Fainelli	31c324f451	use wpad-mini instead of hostapd SVN-Revision: 33744	2012-10-13 17:46:32 +00:00
Imre Kaloz	c24df51736	add support for new Option modules (GTM66xxWFS/GTM67xxWFS) Add new device ID's for the hso driver as well as usb storage Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33743	2012-10-13 06:58:42 +00:00
Jo-Philipp Wich	4cfd3dc8ed	x86/kvm_guest: enable PCIE support SVN-Revision: 33741	2012-10-12 16:51:31 +00:00
Florian Fainelli	e7b2a4170c	copy initramfs kernel to bin directory SVN-Revision: 33726	2012-10-11 15:45:24 +00:00
John Crispin	ba6751058b	gpiodev/gpioctl RIP SVN-Revision: 33725	2012-10-11 11:58:09 +00:00
Imre Kaloz	88a740ff80	fix (really this time) laguna UART config Properly terminate the correct platform resource for laguna UARTs Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33721	2012-10-11 09:51:35 +00:00
Imre Kaloz	9b22ca8042	The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci). Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33720	2012-10-11 07:59:06 +00:00
Imre Kaloz	31c2f1a4d2	fix non terminated uart resources for laguna Resolves crashes when probing multiple serial devices Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33719	2012-10-11 07:47:27 +00:00
Florian Fainelli	bc3b111cfd	generate vmlinux.srec and vmlinux.bin from srec2bin Useful for loading the kernel into RAM using ADAM2/PSPBoot. SVN-Revision: 33718	2012-10-11 06:45:07 +00:00
Felix Fietkau	d0ec348ded	kernel: fq_codel: dont reinit flow state Keep fq_codel flow state around after queue empty. SVN-Revision: 33687	2012-10-10 11:54:31 +00:00
Felix Fietkau	f933719138	kernel: dont delay acks after ECN CE Bugfix from linux head - don't delay acks from ECN congestion experienced in some situations. SVN-Revision: 33686	2012-10-10 11:54:27 +00:00
Felix Fietkau	85871f283a	cns3xxx: Fix GPIO configuration for Gateworks Laguna boards The Laguna boards do not use all the same pins for SDHCI as the Cavium reference board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33684	2012-10-10 11:39:02 +00:00
Felix Fietkau	6bb7409e5a	cns3xxx: Fix laguna arm11mpcore watchdog The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33683	2012-10-10 11:38:58 +00:00
Felix Fietkau	f570c806ef	mtd: allow partial block unlock This allows sysupgrade for devices such as the Gateworks Avila/Cambria product families based on the ixp4xx using the redboot bootloader with combined FIS directory and RedBoot config partitions on larger FLASH devices with larger eraseblocks. This second iteration of this patch addresses previous issues: - whitespace breakage fixed - unlock in all scenarios - simplification and fix logic bug Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33681	2012-10-10 11:38:44 +00:00
Felix Fietkau	cae6f4ddb4	ixp4xx: enable OPTIMIZE_FOR_SIZE Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is critical for some small-footprint boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33679	2012-10-10 11:38:28 +00:00
Felix Fietkau	f14b8d43f2	ixp4xx: add missing reboot handlers (fixes #11577 ) SVN-Revision: 33672	2012-10-09 15:38:55 +00:00
Felix Fietkau	856fba88d9	x86: remove the reboot=bios command line parameter (#12193 ) SVN-Revision: 33671	2012-10-09 15:20:11 +00:00
Jonas Gorski	fbe0af3237	bcm63xx: remove bcm_tag usage in kernel Fixes #12292. SVN-Revision: 33670	2012-10-09 08:08:49 +00:00
Jonas Gorski	6a000ba37a	bcm63xx: fix 963281TAN image names it's a 6328, not a 6348. SVN-Revision: 33665	2012-10-08 13:08:40 +00:00
Jonas Gorski	997ace7e5e	firmware-utils: move bcm_tag.h here Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. SVN-Revision: 33655	2012-10-08 09:59:50 +00:00
Jonas Gorski	f16ea6be3f	bcm63xx: fix entering failsafe through button gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. SVN-Revision: 33653	2012-10-08 09:59:44 +00:00
Felix Fietkau	e5bb1a1bc7	cns3xxx: add sysupgrade support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/base-files/lib/cns3xxx.sh \| 22 ++ target/linux/cns3xxx/base-files/lib/upgrade/platform.sh \| 122 ++++++++++++++++ target/linux/cns3xxx/image/Makefile \| 19 +- 3 files changed, 159 insertions(+), 4 deletions(-) SVN-Revision: 33650	2012-10-07 23:24:02 +00:00
Felix Fietkau	68449e2e01	cns3xxx: add GW2383 board support Add GPIO/LED support for Gateworks GW2383 Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/300-laguna_support.patch \| 18 +++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) SVN-Revision: 33649	2012-10-07 23:23:58 +00:00
Felix Fietkau	6b778f57aa	cns3xxx: fix gpio access and add gpio IRQ support Signed-off-by: Tim Harvey <tharvey@gateworks.com> target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch \| 536 ++++++++++++++++++++ 1 file changed, 536 insertions(+) SVN-Revision: 33648	2012-10-07 23:23:52 +00:00
