openwrtv4

Author	SHA1	Message	Date
Hauke Mehrtens	2c34e1aba5	brcm47xx: use bcm47xx_board_get() and detect some more boards in flash partition driver SVN-Revision: 35791	2013-02-25 20:56:37 +00:00
Hauke Mehrtens	5d3b728372	brcm47xx: board detection WNDR3400v2 WNDR3400v2 is based on BCM53xx . Image that is created breaks the router somehow therefore "#". CFE and NVRAM contain different vars - example: CFE line original: Device eth0: hwaddr 74-44-01-37-C6-69, ipaddr 192.168.1.1, mask 255.255.255.0 CFE after openwrt: Device eth0: hwaddr 00-FF-FF-FF-FF-FF, ipaddr 192.168.1.1, mask 255.255.255.0 Logs were posted earlier on this mailing list: https://lists.openwrt.org/pipermail/openwrt-devel/2012-July/016174.html Different logs with factory firmware are in the wiki: http://wiki.openwrt.org/toh/netgear/wndr3400#wndr3400v2 (and on wikidevi for example) Signed off by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 35790	2013-02-25 20:55:46 +00:00
Gabor Juhos	f7879cd8d8	ar71xx: add profile and build image fot the TL-WA830RE v1 board Added support for the TP-LINK TL-WA830RE v1 Range Extender. Based on the WA901ND v1 support. Hardware IDs checked against original firmware. Patch was successfully tested on hardware. Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35789	2013-02-25 20:37:35 +00:00
Gabor Juhos	ea71239d8a	ar71xx: add model detection for the TL-WA830RE board Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35788	2013-02-25 20:37:33 +00:00
Hauke Mehrtens	0f2fc0adfd	brcm47xx: use same board detection code as kernel 3.8 SVN-Revision: 35770	2013-02-24 18:10:42 +00:00
Gabor Juhos	05de472518	adm5120: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35769	2013-02-24 18:08:14 +00:00
Gabor Juhos	3d65d0291c	adm5120: remove __dev{init,exit} annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35768	2013-02-24 18:08:03 +00:00
Gabor Juhos	0ab5ab2c08	adm5120: remove a superfluous patch The NO_IRQ symbol is not used by the amba core since upstream commit: dfb85185bda373a70409c70c2632b02fb0f8f449 AMBA: get rid of last two uses of NO_IRQ This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35748	2013-02-22 16:01:19 +00:00
Gabor Juhos	6419ffd20d	adm5120: avoid warning caused by wrong AMBA irq values The amba core throws a warning if -1 is used as an irq value since upstream commit: 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3 ARM: amba: make use of -1 IRQs warn Make the core warn about the use of -1 (NO_IRQ) Cange the value of the unused IRQs to zero for the UART devices to get rid of the warning. Based on #12729. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35747	2013-02-22 16:01:17 +00:00
Gabor Juhos	42cdd3bef4	cns21xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35737	2013-02-21 20:45:24 +00:00
Gabor Juhos	9ec9adf3ea	mpc83xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35736	2013-02-21 20:39:22 +00:00
Gabor Juhos	c50881d7ba	ppc44x: add support for 3.8 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35735	2013-02-21 19:23:31 +00:00
Gabor Juhos	fd645abca4	ppc40x: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35734	2013-02-21 19:23:29 +00:00
Gabor Juhos	4da13625d5	mpc85xx: add user-space support for the TL-WDR4900 v1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35733	2013-02-21 19:20:34 +00:00
Gabor Juhos	bd2c77b264	mpc85xx: update 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35732	2013-02-21 18:44:40 +00:00
Gabor Juhos	bcac3c5569	ar71xx: fix MAC address assignment on the DIR-825-Bx boards Use the same MAC addresses as the original firmware. Based on a patch from #10421. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Gabor Varga <vargagab@gmail.com> SVN-Revision: 35730	2013-02-21 17:58:21 +00:00
Gabor Juhos	d785803bfa	mpc85xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35729	2013-02-21 17:48:31 +00:00
Gabor Juhos	cf2324fd6b	ar71xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35728	2013-02-21 17:47:15 +00:00
Gabor Juhos	9cc3a60b5a	atheros: add support for linux kernel v3.8 This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35727	2013-02-21 17:45:54 +00:00
Gabor Juhos	babd5aa2fc	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35726	2013-02-21 16:52:34 +00:00
Jonas Gorski	ff20c0e1fc	bcm63xx: Fix sysupgrade for tag-version 7 and 8 Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724	2013-02-21 11:45:41 +00:00
Jonas Gorski	3010a0b616	generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLAN Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723	2013-02-21 11:45:38 +00:00
Jonas Gorski	23e71c56ba	generic: b53: remove empty spaces Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722	2013-02-21 11:45:36 +00:00
Jonas Gorski	1cd62d06ca	ramips: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721	2013-02-21 11:45:33 +00:00
Jonas Gorski	a0956a88d4	cns21xx: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35720	2013-02-21 11:45:31 +00:00
Jonas Gorski	b91eab631b	ar71xx: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35719	2013-02-21 11:45:29 +00:00
Gabor Juhos	fad3fc1ad0	mpc85xx: add kmod-leds-gpio to the default packages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35708	2013-02-21 10:26:03 +00:00
Gabor Juhos	c837cae29c	mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35707	2013-02-21 10:26:00 +00:00
Hauke Mehrtens	9afdb046d3	brcm47xx: do not use vlan0 any more. The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704	2013-02-20 15:31:43 +00:00
Gabor Juhos	4305c6cda1	mpc85xx: add kernel support for the TL-WDR4900 v1 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35690	2013-02-20 08:27:27 +00:00
Gabor Juhos	33ba984628	mpc85xx: use a foreach loop to copy boot images Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35689	2013-02-20 08:27:26 +00:00
Gabor Juhos	4341b11f3e	ar71xx: remove __dev{init,exit} annotations from kernel files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35687	2013-02-19 20:52:06 +00:00
Gabor Juhos	7d0d29ab6e	linux/3.8: add missing Kconfig symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35686	2013-02-19 20:52:03 +00:00
Gabor Juhos	76b797c759	mpc85xx: add default profile Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35677	2013-02-19 14:53:17 +00:00
Gabor Juhos	debb9a4a97	mpc85xx: add gpio-keys to OF match table Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35676	2013-02-19 14:53:16 +00:00
Gabor Juhos	69cc70a43c	mpc85xx: enable squashfs feature Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35675	2013-02-19 14:53:15 +00:00
Gabor Juhos	ae9100e969	mpc85xx: add swconfig to default packages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35674	2013-02-19 14:53:12 +00:00
Gabor Juhos	ed0f43f1e2	kernel: update linux 3.8-rcX to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35672	2013-02-19 09:17:38 +00:00
Florian Fainelli	1dd9e661be	x86/rdc: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35664	2013-02-18 10:38:05 +00:00
Florian Fainelli	677714309b	rb532: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35663	2013-02-18 10:38:02 +00:00
Florian Fainelli	2bfa1ed82c	cobalt: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35662	2013-02-18 10:37:58 +00:00
Florian Fainelli	d7092aceb8	brcm63xx: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661	2013-02-18 10:37:55 +00:00
Florian Fainelli	5953e79888	au1000: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35660	2013-02-18 10:37:52 +00:00
