openwrtv4

Author	SHA1	Message	Date
Florian Fainelli	a747611fe3	brcm63xx: enable support for BCM63268 Support for the BCM63268 is usable, enable it by default. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39364	2014-01-21 18:50:26 +00:00
Florian Fainelli	eaa3e9ec6e	brcm63xx: add support for BCM963269BHR board Add kernel support for the BCM963269BHR board, USB and Ethernet switch, LEDs and buttons are working. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39363	2014-01-21 18:50:11 +00:00
Florian Fainelli	fed4b02a68	brcm63xx: improve BCM63268 support Allow using the HSSPI controller since it works just fine, as well as the integrated switch core, since that one works too. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39362	2014-01-21 18:49:50 +00:00
Jonas Gorski	d513c07d2f	brcm63xx: fix typo breaking build in r39325 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39326	2014-01-19 14:00:18 +00:00
Jonas Gorski	66ec204935	brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325	2014-01-19 13:46:25 +00:00
Jonas Gorski	ef81c6a268	brcm63xx: allow setting the number of usb host ports for boards Allow setting the number of available usb host ports for boards with additional sanity checks to allow using the second port on devices where it is available. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39324	2014-01-19 13:46:14 +00:00
Jonas Gorski	6b3e1c8de6	brcm63xx: add USB support for BCM63268 Add and enable USB support for the BCM63268 family of SoCs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39323	2014-01-19 13:46:05 +00:00
Jonas Gorski	33f426c795	brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI and BCM63XX_HAS_OHCI are not selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39322	2014-01-19 13:45:55 +00:00
Jonas Gorski	52b7f55cb3	brcm63xx: prevent usb clock state inconsistency on BCM6318 Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321	2014-01-19 13:45:42 +00:00
Florian Fainelli	0650ce9ec4	brcm63xx: do not add twice the same field to board Changeset r39302 updated a board section and added twice .has_ehci0, this is not necessary, so fix it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39304	2014-01-16 00:45:19 +00:00
Florian Fainelli	bf4f1feb7a	brcm63xx: add USB support to BCM6318 BCM6318 has a special initialization sequence which involves touching PLL control registers in the USBH_PRIV register space, as well as toggling a bit the Simulation control register. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39302	2014-01-15 19:05:57 +00:00
Florian Fainelli	3114410a13	brcm63xx: fix BCM96318MVWG LEDs Power LED is not active low, and ppp-fail is red, not green. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39294	2014-01-15 00:06:08 +00:00
Florian Fainelli	1f7edcf637	brcm63xx: remove config-3.11 This was not supposed to be committed, remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39293	2014-01-15 00:05:51 +00:00
Florian Fainelli	bd540554a4	brcm63xx: 96368MVWG supports USB gadget, enable it Enable the use of the USB gadget device at the board level so we can use bcm63xx_udc on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39292	2014-01-14 23:56:46 +00:00
Florian Fainelli	092a7105ec	brcm63xx: replace gadget driver build fix with upstream submission Also fixing a build warning due to a misplaced parenthesis in the previous submission. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39291	2014-01-14 23:56:28 +00:00
Florian Fainelli	01f465df05	brcm63xx: add support for the BCM96318REF_P300 board Very similar to the BCM96318REF board except for the name and the SDRAM/DDR configuration which is totally transparent for us. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39286	2014-01-14 05:24:19 +00:00
Florian Fainelli	6f48336dc4	brcm63xx: enable 6318 support BCM6318 support is usable enough to be enabled by default, turn it on. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39284	2014-01-14 05:23:58 +00:00
Florian Fainelli	93ab8adef2	brcm63xx: add basic support for the BCM96318REF board Add basic support for the BCM96318REF board which is comprised of: - HS-SPI flash support - Ethernet switch support - USB slave device support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39283	2014-01-14 05:23:49 +00:00
Florian Fainelli	0ecdc42f60	brcm63xx: improve BCM6318 support Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282	2014-01-14 05:23:39 +00:00
Florian Fainelli	7951993efd	brcm63xx: package the USB gadget module (bcm63xx_udc) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39281	2014-01-14 05:23:20 +00:00
Florian Fainelli	8bdc92f5d6	brcm63xx: target supports USB gadget devices Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39280	2014-01-14 05:23:08 +00:00
Florian Fainelli	fb8ae05760	brcm63xx: fix USB gadget build failure after 6345 Ethernet While adding support for BCM6345 Ethernet, some changes in the macros ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget driver fail to build. Fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39279	2014-01-14 05:22:59 +00:00
