ar71xx: remove 3.6 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35114
This commit is contained in:
Gabor Juhos 2013-01-12 12:25:38 +00:00
parent fe86bc9370
commit eb2188c0e2
102 changed files with 0 additions and 9399 deletions

View file

@ -1,240 +0,0 @@
CONFIG_AG71XX=y
CONFIG_AG71XX_AR8216_SUPPORT=y
# CONFIG_AG71XX_DEBUG is not set
# CONFIG_AG71XX_DEBUG_FS is not set
CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ATH79=y
CONFIG_ATH79_DEV_AP9X_PCI=y
CONFIG_ATH79_DEV_DSA=y
CONFIG_ATH79_DEV_ETH=y
CONFIG_ATH79_DEV_GPIO_BUTTONS=y
CONFIG_ATH79_DEV_LEDS_GPIO=y
CONFIG_ATH79_DEV_M25P80=y
CONFIG_ATH79_DEV_NFC=y
CONFIG_ATH79_DEV_SPI=y
CONFIG_ATH79_DEV_USB=y
CONFIG_ATH79_DEV_WMAC=y
CONFIG_ATH79_MACH_ALFA_AP96=y
CONFIG_ATH79_MACH_ALFA_NX=y
CONFIG_ATH79_MACH_ALL0258N=y
CONFIG_ATH79_MACH_ALL0315N=y
CONFIG_ATH79_MACH_AP113=y
CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP136=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_MR600=y
CONFIG_ATH79_MACH_MZK_W04NU=y
CONFIG_ATH79_MACH_MZK_W300NH=y
CONFIG_ATH79_MACH_NBG460N=y
CONFIG_ATH79_MACH_OM2P=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y
CONFIG_ATH79_MACH_PB92=y
CONFIG_ATH79_MACH_RB2011=y
CONFIG_ATH79_MACH_RB4XX=y
CONFIG_ATH79_MACH_RB750=y
CONFIG_ATH79_MACH_RW2458N=y
CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TEW_712BR=y
CONFIG_ATH79_MACH_TL_MR11U=y
CONFIG_ATH79_MACH_TL_MR3020=y
CONFIG_ATH79_MACH_TL_MR3X20=y
CONFIG_ATH79_MACH_TL_WA901ND=y
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y
CONFIG_ATH79_MACH_TL_WR741ND=y
CONFIG_ATH79_MACH_TL_WR741ND_V4=y
CONFIG_ATH79_MACH_TL_WR841N_V1=y
CONFIG_ATH79_MACH_TL_WR841N_V8=y
CONFIG_ATH79_MACH_TL_WR941ND=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNDR4300=y
CONFIG_ATH79_MACH_WNR2000=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
CONFIG_ATH79_MACH_WZR_HP_G450H=y
CONFIG_ATH79_MACH_ZCN_1523H=y
CONFIG_ATH79_NVRAM=y
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
CONFIG_ATH79_ROUTERBOOT=y
# CONFIG_ATH79_WDT is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_NXP_74HC153=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_GPIO=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_SOURCE="../../root"
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_LEDS_RB750 is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_WNDR3700_USB is not set
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MICREL_PHY=y
CONFIG_MIPS=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_MIPS_MACHINE=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MYLOADER_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_TPLINK_PARTS=y
CONFIG_MTD_WRT160NL_PARTS=y
CONFIG_MYLOADER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6063=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_AR724X=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RLE_DECOMPRESS=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367_PHY=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_AR933X=y
CONFIG_SERIAL_AR933X_CONSOLE=y
CONFIG_SERIAL_AR933X_NR_UARTS=2
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_AR71XX=y
CONFIG_SOC_AR724X=y
CONFIG_SOC_AR913X=y
CONFIG_SOC_AR933X=y
CONFIG_SOC_AR934X=y
CONFIG_SOC_QCA955X=y
CONFIG_SPI=y
CONFIG_SPI_AP83=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_RB4XX is not set
# CONFIG_SPI_RB4XX_CPLD is not set
# CONFIG_SPI_VSC7385 is not set
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_ZONE_DMA_FLAG=0

View file

@ -1,145 +0,0 @@
From 58a4dbd4160ee4a1428da23b81ff6d94c9a067a8 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 4 Aug 2012 15:03:55 +0000
Subject: [PATCH] MIPS: ath79: use a helper function for USB resource
initialization
commit 8d3e03e186cb94a333d0176fe8b22a6df200fcc7 upstream.
This improves code readability, and ensures that
all resource fields will be initialized correctly.
Additionally, it helps to reduce the size of the
kernel image by using uninitialized resource
variables.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4171/
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ath79/dev-usb.c | 64 ++++++++++++++++++++-------------------------
1 file changed, 28 insertions(+), 36 deletions(-)
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -25,17 +25,7 @@
#include "common.h"
#include "dev-usb.h"
-static struct resource ath79_ohci_resources[] = {
- [0] = {
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ATH79_MISC_IRQ_OHCI,
- .end = ATH79_MISC_IRQ_OHCI,
- .flags = IORESOURCE_IRQ,
- },
-};
+static struct resource ath79_ohci_resources[2];
static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
@@ -54,17 +44,7 @@ static struct platform_device ath79_ohci
},
};
-static struct resource ath79_ehci_resources[] = {
- [0] = {
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = ATH79_CPU_IRQ_USB,
- .end = ATH79_CPU_IRQ_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
+static struct resource ath79_ehci_resources[2];
static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
@@ -90,6 +70,20 @@ static struct platform_device ath79_ehci
},
};
+static void __init ath79_usb_init_resource(struct resource res[2],
+ unsigned long base,
+ unsigned long size,
+ int irq)
+{
+ res[0].flags = IORESOURCE_MEM;
+ res[0].start = base;
+ res[0].end = base + size - 1;
+
+ res[1].flags = IORESOURCE_IRQ;
+ res[1].start = irq;
+ res[1].end = irq;
+}
+
#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
AR71XX_RESET_USB_PHY | \
AR71XX_RESET_USB_OHCI_DLL)
@@ -114,12 +108,12 @@ static void __init ath79_usb_setup(void)
mdelay(900);
- ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
- ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
+ ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE,
+ AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI);
platform_device_register(&ath79_ohci_device);
- ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
- ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
+ ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE,
+ AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB);
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
platform_device_register(&ath79_ehci_device);
}
@@ -143,10 +137,8 @@ static void __init ar7240_usb_setup(void
iounmap(usb_ctrl_base);
- ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
- ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
- ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
- ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
+ ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE,
+ AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB);
platform_device_register(&ath79_ohci_device);
}
@@ -161,8 +153,8 @@ static void __init ar724x_usb_setup(void
ath79_device_reset_clear(AR724X_RESET_USB_PHY);
mdelay(10);
- ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
+ ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE,
+ AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
@@ -178,8 +170,8 @@ static void __init ar913x_usb_setup(void
ath79_device_reset_clear(AR913X_RESET_USB_PHY);
mdelay(10);
- ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
+ ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE,
+ AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
@@ -195,8 +187,8 @@ static void __init ar933x_usb_setup(void
ath79_device_reset_clear(AR933X_RESET_USB_PHY);
mdelay(10);
- ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
- ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
+ ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE,
+ AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}

View file

@ -1,86 +0,0 @@
From 9d9e4d955b1def6d63470bcf45e8ead1b2ae4892 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 4 Aug 2012 15:03:56 +0000
Subject: [PATCH] MIPS: ath79: add USB platform setup code for AR934X
commit 00ffed582fe8a3f7556593c0e8baaf3da3df85b0 upstream.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4172/
Signed-off-by: John Crispin <blogic@openwrt.org>
Conflicts:
arch/mips/include/asm/mach-ath79/ar71xx_regs.h
---
arch/mips/ath79/dev-usb.c | 28 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 ++++++
2 files changed, 35 insertions(+)
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -193,6 +193,32 @@ static void __init ar933x_usb_setup(void
platform_device_register(&ath79_ehci_device);
}
+static void __init ar934x_usb_setup(void)
+{
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+ return;
+
+ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+ udelay(1000);
+
+ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
+ udelay(1000);
+
+ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
+ udelay(1000);
+
+ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+ udelay(1000);
+
+ ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE,
+ AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
+ platform_device_register(&ath79_ehci_device);
+}
+
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
@@ -205,6 +231,8 @@ void __init ath79_register_usb(void)
ar913x_usb_setup();
else if (soc_is_ar933x())
ar933x_usb_setup();
+ else if (soc_is_ar934x())
+ ar934x_usb_setup();
else
BUG();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -65,6 +65,8 @@
#define AR934X_WMAC_SIZE 0x20000
#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
#define AR934X_SRIF_SIZE 0x1000
+#define AR934X_EHCI_BASE 0x1b000000
+#define AR934X_EHCI_SIZE 0x200
/*
* DDR_CTRL block
@@ -290,6 +292,11 @@
#define AR933X_RESET_USB_PHY BIT(4)
#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
+#define AR934X_RESET_USB_HOST BIT(5)
+#define AR934X_RESET_USB_PHY BIT(4)
+#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
+
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)

View file

@ -1,32 +0,0 @@
From f60097efacfaebd2d4cf2c301fb865edc9806f47 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 4 Aug 2012 15:03:57 +0000
Subject: [PATCH] MIPS: ath79: register USB host controller on the DB120 board
commit a0aa4577ec579eb230557b85d721fd019ea69e02 upstream.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4173/
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ath79/mach-db120.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -25,6 +25,7 @@
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
+#include "dev-usb.h"
#include "dev-wmac.h"
#include "pci.h"
@@ -126,6 +127,7 @@ static void __init db120_setup(void)
db120_gpio_keys);
ath79_register_spi(&db120_spi_data, db120_spi_info,
ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
}

View file

@ -1,239 +0,0 @@
From 2dff8ad92661b6c99e9ba8b5918e43b522551556 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 14 Nov 2012 10:38:13 +0100
Subject: [PATCH] tty/serial/ar933x_uart: fix baud rate calculation
commit 2dff8ad92661b6c99e9ba8b5918e43b522551556 upstream.
The UART of the AR933x SoC implements a fractional divisor
for generating the desired baud rate.
The current code uses a fixed value for the fractional
part of the divisor, and this leads to improperly
calculated baud rates:
baud scale step real baud diff
300 5207* 8192 17756 17456 5818.66%
600 2603* 8192 35511 34911 5818.50%
1200 1301* 8192 71023 69823 5818.58%
2400 650* 8192 11241 8841 368.37%
4800 324* 8192 22645 17845 371.77%
9600 161 8192 9645 45 0.46%
14400 107 8192 14468 68 0.47%
19200 80 8192 19290 90 0.46%
28800 53 8192 28935 135 0.46%
38400 39 8192 39063 663 1.72%
57600 26 8192 57870 270 0.46%
115200 12 8192 120192 4992 4.33%
230400 5 8192 260417 30017 13.02%
460800 2 8192 520833 60033 13.02%
921600 0 8192 1562500 640900 69.93%
After the patch, the integer and fractional parts of the
divisor will be calculated dynamically. This ensures that
the UART will use correct baud rates:
baud scale step real baud diff
300 6 11 300 0 0.00%
600 54 173 600 0 0.00%
1200 30 195 1200 0 0.00%
2400 30 390 2400 0 0.00%
4800 48 1233 4800 0 0.00%
9600 78 3976 9600 0 0.00%
14400 98 7474 14400 0 0.00%
19200 55 5637 19200 0 0.00%
28800 130 19780 28800 0 0.00%
38400 36 7449 38400 0 0.00%
57600 78 23857 57600 0 0.00%
115200 43 26575 115200 0 0.00%
230400 23 28991 230400 0 0.00%
460800 11 28991 460800 0 0.00%
921600 5 28991 921599 -1 0.00%
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/ar933x_uart.c | 90 +++++++++++++++++++++++++++++++++++---
1 file changed, 85 insertions(+), 5 deletions(-)
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -25,11 +25,19 @@
#include <linux/io.h>
#include <linux/irq.h>
+#include <asm/div64.h>
+
#include <asm/mach-ath79/ar933x_uart.h>
#include <asm/mach-ath79/ar933x_uart_platform.h>
#define DRIVER_NAME "ar933x-uart"
+#define AR933X_UART_MAX_SCALE 0xff
+#define AR933X_UART_MAX_STEP 0xffff
+
+#define AR933X_UART_MIN_BAUD 300
+#define AR933X_UART_MAX_BAUD 3000000
+
#define AR933X_DUMMY_STATUS_RD 0x01
static struct uart_driver ar933x_uart_driver;
@@ -37,6 +45,8 @@ static struct uart_driver ar933x_uart_dr
struct ar933x_uart_port {
struct uart_port port;
unsigned int ier; /* shadow Interrupt Enable Register */
+ unsigned int min_baud;
+ unsigned int max_baud;
};
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
@@ -162,6 +172,57 @@ static void ar933x_uart_enable_ms(struct
{
}
+/*
+ * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
+ */
+static unsigned long ar933x_uart_get_baud(unsigned int clk,
+ unsigned int scale,
+ unsigned int step)
+{
+ u64 t;
+ u32 div;
+
+ div = (2 << 16) * (scale + 1);
+ t = clk;
+ t *= step;
+ t += (div / 2);
+ do_div(t, div);
+
+ return t;
+}
+
+static void ar933x_uart_get_scale_step(unsigned int clk,
+ unsigned int baud,
+ unsigned int *scale,
+ unsigned int *step)
+{
+ unsigned int tscale;
+ long min_diff;
+
+ *scale = 0;
+ *step = 0;
+
+ min_diff = baud;
+ for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
+ u64 tstep;
+ int diff;
+
+ tstep = baud * (tscale + 1);
+ tstep *= (2 << 16);
+ do_div(tstep, clk);
+
+ if (tstep > AR933X_UART_MAX_STEP)
+ break;
+
+ diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
+ if (diff < min_diff) {
+ min_diff = diff;
+ *scale = tscale;
+ *step = tstep;
+ }
+ }
+}
+
static void ar933x_uart_set_termios(struct uart_port *port,
struct ktermios *new,
struct ktermios *old)
@@ -169,7 +230,7 @@ static void ar933x_uart_set_termios(stru
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
unsigned int cs;
unsigned long flags;
- unsigned int baud, scale;
+ unsigned int baud, scale, step;
/* Only CS8 is supported */
new->c_cflag &= ~CSIZE;
@@ -191,8 +252,8 @@ static void ar933x_uart_set_termios(stru
/* Mark/space parity is not supported */
new->c_cflag &= ~CMSPAR;
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
- scale = (port->uartclk / (16 * baud)) - 1;
+ baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
+ ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
/*
* Ok, we're now changing the port state. Do it with
@@ -200,6 +261,10 @@ static void ar933x_uart_set_termios(stru
*/
spin_lock_irqsave(&up->port.lock, flags);
+ /* disable the UART */
+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
+
/* Update the per-port timeout. */
uart_update_timeout(port, new->c_cflag, baud);
@@ -210,7 +275,7 @@ static void ar933x_uart_set_termios(stru
up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
- scale << AR933X_UART_CLOCK_SCALE_S | 8192);
+ scale << AR933X_UART_CLOCK_SCALE_S | step);
/* setup configuration register */
ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
@@ -219,6 +284,11 @@ static void ar933x_uart_set_termios(stru
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
+ /* reenable the UART */
+ ar933x_uart_rmw(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
+ AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
+
spin_unlock_irqrestore(&up->port.lock, flags);
if (tty_termios_baud_rate(new))
@@ -401,6 +471,8 @@ static void ar933x_uart_config_port(stru
static int ar933x_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
if (ser->type != PORT_UNKNOWN &&
ser->type != PORT_AR933X)
return -EINVAL;
@@ -408,7 +480,8 @@ static int ar933x_uart_verify_port(struc
if (ser->irq < 0 || ser->irq >= NR_IRQS)
return -EINVAL;
- if (ser->baud_base < 28800)
+ if (ser->baud_base < up->min_baud ||
+ ser->baud_base > up->max_baud)
return -EINVAL;
return 0;
@@ -561,6 +634,7 @@ static int __devinit ar933x_uart_probe(s
struct uart_port *port;
struct resource *mem_res;
struct resource *irq_res;
+ unsigned int baud;
int id;
int ret;
@@ -611,6 +685,12 @@ static int __devinit ar933x_uart_probe(s
port->fifosize = AR933X_UART_FIFO_SIZE;
port->ops = &ar933x_uart_ops;
+ baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
+ up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
+
+ baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
+ up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
+
ar933x_uart_add_console_port(up);
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);

View file

@ -1,24 +0,0 @@
From 4b0f8aaea1f9e2f931c4de785d9ce46ff7164627 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 17 Jun 2012 12:55:24 +0200
Subject: [PATCH 02/34] MIPS: pci-ar724x: use correct value for AR724X_PCI_MEM_SIZE
The current definiton is wrong, it is conflicting
with AR724X_PCI_CFG_BASE.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar724x.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -21,7 +21,7 @@
#define AR724X_PCI_CTRL_SIZE 0x100
#define AR724X_PCI_MEM_BASE 0x10000000
-#define AR724X_PCI_MEM_SIZE 0x08000000
+#define AR724X_PCI_MEM_SIZE 0x04000000
#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c

View file

@ -1,21 +0,0 @@
From 01dbfe17b8ff628b6e2b3c75e1fc8c11d4cca644 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Thu, 28 Jun 2012 19:19:58 +0200
Subject: [PATCH 03/34] MIPS: pci-ar71xx: fix AR71XX_PCI_MEM_SIZE
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar71xx.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -24,7 +24,7 @@
#include <asm/mach-ath79/pci.h>
#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x08000000
+#define AR71XX_PCI_MEM_SIZE 0x07000000
#define AR71XX_PCI_WIN0_OFFS 0x10000000
#define AR71XX_PCI_WIN1_OFFS 0x11000000

View file

@ -1,94 +0,0 @@
From f2d2d928c3900b67a5f95e53b86de5b61a3ab12c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 11 Jun 2012 13:19:44 +0200
Subject: [PATCH 04/34] MIPS: pci-ar724x: convert to a platform driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar724x.c | 57 ++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 55 insertions(+), 2 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -11,6 +11,8 @@
#include <linux/irq.h>
#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/pci.h>
@@ -262,7 +264,7 @@ static struct irq_chip ar724x_pci_irq_ch
.irq_mask_ack = ar724x_pci_irq_mask,
};
-static void __init ar724x_pci_irq_init(int irq)
+static void __devinit ar724x_pci_irq_init(int irq)
{
void __iomem *base;
int i;
@@ -282,7 +284,7 @@ static void __init ar724x_pci_irq_init(i
irq_set_chained_handler(irq, ar724x_pci_irq_handler);
}
-int __init ar724x_pcibios_init(int irq)
+int __devinit ar724x_pcibios_init(int irq)
{
int ret;
@@ -312,3 +314,54 @@ err_unmap_devcfg:
err:
return ret;
}
+
+static int __devinit ar724x_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int irq;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
+ if (!res)
+ return -EINVAL;
+
+ ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (ar724x_pci_ctrl_base == NULL)
+ return -EBUSY;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+ if (!res)
+ return -EINVAL;
+
+ ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!ar724x_pci_devcfg_base)
+ return -EBUSY;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
+
+ ar724x_pci_link_up = ar724x_pci_check_link();
+ if (!ar724x_pci_link_up)
+ dev_warn(&pdev->dev, "PCIe link is down\n");
+
+ ar724x_pci_irq_init(irq);
+
+ register_pci_controller(&ar724x_pci_controller);
+
+ return 0;
+}
+
+static struct platform_driver ar724x_pci_driver = {
+ .probe = ar724x_pci_probe,
+ .driver = {
+ .name = "ar724x-pci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ar724x_pci_init(void)
+{
+ return platform_driver_register(&ar724x_pci_driver);
+}
+
+postcore_initcall(ar724x_pci_init);

View file

@ -1,104 +0,0 @@
From d1a22e73f991145a4abd7d0c37bcf318703c89ed Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 11 Jun 2012 13:24:55 +0200
Subject: [PATCH 05/34] MIPS: pci-ar71xx: convert to a platform driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar71xx.c | 60 +++++++++++++++++++++++++++++++++++++++++---
1 files changed, 56 insertions(+), 4 deletions(-)
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -18,6 +18,8 @@
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
@@ -309,7 +311,7 @@ static struct irq_chip ar71xx_pci_irq_ch
.irq_mask_ack = ar71xx_pci_irq_mask,
};
-static __init void ar71xx_pci_irq_init(void)
+static __devinit void ar71xx_pci_irq_init(int irq)
{
void __iomem *base = ath79_reset_base;
int i;
@@ -324,10 +326,10 @@ static __init void ar71xx_pci_irq_init(v
irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
handle_level_irq);
- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
+ irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
}
-static __init void ar71xx_pci_reset(void)
+static __devinit void ar71xx_pci_reset(void)
{
void __iomem *ddr_base = ath79_ddr_base;
@@ -367,9 +369,59 @@ __init int ar71xx_pcibios_init(void)
/* clear bus errors */
ar71xx_pci_check_error(1);
- ar71xx_pci_irq_init();
+ ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
register_pci_controller(&ar71xx_pci_controller);
return 0;
}
+
+static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int irq;
+ u32 t;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+ if (!res)
+ return -EINVAL;
+
+ ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!ar71xx_pcicfg_base)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
+
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
+
+ /* clear bus errors */
+ ar71xx_pci_check_error(1);
+
+ ar71xx_pci_irq_init(irq);
+
+ register_pci_controller(&ar71xx_pci_controller);
+
+ return 0;
+}
+
+static struct platform_driver ar71xx_pci_driver = {
+ .probe = ar71xx_pci_probe,
+ .driver = {
+ .name = "ar71xx-pci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ar71xx_pci_init(void)
+{
+ return platform_driver_register(&ar71xx_pci_driver);
+}
+
+postcore_initcall(ar71xx_pci_init);

