KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22266 commits 1 branch 0 tags 154 MiB
Commit graph

9251 commits

Author SHA1 Message Date
Gabor Juhos
ee9376d153 generic: swconfig: use led_set_brightness in LED control code 
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33946
 2012-10-26 18:58:18 +00:00
Gabor Juhos
1127781d40 generic: add missing symbols for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33945
 2012-10-26 18:58:15 +00:00
Gabor Juhos
ff481a5518 ar71xx: reject TP-Link images containing a bootloader 
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33944
 2012-10-26 18:58:13 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
 2012-10-26 18:53:44 +00:00
Florian Fainelli
c691d165c7 add 3.6 kernel configuration 
SVN-Revision: 33942
 2012-10-26 15:24:19 +00:00
Florian Fainelli
9af90aa80c add missing 6345 clock bits patch to 3.6 patches 
SVN-Revision: 33941
 2012-10-26 15:24:14 +00:00
Florian Fainelli
fad6afdf06 add some more 3.6 config symbols 
SVN-Revision: 33940
 2012-10-26 15:24:10 +00:00
Florian Fainelli
8d69af7c9f add preliminary support for 3.6 kernel 
SVN-Revision: 33936
 2012-10-25 21:16:51 +00:00
Hauke Mehrtens
6a699a8ae8 brcm47xx: check for .ELF header in partition parser 
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.

This closes #11420

Thank you b.sander for the patch.

SVN-Revision: 33935
 2012-10-25 19:49:20 +00:00
Hauke Mehrtens
d4ef5de604 kernel: add PCI id 14e4:4350 to ssb 
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.

SVN-Revision: 33929
 2012-10-25 15:50:47 +00:00
Felix Fietkau
1e2962e63c kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again 
SVN-Revision: 33923
 2012-10-25 15:11:45 +00:00
Felix Fietkau
5591188ac3 kernel: refresh config files using kconfig.pl 
SVN-Revision: 33922
 2012-10-25 15:11:40 +00:00
Hauke Mehrtens
dca633f1c8 kernel: update bcma and ssb to master-2012-10-18 from wireless-testing 
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920
 2012-10-25 14:33:47 +00:00
Florian Fainelli
dea2da55df fix Ethernet DMA for 636x and 6328 after r33916 
SVN-Revision: 33918
 2012-10-25 11:54:41 +00:00
Florian Fainelli
917670922b add support for the Dynalink RTA770BW board 
This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
 2012-10-24 21:25:22 +00:00
Florian Fainelli
bdfcbb8bee make BCM6345 Ethernet DMA changes runtime checks 
The semantics of the DMA engine are identical, we just have a couple of
special case handling.

SVN-Revision: 33916
 2012-10-24 21:25:10 +00:00
Florian Fainelli
df6f9072ab ARM: fix XZ decompressor stub build failure on strstr() 
SVN-Revision: 33915
 2012-10-24 15:57:31 +00:00
Florian Fainelli
b5c27880ee fixup generic 3.6 kernel config 
It was not meant to be committed as-is in r33911

SVN-Revision: 33914
 2012-10-24 15:57:24 +00:00
Florian Fainelli
a6bfca90b0 fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set 
This issue got introduced while porting the patch over 3.6 in r33897

SVN-Revision: 33913
 2012-10-24 13:23:20 +00:00
Florian Fainelli
7e856e5a97 make all 3.6 patches apply and build 
SVN-Revision: 33911
 2012-10-24 13:05:22 +00:00
Florian Fainelli
4afb91a12f swconfig: get rid of the NLA_PUT_* macros 
Upstream kernel 3.6 has removed this usage, use the plain functions directly as
intended.

SVN-Revision: 33906
 2012-10-24 13:05:04 +00:00
Jo-Philipp Wich
f600ec5b3b x86: allow both old and new grub signatures in sysupgrade 
SVN-Revision: 33898
 2012-10-23 16:34:00 +00:00
Imre Kaloz
949b46d13d linux 3.6 support (work in progress) 
SVN-Revision: 33897
 2012-10-23 12:21:34 +00:00
Jonas Gorski
0d2cf5f9e3 kernel: move the bcma fallback sprom fix to generic 
bcm63xx needs the bcma fallback sprom fix, too.