Florian Fainelli	15b66e0cbe	ar7: migrate to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35659	2013-02-18 10:37:43 +00:00
Gabor Juhos	90011a99f3	ramips: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652	2013-02-18 09:56:29 +00:00
Gabor Juhos	32b41c4dd0	cns21xx: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35651	2013-02-18 09:56:28 +00:00
Gabor Juhos	f6691c09c1	ar71xx: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35650	2013-02-18 09:56:27 +00:00
Gabor Juhos	546b336d2d	adm5120: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35649	2013-02-18 09:56:26 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Gabor Juhos	451dd745bd	generic: ar8216: cleanup function/variable names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35642	2013-02-17 12:48:25 +00:00
Gabor Juhos	51996304c4	generic: ar8216: rename struct ar8216_priv to ar8xxx_priv Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35641	2013-02-17 12:48:23 +00:00
Gabor Juhos	4215b1c93c	ar71xx: add user-space support for the Mikrotik RB951G board [juhosg: change rb-951g to rb-951g-2hnd in the scripts] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35634	2013-02-17 10:08:41 +00:00
Gabor Juhos	7a709573d7	ar71xx: add kernel support for the Mikrotik RB951G board This is platform definition for the RB951G device. It's mostly rework of RB2011UAS patchset with network taken from the RB751 patches. The main difference is the flash layout used by this device. [juhosg: - remove dead code from mach-rb951g - add "-2HnD" suffix to the machine name - use a separate 615-MIPS-ath79-RB951G-support.patch] Patchwork: http://patchwork.openwrt.org/patch/3257/ Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35633	2013-02-17 10:08:35 +00:00
Hauke Mehrtens	1a8218d6e4	brcm47xx: add initial support for kernel 3.8 This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. SVN-Revision: 35632	2013-02-16 20:28:24 +00:00
Gabor Juhos	17c36f540c	ar71xx: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35629	2013-02-16 17:33:06 +00:00
Gabor Juhos	4375dae6d3	ramips: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35628	2013-02-16 17:26:52 +00:00
Gabor Juhos	62e80eba31	mpc85xx: add input drivers to default packages, and load those during preinit Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35626	2013-02-16 17:13:38 +00:00
Hauke Mehrtens	ce6a7543fe	brcm47xx: BGMAC - Adjust AutoLoad number to be prior to switch modules Adjust the "AutoLoad" number for the BGMAC module to be prior to the switch modules. This probably isn't real important as the modules are loaded in the correct order by preinit anyway. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35625	2013-02-16 16:27:33 +00:00
Hauke Mehrtens	9de704a03b	brcm47xx: improve cpuport detection for filesafe Do not try to load bcm57xx.ko any more this is not needed for kernel 2.6 and 3.X Ask the switch driver where the CPU port is. SVN-Revision: 35624	2013-02-16 16:24:15 +00:00
Hauke Mehrtens	92d16f38d7	brcm47xx: fix network config on simpleshare The included patch will generate a correct network configuration on the simpletech simpleshare. Thank you for the patch Will Holmes (RealOpty) This closes #12361. SVN-Revision: 35623	2013-02-16 15:24:48 +00:00
Hauke Mehrtens	a21ba013f5	brcm47xx: handle return values of cfe_env_get() correctly. This closes #12746. SVN-Revision: 35622	2013-02-16 15:19:24 +00:00
Hauke Mehrtens	283bff02a2	brcm47xx: bgmac: fix unaligned accesses to network headers. SVN-Revision: 35621	2013-02-16 14:38:17 +00:00
Hauke Mehrtens	5fed2916c3	brcm47xx: fix unaligned access to mac address The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. This closes #9824. SVN-Revision: 35618	2013-02-16 13:46:00 +00:00
Hauke Mehrtens	d9580d224a	brcm47xx: try to automatically detect if the wan port is at port 4 and not at port 0. This should fix #13000. SVN-Revision: 35617	2013-02-16 12:37:24 +00:00
Gabor Juhos	7f20c2e19a	update x86 generic to kernel v3.7 Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35616	2013-02-16 12:12:52 +00:00
Gabor Juhos	7fd8525853	ramips: use the new macaddr_* helpers instead of maccalc Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35615	2013-02-16 11:50:25 +00:00
Gabor Juhos	753d713e92	ramips: use the mtd_get_mac_* helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35613	2013-02-16 11:50:21 +00:00
Jonas Gorski	dd77663fb0	kernel: add missing config options r35336 exposed PTP, which has additional drivers on ixp4xx, causing it to not build with PTP enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35611	2013-02-16 11:39:45 +00:00
Jonas Gorski	485e52e1d8	bcm63xx: make nvram checksum failures non fatal fixes #12982. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35605	2013-02-15 12:23:49 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	f35c369710	generic: ar8216: move PHY4 RGMII workaround code out of the loop Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35603	2013-02-14 14:55:40 +00:00
Gabor Juhos	d64888ffc0	generic: ar8216: register the switch from the probe routine Currently the switch gets registered when an ethernet driver connects to a PHY of the switch. This method does not work with the ethernet drivers which are connecting to the PHY from their ndo_open callback. With those ethernet drivers, the driver tries to register the switch each time when the etherned device is opened and this causes a deadlock. Move the switch registration into the probe routine to fix this problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35602	2013-02-14 14:01:24 +00:00
Florian Fainelli	31dc805f88	x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH) Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35601	2013-02-14 13:00:07 +00:00
Hauke Mehrtens	c0f6c75cf7	brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" SVN-Revision: 35597	2013-02-14 12:38:16 +00:00
Gabor Juhos	9d86ba2ed4	mpc85xx: enable swconfig and the ar8216 driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35592	2013-02-13 16:51:23 +00:00
Gabor Juhos	6d18518e02	mpc85xx: enable the squashfs driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35591	2013-02-13 16:51:21 +00:00
Gabor Juhos	c3b3f77621	mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support Squashfs is unable to decompress some blocks without that: [ 199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt [ 199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26 [ 199.508016] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.521311] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8 [ 199.534594] SQUASHFS error: Unable to read data cache entry [bff26] [ 199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35590	2013-02-13 16:51:19 +00:00
Gabor Juhos	7484006498	ar71xx: fix factory image creation for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35589	2013-02-13 16:36:26 +00:00
Gabor Juhos	5f10ec3c36	ar71xx: fix switch-config for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35588	2013-02-13 16:36:23 +00:00
Hauke Mehrtens	54ca3eed5d	brcm47xx: configure vlan correctly on some recent devices. SVN-Revision: 35587	2013-02-13 16:05:52 +00:00
Hauke Mehrtens	4663d424a3	brcm47xx: add some more fixes to bgmac Thank you Rafał Miłecki and Nathan Hintz SVN-Revision: 35574	2013-02-12 20:10:38 +00:00