View file

@ -1,94 +0,0 @@
From c3a8b5fa196cedc4b940c1e5ec482dd875aa3180 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 11 Jun 2012 13:38:06 +0200
Subject: [PATCH 06/34] MIPS: ath79: move global PCI defines into a common header
The constants will be used by a subsequent patch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 24 ++++++++++++++++++++++++
arch/mips/pci/pci-ar71xx.c | 16 ----------------
arch/mips/pci/pci-ar724x.c | 8 --------
3 files changed, 24 insertions(+), 24 deletions(-)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -41,11 +41,35 @@
#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
#define AR71XX_RESET_SIZE 0x100
+#define AR71XX_PCI_MEM_BASE 0x10000000
+#define AR71XX_PCI_MEM_SIZE 0x07000000
+
+#define AR71XX_PCI_WIN0_OFFS 0x10000000
+#define AR71XX_PCI_WIN1_OFFS 0x11000000
+#define AR71XX_PCI_WIN2_OFFS 0x12000000
+#define AR71XX_PCI_WIN3_OFFS 0x13000000
+#define AR71XX_PCI_WIN4_OFFS 0x14000000
+#define AR71XX_PCI_WIN5_OFFS 0x15000000
+#define AR71XX_PCI_WIN6_OFFS 0x16000000
+#define AR71XX_PCI_WIN7_OFFS 0x07000000
+
+#define AR71XX_PCI_CFG_BASE \
+ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
+#define AR71XX_PCI_CFG_SIZE 0x100
+
#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
#define AR7240_USB_CTRL_SIZE 0x100
#define AR7240_OHCI_BASE 0x1b000000
#define AR7240_OHCI_SIZE 0x1000
+#define AR724X_PCI_MEM_BASE 0x10000000
+#define AR724X_PCI_MEM_SIZE 0x04000000
+
+#define AR724X_PCI_CFG_BASE 0x14000000
+#define AR724X_PCI_CFG_SIZE 0x1000
+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
+#define AR724X_PCI_CTRL_SIZE 0x100
+
#define AR724X_EHCI_BASE 0x1b000000
#define AR724X_EHCI_SIZE 0x1000
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -25,22 +25,6 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/pci.h>
-#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x07000000
-
-#define AR71XX_PCI_WIN0_OFFS 0x10000000
-#define AR71XX_PCI_WIN1_OFFS 0x11000000
-#define AR71XX_PCI_WIN2_OFFS 0x12000000
-#define AR71XX_PCI_WIN3_OFFS 0x13000000
-#define AR71XX_PCI_WIN4_OFFS 0x14000000
-#define AR71XX_PCI_WIN5_OFFS 0x15000000
-#define AR71XX_PCI_WIN6_OFFS 0x16000000
-#define AR71XX_PCI_WIN7_OFFS 0x07000000
-
-#define AR71XX_PCI_CFG_BASE \
- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-#define AR71XX_PCI_CFG_SIZE 0x100
-
#define AR71XX_PCI_REG_CRP_AD_CBE 0x00
#define AR71XX_PCI_REG_CRP_WRDATA 0x04
#define AR71XX_PCI_REG_CRP_RDDATA 0x08
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -17,14 +17,6 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/pci.h>
-#define AR724X_PCI_CFG_BASE 0x14000000
-#define AR724X_PCI_CFG_SIZE 0x1000
-#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
-#define AR724X_PCI_CTRL_SIZE 0x100
-
-#define AR724X_PCI_MEM_BASE 0x10000000
-#define AR724X_PCI_MEM_SIZE 0x04000000
-
#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c
#define AR724X_PCI_REG_INT_MASK 0x50

View file

@ -1,119 +0,0 @@
From 2fdf8dcff3ffaa806e9f9d7f1c1bd876222cff4d Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 11 Jun 2012 13:39:32 +0200
Subject: [PATCH 07/34] MIPS: ath79: register platform devices for the PCI controllers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/pci.c | 87 +++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 78 insertions(+), 9 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -14,6 +14,8 @@
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
@@ -110,21 +112,88 @@ void __init ath79_pci_set_plat_dev_init(
ath79_pci_plat_dev_init = func;
}
-int __init ath79_register_pci(void)
+static struct platform_device *
+ath79_register_pci_ar71xx(void)
{
- if (soc_is_ar71xx())
- return ar71xx_pcibios_init();
+ struct platform_device *pdev;
+ struct resource res[2];
+
+ memset(res, 0, sizeof(res));
- if (soc_is_ar724x())
- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
+ res[0].name = "cfg_base";
+ res[0].flags = IORESOURCE_MEM;
+ res[0].start = AR71XX_PCI_CFG_BASE;
+ res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
+
+ res[1].flags = IORESOURCE_IRQ;
+ res[1].start = ATH79_CPU_IRQ_IP2;
+ res[1].end = ATH79_CPU_IRQ_IP2;
+
+ pdev = platform_device_register_simple("ar71xx-pci", -1,
+ res, ARRAY_SIZE(res));
+ return pdev;
+}
- if (soc_is_ar9342() || soc_is_ar9344()) {
+static struct platform_device *
+ath79_register_pci_ar724x(int id,
+ unsigned long cfg_base,
+ unsigned long ctrl_base,
+ int irq)
+{
+ struct platform_device *pdev;
+ struct resource res[3];
+
+ memset(res, 0, sizeof(res));
+
+ res[0].name = "cfg_base";
+ res[0].flags = IORESOURCE_MEM;
+ res[0].start = cfg_base;
+ res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
+
+ res[1].name = "ctrl_base";
+ res[1].flags = IORESOURCE_MEM;
+ res[1].start = ctrl_base;
+ res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
+
+ res[2].flags = IORESOURCE_IRQ;
+ res[2].start = irq;
+ res[2].end = irq;
+
+ pdev = platform_device_register_simple("ar724x-pci", id,
+ res, ARRAY_SIZE(res));
+ return pdev;
+}
+
+int __init ath79_register_pci(void)
+{
+ struct platform_device *pdev = NULL;
+
+ if (soc_is_ar71xx()) {
+ pdev = ath79_register_pci_ar71xx();
+ } else if (soc_is_ar724x()) {
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
+ ATH79_CPU_IRQ_IP2);
+ } else if (soc_is_ar9342() ||
+ soc_is_ar9344()) {
u32 bootstrap;
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
- return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
+ if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
+ return -ENODEV;
+
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
+ ATH79_IP2_IRQ(0));
+ } else {
+ /* No PCI support */
+ return -ENODEV;
}
- return -ENODEV;
+ if (!pdev)
+ pr_err("unable to register PCI controller device\n");
+
+ return pdev ? 0 : -ENODEV;
}

View file

@ -1,147 +0,0 @@
From 07224e2fa5f889162ee0560c6ab1eb8cd16a8dd2 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 11 Jun 2012 14:59:39 +0200
Subject: [PATCH 08/34] MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init functions
The functions are unused now, so remove them.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/pci.c | 1 -
arch/mips/include/asm/mach-ath79/pci.h | 28 ----------------------------
arch/mips/pci/pci-ar71xx.c | 26 --------------------------
arch/mips/pci/pci-ar724x.c | 32 --------------------------------
4 files changed, 0 insertions(+), 87 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-ath79/pci.h
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -19,7 +19,6 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/pci.h>
#include "pci.h"
static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
--- a/arch/mips/include/asm/mach-ath79/pci.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Atheros AR71XX/AR724X PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PCI_H
-#define __ASM_MACH_ATH79_PCI_H
-
-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
-int ar71xx_pcibios_init(void);
-#else
-static inline int ar71xx_pcibios_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_PCI_AR724X)
-int ar724x_pcibios_init(int irq);
-#else
-static inline int ar724x_pcibios_init(int irq) { return 0; }
-#endif
-
-#endif /* __ASM_MACH_ATH79_PCI_H */
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -23,7 +23,6 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
#define AR71XX_PCI_REG_CRP_AD_CBE 0x00
#define AR71XX_PCI_REG_CRP_WRDATA 0x04
@@ -335,31 +334,6 @@ static __devinit void ar71xx_pci_reset(v
mdelay(100);
}
-__init int ar71xx_pcibios_init(void)
-{
- u32 t;
-
- ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
- if (ar71xx_pcicfg_base == NULL)
- return -ENOMEM;
-
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
- t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
- | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
-
- /* clear bus errors */
- ar71xx_pci_check_error(1);
-
- ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
-
- register_pci_controller(&ar71xx_pci_controller);
-
- return 0;
-}
-
static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
{
struct resource *res;
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -15,7 +15,6 @@
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/pci.h>
#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c
@@ -276,37 +275,6 @@ static void __devinit ar724x_pci_irq_ini
irq_set_chained_handler(irq, ar724x_pci_irq_handler);
}
-int __devinit ar724x_pcibios_init(int irq)
-{
- int ret;
-
- ret = -ENOMEM;
-
- ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
- AR724X_PCI_CFG_SIZE);
- if (ar724x_pci_devcfg_base == NULL)
- goto err;
-
- ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
- AR724X_PCI_CTRL_SIZE);
- if (ar724x_pci_ctrl_base == NULL)
- goto err_unmap_devcfg;
-
- ar724x_pci_link_up = ar724x_pci_check_link();
- if (!ar724x_pci_link_up)
- pr_warn("ar724x: PCIe link is down\n");
-
- ar724x_pci_irq_init(irq);
- register_pci_controller(&ar724x_pci_controller);
-
- return PCIBIOS_SUCCESSFUL;
-
-err_unmap_devcfg:
- iounmap(ar724x_pci_devcfg_base);
-err:
- return ret;
-}
-
static int __devinit ar724x_pci_probe(struct platform_device *pdev)
{
struct resource *res;

View file

@ -1,35 +0,0 @@
From a018b28d3953a32008de839d997a992a724ae314 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 17:40:45 +0200
Subject: [PATCH 09/34] MIPS: avoid possible resource conflict in register_pci_controller
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci.c | 15 +++++++++++++--
1 files changed, 13 insertions(+), 2 deletions(-)
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -176,9 +176,20 @@ static DEFINE_MUTEX(pci_scan_mutex);
void __devinit register_pci_controller(struct pci_controller *hose)
{
- if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+ struct resource *parent;
+
+ parent = hose->mem_resource->parent;
+ if (!parent)
+ parent = &iomem_resource;
+
+ if (request_resource(parent, hose->mem_resource) < 0)
goto out;
- if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+
+ parent = hose->io_resource->parent;
+ if (!parent)
+ parent = &ioport_resource;
+
+ if (request_resource(parent, hose->io_resource) < 0) {
release_resource(hose->mem_resource);
goto out;
}

View file

@ -1,307 +0,0 @@
From 242aedf3246dc5085271aca56134ac455bfb64b5 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 11:51:34 +0200
Subject: [PATCH 10/34] MIPS: pci-ar724x: use dynamically allocated PCI controller structure
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar724x.c | 129 ++++++++++++++++++++++++++++----------------
1 files changed, 82 insertions(+), 47 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -9,6 +9,7 @@
* by the Free Software Foundation.
*/
+#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/module.h>
@@ -28,38 +29,56 @@
#define AR7240_BAR0_WAR_VALUE 0xffff
-static DEFINE_SPINLOCK(ar724x_pci_lock);
-static void __iomem *ar724x_pci_devcfg_base;
-static void __iomem *ar724x_pci_ctrl_base;
-
-static u32 ar724x_pci_bar0_value;
-static bool ar724x_pci_bar0_is_cached;
-static bool ar724x_pci_link_up;
+struct ar724x_pci_controller {
+ void __iomem *devcfg_base;
+ void __iomem *ctrl_base;
-static inline bool ar724x_pci_check_link(void)
+ int irq;
+
+ bool link_up;
+ bool bar0_is_cached;
+ u32 bar0_value;
+
+ spinlock_t lock;
+
+ struct pci_controller pci_controller;
+};
+
+static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
{
u32 reset;
- reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
+ reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET);
return reset & AR724X_PCI_RESET_LINK_UP;
}
+static inline struct ar724x_pci_controller *
+pci_bus_to_ar724x_controller(struct pci_bus *bus)
+{
+ struct pci_controller *hose;
+
+ hose = (struct pci_controller *) bus->sysdata;
+ return container_of(hose, struct ar724x_pci_controller, pci_controller);
+}
+
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
+ struct ar724x_pci_controller *apc;
unsigned long flags;
void __iomem *base;
u32 data;
- if (!ar724x_pci_link_up)
+ apc = pci_bus_to_ar724x_controller(bus);
+ if (!apc->link_up)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn)
return PCIBIOS_DEVICE_NOT_FOUND;
- base = ar724x_pci_devcfg_base;
+ base = apc->devcfg_base;
- spin_lock_irqsave(&ar724x_pci_lock, flags);
+ spin_lock_irqsave(&apc->lock, flags);
data = __raw_readl(base + (where & ~3));
switch (size) {
@@ -78,17 +97,17 @@ static int ar724x_pci_read(struct pci_bu
case 4:
break;
default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
- ar724x_pci_bar0_is_cached) {
+ apc->bar0_is_cached) {
/* use the cached value */
- *value = ar724x_pci_bar0_value;
+ *value = apc->bar0_value;
} else {
*value = data;
}
@@ -99,12 +118,14 @@ static int ar724x_pci_read(struct pci_bu
static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t value)
{
+ struct ar724x_pci_controller *apc;
unsigned long flags;
void __iomem *base;
u32 data;
int s;
- if (!ar724x_pci_link_up)
+ apc = pci_bus_to_ar724x_controller(bus);
+ if (!apc->link_up)
return PCIBIOS_DEVICE_NOT_FOUND;
if (devfn)
@@ -122,18 +143,18 @@ static int ar724x_pci_write(struct pci_b
* BAR0 register in order to make the device memory
* accessible.
*/
- ar724x_pci_bar0_is_cached = true;
- ar724x_pci_bar0_value = value;
+ apc->bar0_is_cached = true;
+ apc->bar0_value = value;
value = AR7240_BAR0_WAR_VALUE;
} else {
- ar724x_pci_bar0_is_cached = false;
+ apc->bar0_is_cached = false;
}
}
- base = ar724x_pci_devcfg_base;
+ base = apc->devcfg_base;
- spin_lock_irqsave(&ar724x_pci_lock, flags);
+ spin_lock_irqsave(&apc->lock, flags);
data = __raw_readl(base + (where & ~3));
switch (size) {
@@ -151,7 +172,7 @@ static int ar724x_pci_write(struct pci_b
data = value;
break;
default:
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_BAD_REGISTER_NUMBER;
}
@@ -159,7 +180,7 @@ static int ar724x_pci_write(struct pci_b
__raw_writel(data, base + (where & ~3));
/* flush write */
__raw_readl(base + (where & ~3));
- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
@@ -183,18 +204,14 @@ static struct resource ar724x_mem_resour
.flags = IORESOURCE_MEM,
};
-static struct pci_controller ar724x_pci_controller = {
- .pci_ops = &ar724x_pci_ops,
- .io_resource = &ar724x_io_resource,
- .mem_resource = &ar724x_mem_resource,
-};
-
static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
{
+ struct ar724x_pci_controller *apc;
void __iomem *base;
u32 pending;
- base = ar724x_pci_ctrl_base;
+ apc = irq_get_handler_data(irq);
+ base = apc->ctrl_base;
pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
__raw_readl(base + AR724X_PCI_REG_INT_MASK);
@@ -208,10 +225,12 @@ static void ar724x_pci_irq_handler(unsig
static void ar724x_pci_irq_unmask(struct irq_data *d)
{
+ struct ar724x_pci_controller *apc;
void __iomem *base;
u32 t;
- base = ar724x_pci_ctrl_base;
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
switch (d->irq) {
case ATH79_PCI_IRQ(0):
@@ -225,10 +244,12 @@ static void ar724x_pci_irq_unmask(struct
static void ar724x_pci_irq_mask(struct irq_data *d)
{
+ struct ar724x_pci_controller *apc;
void __iomem *base;
u32 t;
- base = ar724x_pci_ctrl_base;
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
switch (d->irq) {
case ATH79_PCI_IRQ(0):
@@ -255,12 +276,12 @@ static struct irq_chip ar724x_pci_irq_ch
.irq_mask_ack = ar724x_pci_irq_mask,
};
-static void __devinit ar724x_pci_irq_init(int irq)
+static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
{
void __iomem *base;
int i;
- base = ar724x_pci_ctrl_base;
+ base = apc->ctrl_base;
__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
@@ -268,45 +289,59 @@ static void __devinit ar724x_pci_irq_ini
BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
for (i = ATH79_PCI_IRQ_BASE;
- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
+ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
handle_level_irq);
+ irq_set_chip_data(i, apc);
+ }
- irq_set_chained_handler(irq, ar724x_pci_irq_handler);
+ irq_set_handler_data(apc->irq, apc);
+ irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler);
}
static int __devinit ar724x_pci_probe(struct platform_device *pdev)
{
+ struct ar724x_pci_controller *apc;
struct resource *res;
- int irq;
+
+ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
+ GFP_KERNEL);
+ if (!apc)
+ return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
if (!res)
return -EINVAL;
- ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
- if (ar724x_pci_ctrl_base == NULL)
+ apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (apc->ctrl_base == NULL)
return -EBUSY;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
if (!res)
return -EINVAL;
- ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!ar724x_pci_devcfg_base)
+ apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!apc->devcfg_base)
return -EBUSY;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ apc->irq = platform_get_irq(pdev, 0);
+ if (apc->irq < 0)
return -EINVAL;
- ar724x_pci_link_up = ar724x_pci_check_link();
- if (!ar724x_pci_link_up)
+ spin_lock_init(&apc->lock);
+
+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
+ apc->pci_controller.io_resource = &ar724x_io_resource;
+ apc->pci_controller.mem_resource = &ar724x_mem_resource;
+
+ apc->link_up = ar724x_pci_check_link(apc);
+ if (!apc->link_up)
dev_warn(&pdev->dev, "PCIe link is down\n");
- ar724x_pci_irq_init(irq);
+ ar724x_pci_irq_init(apc);
- register_pci_controller(&ar724x_pci_controller);
+ register_pci_controller(&apc->pci_controller);
return 0;
}

View file

@ -1,131 +0,0 @@
From f1c3a7dadf7b77809cda7f77df4b1ba3b24fbfa3 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 27 Jun 2012 10:12:50 +0200
Subject: [PATCH 11/34] MIPS: pci-ar724x: remove static PCI resources
Get those from the platform device instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/pci.c | 21 ++++++++++++++++++++-
arch/mips/pci/pci-ar724x.c | 40 ++++++++++++++++++++++++----------------
2 files changed, 44 insertions(+), 17 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -137,10 +137,13 @@ static struct platform_device *
ath79_register_pci_ar724x(int id,
unsigned long cfg_base,
unsigned long ctrl_base,
+ unsigned long mem_base,
+ unsigned long mem_size,
+ unsigned long io_base,
int irq)
{
struct platform_device *pdev;
- struct resource res[3];
+ struct resource res[5];
memset(res, 0, sizeof(res));
@@ -158,6 +161,16 @@ ath79_register_pci_ar724x(int id,
res[2].start = irq;
res[2].end = irq;
+ res[3].name = "mem_base";
+ res[3].flags = IORESOURCE_MEM;
+ res[3].start = mem_base;
+ res[3].end = mem_base + mem_size - 1;
+
+ res[4].name = "io_base";
+ res[4].flags = IORESOURCE_IO;
+ res[4].start = io_base;
+ res[4].end = io_base;
+
pdev = platform_device_register_simple("ar724x-pci", id,
res, ARRAY_SIZE(res));
return pdev;
@@ -173,6 +186,9 @@ int __init ath79_register_pci(void)
pdev = ath79_register_pci_ar724x(-1,
AR724X_PCI_CFG_BASE,
AR724X_PCI_CTRL_BASE,
+ AR724X_PCI_MEM_BASE,
+ AR724X_PCI_MEM_SIZE,
+ 0,
ATH79_CPU_IRQ_IP2);
} else if (soc_is_ar9342() ||
soc_is_ar9344()) {
@@ -185,6 +201,9 @@ int __init ath79_register_pci(void)
pdev = ath79_register_pci_ar724x(-1,
AR724X_PCI_CFG_BASE,
AR724X_PCI_CTRL_BASE,
+ AR724X_PCI_MEM_BASE,
+ AR724X_PCI_MEM_SIZE,
+ 0,
ATH79_IP2_IRQ(0));
} else {
/* No PCI support */
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -42,6 +42,8 @@ struct ar724x_pci_controller {
spinlock_t lock;
struct pci_controller pci_controller;
+ struct resource io_res;
+ struct resource mem_res;
};
static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
@@ -190,20 +192,6 @@ static struct pci_ops ar724x_pci_ops = {
.write = ar724x_pci_write,
};
-static struct resource ar724x_io_resource = {
- .name = "PCI IO space",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource ar724x_mem_resource = {
- .name = "PCI memory space",
- .start = AR724X_PCI_MEM_BASE,
- .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct ar724x_pci_controller *apc;
@@ -331,9 +319,29 @@ static int __devinit ar724x_pci_probe(st
spin_lock_init(&apc->lock);
+ res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+ if (!res)
+ return -EINVAL;
+
+ apc->io_res.parent = res;
+ apc->io_res.name = "PCI IO space";
+ apc->io_res.start = res->start;
+ apc->io_res.end = res->end;
+ apc->io_res.flags = IORESOURCE_IO;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+ if (!res)
+ return -EINVAL;
+
+ apc->mem_res.parent = res;
+ apc->mem_res.name = "PCI memory space";
+ apc->mem_res.start = res->start;
+ apc->mem_res.end = res->end;
+ apc->mem_res.flags = IORESOURCE_MEM;
+
apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &ar724x_io_resource;
- apc->pci_controller.mem_resource = &ar724x_mem_resource;
+ apc->pci_controller.io_resource = &apc->io_res;
+ apc->pci_controller.mem_resource = &apc->mem_res;
apc->link_up = ar724x_pci_check_link(apc);
if (!apc->link_up)

View file

@ -1,110 +0,0 @@
From d258929cd4c8c495f619f0e66d9d1c23f3f9246f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 26 Jun 2012 11:59:45 +0200
Subject: [PATCH 12/34] MIPS: pci-ar724x: use per-controller IRQ base
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar724x.c | 31 +++++++++++++++++++++----------
1 files changed, 21 insertions(+), 10 deletions(-)
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -34,6 +34,7 @@ struct ar724x_pci_controller {
void __iomem *ctrl_base;
int irq;
+ int irq_base;
bool link_up;
bool bar0_is_cached;
@@ -205,7 +206,7 @@ static void ar724x_pci_irq_handler(unsig
__raw_readl(base + AR724X_PCI_REG_INT_MASK);
if (pending & AR724X_PCI_INT_DEV0)
- generic_handle_irq(ATH79_PCI_IRQ(0));
+ generic_handle_irq(apc->irq_base + 0);
else
spurious_interrupt();
@@ -215,13 +216,15 @@ static void ar724x_pci_irq_unmask(struct
{
struct ar724x_pci_controller *apc;
void __iomem *base;
+ int offset;
u32 t;
apc = irq_data_get_irq_chip_data(d);
base = apc->ctrl_base;
+ offset = apc->irq_base - d->irq;
- switch (d->irq) {
- case ATH79_PCI_IRQ(0):
+ switch (offset) {
+ case 0:
t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
__raw_writel(t | AR724X_PCI_INT_DEV0,
base + AR724X_PCI_REG_INT_MASK);
@@ -234,13 +237,15 @@ static void ar724x_pci_irq_mask(struct i
{
struct ar724x_pci_controller *apc;
void __iomem *base;
+ int offset;
u32 t;
apc = irq_data_get_irq_chip_data(d);
base = apc->ctrl_base;
+ offset = apc->irq_base - d->irq;
- switch (d->irq) {
- case ATH79_PCI_IRQ(0):
+ switch (offset) {
+ case 0:
t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
__raw_writel(t & ~AR724X_PCI_INT_DEV0,
base + AR724X_PCI_REG_INT_MASK);
@@ -264,7 +269,8 @@ static struct irq_chip ar724x_pci_irq_ch
.irq_mask_ack = ar724x_pci_irq_mask,
};
-static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
+static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
+ int id)
{
void __iomem *base;
int i;
@@ -274,10 +280,10 @@ static void __devinit ar724x_pci_irq_ini
__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
+ apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
- for (i = ATH79_PCI_IRQ_BASE;
- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
+ for (i = apc->irq_base;
+ i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
handle_level_irq);
irq_set_chip_data(i, apc);
@@ -291,6 +297,11 @@ static int __devinit ar724x_pci_probe(st
{
struct ar724x_pci_controller *apc;
struct resource *res;
+ int id;
+
+ id = pdev->id;
+ if (id == -1)
+ id = 0;
apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
GFP_KERNEL);
@@ -347,7 +358,7 @@ static int __devinit ar724x_pci_probe(st
if (!apc->link_up)
dev_warn(&pdev->dev, "PCIe link is down\n");
- ar724x_pci_irq_init(apc);
+ ar724x_pci_irq_init(apc, id);
register_pci_controller(&apc->pci_controller);