Florian Fainelli	a6425f8437	brcm63xx: allow HSSPI registration on 6318 A missing condition check in dev-hsspi.c prevented the controller from being registered on 6318 where it is fully functional. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39278	2014-01-14 05:22:45 +00:00
Florian Fainelli	49ae212eee	brcm63xx: fix build failure on varid varid might both unused and unitialized when building for e.g: bcm6318, fix these two warnings turned into errors. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39277	2014-01-14 05:22:31 +00:00
Jonas Gorski	e83c1ec61c	brcm63xx: fix ohci frame number offset BCM63XX's ohci controller does not need the frame number shift, but that was guarded with a PPC symbol. Fix this by making the no-fix generally available. This is a regression from the previous conversion to ohci platform driver. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39274	2014-01-13 12:21:08 +00:00
Jonas Gorski	1315058bda	brcm63xx: fix spi flash setup on (at least) some reference boards CFE seems to leave the SPI flash mapping in an invalid state after loading the kernel on some reference boards, so fix it up on boot. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39273	2014-01-13 12:14:12 +00:00
Jonas Gorski	4aa92df0d8	brcm63xx: add initial support for BCM6318 Add inital support for BCM6318, but keep it disabled for now until most things are supported. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39272	2014-01-13 12:14:02 +00:00
Jonas Gorski	3bdcf040aa	brcm63xx: add initial support for BCM63268 Add initial support for the BCM63268 family of SoCs, but keep it disabled for now as most things don't work yet. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39271	2014-01-13 12:13:51 +00:00
Jonas Gorski	ab8897045c	brcm63xx: fix the pcie window size The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big, not 16 MiB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39270	2014-01-13 12:13:39 +00:00
Jonas Gorski	76164e1a36	brcm63xx: add support for chip variants Some SoCs have variants which are mostly the same, but use a different chip id (or not). Add code for detecting them and handling them as their standard counterparts. This adds support for e.g. BCM6369. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39269	2014-01-13 12:13:26 +00:00
Jonas Gorski	db36359f48	brcm63xx: remove non runtime detect and refresh affinity patches Remove the non runtime detect code since its effectiveness is dubious and almost never used. Also update affinity patches to work on top of it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39268	2014-01-13 12:13:15 +00:00
Jonas Gorski	d8ac24b325	brcm63xx: update bmips patches with upstream submission Update bmips cleanup patches with upstream submission and backport a few bmips fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39267	2014-01-13 12:13:05 +00:00
Jonas Gorski	d9a20b6f46	brcm63xx: spi flash on legacy spi controller needs the workaround Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs additional fixes for M25P80, so it remains broken for now. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39266	2014-01-13 12:12:50 +00:00
Jonas Gorski	af7e570c3b	brcm63xx: fix legacy spi tranfers >= 256 bytes Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes are not affected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39265	2014-01-13 12:11:58 +00:00
Jonas Gorski	f08f0cafc2	brcm63xx: update HSSPI driver with upstream submission Update the HSSPI driver with the upstream submitted one that has a workaround for the auto cs down issue. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39264	2014-01-13 12:11:45 +00:00
Gabor Juhos	0e2586a774	kernel: update 3.10 to 3.10.26 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39220	2014-01-11 16:06:37 +00:00
Hauke Mehrtens	952db22551	kernel: update kernel 3.10 to 3.10.24 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39059	2013-12-15 19:16:30 +00:00
Gabor Juhos	f1ef0b92be	kernel: update 3.10 to 3.10.21 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38972	2013-12-01 09:59:53 +00:00
Gabor Juhos	35656042f1	kernel: update 3.10 to 3.10.18 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38652	2013-11-05 08:25:45 +00:00
Gabor Juhos	b6b06000eb	kernel: update 3.10 to 3.10.17 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506	2013-10-23 12:51:05 +00:00
Hauke Mehrtens	81e2f00367	kernel: update kernel to 3.10.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38384	2013-10-13 19:28:29 +00:00
Gabor Juhos	9c8a5ef115	kernel: update 3.10 to 3.10.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38228	2013-09-27 07:19:21 +00:00
Hauke Mehrtens	c75a970337	kernel: b53: add Register Access Bridge Registers (SRAB) interface The SRAB interface is used on BCM4707 and BCM5301X SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38198	2013-09-25 21:44:28 +00:00
Gabor Juhos	554772a665	kernel: update 3.10 to 3.10.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38000	2013-09-15 16:00:41 +00:00
Jonas Gorski	f8cd14921d	brcm63xx: drop linux 3.9 support It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37911	2013-09-06 19:01:17 +00:00