Hauke Mehrtens	7c0208b336	brcm47xx: update tg3 to the version send upstream SVN-Revision: 35573	2013-02-12 20:09:15 +00:00
Luka Perkov	7973ef64d6	mvebu: remove boards suffix SVN-Revision: 35572	2013-02-12 10:18:53 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	1f9ede9cfc	ar71xx: add script for automatic switch name migration Thanks to Jonas Gorski for the help. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35567	2013-02-11 21:41:16 +00:00
Felix Fietkau	2e7a4b088d	ar71xx: allow unknown multicast frames to pass to the CPU on AR934x SVN-Revision: 35564	2013-02-11 18:59:05 +00:00
Gabor Juhos	9525a075c1	ar8216: remove superfluous code from ar8216_config_init Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35562	2013-02-11 16:57:31 +00:00
Gabor Juhos	94806a13af	ar71xx: use switchX names in network configuration Accessing the AR8xxx switches via the name of the attached ethernet device is not possible since r35560. Change the uci-defaults script to use switchX names in switch configurations. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35561	2013-02-11 16:54:52 +00:00
Gabor Juhos	9c86d268eb	generic: ar8216: don't use ethernet device name in register_switch The switches are accessed via an MDIO bus. Set the alias to the name of the MDIO bus, and show that in the message along with the name of the switch switch device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35560	2013-02-11 16:11:31 +00:00
Gabor Juhos	3f3eba88f6	generic: ar8216: reuse the private data from ar8216_probe The private data of the switch is already allocated in ar8216_priv, assign that to each PHY on the same MDIO bus. Also remove the redundant code from ar8216_config_init. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35559	2013-02-11 16:11:30 +00:00
Gabor Juhos	1afb759b35	generic: ar8216: use phydev instead of pdev everywhere Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35555	2013-02-11 13:25:43 +00:00
Gabor Juhos	0b1fe07e8e	generic: ar8216: use pr_* macros for kernel messages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35554	2013-02-11 13:14:00 +00:00
Gabor Juhos	eea297884e	generic: ar8216: fix PHY features setup Sujith says: This commit breaks the WAN port on my AP96 - DHCP fails. Reverting it fixes the issue. commit b67cc3a0cdd02973610d4d5a63226d1c44841e94 Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Fri Feb 8 09:13:18 2013 +0000 generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73 This change restores the previous behaviour and moves the code into the ar8216_probe function. Reported-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Tested-by: Sujith Manoharan <sujith@msujith.org> SVN-Revision: 35549	2013-02-11 10:05:35 +00:00
Gabor Juhos	617076c613	generic: ar8216: add ar8xxx_probe_switch helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35547	2013-02-10 19:02:01 +00:00
Gabor Juhos	98b13e39ac	generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35546	2013-02-10 18:42:08 +00:00
Gabor Juhos	f97170a720	generic: ar8216: free mib counters from ar8xxx_free Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35545	2013-02-10 18:42:07 +00:00
Gabor Juhos	7924e517af	generic: ar8216: add ar8xxx_free helper Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35544	2013-02-10 18:42:05 +00:00
Gabor Juhos	77b3c551c4	generic: ar8216: add ar8xxx_create{,mii} helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35543	2013-02-10 18:42:04 +00:00
Gabor Juhos	5f70b1db2a	generic: ar8216: remove redundant phy address check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35542	2013-02-10 18:38:12 +00:00
Gabor Juhos	14fd37258b	generic: ar8216: only set phy_ptr if packet mangling is used Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35541	2013-02-10 18:38:10 +00:00
Gabor Juhos	393163b098	generic: ar8216: add defines for the AR8316 POSTRIP register Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35539	2013-02-10 13:18:48 +00:00
Gabor Juhos	5ed480598d	generic: ar8216: don't probe the chip multiple times It is only needed when the private data is allocated. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35538	2013-02-10 13:05:15 +00:00
Gabor Juhos	774da6c7a4	generic: ar8216: add sanity check to ar8216_probe Verify that the mdio bus has PHY devices with a supported PHY ID at address 0-4. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35537	2013-02-10 13:05:14 +00:00
Gabor Juhos	4720c75cf7	generic: ar8216: skip probe on unused PHY addresses Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35536	2013-02-10 13:05:12 +00:00
Jonas Gorski	f07a33afc2	ar71xx: register the micro sd card reader on RB493G Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35535	2013-02-10 12:31:38 +00:00
Jonas Gorski	eedc3554fe	generic: b53: fix reverted error check in probe b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534	2013-02-10 12:31:36 +00:00
Jonas Gorski	200359a520	bcm63xx: handle huawei nvram layout Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533	2013-02-10 12:31:31 +00:00
Gabor Juhos	de123c4409	generic: ar8216: move sleep out of the loop It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532	2013-02-09 13:26:04 +00:00
Gabor Juhos	6ff973bdda	ar71xx: Routerboard 751 Mac Address Offset Fix We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519	2013-02-08 09:34:53 +00:00
Gabor Juhos	aa04441904	generic: ar8216: simplify phy features setup Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518	2013-02-08 09:13:18 +00:00
Gabor Juhos	9c1f95a416	generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517	2013-02-08 09:13:14 +00:00
Gabor Juhos	5393efc0c7	generic: ar8216: use inline function to convert swdev to ar8216 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514	2013-02-07 15:18:36 +00:00
Gabor Juhos	b87a1c757d	generic: ar8216: add mii_bus field to struct ar8216_priv Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513	2013-02-07 15:18:35 +00:00
Gabor Juhos	c130a3feac	generic: mvswitch: add detach callback Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512	2013-02-07 15:18:34 +00:00
Gabor Juhos	4be8c22e74	generic: ar8216: add detach callback The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511	2013-02-07 15:18:32 +00:00
Gabor Juhos	fe61fc2d7d	generic: add detach callback to struct phy_driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510	2013-02-07 15:18:24 +00:00
Hauke Mehrtens	07db9e8eab	brcm47xx: fix name of kmod-ocf-ubsec-ssb This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509	2013-02-06 22:51:25 +00:00
Hauke Mehrtens	a52832164b	brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up This fixes #12927. SVN-Revision: 35507	2013-02-06 14:57:00 +00:00
Florian Fainelli	6b0da6db6a	remove support for 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506	2013-02-05 22:36:54 +00:00
Florian Fainelli	e22926a46b	make default version 3.7.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505	2013-02-05 22:36:50 +00:00
Florian Fainelli	57803a98ec	remove superfluous calls to /lib/brcm63xx.sh The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504	2013-02-05 22:25:30 +00:00
Florian Fainelli	84d306d23c	remove references to the old switch driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503	2013-02-05 22:25:19 +00:00
Mirko Vogt	ec19a23bae	fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W SVN-Revision: 35501	2013-02-05 14:57:43 +00:00