SVN-Revision: 33896
 2012-10-23 10:57:49 +00:00
Jonas Gorski
0cc4bed41c add support for Comtrend AR5381u. 
Router: Comtrend AR5381u.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33895
 2012-10-23 10:57:47 +00:00
Jonas Gorski
d73871fb18 add support for Comtrend AR5387un. 
Router: Comtrend AR5387un.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33894
 2012-10-23 10:57:44 +00:00
Jonas Gorski
e93725a743 add support for HomeStation ADB P.DG A4001N. 
Router: HomeStation ADB P.DG A4001N.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33893
 2012-10-23 10:57:39 +00:00
Felix Fietkau
95e642632a x86: correct image magic for grub2 images 
Sysupgrade broke on x86 when grub2 superceded grub.  This patch
corrects tha magic_word to be expected in grub2 combined images.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 33890
 2012-10-22 16:06:29 +00:00
Florian Fainelli
61686a1514 add back support for BCM6345 Ethernet DMA engine 
SVN-Revision: 33889
 2012-10-22 12:57:22 +00:00
Florian Fainelli
eeed82c04e fix clocks bits for BCM6345 
SVN-Revision: 33888
 2012-10-22 12:57:14 +00:00
Florian Fainelli
ca25e61c6c refresh 3.3 patches 
SVN-Revision: 33887
 2012-10-21 21:30:30 +00:00
Jonas Gorski
e6171dfb2c Add F@ST2604 board support. 
Add Sagem F@ST2604 board support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 33886
 2012-10-21 14:35:06 +00:00
Gabor Juhos
f1f388d527 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
 2012-10-19 18:32:49 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
 2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
 2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
 2012-10-18 07:23:12 +00:00
Gabor Juhos
25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
 2012-10-18 07:23:11 +00:00
Gabor Juhos
462a53c367 ramips: add profile and build image for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
 2012-10-18 07:23:10 +00:00
Gabor Juhos
d3c368c324 ramips: add user-space support for the TEW-692GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
 2012-10-18 07:23:07 +00:00
Gabor Juhos
7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board 
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
 2012-10-18 07:23:06 +00:00
Gabor Juhos
bf9ae9432b ramips: add profile and build image for the DIR-645 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
 2012-10-18 07:23:04 +00:00
Gabor Juhos
06edafd079 ramips: add user space support for the DIR-645 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
 2012-10-18 07:23:03 +00:00
Gabor Juhos
d1a253a2fd ramips: rt3883: add inital support for the DIR-645 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33843
 2012-10-18 07:23:02 +00:00
Gabor Juhos
e962c16a88 ramips: use get_magic_long in sysupgrade image check 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33842
 2012-10-18 07:23:00 +00:00
Gabor Juhos
0045449b1b generic: add driver for the the RTL8367R{B,-VB} switches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33839
 2012-10-18 07:22:56 +00:00
Felix Fietkau
96fa602499 ixp4xx: add sysupgrade support 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/ixp4xx/base-files/lib/ixp4xx.sh           |   25 ++
 target/linux/ixp4xx/base-files/lib/upgrade/platform.sh |  156 +++++++++++++++++
 target/linux/ixp4xx/image/Makefile                     |   11 +
 3 files changed, 192 insertions(+)

SVN-Revision: 33828
 2012-10-17 22:03:46 +00:00
Felix Fietkau
879b7a7a9b cns3xxx: update FIQ header file and disable RWFO 
Update header file appropriately and disable read for ownership

Note that the FIQ support implements a workaround that provides a performance
boost over the traditional upstream workaround which ensures cache lines
are exclusive on driver CPU using 'read for ownership'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/config-3.3                                |    2 +-
 target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch |    9 ++++-----
 2 files changed, 5 insertions(+), 6 deletions(-)

SVN-Revision: 33827
 2012-10-17 22:03:37 +00:00
John Crispin
6993e19532 drop GPIODEV platform code 
SVN-Revision: 33825
 2012-10-17 21:53:37 +00:00
Gabor Juhos
7a72f01a72 ar71xx: merge machine support patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33820
 2012-10-17 18:27:50 +00:00
Gabor Juhos
2e1bc1e15b ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33819
 2012-10-17 18:27:48 +00:00
Gabor Juhos
31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
 2012-10-17 18:27:47 +00:00
Gabor Juhos
5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
 2012-10-17 18:27:45 +00:00
Gabor Juhos
35a91a4fe8 ar71xx: OM2P-HS sysupgrade support 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33803
 2012-10-17 08:26:05 +00:00
Gabor Juhos
c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
 2012-10-17 08:26:01 +00:00
Florian Fainelli
254d851d8a nuport-mac: various fixes 
- properly check for the link up condition in the phylib adjust callback
- do not assign skb->dev, eth_type_trans() already does it
- handle skb allocation failures in the refill path

SVN-Revision: 33780
 2012-10-15 21:03:57 +00:00
Florian Fainelli
60ecd5fe04 merge the RDC R-321x target as a subtarget of x86 
SVN-Revision: 33779
 2012-10-15 18:54:34 +00:00
Gabor Juhos
f1283d8583 ar71xx: fix sysupgrade for jjPlus JWAP003 
[juhosg: change commit message]

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33769
 2012-10-14 16:24:26 +00:00
Gabor Juhos
1944f7b916 ar71xx: ew-dorin: added ethernet switch configuration 
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33768
 2012-10-14 16:24:25 +00:00
Gabor Juhos
62ab2b0da6 ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC 
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.

[juhosg: fix OpenMesh template instead of use of string substitution]

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33767
 2012-10-14 16:24:22 +00:00
Florian Fainelli
e4bebad4f7 add Actiontec PK5000 LEDs 
Also share them between the GT701 and the PK5000.

Patch from Daniel Gimpelevich.

SVN-Revision: 33756
 2012-10-13 17:47:45 +00:00
Florian Fainelli
d78371f5c0 vlynq: rework probing and clocking setup 
Handle the different vlynq device versions, and make the vlynq code more
in line with the original vlynq implementation.

Patch from Daniel Gimpelevich.

SVN-Revision: 33755
 2012-10-13 17:47:36 +00:00
Florian Fainelli
0f04f7479c remove the squashfs alignement define 
Patch from Daniel Gimpelevich.

SVN-Revision: 33754
 2012-10-13 17:47:30 +00:00
Florian Fainelli
ec4e61e558 handle LOADER_MAGIC2 in ar7part 
This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich.

SVN-Revision: 33753
 2012-10-13 17:47:25 +00:00
Florian Fainelli
e5a65db1b5 increase the flash resource size to its maximum value 
CFI detection will reduce the resource size to its real value.

Patch from Daniel Gimpelevich.

SVN-Revision: 33752
 2012-10-13 17:47:20 +00:00
Florian Fainelli
7205421c5b reinstate the fixed PHY fallback for devices with undetectable switches 
At least devices without a switch present on the MDIO bus still get a valid
link and work as expected (such as the Linksys WAG54Gv2).

SVN-Revision: 33751
 2012-10-13 17:47:14 +00:00
Florian Fainelli
3794a6a9dd enable mvswitch driver 
And fix the default network configuration to create the required VLANs.

Patch from Daniel Gimpelevich.