Felix Fietkau	bca070dfbe	ixp4xx: update Gateworks Avila board support Several new features for newer boards: - add additional UARTs present on some boards - add additional LEDs present on some boards - add HSS audio device codec present on some boards - add support for GSC present on some boards - add per model setup support for newer boards - set FLASH window per-model for boards with larger FLASH Some fixes: - add IRQ mapping for additional PCI devices (USB Host) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33647	2012-10-07 23:23:47 +00:00
Felix Fietkau	22b86fec7c	ixp4xx: patch cleanup roll all avila patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33646	2012-10-07 23:23:43 +00:00
Felix Fietkau	d660734a1b	ixp4xx: Add HSS audio driver for Avila product family Add ixp4xx HSS audio driver for Avila Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33645	2012-10-07 23:23:39 +00:00
Felix Fietkau	ce692ed043	ixp4xx: update Gateworks Cambria board support Several new features for newer boards: - add irq mapping for additional devices - add platform data for i2c bus to SFP modules - add additional UARTs present on some boards - increased R/W delay for expansion bus UARTs - add additional LEDs present on some boards - add GPIO exports and configuration - add ENET switch config present on some boards - add support for GSC present on some boards - added per model setup support for newer boards Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33644	2012-10-07 23:23:34 +00:00
Felix Fietkau	21d182b9e5	ixp4xx: patch cleanup roll all cambria patches into a single patch (no code changes) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33643	2012-10-07 23:23:29 +00:00
Felix Fietkau	d3567cc886	ixp4xx: split out new UART I/O to its own patch This is being done for general cleanup Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33642	2012-10-07 23:23:25 +00:00
Felix Fietkau	1abbe676d1	x86: rename the iso file to openwrt-x86-generic.iso SVN-Revision: 33641	2012-10-07 23:05:39 +00:00
Felix Fietkau	0dd7644ec7	x86: remove grub-legacy SVN-Revision: 33640	2012-10-07 23:01:56 +00:00
Felix Fietkau	a1bcd25082	x86: add grub2 iso support SVN-Revision: 33639	2012-10-07 23:01:52 +00:00
Felix Fietkau	53cc34e517	x86/generic: enable cdrom + iso9660 support SVN-Revision: 33638	2012-10-07 23:01:47 +00:00
Gabor Juhos	befb648642	ar71xx: build image for the TL-WR841N/ND v8 SVN-Revision: 33623	2012-10-04 20:16:06 +00:00
Gabor Juhos	02a85dfd85	ar71xx: user-space support for TL-WR841N/ND v8 SVN-Revision: 33622	2012-10-04 20:16:05 +00:00
Gabor Juhos	196c6c5b45	ar71xx: add support for the TL-WR841N/ND v8 board SVN-Revision: 33621	2012-10-04 20:16:03 +00:00
Hauke Mehrtens	07234dc8bd	bcma: do not initialize deactivated PCIe cores Before it was tried to initialize the deactivated PCIe core in client mode, but this causes the SoC to hang. Just do not initialize it at all and ignore the core it is not working and nothing is connected to it when the specific bit is set in the boardflags. SVN-Revision: 33620	2012-10-04 15:45:54 +00:00
Hauke Mehrtens	2819890839	use memcmp in mem size detection as suggested by blogic SVN-Revision: 33619	2012-10-04 15:42:12 +00:00
Florian Fainelli	5e0df9582b	fix typo in 05_set_ether_mac_rdc preinit script (#11166 ) SVN-Revision: 33618	2012-10-04 12:36:50 +00:00
Gabor Juhos	d832cd11f8	ramips: add image for ALL0256N-8M The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614	2012-10-04 06:34:09 +00:00
Florian Fainelli	47c5c4df1c	add Default and Gumstix PXA profiles Gumstix builds a fake flash image for usage in qemu SVN-Revision: 33609	2012-10-03 16:15:05 +00:00
Florian Fainelli	48daf407a6	advertise jffs2 feature SVN-Revision: 33607	2012-10-03 16:12:57 +00:00
Florian Fainelli	bb7ac8ae7d	remove broken flag SVN-Revision: 33606	2012-10-03 16:12:39 +00:00
Florian Fainelli	8f44ba1ae2	fix build with latest gpiolib changes SVN-Revision: 33605	2012-10-03 16:12:03 +00:00
Florian Fainelli	d504b6251c	more convertions to {read,write}_relaxed I/O accessors SVN-Revision: 33604	2012-10-03 16:10:47 +00:00
Felix Fietkau	a2e1dce829	cns3xxx: add missing kernel config symbol SVN-Revision: 33603	2012-09-30 15:31:34 +00:00
Hauke Mehrtens	9f083117d1	refresh patches SVN-Revision: 33602	2012-09-30 11:45:53 +00:00
Hauke Mehrtens	642fe7f10a	bcma: use fallback sprom if sprom on card was not valid Sometimes the PCIe card indicates that it has a sprom somewhere and we are able to read the memory region, but it is empty and not valid. In these cases we should try to use the fallback sprom as a last chance. SVN-Revision: 33601	2012-09-30 11:45:31 +00:00