Mirko Vogt	f460388ce2	add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500	2013-02-05 14:57:40 +00:00
Gabor Juhos	395d0bdc1f	generic: ar8216: clear driver specific data pointer in phy_device This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497	2013-02-05 08:39:26 +00:00
Gabor Juhos	2e7f38c243	generic: ar8216: unregister switch on error path Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496	2013-02-05 08:39:24 +00:00
Gabor Juhos	1bb8ad6050	mpc85xx: enable GPIO sysfs interface Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35495	2013-02-05 07:48:02 +00:00
Gabor Juhos	6ba265a573	mpc85xx: enable Freescale eSPI driver and m25p80 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35494	2013-02-05 07:48:01 +00:00
Gabor Juhos	eea43ffd33	mpc85xx: sync kernel config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35493	2013-02-05 07:47:59 +00:00
Hauke Mehrtens	8ba8225686	brcm47xx: fix detection of Asus RT-N16 This fixes #12936. SVN-Revision: 35492	2013-02-04 22:49:05 +00:00
Hauke Mehrtens	a1e3c0ca46	Add Failsafe support for Linksys E3000V1 / WRT610NV2 Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491	2013-02-04 22:40:57 +00:00
Hauke Mehrtens	c2198aba32	brcm47xx: Fix switch config on 4716/53115 devices Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490	2013-02-04 22:38:37 +00:00
Gabor Juhos	b97aee1ee8	coldfire: R.I.P. The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35489	2013-02-04 15:23:10 +00:00
Gabor Juhos	c41002971a	leon: R.I.P. It is broken since ~9 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35488	2013-02-04 15:23:08 +00:00
Gabor Juhos	539e0b5b84	imx21: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35487	2013-02-04 15:23:07 +00:00
Gabor Juhos	e7dee4ea87	octeon: R.I.P. It is broken since ~8 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35486	2013-02-04 15:23:05 +00:00
Gabor Juhos	da44b916cf	omap35xx: R.I.P. It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35485	2013-02-04 15:23:04 +00:00
Jonas Gorski	8506964e6d	bcm63xx: add support for linux 3.8 Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482	2013-02-04 10:19:55 +00:00
Jonas Gorski	3b4fced67d	bcm63xx: add support for linux 3.7 Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481	2013-02-04 10:19:50 +00:00
Jonas Gorski	0e9365b346	kernel: generic: update the ehci overcurrent patch to upstream submission Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35480	2013-02-04 10:19:37 +00:00
Jonas Gorski	e0fe5596f8	kernel: generic: add back the patch exporting bcm63xx tag header It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35479	2013-02-04 10:19:35 +00:00
Jonas Gorski	34ad8f4e75	kernel: generic: update to 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35478	2013-02-04 10:19:28 +00:00
Jonas Gorski	a15e1a950d	bcm63xx: refresh 3.6 patches Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477	2013-02-04 10:19:24 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	b1168e70d3	ar71xx: use backported PCI_MEM_SIZE patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35470	2013-02-02 18:17:58 +00:00
Gabor Juhos	b9b341f05a	ar71xx: rename ar933x_uart patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35469	2013-02-02 18:17:53 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	4ac6eb480b	x86/kvm_guest: add support for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35460	2013-02-02 15:31:57 +00:00
Gabor Juhos	c340ef2ae2	x86: add missing symbols for 3.7 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35459	2013-02-02 15:31:55 +00:00
Gabor Juhos	0f46f47512	x86/kvm_guest: add missing symbols for 3.3 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35458	2013-02-02 15:31:54 +00:00
Gabor Juhos	ab3e3cacaa	alix2: convert from kernel version 3.3.8 to 3.7.5 [juhosg: use 3.7.5 instead of 3.7.3] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35457	2013-02-02 15:31:52 +00:00
Gabor Juhos	4c223d7d4f	generic: convert crypto-ocf from kernel_thread to kthread recent kernels have finally stopped exporting kernel_thread, since a deprecation circa 2006. This patch attempts to convert to the newer kernel kthread API, particularly in random.c [juhosg: remove randomproc variable, it is not required after the patch] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35456	2013-02-02 15:31:44 +00:00
Gabor Juhos	7c87d28054	ar71xx: fixes whitespaces for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35455	2013-02-02 15:02:19 +00:00
Gabor Juhos	ecf55822bb	mpc85xx: nuke 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35453	2013-02-02 10:05:43 +00:00
Gabor Juhos	242859abae	mpc85xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35452	2013-02-02 10:05:40 +00:00
Gabor Juhos	cde71c305c	mpc85xx: add support for linux 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35451	2013-02-02 10:05:37 +00:00
Gabor Juhos	bbfd8cbf94	linux/3.7: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35450	2013-02-02 10:05:08 +00:00
Gabor Juhos	9a438b2271	ar71xx: build images for the TP-LINK TL-WR743ND v2 AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35449	2013-02-02 10:01:15 +00:00
Gabor Juhos	668e529220	generic: fix gc_sections patch Due to the patch, essential '.data..' sections are merged into the '.data' section: --- vmlinux.good.sect 2013-02-01 23:49:16.000000000 +0100 +++ vmlinux.bad.sect 2013-02-01 23:49:02.000000000 +0100 @@ -1,5 +1,5 @@ -vmlinux.good: file format elf32-powerpc +vmlinux.bad: file format elf32-powerpc Sections: Idx Name Size VMA LMA File off Algn @@ -53,43 +53,35 @@ CONTENTS, ALLOC, LOAD, READONLY, DATA 24 .machine.desc 00000460 c04e1000 004e1000 004f1000 22 CONTENTS, ALLOC, LOAD, DATA - 25 .data 0000f6a0 c04e2000 004e2000 004f2000 212 + 25 .data 0001635c c04e2000 004e2000 004f2000 212 CONTENTS, ALLOC, LOAD, DATA - 26 .data..init_task 00002000 c04f2000 004f2000 00502000 23 - CONTENTS, ALLOC, LOAD, DATA - 27 .data..page_aligned 00002000 c04f4000 004f4000 00504000 212 - CONTENTS, ALLOC, LOAD, DATA - 28 .data..cacheline_aligned 00000c00 c04f6000 004f6000 00506000 25 - CONTENTS, ALLOC, LOAD, DATA - 29 .data..read_mostly 000015e0 c04f6c00 004f6c00 00506c00 23 - CONTENTS, ALLOC, LOAD, DATA - 30 .sbss 000002e0 c04f9000 004f9000 005081e0 23 + 26 .sbss 000002e0 c04fa000 004fa000 0050835c 23 <...> This causes boot hang on powerpc. Modify the patch to ensure that the kernel specific '.data..' sections remain separate. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35447	2013-02-02 09:30:47 +00:00
Gabor Juhos	31af0dc186	ar71xx: fix mac address calculation on the OpenMesh MR600 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35446	2013-02-02 08:47:41 +00:00
Gabor Juhos	257b21f2d4	mpc85xx: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35445	2013-02-01 17:49:56 +00:00
Gabor Juhos	cf2faab4ae	mpc85xx: switch to 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35444	2013-02-01 17:49:54 +00:00
Gabor Juhos	56849d146c	mpc85xx: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35443	2013-02-01 17:49:53 +00:00
Gabor Juhos	630fffbead	mpc85xx: fix dts name for P1010RDB Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35442	2013-02-01 17:49:52 +00:00
Gabor Juhos	a2529eab2b	linux/3.6: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35441	2013-02-01 17:30:18 +00:00
Gabor Juhos	fb936218a1	linux/3.6: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35440	2013-02-01 17:30:15 +00:00