Jonas Gorski	dc028776f0	brcm63xx: switch to linux 3.10 3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37910	2013-09-06 19:01:13 +00:00
Gabor Juhos	043edd8074	kernel: update 3.10 to 3.10.9 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37832	2013-08-23 17:31:04 +00:00
Gabor Juhos	6a5b4ec7dc	kernel: update 3.9 to 3.9.11 Also refresh 3.9 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37501	2013-07-22 15:30:56 +00:00
Jonas Gorski	7ef37c8e3e	brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481	2013-07-20 11:30:26 +00:00
Felix Fietkau	9a9d97b749	bcm63xx: update ralink wlan firmware hotplug script for new eeprom size Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37337	2013-07-15 11:07:59 +00:00
Hauke Mehrtens	e574f75d16	kernel: update to kernel 3.9.10 and refresh patches SVN-Revision: 37274	2013-07-13 22:43:10 +00:00
Jonas Gorski	0d9f760f27	kernel: update linux 3.9 to 3.9.8 Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103	2013-06-30 13:10:12 +00:00
Jonas Gorski	6a4e78dca6	brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds - Some fixes for the incorrect GPIO assignment of leds on Huawei HW556. - Addition of unassigned (LAN) leds which can be found on the back of the device. Signed-off-by: Angga Reza Fardana <angga@norture.com> Patchwork: http://patchwork.openwrt.org/patch/3744/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37102	2013-06-30 13:10:08 +00:00
Jonas Gorski	7d1cd9dfab	bcm63xx: Improve CFE version mod patch. Fix "cfe-" string length copy. Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f. Add support for Huawei CFE versions ("cfe-vd"). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3766/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37101	2013-06-30 13:10:05 +00:00
Jonas Gorski	6df83c3f89	bcm63xx: enable all SoCs for both subtargets Now that SMP kernels also work on older SoCs, also enable them for SMP. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37100	2013-06-30 13:10:03 +00:00
Jonas Gorski	e7d93889d7	bcm63xx: make smp kernels boot on older SoCs Enhance BMIPS support so SMP kernels work on older chips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37099	2013-06-30 13:10:00 +00:00
Jonas Gorski	66f8f30f47	bcm63xx: update patches Update patches with their upstream versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37098	2013-06-30 13:09:50 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
Jonas Gorski	9a077f70de	bcm63xx: fix DSL-274xB F1 default network config Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37032	2013-06-24 20:35:54 +00:00
John Crispin	67f5f188b1	base-files: input/button drivers get loaded before preinit by procd Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000	2013-06-21 16:53:47 +00:00
John Crispin	e6ef318802	base-files: diag does not need to insmod any drivers, procd already did it for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999	2013-06-21 16:53:43 +00:00
Florian Fainelli	4ef56823e0	brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8 We currently used 16 DMA Ethernet channels, but the hardware only supports up to 8 (with 2 per enet and the remaining for USB slave). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36979	2013-06-20 18:47:36 +00:00
Florian Fainelli	28535aad38	brcm63xx: refresh 3.9 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36958	2013-06-18 10:54:28 +00:00
Florian Fainelli	a9d4bdee43	brcm63xx: provide a default sane MAC address for Cable Modem devices Cable modem devices currently poke at some random location in RAM and may end up having an invalid MAC address which is not suitable. Provide a default one which is sane. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36957	2013-06-18 10:54:24 +00:00
Florian Fainelli	8ae2b1155d	brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954	2013-06-17 22:57:04 +00:00
Florian Fainelli	0ce75bc440	brcm63xx: simplify HCS image creation $(KDIR)/vmlinux is already a binary image, there is no need to create another one. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36949	2013-06-17 19:32:56 +00:00
Florian Fainelli	78a66975d6	brcm63xx: remove support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36948	2013-06-17 19:32:47 +00:00
Florian Fainelli	d2894412d8	brcm63xx: switch to 3.9 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36947	2013-06-17 19:32:42 +00:00
Florian Fainelli	f03bbaf065	brcm63xx: fix missing antislash in BCM6345 ethernet patch This would cause build failure when disabling support for particular CPUs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36946	2013-06-17 19:32:35 +00:00
Florian Fainelli	2b9d084af9	brcm63xx: add user-space support for Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877	2013-06-06 22:22:20 +00:00
Florian Fainelli	42e69f45c7	brcm63xx: add kernel space and image support for the Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876	2013-06-06 22:22:14 +00:00
Florian Fainelli	966d47989b	brcm63xx: add Broadcom cable modem firmware format header Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36875	2013-06-06 22:22:09 +00:00