Hauke Mehrtens	42952fd94f	bcma: initialize sprom earlier The chip common and the PCIe code are accessing the sprom struct which is not filled when these cores are initialized. Fix this by adding an early initialize and fill the sprom struct before accessing it in other code. SVN-Revision: 33600	2012-09-30 11:44:44 +00:00
Hauke Mehrtens	2d40590a23	run make kernel_oldconfig SVN-Revision: 33599	2012-09-30 11:44:04 +00:00
Hauke Mehrtens	e5eefed084	ignore the last page on bcma based SoCs SVN-Revision: 33598	2012-09-30 11:43:40 +00:00
Hauke Mehrtens	c9feffc332	Fix reading sprom from nvram without a prefix The bcma based SoCs with a ieee80211 core on the SoC and an other connected via PCIe or USB store the sprom for the SoC with a sb/1/ prefix. The SoC with just one wifi core do not use prefixes. The BCM4706 do not use a prefix for the SoC part at all, because the prefix is the path to the ieee80211 core and there is non on the BCM4706. SVN-Revision: 33597	2012-09-30 11:43:13 +00:00
Hauke Mehrtens	4d5c75a54e	improve the check for the memory size This will hopefully fix bug #9360 and #9097 in trunk. SVN-Revision: 33596	2012-09-30 11:42:16 +00:00
John Crispin	f3cab53f27	dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency SVN-Revision: 33593	2012-09-28 21:54:31 +00:00
John Crispin	0afc7b9b6d	add support for adm6996 phy SVN-Revision: 33592	2012-09-28 21:38:02 +00:00
John Crispin	9dc218f88f	tapi was not registeredproperly for most arcadyan boards SVN-Revision: 33591	2012-09-28 20:57:06 +00:00
Imre Kaloz	c53936bb4b	Add FIQ support for cns3xxx Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33581	2012-09-28 17:35:35 +00:00
Imre Kaloz	2f2115c436	Update board support for Gateworks Laguna Product family Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33580	2012-09-28 17:34:18 +00:00
Imre Kaloz	70729bb4a5	USB iso mode fixes Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33579	2012-09-28 17:31:22 +00:00
Gabor Juhos	170cd7a19a	ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac SVN-Revision: 33575	2012-09-27 20:05:42 +00:00
Gabor Juhos	a0df3fa315	generic: enable CONFIG_USB_EHCI_TT_NEWSCHED This feature was experimental in old kernels but that flag has been removed in 2.6.36. Additionally, the option is enabled by default since then. See: http://www.spinics.net/lists/linux-usb/msg31993.html SVN-Revision: 33574	2012-09-27 20:05:39 +00:00
Gabor Juhos	e3bcbeb427	ramips: add memory detection code for RT5350 SVN-Revision: 33571	2012-09-27 10:18:15 +00:00
Gabor Juhos	80d2da9f0f	ramips: allow to use custom code for memory size detection SVN-Revision: 33570	2012-09-27 10:18:14 +00:00
Florian Fainelli	4ea68a13e3	include sys/resource.h in arch/um/os-Linux/start_up.c (#12155 ) Required for recent (e)glibc systems SVN-Revision: 33569	2012-09-27 09:21:01 +00:00
Imre Kaloz	68f8db6731	fix ncores for single-core systems. For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS shows which ones are active. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33566	2012-09-27 08:07:17 +00:00
Imre Kaloz	9ace6ace8f	add i2c retries Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33565	2012-09-27 08:06:13 +00:00
Imre Kaloz	7dd6b04c28	fix pcie abort handling Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33564	2012-09-27 08:05:19 +00:00
Florian Fainelli	caf900f0e4	remove kmod-spi-bitbang This is no longer a dependency of kmod-spi-bcm63xx SVN-Revision: 33562	2012-09-26 20:11:37 +00:00
Gabor Juhos	579e9cded8	generic: add upstream commit id to codel patches and refresh those SVN-Revision: 33560	2012-09-26 14:17:17 +00:00
Florian Fainelli	eb97933e2a	backport the upstream entropy changes (#11951 ) SVN-Revision: 33559	2012-09-26 12:54:01 +00:00
Florian Fainelli	4a67ccb163	get rid of the IRQF_SAMPLE_RANDOM flag SVN-Revision: 33558	2012-09-26 12:53:58 +00:00
Florian Fainelli	c27c0d1ff0	add wmbus-repeater to the dLAN USB Extender profile SVN-Revision: 33556	2012-09-25 20:56:50 +00:00
Florian Fainelli	c7cf4def64	enable multicast and advanced ip routers configs SVN-Revision: 33555	2012-09-25 20:53:34 +00:00
Florian Fainelli	d95f612340	add kmod-usb-serial-ftdi to the dLAN USB Extender profile SVN-Revision: 33554	2012-09-25 20:50:20 +00:00
John Crispin	d8c04821c3	make uci-defaults switch detection work on rt5350 SVN-Revision: 33549	2012-09-25 14:47:18 +00:00
John Crispin	34d57ebd8b	add ethernet support for rt5350 SVN-Revision: 33548	2012-09-25 14:47:08 +00:00
John Crispin	af0cd76937	make ramips ethernet use a register mapping table SVN-Revision: 33547	2012-09-25 14:46:58 +00:00
Hauke Mehrtens	0818180715	activate failsafe on all ports of the switch and not just port 0. Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. SVN-Revision: 33544	2012-09-25 14:04:59 +00:00