SVN-Revision: 33750
 2012-10-13 17:47:09 +00:00
Florian Fainelli
99598d2473 use the second available LED to encore mode boot states 
Patch from Daniel Gimpelevich.

SVN-Revision: 33749
 2012-10-13 17:47:04 +00:00
Florian Fainelli
31c324f451 use wpad-mini instead of hostapd 
SVN-Revision: 33744
 2012-10-13 17:46:32 +00:00
Imre Kaloz
c24df51736 add support for new Option modules (GTM66xxWFS/GTM67xxWFS) 
Add new device ID's for the hso driver as well as usb storage

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33743
 2012-10-13 06:58:42 +00:00
Jo-Philipp Wich
4cfd3dc8ed x86/kvm_guest: enable PCIE support 
SVN-Revision: 33741
 2012-10-12 16:51:31 +00:00
Florian Fainelli
e7b2a4170c copy initramfs kernel to bin directory 
SVN-Revision: 33726
 2012-10-11 15:45:24 +00:00
John Crispin
ba6751058b gpiodev/gpioctl RIP 
SVN-Revision: 33725
 2012-10-11 11:58:09 +00:00
Imre Kaloz
88a740ff80 fix (really this time) laguna UART config 
Properly terminate the correct platform resource for laguna UARTs

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33721
 2012-10-11 09:51:35 +00:00
Imre Kaloz
9b22ca8042 The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci). 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33720
 2012-10-11 07:59:06 +00:00
Imre Kaloz
31c2f1a4d2 fix non terminated uart resources for laguna 
Resolves crashes when probing multiple serial devices

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33719
 2012-10-11 07:47:27 +00:00
Florian Fainelli
bc3b111cfd generate vmlinux.srec and vmlinux.bin from srec2bin 
Useful for loading the kernel into RAM using ADAM2/PSPBoot.

SVN-Revision: 33718
 2012-10-11 06:45:07 +00:00
Felix Fietkau
d0ec348ded kernel: fq_codel: dont reinit flow state 
Keep fq_codel flow state around after queue empty.

SVN-Revision: 33687
 2012-10-10 11:54:31 +00:00
Felix Fietkau
f933719138 kernel: dont delay acks after ECN CE 
Bugfix from linux head - don't delay acks from ECN congestion
experienced in some situations.

SVN-Revision: 33686
 2012-10-10 11:54:27 +00:00
Felix Fietkau
85871f283a cns3xxx: Fix GPIO configuration for Gateworks Laguna boards 
The Laguna boards do not use all the same pins for SDHCI as the Cavium
reference board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33684
 2012-10-10 11:39:02 +00:00
Felix Fietkau
6bb7409e5a cns3xxx: Fix laguna arm11mpcore watchdog 
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where
all mpcore-wdt boards point the driver base too.  I believe this is wrong
because 0x600 is aliased to the timer/watchdog of the 'current CPU' where
0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog.  Thus
if your timer/watchdog application is switching between CPU's it can end up
writing to the wrong CPU's registers which results in random board resets
from watchdog timeouts etc.

This patch forces the timer/watchdog driver to use CPU0's registers always.
Its my opinion that other mpcore-wdt boards should be doing the same thing.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33683
 2012-10-10 11:38:58 +00:00
Felix Fietkau
f570c806ef mtd: allow partial block unlock 
This allows sysupgrade for devices such as the Gateworks Avila/Cambria
product families based on the ixp4xx using the redboot bootloader with
combined FIS directory and RedBoot config partitions on larger FLASH
devices with larger eraseblocks.

This second iteration of this patch addresses previous issues:
  - whitespace breakage fixed
  - unlock in all scenarios
  - simplification and fix logic bug

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33681
 2012-10-10 11:38:44 +00:00
Felix Fietkau
cae6f4ddb4 ixp4xx: enable OPTIMIZE_FOR_SIZE 
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33679
 2012-10-10 11:38:28 +00:00
Felix Fietkau
f14b8d43f2 ixp4xx: add missing reboot handlers (fixes #11577) 
SVN-Revision: 33672
 2012-10-09 15:38:55 +00:00
Felix Fietkau
856fba88d9 x86: remove the reboot=bios command line parameter (#12193) 
SVN-Revision: 33671
 2012-10-09 15:20:11 +00:00
Jonas Gorski
fbe0af3237 bcm63xx: remove bcm_tag usage in kernel 
Fixes #12292.

SVN-Revision: 33670
 2012-10-09 08:08:49 +00:00
Jonas Gorski
6a000ba37a bcm63xx: fix 963281TAN image names 
it's a 6328, not a 6348.

SVN-Revision: 33665
 2012-10-08 13:08:40 +00:00
Jonas Gorski
997ace7e5e firmware-utils: move bcm_tag.h here 
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.

SVN-Revision: 33655
 2012-10-08 09:59:50 +00:00
Jonas Gorski
f16ea6be3f bcm63xx: fix entering failsafe through button 
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.