Florian Fainelli	600b59642e	brcm63xx: add support for BCM3368 Add support for the Broadcom BCM3368 cable modem chipset, includes: - Ethernet - SPI - UARTs - GPIOs - PCI Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36874	2013-06-06 22:21:58 +00:00
Jonas Gorski	1beaf031d1	target: don't build jffs2 nor images by default Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36863	2013-06-05 20:58:59 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Jonas Gorski	4d0fcd0c49	kernel: add some missing symbols/move them to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36670	2013-05-20 12:42:32 +00:00
Jonas Gorski	0a62b7c148	bcm63xx: add 3.9 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36660	2013-05-19 18:32:13 +00:00
Jonas Gorski	1f4e5f77a0	bcm63xx: Simplify CFE detection. Check bootloader argument in mtd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: split into two patches, one for detection, one letting bcm63xxpart use it.] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36659	2013-05-19 18:32:02 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Jonas Gorski	ed06d2ad5c	bcm63xx: don't build CRAMFS Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36616	2013-05-12 21:41:52 +00:00
Jonas Gorski	ccd7fbba87	led and buttons support for board DWV-S0 Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36615	2013-05-12 21:41:50 +00:00
Jonas Gorski	0a907fdb8a	bcm63xx: remove defconfig support All boards use uci-defaults, no need to keep defconfig support. SVN-Revision: 36610	2013-05-12 11:54:38 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
Jonas Gorski	24636fcabf	bcm63xx: split into two subtargets, generic and SMP Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527	2013-05-02 15:28:31 +00:00
Jonas Gorski	d11efa1428	bcm63xx: add SMP support for BCM6362 and BCM6368 BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36526	2013-05-02 15:28:26 +00:00
Jonas Gorski	a80a4f3ec2	bcm63xx: fix hsspi flash registration for BCM6362 Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36524	2013-05-02 15:28:10 +00:00
Jonas Gorski	999a956f4c	bcm63xx: fix/enable livebox minipci Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36523	2013-05-02 15:28:07 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Florian Fainelli	db02b0e4ee	brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36506	2013-05-01 21:52:25 +00:00
Florian Fainelli	292368409e	brcm63xx: add missing binary operands to BCM6345 ethernet patch Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36505	2013-05-01 21:12:40 +00:00
Florian Fainelli	6f48ccea02	brcm63xx: remove 3.7 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36504	2013-05-01 21:12:26 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Jonas Gorski	90986b5581	bcm63xx: update patches with upstream submissions SVN-Revision: 36407	2013-04-23 13:55:36 +00:00
Jonas Gorski	2a1a16d2d5	bcm63xx: switch to linux 3.8 SVN-Revision: 36406	2013-04-23 13:55:17 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
Florian Fainelli	b412a81524	brcm63xx: fix LED names for various boards Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35880	2013-03-04 13:42:35 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Jonas Gorski	ff20c0e1fc	bcm63xx: Fix sysupgrade for tag-version 7 and 8 Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724	2013-02-21 11:45:41 +00:00
Florian Fainelli	d7092aceb8	brcm63xx: migrate platform to common led helper functions Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661	2013-02-18 10:37:55 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Jonas Gorski	485e52e1d8	bcm63xx: make nvram checksum failures non fatal fixes #12982. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35605	2013-02-15 12:23:49 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Jonas Gorski	200359a520	bcm63xx: handle huawei nvram layout Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533	2013-02-10 12:31:31 +00:00
Florian Fainelli	6b0da6db6a	remove support for 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506	2013-02-05 22:36:54 +00:00
Florian Fainelli	e22926a46b	make default version 3.7.6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505	2013-02-05 22:36:50 +00:00
Florian Fainelli	57803a98ec	remove superfluous calls to /lib/brcm63xx.sh The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504	2013-02-05 22:25:30 +00:00
Florian Fainelli	84d306d23c	remove references to the old switch driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503	2013-02-05 22:25:19 +00:00
Mirko Vogt	ec19a23bae	fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W SVN-Revision: 35501	2013-02-05 14:57:43 +00:00
Mirko Vogt	f460388ce2	add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500	2013-02-05 14:57:40 +00:00
Jonas Gorski	8506964e6d	bcm63xx: add support for linux 3.8 Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482	2013-02-04 10:19:55 +00:00
Jonas Gorski	3b4fced67d	bcm63xx: add support for linux 3.7 Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481	2013-02-04 10:19:50 +00:00
Jonas Gorski	a15e1a950d	bcm63xx: refresh 3.6 patches Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477	2013-02-04 10:19:24 +00:00