Gabor Juhos	ffc0ea6c5d	ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards With these images, it is possible to use the 'unused' partition of the flash. The 'fat' images can be installed with the sysupgrade command. When a 'fat' image is installed from a regular one, the platform specific sysupgrade script copies the calibration data to the end of the flash. Likewise, when a regular image is installed from the 'fat' version the sysupgrade script copies the calibration data back to the original location. SVN-Revision: 33540	2012-09-25 12:57:41 +00:00
Gabor Juhos	e7b1949d87	ar71xx: automatically find WLAN calibration data on TEW-673GRU SVN-Revision: 33539	2012-09-25 12:57:40 +00:00
Gabor Juhos	8ed8e51e74	ar71xx: automatically find WLAN calibration data on DIR-825-B1 SVN-Revision: 33538	2012-09-25 12:57:38 +00:00
Gabor Juhos	e2504a977a	ar71xx: add missing backslash to uci-defaults/leds (closes #12240 ) SVN-Revision: 33537	2012-09-25 12:49:43 +00:00
John Crispin	394a560a9a	unbreak port mapping detection SVN-Revision: 33536	2012-09-25 09:51:48 +00:00
Gabor Juhos	e70ad61e44	ar71xx: use different machtype and setup for the TL-MR3040 Should fix #12211. Compile tested only. SVN-Revision: 33535	2012-09-24 18:45:56 +00:00
Felix Fietkau	493b7c7f3c	x86: avoid using grub prepare when using grub2 SVN-Revision: 33525	2012-09-23 09:59:56 +00:00
Felix Fietkau	999252dccc	x86-generic: enable a few more common kernel options/drivers SVN-Revision: 33516	2012-09-22 23:29:20 +00:00
Felix Fietkau	b968dcd52e	kernel: increase log buffer size SVN-Revision: 33515	2012-09-22 23:10:42 +00:00
Felix Fietkau	0260262f0b	x86: enable usb storage support for the generic subtarget to support booting from usb devices SVN-Revision: 33514	2012-09-22 21:15:59 +00:00
Felix Fietkau	52e8ee0666	x86: add support for building grub2 images SVN-Revision: 33513	2012-09-22 20:10:42 +00:00
Felix Fietkau	ce4244c8af	x86: split generic image building into a separate script SVN-Revision: 33511	2012-09-22 20:10:35 +00:00
Felix Fietkau	6c02dd2b04	x86: rename gen_image_x86.sh to gen_image_grub.sh SVN-Revision: 33510	2012-09-22 20:10:31 +00:00
Felix Fietkau	d6ca46cd25	cns3xxx: fix ethernet driver tx completion and queue stop/start SVN-Revision: 33504	2012-09-22 00:34:53 +00:00
Felix Fietkau	fb71465a4e	cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames SVN-Revision: 33503	2012-09-22 00:34:49 +00:00
Imre Kaloz	ed3597d927	move gpio stuff into the right file SVN-Revision: 33502	2012-09-21 05:40:04 +00:00
Imre Kaloz	a74cf6f9a8	refresh patches SVN-Revision: 33501	2012-09-21 05:38:16 +00:00
Felix Fietkau	15159604d9	cns3xxx: add a small optimization for rx offload SVN-Revision: 33500	2012-09-21 00:13:12 +00:00
Felix Fietkau	a1c016fe16	cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames SVN-Revision: 33499	2012-09-21 00:13:08 +00:00
Felix Fietkau	029aaf4514	cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining SVN-Revision: 33498	2012-09-20 20:27:18 +00:00
Felix Fietkau	c4a419b445	kernel: enable perf events when enabling profiling, fixes oprofile on arm SVN-Revision: 33497	2012-09-20 20:27:14 +00:00
Hauke Mehrtens	fd7b2b5141	deactivate mips wait instruction for MIPS 74K on Broadcom SoCs When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. SVN-Revision: 33496	2012-09-20 14:51:57 +00:00
Felix Fietkau	1067ccf9f7	cns3xxx: remove the broken flag SVN-Revision: 33493	2012-09-19 23:50:25 +00:00
Felix Fietkau	2db9e9f624	cns3xxx: fix kernel config SVN-Revision: 33492	2012-09-19 23:50:22 +00:00
Felix Fietkau	34d30654ae	cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists SVN-Revision: 33491	2012-09-19 23:50:18 +00:00
Felix Fietkau	eff9405752	cns3xxx: fix ethernet tx checksum offload SVN-Revision: 33490	2012-09-19 23:50:15 +00:00
Felix Fietkau	dd1fb8289f	cns3xxx: merge ethernet driver changes from gateworks SVN-Revision: 33489	2012-09-19 23:50:12 +00:00
Felix Fietkau	190b4344a3	cns3xxx: build images for the old boot loader and the new one (default to the new one) SVN-Revision: 33488	2012-09-19 23:50:09 +00:00
Felix Fietkau	59b1d018b1	cns3xxx: fix the ethernet driver makefile SVN-Revision: 33487	2012-09-19 23:50:06 +00:00
Felix Fietkau	c9139c150c	cns3xxx: reorganize patches, fix pcie io space init order SVN-Revision: 33486	2012-09-19 23:50:02 +00:00
Felix Fietkau	7cd4968d0e	cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls SVN-Revision: 33485	2012-09-19 23:49:58 +00:00
Felix Fietkau	2f39fa872a	cns3xxx: add missing callbacks for the laguna machine support SVN-Revision: 33484	2012-09-19 23:49:50 +00:00
