KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ramips/dts
History
Valentín Kivachuk 30a7ab8f61 ramips: add support for MTC Wireless Router WR1201 
MTC Wireless Router WR1201 is the OEM name of the board. It is also sold
rebranded as STRONG Dual Band Gigabit Router 1200.

Specification:
- SoC: MediaTek MT7621A (880 MHz)
- Flash: 16 MiB
- RAM: 128 MiB
- Wireless: 2.4Ghz(MT7602EN) and 5Ghz (MT7612EN)
- Ethernet speed: 10/100/1000
- Ethernet ports: 4+1
- 1x USB 3.0
- 1x microSD reader
- Serial baud rate of Bootloader and factory firmware: 57600

The OEM webinterface writes only as much bytes as listed in the
uImage header field to the flash. Also, the OEM webinterface
evaluates the name field of uImage header before flashing (the
string "WR1201_8_128")

To flash via webinterface, is mandatory to use first initramfs.bin
and after (from the OpenWrt) the sysupgrade.bin

Some notes:
- Some microSD will not work:

  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: card claims to support voltages below defined range
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card

Signed-off-by: Valentín Kivachuk <vk18496@gmail.com>
2018-11-30 00:20:28 +01:00
..
3G-6200N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G-6200NL.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G150B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
3G300M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
11ACNAS.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
A5-V11.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AC1200RM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AI-BR100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AIR3GII.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0239-3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL0256N.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
ALL5002.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ALL5003.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AP-MT7621A-V60.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AR670W.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
AR725W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC2-v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20i.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC20v4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherC50.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ArcherC50V3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ArcherMR200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ASL26555.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ATP-52B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWAPN2403.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
AWM002-EVB.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
AWUSFREE1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BDCOM-WAP2100-SK.dts ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT 2018-11-29 13:15:44 +01:00
BOCCO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6475ND.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BR-6478AC-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
BROADWAY.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
C108.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CARAMBOLA.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CF-WR800N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CS-QR10.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
CY-SWR1100.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D105.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
D240.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DAP-1522-A1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
DB-WRT01.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCH-M225.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCS-930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DCS-930L-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-300-B7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-320-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-600-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-610-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-615-D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-615-H1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-620-A1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-620-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-645.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-810L.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DIR-860L-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DUZUN-DM06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
DWR-116-A1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
DWR-118-A2.dts ramips: move status led unset to devicetree 2018-10-07 11:34:18 +02:00
DWR-512-B.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
DWR-921-C1.dts ramips: move status led unset to devicetree 2018-10-07 11:34:18 +02:00
E1700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
elecom_wrc-gst.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ESR-9753.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EW1200.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX2700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
EX3700.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F5D8235_V1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F5D8235_V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
F7C027.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FIREWRT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FONERA20N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
FREESTATION5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GB-PC2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
GL-MT750.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5X61.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5661.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HC5661A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5761.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HC5861.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HC5861B.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HC5962.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
HG255D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HLKRM04.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HPM.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HT-TM02.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
HW550-3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
IP2202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N805R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N825R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
JHR-N926R.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
K2P.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ki_rb.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kn_rf.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
kng_rc.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LINKIT7688.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
LR-25G001.dts ramips: fix Lava LR-25G001 invalid led names 2018-11-26 19:40:31 +01:00
M2M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
M4.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MAC1200RV2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MicroWRT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MINIEMBPLUG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MINIEMBWIFI.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MIR3G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
MIWIFI-MINI.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MIWIFI-NANO.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLW221.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MLWG2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MOFI3500-3GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MPRA2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MR-102N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
mt7620a.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
MT7620a_MT7530.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_MT7610e.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MT7620a_V22SG.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
mt7620n.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
MT7621.dts ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
mt7621.dtsi ramips: fix some clocks in mt7621.dtsi 2018-11-26 12:13:52 +01:00
MT7628.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
mt7628an.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
MZK-750DHP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-DP150N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX300NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-EX750NP.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-W300NH2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
MZK-WDPR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NA930.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NBG-419N2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NCS601W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Newifi-D2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
NIXCORE.dtsi ramips: fix whitespace and comment issues in dts 2018-08-04 08:39:35 +02:00
NW718.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OMEGA2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
OMEGA2P.dts ramips: fix Omega2 compatible string 2017-12-29 22:32:34 +01:00