Jonas Gorski	ce8b226046	bcm63xx: replace kmod-switch with swconfig in default package set Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35407	2013-01-30 00:19:21 +00:00
Jonas Gorski	8411e5c06e	bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307	2013-01-23 10:12:40 +00:00
Jonas Gorski	17d51121a6	bcm63xx: expose the internal switch to b53 Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35306	2013-01-23 10:12:37 +00:00
Jonas Gorski	3e998d9cf9	bcm63xx: move bcm63xx-spi into the kernel The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35304	2013-01-23 10:12:13 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Jonas Gorski	e952eaa112	bcm63xx: Add Huawei HG556a support Add Huawei EchoLife HG556a support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: added some code style fixes] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35011	2013-01-04 14:47:57 +00:00
Jonas Gorski	0e58173fa5	bcm63xx: Fix caldata partition mtd patch Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash. Tested-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 35010	2013-01-04 14:47:50 +00:00
Jonas Gorski	10fc07daac	bcm63xx: remove 3.3 support 3.6 is tested enough to be considered stable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35009	2013-01-04 14:47:43 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Florian Fainelli	d9d0814fc2	Fix Comtrend AR-5381u Power LED Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34471	2012-12-04 15:19:50 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Florian Fainelli	0588d13a3e	Fix typo in 96338GW power LED. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 34396	2012-11-27 18:42:42 +00:00
Jonas Gorski	60e0e0d6e6	bcm63xx: Add a fixup for rt2x00 devices. This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34322	2012-11-24 14:19:22 +00:00
Jonas Gorski	746b4cec06	bcm63xx: Enable LED pin support for ath9k pci fixup. Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34321	2012-11-24 14:19:16 +00:00
Jonas Gorski	1baeede939	bcm63xx: fix spi transfer handling * Accept transfers without bits_per_word set. * Work around the inability of the hardware of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 34320	2012-11-24 14:19:09 +00:00
Jonas Gorski	8dc72c5c4d	Revert "target specific patches have nothing to do in generic.." This reverts commit r34230, as it is causing build failures: make[3] -C package/mtd compile imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory compilation terminated. make[4]: *** [imagetag.o] Error 1 Any patches modifying exported kernel headers need to reside in generic as toolchain/kernel-headers only applies generic patches. SVN-Revision: 34255	2012-11-19 12:38:26 +00:00
Imre Kaloz	b220071cd2	target specific patches have nothing to do in generic.. SVN-Revision: 34230	2012-11-18 09:22:38 +00:00
Gabor Juhos	ff1e854511	kernel: update linux 3.6 to 3.6.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34227	2012-11-18 08:41:31 +00:00
Jonas Gorski	306894b88f	bcm63xx: switch to 3.6.6 SVN-Revision: 34160	2012-11-11 19:57:17 +00:00
Jonas Gorski	c54fa281b1	bcm63xx: fix compilation with kmod-ohci enabled with 3.6 Fixes the following error: drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start': drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration] Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34138	2012-11-10 22:10:47 +00:00
Jonas Gorski	15519bec9c	bcm63xx: add two missing usb patches to 3.6 SVN-Revision: 34137	2012-11-10 19:59:16 +00:00
Jonas Gorski	06ad6ffe16	bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 SVN-Revision: 34136	2012-11-10 19:59:07 +00:00
Jonas Gorski	f2bb7754f5	bcm63xx: Enable endian check support for ath9k pci fixup. Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34105	2012-11-07 09:01:03 +00:00
Jonas Gorski	a50d121d8e	linux: export bcm963xx_tag.h to userspace Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 34103	2012-11-06 15:21:46 +00:00
Jonas Gorski	5bc7d81a20	bcm63xx: fix SPW303V images SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. SVN-Revision: 34091	2012-11-05 22:50:29 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Florian Fainelli	9af90aa80c	add missing 6345 clock bits patch to 3.6 patches SVN-Revision: 33941	2012-10-26 15:24:14 +00:00
Florian Fainelli	8d69af7c9f	add preliminary support for 3.6 kernel SVN-Revision: 33936	2012-10-25 21:16:51 +00:00
Florian Fainelli	dea2da55df	fix Ethernet DMA for 636x and 6328 after r33916 SVN-Revision: 33918	2012-10-25 11:54:41 +00:00
Florian Fainelli	917670922b	add support for the Dynalink RTA770BW board This board id is used by the Siemens Gigaset SE515 router. SVN-Revision: 33917	2012-10-24 21:25:22 +00:00
Florian Fainelli	bdfcbb8bee	make BCM6345 Ethernet DMA changes runtime checks The semantics of the DMA engine are identical, we just have a couple of special case handling. SVN-Revision: 33916	2012-10-24 21:25:10 +00:00
Jonas Gorski	0cc4bed41c	add support for Comtrend AR5381u. Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33895	2012-10-23 10:57:47 +00:00