Florian Fainelli	57bd95734d	brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package The package block-hotplug doesn't exist, refer to block-mount instead. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33474	2012-09-19 15:13:33 +00:00
Florian Fainelli	136eb6815c	omap24xx/profiles/n810: remove reference to non-existing package The package block-hotplug doesn't exist, removing reference to it. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33473	2012-09-19 15:13:30 +00:00
Hauke Mehrtens	db18fa388d	update fix-boot patch. Do not change the code any more but use the kconfig options SVN-Revision: 33463	2012-09-19 10:18:36 +00:00
Hauke Mehrtens	eeb3ad1860	update gpio patches SVN-Revision: 33462	2012-09-19 10:17:51 +00:00
Gabor Juhos	79ffd1032a	ar71xx: fix a typo in TEW-637GRU image names SVN-Revision: 33460	2012-09-18 14:32:25 +00:00
Gabor Juhos	9a11f882d7	ar71xx: revert DIR-825-B1 wholeflash image support. It should be implemmented in a cleaner way. This reverts the following commits: [ar71xx] dir-825-b1: Fix wholeflash images [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash" SVN-Revision: 33459	2012-09-18 14:30:57 +00:00
Florian Fainelli	ee16fea079	disable VFPv4 probing This will make the kernel crash on systems using qemu < 1.1.0. Until fixed disable VPFv4 capability probing. SVN-Revision: 33458	2012-09-18 10:00:56 +00:00
Florian Fainelli	4d2fb44f0c	partially revert r33403 The target CFLAGS were also accidentally changed SVN-Revision: 33457	2012-09-18 10:00:46 +00:00
Gabor Juhos	a7c5c4390a	ar71xx: register the NAND flash controller device on DB120 SVN-Revision: 33455	2012-09-17 20:30:57 +00:00
Gabor Juhos	7c85646176	ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read SVN-Revision: 33454	2012-09-17 20:30:55 +00:00
Gabor Juhos	3bdf0bc36f	ar71xx: ar934x_nfc: increase DMA retry count SVN-Revision: 33453	2012-09-17 20:30:54 +00:00
Gabor Juhos	b7cb43f6a6	ar71xx: ar934x_nfc: optimize READOOB operation on large page devices SVN-Revision: 33452	2012-09-17 20:30:53 +00:00
Gabor Juhos	96dde2e591	ar71xx: ar934x_nfc: fix RNDOUT operation SVN-Revision: 33451	2012-09-17 20:30:51 +00:00
Gabor Juhos	338b698fb6	ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices SVN-Revision: 33450	2012-09-17 20:30:50 +00:00
Daniel Dickinson	0f254b4b67	dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). SVN-Revision: 33447	2012-09-17 14:17:12 +00:00
Felix Fietkau	e8893fdf7a	ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x SVN-Revision: 33446	2012-09-17 11:17:29 +00:00
Felix Fietkau	ed14ffc7da	ar71xx: fix WP543 image builds SVN-Revision: 33413	2012-09-15 10:21:21 +00:00
John Crispin	223db72385	D-Link DAP-1350; Avoid bricking esw config This is a patch to connect eth0.1 (lan) to the only ethernet connector available. D-Link DAP-1350 goes bricked with AA 12.09-beta. This is because the current esw configuration for the board connects eth0.2 (wan) to the ONE and ONLY ethernet connector available, preventing initial access to the board through 192.168.1.1 on eth0.1 after flashing, effectively bricking the board. There are things that should be done to make this board really useful, but for AA 12.09, this one liner is indispensable. Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33411	2012-09-15 09:28:28 +00:00
John Crispin	bf355f8ee9	ramips/rt3883: fix a typo in the ASUS profile Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33410	2012-09-15 09:20:50 +00:00
Florian Fainelli	a2b29c591e	partially revert r33403 SVN-Revision: 33409	2012-09-14 15:44:25 +00:00
Florian Fainelli	0d464a8ac3	set DEVICE_TYPE to developerboard SVN-Revision: 33408	2012-09-14 15:37:51 +00:00
Florian Fainelli	42846febb9	fix sparc32 assembler failures with newer toolchains SVN-Revision: 33407	2012-09-14 15:37:40 +00:00
Florian Fainelli	39ddc9105c	refresh patches so they apply cleanly SVN-Revision: 33406	2012-09-14 15:37:12 +00:00
Florian Fainelli	4128b8e189	set DEVICE_TYPE to developperboard SVN-Revision: 33403	2012-09-14 15:36:33 +00:00
Florian Fainelli	2254fc2673	set DEVICE_TYPE to developperboard SVN-Revision: 33402	2012-09-14 15:36:30 +00:00
Gabor Juhos	61dc6e65c0	ar71xx: merge machine support patches SVN-Revision: 33389	2012-09-13 07:26:28 +00:00
Gabor Juhos	5804b9d1b7	ar71xx: register the NAND controller device on the RB2011 SVN-Revision: 33388	2012-09-13 07:26:26 +00:00
Gabor Juhos	4fd67c3cd4	ar71xx: add device registration code for the AR934x NAND flash controller SVN-Revision: 33387	2012-09-13 07:26:25 +00:00
Gabor Juhos	10cd35c0e7	ar71xx: package the AR934x NAND driver module SVN-Revision: 33386	2012-09-13 07:26:23 +00:00
Gabor Juhos	1e5fdbeae5	ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x SVN-Revision: 33385	2012-09-13 07:26:22 +00:00