View file

@ -1,165 +0,0 @@
From 93824983ceb36d4ce1f4a644031ec6fb5f332f1d Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 26 Jun 2012 15:14:47 +0200
Subject: [PATCH 13/34] MIPS: pci-ar724x: setup command register of the PCI controller
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/pci.c | 10 +++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +
arch/mips/pci/pci-ar724x.c | 63 ++++++++++++++++++++++++
3 files changed, 74 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -137,13 +137,14 @@ static struct platform_device *
ath79_register_pci_ar724x(int id,
unsigned long cfg_base,
unsigned long ctrl_base,
+ unsigned long crp_base,
unsigned long mem_base,
unsigned long mem_size,
unsigned long io_base,
int irq)
{
struct platform_device *pdev;
- struct resource res[5];
+ struct resource res[6];
memset(res, 0, sizeof(res));
@@ -171,6 +172,11 @@ ath79_register_pci_ar724x(int id,
res[4].start = io_base;
res[4].end = io_base;
+ res[5].name = "crp_base";
+ res[5].flags = IORESOURCE_MEM;
+ res[5].start = crp_base;
+ res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
+
pdev = platform_device_register_simple("ar724x-pci", id,
res, ARRAY_SIZE(res));
return pdev;
@@ -186,6 +192,7 @@ int __init ath79_register_pci(void)
pdev = ath79_register_pci_ar724x(-1,
AR724X_PCI_CFG_BASE,
AR724X_PCI_CTRL_BASE,
+ AR724X_PCI_CRP_BASE,
AR724X_PCI_MEM_BASE,
AR724X_PCI_MEM_SIZE,
0,
@@ -201,6 +208,7 @@ int __init ath79_register_pci(void)
pdev = ath79_register_pci_ar724x(-1,
AR724X_PCI_CFG_BASE,
AR724X_PCI_CTRL_BASE,
+ AR724X_PCI_CRP_BASE,
AR724X_PCI_MEM_BASE,
AR724X_PCI_MEM_SIZE,
0,
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -67,6 +67,8 @@
#define AR724X_PCI_CFG_BASE 0x14000000
#define AR724X_PCI_CFG_SIZE 0x1000
+#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000)
+#define AR724X_PCI_CRP_SIZE 0x1000
#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
#define AR724X_PCI_CTRL_SIZE 0x100
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -29,9 +29,17 @@
#define AR7240_BAR0_WAR_VALUE 0xffff
+#define AR724X_PCI_CMD_INIT (PCI_COMMAND_MEMORY | \
+ PCI_COMMAND_MASTER | \
+ PCI_COMMAND_INVALIDATE | \
+ PCI_COMMAND_PARITY | \
+ PCI_COMMAND_SERR | \
+ PCI_COMMAND_FAST_BACK)
+
struct ar724x_pci_controller {
void __iomem *devcfg_base;
void __iomem *ctrl_base;
+ void __iomem *crp_base;
int irq;
int irq_base;
@@ -64,6 +72,51 @@ pci_bus_to_ar724x_controller(struct pci_
return container_of(hose, struct ar724x_pci_controller, pci_controller);
}
+static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
+ int where, int size, u32 value)
+{
+ unsigned long flags;
+ void __iomem *base;
+ u32 data;
+ int s;
+
+ WARN_ON(where & (size - 1));
+
+ if (!apc->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ base = apc->crp_base;
+
+ spin_lock_irqsave(&apc->lock, flags);
+ data = __raw_readl(base + (where & ~3));
+
+ switch (size) {
+ case 1:
+ s = ((where & 3) * 8);
+ data &= ~(0xff << s);
+ data |= ((value & 0xff) << s);
+ break;
+ case 2:
+ s = ((where & 2) * 8);
+ data &= ~(0xffff << s);
+ data |= ((value & 0xffff) << s);
+ break;
+ case 4:
+ data = value;
+ break;
+ default:
+ spin_unlock_irqrestore(&apc->lock, flags);
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ __raw_writel(data, base + (where & ~3));
+ /* flush write */
+ __raw_readl(base + (where & ~3));
+ spin_unlock_irqrestore(&apc->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, uint32_t *value)
{
@@ -324,6 +377,14 @@ static int __devinit ar724x_pci_probe(st
if (!apc->devcfg_base)
return -EBUSY;
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
+ if (!res)
+ return -EINVAL;
+
+ apc->crp_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (apc->crp_base == NULL)
+ return -EBUSY;
+
apc->irq = platform_get_irq(pdev, 0);
if (apc->irq < 0)
return -EINVAL;
@@ -360,6 +421,8 @@ static int __devinit ar724x_pci_probe(st
ar724x_pci_irq_init(apc, id);
+ ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT);
+
register_pci_controller(&apc->pci_controller);
return 0;

View file

@ -1,228 +0,0 @@
From 6c3ef689e4364dca74eaaecd72384be09e5a6bc8 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 25 Jun 2012 09:19:08 +0200
Subject: [PATCH 14/34] MIPS: pci-ar71xx: use dynamically allocated PCI controller structure
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar71xx.c | 84 +++++++++++++++++++++++++++----------------
1 files changed, 53 insertions(+), 31 deletions(-)
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
@@ -48,8 +49,12 @@
#define AR71XX_PCI_IRQ_COUNT 5
-static DEFINE_SPINLOCK(ar71xx_pci_lock);
-static void __iomem *ar71xx_pcicfg_base;
+struct ar71xx_pci_controller {
+ void __iomem *cfg_base;
+ spinlock_t lock;
+ int irq;
+ struct pci_controller pci_ctrl;
+};
/* Byte lane enable bits */
static const u8 ar71xx_pci_ble_table[4][4] = {
@@ -92,9 +97,18 @@ static inline u32 ar71xx_pci_bus_addr(st
return ret;
}
-static int ar71xx_pci_check_error(int quiet)
+static inline struct ar71xx_pci_controller *
+pci_bus_to_ar71xx_controller(struct pci_bus *bus)
{
- void __iomem *base = ar71xx_pcicfg_base;
+ struct pci_controller *hose;
+
+ hose = (struct pci_controller *) bus->sysdata;
+ return container_of(hose, struct ar71xx_pci_controller, pci_ctrl);
+}
+
+static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet)
+{
+ void __iomem *base = apc->cfg_base;
u32 pci_err;
u32 ahb_err;
@@ -129,9 +143,10 @@ static int ar71xx_pci_check_error(int qu
return !!(ahb_err | pci_err);
}
-static inline void ar71xx_pci_local_write(int where, int size, u32 value)
+static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc,
+ int where, int size, u32 value)
{
- void __iomem *base = ar71xx_pcicfg_base;
+ void __iomem *base = apc->cfg_base;
u32 ad_cbe;
value = value << (8 * (where & 3));
@@ -147,7 +162,8 @@ static inline int ar71xx_pci_set_cfgaddr
unsigned int devfn,
int where, int size, u32 cmd)
{
- void __iomem *base = ar71xx_pcicfg_base;
+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+ void __iomem *base = apc->cfg_base;
u32 addr;
addr = ar71xx_pci_bus_addr(bus, devfn, where);
@@ -156,13 +172,14 @@ static inline int ar71xx_pci_set_cfgaddr
__raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
base + AR71XX_PCI_REG_CFG_CBE);
- return ar71xx_pci_check_error(1);
+ return ar71xx_pci_check_error(apc, 1);
}
static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *value)
{
- void __iomem *base = ar71xx_pcicfg_base;
+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+ void __iomem *base = apc->cfg_base;
unsigned long flags;
u32 data;
int err;
@@ -171,7 +188,7 @@ static int ar71xx_pci_read_config(struct
ret = PCIBIOS_SUCCESSFUL;
data = ~0;
- spin_lock_irqsave(&ar71xx_pci_lock, flags);
+ spin_lock_irqsave(&apc->lock, flags);
err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
AR71XX_PCI_CFG_CMD_READ);
@@ -180,7 +197,7 @@ static int ar71xx_pci_read_config(struct
else
data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
*value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
@@ -190,7 +207,8 @@ static int ar71xx_pci_read_config(struct
static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 value)
{
- void __iomem *base = ar71xx_pcicfg_base;
+ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
+ void __iomem *base = apc->cfg_base;
unsigned long flags;
int err;
int ret;
@@ -198,7 +216,7 @@ static int ar71xx_pci_write_config(struc
value = value << (8 * (where & 3));
ret = PCIBIOS_SUCCESSFUL;
- spin_lock_irqsave(&ar71xx_pci_lock, flags);
+ spin_lock_irqsave(&apc->lock, flags);
err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
AR71XX_PCI_CFG_CMD_WRITE);
@@ -207,7 +225,7 @@ static int ar71xx_pci_write_config(struc
else
__raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+ spin_unlock_irqrestore(&apc->lock, flags);
return ret;
}
@@ -231,12 +249,6 @@ static struct resource ar71xx_pci_mem_re
.flags = IORESOURCE_MEM
};
-static struct pci_controller ar71xx_pci_controller = {
- .pci_ops = &ar71xx_pci_ops,
- .mem_resource = &ar71xx_pci_mem_resource,
- .io_resource = &ar71xx_pci_io_resource,
-};
-
static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *base = ath79_reset_base;
@@ -294,7 +306,7 @@ static struct irq_chip ar71xx_pci_irq_ch
.irq_mask_ack = ar71xx_pci_irq_mask,
};
-static __devinit void ar71xx_pci_irq_init(int irq)
+static __devinit void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
{
void __iomem *base = ath79_reset_base;
int i;
@@ -309,7 +321,7 @@ static __devinit void ar71xx_pci_irq_ini
irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
handle_level_irq);
- irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
+ irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler);
}
static __devinit void ar71xx_pci_reset(void)
@@ -336,20 +348,26 @@ static __devinit void ar71xx_pci_reset(v
static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
{
+ struct ar71xx_pci_controller *apc;
struct resource *res;
- int irq;
u32 t;
+ apc = kzalloc(sizeof(struct ar71xx_pci_controller), GFP_KERNEL);
+ if (!apc)
+ return -ENOMEM;
+
+ spin_lock_init(&apc->lock);
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
if (!res)
return -EINVAL;
- ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!ar71xx_pcicfg_base)
+ apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!apc->cfg_base)
return -ENOMEM;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ apc->irq = platform_get_irq(pdev, 0);
+ if (apc->irq < 0)
return -EINVAL;
ar71xx_pci_reset();
@@ -357,14 +375,18 @@ static int __devinit ar71xx_pci_probe(st
/* setup COMMAND register */
t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
+ ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t);
/* clear bus errors */
- ar71xx_pci_check_error(1);
+ ar71xx_pci_check_error(apc, 1);
+
+ ar71xx_pci_irq_init(apc);
- ar71xx_pci_irq_init(irq);
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+ apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
+ apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
- register_pci_controller(&ar71xx_pci_controller);
+ register_pci_controller(&apc->pci_ctrl);
return 0;
}

View file

@ -1,70 +0,0 @@
From 7dc3ccb5dc972b06c41b309653d132beaaedeb37 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 25 Jun 2012 09:52:23 +0200
Subject: [PATCH 15/34] MIPS: pci-ar71xx: remove static PCI controller resources
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/pci/pci-ar71xx.c | 30 ++++++++++++++----------------
1 files changed, 14 insertions(+), 16 deletions(-)
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -54,6 +54,8 @@ struct ar71xx_pci_controller {
spinlock_t lock;
int irq;
struct pci_controller pci_ctrl;
+ struct resource io_res;
+ struct resource mem_res;
};
/* Byte lane enable bits */
@@ -235,20 +237,6 @@ static struct pci_ops ar71xx_pci_ops = {
.write = ar71xx_pci_write_config,
};
-static struct resource ar71xx_pci_io_resource = {
- .name = "PCI IO space",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource ar71xx_pci_mem_resource = {
- .name = "PCI memory space",
- .start = AR71XX_PCI_MEM_BASE,
- .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *base = ath79_reset_base;
@@ -370,6 +358,16 @@ static int __devinit ar71xx_pci_probe(st
if (apc->irq < 0)
return -EINVAL;
+ apc->io_res.name = "PCI IO space";
+ apc->io_res.start = 0;
+ apc->io_res.end = 0;
+ apc->io_res.flags = IORESOURCE_IO;
+
+ apc->mem_res.name = "PCI memory space";
+ apc->mem_res.start = AR71XX_PCI_MEM_BASE;
+ apc->mem_res.end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
+ apc->mem_res.flags = IORESOURCE_MEM;
+
ar71xx_pci_reset();
/* setup COMMAND register */
@@ -383,8 +381,8 @@ static int __devinit ar71xx_pci_probe(st
ar71xx_pci_irq_init(apc);
apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
- apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
+ apc->pci_ctrl.mem_resource = &apc->mem_res;
+ apc->pci_ctrl.io_resource = &apc->io_res;
register_pci_controller(&apc->pci_ctrl);

View file

@ -1,31 +0,0 @@
From 114df1e368b8503de1fe63e97d6eea521eecfbe4 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:40:38 +0200
Subject: [PATCH 16/34] MIPS: ath79: add early printk support for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/early_printk.c | 1 +
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -74,6 +74,7 @@ static void prom_putchar_init(void)
case REV_ID_MAJOR_AR9341:
case REV_ID_MAJOR_AR9342:
case REV_ID_MAJOR_AR9344:
+ case REV_ID_MAJOR_QCA9558:
_prom_putchar = prom_putchar_ar71xx;
break;
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -370,6 +370,7 @@
#define REV_ID_MAJOR_AR9341 0x0120
#define REV_ID_MAJOR_AR9342 0x1120
#define REV_ID_MAJOR_AR9344 0x2120
+#define REV_ID_MAJOR_QCA9558 0x1130
#define AR71XX_REV_ID_MINOR_MASK 0x3
#define AR71XX_REV_ID_MINOR_AR7130 0x0

View file

@ -1,91 +0,0 @@
From 3c3c0eccf63b12fea98fd0eb65d0ccf69a7c5a57 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:42:16 +0200
Subject: [PATCH 17/34] MIPS: ath79: add SoC detection code for the QCA9558 SoC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/Kconfig | 4 ++++
arch/mips/ath79/setup.c | 12 +++++++++++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
arch/mips/include/asm/mach-ath79/ath79.h | 11 +++++++++++
4 files changed, 28 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -88,6 +88,10 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
+config SOC_QCA955X
+ select USB_ARCH_HAS_EHCI
+ def_bool n
+
config PCI_AR724X
def_bool n
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -164,13 +164,23 @@ static void __init ath79_detect_sys_type
rev = id & AR934X_REV_ID_REVISION_MASK;
break;
+ case REV_ID_MAJOR_QCA9558:
+ ath79_soc = ATH79_SOC_QCA9558;
+ chip = "9558";
+ rev = id & AR944X_REV_ID_REVISION_MASK;
+ break;
+
default:
panic("ath79: unknown SoC, id:0x%08x", id);
}
ath79_soc_rev = rev;
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+ if (soc_is_qca955x())
+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+ chip, rev);
+ else
+ sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
pr_info("SoC: %s\n", ath79_sys_type);
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -391,6 +391,8 @@
#define AR934X_REV_ID_REVISION_MASK 0xf
+#define AR944X_REV_ID_REVISION_MASK 0xf
+
/*
* SPI block
*/
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -32,6 +32,7 @@ enum ath79_soc_type {
ATH79_SOC_AR9341,
ATH79_SOC_AR9342,
ATH79_SOC_AR9344,
+ ATH79_SOC_QCA9558,
};
extern enum ath79_soc_type ath79_soc;
@@ -98,6 +99,16 @@ static inline int soc_is_ar934x(void)
return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
}
+static inline int soc_is_qca9558(void)
+{
+ return ath79_soc == ATH79_SOC_QCA9558;
+}
+
+static inline int soc_is_qca955x(void)
+{
+ return soc_is_qca9558();
+}
+
extern void __iomem *ath79_ddr_base;
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;

View file

@ -1,167 +0,0 @@
From f465a16766a015a31d4e83af1ad62cc718d64f5a Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:43:08 +0200
Subject: [PATCH 18/34] MIPS: ath79: add clock setup for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 39 ++++++++++++
2 files changed, 117 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo
iounmap(dpll_base);
}
+static void __init qca955x_clocks_init(void)
+{
+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+ u32 cpu_pll, ddr_pll;
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
+ if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40)
+ ath79_ref_clk.rate = 40 * 1000 * 1000;
+ else
+ ath79_ref_clk.rate = 25 * 1000 * 1000;
+
+ pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_REFDIV_MASK;
+ nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_NINT_MASK;
+ frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
+
+ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
+ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
+ cpu_pll /= (1 << out_div);
+
+ pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ QCA955X_PLL_DDR_CONFIG_REFDIV_MASK;
+ nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ QCA955X_PLL_DDR_CONFIG_NINT_MASK;
+ frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
+
+ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
+ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
+ ddr_pll /= (1 << out_div);
+
+ clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+ else
+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+ QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+ else
+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+ QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
+ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+ else
+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+
+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
+ ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
void __init ath79_clocks_init(void)
{
if (soc_is_ar71xx())
@@ -307,6 +383,8 @@ void __init ath79_clocks_init(void)
ar933x_clocks_init();
else if (soc_is_ar934x())
ar934x_clocks_init();
+ else if (soc_is_qca955x())
+ qca955x_clocks_init();
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -225,6 +225,41 @@
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+#define QCA955X_PLL_CPU_CONFIG_REG 0x00
+#define QCA955X_PLL_DDR_CONFIG_REG 0x04
+#define QCA955X_PLL_CLK_CTRL_REG 0x08
+
+#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6
+#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f
+#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
+#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
+#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
+
+#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
+#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
+#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10
+#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f
+#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
+#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
+#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
+
+#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
+#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
+#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
+#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
+#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
+#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
+#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
+#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
+#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
/*
* USB_CONFIG block
*/
@@ -264,6 +299,8 @@
#define AR934X_RESET_REG_BOOTSTRAP 0xb0
#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
+
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
#define MISC_INT_TIMER3 BIT(9)
@@ -341,6 +378,8 @@
#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
#define AR934X_BOOTSTRAP_DDR1 BIT(0)
+#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
+
#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)

View file

@ -1,239 +0,0 @@
From 5d0de52f8e36916485a61b820916b71b5d918e6f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:44:23 +0200
Subject: [PATCH 19/34] MIPS: ath79: add IRQ handling code for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/irq.c | 110 ++++++++++++++++++++++--
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 +++++++
arch/mips/include/asm/mach-ath79/irq.h | 9 ++-
3 files changed, 142 insertions(+), 9 deletions(-)
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -130,7 +130,10 @@ static void __init ath79_misc_irq_init(v
if (soc_is_ar71xx() || soc_is_ar913x())
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
- else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
+ else if (soc_is_ar724x() ||
+ soc_is_ar933x() ||
+ soc_is_ar934x() ||
+ soc_is_qca955x())
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
else
BUG();
@@ -177,6 +180,88 @@ static void ar934x_ip2_irq_init(void)
irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
}
+static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ u32 status;
+
+ disable_irq_nosync(irq);
+
+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+ status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
+
+ if (status == 0) {
+ spurious_interrupt();
+ goto enable;
+ }
+
+ if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
+ /* TODO: flush DDR? */
+ generic_handle_irq(ATH79_IP2_IRQ(0));
+ }
+
+ if (status & QCA955X_EXT_INT_WMAC_ALL) {
+ /* TODO: flsuh DDR? */
+ generic_handle_irq(ATH79_IP2_IRQ(1));
+ }
+
+enable:
+ enable_irq(irq);
+}
+
+static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ u32 status;
+
+ disable_irq_nosync(irq);
+
+ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+ status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
+ QCA955X_EXT_INT_USB1 |
+ QCA955X_EXT_INT_USB2;
+
+ if (status == 0) {
+ spurious_interrupt();
+ goto enable;
+ }
+
+ if (status & QCA955X_EXT_INT_USB1) {
+ /* TODO: flush DDR? */
+ generic_handle_irq(ATH79_IP3_IRQ(0));
+ }
+
+ if (status & QCA955X_EXT_INT_USB2) {
+ /* TODO: flsuh DDR? */
+ generic_handle_irq(ATH79_IP3_IRQ(1));
+ }
+
+ if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
+ /* TODO: flush DDR? */
+ generic_handle_irq(ATH79_IP3_IRQ(2));
+ }
+
+enable:
+ enable_irq(irq);
+}
+
+static void qca955x_irq_init(void)
+{
+ int i;
+
+ for (i = ATH79_IP2_IRQ_BASE;
+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+ irq_set_chip_and_handler(i, &dummy_irq_chip,
+ handle_level_irq);
+
+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, qca955x_ip2_irq_dispatch);
+
+ for (i = ATH79_IP3_IRQ_BASE;
+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+ irq_set_chip_and_handler(i, &dummy_irq_chip,
+ handle_level_irq);
+
+ irq_set_chained_handler(ATH79_CPU_IRQ_IP3, qca955x_ip3_irq_dispatch);
+}
+
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending;
@@ -212,6 +297,17 @@ asmlinkage void plat_irq_dispatch(void)
* Issue a flush in the handlers to ensure that the driver sees
* the update.
*/
+
+static void ath79_default_ip2_handler(void)
+{
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+}
+
+static void ath79_default_ip3_handler(void)
+{
+ do_IRQ(ATH79_CPU_IRQ_USB);
+}
+
static void ar71xx_ip2_handler(void)
{
ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
@@ -236,11 +332,6 @@ static void ar933x_ip2_handler(void)
do_IRQ(ATH79_CPU_IRQ_IP2);
}
-static void ar934x_ip2_handler(void)
-{
- do_IRQ(ATH79_CPU_IRQ_IP2);
-}
-
static void ar71xx_ip3_handler(void)
{
ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
@@ -286,8 +377,11 @@ void __init arch_init_irq(void)
ath79_ip2_handler = ar933x_ip2_handler;
ath79_ip3_handler = ar933x_ip3_handler;
} else if (soc_is_ar934x()) {
- ath79_ip2_handler = ar934x_ip2_handler;
+ ath79_ip2_handler = ath79_default_ip2_handler;
ath79_ip3_handler = ar934x_ip3_handler;
+ } else if (soc_is_qca955x()) {
+ ath79_ip2_handler = ath79_default_ip2_handler;
+ ath79_ip3_handler = ath79_default_ip3_handler;
} else {
BUG();
}
@@ -298,4 +392,6 @@ void __init arch_init_irq(void)
if (soc_is_ar934x())
ar934x_ip2_irq_init();
+ else if (soc_is_qca955x())
+ qca955x_irq_init();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -300,6 +300,7 @@
#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
+#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
@@ -398,6 +399,37 @@
AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
AR934X_PCIE_WMAC_INT_PCIE_RC3)
+#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
+#define QCA955X_EXT_INT_WMAC_TX BIT(1)
+#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
+#define QCA955X_EXT_INT_WMAC_RXHP BIT(3)
+#define QCA955X_EXT_INT_PCIE_RC1 BIT(4)
+#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5)
+#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6)
+#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7)
+#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8)
+#define QCA955X_EXT_INT_PCIE_RC2 BIT(12)
+#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13)
+#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14)
+#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15)
+#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16)
+#define QCA955X_EXT_INT_USB1 BIT(24)
+#define QCA955X_EXT_INT_USB2 BIT(28)
+
+#define QCA955X_EXT_INT_WMAC_ALL \
+ (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
+ QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
+
+#define QCA955X_EXT_INT_PCIE_RC1_ALL \
+ (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
+ QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
+ QCA955X_EXT_INT_PCIE_RC1_INT3)
+
+#define QCA955X_EXT_INT_PCIE_RC2_ALL \
+ (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
+ QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+ QCA955X_EXT_INT_PCIE_RC2_INT3)
+
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -10,7 +10,7 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
-#define NR_IRQS 48
+#define NR_IRQS 51
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
@@ -23,8 +23,13 @@
#define ATH79_IP2_IRQ_COUNT 2
#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
+#define ATH79_IP3_IRQ_BASE (ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT)
+#define ATH79_IP3_IRQ_COUNT 3
+#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x))
+
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
-#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
+#define ATH79_CPU_IRQ_IP3 (MIPS_CPU_IRQ_BASE + 3)
+#define ATH79_CPU_IRQ_USB ATH79_CPU_IRQ_IP3
#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
#define ATH79_CPU_IRQ_GE1 (MIPS_CPU_IRQ_BASE + 5)
#define ATH79_CPU_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6)

