ramips: add support for Wavlink WL-WN570HA1
This commit adds support for the Wavlink WL-WN570HA1, a dual-band PoE wireless router with the following specifications: - CPU: MediaTek MT7688AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 1x 10/100Mbps - 2.4 GHz: 802.11b/g/n SoC, 1T1R, 27 dBm - 5 GHz: 802.11a/n/ac MT7610E, 1T1R, 25 dBm - Antennas: 2x external (1 per radio), detachable - LEDs: 3 programmable + Wi-Fi, WAN/LAN, Power - Buttons: Reset Flashing instructions: Factory U-boot launches a TFTP client if reset button is pressed during power-on. Rename the sysupgrade file and configure TFTP as follows: - Client (WL-WN570HA1) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au> [use generic board detection, add firmware partition compatible] Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Thomas Vincent-Cross
Mathias Kresin
parent
31469aebd4
commit
a160f50d4f
5 changed files with 154 additions and 0 deletions
|
|
@ -370,6 +370,14 @@ vocore-16M)
|
|||
w502u)
|
||||
set_wifi_led "rt2800pci-phy0::radio"
|
||||
;;
|
||||
wavlink,wl-wn570ha1)
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
|
||||
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
|
||||
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
|
||||
set_wifi_led "$boardname:green:wifi"
|
||||
;;
|
||||
we1026-5g-16m)
|
||||
ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
|
||||
set_wifi_led "we1026-5g:green:wifi"
|
||||
|
|
|
|||
|
|
@ -117,6 +117,7 @@ ramips_setup_interfaces()
|
|||
sk-wb8|\
|
||||
u7621-06-256M-16M|\
|
||||
vr500|\
|
||||
wavlink,wl-wn570ha1|\
|
||||
wf-2881|\
|
||||
whr-g300n|\
|
||||
mqmaker,witi-256m|\
|
||||
|
|
|
|||
|
|
@ -178,6 +178,7 @@ platform_check_image() {
|
|||
w306r-v20|\
|
||||
w502u|\
|
||||
ravpower,wd03|\
|
||||
wavlink,wl-wn570ha1|\
|
||||
wf-2881|\
|
||||
whr-1166d|\
|
||||
whr-300hp2|\
|
||||
|
|
|
|||
136
target/linux/ramips/dts/WL-WN570HA1.dts
Normal file
136
target/linux/ramips/dts/WL-WN570HA1.dts
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc";
|
||||
model = "Wavlink WL-WN570HA1";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "wl-wn570ha1:green:power";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "wl-wn570ha1:green:wan";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-high {
|
||||
label = "wl-wn570ha1:green:wifi-high";
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-med {
|
||||
label = "wl-wn570ha1:green:wifi-med";
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-low {
|
||||
label = "wl-wn570ha1:green:wifi-low";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "wl-wn570ha1:green:wifi";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x2e>;
|
||||
mediatek,portmap = "llllw";
|
||||
};
|
||||
|
|
@ -321,6 +321,14 @@ define Device/vocore2lite
|
|||
endef
|
||||
TARGET_DEVICES += vocore2lite
|
||||
|
||||
define Device/wavlink_wl-wn570ha1
|
||||
DTS := WL-WN570HA1
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
||||
DEVICE_TITLE := Wavlink WL-WN570HA1
|
||||
DEVICE_PACKAGES := kmod-mt76x0e
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn570ha1
|
||||
|
||||
define Device/wcr-1166ds
|
||||
DTS := WCR-1166DS
|
||||
BUFFALO_TAG_PLATFORM := MTK
|
||||
|
|
|
|||
Loading…
Reference in a new issue