Gabor Juhos	acaf597f4a	generic: add MTD_NAND_AR934X symbol SVN-Revision: 33384	2012-09-13 07:26:21 +00:00
Gabor Juhos	43147ffec5	generic: move GENERIC_PWM symbol into the generic config SVN-Revision: 33383	2012-09-13 06:38:31 +00:00
Gabor Juhos	40a5f5c16e	ar71xx: define NAND controller base address and register size for AR934X/QCA955x SVN-Revision: 33382	2012-09-12 19:06:38 +00:00
Gabor Juhos	0a42b02126	ramips/rt305x: add initial support for Rt5350 SoC Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33381	2012-09-12 19:03:12 +00:00
Hauke Mehrtens	95c141aaac	add gpio sysfs entries This fixes #10256 SVN-Revision: 33369	2012-09-11 15:04:20 +00:00
Gabor Juhos	4ee5b528de	ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x SVN-Revision: 33362	2012-09-10 14:38:01 +00:00
Gabor Juhos	2e0e38ad69	ar71xx: fix QCA955X_EHCI_SIZE SVN-Revision: 33360	2012-09-10 14:32:54 +00:00
Florian Fainelli	a36bdb2417	fix ixp4xx_hss build failure (#12162 ) SVN-Revision: 33356	2012-09-10 08:53:21 +00:00
Jo-Philipp Wich	caa66bd150	fix description of nand/Ath5k profile (#12149 ) SVN-Revision: 33352	2012-09-09 21:40:26 +00:00
Gabor Juhos	aa2f4d4c8d	ar71xx: add initial support for RB2011UAS-2HnD SVN-Revision: 33349	2012-09-09 14:05:32 +00:00
Gabor Juhos	3686e18727	ar71xx: use routerboot_find_tag to find wlan data offset on RB751 SVN-Revision: 33348	2012-09-09 14:05:30 +00:00
Gabor Juhos	ccabe4a1b4	ar71xx: add RouterBoot related helper routines SVN-Revision: 33347	2012-09-09 14:05:28 +00:00
Gabor Juhos	2323120d5e	generic add WLAN calibration data ID to routerboot.h SVN-Revision: 33346	2012-09-09 14:05:26 +00:00
Gabor Juhos	44bf7c7cc1	ar71xx: define MTD partitions for RB2011 SVN-Revision: 33345	2012-09-09 14:05:24 +00:00
Gabor Juhos	6ae5ec16e0	ar71xx: add preliminary support for Mikrotik RB2011L This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 33344	2012-09-09 14:05:22 +00:00
Gabor Juhos	94bac7366c	ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x SVN-Revision: 33343	2012-09-09 14:05:20 +00:00
Gabor Juhos	7592057774	ar71xx: add dynamic MDIO clock calculation SVN-Revision: 33342	2012-09-09 14:05:17 +00:00
Gabor Juhos	f3ecbea052	adm5120: move common routerboot definitions into a separate header file Those will be used on the ar71xx platform as well. SVN-Revision: 33341	2012-09-09 11:55:42 +00:00
Jonas Gorski	7708138183	bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi Fixes booting the device with button hotplug enabled (#10785). SVN-Revision: 33340	2012-09-09 11:54:56 +00:00
Gabor Juhos	88a5478781	ar71xx: use the RLE library for RB751 SVN-Revision: 33338	2012-09-08 17:51:56 +00:00
Gabor Juhos	73df240bb3	ar71xx: add library code for RLE decoding It will be used for the MikroTik boards. SVN-Revision: 33337	2012-09-08 17:51:54 +00:00
Gabor Juhos	f4be8a76de	ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x SVN-Revision: 33335	2012-09-08 13:39:09 +00:00
Gabor Juhos	70d00ac64e	ar71xx: refresh kernel patches SVN-Revision: 33334	2012-09-08 13:39:04 +00:00
Florian Fainelli	6771d63284	use the recommended ARM I/O accessors use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants. SVN-Revision: 33330	2012-09-08 09:51:05 +00:00
Daniel Dickinson	c3b7139ab2	dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. SVN-Revision: 33326	2012-09-06 18:15:26 +00:00
Luka Perkov	4c76b3635b	lantiq: fix sx76x default uci network configuration SVN-Revision: 33324	2012-09-06 00:09:46 +00:00
Florian Fainelli	3730e6c794	add some ohci workarounds to make ohci work SVN-Revision: 33323	2012-09-05 20:19:29 +00:00
Gabor Juhos	d8b2fef763	ramips: Add missing andmask to ramips_esw register read for recv_good value. Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33322	2012-09-05 20:08:43 +00:00
Gabor Juhos	04c6143ca9	ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33321	2012-09-05 20:08:42 +00:00
John Crispin	f186bff0ef	add missing kvm_guest kernel options SVN-Revision: 33319	2012-09-05 19:38:42 +00:00
Gabor Juhos	069f544d2b	ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x SVN-Revision: 33318	2012-09-05 19:26:50 +00:00
Gabor Juhos	81bb246a8d	ar71xx: add rssileds to package set in profile for devices which got them. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33317	2012-09-05 19:22:51 +00:00
Gabor Juhos	6c7b776ae0	ramips: add rssileds to package set in profile for devices which got them. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33316	2012-09-05 19:22:48 +00:00
Florian Fainelli	94a45be66b	enable CFI command set 0002 FORCE_WORD_WRITE SVN-Revision: 33315	2012-09-03 20:25:51 +00:00
Florian Fainelli	19cbe80501	pad squashfs image SVN-Revision: 33314	2012-09-03 20:25:46 +00:00