View file

@ -1,39 +0,0 @@
From c9a552f3007f0621b2440ae17bad816578299e52 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:45:27 +0200
Subject: [PATCH 20/34] MIPS: ath79: add GPIO setup code for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/gpio.c | 4 +++-
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
2 files changed, 4 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -198,12 +198,14 @@ void __init ath79_gpio_init(void)
ath79_gpio_count = AR933X_GPIO_COUNT;
else if (soc_is_ar934x())
ath79_gpio_count = AR934X_GPIO_COUNT;
+ else if (soc_is_qca955x())
+ ath79_gpio_count = QCA955X_GPIO_COUNT;
else
BUG();
ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
ath79_gpio_chip.ngpio = ath79_gpio_count;
- if (soc_is_ar934x()) {
+ if (soc_is_ar934x() || soc_is_qca955x()) {
ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -507,6 +507,7 @@
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
+#define QCA955X_GPIO_COUNT 24
/*
* SRIF block

View file

@ -1,31 +0,0 @@
From 68368e80b4db83afe39664a7d43c8b5c7b8ac3b4 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:49:33 +0200
Subject: [PATCH 21/34] MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set,clear}
---
arch/mips/ath79/common.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -70,7 +70,8 @@ void ath79_device_reset_set(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
+ else if (soc_is_ar934x() ||
+ soc_is_qca955x())
reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();
@@ -96,7 +97,8 @@ void ath79_device_reset_clear(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
+ else if (soc_is_ar934x() ||
+ soc_is_qca955x())
reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();

View file

@ -1,22 +0,0 @@
From f7d7b362b51c51c1ae80bb7ade2039d6f74d4070 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:46:26 +0200
Subject: [PATCH 22/34] MIPS: ath79: register UART for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/dev-common.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -90,7 +90,8 @@ void __init ath79_register_uart(void)
if (soc_is_ar71xx() ||
soc_is_ar724x() ||
soc_is_ar913x() ||
- soc_is_ar934x()) {
+ soc_is_ar934x() ||
+ soc_is_qca955x()) {
ath79_uart_data[0].uartclk = clk_get_rate(clk);
platform_device_register(&ath79_uart_device);
} else if (soc_is_ar933x()) {

View file

@ -1,93 +0,0 @@
From e4ba5e2bffd1f373f57dd692233aa6b7b46ae76c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:47:35 +0200
Subject: [PATCH 23/34] MIPS: ath79: add USB controller registration code for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/dev-usb.c | 46 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++
2 files changed, 50 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/dev-usb.c
+++ b/arch/mips/ath79/dev-usb.c
@@ -75,6 +75,8 @@ static void __init ath79_usb_init_resour
unsigned long size,
int irq)
{
+ memset(res, 0, sizeof(res));
+
res[0].flags = IORESOURCE_MEM;
res[0].start = base;
res[0].end = base + size - 1;
@@ -219,6 +221,48 @@ static void __init ar934x_usb_setup(void
platform_device_register(&ath79_ehci_device);
}
+static void __init qca955x_usb_setup(void)
+{
+ struct platform_device *pdev;
+
+ ath79_usb_init_resource(ath79_ehci_resources,
+ QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+ ATH79_IP3_IRQ(0));
+
+ pdev = platform_device_register_resndata(NULL, "ehci-platform", 0,
+ ath79_ehci_resources,
+ ARRAY_SIZE(ath79_ehci_resources),
+ &ath79_ehci_pdata_v2,
+ sizeof(ath79_ehci_pdata_v2));
+ if (IS_ERR(pdev)) {
+ pr_err("Unable to register USB %d device, err=%d\n", 0,
+ (int) PTR_ERR(pdev));
+ return;
+ }
+
+ pdev->dev.dma_mask = &ath79_ehci_dmamask;
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ ath79_usb_init_resource(ath79_ehci_resources,
+ QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
+ ATH79_IP3_IRQ(1));
+
+ pdev = platform_device_register_resndata(NULL, "ehci-platform", 1,
+ ath79_ehci_resources,
+ ARRAY_SIZE(ath79_ehci_resources),
+ &ath79_ehci_pdata_v2,
+ sizeof(ath79_ehci_pdata_v2));
+
+ if (IS_ERR(pdev)) {
+ pr_err("Unable to register USB %d device, err=%d\n", 1,
+ (int) PTR_ERR(pdev));
+ return;
+ }
+
+ pdev->dev.dma_mask = &ath79_ehci_dmamask;
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+}
+
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
@@ -233,6 +277,8 @@ void __init ath79_register_usb(void)
ar933x_usb_setup();
else if (soc_is_ar934x())
ar934x_usb_setup();
+ else if (soc_is_qca955x())
+ qca955x_usb_setup();
else
BUG();
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -94,6 +94,10 @@
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define QCA955X_EHCI0_BASE 0x1b000000
+#define QCA955X_EHCI1_BASE 0x1b400000
+#define QCA955X_EHCI_SIZE 0x200
+
/*
* DDR_CTRL block
*/

View file

@ -1,70 +0,0 @@
From 0568e7f92ecf2bfd2af0a5c59b1249fef002c89f Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 3 Jul 2012 10:24:43 +0200
Subject: [PATCH 24/34] MIPS: ath79: add WMAC registration code for the QCA955X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/Kconfig | 2 +-
arch/mips/ath79/dev-wmac.c | 20 ++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
3 files changed, 23 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -108,7 +108,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
def_bool n
endif
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -116,6 +116,24 @@ static void ar934x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
}
+static void qca955x_wmac_setup(void)
+{
+ u32 t;
+
+ ath79_wmac_device.name = "qca955x_wmac";
+
+ ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
+ ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+
+ t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
+ if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
+ ath79_wmac_data.is_clk_25mhz = false;
+ else
+ ath79_wmac_data.is_clk_25mhz = true;
+}
+
void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
@@ -124,6 +142,8 @@ void __init ath79_register_wmac(u8 *cal_
ar933x_wmac_setup();
else if (soc_is_ar934x())
ar934x_wmac_setup();
+ else if (soc_is_qca955x())
+ qca955x_wmac_setup();
else
BUG();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -94,6 +94,8 @@
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+#define QCA955X_WMAC_SIZE 0x20000
#define QCA955X_EHCI0_BASE 0x1b000000
#define QCA955X_EHCI1_BASE 0x1b400000
#define QCA955X_EHCI_SIZE 0x200

View file

@ -1,34 +0,0 @@
From 12c68e4fccadc22a0470177141a57892a76e4a2b Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 15:33:16 +0200
Subject: [PATCH 25/34] MIPS: ath79: allow to specify bus number in PCI IRQ maps
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/pci.c | 4 +++-
arch/mips/ath79/pci.h | 1 +
2 files changed, 4 insertions(+), 1 deletions(-)
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -75,7 +75,9 @@ int __init pcibios_map_irq(const struct
const struct ath79_pci_irq *entry;
entry = &ath79_pci_irq_map[i];
- if (entry->slot == slot && entry->pin == pin) {
+ if (entry->bus == dev->bus->number &&
+ entry->slot == slot &&
+ entry->pin == pin) {
irq = entry->irq;
break;
}
--- a/arch/mips/ath79/pci.h
+++ b/arch/mips/ath79/pci.h
@@ -14,6 +14,7 @@
#define _ATH79_PCI_H
struct ath79_pci_irq {
+ int bus;
u8 slot;
u8 pin;
int irq;

View file

@ -1,103 +0,0 @@
From 8bb54348722216a1dd6905d9d031ebdaa3a544a4 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 23:05:20 +0200
Subject: [PATCH 26/34] MIPS: ath79: add PCI controller registration code for the QCA9558 SoC
---
arch/mips/ath79/Kconfig | 2 +
arch/mips/ath79/pci.c | 36 ++++++++++++++++++++++++
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 13 ++++++++
3 files changed, 51 insertions(+), 0 deletions(-)
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -90,6 +90,8 @@ config SOC_AR934X
config SOC_QCA955X
select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
+ select PCI_AR724X if PCI
def_bool n
config PCI_AR724X
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -49,6 +49,21 @@ static const struct ath79_pci_irq ar724x
}
};
+static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
+ {
+ .bus = 0,
+ .slot = 0,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ },
+ {
+ .bus = 1,
+ .slot = 0,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ },
+};
+
int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
{
int irq = -1;
@@ -64,6 +79,9 @@ int __init pcibios_map_irq(const struct
soc_is_ar9344()) {
ath79_pci_irq_map = ar724x_pci_irq_map;
ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+ } else if (soc_is_qca955x()) {
+ ath79_pci_irq_map = qca955x_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
} else {
pr_crit("pci %s: invalid irq map\n",
pci_name((struct pci_dev *) dev));
@@ -215,6 +233,24 @@ int __init ath79_register_pci(void)
AR724X_PCI_MEM_SIZE,
0,
ATH79_IP2_IRQ(0));
+ } else if (soc_is_qca9558()) {
+ pdev = ath79_register_pci_ar724x(0,
+ QCA955X_PCI_CFG_BASE0,
+ QCA955X_PCI_CTRL_BASE0,
+ QCA955X_PCI_CRP_BASE0,
+ QCA955X_PCI_MEM_BASE0,
+ QCA955X_PCI_MEM_SIZE,
+ 0,
+ ATH79_IP2_IRQ(0));
+
+ pdev = ath79_register_pci_ar724x(1,
+ QCA955X_PCI_CFG_BASE1,
+ QCA955X_PCI_CTRL_BASE1,
+ QCA955X_PCI_CRP_BASE1,
+ QCA955X_PCI_MEM_BASE1,
+ QCA955X_PCI_MEM_SIZE,
+ 1,
+ ATH79_IP3_IRQ(2));
} else {
/* No PCI support */
return -ENODEV;
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -94,6 +94,19 @@
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define QCA955X_PCI_MEM_BASE0 0x10000000
+#define QCA955X_PCI_MEM_BASE1 0x12000000
+#define QCA955X_PCI_MEM_SIZE 0x02000000
+#define QCA955X_PCI_CFG_BASE0 0x14000000
+#define QCA955X_PCI_CFG_BASE1 0x16000000
+#define QCA955X_PCI_CFG_SIZE 0x1000
+#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
+#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
+#define QCA955X_PCI_CRP_SIZE 0x1000
+#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
+#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
+#define QCA955X_PCI_CTRL_SIZE 0x100
+
#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define QCA955X_WMAC_SIZE 0x20000
#define QCA955X_EHCI0_BASE 0x1b000000

View file

@ -1,213 +0,0 @@
From a034da3e4d4960266a94d15c811d5f4529fdff44 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 24 Jun 2012 13:52:23 +0200
Subject: [PATCH 27/34] MIPS: ath79: add support for the Qualcomm Atheros AP136 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/Kconfig | 12 +++
arch/mips/ath79/Makefile | 1 +
arch/mips/ath79/mach-ap136.c | 155 ++++++++++++++++++++++++++++++++++++++++++
arch/mips/ath79/machtypes.h | 1 +
4 files changed, 169 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/ath79/mach-ap136.c
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -14,6 +14,18 @@ config ATH79_MACH_AP121
Say 'Y' here if you want your kernel to support the
Atheros AP121 reference board.
+config ATH79_MACH_AP136
+ bool "Atheros AP136 reference board"
+ select SOC_QCA955X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP136 reference board.
+
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
# Machines
#
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
--- /dev/null
+++ b/arch/mips/ath79/mach-ap136.c
@@ -0,0 +1,155 @@
+/*
+ * Qualcomm Atheros AP136 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define AP136_GPIO_LED_STATUS_RED 14
+#define AP136_GPIO_LED_STATUS_GREEN 19
+#define AP136_GPIO_LED_USB 4
+#define AP136_GPIO_LED_WLAN_2G 13
+#define AP136_GPIO_LED_WLAN_5G 12
+#define AP136_GPIO_LED_WPS_RED 15
+#define AP136_GPIO_LED_WPS_GREEN 20
+
+#define AP136_GPIO_BTN_WPS 16
+#define AP136_GPIO_BTN_RFKILL 21
+
+#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
+
+#define AP136_WMAC_CALDATA_OFFSET 0x1000
+#define AP136_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led ap136_leds_gpio[] __initdata = {
+ {
+ .name = "ap136:green:status",
+ .gpio = AP136_GPIO_LED_STATUS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap136:red:status",
+ .gpio = AP136_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap136:green:wps",
+ .gpio = AP136_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap136:red:wps",
+ .gpio = AP136_GPIO_LED_WPS_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "ap136:red:wlan-2g",
+ .gpio = AP136_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "ap136:red:usb",
+ .gpio = AP136_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP136_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP136_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static struct spi_board_info ap136_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
+ }
+};
+
+static struct ath79_spi_platform_data ap136_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ap136_ath9k_data;
+
+static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+{
+ if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+ dev->dev.platform_data = &ap136_ath9k_data;
+
+ return 0;
+}
+
+static void __init ap136_pci_init(u8 *eeprom)
+{
+ memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+ sizeof(ap136_ath9k_data.eeprom_data));
+
+ ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void ap136_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init ap136_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+ ap136_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap136_gpio_keys),
+ ap136_gpio_keys);
+ ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+ ARRAY_SIZE(ap136_spi_info));
+ ath79_register_usb();
+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+ ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
+ ap136_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -17,6 +17,7 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP136, /* Atheros AP136 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */

View file

@ -1,122 +0,0 @@
From cbb3ade4765bc715b5c2eae4a7b6eaf3ff7ad958 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 20:06:35 +0100
Subject: [PATCH 28/34] spi/ath79: add delay between SCK changes
The driver uses the "as fast as it can" approach
to drive the SCK signal. However this does not
work with certain low speed SPI chips (e.g. the
PCF2123 RTC chip). Add per-bit slowdowns in order
to be able to use the driver with such chips as
well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 43 insertions(+), 1 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -24,17 +24,24 @@
#include <linux/spi/spi_bitbang.h>
#include <linux/bitops.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79_spi_platform.h>
#define DRV_NAME "ath79-spi"
+#define ATH79_SPI_RRW_DELAY_FACTOR 12000
+#define MHZ (1000 * 1000)
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
u32 reg_ctrl;
void __iomem *base;
+ struct clk *clk;
+ unsigned rrw_delay;
};
static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
return spi_master_get_devdata(spi->master);
}
+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
+{
+ if (nsecs > sp->rrw_delay)
+ ndelay(nsecs - sp->rrw_delay);
+}
+
static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
/* setup MSB (to slave) on trailing edge */
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+ ath79_spi_delay(sp, nsecs);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(sp, nsecs);
word <<= 1;
}
@@ -198,6 +213,7 @@ static __devinit int ath79_spi_probe(str
struct ath79_spi *sp;
struct ath79_spi_platform_data *pdata;
struct resource *r;
+ unsigned long rate;
int ret;
master = spi_alloc_master(&pdev->dev, sizeof(*sp));
@@ -236,12 +252,36 @@ static __devinit int ath79_spi_probe(str
goto err_put_master;
}
+ sp->clk = clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(sp->clk)) {
+ ret = PTR_ERR(sp->clk);
+ goto err_unmap;
+ }
+
+ ret = clk_enable(sp->clk);
+ if (ret)
+ goto err_clk_put;
+
+ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+ sp->rrw_delay);
+
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
- goto err_unmap;
+ goto err_clk_disable;
return 0;
+err_clk_disable:
+ clk_disable(sp->clk);
+err_clk_put:
+ clk_put(sp->clk);
err_unmap:
iounmap(sp->base);
err_put_master:
@@ -256,6 +296,8 @@ static __devexit int ath79_spi_remove(st
struct ath79_spi *sp = platform_get_drvdata(pdev);
spi_bitbang_stop(&sp->bitbang);
+ clk_disable(sp->clk);
+ clk_put(sp->clk);
iounmap(sp->base);
platform_set_drvdata(pdev, NULL);
spi_master_put(sp->bitbang.master);

View file

@ -1,21 +0,0 @@
From bcb0fdebc08f828b54d0a2eb74a9d1378701a8e0 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 20:33:41 +0100
Subject: [PATCH 29/34] spi/ath79: add missing HIGH->LOW SCK transition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
ath79_spi_delay(sp, nsecs);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
ath79_spi_delay(sp, nsecs);
+ if (bits == 1)
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
word <<= 1;
}

View file

@ -1,30 +0,0 @@
From 06752f9b169493cd1323f8337c147ad2dd31025c Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:03:28 +0100
Subject: [PATCH 30/34] spi/ath79: remove superfluous chip select code
The spi_bitbang driver calls the chipselect function
of the driver from spi_bitbang_setup in order to
deselect the given SPI chip, so we don't have to
initialize the CS line here.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
gpio_free(cdata->gpio);
return status;
}
- } else {
- if (spi->mode & SPI_CS_HIGH)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
- else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
return 0;

View file

@ -1,56 +0,0 @@
From 6bd876a46b977643f27d2cc63f49e1bc84b78134 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:04:21 +0100
Subject: [PATCH 31/34] spi/ath79: use gpio_request_one
Use gpio_request_one() instead of multiple gpiolib calls.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
1 files changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
struct ath79_spi_controller_data *cdata;
+ int status;
cdata = spi->controller_data;
if (spi->chip_select && !cdata)
@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
/* TODO: setup speed? */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ status = 0;
if (spi->chip_select) {
- int status = 0;
+ unsigned long flags;
- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
- if (status)
- return status;
-
- status = gpio_direction_output(cdata->gpio,
- spi->mode & SPI_CS_HIGH);
- if (status) {
- gpio_free(cdata->gpio);
- return status;
- }
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+ flags |= GPIOF_INIT_HIGH;
+ else
+ flags |= GPIOF_INIT_LOW;
+
+ status = gpio_request_one(cdata->gpio, flags,
+ dev_name(&spi->dev));
}
- return 0;
+ return status;
}
static void ath79_spi_cleanup_cs(struct spi_device *spi)

View file

@ -1,108 +0,0 @@
From e63ceaa0c4f7be0498cd452981073d3ce8e7d1f5 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 9 Jan 2012 15:00:46 +0100
Subject: [PATCH 32/34] spi/ath79: avoid multiple initialization of the SPI controller
Currently we are initializing the SPI controller in
the chip select line function, and that function is
called once for each SPI device on the bus. If a
board has multiple SPI devices, the controller will
be initialized multiple times.
Introduce ath79_spi_{en,dis}able helper functions,
and call those from probe/response in order to avoid
the mutliple initialization of the controller.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
1 files changed, 24 insertions(+), 17 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
}
-static int ath79_spi_setup_cs(struct spi_device *spi)
+static void ath79_spi_enable(struct ath79_spi *sp)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- struct ath79_spi_controller_data *cdata;
- int status;
-
- cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
- return -EINVAL;
-
/* enable GPIO mode */
ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
/* TODO: setup speed? */
ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+}
+
+static void ath79_spi_disable(struct ath79_spi *sp)
+{
+ /* restore CTRL register */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+ /* disable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+}
+
+static int ath79_spi_setup_cs(struct spi_device *spi)
+{
+ struct ath79_spi_controller_data *cdata;
+ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+ return -EINVAL;
status = 0;
if (spi->chip_select) {
@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-
if (spi->chip_select) {
struct ath79_spi_controller_data *cdata = spi->controller_data;
gpio_free(cdata->gpio);
}
-
- /* restore CTRL register */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
- /* disable GPIO mode */
- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
}
static int ath79_spi_setup(struct spi_device *spi)
@@ -268,12 +271,15 @@ static __devinit int ath79_spi_probe(str
dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
sp->rrw_delay);
+ ath79_spi_enable(sp);
ret = spi_bitbang_start(&sp->bitbang);
if (ret)
- goto err_clk_disable;
+ goto err_disable;
return 0;
+err_disable:
+ ath79_spi_disable(sp);
err_clk_disable:
clk_disable(sp->clk);
err_clk_put:
@@ -292,6 +298,7 @@ static __devexit int ath79_spi_remove(st
struct ath79_spi *sp = platform_get_drvdata(pdev);
spi_bitbang_stop(&sp->bitbang);
+ ath79_spi_disable(sp);
clk_disable(sp->clk);
clk_put(sp->clk);
iounmap(sp->base);

View file

@ -1,45 +0,0 @@
From dab305def68a9ea28c1c0ca2fc20bba645944914 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 22:19:32 +0100
Subject: [PATCH 33/34] spi/ath79: add shutdown handler
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/spi/spi-ath79.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -293,7 +293,7 @@ err_put_master:
return ret;
}
-static __devexit int ath79_spi_remove(struct platform_device *pdev)
+static void __ath79_spi_remove(struct platform_device *pdev)
{
struct ath79_spi *sp = platform_get_drvdata(pdev);
@@ -304,13 +304,23 @@ static __devexit int ath79_spi_remove(st
iounmap(sp->base);
platform_set_drvdata(pdev, NULL);
spi_master_put(sp->bitbang.master);
+}
+static __devexit int ath79_spi_remove(struct platform_device *pdev)
+{
+ __ath79_spi_remove(pdev);
return 0;
}
+static void ath79_spi_shutdown(struct platform_device *pdev)
+{
+ __ath79_spi_remove(pdev);
+}
+
static struct platform_driver ath79_spi_driver = {
.probe = ath79_spi_probe,
.remove = __devexit_p(ath79_spi_remove),
+ .shutdown = ath79_spi_shutdown,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,