SVN-Revision: 33653
 2012-10-08 09:59:44 +00:00
Felix Fietkau
e5bb1a1bc7 cns3xxx: add sysupgrade support 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/base-files/lib/cns3xxx.sh          |   22 ++
 target/linux/cns3xxx/base-files/lib/upgrade/platform.sh |  122 ++++++++++++++++
 target/linux/cns3xxx/image/Makefile                     |   19 +-
 3 files changed, 159 insertions(+), 4 deletions(-)

SVN-Revision: 33650
 2012-10-07 23:24:02 +00:00
Felix Fietkau
68449e2e01 cns3xxx: add GW2383 board support 
Add GPIO/LED support for Gateworks GW2383

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/patches-3.3/300-laguna_support.patch |   18 +++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

SVN-Revision: 33649
 2012-10-07 23:23:58 +00:00
Felix Fietkau
6b778f57aa cns3xxx: fix gpio access and add gpio IRQ support 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch |  536 ++++++++++++++++++++
 1 file changed, 536 insertions(+)

SVN-Revision: 33648
 2012-10-07 23:23:52 +00:00
Felix Fietkau
bca070dfbe ixp4xx: update Gateworks Avila board support 
Several new features for newer boards:
 - add additional UARTs present on some boards
 - add additional LEDs present on some boards
 - add HSS audio device codec present on some boards
 - add support for GSC present on some boards
 - add per model setup support for newer boards
 - set FLASH window per-model for boards with larger FLASH

Some fixes:
 - add IRQ mapping for additional PCI devices (USB Host)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33647
 2012-10-07 23:23:47 +00:00
Felix Fietkau
22b86fec7c ixp4xx: patch cleanup 
roll all avila patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33646
 2012-10-07 23:23:43 +00:00
Felix Fietkau
d660734a1b ixp4xx: Add HSS audio driver for Avila product family 
Add ixp4xx HSS audio driver for Avila

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33645
 2012-10-07 23:23:39 +00:00
Felix Fietkau
ce692ed043 ixp4xx: update Gateworks Cambria board support 
Several new features for newer boards:
 - add irq mapping for additional devices
 - add platform data for i2c bus to SFP modules
 - add additional UARTs present on some boards
 - increased R/W delay for expansion bus UARTs
 - add additional LEDs present on some boards
 - add GPIO exports and configuration
 - add ENET switch config present on some boards
 - add support for GSC present on some boards
 - added per model setup support for newer boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33644
 2012-10-07 23:23:34 +00:00
Felix Fietkau
21d182b9e5 ixp4xx: patch cleanup 
roll all cambria patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33643
 2012-10-07 23:23:29 +00:00
Felix Fietkau
d3567cc886 ixp4xx: split out new UART I/O to its own patch 
This is being done for general cleanup

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33642
 2012-10-07 23:23:25 +00:00
Felix Fietkau
1abbe676d1 x86: rename the iso file to openwrt-x86-generic.iso 
SVN-Revision: 33641
 2012-10-07 23:05:39 +00:00
Felix Fietkau
0dd7644ec7 x86: remove grub-legacy 
SVN-Revision: 33640
 2012-10-07 23:01:56 +00:00
Felix Fietkau
a1bcd25082 x86: add grub2 iso support 
SVN-Revision: 33639
 2012-10-07 23:01:52 +00:00
Felix Fietkau
53cc34e517 x86/generic: enable cdrom + iso9660 support 
SVN-Revision: 33638
 2012-10-07 23:01:47 +00:00
Gabor Juhos
befb648642 ar71xx: build image for the TL-WR841N/ND v8 
SVN-Revision: 33623
 2012-10-04 20:16:06 +00:00
Gabor Juhos
02a85dfd85 ar71xx: user-space support for TL-WR841N/ND v8 
SVN-Revision: 33622
 2012-10-04 20:16:05 +00:00
Gabor Juhos
196c6c5b45 ar71xx: add support for the TL-WR841N/ND v8 board 
SVN-Revision: 33621
 2012-10-04 20:16:03 +00:00
Hauke Mehrtens
07234dc8bd bcma: do not initialize deactivated PCIe cores 
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

SVN-Revision: 33620
 2012-10-04 15:45:54 +00:00
Hauke Mehrtens
2819890839 use memcmp in mem size detection as suggested by blogic 
SVN-Revision: 33619
 2012-10-04 15:42:12 +00:00
Florian Fainelli
5e0df9582b fix typo in 05_set_ether_mac_rdc preinit script (#11166) 
SVN-Revision: 33618
 2012-10-04 12:36:50 +00:00
Gabor Juhos
d832cd11f8 ramips: add image for ALL0256N-8M 
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614
 2012-10-04 06:34:09 +00:00
Florian Fainelli
47c5c4df1c add Default and Gumstix PXA profiles 
Gumstix builds a fake flash image for usage in qemu

SVN-Revision: 33609
 2012-10-03 16:15:05 +00:00
Florian Fainelli
48daf407a6 advertise jffs2 feature 
SVN-Revision: 33607
 2012-10-03 16:12:57 +00:00
Florian Fainelli
bb7ac8ae7d remove broken flag 
SVN-Revision: 33606
 2012-10-03 16:12:39 +00:00
Florian Fainelli
8f44ba1ae2 fix build with latest gpiolib changes 
SVN-Revision: 33605
 2012-10-03 16:12:03 +00:00
Florian Fainelli
d504b6251c more convertions to {read,write}_relaxed I/O accessors 
SVN-Revision: 33604
 2012-10-03 16:10:47 +00:00
Felix Fietkau
a2e1dce829 cns3xxx: add missing kernel config symbol 
SVN-Revision: 33603
 2012-09-30 15:31:34 +00:00
Hauke Mehrtens
9f083117d1 refresh patches 
SVN-Revision: 33602
 2012-09-30 11:45:53 +00:00
Hauke Mehrtens
642fe7f10a bcma: use fallback sprom if sprom on card was not valid 
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

SVN-Revision: 33601
 2012-09-30 11:45:31 +00:00
Hauke Mehrtens
42952fd94f bcma: initialize sprom earlier 
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.

SVN-Revision: 33600
 2012-09-30 11:44:44 +00:00
Hauke Mehrtens
2d40590a23 run make kernel_oldconfig 
SVN-Revision: 33599
 2012-09-30 11:44:04 +00:00
Hauke Mehrtens
e5eefed084 ignore the last page on bcma based SoCs 
SVN-Revision: 33598
 2012-09-30 11:43:40 +00:00
Hauke Mehrtens
c9feffc332 Fix reading sprom from nvram without a prefix 
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.