Florian Fainelli	1964753c22	add Generic and dLAN USB Extender profiles SVN-Revision: 33313	2012-09-03 20:25:40 +00:00
Florian Fainelli	e88e20d975	nuport-mac: disable MAC RX and TX during interface close Fixes sporadic crashes while reconfiguring the network interface. SVN-Revision: 33312	2012-09-03 10:26:01 +00:00
Gabor Juhos	11c3392b7f	Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" That was based on assumptions. SVN-Revision: 33310	2012-08-29 10:37:55 +00:00
Gabor Juhos	eb9a97a360	ar71xx: all0315n: fix ethernet according to vendor info Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33309	2012-08-29 10:37:54 +00:00
Gabor Juhos	02cb5f9dcd	ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds SVN-Revision: 33308	2012-08-29 10:37:53 +00:00
Gabor Juhos	b0da5b73b8	ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 SVN-Revision: 33307	2012-08-29 10:37:51 +00:00
Gabor Juhos	54d8a55eed	ramips: make built-in switch transparent for ALL0256N and ALL5002 This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33305	2012-08-29 10:37:47 +00:00
Gabor Juhos	bc4763a399	ramips: Power down phy on disabled switch ports Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33304	2012-08-29 10:37:45 +00:00
Gabor Juhos	1617f226a9	ramips: Add support for 8devices Carambola dev board. Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303	2012-08-29 10:37:43 +00:00
Gabor Juhos	bb0785880a	ramips: Rename POC registers Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33302	2012-08-29 10:37:41 +00:00
Gabor Juhos	f1b9d77912	ramips: Minor ramips_esw.c cleanup Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33301	2012-08-29 10:37:40 +00:00
Gabor Juhos	1f3400d3b4	ramips: Add switch setup to uci network defaults Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33300	2012-08-29 10:37:38 +00:00
Gabor Juhos	3b17f1deb8	ramips: Add swconfig support to ramips_esw.c Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299	2012-08-29 10:37:36 +00:00
Gabor Juhos	358c7e47f2	ramips: ramips_esw.c indentation cleanup Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33298	2012-08-29 10:37:35 +00:00
Gabor Juhos	0c5688cc38	ar71xx: image: fix Profile name for TL-WA701 (closes #12094 ) SVN-Revision: 33295	2012-08-29 10:37:30 +00:00
Gabor Juhos	5fdbb33db4	ar71xx: Buffalo WZR-HP-AG300H LED support An improved LED support for Buffalo WZR-HP-AG300H. There will be two new packages to go with this patch (ar922x-led-fix-hotplug and ar922x-led-fix-init). These packages essentially perform the same task of disabling "JTAG over GPIO pins" function which is currently required for LEDs on AR922x emac GPIO to work, and are both considered a temporary fix that circumvent this problem. [juhosg: add the hotplug script from the proposed ar922x-led-fix-hotplug package to ar71xx/base-files] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33294	2012-08-29 10:11:55 +00:00
Gabor Juhos	4405faae26	gemini: fix bus ids for PHY devices (closes: #12082 ) Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33288	2012-08-27 18:09:57 +00:00
Gabor Juhos	f2030c3113	ar71xx: add profile for Allnet devices Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33287	2012-08-27 14:55:38 +00:00
Gabor Juhos	d65c06c15c	ar71xx: generate image for ALL0315N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33286	2012-08-27 14:55:37 +00:00
Gabor Juhos	4079f3163f	ar71xx: sysupgrade for the ALL0315N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33285	2012-08-27 14:55:36 +00:00
Gabor Juhos	abffa4ecfb	ar71xx: rename all0258n.sh to allnet.sh Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33284	2012-08-27 14:55:35 +00:00
Gabor Juhos	1d96b0275c	ar71xx: detect ALL0315N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33282	2012-08-27 14:55:32 +00:00
Gabor Juhos	eebdd633e4	ar71xx: add support for the Allnet ALL0315N board Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33281	2012-08-27 14:55:31 +00:00
Gabor Juhos	cca873e8e0	ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33280	2012-08-27 14:55:26 +00:00
Gabor Juhos	fccf1f5105	generic: add support for the EON EN25Q64 SPI flash chip It is used in some TL-WDR4310 devices. Closes #12077. SVN-Revision: 33275	2012-08-26 09:27:56 +00:00
Gabor Juhos	5a9c7fda3e	ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a regression with board= kernel command line parameter incorrectly initialised. The faulty builds propogated to the snapshots download area. This makes the device unbootable and TP-Link users have to attach the serial to recover. Here is the q&d way i used to identify MIPS boards that didn't have a corresponding entry in the image/Makefile: for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \ \| sed -n '/MIPS_MACHINE/ { s/^[^"]"$[^"]$".*$/\1/; p; }'`; do grep -q ,$i, Makefile \|\| echo $i; done > missing-boards.new Reported-by: Casper on IRC Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33274	2012-08-26 08:15:11 +00:00