View file

@ -1,310 +0,0 @@
From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 11 Jan 2012 22:25:11 +0100
Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/mach-ap121.c | 6 ++
arch/mips/ath79/mach-ap136.c | 6 ++
arch/mips/ath79/mach-ap81.c | 6 ++
arch/mips/ath79/mach-db120.c | 6 ++
arch/mips/ath79/mach-pb44.c | 6 ++
arch/mips/ath79/mach-ubnt-xm.c | 6 ++
.../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
drivers/spi/spi-ath79.c | 67 +++++++++++++-------
8 files changed, 88 insertions(+), 23 deletions(-)
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
}
};
+static struct ath79_spi_controller_data ap121_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ap121_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l1606e",
+ .controller_data = &ap121_spi0_data,
}
};
--- a/arch/mips/ath79/mach-ap136.c
+++ b/arch/mips/ath79/mach-ap136.c
@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
},
};
+static struct ath79_spi_controller_data ap136_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ap136_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
+ .controller_data = &ap136_spi0_data,
}
};
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
}
};
+static struct ath79_spi_controller_data ap81_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ap81_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
+ .controller_data = &ap81_spi0_data,
}
};
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
},
};
+static struct ath79_spi_controller_data db120_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info db120_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "s25sl064a",
+ .controller_data = &db120_spi0_data,
}
};
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
}
};
+static struct ath79_spi_controller_data pb44_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info pb44_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
+ .controller_data = &pb44_spi0_data,
},
};
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
}
};
+static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
static struct spi_board_info ubnt_xm_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
+ .controller_data = &ubnt_xm_spi0_data,
}
};
--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
unsigned num_chipselect;
};
+enum ath79_spi_cs_type {
+ ATH79_SPI_CS_TYPE_INTERNAL,
+ ATH79_SPI_CS_TYPE_GPIO,
+};
+
struct ath79_spi_controller_data {
- unsigned gpio;
+ enum ath79_spi_cs_type cs_type;
+ unsigned cs_line;
};
#endif /* _ATH79_SPI_PLATFORM_H */
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -35,6 +35,8 @@
#define ATH79_SPI_RRW_DELAY_FACTOR 12000
#define MHZ (1000 * 1000)
+#define ATH79_SPI_CS_LINE_MAX 2
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
if (is_active) {
/* set initial clock polarity */
@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
-
- /* SPI is normally active-low */
- gpio_set_value(cdata->gpio, cs_high);
- } else {
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
if (cs_high)
- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
else
- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
+ /* SPI is normally active-low */
+ if (gpio_cansleep(cdata->cs_line))
+ gpio_set_value_cansleep(cdata->cs_line, cs_high);
+ else
+ gpio_set_value(cdata->cs_line, cs_high);
+ break;
+ }
}
static void ath79_spi_enable(struct ath79_spi *sp)
@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath
static int ath79_spi_setup_cs(struct spi_device *spi)
{
struct ath79_spi_controller_data *cdata;
+ unsigned long flags;
int status;
cdata = spi->controller_data;
- if (spi->chip_select && !cdata)
+ if (!cdata)
return -EINVAL;
status = 0;
- if (spi->chip_select) {
- unsigned long flags;
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
+ status = -EINVAL;
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
flags = GPIOF_DIR_OUT;
if (spi->mode & SPI_CS_HIGH)
flags |= GPIOF_INIT_HIGH;
else
flags |= GPIOF_INIT_LOW;
- status = gpio_request_one(cdata->gpio, flags,
+ status = gpio_request_one(cdata->cs_line, flags,
dev_name(&spi->dev));
+ break;
}
return status;
@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- if (spi->chip_select) {
- struct ath79_spi_controller_data *cdata = spi->controller_data;
- gpio_free(cdata->gpio);
+ struct ath79_spi_controller_data *cdata;
+
+ cdata = spi->controller_data;
+ if (!cdata)
+ return;
+
+ switch (cdata->cs_type) {
+ case ATH79_SPI_CS_TYPE_INTERNAL:
+ /* nothing to do */
+ break;
+ case ATH79_SPI_CS_TYPE_GPIO:
+ gpio_free(cdata->cs_line);
+ break;
}
}
@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de
{
int status = 0;
+ if (spi->controller_data == NULL)
+ return -EINVAL;
+
if (spi->bits_per_word > 32)
return -EINVAL;
@@ -215,6 +241,10 @@ static __devinit int ath79_spi_probe(str
unsigned long rate;
int ret;
+ pdata = pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
master = spi_alloc_master(&pdev->dev, sizeof(*sp));
if (master == NULL) {
dev_err(&pdev->dev, "failed to allocate spi master\n");
@@ -224,14 +254,10 @@ static __devinit int ath79_spi_probe(str
sp = spi_master_get_devdata(master);
platform_set_drvdata(pdev, sp);
- pdata = pdev->dev.platform_data;
-
master->setup = ath79_spi_setup;
master->cleanup = ath79_spi_cleanup;
- if (pdata) {
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
- }
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->num_chipselect;
sp->bitbang.master = spi_master_get(master);
sp->bitbang.chipselect = ath79_spi_chipselect;

View file

@ -1,66 +0,0 @@
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -35,44 +35,17 @@ static void ath79_misc_irq_handler(unsig
pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
- if (pending & MISC_INT_UART)
- generic_handle_irq(ATH79_MISC_IRQ_UART);
-
- else if (pending & MISC_INT_DMA)
- generic_handle_irq(ATH79_MISC_IRQ_DMA);
-
- else if (pending & MISC_INT_PERFC)
- generic_handle_irq(ATH79_MISC_IRQ_PERFC);
-
- else if (pending & MISC_INT_TIMER)
- generic_handle_irq(ATH79_MISC_IRQ_TIMER);
-
- else if (pending & MISC_INT_TIMER2)
- generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
-
- else if (pending & MISC_INT_TIMER3)
- generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
-
- else if (pending & MISC_INT_TIMER4)
- generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
-
- else if (pending & MISC_INT_OHCI)
- generic_handle_irq(ATH79_MISC_IRQ_OHCI);
-
- else if (pending & MISC_INT_ERROR)
- generic_handle_irq(ATH79_MISC_IRQ_ERROR);
-
- else if (pending & MISC_INT_GPIO)
- generic_handle_irq(ATH79_MISC_IRQ_GPIO);
-
- else if (pending & MISC_INT_WDOG)
- generic_handle_irq(ATH79_MISC_IRQ_WDOG);
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
- else if (pending & MISC_INT_ETHSW)
- generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
+ while (pending) {
+ int bit = __ffs(pending);
- else
- spurious_interrupt();
+ generic_handle_irq(ATH79_MISC_IRQ(bit));
+ pending &= ~BIT(bit);
+ }
}
static void ar71xx_misc_irq_unmask(struct irq_data *d)
--- a/arch/mips/include/asm/mach-ath79/irq.h
+++ b/arch/mips/include/asm/mach-ath79/irq.h
@@ -14,6 +14,7 @@
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
+#define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x))
#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
#define ATH79_PCI_IRQ_COUNT 6

View file

@ -1,106 +0,0 @@
From 177dc53a07e2c660d1c1a6cec4576c802325e330 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 14 Nov 2012 09:02:01 +0100
Subject: [PATCH] MIPS: ath79: fix GPIO function selection for AR934x SoCs
GPIO function selection is not working on the AR934x
SoCs because the offset of the function selection
register is different on those.
Add a helper routine which returns the correct
register address based on the SoC type, and use
that in the 'ath79_gpio_function_*' routines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ath79/gpio.c | 38 ++++++++++++++++--------
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
2 files changed, 28 insertions(+), 12 deletions(-)
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -137,47 +137,61 @@ static struct gpio_chip ath79_gpio_chip
.base = 0,
};
+static void __iomem *ath79_gpio_get_function_reg(void)
+{
+ u32 reg = 0;
+
+ if (soc_is_ar71xx() ||
+ soc_is_ar724x() ||
+ soc_is_ar913x() ||
+ soc_is_ar933x())
+ reg = AR71XX_GPIO_REG_FUNC;
+ else if (soc_is_ar934x())
+ reg = AR934X_GPIO_REG_FUNC;
+ else
+ BUG();
+
+ return ath79_gpio_base + reg;
+}
+
void ath79_gpio_function_enable(u32 mask)
{
- void __iomem *base = ath79_gpio_base;
+ void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags);
- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask,
- base + AR71XX_GPIO_REG_FUNC);
+ __raw_writel(__raw_readl(reg) | mask, reg);
/* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
+ __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
}
void ath79_gpio_function_disable(u32 mask)
{
- void __iomem *base = ath79_gpio_base;
+ void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags);
- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask,
- base + AR71XX_GPIO_REG_FUNC);
+ __raw_writel(__raw_readl(reg) & ~mask, reg);
/* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
+ __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
}
void ath79_gpio_function_setup(u32 set, u32 clear)
{
- void __iomem *base = ath79_gpio_base;
+ void __iomem *reg = ath79_gpio_get_function_reg();
unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags);
- __raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set,
- base + AR71XX_GPIO_REG_FUNC);
+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
/* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_FUNC);
+ __raw_readl(reg);
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
}
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -520,6 +520,8 @@
#define AR71XX_GPIO_REG_INT_ENABLE 0x24
#define AR71XX_GPIO_REG_FUNC 0x28
+#define AR934X_GPIO_REG_FUNC 0x6c
+
#define AR71XX_GPIO_COUNT 16
#define AR7240_GPIO_COUNT 18
#define AR7241_GPIO_COUNT 20

View file

@ -1,31 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi
static int ar933x_wmac_reset(void)
{
+ int retries = 20;
+
ath79_device_reset_set(AR933X_RESET_WMAC);
ath79_device_reset_clear(AR933X_RESET_WMAC);
- return 0;
+ while (1) {
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
+ return 0;
+
+ if (retries-- == 0)
+ break;
+
+ udelay(10000);
+ retries++;
+ }
+
+ pr_err("ar933x: WMAC reset timed out");
+ return -ETIMEDOUT;
}
static int ar933x_r1_get_wmac_revision(void)

View file

@ -1,114 +0,0 @@
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -194,6 +194,9 @@ config LZMA_COMPRESS
config LZMA_DECOMPRESS
tristate
+config RLE_DECOMPRESS
+ tristate
+
#
# These all provide a common interface (hence the apparent duplication with
# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
obj-$(CONFIG_RAID6_PQ) += raid6/
obj-$(CONFIG_LZMA_COMPRESS) += lzma/
obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
--- /dev/null
+++ b/include/linux/rle.h
@@ -0,0 +1,8 @@
+#ifndef _RLE_H_
+#define _RLE_H_
+
+int rle_decode(const unsigned char *src, size_t srclen,
+ unsigned char *dst, size_t dstlen,
+ size_t *src_done, size_t *dst_done);
+
+#endif /* _RLE_H_ */
--- /dev/null
+++ b/lib/rle.c
@@ -0,0 +1,78 @@
+/*
+ * RLE decoding routine
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rle.h>
+
+int rle_decode(const unsigned char *src, size_t srclen,
+ unsigned char *dst, size_t dstlen,
+ size_t *src_done, size_t *dst_done)
+{
+ size_t srcpos, dstpos;
+ int ret;
+
+ srcpos = 0;
+ dstpos = 0;
+ ret = -EINVAL;
+
+ /* sanity checks */
+ if (!src || !srclen || !dst || !dstlen)
+ goto out;
+
+ while (1) {
+ char count;
+
+ if (srcpos >= srclen)
+ break;
+
+ count = (char) src[srcpos++];
+ if (count == 0) {
+ ret = 0;
+ break;
+ }
+
+ if (count > 0) {
+ unsigned char c;
+
+ if (srcpos >= srclen)
+ break;
+
+ c = src[srcpos++];
+
+ while (count--) {
+ if (dstpos >= dstlen)
+ break;
+
+ dst[dstpos++] = c;
+ }
+ } else {
+ count *= -1;
+
+ while (count--) {
+ if (srcpos >= srclen)
+ break;
+ if (dstpos >= dstlen)
+ break;
+ dst[dstpos++] = src[srcpos++];
+ }
+ }
+ }
+
+out:
+ if (src_done)
+ *src_done = srcpos;
+ if (dst_done)
+ *dst_done = dstpos;
+
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(rle_decode);

View file

@ -1,94 +0,0 @@
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -31,6 +31,66 @@ struct physmap_flash_info {
int vpp_refcnt;
};
+static struct platform_device *physmap_map2pdev(struct map_info *map)
+{
+ return (struct platform_device *) map->map_priv_1;
+}
+
+static void physmap_lock(struct map_info *map)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = physmap_map2pdev(map);
+ physmap_data = pdev->dev.platform_data;
+ physmap_data->lock(pdev);
+}
+
+static void physmap_unlock(struct map_info *map)
+{
+ struct platform_device *pdev;
+ struct physmap_flash_data *physmap_data;
+
+ pdev = physmap_map2pdev(map);
+ physmap_data = pdev->dev.platform_data;
+ physmap_data->unlock(pdev);
+}
+
+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
+{
+ map_word ret;
+
+ physmap_lock(map);
+ ret = inline_map_read(map, ofs);
+ physmap_unlock(map);
+
+ return ret;
+}
+
+static void physmap_flash_write_lock(struct map_info *map, map_word d,
+ unsigned long ofs)
+{
+ physmap_lock(map);
+ inline_map_write(map, d, ofs);
+ physmap_unlock(map);
+}
+
+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ physmap_lock(map);
+ inline_map_copy_from(map, to, from, len);
+ physmap_unlock(map);
+}
+
+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
+ const void *from, ssize_t len)
+{
+ physmap_lock(map);
+ inline_map_copy_to(map, to, from, len);
+ physmap_unlock(map);
+}
+
static int physmap_flash_remove(struct platform_device *dev)
{
struct physmap_flash_info *info;
@@ -157,6 +217,13 @@ static int physmap_flash_probe(struct pl
simple_map_init(&info->map[i]);
+ if (physmap_data->lock && physmap_data->unlock) {
+ info->map[i].read = physmap_flash_read_lock;
+ info->map[i].write = physmap_flash_write_lock;
+ info->map[i].copy_from = physmap_flash_copy_from_lock;
+ info->map[i].copy_to = physmap_flash_copy_to_lock;
+ }
+
probe_type = rom_probe_types;
if (physmap_data->probe_type == NULL) {
for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -26,6 +26,8 @@ struct physmap_flash_data {
unsigned int width;
int (*init)(struct platform_device *);
void (*exit)(struct platform_device *);
+ void (*lock)(struct platform_device *);
+ void (*unlock)(struct platform_device *);
void (*set_vpp)(struct platform_device *, int);
unsigned int nr_parts;
unsigned int pfow_base;

View file

@ -1,29 +0,0 @@
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -148,6 +148,7 @@
#define SST39LF160 0x2782
#define SST39VF1601 0x234b
#define SST39VF3201 0x235b
+#define SST39VF6401B 0x236d
#define SST39WF1601 0x274b
#define SST39WF1602 0x274a
#define SST39LF512 0x00D4
@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
ERASEINFO(0x10000,64),
}
}, {
+ .mfr_id = CFI_MFR_SST,
+ .dev_id = SST39VF6401B,
+ .name = "SST 39VF6401B",
+ .devtypes = CFI_DEVICETYPE_X16,
+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
+ .dev_size = SIZE_8MiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x10000,128)
+ }
+ }, {
.mfr_id = CFI_MFR_ST,
.dev_id = M29F800AB,
.name = "ST M29F800AB",

View file

@ -1,69 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1221,8 +1221,8 @@ static int __xipram do_write_oneword(str
break;
}
- if (chip_ready(map, adr))
- break;
+ if (chip_good(map, adr, datum))
+ goto enable_xip;
/* Latency issues. Drop the lock, wait a while and retry */
UDELAY(map, chip, adr, 1);
@@ -1238,6 +1238,8 @@ static int __xipram do_write_oneword(str
ret = -EIO;
}
+
+ enable_xip:
xip_enable(map, chip, adr);
op_done:
chip->state = FL_READY;
@@ -1796,7 +1798,6 @@ static int cfi_amdstd_panic_write(struct
return 0;
}
-
/*
* Handle devices with one erase region, that only implement
* the chip erase command.
@@ -1860,8 +1861,8 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr))
- break;
+ if (chip_good(map, adr, map_word_ff(map)))
+ goto op_done;
if (time_after(jiffies, timeo)) {
printk(KERN_WARNING "MTD %s(): software timeout\n",
@@ -1881,6 +1882,7 @@ static int __xipram do_erase_chip(struct
ret = -EIO;
}
+ op_done:
chip->state = FL_READY;
xip_enable(map, chip, adr);
DISABLE_VPP(map);
@@ -1949,9 +1951,9 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
- if (chip_ready(map, adr)) {
+ if (chip_good(map, adr, map_word_ff(map))) {
xip_enable(map, chip, adr);
- break;
+ goto op_done;
}
if (time_after(jiffies, timeo)) {
@@ -1973,6 +1975,7 @@ static int __xipram do_erase_oneblock(st
ret = -EIO;
}
+ op_done:
chip->state = FL_READY;
DISABLE_VPP(map);
put_chip(map, chip, adr);

View file

@ -1,25 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -156,6 +156,12 @@ config MTD_BCM63XX_PARTS
This provides partions parsing for BCM63xx devices with CFE
bootloaders.
+config MTD_WRT160NL_PARTS
+ tristate "Linksys WRT160NL partitioning support"
+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
+ ---help---
+ Linksys WRT160NL partitioning support
+
config MTD_MYLOADER_PARTS
tristate "MyLoader partition parsing"
depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

View file

@ -1,34 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -158,7 +158,7 @@ config MTD_BCM63XX_PARTS
config MTD_WRT160NL_PARTS
tristate "Linksys WRT160NL partitioning support"
- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
+ depends on ATH79_MACH_WRT160NL
---help---
Linksys WRT160NL partitioning support
@@ -178,6 +178,12 @@ config MTD_MYLOADER_PARTS
You will still need the parsing functions to be called by the driver
for your particular device. It won't happen automatically.
+config MTD_TPLINK_PARTS
+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
+ depends on ATH79
+ ---help---
+ TBD.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
# 'Users' - code which presents functionality to userspace.

View file

@ -1,109 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -100,6 +100,7 @@ struct m25p {
u16 addr_width;
u8 erase_opcode;
u8 *command;
+ size_t max_read_len;
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -349,6 +350,7 @@ static int m25p80_read(struct mtd_info *
struct m25p *flash = mtd_to_m25p(mtd);
struct spi_transfer t[2];
struct spi_message m;
+ loff_t ofs;
pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
__func__, (u32)from, len);
@@ -364,19 +366,10 @@ static int m25p80_read(struct mtd_info *
t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
spi_message_add_tail(&t[0], &m);
- t[1].rx_buf = buf;
- t[1].len = len;
spi_message_add_tail(&t[1], &m);
mutex_lock(&flash->lock);
- /* Wait till previous write/erase is done. */
- if (wait_till_ready(flash)) {
- /* REVISIT status return?? */
- mutex_unlock(&flash->lock);
- return 1;
- }
-
/* FIXME switch to OPCODE_FAST_READ. It's required for higher
* clocks; and at this writing, every chip this driver handles
* supports that opcode.
@@ -384,11 +377,44 @@ static int m25p80_read(struct mtd_info *
/* Set up the write data buffer. */
flash->command[0] = OPCODE_READ;
- m25p_addr2cmd(flash, from, flash->command);
- spi_sync(flash->spi, &m);
+ ofs = 0;
+ while (len) {
+ size_t readlen;
+ size_t done;
+ int ret;
+
+ ret = wait_till_ready(flash);
+ if (ret) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ if (flash->max_read_len > 0 &&
+ flash->max_read_len < len)
+ readlen = flash->max_read_len;
+ else
+ readlen = len;
+
+ t[1].rx_buf = buf + ofs;
+ t[1].len = readlen;
+
+ m25p_addr2cmd(flash, from + ofs, flash->command);
+
+ spi_sync(flash->spi, &m);
- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
+ done = m.actual_length - m25p_cmdsz(flash) -
+ FAST_READ_DUMMY_BYTE;
+ if (done != readlen) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+
+ ofs += done;
+ len -= done;
+ }
+
+ *retlen = ofs;
mutex_unlock(&flash->lock);
@@ -899,6 +925,12 @@ static int __devinit m25p_probe(struct s
flash->mtd._erase = m25p80_erase;
flash->mtd._read = m25p80_read;
+ if (data && data->max_read_len) {
+ flash->max_read_len = data->max_read_len;
+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
+ flash->max_read_len);
+ }
+
/* sst flash chips use AAI word program */
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
flash->mtd._write = sst_write;
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -25,6 +25,7 @@ struct flash_platform_data {
char *type;
+ size_t max_read_len;
/* we'll likely add more ... use JEDEC IDs, etc */
};

View file

@ -1,23 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -992,7 +992,9 @@ static int __devinit m25p_probe(struct s
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+ return mtd_device_parse_register(&flash->mtd,
+ data ? data->part_probes : NULL,
+ &ppdata,
data ? data->parts : NULL,
data ? data->nr_parts : 0);
}
--- a/include/linux/spi/flash.h
+++ b/include/linux/spi/flash.h
@@ -24,6 +24,7 @@ struct flash_platform_data {
unsigned int nr_parts;
char *type;
+ const char **part_probes;
size_t max_read_len;
/* we'll likely add more ... use JEDEC IDs, etc */

View file

@ -1,44 +0,0 @@
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
static char nullstring[] = "unallocated";
#endif
+ buf = vmalloc(master->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ restart:
if ( directory < 0 ) {
offset = master->size + directory * master->erasesize;
while (mtd_block_isbad(master, offset)) {
if (!offset) {
nogood:
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
+ vfree(buf);
return -EIO;
}
offset -= master->erasesize;
@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
goto nogood;
}
}
- buf = vmalloc(master->erasesize);
-
- if (!buf)
- return -ENOMEM;
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
master->name, offset);
@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
}
if (i == numslots) {
/* Didn't find it */
+ if (offset + master->erasesize < master->size) {
+ /* not at the end of the flash yet, maybe next block :) */
+ directory++;
+ goto restart;
+ }
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
master->name);
ret = 0;

View file

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -607,4 +607,8 @@ config MTD_NAND_FSMC
Enables support for NAND Flash chips on the ST Microelectronics
Flexible Static Memory Controller (FSMC)
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATH79_MACH_RB4XX
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

View file

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -611,4 +611,8 @@ config MTD_NAND_RB4XX
tristate "NAND flash driver for RouterBoard 4xx series"
depends on MTD_NAND && ATH79_MACH_RB4XX
+config MTD_NAND_RB750
+ tristate "NAND flash driver for the RouterBoard 750"
+ depends on MTD_NAND && ATH79_MACH_RB750
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o

