ramips: add support for ELECOM WRC-1900GST
ELECOM WRC-1900GST is a wireless router, based on Mediatek MT7621A. This is almost same as WRC-2533GST except wireless specs. Specifications: - SoC : MT7621A (four logical CPU cores) - RAM : 128MiB - ROM : 16MiB of SPI NOR-FLASH - wireless : 5GHz : 3T3R up to 1300Mbps/11ac with MT7615 2.4GHz : 3T3R up to 600Mbps/11n with MT7615 - Ethernet : 5 ports, all ports is capable of 1000base-T - Ether switch : MT7530 (MT7621A built-in) - LEDs : 4 LEDs - buttons : 2 buttons and 1 slide-switch - UART : header is on PCB, 57600bps Flash instruction using factory image: 1. Connect the computer to the LAN port of WRC-1900GST 2. Connect power cable to WRC-1900GST and turn on it 3. Access to "https://192.168.2.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click apply ("適用") button 5. Wait ~150 seconds to complete flashing Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
This commit is contained in:
parent
b8996ea08a
commit
ad10e71bec
6 changed files with 200 additions and 172 deletions
|
@ -239,6 +239,7 @@ ramips_setup_interfaces()
|
|||
dir-860l-b1|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
elecom,wrc-1900gst|\
|
||||
iodata,wn-ax1167gr|\
|
||||
iodata,wn-gx300gr)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
@ -480,6 +481,7 @@ ramips_setup_macs()
|
|||
;;
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
elecom,wrc-1900gst|\
|
||||
sk-wb8)
|
||||
wan_mac=$(mtd_get_mac_binary factory 57350)
|
||||
;;
|
||||
|
|
|
@ -56,6 +56,7 @@ platform_check_image() {
|
|||
e1700|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
elecom,wrc-2533gst|\
|
||||
elecom,wrc-1900gst|\
|
||||
esr-9753|\
|
||||
ew1200|\
|
||||
ex2700|\
|
||||
|
|
9
target/linux/ramips/dts/WRC-1900GST.dts
Normal file
9
target/linux/ramips/dts/WRC-1900GST.dts
Normal file
|
@ -0,0 +1,9 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "elecom_wrc-gst.dtsi"
|
||||
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-1900gst", "mediatek,mt7621-soc";
|
||||
model = "ELECOM WRC-1900GST";
|
||||
};
|
|
@ -1,179 +1,9 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
#include "elecom_wrc-gst.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-2533gst", "mediatek,mt7621-soc";
|
||||
model = "ELECOM WRC-2533GST";
|
||||
|
||||
aliases {
|
||||
led-status = &led_power_green;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "wrc-2533gst:green:power";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_blue {
|
||||
label = "wrc-2533gst:blue:power";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wrc-2533gst:red:wps";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_red {
|
||||
label = "wrc-2533gst:red:power";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
client {
|
||||
label = "client";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
extender {
|
||||
label = "extender";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "router";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xb00000>;
|
||||
};
|
||||
|
||||
partition@b50000 {
|
||||
label = "tm_pattern";
|
||||
reg = <0xb50000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ed0000 {
|
||||
label = "tm_key";
|
||||
reg = <0xed0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f50000 {
|
||||
label = "art_block";
|
||||
reg = <0xf50000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "user_data";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart3", "jtag", "wdt", "sdhci";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
/* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
176
target/linux/ramips/dts/elecom_wrc-gst.dtsi
Normal file
176
target/linux/ramips/dts/elecom_wrc-gst.dtsi
Normal file
|
@ -0,0 +1,176 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-status = &led_power_green;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "wrc-gst:green:power";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_blue {
|
||||
label = "wrc-gst:blue:power";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wrc-gst:red:wps";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_red {
|
||||
label = "wrc-gst:red:power";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
client {
|
||||
label = "client";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
ap {
|
||||
label = "ap";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
extender {
|
||||
label = "extender";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "router";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xb00000>;
|
||||
};
|
||||
|
||||
partition@b50000 {
|
||||
label = "tm_pattern";
|
||||
reg = <0xb50000 0x380000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ed0000 {
|
||||
label = "tm_key";
|
||||
reg = <0xed0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f50000 {
|
||||
label = "art_block";
|
||||
reg = <0xf50000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "user_data";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart3", "jtag", "wdt", "sdhci";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
/* WRC-xxxxGST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
|
@ -127,6 +127,16 @@ define Device/elecom_wrc-2533gst
|
|||
endef
|
||||
TARGET_DEVICES += elecom_wrc-2533gst
|
||||
|
||||
define Device/elecom_wrc-1900gst
|
||||
DTS := WRC-1900GST
|
||||
IMAGE_SIZE := 11264k
|
||||
DEVICE_TITLE := ELECOM WRC-1900GST
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
|
||||
elecom-gst-factory WRC-1900GST 0.00
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-1900gst
|
||||
|
||||
define Device/ew1200
|
||||
DTS := EW1200
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
|
Loading…
Reference in a new issue