Jonas Gorski	d73871fb18	add support for Comtrend AR5387un. Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33894	2012-10-23 10:57:44 +00:00
Jonas Gorski	e93725a743	add support for HomeStation ADB P.DG A4001N. Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33893	2012-10-23 10:57:39 +00:00
Florian Fainelli	61686a1514	add back support for BCM6345 Ethernet DMA engine SVN-Revision: 33889	2012-10-22 12:57:22 +00:00
Florian Fainelli	eeed82c04e	fix clocks bits for BCM6345 SVN-Revision: 33888	2012-10-22 12:57:14 +00:00
Jonas Gorski	e6171dfb2c	Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886	2012-10-21 14:35:06 +00:00
Jonas Gorski	fbe0af3237	bcm63xx: remove bcm_tag usage in kernel Fixes #12292. SVN-Revision: 33670	2012-10-09 08:08:49 +00:00
Jonas Gorski	6a000ba37a	bcm63xx: fix 963281TAN image names it's a 6328, not a 6348. SVN-Revision: 33665	2012-10-08 13:08:40 +00:00
Jonas Gorski	997ace7e5e	firmware-utils: move bcm_tag.h here Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. SVN-Revision: 33655	2012-10-08 09:59:50 +00:00
Jonas Gorski	f16ea6be3f	bcm63xx: fix entering failsafe through button gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. SVN-Revision: 33653	2012-10-08 09:59:44 +00:00
Florian Fainelli	caf900f0e4	remove kmod-spi-bitbang This is no longer a dependency of kmod-spi-bcm63xx SVN-Revision: 33562	2012-09-26 20:11:37 +00:00
Jonas Gorski	7708138183	bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi Fixes booting the device with button hotplug enabled (#10785). SVN-Revision: 33340	2012-09-09 11:54:56 +00:00
Florian Fainelli	f164b71189	leds: do not register device if no leds defined Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33158	2012-08-13 09:55:10 +00:00
Florian Fainelli	f0f10014a0	BCM6358 fix enet MII clk definitions Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33157	2012-08-13 09:55:07 +00:00
Florian Fainelli	9b91c62917	nb4: fix support, add support for SVC and CLIP BTN Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> SVN-Revision: 33156	2012-08-13 09:55:04 +00:00
Jonas Gorski	4feeda756e	bcm63xx: fix USB base registers and IRQs for BCM6328 SVN-Revision: 33005	2012-08-05 23:18:22 +00:00
Jonas Gorski	07c4524d33	bcm63xx: Add nb6 support (BCM6362 SoC base boards) Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> [jonas.gorski@gmail.com: add network config for nb6, make switch fix a platform patch] SVN-Revision: 32924	2012-07-31 14:27:47 +00:00
Jonas Gorski	820c224029	bcm63xx: add basic bcm6362 support Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32923	2012-07-31 14:27:42 +00:00
Jonas Gorski	dcd339ac9d	bcm63xx: enable usb for bcm6328 Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32922	2012-07-31 14:27:34 +00:00
Jonas Gorski	94d257a851	bcm63xx: update enetswitch driver Update enetswith driver with latest fixes and additions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32921	2012-07-31 14:27:31 +00:00
Jonas Gorski	fa75bd977a	bcm63xx: reorder patches Fix the order and names of patches. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 32920	2012-07-31 14:27:25 +00:00
Florian Fainelli	a4d699ccf0	fix DVA-G3810BN image generation Attached patch fixes a typo in the image Makefile, and overrides the board name for DVA-G3810BN to set the correct board properties Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> SVN-Revision: 32894	2012-07-27 15:35:12 +00:00
Florian Fainelli	c6813d33f3	add D-link DVA-G3810BN-TL-1 support Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> SVN-Revision: 32893	2012-07-27 15:35:09 +00:00
Florian Fainelli	18206793b2	Add CT6376-1 board support Added CT6373 devices instead of using NB4's devices, as Florian suggested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32892	2012-07-27 15:35:05 +00:00
Florian Fainelli	4acdbb1d87	Add brcmsmac profile Add brcmsmac profile (kmod-brcmsmac + wpad-mini). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32890	2012-07-27 15:34:57 +00:00
Florian Fainelli	b94d9eb302	remove bcm63xx_pci_register() call in livebox board SVN-Revision: 32661	2012-07-11 09:15:26 +00:00
Florian Fainelli	f8446c3d4c	use physmap-flash on livebox (#8677 ) SVN-Revision: 32660	2012-07-11 09:15:22 +00:00
Florian Fainelli	bb1488e5e7	Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32643	2012-07-06 22:10:37 +00:00
Jonas Gorski	0a3e9c3148	bcm63xx: bcm63xx-spi does not depend on spi-bitbang SVN-Revision: 32594	2012-07-03 21:42:17 +00:00
Jonas Gorski	fad888a85c	bcm63xx: 96348A-122 improvements (Comtrend 5365) 1) Improve WLAN button. 2) Add 96348A-122 image. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32593	2012-07-03 21:42:15 +00:00
Jonas Gorski	0c7e676342	bcm63xx: fix second caldata address calculation thanks Noltari for spotting this. SVN-Revision: 32592	2012-07-03 21:42:12 +00:00
Jonas Gorski	988147111c	bcm63xx: update patches to latest upstream versions SVN-Revision: 32591	2012-07-03 21:42:07 +00:00
Florian Fainelli	4cdc4b1f36	refresh patches SVN-Revision: 32581	2012-07-03 09:45:46 +00:00
Florian Fainelli	52bae2d2bd	fix watchdog and rng drivers section mismatch (#11767 ) SVN-Revision: 32522	2012-06-29 09:07:54 +00:00