View file

@ -1,61 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -39,7 +39,7 @@
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
#define MAX_WORD_RETRIES 3
@@ -50,7 +50,9 @@
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#if !FORCE_WORD_WRITE
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+#endif
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
+#if !FORCE_WORD_WRITE
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
mtd->_write = cfi_amdstd_write_buffers;
}
}
+#endif /* !FORCE_WORD_WRITE */
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
@@ -1378,6 +1382,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
+#if !FORCE_WORD_WRITE
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
@@ -1490,7 +1495,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
-
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
@@ -1565,6 +1569,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
+#endif /* !FORCE_WORD_WRITE */
/*
* Wait for the flash chip to become ready to write data

View file

@ -1,10 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -952,6 +952,7 @@ static int __devinit m25p_probe(struct s
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
+ memset(&ppdata, '\0', sizeof(ppdata));
ppdata.of_node = spi->dev.of_node;
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;

View file

@ -1,21 +0,0 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -615,4 +615,8 @@ config MTD_NAND_RB750
tristate "NAND flash driver for the RouterBoard 750"
depends on MTD_NAND && ATH79_MACH_RB750
+config MTD_NAND_AR934X
+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
+ depends on (SOC_AR934X || SOC_QCA955X)
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SM_COMMON) += sm_comm
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o

View file

@ -1,28 +0,0 @@
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_ATHEROS
bool "Atheros devices"
default y
- depends on PCI
+ depends on (PCI || ATH79)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -67,4 +67,6 @@ config ATL1C
To compile this driver as a module, choose M here. The module
will be called atl1c.
+source drivers/net/ethernet/atheros/ag71xx/Kconfig
+
endif # NET_VENDOR_ATHEROS
--- a/drivers/net/ethernet/atheros/Makefile
+++ b/drivers/net/ethernet/atheros/Makefile
@@ -2,6 +2,7 @@
# Makefile for the Atheros network device drivers.
#
+obj-$(CONFIG_AG71XX) += ag71xx/
obj-$(CONFIG_ATL1) += atlx/
obj-$(CONFIG_ATL2) += atlx/
obj-$(CONFIG_ATL1E) += atl1e/

View file

@ -1,11 +0,0 @@
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
trailer = skb_tail_pointer(skb) - 4;
if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
goto out_drop;
source_port = trailer[1] & 7;

View file

@ -1,24 +0,0 @@
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -12,6 +12,13 @@ config NET_DSA_MV88E6060
This enables support for the Marvell 88E6060 ethernet switch
chip.
+config NET_DSA_MV88E6063
+ bool "Marvell 88E6063 ethernet switch chip support"
+ select NET_DSA_TAG_TRAILER
+ ---help---
+ This enables support for the Marvell 88E6063 ethernet switch
+ chip
+
config NET_DSA_MV88E6XXX_NEED_PPU
bool
default n
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
mv88e6xxx_drv-y += mv88e6xxx.o
ifdef CONFIG_NET_DSA_MV88E6123_61_65

View file

@ -1,12 +0,0 @@
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -53,8 +53,8 @@ obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
-obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_MTD) += mtd/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/

View file

@ -1,19 +0,0 @@
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -503,6 +503,8 @@ struct spi_transfer {
dma_addr_t rx_dma;
unsigned cs_change:1;
+ unsigned verify:1;
+ unsigned fast_write:1;
u8 bits_per_word;
u16 delay_usecs;
u32 speed_hz;
@@ -544,6 +546,7 @@ struct spi_message {
struct spi_device *spi;
unsigned is_dma_mapped:1;
+ unsigned fast_read:1;
/* REVISIT: we might want a flag affecting the behavior of the
* last transfer ... allowing things like "read 16 bit length L"

View file

@ -1,25 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -309,6 +309,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI blocks.
+config SPI_RB4XX
+ tristate "Mikrotik RB4XX SPI master"
+ depends on SPI_MASTER && ATH79_MACH_RB4XX
+ help
+ SPI controller driver for the Mikrotik RB4xx series boards.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX && EXPERIMENTAL
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o

View file

@ -1,26 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -479,6 +479,13 @@ config SPI_TLE62X0
sysfs interface, with each line presented as a kind of GPIO
exposing both switch control and diagnostic feedback.
+config SPI_RB4XX_CPLD
+ tristate "MikroTik RB4XX CPLD driver"
+ depends on ATH79_MACH_RB4XX
+ help
+ SPI driver for the Xilinx CPLD chip present on the
+ MikroTik RB4xx boards.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o

View file

@ -1,27 +0,0 @@
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
+obj-$(CONFIG_SPI_AP83) += spi-ap83.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -59,6 +59,14 @@ config SPI_ALTERA
help
This is the driver for the Altera SPI Controller.
+config SPI_AP83
+ tristate "Atheros AP83 specific SPI Controller"
+ depends on SPI_MASTER && ATH79_MACH_AP83
+ select SPI_BITBANG
+ help
+ This is a specific SPI controller driver for the Atheros AP83
+ reference board.
+
config SPI_ATH79
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
depends on ATH79 && GENERIC_GPIO

View file

@ -1,24 +0,0 @@
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -494,6 +494,11 @@ config SPI_RB4XX_CPLD
SPI driver for the Xilinx CPLD chip present on the
MikroTik RB4xx boards.
+config SPI_VSC7385
+ tristate "Vitesse VSC7385 ethernet switch driver"
+ help
+ SPI driver for the Vitesse VSC7385 ethernet switch.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o

View file

@ -1,26 +0,0 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -453,6 +453,13 @@ config LEDS_TRIGGERS
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
+config LEDS_WNDR3700_USB
+ tristate "NETGEAR WNDR3700 USB LED driver"
+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
+ help
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o

View file

@ -1,23 +0,0 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -460,6 +460,10 @@ config LEDS_WNDR3700_USB
This option enables support for the USB LED found on the
NETGEAR WNDR3700 board.
+config LEDS_RB750
+ tristate "LED driver for the Mikrotik RouterBOARD 750"
+ depends on LEDS_CLASS && ATH79_MACH_RB750
+
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o

View file

@ -1,25 +0,0 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -618,4 +618,12 @@ config GPIO_MSIC
Enable support for GPIO on intel MSIC controllers found in
intel MID devices
+comment "Other GPIO expanders"
+
+config GPIO_NXP_74HC153
+ tristate "NXP 74HC153 Dual 4-input multiplexer"
+ help
+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+ provides a GPIO interface supporting input mode only.
+
endif
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o

View file

@ -1,28 +0,0 @@
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi
}
EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct spi_bitbang_cs *cs = spi->controller_state;
unsigned nsecs = cs->nsecs;
return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
}
+EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
/*----------------------------------------------------------------------*/
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s
extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
extern int spi_bitbang_setup_transfer(struct spi_device *spi,
struct spi_transfer *t);
+extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
/* start or stop queue processing */
extern int spi_bitbang_start(struct spi_bitbang *spi);

View file

@ -1,23 +0,0 @@
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -406,6 +406,12 @@ extern struct spi_master *spi_busnum_to_
/*---------------------------------------------------------------------------*/
+enum spi_transfer_type {
+ SPI_TRANSFER_GENERIC = 0,
+ SPI_TRANSFER_FLASH_READ_CMD,
+ SPI_TRANSFER_FLASH_READ_DATA,
+};
+
/*
* I/O INTERFACE between SPI controller and protocol drivers
*
@@ -508,6 +514,7 @@ struct spi_transfer {
u8 bits_per_word;
u16 delay_usecs;
u32 speed_hz;
+ enum spi_transfer_type type;
struct list_head transfer_list;
};

View file

@ -1,15 +0,0 @@
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -362,10 +362,12 @@ static int m25p80_read(struct mtd_info *
* OPCODE_FAST_READ (if available) is faster.
* Should add 1 byte DUMMY_BYTE.
*/
+ t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
t[0].tx_buf = flash->command;
t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
spi_message_add_tail(&t[0], &m);
+ t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
spi_message_add_tail(&t[1], &m);
mutex_lock(&flash->lock);

View file

@ -1,185 +0,0 @@
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -37,6 +37,11 @@
#define ATH79_SPI_CS_LINE_MAX 2
+enum ath79_spi_state {
+ ATH79_SPI_STATE_WAIT_CMD = 0,
+ ATH79_SPI_STATE_WAIT_READ,
+};
+
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
@@ -44,6 +49,11 @@ struct ath79_spi {
void __iomem *base;
struct clk *clk;
unsigned rrw_delay;
+
+ enum ath79_spi_state state;
+ u32 clk_div;
+ unsigned long read_addr;
+ unsigned long ahb_rate;
};
static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7
/* save CTRL register */
sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
-
- /* TODO: setup speed? */
- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
}
static void ath79_spi_disable(struct ath79_spi *sp)
@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s
return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
}
+static int ath79_spi_do_read_flash_data(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+
+ /* disable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+
+ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
+
+ /* enable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+ /* restore IOC register */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+
+ return t->len;
+}
+
+static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ int len;
+ const u8 *p;
+
+ sp->read_addr = 0;
+
+ len = t->len - 1;
+ p = t->tx_buf;
+
+ while (len--) {
+ p++;
+ sp->read_addr <<= 8;
+ sp->read_addr |= *p;
+ }
+
+ return t->len;
+}
+
+static bool ath79_spi_is_read_cmd(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ return t->type == SPI_TRANSFER_FLASH_READ_CMD;
+}
+
+static bool ath79_spi_is_data_read(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ return t->type == SPI_TRANSFER_FLASH_READ_DATA;
+}
+
+static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ int ret;
+
+ switch (sp->state) {
+ case ATH79_SPI_STATE_WAIT_CMD:
+ if (ath79_spi_is_read_cmd(spi, t)) {
+ ret = ath79_spi_do_read_flash_cmd(spi, t);
+ sp->state = ATH79_SPI_STATE_WAIT_READ;
+ } else {
+ ret = spi_bitbang_bufs(spi, t);
+ }
+ break;
+
+ case ATH79_SPI_STATE_WAIT_READ:
+ if (ath79_spi_is_data_read(spi, t)) {
+ ret = ath79_spi_do_read_flash_data(spi, t);
+ } else {
+ dev_warn(&spi->dev, "flash data read expected\n");
+ ret = -EIO;
+ }
+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
+ break;
+
+ default:
+ BUG();
+ }
+
+ return ret;
+}
+
+static int ath79_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ struct ath79_spi_controller_data *cdata;
+ int ret;
+
+ ret = spi_bitbang_setup_transfer(spi, t);
+ if (ret)
+ return ret;
+
+ cdata = spi->controller_data;
+ if (cdata->is_flash)
+ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
+ else
+ sp->bitbang.txrx_bufs = spi_bitbang_bufs;
+
+ return ret;
+}
+
static __devinit int ath79_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
@@ -254,6 +365,8 @@ static __devinit int ath79_spi_probe(str
sp = spi_master_get_devdata(master);
platform_set_drvdata(pdev, sp);
+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
+
master->setup = ath79_spi_setup;
master->cleanup = ath79_spi_cleanup;
master->bus_num = pdata->bus_num;
@@ -262,7 +375,7 @@ static __devinit int ath79_spi_probe(str
sp->bitbang.master = spi_master_get(master);
sp->bitbang.chipselect = ath79_spi_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+ sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
sp->bitbang.flags = SPI_CS_HIGH;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -287,7 +400,8 @@ static __devinit int ath79_spi_probe(str
if (ret)
goto err_clk_put;
- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
+ sp->ahb_rate = clk_get_rate(sp->clk);
+ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
if (!rate) {
ret = -EINVAL;
goto err_clk_disable;
--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
struct ath79_spi_controller_data {
enum ath79_spi_cs_type cs_type;
unsigned cs_line;
+ bool is_flash;
};
#endif /* _ATH79_SPI_PLATFORM_H */

View file

@ -1,111 +0,0 @@
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
+#define __ASM_MACH_ATH79_MANGLE_PORT_H
+
+#ifdef CONFIG_PCI
+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
+#else
+#define ath79_pci_swizzle_b(port) (port)
+#define ath79_pci_swizzle_w(port) (port)
+#endif
+
+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+# define ioswabb(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define __mem_ioswabw(a, x) cpu_to_le16(x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabl(a, x) cpu_to_le32(x)
+# define ioswabq(a, x) (x)
+# define __mem_ioswabq(a, x) cpu_to_le64(x)
+
+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
--- a/arch/mips/ath79/pci.c
+++ b/arch/mips/ath79/pci.c
@@ -13,6 +13,7 @@
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/resource.h>
#include <linux/platform_device.h>
@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
static unsigned ath79_pci_nr_irqs __initdata;
+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
+
static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
{
.slot = 17,
@@ -202,12 +206,50 @@ ath79_register_pci_ar724x(int id,
return pdev;
}
+static inline bool ar71xx_is_pci_addr(unsigned long port)
+{
+ unsigned long phys = CPHYSADDR(port);
+
+ return (phys >= AR71XX_PCI_MEM_BASE &&
+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
+}
+
+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
+{
+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
+}
+
+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
+{
+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
+}
+
+unsigned long ath79_pci_swizzle_b(unsigned long port)
+{
+ if (__ath79_pci_swizzle_b)
+ return __ath79_pci_swizzle_b(port);
+
+ return port;
+}
+EXPORT_SYMBOL(ath79_pci_swizzle_b);
+
+unsigned long ath79_pci_swizzle_w(unsigned long port)
+{
+ if (__ath79_pci_swizzle_w)
+ return __ath79_pci_swizzle_w(port);
+
+ return port;
+}
+EXPORT_SYMBOL(ath79_pci_swizzle_w);
+
int __init ath79_register_pci(void)
{
struct platform_device *pdev = NULL;
if (soc_is_ar71xx()) {
pdev = ath79_register_pci_ar71xx();
+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
} else if (soc_is_ar724x()) {
pdev = ath79_register_pci_ar724x(-1,
AR724X_PCI_CFG_BASE,

View file

@ -1,22 +0,0 @@
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -175,6 +175,7 @@ endif
#
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -998,6 +998,9 @@ config MIPS_NILE4
config MIPS_DISABLE_OBSOLETE_IDE
bool
+config MYLOADER
+ bool
+
config SYNC_R4K
bool

View file

@ -1,81 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
+#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
@@ -22,6 +23,7 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-wmac.h"
+static u8 ath79_wmac_mac[ETH_ALEN];
static struct ath9k_platform_data ath79_wmac_data;
static struct resource ath79_wmac_resources[] = {
@@ -151,7 +153,7 @@ static void qca955x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
}
-void __init ath79_register_wmac(u8 *cal_data)
+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
@@ -168,5 +170,10 @@ void __init ath79_register_wmac(u8 *cal_
memcpy(ath79_wmac_data.eeprom_data, cal_data,
sizeof(ath79_wmac_data.eeprom_data));
+ if (mac_addr) {
+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
+ ath79_wmac_data.macaddr = ath79_wmac_mac;
+ }
+
platform_device_register(&ath79_wmac_device);
}
--- a/arch/mips/ath79/dev-wmac.h
+++ b/arch/mips/ath79/dev-wmac.h
@@ -12,6 +12,6 @@
#ifndef _ATH79_DEV_WMAC_H
#define _ATH79_DEV_WMAC_H
-void ath79_register_wmac(u8 *cal_data);
+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
#endif /* _ATH79_DEV_WMAC_H */
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
ap81_gpio_keys);
ath79_register_spi(&ap81_spi_data, ap81_spi_info,
ARRAY_SIZE(ap81_spi_info));
- ath79_register_wmac(cal_data);
+ ath79_register_wmac(cal_data, NULL);
ath79_register_usb();
}
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -134,7 +134,7 @@ static void __init db120_setup(void)
ath79_register_spi(&db120_spi_data, db120_spi_info,
ARRAY_SIZE(db120_spi_info));
ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
}
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
ath79_register_spi(&ap121_spi_data, ap121_spi_info,
ARRAY_SIZE(ap121_spi_info));
ath79_register_usb();
- ath79_register_wmac(cal_data);
+ ath79_register_wmac(cal_data, NULL);
}
MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",

View file

@ -1,23 +0,0 @@
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -25,7 +25,9 @@
#include <asm/mach-ath79/ath79.h>
#include "common.h"
-static void __iomem *ath79_gpio_base;
+void __iomem *ath79_gpio_base;
+EXPORT_SYMBOL_GPL(ath79_gpio_base);
+
static unsigned long ath79_gpio_count;
static DEFINE_SPINLOCK(ath79_gpio_lock);
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -110,6 +110,7 @@ static inline int soc_is_qca955x(void)
}
extern void __iomem *ath79_ddr_base;
+extern void __iomem *ath79_gpio_base;
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;

View file

@ -1,37 +0,0 @@
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -22,6 +22,7 @@
#include "common.h"
static DEFINE_SPINLOCK(ath79_device_reset_lock);
+static DEFINE_MUTEX(ath79_flash_mutex);
u32 ath79_cpu_freq;
EXPORT_SYMBOL_GPL(ath79_cpu_freq);
@@ -109,3 +110,16 @@ void ath79_device_reset_clear(u32 mask)
spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
}
EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+
+void ath79_flash_acquire(void)
+{
+ mutex_lock(&ath79_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ath79_flash_acquire);
+
+void ath79_flash_release(void)
+{
+ mutex_unlock(&ath79_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ath79_flash_release);
+
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -137,4 +137,7 @@ static inline u32 ath79_reset_rr(unsigne
void ath79_device_reset_set(u32 mask);
void ath79_device_reset_clear(u32 mask);
+void ath79_flash_acquire(void);
+void ath79_flash_release(void);
+
#endif /* __ASM_MACH_ATH79_H */

View file

@ -1,45 +0,0 @@
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -136,6 +136,7 @@ static inline u32 ath79_reset_rr(unsigne
void ath79_device_reset_set(u32 mask);
void ath79_device_reset_clear(u32 mask);
+u32 ath79_device_reset_get(u32 mask);
void ath79_flash_acquire(void);
void ath79_flash_release(void);
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -111,6 +111,32 @@ void ath79_device_reset_clear(u32 mask)
}
EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+u32 ath79_device_reset_get(u32 mask)
+{
+ unsigned long flags;
+ u32 reg;
+ u32 ret;
+
+ if (soc_is_ar71xx())
+ reg = AR71XX_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar724x())
+ reg = AR724X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar913x())
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar934x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+
+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ ret = ath79_reset_rr(reg);
+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ath79_device_reset_get);
+
void ath79_flash_acquire(void)
{
mutex_lock(&ath79_flash_mutex);

View file

@ -1,47 +0,0 @@
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
void ath79_gpio_function_enable(u32 mask);
void ath79_gpio_function_disable(u32 mask);
void ath79_gpio_function_setup(u32 set, u32 clear);
+void ath79_gpio_output_select(unsigned gpio, u8 val);
void ath79_gpio_init(void);
#endif /* __ATH79_COMMON_H */
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -198,6 +198,34 @@ void ath79_gpio_function_setup(u32 set,
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
}
+void __init ath79_gpio_output_select(unsigned gpio, u8 val)
+{
+ void __iomem *base = ath79_gpio_base;
+ unsigned long flags;
+ unsigned int reg;
+ u32 t, s;
+
+ BUG_ON(!soc_is_ar934x());
+
+ if (gpio >= AR934X_GPIO_COUNT)
+ return;
+
+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
+ s = 8 * (gpio % 4);
+
+ spin_lock_irqsave(&ath79_gpio_lock, flags);
+
+ t = __raw_readl(base + reg);
+ t &= ~(0xff << s);
+ t |= val << s;
+ __raw_writel(t, base + reg);
+
+ /* flush write */
+ (void) __raw_readl(base + reg);
+
+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+}
+
void __init ath79_gpio_init(void)
{
int err;

View file

@ -1,86 +0,0 @@
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -19,6 +19,8 @@
#include "common.h"
+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
+
static inline int is_valid_ram_addr(void *addr)
{
if (((u32) addr > KSEG0) &&
@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
return 0;
}
+static void __init ath79_prom_append_cmdline(const char *name,
+ const char *value)
+{
+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
+ " %s=%s", name, value);
+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
+}
+
+static const char * __init ath79_prom_find_env(char **envp, const char *name)
+{
+ const char *ret = NULL;
+ int len;
+ char **p;
+
+ if (!is_valid_ram_addr(envp))
+ return NULL;
+
+ len = strlen(name);
+ for (p = envp; is_valid_ram_addr(*p); p++) {
+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
+ ret = *p + len + 1;
+ break;
+ }
+
+ /* RedBoot env comes in pointer pairs - key, value */
+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
+ if (is_valid_ram_addr(*(++p))) {
+ ret = *p;
+ break;
+ }
+ }
+
+ return ret;
+}
+
static __init void ath79_prom_init_cmdline(int argc, char **argv)
{
int i;
@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
void __init prom_init(void)
{
+ const char *env;
+ char **envp;
+
ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+
+ envp = (char **)fw_arg2;
+ if (!strstr(arcs_cmdline, "ethaddr=")) {
+ env = ath79_prom_find_env(envp, "ethaddr");
+ if (env)
+ ath79_prom_append_cmdline("ethaddr", env);
+ }
+
+ if (!strstr(arcs_cmdline, "board=")) {
+ env = ath79_prom_find_env(envp, "board");
+ if (env) {
+ /* Workaround for buggy bootloaders */
+ if (strcmp(env, "RouterStation") == 0 ||
+ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
+ env = "UBNT-RS";
+
+ if (strcmp(env, "RouterStation PRO") == 0)
+ env = "UBNT-RSPRO";
+
+ ath79_prom_append_cmdline("board", env);
+ }
+ }
}
void __init prom_free_prom_memory(void)

View file

@ -1,58 +0,0 @@
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -16,6 +16,7 @@
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
+#include <asm/fw/myloader/myloader.h>
#include "common.h"
@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
return ret;
}
+static int __init ath79_prom_init_myloader(void)
+{
+ struct myloader_info *mylo;
+ char mac_buf[32];
+ unsigned char *mac;
+
+ mylo = myloader_get_info();
+ if (!mylo)
+ return 0;
+
+ switch (mylo->did) {
+ case DEVID_COMPEX_WP543:
+ ath79_prom_append_cmdline("board", "WP543");
+ break;
+ case DEVID_COMPEX_WPE72:
+ ath79_prom_append_cmdline("board", "WPE72");
+ break;
+ default:
+ pr_warn("prom: unknown device id: %x\n", mylo->did);
+ return 0;
+ }
+
+ mac = mylo->macs[0];
+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+
+ ath79_prom_append_cmdline("ethaddr", mac_buf);
+
+ return 1;
+}
+
static __init void ath79_prom_init_cmdline(int argc, char **argv)
{
int i;
@@ -88,6 +120,9 @@ void __init prom_init(void)
const char *env;
char **envp;
+ if (ath79_prom_init_myloader())
+ return;
+
ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
envp = (char **)fw_arg2;

View file

@ -1,57 +0,0 @@
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
return ret;
}
+#ifdef CONFIG_IMAGE_CMDLINE_HACK
+extern char __image_cmdline[];
+
+static int __init ath79_use_image_cmdline(void)
+{
+ char *p = __image_cmdline;
+ int replace = 0;
+
+ if (*p == '-') {
+ replace = 1;
+ p++;
+ }
+
+ if (*p == '\0')
+ return 0;
+
+ if (replace) {
+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
+ } else {
+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+ }
+
+ return 1;
+}
+#else
+static inline int ath79_use_image_cmdline(void) { return 0; }
+#endif
+
static int __init ath79_prom_init_myloader(void)
{
struct myloader_info *mylo;
@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
ath79_prom_append_cmdline("ethaddr", mac_buf);
+ ath79_use_image_cmdline();
+
return 1;
}
@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
{
int i;
+ if (ath79_use_image_cmdline())
+ return;
+
if (!is_valid_ram_addr(argv))
return;