SVN-Revision: 33597
 2012-09-30 11:43:13 +00:00
Hauke Mehrtens
4d5c75a54e improve the check for the memory size 
This will hopefully fix bug #9360 and #9097 in trunk.

SVN-Revision: 33596
 2012-09-30 11:42:16 +00:00
John Crispin
f3cab53f27 dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency 
SVN-Revision: 33593
 2012-09-28 21:54:31 +00:00
John Crispin
0afc7b9b6d add support for adm6996 phy 
SVN-Revision: 33592
 2012-09-28 21:38:02 +00:00
John Crispin
9dc218f88f tapi was not registeredproperly for most arcadyan boards 
SVN-Revision: 33591
 2012-09-28 20:57:06 +00:00
Imre Kaloz
c53936bb4b Add FIQ support for cns3xxx 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33581
 2012-09-28 17:35:35 +00:00
Imre Kaloz
2f2115c436 Update board support for Gateworks Laguna Product family 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33580
 2012-09-28 17:34:18 +00:00
Imre Kaloz
70729bb4a5 USB iso mode fixes 
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33579
 2012-09-28 17:31:22 +00:00
Gabor Juhos
170cd7a19a ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
SVN-Revision: 33575
 2012-09-27 20:05:42 +00:00
Gabor Juhos
a0df3fa315 generic: enable CONFIG_USB_EHCI_TT_NEWSCHED 
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.

See: http://www.spinics.net/lists/linux-usb/msg31993.html

SVN-Revision: 33574
 2012-09-27 20:05:39 +00:00
Gabor Juhos
e3bcbeb427 ramips: add memory detection code for RT5350 
SVN-Revision: 33571
 2012-09-27 10:18:15 +00:00
Gabor Juhos
80d2da9f0f ramips: allow to use custom code for memory size detection 
SVN-Revision: 33570
 2012-09-27 10:18:14 +00:00
Florian Fainelli
4ea68a13e3 include sys/resource.h in arch/um/os-Linux/start_up.c (#12155) 
Required for recent (e)glibc systems

SVN-Revision: 33569
 2012-09-27 09:21:01 +00:00
Imre Kaloz
68f8db6731 fix ncores for single-core systems. 
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33566
 2012-09-27 08:07:17 +00:00
Imre Kaloz
9ace6ace8f add i2c retries 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33565
 2012-09-27 08:06:13 +00:00
Imre Kaloz
7dd6b04c28 fix pcie abort handling 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33564
 2012-09-27 08:05:19 +00:00
Florian Fainelli
caf900f0e4 remove kmod-spi-bitbang 
This is no longer a dependency of kmod-spi-bcm63xx

SVN-Revision: 33562
 2012-09-26 20:11:37 +00:00
Gabor Juhos
579e9cded8 generic: add upstream commit id to codel patches and refresh those 
SVN-Revision: 33560
 2012-09-26 14:17:17 +00:00
Florian Fainelli
eb97933e2a backport the upstream entropy changes (#11951) 
SVN-Revision: 33559
 2012-09-26 12:54:01 +00:00
Florian Fainelli
4a67ccb163 get rid of the IRQF_SAMPLE_RANDOM flag 
SVN-Revision: 33558
 2012-09-26 12:53:58 +00:00
Florian Fainelli
c27c0d1ff0 add wmbus-repeater to the dLAN USB Extender profile 
SVN-Revision: 33556
 2012-09-25 20:56:50 +00:00
Florian Fainelli
c7cf4def64 enable multicast and advanced ip routers configs 
SVN-Revision: 33555
 2012-09-25 20:53:34 +00:00
Florian Fainelli
d95f612340 add kmod-usb-serial-ftdi to the dLAN USB Extender profile 
SVN-Revision: 33554
 2012-09-25 20:50:20 +00:00
John Crispin
d8c04821c3 make uci-defaults switch detection work on rt5350 
SVN-Revision: 33549
 2012-09-25 14:47:18 +00:00
John Crispin
34d57ebd8b add ethernet support for rt5350 
SVN-Revision: 33548
 2012-09-25 14:47:08 +00:00
John Crispin
af0cd76937 make ramips ethernet use a register mapping table 
SVN-Revision: 33547
 2012-09-25 14:46:58 +00:00
Hauke Mehrtens
0818180715 activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544
 2012-09-25 14:04:59 +00:00
Gabor Juhos
ffc0ea6c5d ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards 
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

SVN-Revision: 33540
 2012-09-25 12:57:41 +00:00
Gabor Juhos
e7b1949d87 ar71xx: automatically find WLAN calibration data on TEW-673GRU 
SVN-Revision: 33539
 2012-09-25 12:57:40 +00:00
Gabor Juhos
8ed8e51e74 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
SVN-Revision: 33538
 2012-09-25 12:57:38 +00:00
Gabor Juhos
e2504a977a ar71xx: add missing backslash to uci-defaults/leds (closes #12240) 
SVN-Revision: 33537
 2012-09-25 12:49:43 +00:00
John Crispin
394a560a9a unbreak port mapping detection 
SVN-Revision: 33536
 2012-09-25 09:51:48 +00:00
Gabor Juhos
e70ad61e44 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