Gabor Juhos	495820f7a0	mpc85xx: remove broken flag Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35439	2013-02-01 17:28:54 +00:00
Gabor Juhos	4cb7e749ab	mpc85xx: build fdt file for the PB1010RDB board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35438	2013-02-01 17:28:51 +00:00
Gabor Juhos	20ca35570e	mpc85xx: enable PB1010RDB support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35437	2013-02-01 17:28:49 +00:00
Gabor Juhos	21b15ddda5	mpc85xx: image: fix building of multiple dtb files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35436	2013-02-01 17:28:47 +00:00
Gabor Juhos	d158dfc607	linux/3.3: disable crashlog on PPC It causes NULL pointer dereference: [ 0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c [ 0.644090] Unable to handle kernel paging request for data at address 0x00000000 [ 0.651533] Faulting instruction address: 0xc025d620 [ 0.656483] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.661856] P1010 RDB [ 0.664113] Modules linked in: [ 0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38 [ 0.672101] REGS: c7831ef0 TRAP: 0300 Not tainted (3.3.8) [ 0.677740] MSR: 00029000 <CE,EE,ME> CR: 42022082 XER: 20000000 [ 0.683817] DEAR: 00000000, ESR: 00000000 [ 0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000 [ 0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff [ 0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000 [ 0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000 [ 0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824 [ 0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8 [ 0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8 [ 0.736503] Call Trace: [ 0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable) [ 0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198 [ 0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120 [ 0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68 [ 0.762022] Instruction dump: [ 0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0 [ 0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35435	2013-02-01 17:28:44 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	6805275fdc	ar71xx: sysupgrade - fix OpenMesh MR600 total flash size Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35433	2013-02-01 15:50:54 +00:00
Gabor Juhos	979676ffcc	ar71xx: add sysupgrade support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35430	2013-02-01 15:50:47 +00:00
Gabor Juhos	2af995ba1d	ar71xx: add user-space support for OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35429	2013-02-01 15:50:45 +00:00
Gabor Juhos	8837d3a49b	ar71xx: add kernel support for the OpenMesh MR600v2 Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35428	2013-02-01 15:50:42 +00:00
Gabor Juhos	150bb9d0b1	ar71xx: remove unused OpenMesh MR600 led definitions Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35427	2013-02-01 15:50:39 +00:00
Gabor Juhos	fe3db74276	ar71xx: remove unused OpenMesh MR6000 platform code Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35426	2013-02-01 15:50:37 +00:00
Gabor Juhos	492cbcdd6b	ar71xx: build image for the TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35425	2013-02-01 15:50:34 +00:00
Gabor Juhos	119dc460a3	ar71xx: add user-space support for TL-WDR3500 board Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35424	2013-02-01 15:50:32 +00:00
Gabor Juhos	5bd02ca895	ar71xx: add kernel support for the TL-WDR3500 board WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet, and has only 1 USB port. Pending issues: * Leds are not working at all (except power and wlan_5g) * LAN switch ethernet ports are reversed with respect to case label. [Label] -> soft device [LAN1] -> eth0.4 [LAN2] -> eth0.3 [LAN3] -> eth0.2 [LAN4] -> eth0.1 Based on http://patchwork.openwrt.org/patch/3208/ Thanks-to: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35423	2013-02-01 15:50:29 +00:00
Jonas Gorski	ce8b226046	bcm63xx: replace kmod-switch with swconfig in default package set Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35407	2013-01-30 00:19:21 +00:00
Gabor Juhos	f7ff677169	ar71xx: add profile and build image for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403	2013-01-29 22:50:57 +00:00
Gabor Juhos	2a5193308f	ar71xx: add user space support for dir-825-c1 [juhosg: fix whitespaces in some scripts] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35402	2013-01-29 22:50:54 +00:00
Gabor Juhos	800da21cb1	ar71xx: add kernel support for dir-825-c1 [juhosg: - remove unused GPIO stuff - use a separate kernel patch for machine integration] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35401	2013-01-29 22:50:50 +00:00
Gabor Juhos	5a2aa8f184	generic: fix default compression selection in ubifs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35398	2013-01-29 21:32:22 +00:00
Gabor Juhos	da9a704e92	ar71xx: add profile and generate images for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35397	2013-01-29 19:12:34 +00:00
Gabor Juhos	5d4ddbce72	ar71xx: add user-space support for the AP132 board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35396	2013-01-29 19:12:32 +00:00
Gabor Juhos	5ca187570f	ar71xx: add kernel support for Atheros AP132 Reference Board Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35395	2013-01-29 19:12:30 +00:00
Gabor Juhos	8a9d92f125	ar71xx: fix ethernet device registration for the QCA9556 SoC Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35394	2013-01-29 19:12:28 +00:00
Gabor Juhos	e9dbff1193	ar71xx: add kernel support for the QCA9556 SoC Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35393	2013-01-29 19:12:26 +00:00
Gabor Juhos	df15e5cd61	ar71xx: enable fast flash read on dual-flash devices This improves flash read speed on various Buffalo units. mtd_speedtest results on the WZR-HP-AG300H: old new delta eraseblock read speed: 726 KiB/s 2068 KiB/s +184.85% page read speed: 699 KiB/s 1973 KiB/s +182.26% 2 page read speed: 711 KiB/s 2043 KiB/s +187.34% Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35392	2013-01-29 19:12:25 +00:00
Gabor Juhos	562ba537fc	kernel: update linux 3.7 to 3.7.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35390	2013-01-29 18:29:45 +00:00
John Crispin	c6744513a3	fix mtd_mp25p80_add_gd25q32_gd25q64.patch SVN-Revision: 35378	2013-01-29 11:06:57 +00:00
Florian Fainelli	714b2cfef3	Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit. The patch was added to "linux/generic/patches-3.6" instead of "target/linux/generic/patches-3.6". I also fixed a missing patch space and refreshed generic patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35367	2013-01-29 09:46:11 +00:00
Gabor Juhos	e252a1492c	generic: fix build failure in MIPS kexec code if SMP is enabled Fix it for older kernels as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35366	2013-01-29 09:44:58 +00:00
Gabor Juhos	22ce389e6a	ar71xx: add TP-LINK WA-801ND to run-time model detection A small cosmetic fix to show the HW model name correctly in LuCI. Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35365	2013-01-29 09:40:29 +00:00
Gabor Juhos	1b3c6ad1fb	generic: fix build failure in MIPS kexec code if SMP is enabled Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35364	2013-01-29 09:40:23 +00:00
John Crispin	756a7c5451	fix for non-blinking LAN LEDs https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359	2013-01-28 18:06:31 +00:00