View file

@ -1,11 +0,0 @@
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -225,6 +225,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = clk_get_rate(clk) / 2;
}
+__setup("board=", mips_machtype_setup);
+
static int __init ath79_setup(void)
{
ath79_gpio_init();

View file

@ -1,14 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -24,7 +24,10 @@
#include "dev-wmac.h"
static u8 ath79_wmac_mac[ETH_ALEN];
-static struct ath9k_platform_data ath79_wmac_data;
+
+static struct ath9k_platform_data ath79_wmac_data = {
+ .led_pin = -1,
+};
static struct resource ath79_wmac_resources[] = {
{

View file

@ -1,18 +0,0 @@
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -87,6 +87,15 @@ void __init ath79_register_uart(void)
if (IS_ERR(clk))
panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+ if (soc_is_ar71xx())
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
+ else if (soc_is_ar724x())
+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
+ else if (soc_is_ar913x())
+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
+ else if (soc_is_ar933x())
+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
+
if (soc_is_ar71xx() ||
soc_is_ar724x() ||
soc_is_ar913x() ||

View file

@ -1,61 +0,0 @@
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
/* nothing to do */
}
+static void prom_enable_uart(u32 id)
+{
+ void __iomem *gpio_base;
+ u32 uart_en;
+ u32 t;
+
+ switch (id) {
+ case REV_ID_MAJOR_AR71XX:
+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
+ break;
+
+ case REV_ID_MAJOR_AR7240:
+ case REV_ID_MAJOR_AR7241:
+ case REV_ID_MAJOR_AR7242:
+ uart_en = AR724X_GPIO_FUNC_UART_EN;
+ break;
+
+ case REV_ID_MAJOR_AR913X:
+ uart_en = AR913X_GPIO_FUNC_UART_EN;
+ break;
+
+ case REV_ID_MAJOR_AR9330:
+ case REV_ID_MAJOR_AR9331:
+ uart_en = AR933X_GPIO_FUNC_UART_EN;
+ break;
+
+ case REV_ID_MAJOR_AR9341:
+ case REV_ID_MAJOR_AR9342:
+ case REV_ID_MAJOR_AR9344:
+ /* TODO */
+ default:
+ return;
+ }
+
+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
+ t |= uart_en;
+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
+}
+
static void prom_putchar_init(void)
{
void __iomem *base;
@@ -85,8 +125,10 @@ static void prom_putchar_init(void)
default:
_prom_putchar = prom_putchar_dummy;
- break;
+ return;
}
+
+ prom_enable_uart(id);
}
void prom_putchar(unsigned char ch)

View file

@ -1,21 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -180,3 +180,9 @@ void __init ath79_register_wmac(u8 *cal_
platform_device_register(&ath79_wmac_device);
}
+
+void __init ath79_register_wmac_simple(void)
+{
+ ath79_register_wmac(NULL, NULL);
+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
+}
--- a/arch/mips/ath79/dev-wmac.h
+++ b/arch/mips/ath79/dev-wmac.h
@@ -13,5 +13,6 @@
#define _ATH79_DEV_WMAC_H
void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+void ath79_register_wmac_simple(void);
#endif /* _ATH79_DEV_WMAC_H */

View file

@ -1,166 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -156,6 +156,137 @@ static void qca955x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
}
+static bool __init
+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
+{
+ int timeout = 1000;
+ u32 val;
+
+ __raw_readl(base + AR9300_OTP_BASE + (4 * addr));
+ while (timeout--) {
+ val = __raw_readl(base + AR9300_OTP_STATUS);
+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
+ break;
+
+ udelay(10);
+ }
+
+ if (!timeout)
+ return false;
+
+ *data = __raw_readl(base + AR9300_OTP_READ_DATA);
+ return true;
+}
+
+static bool __init
+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
+{
+ u32 data;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ int offset = 8 * ((addr - i) % 4);
+
+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
+ return false;
+
+ dest[i] = (data >> offset) & 0xff;
+ }
+
+ return true;
+}
+
+static bool __init
+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
+ int dest_start, int dest_len)
+{
+ int dest_bytes = 0;
+ int offset = 0;
+ int end = addr - len;
+ u8 hdr[2];
+
+ while (addr > end) {
+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
+ return false;
+
+ addr -= 2;
+ offset += hdr[0];
+
+ if (offset <= dest_start + dest_len &&
+ offset + len >= dest_start) {
+ int data_offset = 0;
+ int dest_offset = 0;
+ int copy_len;
+
+ if (offset < dest_start)
+ data_offset = dest_start - offset;
+ else
+ dest_offset = offset - dest_start;
+
+ copy_len = len - data_offset;
+ if (copy_len > dest_len - dest_offset)
+ copy_len = dest_len - dest_offset;
+
+ ar93xx_wmac_otp_read(base, addr - data_offset,
+ dest + dest_offset,
+ copy_len);
+
+ dest_bytes += copy_len;
+ }
+ addr -= hdr[1];
+ }
+ return !!dest_bytes;
+}
+
+bool __init ar93xx_wmac_read_mac_address(u8 *dest)
+{
+ void __iomem *base;
+ bool ret = false;
+ int addr = 0x1ff;
+ unsigned int len;
+ u32 hdr_u32;
+ u8 *hdr = (u8 *) &hdr_u32;
+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
+ int mac_start = 2, mac_end = 8;
+
+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
+ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
+ while (addr > sizeof(hdr)) {
+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
+ break;
+
+ if (hdr_u32 == 0 || hdr_u32 == ~0)
+ break;
+
+ len = (hdr[1] << 4) | (hdr[2] >> 4);
+ addr -= 4;
+
+ switch (hdr[0] >> 5) {
+ case 0:
+ if (len < mac_end)
+ break;
+
+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
+ ret = true;
+ break;
+ case 3:
+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
+ mac_start, 6);
+ break;
+ default:
+ break;
+ }
+
+ addr -= len + 2;
+ }
+
+ iounmap(base);
+ if (ret)
+ memcpy(dest, mac, 6);
+
+ return ret;
+}
+
void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
{
if (soc_is_ar913x())
--- a/arch/mips/ath79/dev-wmac.h
+++ b/arch/mips/ath79/dev-wmac.h
@@ -14,5 +14,6 @@
void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
void ath79_register_wmac_simple(void);
+bool ar93xx_wmac_read_mac_address(u8 *dest);
#endif /* _ATH79_DEV_WMAC_H */
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -113,6 +113,14 @@
#define QCA955X_EHCI1_BASE 0x1b400000
#define QCA955X_EHCI_SIZE 0x200
+#define AR9300_OTP_BASE 0x14000
+#define AR9300_OTP_STATUS 0x15f18
+#define AR9300_OTP_STATUS_TYPE 0x7
+#define AR9300_OTP_STATUS_VALID 0x4
+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
+#define AR9300_OTP_STATUS_SM_BUSY 0x1
+#define AR9300_OTP_READ_DATA 0x15f1c
+
/*
* DDR_CTRL block
*/

View file

@ -1,31 +0,0 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -287,6 +287,16 @@ bool __init ar93xx_wmac_read_mac_address
return ret;
}
+void __init ath79_wmac_disable_2ghz(void)
+{
+ ath79_wmac_data.disable_2ghz = true;
+}
+
+void __init ath79_wmac_disable_5ghz(void)
+{
+ ath79_wmac_data.disable_5ghz = true;
+}
+
void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
{
if (soc_is_ar913x())
--- a/arch/mips/ath79/dev-wmac.h
+++ b/arch/mips/ath79/dev-wmac.h
@@ -14,6 +14,9 @@
void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
void ath79_register_wmac_simple(void);
+void ath79_wmac_disable_2ghz(void);
+void ath79_wmac_disable_5ghz(void);
+
bool ar93xx_wmac_read_mac_address(u8 *dest);
#endif /* _ATH79_DEV_WMAC_H */

View file

@ -1,340 +0,0 @@
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -21,6 +21,10 @@
#include <linux/bitops.h>
#define AR71XX_APB_BASE 0x18000000
+#define AR71XX_GE0_BASE 0x19000000
+#define AR71XX_GE0_SIZE 0x10000
+#define AR71XX_GE1_BASE 0x1a000000
+#define AR71XX_GE1_SIZE 0x10000
#define AR71XX_EHCI_BASE 0x1b000000
#define AR71XX_EHCI_SIZE 0x1000
#define AR71XX_OHCI_BASE 0x1c000000
@@ -40,6 +44,8 @@
#define AR71XX_PLL_SIZE 0x100
#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
#define AR71XX_RESET_SIZE 0x100
+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
+#define AR71XX_MII_SIZE 0x100
#define AR71XX_PCI_MEM_BASE 0x10000000
#define AR71XX_PCI_MEM_SIZE 0x07000000
@@ -82,17 +88,23 @@
#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR933X_UART_SIZE 0x14
+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
+#define AR933X_GMAC_SIZE 0x04
#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR933X_WMAC_SIZE 0x20000
#define AR933X_EHCI_BASE 0x1b000000
#define AR933X_EHCI_SIZE 0x1000
+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
+#define AR934X_GMAC_SIZE 0x14
#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR934X_WMAC_SIZE 0x20000
#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
#define AR934X_SRIF_SIZE 0x1000
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define AR934X_NFC_BASE 0x1b000200
+#define AR934X_NFC_SIZE 0xb8
#define QCA955X_PCI_MEM_BASE0 0x10000000
#define QCA955X_PCI_MEM_BASE1 0x12000000
@@ -112,6 +124,10 @@
#define QCA955X_EHCI0_BASE 0x1b000000
#define QCA955X_EHCI1_BASE 0x1b400000
#define QCA955X_EHCI_SIZE 0x200
+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
+#define QCA955X_GMAC_SIZE 0x40
+#define QCA955X_NFC_BASE 0x1b800200
+#define QCA955X_NFC_SIZE 0xb8
#define AR9300_OTP_BASE 0x14000
#define AR9300_OTP_STATUS 0x15f18
@@ -175,6 +191,9 @@
#define AR71XX_AHB_DIV_SHIFT 20
#define AR71XX_AHB_DIV_MASK 0x7
+#define AR71XX_ETH0_PLL_SHIFT 17
+#define AR71XX_ETH1_PLL_SHIFT 19
+
#define AR724X_PLL_REG_CPU_CONFIG 0x00
#define AR724X_PLL_REG_PCIE_CONFIG 0x18
@@ -187,6 +206,8 @@
#define AR724X_DDR_DIV_SHIFT 22
#define AR724X_DDR_DIV_MASK 0x3
+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
+
#define AR913X_PLL_REG_CPU_CONFIG 0x00
#define AR913X_PLL_REG_ETH_CONFIG 0x04
#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
@@ -199,6 +220,9 @@
#define AR913X_AHB_DIV_SHIFT 19
#define AR913X_AHB_DIV_MASK 0x1
+#define AR913X_ETH0_PLL_SHIFT 20
+#define AR913X_ETH1_PLL_SHIFT 22
+
#define AR933X_PLL_CPU_CONFIG_REG 0x00
#define AR933X_PLL_CLOCK_CTRL_REG 0x08
@@ -220,6 +244,8 @@
#define AR934X_PLL_CPU_CONFIG_REG 0x00
#define AR934X_PLL_DDR_CONFIG_REG 0x04
#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
@@ -252,9 +278,13 @@
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
+
#define QCA955X_PLL_CPU_CONFIG_REG 0x00
#define QCA955X_PLL_DDR_CONFIG_REG 0x04
#define QCA955X_PLL_CLK_CTRL_REG 0x08
+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
@@ -378,16 +408,83 @@
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
+#define AR933X_RESET_GE1_MDIO BIT(23)
+#define AR933X_RESET_GE0_MDIO BIT(22)
+#define AR933X_RESET_GE1_MAC BIT(13)
#define AR933X_RESET_WMAC BIT(11)
+#define AR933X_RESET_GE0_MAC BIT(9)
#define AR933X_RESET_USB_HOST BIT(5)
#define AR933X_RESET_USB_PHY BIT(4)
#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR934X_RESET_HOST BIT(31)
+#define AR934X_RESET_SLIC BIT(30)
+#define AR934X_RESET_HDMA BIT(29)
+#define AR934X_RESET_EXTERNAL BIT(28)
+#define AR934X_RESET_RTC BIT(27)
+#define AR934X_RESET_PCIE_EP_INT BIT(26)
+#define AR934X_RESET_CHKSUM_ACC BIT(25)
+#define AR934X_RESET_FULL_CHIP BIT(24)
+#define AR934X_RESET_GE1_MDIO BIT(23)
+#define AR934X_RESET_GE0_MDIO BIT(22)
+#define AR934X_RESET_CPU_NMI BIT(21)
+#define AR934X_RESET_CPU_COLD BIT(20)
+#define AR934X_RESET_HOST_RESET_INT BIT(19)
+#define AR934X_RESET_PCIE_EP BIT(18)
+#define AR934X_RESET_UART1 BIT(17)
+#define AR934X_RESET_DDR BIT(16)
+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define AR934X_RESET_NANDF BIT(14)
+#define AR934X_RESET_GE1_MAC BIT(13)
+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
+#define AR934X_RESET_HOST_DMA_INT BIT(10)
+#define AR934X_RESET_GE0_MAC BIT(9)
+#define AR934X_RESET_ETH_SWITCH BIT(8)
+#define AR934X_RESET_PCIE_PHY BIT(7)
+#define AR934X_RESET_PCIE BIT(6)
#define AR934X_RESET_USB_HOST BIT(5)
#define AR934X_RESET_USB_PHY BIT(4)
#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
+#define AR934X_RESET_LUT BIT(2)
+#define AR934X_RESET_MBOX BIT(1)
+#define AR934X_RESET_I2S BIT(0)
+
+#define QCA955X_RESET_HOST BIT(31)
+#define QCA955X_RESET_SLIC BIT(30)
+#define QCA955X_RESET_HDMA BIT(29)
+#define QCA955X_RESET_EXTERNAL BIT(28)
+#define QCA955X_RESET_RTC BIT(27)
+#define QCA955X_RESET_PCIE_EP_INT BIT(26)
+#define QCA955X_RESET_CHKSUM_ACC BIT(25)
+#define QCA955X_RESET_FULL_CHIP BIT(24)
+#define QCA955X_RESET_GE1_MDIO BIT(23)
+#define QCA955X_RESET_GE0_MDIO BIT(22)
+#define QCA955X_RESET_CPU_NMI BIT(21)
+#define QCA955X_RESET_CPU_COLD BIT(20)
+#define QCA955X_RESET_HOST_RESET_INT BIT(19)
+#define QCA955X_RESET_PCIE_EP BIT(18)
+#define QCA955X_RESET_UART1 BIT(17)
+#define QCA955X_RESET_DDR BIT(16)
+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define QCA955X_RESET_NANDF BIT(14)
+#define QCA955X_RESET_GE1_MAC BIT(13)
+#define QCA955X_RESET_SGMII_ANALOG BIT(12)
+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
+#define QCA955X_RESET_HOST_DMA_INT BIT(10)
+#define QCA955X_RESET_GE0_MAC BIT(9)
+#define QCA955X_RESET_SGMII BIT(8)
+#define QCA955X_RESET_PCIE_PHY BIT(7)
+#define QCA955X_RESET_PCIE BIT(6)
+#define QCA955X_RESET_USB_HOST BIT(5)
+#define QCA955X_RESET_USB_PHY BIT(4)
+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
+#define QCA955X_RESET_LUT BIT(2)
+#define QCA955X_RESET_MBOX BIT(1)
+#define QCA955X_RESET_I2S BIT(0)
+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
@@ -528,6 +625,12 @@
#define AR71XX_GPIO_REG_INT_ENABLE 0x24
#define AR71XX_GPIO_REG_FUNC 0x28
+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
#define AR934X_GPIO_REG_FUNC 0x6c
#define AR71XX_GPIO_COUNT 16
@@ -559,4 +662,133 @@
#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
+
+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
+
+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
+
+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
+
+#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
+#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
+#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
+
+#define AR934X_GPIO_OUT_GPIO 0x00
+
+/*
+ * MII_CTRL block
+ */
+#define AR71XX_MII_REG_MII0_CTRL 0x00
+#define AR71XX_MII_REG_MII1_CTRL 0x04
+
+#define AR71XX_MII_CTRL_IF_MASK 3
+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
+#define AR71XX_MII_CTRL_SPEED_MASK 3
+#define AR71XX_MII_CTRL_SPEED_10 0
+#define AR71XX_MII_CTRL_SPEED_100 1
+#define AR71XX_MII_CTRL_SPEED_1000 2
+
+#define AR71XX_MII0_CTRL_IF_GMII 0
+#define AR71XX_MII0_CTRL_IF_MII 1
+#define AR71XX_MII0_CTRL_IF_RGMII 2
+#define AR71XX_MII0_CTRL_IF_RMII 3
+
+#define AR71XX_MII1_CTRL_IF_RGMII 0
+#define AR71XX_MII1_CTRL_IF_RMII 1
+
+/*
+ * AR933X GMAC interface
+ */
+#define AR933X_GMAC_REG_ETH_CFG 0x00
+
+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
+
+/*
+ * AR934X GMAC Interface
+ */
+#define AR934X_GMAC_REG_ETH_CFG 0x00
+
+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
+
+/*
+ * QCA955X GMAC Interface
+ */
+
+#define QCA955X_GMAC_REG_ETH_CFG 0x00
+
+#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
+
#endif /* __ASM_MACH_AR71XX_REGS_H */

View file

@ -1,76 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -106,6 +106,20 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
+config ATH79_DEV_M25P80
+ select ATH79_DEV_SPI
+ def_bool n
+
+config ATH79_DEV_AP9X_PCI
+ select ATH79_PCI_ATH9K_FIXUP
+ def_bool n
+
+config ATH79_DEV_DSA
+ def_bool n
+
+config ATH79_DEV_ETH
+ def_bool n
+
config PCI_AR724X
def_bool n
@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS
config ATH79_DEV_LEDS_GPIO
def_bool n
+config ATH79_DEV_NFC
+ depends on (SOC_AR934X || SOC_QCA955X)
+ def_bool n
+
config ATH79_DEV_SPI
def_bool n
@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC
depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
def_bool n
+config ATH79_NVRAM
+ def_bool n
+
+config ATH79_PCI_ATH9K_FIXUP
+ def_bool n
+
+config ATH79_ROUTERBOOT
+ def_bool n
+
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o
# Devices
#
obj-y += dev-common.o
+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o
obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
#
+# Miscellaneous objects
+#
+obj-$(CONFIG_ATH79_NVRAM) += nvram.o
+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
+
+#
# Machines
#
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o

View file

@ -1,163 +0,0 @@
--- a/arch/mips/ath79/mach-ap121.c
+++ b/arch/mips/ath79/mach-ap121.c
@@ -1,19 +1,21 @@
/*
* Atheros AP121 board support
*
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
-#include "machtypes.h"
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
+#include "machtypes.h"
#define AP121_GPIO_LED_WLAN 0
#define AP121_GPIO_LED_USB 1
@@ -24,7 +26,14 @@
#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-#define AP121_CAL_DATA_ADDR 0x1fff1000
+#define AP121_MAC0_OFFSET 0x0000
+#define AP121_MAC1_OFFSET 0x0006
+#define AP121_CALDATA_OFFSET 0x1000
+#define AP121_WMAC_MAC_OFFSET 0x1002
+
+#define AP121_MINI_GPIO_LED_WLAN 0
+#define AP121_MINI_GPIO_BTN_JUMPSTART 12
+#define AP121_MINI_GPIO_BTN_RESET 11
static struct gpio_led ap121_leds_gpio[] __initdata = {
{
@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
}
};
-static struct ath79_spi_controller_data ap121_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
+static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
+ {
+ .name = "ap121:green:wlan",
+ .gpio = AP121_MINI_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
};
-static struct spi_board_info ap121_spi_info[] = {
+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
{
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l1606e",
- .controller_data = &ap121_spi0_data,
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP121_MINI_GPIO_BTN_RESET,
+ .active_low = 1,
}
};
-static struct ath79_spi_platform_data ap121_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
+static void __init ap121_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
+ art + AP121_WMAC_MAC_OFFSET);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+}
static void __init ap121_setup(void)
{
- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
+ ap121_common_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
ap121_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap121_gpio_keys),
ap121_gpio_keys);
-
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
ath79_register_usb();
- ath79_register_wmac(cal_data, NULL);
}
MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
ap121_setup);
+
+static void __init ap121_mini_setup(void)
+{
+ ap121_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
+ ap121_mini_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap121_mini_gpio_keys),
+ ap121_mini_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
+ ap121_mini_setup);
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -17,6 +17,7 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
ATH79_MACH_AP136, /* Atheros AP136 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */

View file

@ -1,128 +0,0 @@
--- a/arch/mips/ath79/mach-ap81.c
+++ b/arch/mips/ath79/mach-ap81.c
@@ -9,12 +9,16 @@
* by the Free Software Foundation.
*/
-#include "machtypes.h"
-#include "dev-wmac.h"
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
-#include "dev-spi.h"
+#include "dev-m25p80.h"
#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
#define AP81_GPIO_LED_STATUS 1
#define AP81_GPIO_LED_AOSS 3
@@ -29,6 +33,37 @@
#define AP81_CAL_DATA_ADDR 0x1fff1000
+static struct mtd_partition ap81_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x500000,
+ }, {
+ .name = "uImage",
+ .offset = 0x550000,
+ .size = 0x100000,
+ }, {
+ .name = "ART",
+ .offset = 0x650000,
+ .size = 0x1b0000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data ap81_flash_data = {
+ .parts = ap81_partitions,
+ .nr_parts = ARRAY_SIZE(ap81_partitions),
+};
+
static struct gpio_led ap81_leds_gpio[] __initdata = {
{
.name = "ap81:green:status",
@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
}
};
-static struct ath79_spi_controller_data ap81_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
-};
-
-static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
- .controller_data = &ap81_spi0_data,
- }
-};
-
-static struct ath79_spi_platform_data ap81_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
static void __init ap81_setup(void)
{
u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap81_gpio_keys),
ap81_gpio_keys);
- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
+ ath79_register_m25p80(&ap81_flash_data);
ath79_register_wmac(cal_data, NULL);
ath79_register_usb();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help