SVN-Revision: 33535
 2012-09-24 18:45:56 +00:00
Felix Fietkau
493b7c7f3c x86: avoid using grub prepare when using grub2 
SVN-Revision: 33525
 2012-09-23 09:59:56 +00:00
Felix Fietkau
999252dccc x86-generic: enable a few more common kernel options/drivers 
SVN-Revision: 33516
 2012-09-22 23:29:20 +00:00
Felix Fietkau
b968dcd52e kernel: increase log buffer size 
SVN-Revision: 33515
 2012-09-22 23:10:42 +00:00
Felix Fietkau
0260262f0b x86: enable usb storage support for the generic subtarget to support booting from usb devices 
SVN-Revision: 33514
 2012-09-22 21:15:59 +00:00
Felix Fietkau
52e8ee0666 x86: add support for building grub2 images 
SVN-Revision: 33513
 2012-09-22 20:10:42 +00:00
Felix Fietkau
ce4244c8af x86: split generic image building into a separate script 
SVN-Revision: 33511
 2012-09-22 20:10:35 +00:00
Felix Fietkau
6c02dd2b04 x86: rename gen_image_x86.sh to gen_image_grub.sh 
SVN-Revision: 33510
 2012-09-22 20:10:31 +00:00
Felix Fietkau
d6ca46cd25 cns3xxx: fix ethernet driver tx completion and queue stop/start 
SVN-Revision: 33504
 2012-09-22 00:34:53 +00:00
Felix Fietkau
fb71465a4e cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames 
SVN-Revision: 33503
 2012-09-22 00:34:49 +00:00
Imre Kaloz
ed3597d927 move gpio stuff into the right file 
SVN-Revision: 33502
 2012-09-21 05:40:04 +00:00
Imre Kaloz
a74cf6f9a8 refresh patches 
SVN-Revision: 33501
 2012-09-21 05:38:16 +00:00
Felix Fietkau
15159604d9 cns3xxx: add a small optimization for rx offload 
SVN-Revision: 33500
 2012-09-21 00:13:12 +00:00
Felix Fietkau
a1c016fe16 cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames 
SVN-Revision: 33499
 2012-09-21 00:13:08 +00:00
Felix Fietkau
029aaf4514 cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining 
SVN-Revision: 33498
 2012-09-20 20:27:18 +00:00
Felix Fietkau
c4a419b445 kernel: enable perf events when enabling profiling, fixes oprofile on arm 
SVN-Revision: 33497
 2012-09-20 20:27:14 +00:00
Hauke Mehrtens
fd7b2b5141 deactivate mips wait instruction for MIPS 74K on Broadcom SoCs 
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.

SVN-Revision: 33496
 2012-09-20 14:51:57 +00:00
Felix Fietkau
1067ccf9f7 cns3xxx: remove the broken flag 
SVN-Revision: 33493
 2012-09-19 23:50:25 +00:00
Felix Fietkau
2db9e9f624 cns3xxx: fix kernel config 
SVN-Revision: 33492
 2012-09-19 23:50:22 +00:00
Felix Fietkau
34d30654ae cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists 
SVN-Revision: 33491
 2012-09-19 23:50:18 +00:00
Felix Fietkau
eff9405752 cns3xxx: fix ethernet tx checksum offload 
SVN-Revision: 33490
 2012-09-19 23:50:15 +00:00
Felix Fietkau
dd1fb8289f cns3xxx: merge ethernet driver changes from gateworks 
SVN-Revision: 33489
 2012-09-19 23:50:12 +00:00
Felix Fietkau
190b4344a3 cns3xxx: build images for the old boot loader and the new one (default to the new one) 
SVN-Revision: 33488
 2012-09-19 23:50:09 +00:00
Felix Fietkau
59b1d018b1 cns3xxx: fix the ethernet driver makefile 
SVN-Revision: 33487
 2012-09-19 23:50:06 +00:00
Felix Fietkau
c9139c150c cns3xxx: reorganize patches, fix pcie io space init order 
SVN-Revision: 33486
 2012-09-19 23:50:02 +00:00
Felix Fietkau
7cd4968d0e cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls 
SVN-Revision: 33485
 2012-09-19 23:49:58 +00:00
Felix Fietkau
2f39fa872a cns3xxx: add missing callbacks for the laguna machine support 
SVN-Revision: 33484
 2012-09-19 23:49:50 +00:00
Florian Fainelli
57bd95734d brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package 
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33474
 2012-09-19 15:13:33 +00:00
Florian Fainelli
136eb6815c omap24xx/profiles/n810: remove reference to non-existing package 
The package block-hotplug doesn't exist, removing reference to it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33473
 2012-09-19 15:13:30 +00:00
Hauke Mehrtens
db18fa388d update fix-boot patch. 
Do not change the code any more but use the kconfig options

SVN-Revision: 33463
 2012-09-19 10:18:36 +00:00
Hauke Mehrtens
eeb3ad1860 update gpio patches 
SVN-Revision: 33462
 2012-09-19 10:17:51 +00:00
Gabor Juhos
79ffd1032a ar71xx: fix a typo in TEW-637GRU image names 
SVN-Revision: 33460
 2012-09-18 14:32:25 +00:00
Gabor Juhos
9a11f882d7 ar71xx: revert DIR-825-B1 wholeflash image support. 
It should be implemmented in a cleaner way.

This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"

SVN-Revision: 33459
 2012-09-18 14:30:57 +00:00
Florian Fainelli
ee16fea079 disable VFPv4 probing 
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.