John Crispin	a0f7a3c214	dont load gptu on ase fixes #12792 SVN-Revision: 35357	2013-01-28 17:46:07 +00:00
John Crispin	d93706154b	ramips: reset switch on single-port devices Signed-off-by: Daniel Gole <dgolle@allnet.de> SVN-Revision: 35356	2013-01-28 17:44:41 +00:00
John Crispin	0de0955931	refresh patches SVN-Revision: 35355	2013-01-28 17:44:20 +00:00
John Crispin	0183df8ed9	Fix ARV7518 USB This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35354	2013-01-28 17:43:35 +00:00
John Crispin	3534757bb9	Add ath9k eeprom and pci fixup support Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35353	2013-01-28 17:43:25 +00:00
John Crispin	5eb43d4cf8	Add support for ARV4518PW R01 and rename R01A. There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35352	2013-01-28 17:42:59 +00:00
Felix Fietkau	1dc9c8ef69	kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed SVN-Revision: 35342	2013-01-27 23:23:39 +00:00
Hauke Mehrtens	68aeb7af8e	brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe. SVN-Revision: 35341	2013-01-27 21:48:28 +00:00
Hauke Mehrtens	a9175c90cf	kernel: b53: the b53 spi driver depends on spi SVN-Revision: 35340	2013-01-27 21:39:53 +00:00
Hauke Mehrtens	62554217fc	kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8 SVN-Revision: 35336	2013-01-27 21:18:52 +00:00
Felix Fietkau	8193bbe59a	netfilter: add support for flushing conntrack via /proc SVN-Revision: 35330	2013-01-27 19:02:38 +00:00
Felix Fietkau	156a6e7999	kernel: clean up crypto kconfig options on 3.8 SVN-Revision: 35329	2013-01-27 17:49:09 +00:00
Hauke Mehrtens	721bf97863	kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8 These attributes where removed with kernel 3.8 and are now causing compile errors. SVN-Revision: 35328	2013-01-27 17:48:48 +00:00
Felix Fietkau	ed7ca5d44e	kernel: clean up crypto related kconfig options SVN-Revision: 35327	2013-01-27 17:23:12 +00:00
Felix Fietkau	8a1091ad53	ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma SVN-Revision: 35326	2013-01-27 16:38:27 +00:00
Felix Fietkau	044c316167	kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run Reduces kernel size after LZMA by about 5k on MIPS SVN-Revision: 35325	2013-01-27 16:21:08 +00:00
Hauke Mehrtens	e083c7926b	brcm47xx: create image for Netgear WNDR3400 V1 SVN-Revision: 35323	2013-01-26 20:34:38 +00:00
Hauke Mehrtens	05623aebef	brcm47xx: add initial board detection code SVN-Revision: 35322	2013-01-26 20:34:00 +00:00
Hauke Mehrtens	a83d7bb109	brcm47xx: add gpio to irq function again SVN-Revision: 35321	2013-01-26 20:33:23 +00:00
Felix Fietkau	8933b918cd	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips in combination with kernel symbol export stripping this significantly reduces the kernel image size SVN-Revision: 35320	2013-01-26 16:26:13 +00:00
Gabor Juhos	15be1c9ee7	kernel: update linux 3.7 to 3.7.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35318	2013-01-24 17:08:37 +00:00
Florian Fainelli	680f460861	kernel: refresh 3.8 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35317	2013-01-24 17:04:52 +00:00
Florian Fainelli	9781461a3d	mvebu: update to 3.8-rc4 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35316	2013-01-24 17:04:46 +00:00
Hauke Mehrtens	4a69e20a10	kernel: add missing config options for 3.8 SVN-Revision: 35315	2013-01-24 14:48:15 +00:00
Hauke Mehrtens	76c12ff797	brcm47xx: change generic profiles The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. SVN-Revision: 35314	2013-01-24 14:38:10 +00:00
Felix Fietkau	b60fc82ce5	kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well SVN-Revision: 35310	2013-01-23 16:31:38 +00:00
Felix Fietkau	8ce8960959	ar71xx: sync kernel sizes where possible to fix images for some devices (#12874 ) SVN-Revision: 35309	2013-01-23 16:29:25 +00:00
Jonas Gorski	8411e5c06e	bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307	2013-01-23 10:12:40 +00:00
Jonas Gorski	17d51121a6	bcm63xx: expose the internal switch to b53 Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35306	2013-01-23 10:12:37 +00:00
Jonas Gorski	bb0118c66f	generic: add b53 swconfig switch driver Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35305	2013-01-23 10:12:33 +00:00
Jonas Gorski	3e998d9cf9	bcm63xx: move bcm63xx-spi into the kernel The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35304	2013-01-23 10:12:13 +00:00
Felix Fietkau	46e4246d61	kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore SVN-Revision: 35248	2013-01-19 19:14:37 +00:00
Gabor Juhos	ed6d399f8d	ramips: add profile and build image for the Tenda 3G300M Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246	2013-01-19 17:05:07 +00:00
Gabor Juhos	9891603eb5	ramips: add user-space support for the Tenda 3G300M Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35245	2013-01-19 17:05:06 +00:00
Gabor Juhos	7eff5d2df0	ramips: add kernel support for the Tenda 3G300M Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244	2013-01-19 17:05:03 +00:00
Gabor Juhos	f7a943694f	ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243	2013-01-19 15:36:13 +00:00
Gabor Juhos	6aebe6a65d	ramips: allow to override image name/suffix in GENERIC_{4,8}M macros Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242	2013-01-19 15:36:11 +00:00
Gabor Juhos	60dde219d4	ramips: do not stop the build if some targets fail This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238	2013-01-19 08:51:45 +00:00
Jonas Gorski	c3eeff807f	generic: rtl8366_smi: only assign pvid if no pvid was set yet Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35227	2013-01-18 15:19:11 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Gabor Juhos	0de21d9747	kernel: update linux 3.7 to 3.7.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35216	2013-01-18 11:44:42 +00:00
Florian Fainelli	c8215775f3	mvebu: enable PCI in kernel configuration Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35214	2013-01-17 22:29:26 +00:00
Florian Fainelli	5e45a4344c	mvebu: enable PCIe on Marvell Armada 370 Reference Design Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35213	2013-01-17 22:29:22 +00:00
Florian Fainelli	cf9343ac86	mvebu: enable USB on Armada 370 Reference Design Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35212	2013-01-17 22:29:18 +00:00
Florian Fainelli	7e1e7063c2	mvebu: add preliminary support for PCI express Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35211	2013-01-17 22:29:13 +00:00
Florian Fainelli	29c21b973b	mvebu: refresh patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35210	2013-01-17 22:28:58 +00:00
Florian Fainelli	28acc6588d	kernel: refresh 3.8 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35209	2013-01-17 22:28:53 +00:00
Florian Fainelli	a286a55c6f	mvebu: add board detection scripts Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35208	2013-01-17 22:28:48 +00:00
Florian Fainelli	f7858466e2	mvebu: enable /proc/devicetree usage This is going to be used for proper user-space board identification (ala mcs814x). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35207	2013-01-17 22:28:37 +00:00
Florian Fainelli	15b4681e3e	mvebu: add default profile Such that relevant kernel modules are selected (USB, I2C, SATA, RTC, SDIO) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35206	2013-01-17 22:28:33 +00:00