View file

@ -1,209 +0,0 @@
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -2,7 +2,7 @@
* Atheros DB120 reference board support
*
* Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -19,16 +19,26 @@
*/
#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
-#include "machtypes.h"
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
-#include "pci.h"
+#include "machtypes.h"
+#define DB120_GPIO_LED_USB 11
#define DB120_GPIO_LED_WLAN_5G 12
#define DB120_GPIO_LED_WLAN_2G 13
#define DB120_GPIO_LED_STATUS 14
@@ -39,8 +49,10 @@
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
+#define DB120_MAC0_OFFSET 0
+#define DB120_MAC1_OFFSET 6
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led db120_leds_gpio[] __initdata = {
{
@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
.gpio = DB120_GPIO_LED_WLAN_2G,
.active_low = 1,
},
+ {
+ .name = "db120:green:usb",
+ .gpio = DB120_GPIO_LED_USB,
+ .active_low = 1,
+ }
};
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
},
};
-static struct ath79_spi_controller_data db120_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
-static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
- .controller_data = &db120_spi0_data,
- }
+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
+ .led_ctrl0 = 0x00000000,
+ .led_ctrl1 = 0xc737c737,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00c30c00,
+ .open_drain = true,
};
-static struct ath79_spi_platform_data db120_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
+static struct ar8327_platform_data db120_ar8327_data = {
+ .pad0_cfg = &db120_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &db120_ar8327_led_cfg,
};
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data db120_ath9k_data;
-
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &db120_ath9k_data;
- break;
- }
-
- return 0;
-}
-
-static void __init db120_pci_init(u8 *eeprom)
-{
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
- sizeof(db120_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void db120_pci_init(void) {}
-#endif /* CONFIG_PCI */
+static struct mdio_board_info db120_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &db120_ar8327_data,
+ },
+};
static void __init db120_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
+ ath79_register_m25p80(NULL);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
db120_leds_gpio);
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
ARRAY_SIZE(db120_gpio_keys),
db120_gpio_keys);
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
ath79_register_usb();
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(db120_mdio0_info,
+ ARRAY_SIZE(db120_mdio0_info));
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ ath79_register_nfc();
}
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help

View file

@ -1,153 +0,0 @@
--- a/arch/mips/ath79/mach-pb44.c
+++ b/arch/mips/ath79/mach-pb44.c
@@ -8,23 +8,48 @@
* by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/vsc7385.h>
-#include "machtypes.h"
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
+#include "machtypes.h"
#include "pci.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
+#define PB44_PCF8757_VSC7395_CS 0
+#define PB44_PCF8757_STEREO_CS 1
+#define PB44_PCF8757_SLIC_CS0 2
+#define PB44_PCF8757_SLIC_TEST 3
+#define PB44_PCF8757_SLIC_INT0 4
+#define PB44_PCF8757_SLIC_INT1 5
+#define PB44_PCF8757_SW_RESET 6
+#define PB44_PCF8757_SW_JUMP 8
+#define PB44_PCF8757_LED_JUMP1 9
+#define PB44_PCF8757_LED_JUMP2 10
+#define PB44_PCF8757_TP24 11
+#define PB44_PCF8757_TP25 12
+#define PB44_PCF8757_TP26 13
+#define PB44_PCF8757_TP27 14
+#define PB44_PCF8757_TP28 15
+
#define PB44_GPIO_EXP_BASE 16
+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
.cs_line = 0,
};
+static struct ath79_spi_controller_data pb44_spi1_data = {
+ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
+ .cs_line = PB44_GPIO_VSC7395_CS,
+};
+
+static void pb44_vsc7395_reset(void)
+{
+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
+ udelay(10);
+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
+ mdelay(50);
+}
+
+static struct vsc7385_platform_data pb44_vsc7395_data = {
+ .reset = pb44_vsc7395_reset,
+ .ucode_name = "vsc7395_ucode_pb44.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 1,
+ .clk_sel = 0,
+ },
+};
+
+static const char *pb44_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data pb44_flash_data = {
+ .part_probes = pb44_part_probes,
+};
+
static struct spi_board_info pb44_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p64",
+ .platform_data = &pb44_flash_data,
.controller_data = &pb44_spi0_data,
},
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-vsc7385",
+ .platform_data = &pb44_vsc7395_data,
+ .controller_data = &pb44_spi1_data,
+ }
};
static struct ath79_spi_platform_data pb44_spi_data = {
.bus_num = 0,
- .num_chipselect = 1,
+ .num_chipselect = 2,
};
+#define PB44_WAN_PHYMASK BIT(0)
+#define PB44_LAN_PHYMASK 0
+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
+
static void __init pb44_init(void)
{
i2c_register_board_info(0, pb44_i2c_board_info,
@@ -122,6 +192,22 @@ static void __init pb44_init(void)
ARRAY_SIZE(pb44_spi_info));
ath79_register_usb();
ath79_register_pci();
+
+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI

View file

@ -1,109 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM (rev 1.0) board"
select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
help
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -16,10 +16,11 @@
#include <asm/mach-ath79/irq.h>
-#include "machtypes.h"
+#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
-#include "dev-spi.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
@@ -32,7 +33,7 @@
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
+#define UBNT_XM_EEPROM_ADDR 0x1fff1000
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
{
@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
}
};
-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
-};
-
-static struct spi_board_info ubnt_xm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- .controller_data = &ubnt_xm_spi0_data,
- }
-};
-
-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ubnt_xm_eeprom_data;
-
-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &ubnt_xm_eeprom_data;
- break;
- }
-
- return 0;
-}
-
-static void __init ubnt_xm_pci_init(void)
-{
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void ubnt_xm_pci_init(void) {}
-#endif /* CONFIG_PCI */
-
static void __init ubnt_xm_init(void)
{
+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
ubnt_xm_leds_gpio);
@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
ARRAY_SIZE(ubnt_xm_gpio_keys),
ubnt_xm_gpio_keys);
- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
- ARRAY_SIZE(ubnt_xm_spi_info));
-
- ubnt_xm_pci_init();
+ ath79_register_m25p80(NULL);
+ ap91_pci_init(eeprom, NULL);
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,

View file

@ -1,343 +0,0 @@
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -12,16 +12,22 @@
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
#include "machtypes.h"
-#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
@@ -37,19 +43,19 @@
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
{
- .name = "ubnt-xm:red:link1",
+ .name = "ubnt:red:link1",
.gpio = UBNT_XM_GPIO_LED_L1,
.active_low = 0,
}, {
- .name = "ubnt-xm:orange:link2",
+ .name = "ubnt:orange:link2",
.gpio = UBNT_XM_GPIO_LED_L2,
.active_low = 0,
}, {
- .name = "ubnt-xm:green:link3",
+ .name = "ubnt:green:link3",
.gpio = UBNT_XM_GPIO_LED_L3,
.active_low = 0,
}, {
- .name = "ubnt-xm:green:link4",
+ .name = "ubnt:green:link4",
.gpio = UBNT_XM_GPIO_LED_L4,
.active_low = 0,
},
@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
}
};
+#define UBNT_M_WAN_PHYMASK BIT(4)
+
static void __init ubnt_xm_init(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
ubnt_xm_leds_gpio);
@@ -79,9 +89,242 @@ static void __init ubnt_xm_init(void)
ath79_register_m25p80(NULL);
ap91_pci_init(eeprom, NULL);
+
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+ ath79_register_eth(0);
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
"UBNT-XM",
"Ubiquiti Networks XM (rev 1.0) board",
ubnt_xm_init);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
+ ubnt_xm_init);
+
+static void __init ubnt_rocket_m_setup(void)
+{
+ ubnt_xm_init();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
+ ubnt_rocket_m_setup);
+
+static void __init ubnt_nano_m_setup(void)
+{
+ ubnt_xm_init();
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
+ ubnt_nano_m_setup);
+
+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:globe",
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:power",
+ .gpio = 11,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }
+};
+
+static void __init ubnt_airrouter_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+ ath79_register_usb();
+
+ ap91_pci_init(ee, NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
+ ubnt_airrouter_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
+ ubnt_airrouter_setup);
+
+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:orange:dome",
+ .gpio = 1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:dome",
+ .gpio = 0,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:orange:front",
+ .gpio = 1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:front",
+ .gpio = 0,
+ .active_low = 0,
+ }
+};
+
+static void __init ubnt_unifi_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
+ ubnt_unifi_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
+ ubnt_unifi_setup);
+
+
+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4)
+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+static void __init ubnt_unifi_outdoor_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
+ UBNT_UNIFIOD_2ND_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
+ ubnt_unifi_outdoor_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
+ "Ubiquiti UniFiAP Outdoor",
+ ubnt_unifi_outdoor_setup);
+
+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
+ {
+ .name = "ubnt:white:dome",
+ .gpio = 12,
+ }, {
+ .name = "ubnt:blue:dome",
+ .gpio = 13,
+ }
+};
+
+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 17,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data uap_pro_ar8327_data = {
+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info uap_pro_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &uap_pro_ar8327_data,
+ },
+};
+
+#define UAP_PRO_MAC0_OFFSET 0x0000
+#define UAP_PRO_MAC1_OFFSET 0x0006
+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000
+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000
+
+static void __init ubnt_uap_pro_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
+ ubnt_uap_pro_gpio_leds);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(uap_pro_gpio_keys),
+ uap_pro_gpio_keys);
+
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(uap_pro_mdio0_info,
+ ARRAY_SIZE(uap_pro_mdio0_info));
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
+ ubnt_uap_pro_setup);
+
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
Atheros PB44 reference board.
config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
+ bool "Ubiquiti Networks XM/UniFi boards"
select SOC_AR724X
+ select SOC_AR934X
select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -22,6 +22,13 @@ enum ath79_mach_type {
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
};

View file

@ -1,291 +0,0 @@
--- a/arch/mips/ath79/mach-ap136.c
+++ b/arch/mips/ath79/mach-ap136.c
@@ -1,5 +1,5 @@
/*
- * Qualcomm Atheros AP136 reference board support
+ * Atheros AP136 reference board support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
@@ -18,23 +18,28 @@
*
*/
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
-#include "machtypes.h"
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
#include "dev-leds-gpio.h"
-#include "dev-spi.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
#include "dev-usb.h"
#include "dev-wmac.h"
-#include "pci.h"
+#include "machtypes.h"
-#define AP136_GPIO_LED_STATUS_RED 14
-#define AP136_GPIO_LED_STATUS_GREEN 19
#define AP136_GPIO_LED_USB 4
-#define AP136_GPIO_LED_WLAN_2G 13
#define AP136_GPIO_LED_WLAN_5G 12
+#define AP136_GPIO_LED_WLAN_2G 13
+#define AP136_GPIO_LED_STATUS_RED 14
#define AP136_GPIO_LED_WPS_RED 15
+#define AP136_GPIO_LED_STATUS_GREEN 19
#define AP136_GPIO_LED_WPS_GREEN 20
#define AP136_GPIO_BTN_WPS 16
@@ -43,8 +48,10 @@
#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-#define AP136_WMAC_CALDATA_OFFSET 0x1000
-#define AP136_PCIE_CALDATA_OFFSET 0x5000
+#define AP136_MAC0_OFFSET 0
+#define AP136_MAC1_OFFSET 6
+#define AP136_WMAC_CALDATA_OFFSET 0x1000
+#define AP136_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led ap136_leds_gpio[] __initdata = {
{
@@ -98,64 +105,158 @@ static struct gpio_keys_button ap136_gpi
},
};
-static struct ath79_spi_controller_data ap136_spi0_data = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
+
+static struct ar8327_platform_data ap136_ar8327_data = {
+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
};
-static struct spi_board_info ap136_spi_info[] = {
+static struct mdio_board_info ap136_mdio0_info[] = {
{
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- .controller_data = &ap136_spi0_data,
- }
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &ap136_ar8327_data,
+ },
};
-static struct ath79_spi_platform_data ap136_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
+static void __init ap136_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ap136_ath9k_data;
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-{
- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
- dev->dev.platform_data = &ap136_ath9k_data;
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
- return 0;
-}
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+ t |= QCA955X_ETH_CFG_RGMII_EN;
-static void __init ap136_pci_init(u8 *eeprom)
-{
- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
- sizeof(ap136_ath9k_data.eeprom_data));
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
- ath79_register_pci();
+ iounmap(base);
}
-#else
-static inline void ap136_pci_init(void) {}
-#endif /* CONFIG_PCI */
-static void __init ap136_setup(void)
+static void __init ap136_common_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ ath79_register_m25p80(NULL);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
ap136_leds_gpio);
ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap136_gpio_keys),
ap136_gpio_keys);
- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
- ARRAY_SIZE(ap136_spi_info));
+
ath79_register_usb();
- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
+ ath79_register_nfc();
+
+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+
+ ap136_gmac_setup();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
+
+ mdiobus_register_board_info(ap136_mdio0_info,
+ ARRAY_SIZE(ap136_mdio0_info));
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected tot eh SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+}
+
+static void __init ap136_010_setup(void)
+{
+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
+ ap136_ar8327_pad0_cfg.txclk_delay_en = true;
+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+
+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ap136_common_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+ "Atheros AP136-010 reference board",
+ ap136_010_setup);
+
+static void __init ap136_020_setup(void)
+{
+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
+
+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ap136_common_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
+ "Atheros AP136-020 reference board",
+ ap136_020_setup);
+
+/*
+ * AP135-020 is similar to AP136-020, any future AP135 specific init
+ * code can be added here.
+ */
+static void __init ap135_020_setup(void)
+{
+ ap136_leds_gpio[0].name = "ap135:green:status";
+ ap136_leds_gpio[1].name = "ap135:red:status";
+ ap136_leds_gpio[2].name = "ap135:green:wps";
+ ap136_leds_gpio[3].name = "ap135:red:wps";
+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
+ ap136_leds_gpio[5].name = "ap135:red:usb";
+
+ ap136_020_setup();
}
-MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
- ap136_setup);
+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
+ "Atheros AP135-020 reference board",
+ ap135_020_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -18,7 +18,9 @@ enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
- ATH79_MACH_AP136, /* Atheros AP136 reference board */
+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
+ ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
Atheros AP121 reference board.
config ATH79_MACH_AP136
- bool "Atheros AP136 reference board"
+ bool "Atheros AP136/AP135 reference board"
select SOC_QCA955X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
- Atheros AP136 reference board.
+ Atheros AP136 or AP135 reference boards.
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"

View file

@ -1,854 +0,0 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,112 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
+ ATH79_MACH_PB42, /* Atheros PB42 */
+ ATH79_MACH_PB92, /* Atheros PB92 */
+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
};
#endif /* _ATH79_MACHTYPE_H */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,61 @@ if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
+config ATH79_MACH_ALFA_AP96
+ bool "ALFA Network AP96 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+
+config ATH79_MACH_HORNET_UB
+ bool "ALFA Network Hornet-UB board support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ALFA_NX
+ bool "ALFA Network N2/N5 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_ALL0258N
+ bool "Allnet ALL0258N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_ALL0315N
+ bool "Allnet ALL0315N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_PB9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_ETH
+
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
@@ -41,6 +96,24 @@ config ATH79_MACH_AP81
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
+config ATH79_MACH_AP83
+ bool "Atheros AP83 board support"
+ select SOC_AR913X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_AP96
+ bool "Atheros AP96 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
@@ -56,6 +129,13 @@ config ATH79_MACH_DB120
Say 'Y' here if you want your kernel to support the
Atheros DB120 reference board.
+config ATH79_MACH_PB42
+ bool "Atheros PB42 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
@@ -68,6 +148,488 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
+config ATH79_MACH_PB92
+ bool "Atheros PB92 board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_PB9X_PCI if PCI
+ select ATH79_DEV_USB
+
+config ATH79_MACH_AW_NR580
+ bool "AzureWave AW-NR580 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WHR_HP_G300N
+ bool "Buffalo WHR-HP-G300N board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WLAE_AG300N
+ bool "Buffalo WLAE-AG300N board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_WZR_HP_AG300H
+ bool "Buffalo WZR-HP-AG300H board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G300NH
+ bool "Buffalo WZR-HP-G300NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select RTL8366_SMI
+
+config ATH79_MACH_WZR_HP_G300NH2
+ bool "Buffalo WZR-HP-G300NH2 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WZR_HP_G450H
+ bool "Buffalo WZR-HP-G450H board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WP543
+ bool "Compex WP543/WPJ543 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_WPE72
+ bool "Compex WPE72/WPE72NX board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_DIR_600_A1
+ bool "D-Link DIR-600 A1/DIR-615 E4 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_NVRAM
+
+config ATH79_MACH_DIR_615_C1
+ bool "D-Link DIR-615 rev. C1 support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_EW_DORIN
+ bool "embedded wireless Dorin Platform support"
+ select SOC_AR933X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ help
+ Say 'Y' here if you want your kernel to support the
+ Dorin Platform from www.80211.de .
+
+config ATH79_MACH_JA76PF
+ bool "jjPlus JA76PF board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_JWAP003
+ bool "jjPlus JWAP003 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WRT160NL
+ bool "Linksys WRT160NL board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_WRT400N
+ bool "Linksys WRT400N board support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_RB4XX
+ bool "MikroTik RouterBOARD 4xx series support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+
+config ATH79_MACH_RB750
+ bool "MikroTik RouterBOARD 750 support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+ select RLE_DECOMPRESS
+
+config ATH79_MACH_RB2011
+ bool "MikroTik RouterBOARD 2011 support"
+ select SOC_AR934x
+ select ATH79_DEV_ETH
+ select ATH79_DEV_NFC
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_WNDR3700
+ bool "NETGEAR WNDR3700 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_WNDR4300
+ bool "NETGEAR WNDR4300 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WNR2000
+ bool "NETGEAR WNR2000 board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_OM2P
+ bool "OpenMesh OM2P board support"
+ select SOC_AR724X
+ select SOC_AR933X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR600
+ bool "OpenMesh MR600 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W04NU
+ bool "Planex MZK-W04NU board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MZK_W300NH
+ bool "Planex MZK-W300NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_RW2458N
+ bool "Redwave RW2458N board support"
+ select SOC_AR724X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_CAP4200AG
+ bool "Senao CAP4200AG support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3020
+ bool "TP-LINK TL-MR3020 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_MR3X20
+ bool "TP-LINK TL-MR3220/3420 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_TL_WA901ND
+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR703N
+ bool "TP-LINK TL-WR703N support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR741ND
+ bool "TP-LINK TL-WR741ND support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR741ND_V4
+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR841N_V1
+ bool "TP-LINK TL-WR841N v1 support"
+ select SOC_AR71XX
+ select ATH79_DEV_DSA
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+ bool "TP-LINK TL-WR841N/ND v8 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR941ND
+ bool "TP-LINK TL-WR941ND support"
+ select SOC_AR913X
+ select ATH79_DEV_DSA
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1041N_V2
+ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR1043ND
+ bool "TP-LINK TL-WR1043ND support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WR2543N
+ bool "TP-LINK TL-WR2543N/ND support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
+config ATH79_MACH_TEW_632BRP
+ bool "TRENDnet TEW-632BRP support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_TEW_673GRU
+ bool "TRENDnet TEW-673GRU support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_NVRAM
+
+config ATH79_MACH_TEW_712BR
+ bool "TRENDnet TEW-712BR support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_UBNT
+ bool "Ubiquiti AR71xx based boards support"
+ select SOC_AR71XX
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
select SOC_AR724X
@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+config ATH79_MACH_ZCN_1523H
+ bool "Zcomax ZCN-1523H support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_NBG460N
+ bool "Zyxel NBG460N/550N/550NH board support"
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
endmenu
config SOC_AR71XX
@@ -118,10 +698,6 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
-config ATH79_DEV_M25P80
- select ATH79_DEV_SPI
- def_bool n
-
config ATH79_DEV_AP9X_PCI
select ATH79_PCI_ATH9K_FIXUP
def_bool n
@@ -132,7 +708,14 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
-config PCI_AR724X
+config ATH79_DEV_M25P80
+ select ATH79_DEV_SPI
+ def_bool n
+
+config ATH79_DEV_DSA
+ def_bool n
+
+config ATH79_DEV_ETH
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
+config PCI_AR724X
+ def_bool n
+
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
+
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -180,6 +180,10 @@ void __init prom_init(void)
ath79_prom_append_cmdline("board", env);
}
}
+
+ if (strstr(arcs_cmdline, "board=750Gr3") ||
+ strstr(arcs_cmdline, "board=2011L"))
+ ath79_prom_append_cmdline("console", "ttyS0,115200");
}
void __init prom_free_prom_memory(void)

View file

@ -1,20 +0,0 @@
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
ctrl->ops->set_mdio_dir(ctrl, 0);
- /* check the turnaround bit: the PHY should be driving it to zero */
- if (mdiobb_get_bit(ctrl) != 0) {
- /* PHY didn't drive TA low -- flush any bits it
- * may be trying to send.
- */
- for (i = 0; i < 32; i++)
- mdiobb_get_bit(ctrl);
-
- return 0xffff;
- }
+ mdiobb_get_bit(ctrl);
ret = mdiobb_get_num(ctrl, 16);
mdiobb_get_bit(ctrl);

View file

@ -1,117 +0,0 @@
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -12,6 +12,7 @@
#define _ASM_CHECKSUM_H
#include <linux/in6.h>
+#include <linux/unaligned/packed_struct.h>
#include <asm/uaccess.h>
@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const
const unsigned int *stop = word + ihl;
unsigned int csum;
int carry;
+ unsigned int w;
- csum = word[0];
- csum += word[1];
- carry = (csum < word[1]);
+ csum = __get_unaligned_cpu32(word++);
+
+ w = __get_unaligned_cpu32(word++);
+ csum += w;
+ carry = (csum < w);
csum += carry;
- csum += word[2];
- carry = (csum < word[2]);
+ w = __get_unaligned_cpu32(word++);
+ csum += w;
+ carry = (csum < w);
csum += carry;
- csum += word[3];
- carry = (csum < word[3]);
+ w = __get_unaligned_cpu32(word++);
+ csum += w;
+ carry = (csum < w);
csum += carry;
- word += 4;
do {
- csum += *word;
- carry = (csum < *word);
+ w = __get_unaligned_cpu32(word++);
+ csum += w;
+ carry = (csum < w);
csum += carry;
- word++;
} while (word != stop);
return csum_fold(csum);
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -102,7 +102,7 @@ struct iphdr {
__be32 saddr;
__be32 daddr;
/*The options start here. */
-};
+} __packed __attribute__((aligned(2)));
#ifdef __KERNEL__
#include <linux/skbuff.h>
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -126,7 +126,7 @@ struct ipv6hdr {
struct in6_addr saddr;
struct in6_addr daddr;
-};
+} __packed __attribute__((aligned(2)));
#ifdef __KERNEL__
/*
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -54,7 +54,7 @@ struct tcphdr {
__be16 window;
__sum16 check;
__be16 urg_ptr;
-};
+} __packed __attribute__((aligned(2)));
/*
* The union cast uses a gcc extension to avoid aliasing problems
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -24,7 +24,7 @@ struct udphdr {
__be16 dest;
__be16 len;
__sum16 check;
-};
+} __packed __attribute__((aligned(2)));
/* UDP socket options */
#define UDP_CORK 1 /* Never send partially complete segments */
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -14,6 +14,7 @@
#include <linux/skbuff.h>
#include <linux/icmp.h>
#include <linux/sysctl.h>
+#include <linux/unaligned/packed_struct.h>
#include <net/route.h>
#include <net/ip.h>
@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru
if (ap == NULL)
return false;
- tuple->src.u3.ip = ap[0];
- tuple->dst.u3.ip = ap[1];
+ tuple->src.u3.ip = __get_unaligned_cpu32(ap++);
+ tuple->dst.u3.ip = __get_unaligned_cpu32(ap);
return true;
}

Some files were not shown because too many files have changed in this diff Show more