Florian Fainelli	1d7878a38b	fix SPI clock frequency selection SVN-Revision: 32512	2012-06-27 22:14:50 +00:00
Florian Fainelli	b89c81929e	fix SPI message control handling for BCM6338/6348 BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of 16-bits. We were previously using a 16-bits write which corrupted the first byte of the TX FIFO. Also the message type was always set to Full-duplex even in the case of half-duplex messages. SVN-Revision: 32409	2012-06-17 16:17:29 +00:00
Jonas Gorski	f2271efc4e	bcm63xx: readd accidentially dropped ignore_oc in ehci driver fixes overcurrent warning spam on 3.3 kernels for bcm63xx again. SVN-Revision: 32221	2012-06-11 22:24:58 +00:00
Florian Fainelli	6e5242952c	fix 553-board_96348w3.patch patch wrt gpio-keys-polled SVN-Revision: 32096	2012-06-06 20:58:45 +00:00
Florian Fainelli	4c25e42fa8	fix alarm led color for board 96348A-122 SVN-Revision: 32089	2012-06-06 16:07:46 +00:00
Florian Fainelli	2f63f097de	add 96348w3 board (#10764 ) SVN-Revision: 32088	2012-06-06 15:45:04 +00:00
Florian Fainelli	9d38989d1f	update livebox board support (#8677 ) Merge most fixes from #8677: - add basic hardware detection of Livebox Blue 5g revisions - register leds and gpio buttons - fix boot address location - properly parse mac addresses Plus some more fixes: - make board_livebox.c more in line with board_bcm963xx.c SVN-Revision: 32087	2012-06-06 15:44:56 +00:00
Florian Fainelli	c69a2cdfbb	fix leds naming for all bcm63xx boards SVN-Revision: 32086	2012-06-06 15:44:52 +00:00
Florian Fainelli	23fc737b9d	backport upstream spi-bcm63xx fixes * message pump conversion * not using stopping state * setting spi driver mode bits SVN-Revision: 32078	2012-06-06 13:31:33 +00:00
Florian Fainelli	4112094dbb	increase led number in patch 301-led_count.patch So that board patches are only touching board-related code SVN-Revision: 32076	2012-06-06 13:31:24 +00:00
Florian Fainelli	9a61b249c5	fix board patches so that new boards are withing appropriate ifdef Some new board definitions were added within the #ifdef CONFIG_CPU_6338 section while some other were added within #ifdef CONFIG_CPU_6345, fix this SVN-Revision: 32060	2012-06-05 13:40:41 +00:00
Florian Fainelli	36c99bcc42	fix bisectability of patch 303-spi-board-info.patch It uses spi_register_board_info() from linux/spi/spi.h but does not include it explicitely. SVN-Revision: 32058	2012-06-05 13:40:35 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Jonas Gorski	ffea8eb913	bcm63xx: fix ethernet on 96328avng and 963281TAN The internal switch did not get registered. SVN-Revision: 32041	2012-06-04 08:35:25 +00:00
Jonas Gorski	3fc76fb781	bcm63xx: build images for 6328 reference boards with various flash sizes Build images for 96328avng and 963281TAN (untested) for three different flash sizes: 4MB, 8MB, and 16MB. Known issues: * Button setup unknown, thus no fail-safe available. * All other BCM6328 and BCM63XX issues SVN-Revision: 32004	2012-05-30 10:27:46 +00:00
Jonas Gorski	c454ba3657	bcm63xx: readd accidentially dropped network config for SPW303V SVN-Revision: 32003	2012-05-30 10:27:42 +00:00
Jonas Gorski	ec7786c2ec	bcm63xx: build images for DSL-274XB revision F1 Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support SVN-Revision: 31885	2012-05-27 13:22:51 +00:00
Jonas Gorski	8aac009cc9	bcm63xx: add ath9k to atheros wifi profile SVN-Revision: 31884	2012-05-27 13:22:48 +00:00
Jonas Gorski	4aa43122ab	bcm63xx: enable bcm6328 support and required drivers BCM6328 support is in a usable state, with the following issues * internal switch port not configurable * external phys not supported * broadcom wifis will probably not work correctly * and all other generic bcm63xx issues (so yes, still no ADSL) SVN-Revision: 31883	2012-05-27 13:22:46 +00:00
Jonas Gorski	e5575fe335	bcm63xx: add support for DSL-274XB rev F1 SVN-Revision: 31882	2012-05-27 13:22:43 +00:00
Jonas Gorski	a7a82db16f	bcm63xx: fix port state after network down bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881	2012-05-27 13:22:40 +00:00
Jonas Gorski	e19ed52fd1	bcm63xx: add a fixup for ath9k devices SVN-Revision: 31880	2012-05-27 13:22:37 +00:00
Jonas Gorski	e34018cc9e	bcm63xx: add support for the HSSPI controller Add support for the HSSPI controller found on bcm6328 and SPI attached flash. SVN-Revision: 31879	2012-05-27 13:22:33 +00:00
Jonas Gorski	099d5eec06	bcm63xx: add preliminary support for bcm6328 SVN-Revision: 31878	2012-05-27 13:22:29 +00:00
Jonas Gorski	7dbb132c88	bcm63xx: add flash type detection SVN-Revision: 31877	2012-05-27 13:22:25 +00:00
Jonas Gorski	b0ffeb0021	bcm63xx: pad Speedport W303 V images to 4 MiB Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. SVN-Revision: 31876	2012-05-27 13:22:22 +00:00
Jonas Gorski	226b030e44	bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874	2012-05-27 13:22:17 +00:00
Jonas Gorski	db1ff5c6fa	bcm63xx: setup network config through uci-defaults SVN-Revision: 31873	2012-05-27 13:22:14 +00:00
Jonas Gorski	72b4fdecc9	bcm63xx: move the board name workaround to /lib/brcm63xx.sh SVN-Revision: 31872	2012-05-27 13:22:11 +00:00