Jo-Philipp Wich	7399df1d69	x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821 ) SVN-Revision: 35200	2013-01-17 15:46:26 +00:00
Gabor Juhos	57f7408b8a	generic: add EHCI\|OHCI platform driver fix to 3.[36] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35194	2013-01-17 13:54:14 +00:00
Felix Fietkau	576aa2af0c	ramips: enable BR6425N in kernel config Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35191	2013-01-17 09:39:44 +00:00
Florian Fainelli	05466923b8	mvebu: add support for EHCI controller Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35181	2013-01-15 19:55:50 +00:00
Florian Fainelli	c53a347034	mvebu: add support for the Marvell Armada 370 Reference Design board Keep the patches in sync with the upstream developments. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35179	2013-01-15 19:55:40 +00:00
Florian Fainelli	58f8c5d87a	mvebu: enable SMP with SMP on UP enabled The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35178	2013-01-15 19:55:31 +00:00
Florian Fainelli	fa1afc1fa9	mvebu: add support for RTC Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35176	2013-01-15 19:55:19 +00:00
Felix Fietkau	b3b04e9fb1	kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8 SVN-Revision: 35162	2013-01-14 18:55:36 +00:00
Gabor Juhos	78dc69e1d4	generic: remove EHCI platform driver fix from 3.8 It is not needed on 3.8. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35160	2013-01-14 17:53:55 +00:00
Gabor Juhos	b035c594ae	generic: add EHCI\|OHCI platform driver fix from the cns21xx target Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35159	2013-01-14 17:47:23 +00:00
Florian Fainelli	1e103b2ecc	target: enable XZ BCJ decompressor code after r35097 Required to actually be able to mount squashfs xz compressed filesystems. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35156	2013-01-14 16:34:25 +00:00
Felix Fietkau	e0e3509b5c	kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx SVN-Revision: 35154	2013-01-14 16:08:18 +00:00
Felix Fietkau	1474359bd3	ar71xx: fix unaligned access in cls_u32 SVN-Revision: 35132	2013-01-13 16:48:23 +00:00
Felix Fietkau	e67b6ee395	ar71xx: fix unaligned access in a few more places SVN-Revision: 35130	2013-01-13 15:37:58 +00:00
Felix Fietkau	b5bcbdfbb5	ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32 SVN-Revision: 35129	2013-01-13 14:54:39 +00:00
Felix Fietkau	53e0ba49b9	ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed SVN-Revision: 35127	2013-01-13 13:06:09 +00:00
Felix Fietkau	5d55cece6e	kernel: add back the mips module relocation patch SVN-Revision: 35126	2013-01-13 12:23:42 +00:00
Felix Fietkau	764520975c	ar71xx: add more cpu feature overrides, slightly reduces kernel size SVN-Revision: 35125	2013-01-13 11:33:48 +00:00
Felix Fietkau	310724c14d	ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel SVN-Revision: 35124	2013-01-13 11:33:44 +00:00
Hauke Mehrtens	2bf03f971d	brcm47xx: BCMA - Update default IRQ assignment per upstream change Update the default IRQ assignment for unrecognized devices per the upstream change. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35121	2013-01-12 15:00:01 +00:00
Gabor Juhos	5d1ecfc26d	refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35119	2013-01-12 12:29:55 +00:00
Gabor Juhos	ef75e6c71a	malta: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35118	2013-01-12 12:29:53 +00:00
Gabor Juhos	3d057de4db	malta: build lzma and gzip compressed uImages Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35117	2013-01-12 12:29:52 +00:00
Gabor Juhos	df8a8f2515	adm5120: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35116	2013-01-12 12:25:42 +00:00
Gabor Juhos	d472567997	adm5120: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35115	2013-01-12 12:25:40 +00:00
Gabor Juhos	eb2188c0e2	ar71xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35114	2013-01-12 12:25:38 +00:00
Gabor Juhos	fe86bc9370	ar71xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35113	2013-01-12 12:25:36 +00:00
Gabor Juhos	ca882f230d	mpc83xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35112	2013-01-12 12:25:34 +00:00
Gabor Juhos	eba037cd1f	mpc83xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35111	2013-01-12 12:25:32 +00:00
Gabor Juhos	ff2ce330a5	ramips: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35110	2013-01-12 12:25:30 +00:00
Gabor Juhos	d53f8c3ded	ramips: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35109	2013-01-12 12:25:28 +00:00
Gabor Juhos	f8f009ca43	rb532: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35108	2013-01-12 12:25:26 +00:00
Gabor Juhos	cd71dcdab7	rb532: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35107	2013-01-12 12:25:24 +00:00
Gabor Juhos	7098354885	ppc44x: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35106	2013-01-12 12:25:21 +00:00
Gabor Juhos	83fccacec2	ppc44x: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35105	2013-01-12 12:25:20 +00:00
Gabor Juhos	9d3bae8f0e	ppc40x: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35104	2013-01-12 12:25:18 +00:00
Gabor Juhos	06fea75afb	ppc40x: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35103	2013-01-12 12:25:16 +00:00
Gabor Juhos	a51f602494	cns21xx: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35102	2013-01-12 12:25:14 +00:00
Gabor Juhos	bdc6ec4974	cns21xx: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35101	2013-01-12 12:25:12 +00:00
Gabor Juhos	c19c30cefd	kernel: update linux 3.7 to 3.7.2 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35100	2013-01-12 11:43:08 +00:00
Florian Fainelli	ecf230710f	mvebu: update to 3.8-rc3 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35086	2013-01-10 17:20:25 +00:00
Hauke Mehrtens	548cb59826	brcm47xx: update bgmac driver to the version in mainline kernel SVN-Revision: 35083	2013-01-10 14:22:19 +00:00
Hauke Mehrtens	885eea1842	kernel: update bcma and ssb to master-2013-01-09 from wireless-testing SVN-Revision: 35080	2013-01-10 14:05:18 +00:00
Imre Kaloz	a2950fabd4	clean up PCI bus topology This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35079	2013-01-10 13:25:12 +00:00
Imre Kaloz	b63b970866	clean up PCI bus topology This makes the PCI bus topology more standard for devices behind a bridge Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 35078	2013-01-10 13:23:33 +00:00
John Crispin	64910f4490	fixes USB reset on ARV7518 SVN-Revision: 35077	2013-01-10 06:44:58 +00:00
John Crispin	4834d09a3f	fixes none-pci build SVN-Revision: 35062	2013-01-09 09:04:09 +00:00
Florian Fainelli	25475a095e	mvebu: add inital support for Marvell Armada XP/370 SoCs This brings in the initial support for the Marvell Armada XP/370 SoCs. Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following interfaces: - Ethernet - SDIO - GPIOs - SATA Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35058	2013-01-08 22:20:16 +00:00
Florian Fainelli	97acd10458	add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35057	2013-01-08 22:20:11 +00:00
Florian Fainelli	9b601b79d0	add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35056	2013-01-08 22:20:06 +00:00
Florian Fainelli	8dbed04ec9	kernel: add support for 3.8-rc2 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35055	2013-01-08 22:19:31 +00:00
Hauke Mehrtens	7b0af8193b	brcm47xx: BGMAC Driver corrections 1) Fix what appears to be a logic error in bgmac_phy_advertise. 2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo interface w/ the driver to work correctly. I still have the issue with the interface always being HD when the speed/duplex is set manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35052	2013-01-07 22:51:39 +00:00