SVN-Revision: 33458
 2012-09-18 10:00:56 +00:00
Florian Fainelli
4d2fb44f0c partially revert r33403 
The target CFLAGS were also accidentally changed

SVN-Revision: 33457
 2012-09-18 10:00:46 +00:00
Gabor Juhos
a7c5c4390a ar71xx: register the NAND flash controller device on DB120 
SVN-Revision: 33455
 2012-09-17 20:30:57 +00:00
Gabor Juhos
7c85646176 ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
SVN-Revision: 33454
 2012-09-17 20:30:55 +00:00
Gabor Juhos
3bdf0bc36f ar71xx: ar934x_nfc: increase DMA retry count 
SVN-Revision: 33453
 2012-09-17 20:30:54 +00:00
Gabor Juhos
b7cb43f6a6 ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
SVN-Revision: 33452
 2012-09-17 20:30:53 +00:00
Gabor Juhos
96dde2e591 ar71xx: ar934x_nfc: fix RNDOUT operation 
SVN-Revision: 33451
 2012-09-17 20:30:51 +00:00
Gabor Juhos
338b698fb6 ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
SVN-Revision: 33450
 2012-09-17 20:30:50 +00:00
Daniel Dickinson
0f254b4b67 dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). 
SVN-Revision: 33447
 2012-09-17 14:17:12 +00:00
Felix Fietkau
e8893fdf7a ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x 
SVN-Revision: 33446
 2012-09-17 11:17:29 +00:00
Felix Fietkau
ed14ffc7da ar71xx: fix WP543 image builds 
SVN-Revision: 33413
 2012-09-15 10:21:21 +00:00
John Crispin
223db72385 D-Link DAP-1350; Avoid bricking esw config 
This is a patch to connect eth0.1 (lan) to the only
ethernet connector available.

D-Link DAP-1350 goes bricked with AA 12.09-beta.

This is because the current esw configuration for the
board connects eth0.2 (wan) to the *ONE and ONLY*
ethernet connector available, preventing initial access
to the board through 192.168.1.1 on eth0.1 after flashing,
effectively bricking the board.

There are things that should be done to make this board
really useful, but for AA 12.09, this one liner is
indispensable.

Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 33411
 2012-09-15 09:28:28 +00:00
John Crispin
bf355f8ee9 ramips/rt3883: fix a typo in the ASUS profile 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33410
 2012-09-15 09:20:50 +00:00
Florian Fainelli
a2b29c591e partially revert r33403 
SVN-Revision: 33409
 2012-09-14 15:44:25 +00:00
Florian Fainelli
0d464a8ac3 set DEVICE_TYPE to developerboard 
SVN-Revision: 33408
 2012-09-14 15:37:51 +00:00
Florian Fainelli
42846febb9 fix sparc32 assembler failures with newer toolchains 
SVN-Revision: 33407
 2012-09-14 15:37:40 +00:00
Florian Fainelli
39ddc9105c refresh patches so they apply cleanly 
SVN-Revision: 33406
 2012-09-14 15:37:12 +00:00
Florian Fainelli
4128b8e189 set DEVICE_TYPE to developperboard 
SVN-Revision: 33403
 2012-09-14 15:36:33 +00:00
Florian Fainelli
2254fc2673 set DEVICE_TYPE to developperboard 
SVN-Revision: 33402
 2012-09-14 15:36:30 +00:00
Gabor Juhos
61dc6e65c0 ar71xx: merge machine support patches 
SVN-Revision: 33389
 2012-09-13 07:26:28 +00:00
Gabor Juhos
5804b9d1b7 ar71xx: register the NAND controller device on the RB2011 
SVN-Revision: 33388
 2012-09-13 07:26:26 +00:00
Gabor Juhos
4fd67c3cd4 ar71xx: add device registration code for the AR934x NAND flash controller 
SVN-Revision: 33387
 2012-09-13 07:26:25 +00:00
Gabor Juhos
10cd35c0e7 ar71xx: package the AR934x NAND driver module 
SVN-Revision: 33386
 2012-09-13 07:26:23 +00:00
Gabor Juhos
1e5fdbeae5 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
SVN-Revision: 33385
 2012-09-13 07:26:22 +00:00
Gabor Juhos
acaf597f4a generic: add MTD_NAND_AR934X symbol 
SVN-Revision: 33384
 2012-09-13 07:26:21 +00:00
Gabor Juhos
43147ffec5 generic: move GENERIC_PWM symbol into the generic config 
SVN-Revision: 33383
 2012-09-13 06:38:31 +00:00
Gabor Juhos
40a5f5c16e ar71xx: define NAND controller base address and register size for AR934X/QCA955x 
SVN-Revision: 33382
 2012-09-12 19:06:38 +00:00
Gabor Juhos
0a42b02126 ramips/rt305x: add initial support for Rt5350 SoC 
Somehow detecting the RAM size in common/setup.c doesn't
work here, it always detects 64M and then crashes on devices
with less RAM.
Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how
it could be, for now I use the mem=32M kernel parameter to get
stuff working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33381
 2012-09-12 19:03:12 +00:00
Hauke Mehrtens
95c141aaac add gpio sysfs entries 
This fixes #10256

SVN-Revision: 33369
 2012-09-11 15:04:20 +00:00
Gabor Juhos
4ee5b528de ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x 
SVN-Revision: 33362
 2012-09-10 14:38:01 +00:00
Gabor Juhos
2e0e38ad69 ar71xx: fix QCA955X_EHCI_SIZE 
SVN-Revision: 33360
 2012-09-10 14:32:54 +00:00
Florian Fainelli
a36bdb2417 fix ixp4xx_hss build failure (#12162) 
SVN-Revision: 33356
 2012-09-10 08:53:21 +00:00
Jo-Philipp Wich
caa66bd150 fix description of nand/Ath5k profile (#12149) 
SVN-Revision: 33352
 2012-09-09 21:40:26 +00:00
Gabor Juhos
aa2f4d4c8d ar71xx: add initial support for RB2011UAS-2HnD 
SVN-Revision: 33349
 2012-09-09 14:05:32 +00:00
Gabor Juhos
3686e18727 ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
SVN-Revision: 33348
 2012-09-09 14:05:30 +00:00
Gabor Juhos
ccabe4a1b4 ar71xx: add RouterBoot related helper routines 
SVN-Revision: 33347
 2012-09-09 14:05:28 +00:00
Gabor Juhos
2323120d5e generic add WLAN calibration data ID to routerboot.h 
SVN-Revision: 33346
 2012-09-09 14:05:26 +00:00
Gabor Juhos
44bf7c7cc1 ar71xx: define MTD partitions for RB2011 
SVN-Revision: 33345
 2012-09-09 14:05:24 +00:00
Gabor Juhos
6ae5ec16e0 ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 33344
 2012-09-09 14:05:22 +00:00
Gabor Juhos
94bac7366c ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
SVN-Revision: 33343
 2012-09-09 14:05:20 +00:00
Gabor Juhos
7592057774 ar71xx: add dynamic MDIO clock calculation 
SVN-Revision: 33342
 2012-09-09 14:05:17 +00:00
Gabor Juhos
f3ecbea052 adm5120: move common routerboot definitions into a separate header file 
Those will be used on the ar71xx platform as well.