OY-0001.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PBR-D1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PBR-M1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1208.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PSG1218A.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
PSG1218B.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
PSR-680W.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PWH2004.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
PX-4885.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
R6120.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
R6220.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RB750Gr3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RBM11G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RBM33G.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
RE350.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RE6500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RP-N53.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-AC51U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-G32-B1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N10-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N12-PLUS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N13U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N14U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N15.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RT-N56U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
rt2880.dtsi ramips: rt2880: fix pci cells definition 2018-11-26 15:54:22 +01:00
rt3050.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
rt3352.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
rt3883.dtsi ramips: revert fix rt3883 pci pinmux 2018-11-26 15:54:22 +01:00
rt5350.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
RT5350F-OLINUXINO-EVB.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dts ramips: introduce RT5350F-OLINUXINO.dtsi 2017-09-28 09:20:36 +02:00
RT5350F-OLINUXINO.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
RUT5XX.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SAP-G3200U3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SK-WB8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
SKW92A.dts ramips: improve Skylab SKW92A support 2018-11-26 15:54:22 +01:00
SL-R7205.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-638APB-V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-691GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-692GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TEW-714TRU.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Timecloud.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TINY-AC.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-MR3020V3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-MR3420V5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WA801NDV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV4.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR840NV5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
TL-WR841NV13.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR842NV5.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TL-WR902ACV3.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
TPLINK-8M.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U25AWF-H1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U35WF.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-256M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7621-06-512M-64M.dts ramips: add support for UniElec U7621-06-512M-64M variant 2018-11-28 01:11:38 +01:00
U7621-06.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
U7628-01-128M-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
U7628-01.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
UBNT-ER-e50.dtsi ramips: move partitions into partition table node 2018-08-04 08:39:35 +02:00
UBNT-ERX-SFP.dts ramips: add missing soc compatibles to dts 2018-01-09 22:05:46 +01:00
UBNT-ERX.dts ramips: add support for Ubiquiti EdgeRouter X-SFP 2017-06-07 06:33:33 +02:00
UR-326N4G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
UR-336UN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V11STFE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
V22RW-2X2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VAR11N-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
VOCORE2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VOCORE2.dtsi ramips: backport MT7628 pinmux fixes 2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
VR500.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W06.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W150M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W306R_V20.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W502U.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
W2914NSV2.dts ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
W2914NSV2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WCR-1166DS.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WCR150GN.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WD03.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WE1026-5G.dtsi ramips: set usb led trigger via devicetree 2018-10-07 11:34:18 +02:00
WF-2881.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WHR-300HP2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-600D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-1166D.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WHR-G300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIDORA-NEO.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WITI-256M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI-512M.dts ramips: add support for mqmaker witi 512mb version 2018-05-07 18:54:23 +02:00
WITI.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZARD8800.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WIZFI630A.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-330N3G.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-341V3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-351.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WL-WN570HA1.dts ramips: add support for Wavlink WL-WN570HA1 2018-11-28 00:50:35 +01:00
WL-WN575A3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLI-TX4-AG300N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WLR-6000.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMDR-143N.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WMR-300.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-AX1167GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN-GX300GR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WN3000RPV3.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNCE2001.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WNDR3700V5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR512-3GN.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WR1200JS.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WR1201.dts ramips: add support for MTC Wireless Router WR1201 2018-11-30 00:20:28 +01:00
WR6202.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1167GHBK2-S.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRC-1900GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRC-2533GST.dts ramips: add support for ELECOM WRC-1900GST 2018-08-23 22:42:09 +02:00
WRH-300CR.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WRTNODE2P.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WRTNODE2R.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WSR-600.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WSR-1166.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WT1520-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT1520.dtsi ramips: fix dtc warnings 2018-08-04 08:39:35 +02:00
WT3020-4M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020-8M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
WT3020.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
WZR-AGL300NH.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X5.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
X8.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
XDXRN502J.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
Y1.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
Y1S.dts ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
YOUKU-YK1.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-APE522II.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-CPE102.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WA05.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-16M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826-32M.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE826.dtsi ramips: add support for indicating the boot state using multiple leds 2018-10-07 11:34:18 +02:00
ZBT-WE1226.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE1326.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE2026.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WE3526.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG2626.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WG3526-16M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526-32M.dts ramips: mt7621: add compatible strings 2017-07-29 09:24:32 +02:00
ZBT-WG3526.dtsi ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZBT-WR8305RT.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZL5900V2.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00
ZTE-Q7.dts ramips: specify "firmware" partition format 2018-11-29 13:15:44 +01:00