Gabor Juhos	f3d5edffdc	ar71xx: image: fix TL-WR1043ND board id (#12079 ) SVN-Revision: 33272	2012-08-26 06:30:37 +00:00
John Crispin	de3c3d7181	Enable eSATA sheevaplug OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition is compiled in. Signed-off-by: Unai Uribarri <unaiur@gmail.com> SVN-Revision: 33266	2012-08-24 06:15:06 +00:00
Gabor Juhos	773b33d7d2	ar71xx: image: group and sort {Single,Multi}Profiles SVN-Revision: 33264	2012-08-23 13:17:47 +00:00
Gabor Juhos	a5e0eb0d95	ar71xx: image: group and sort mtdlayout definitions SVN-Revision: 33263	2012-08-23 13:14:35 +00:00
Gabor Juhos	f0ad972aba	ar71xx: image: use the MultiProfile helper for the Madwifi profile SVN-Revision: 33262	2012-08-23 13:11:25 +00:00
Gabor Juhos	333f030b79	ar71xx: image: automatically build a list of SingleProfiles Use that for Default/Minimal profiles. SVN-Revision: 33261	2012-08-23 13:08:15 +00:00
Gabor Juhos	5dce77837f	ar71xx: image: use the new helpers for the ZyXEL images SVN-Revision: 33260	2012-08-23 13:05:05 +00:00
Gabor Juhos	be4be2d82a	ar71xx: image: use the new helpers for the Zcomax images SVN-Revision: 33259	2012-08-23 13:01:55 +00:00
Gabor Juhos	74bdb68ea4	ar71xx: image: use the new helpers for the WRT400 images SVN-Revision: 33258	2012-08-23 12:58:45 +00:00
Gabor Juhos	8cf9a7b1c7	ar71xx: image: use the new helpers for the WZRHPG30XNH images SVN-Revision: 33257	2012-08-23 12:55:35 +00:00
Gabor Juhos	c965d8ead8	ar71xx: image: use the new helpers for the WHRHPG300N images SVN-Revision: 33256	2012-08-23 12:52:25 +00:00
Gabor Juhos	71af43a7c7	ar71xx: image: use the new helpers for the UBNTXM images SVN-Revision: 33255	2012-08-23 12:49:15 +00:00
Gabor Juhos	097e9938b4	ar71xx: image: use the new helpers for the UBNT images SVN-Revision: 33254	2012-08-23 12:46:06 +00:00
Gabor Juhos	216e9b7a92	ar71xx: image: use the new helpers for the TPLINKOLD images SVN-Revision: 33253	2012-08-23 12:42:56 +00:00
Gabor Juhos	48d6081fa5	ar71xx: image: use the new helpers for the TPLINK-LZMA images SVN-Revision: 33252	2012-08-23 12:39:46 +00:00
Gabor Juhos	8546e00157	ar71xx: image: use the new helpers for the TPLINK images SVN-Revision: 33251	2012-08-23 12:36:35 +00:00
Gabor Juhos	27feea1070	ar71xx: image: use the new helpers for the Planex images SVN-Revision: 33250	2012-08-23 12:33:25 +00:00
Gabor Juhos	4dbabe5c21	ar71xx: image: use the new helpers for the PB4X images SVN-Revision: 33249	2012-08-23 12:30:15 +00:00
Gabor Juhos	bbaa0b9200	ar71xx: image: use the new helpers for the OpenMesh images SVN-Revision: 33248	2012-08-23 12:27:06 +00:00
Gabor Juhos	4edc55f475	ar71xx: image: use the new helpers for the Netgear images SVN-Revision: 33247	2012-08-23 12:23:56 +00:00
Gabor Juhos	d9f933b8b8	ar71xx: image: use the new helpers for the MyLoader images SVN-Revision: 33246	2012-08-23 12:20:46 +00:00
Gabor Juhos	a409d0cf46	ar71xx: image: use the new helpers for the DIR825B1 images SVN-Revision: 33245	2012-08-23 12:17:36 +00:00
Gabor Juhos	b7e05e3a59	ar71xx: image: use the new helpers for the CyberTAN images SVN-Revision: 33244	2012-08-23 12:14:26 +00:00
Gabor Juhos	292f074ad7	ar71xx: image: use the new helpers for the Cameo933x images SVN-Revision: 33243	2012-08-23 12:11:17 +00:00
Gabor Juhos	4c9a428614	ar71xx: image: use the new helpers for the Cameo913x images SVN-Revision: 33242	2012-08-23 12:08:07 +00:00
Gabor Juhos	19d840980f	ar71xx: image: use the new helpers for the Cameo7240 images SVN-Revision: 33241	2012-08-23 12:04:57 +00:00
Gabor Juhos	ce91228e2b	ar71xx: image: use the new helpers for the AthGzip images SVN-Revision: 33240	2012-08-23 12:01:47 +00:00
Gabor Juhos	70e3dda99c	ar71xx: image: use the new helpers for the AthLzma images SVN-Revision: 33239	2012-08-23 11:58:37 +00:00
Gabor Juhos	31a88650d7	ar71xx: image: use the new helpers for the ALFA images SVN-Revision: 33238	2012-08-23 11:55:27 +00:00
Gabor Juhos	2379e6f2a3	ar71xx: image: add a few helper functions These functions will be used to simplify the Makefile. SVN-Revision: 33237	2012-08-23 11:52:18 +00:00
Gabor Juhos	6ebc77af73	ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template SVN-Revision: 33236	2012-08-23 11:49:07 +00:00
Hauke Mehrtens	847afa343f	update profiles * add profile for BCM4705 based SoC using tg3 instead of b44 * remove redundant 105-Atheros.mk * reorder SVN-Revision: 33235	2012-08-22 21:54:06 +00:00
Gabor Juhos	a2f82cf7ec	ar71xx: add profile and build image for the TEW-712BR SVN-Revision: 33234	2012-08-22 20:18:44 +00:00

... 6 7 8 9 10 ...

9368 commits