Florian Fainelli	4ec57bdc06	update to 3.7 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35045	2013-01-07 18:16:36 +00:00
Gabor Juhos	ba4de984b9	ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards The PHY_SWAP and PHY_ADDR_SWAP bits are initialized differently by different versions of the bootloader. This leads to broken ethernet connection with OpenWrt on some boards. Turn both SWAP bits OFF on these boards to make it consistent regardless of the bootloader used. Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35037	2013-01-07 14:30:37 +00:00
Gabor Juhos	251e4608b0	ar71xx: add missing Makefile entry to the 74HC153 GPIO patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35035	2013-01-07 14:14:41 +00:00
Felix Fietkau	5154270694	orion: debloat the kernel some more SVN-Revision: 35023	2013-01-06 15:09:47 +00:00
Felix Fietkau	75657ff8a9	kernel: add missing config symbol SVN-Revision: 35021	2013-01-06 15:09:39 +00:00
John Crispin	f2f9332350	adds support for Edimax BR-6524N fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020	2013-01-06 11:11:42 +00:00
John Crispin	d5d2e8b4db	missing underscore in 3.3 regmap patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35018	2013-01-06 10:01:53 +00:00
Felix Fietkau	2e8409cce3	kernel: port the regmap fix to 3.6 (#12749 ), refresh patches for other versions SVN-Revision: 35016	2013-01-05 13:33:44 +00:00
John Crispin	e6aac19237	fix regmap debloat patch SVN-Revision: 35015	2013-01-05 00:20:05 +00:00
Jonas Gorski	e952eaa112	bcm63xx: Add Huawei HG556a support Add Huawei EchoLife HG556a support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: added some code style fixes] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35011	2013-01-04 14:47:57 +00:00
Jonas Gorski	0e58173fa5	bcm63xx: Fix caldata partition mtd patch Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash. Tested-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 35010	2013-01-04 14:47:50 +00:00
Jonas Gorski	10fc07daac	bcm63xx: remove 3.3 support 3.6 is tested enough to be considered stable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35009	2013-01-04 14:47:43 +00:00
Felix Fietkau	96f3911981	kernel: move regmap bloat out of the kernel image if it is only being used in modules SVN-Revision: 34999	2013-01-03 18:39:50 +00:00
Hauke Mehrtens	a105eea1a1	brcm47xx: various fixes and code cleanups for irq code This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34997	2013-01-03 16:56:54 +00:00
Hauke Mehrtens	4443997fd8	brcm47xx: add bgmac driver This Ethernet driver is in early development stage and still has some problems. This was working on my bcm4716 based device. Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver. SVN-Revision: 34995	2013-01-03 02:05:22 +00:00
Hauke Mehrtens	8f6bdcffa1	brcm47xx: build b44 as a module SVN-Revision: 34994	2013-01-03 02:00:25 +00:00
Hauke Mehrtens	22d62d311a	brcm47xx: run ifup before starting the switch In addition check_module is not needed, nobody checks the return value. SVN-Revision: 34993	2013-01-03 01:59:43 +00:00
Hauke Mehrtens	97b2b601c7	brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are ignored when setting the interrupt masks. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34990	2013-01-03 01:56:13 +00:00
Hauke Mehrtens	f74e847301	brcm47xx: improve IRQ handling for bcma based devices This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 34989	2013-01-03 01:55:34 +00:00
Hauke Mehrtens	25afeba608	brcm47xx: add a new version of the nvram rewrite patch This is the version like it was send for mainline inclusion. SVN-Revision: 34988	2013-01-03 01:53:30 +00:00
Hauke Mehrtens	edc7ab525f	brcm47xx: move patches already in the mainline kernel to the front SVN-Revision: 34987	2013-01-03 01:51:31 +00:00
Hauke Mehrtens	76c767f122	brcm47xx: remove support for kernel version 3.3 SVN-Revision: 34986	2013-01-03 01:48:43 +00:00
Jo-Philipp Wich	7a73c2f91f	generic: add some missing kernel config symbols spotted on x86 SVN-Revision: 34981	2013-01-02 19:10:24 +00:00
Felix Fietkau	741f6ba7ef	x86: fix typo in alix2/net5501 default packages SVN-Revision: 34972	2013-01-02 16:09:23 +00:00
John Crispin	569bbe4970	rt5350 switch support fix RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969	2013-01-02 11:28:21 +00:00
Gabor Juhos	373b0b9ad1	generic: fix UBIFS build error if XZ compression is disabled Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34959	2013-01-02 08:53:07 +00:00
Gabor Juhos	d91117459c	adm5120: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34954	2013-01-01 13:15:49 +00:00
Gabor Juhos	f0520f1714	adm5120: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34953	2013-01-01 13:15:44 +00:00
Gabor Juhos	b4315df8e1	adm5120: switch to 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34952	2013-01-01 13:15:41 +00:00
Gabor Juhos	edd36342e5	adm5120: add support for 3.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34951	2013-01-01 13:15:36 +00:00
Gabor Juhos	92cd48e9ea	adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c Also add a compatibility patch for 3.3. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34950	2013-01-01 13:15:30 +00:00
Gabor Juhos	03e09078dc	adm5120: use mtd_read helper in trxsplit.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34949	2013-01-01 13:15:20 +00:00
Gabor Juhos	e1b13e15b2	adm5120: don't include asm/system.h in adm5120-hcd.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34948	2013-01-01 13:15:16 +00:00
Gabor Juhos	cbe5d664e1	generic: add missing symbol for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34947	2013-01-01 13:15:11 +00:00
Gabor Juhos	e1965a1d1a	ar71xx: register the NAND flash controller device on the AP135/136 boards Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34946	2013-01-01 13:10:41 +00:00
Gabor Juhos	66efec6783	ar71xx: allow to register the NAND flash controller on the QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34945	2013-01-01 13:10:36 +00:00
Gabor Juhos	2c77e5d7b3	ar71xxx: allow to select ATH79_DEV_NFC for QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34944	2013-01-01 13:10:34 +00:00
Gabor Juhos	d8446d65fe	ar71xxx: allow to build the ar934x_nfc driver for QCA955x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34943	2013-01-01 13:10:29 +00:00
Gabor Juhos	93c322cacc	ar71xx: fix NAND controller base for QCA955x SoCs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34942	2013-01-01 13:10:26 +00:00
Gabor Juhos	b57cc9a538	ar71xx: fold AP135 patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34941	2013-01-01 13:10:22 +00:00
John Crispin	624eb36fff	adds missing symbol SVN-Revision: 34939	2012-12-30 21:31:10 +00:00
John Crispin	ce57efa3ea	fixes usb port on arv 4518 SVN-Revision: 34935	2012-12-30 12:38:40 +00:00
Gabor Juhos	fb07876f25	ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934	2012-12-30 08:23:48 +00:00
Gabor Juhos	6708d68c24	ramips: build firmware image for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927	2012-12-29 17:50:40 +00:00
Gabor Juhos	8b1ac2ae37	ramips: add user-space support for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34926	2012-12-29 17:50:38 +00:00

... 5 6 7 8 9 ...

10152 commits