SVN-Revision: 33341
 2012-09-09 11:55:42 +00:00
Jonas Gorski
7708138183 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi 
Fixes booting the device with button hotplug enabled (#10785).

SVN-Revision: 33340
 2012-09-09 11:54:56 +00:00
Gabor Juhos
88a5478781 ar71xx: use the RLE library for RB751 
SVN-Revision: 33338
 2012-09-08 17:51:56 +00:00
Gabor Juhos
73df240bb3 ar71xx: add library code for RLE decoding 
It will be used for the MikroTik boards.

SVN-Revision: 33337
 2012-09-08 17:51:54 +00:00
Gabor Juhos
f4be8a76de ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x 
SVN-Revision: 33335
 2012-09-08 13:39:09 +00:00
Gabor Juhos
70d00ac64e ar71xx: refresh kernel patches 
SVN-Revision: 33334
 2012-09-08 13:39:04 +00:00
Florian Fainelli
6771d63284 use the recommended ARM I/O accessors 
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants.

SVN-Revision: 33330
 2012-09-08 09:51:05 +00:00
Daniel Dickinson
c3b7139ab2 dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. 
SVN-Revision: 33326
 2012-09-06 18:15:26 +00:00
Luka Perkov
4c76b3635b lantiq: fix sx76x default uci network configuration 
SVN-Revision: 33324
 2012-09-06 00:09:46 +00:00
Florian Fainelli
3730e6c794 add some ohci workarounds to make ohci work 
SVN-Revision: 33323
 2012-09-05 20:19:29 +00:00
Gabor Juhos
d8b2fef763 ramips: Add missing andmask to ramips_esw register read for recv_good value. 
Add missing andmask to ramips_esw register read for recv_good value.

Without the mask, recv_bad leaks into the recv_good packet count.
Didn't notice the bug before since you don't usually get bad
packets, so I only saw it when I was playing with overlength packets
earlier...

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33322
 2012-09-05 20:08:43 +00:00
Gabor Juhos
04c6143ca9 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. 
Use doubletagging to disable ramips_esw vlan by default, it seems
more reliable.

Daniel Golle found an issue where sometimes (possibly only for
RT3352) the default vlan disable method (clearing en_vlan, untag,
doubletag and putting all ports into vlan 0) doesn't work and the
packets get sent out vlan-tagged with vlan 0.

Instead switch to using the doubletagging method (allow doubletagged
packets, put all ports into vlan 0 with untag enabled) by default.

Unless someone figures out a way to really globally disable vlan for
this switch, this seems like the best (most reliable) option.

I did some tests regarding maximum packet size and did not see any

difference between the two methods, both allow for slightly bigger packets
than the ramips_main.c ethernet driver (ping stops going through
above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until
"ping -s 1490", or about 1532 bytes).

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 33321
 2012-09-05 20:08:42 +00:00
John Crispin
f186bff0ef add missing kvm_guest kernel options 
SVN-Revision: 33319
 2012-09-05 19:38:42 +00:00
Gabor Juhos
069f544d2b ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x 
SVN-Revision: 33318
 2012-09-05 19:26:50 +00:00
Gabor Juhos
81bb246a8d ar71xx: add rssileds to package set in profile for devices which got them. 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33317
 2012-09-05 19:22:51 +00:00
Gabor Juhos
6c7b776ae0 ramips: add rssileds to package set in profile for devices which got them. 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33316
 2012-09-05 19:22:48 +00:00
Florian Fainelli
94a45be66b enable CFI command set 0002 FORCE_WORD_WRITE 
SVN-Revision: 33315
 2012-09-03 20:25:51 +00:00
Florian Fainelli
19cbe80501 pad squashfs image 
SVN-Revision: 33314
 2012-09-03 20:25:46 +00:00
Florian Fainelli
1964753c22 add Generic and dLAN USB Extender profiles 
SVN-Revision: 33313
 2012-09-03 20:25:40 +00:00
Florian Fainelli
e88e20d975 nuport-mac: disable MAC RX and TX during interface close 
Fixes sporadic crashes while reconfiguring the network interface.

SVN-Revision: 33312
 2012-09-03 10:26:01 +00:00
Gabor Juhos
11c3392b7f Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

SVN-Revision: 33310
 2012-08-29 10:37:55 +00:00
Gabor Juhos
eb9a97a360 ar71xx: all0315n: fix ethernet according to vendor info 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33309
 2012-08-29 10:37:54 +00:00
Gabor Juhos
02cb5f9dcd ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds 
SVN-Revision: 33308
 2012-08-29 10:37:53 +00:00
Gabor Juhos
b0da5b73b8 ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 
SVN-Revision: 33307
 2012-08-29 10:37:51 +00:00
Gabor Juhos
54d8a55eed ramips: make built-in switch transparent for ALL0256N and ALL5002 
This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33305
 2012-08-29 10:37:47 +00:00