Jonas Gorski	dd37687de0	bcm63xx: use the exact board id as board identification string No need to keep the bcm63xx/ at the start or the chipid info at the end. SVN-Revision: 31871	2012-05-27 13:22:08 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Jonas Gorski	b218b15709	bcm63xx: fix a race between PCI bus scan and fallback sprom registration The fallback sprom handler was installed too late, resulting in ssb failing to get a valid sprom on some devices. Fixes #11384. SVN-Revision: 31638	2012-05-06 21:25:34 +00:00
Florian Fainelli	5d9b44d110	use a define for the poll and debounce interval SVN-Revision: 31550	2012-05-02 15:40:26 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Florian Fainelli	e047cf1899	switch to gpio-keys-polled SVN-Revision: 31491	2012-04-27 16:44:48 +00:00
Jonas Gorski	8a38c62c07	bcm63xx: drop linux 3.2 support SVN-Revision: 31464	2012-04-24 11:49:27 +00:00
Jonas Gorski	77219290e1	bcm63xx: drop linux 3.0 support SVN-Revision: 31463	2012-04-24 11:49:24 +00:00
Jonas Gorski	49de6c1714	bcm63xx: switch kernel to 3.3 SVN-Revision: 31462	2012-04-24 11:49:19 +00:00
Jonas Gorski	f7df1eafc4	bcm63xx: enable bcm6368 for linux 3.3 and build images Only build bcm6368 images when building for linux 3.3. SVN-Revision: 31133	2012-03-28 20:42:37 +00:00
Jonas Gorski	c7ae2fccb6	bcm63xx: add initial support for bcm6368 boards SVN-Revision: 31132	2012-03-28 20:42:34 +00:00
Jonas Gorski	68f268a5eb	bcm63xx: add driver for the internal hw trng on bcm6368 SVN-Revision: 31131	2012-03-28 20:42:30 +00:00
Jonas Gorski	78fb818f7c	bcm63xx: replace SPI driver with latest upstream version SVN-Revision: 31130	2012-03-28 20:42:25 +00:00
Jonas Gorski	a2adca6ee9	bcm63xx: add ethernet support for bcm6368 Add basic support for the internal ethernet switch on bcm6368. It behaves as a dumb switch for now, but allows basic connectivity. Also drop the ethernet patch for bcm6345 for now, it needs rework. SVN-Revision: 31129	2012-03-28 20:42:20 +00:00
Jonas Gorski	0876972850	bcm63xx: add missing bits from extirq support Add missing external IRQ code parts for older chips in the new code. SVN-Revision: 31128	2012-03-28 20:42:15 +00:00
Jonas Gorski	44d546290a	bcm63xx: reorder patches Reorder patches for a clearer distinction between the purposes of the different patches. SVN-Revision: 31127	2012-03-28 20:42:09 +00:00
Felix Fietkau	db6e326c56	targets: replace madwifi in profiles with ath5k, madwifi is unmaintained SVN-Revision: 31015	2012-03-19 09:58:13 +00:00
Florian Fainelli	07486c4d96	remove udc patch since it is unused SVN-Revision: 30920	2012-03-13 14:06:44 +00:00
Florian Fainelli	1029786936	remove 3.1 support SVN-Revision: 30823	2012-03-05 16:50:42 +00:00
Florian Fainelli	75b5f4a6b4	rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic SVN-Revision: 30822	2012-03-05 14:49:34 +00:00
Florian Fainelli	c327915156	generate generic images for BCM96358VW and BCM96358VW2 (#10666 ) SVN-Revision: 30821	2012-03-05 14:49:31 +00:00
Florian Fainelli	ca1e59660e	wire bcm96348gw-10 reset button (#10854 ) SVN-Revision: 30820	2012-03-05 14:23:45 +00:00
Florian Fainelli	631a035a76	Merge branch 'bcm63xx' SVN-Revision: 30819	2012-03-05 13:29:54 +00:00
Jonas Gorski	778e5d4fa5	brcm63xx: add support for linux 3.3 SVN-Revision: 30027	2012-02-04 10:17:27 +00:00
Jonas Gorski	e67f4477bb	kernel: update linux 3.0 to 3.0.18 SVN-Revision: 29965	2012-01-31 09:43:53 +00:00
Florian Fainelli	882eddbf92	build 96348R images SVN-Revision: 29960	2012-01-30 21:12:32 +00:00
Florian Fainelli	0700644b16	remove support for 2.6.39 SVN-Revision: 29959	2012-01-30 21:12:28 +00:00
Florian Fainelli	038fc8eac3	bump to 3.0.17 SVN-Revision: 29958	2012-01-30 21:12:25 +00:00
Jonas Gorski	3883e71097	brcm63xx: add support for linux 3.2 SVN-Revision: 29731	2012-01-13 14:59:50 +00:00
Jonas Gorski	c560444a58	kernel: update linux 3.1 to 3.1.9 SVN-Revision: 29726	2012-01-13 14:38:28 +00:00
Jonas Gorski	e49d3e1d5b	kernel: update linux 3.0 to 3.0.17 SVN-Revision: 29725	2012-01-13 14:10:44 +00:00
Daniel Dickinson	034b7f0ef5	Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. SVN-Revision: 29712	2012-01-11 13:47:48 +00:00
Florian Fainelli	718907b661	don't package gpioctl by default SVN-Revision: 29288	2011-11-21 16:36:39 +00:00
Jo-Philipp Wich	b5739aabd9	fix D-Link DSL-2650U image generation SVN-Revision: 29266	2011-11-19 21:34:51 +00:00
Jonas Gorski	8bac0df4ae	linux: update 3.0 to 3.0.9 SVN-Revision: 29264	2011-11-19 18:39:12 +00:00
Florian Fainelli	ae90aa4efd	build images for D-Link DSL-2650U (#9003 ) SVN-Revision: 29238	2011-11-18 10:37:03 +00:00
Florian Fainelli	7f787707de	build images for Pirelli A226M (#10409 ) SVN-Revision: 29045	2011-11-13 19:19:22 +00:00
Florian Fainelli	5dc2098448	register uart0 on DWV-S0 boards (#10409 ) SVN-Revision: 29044	2011-11-13 19:19:18 +00:00
Florian Fainelli	717a4391d7	rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch SVN-Revision: 29041	2011-11-13 19:19:05 +00:00
Jonas Gorski	d8acb75009	linux: update 3.1 to 3.1.1 SVN-Revision: 29007	2011-11-13 10:48:05 +00:00
Jo-Philipp Wich	a9e64493d8	target: globally disable BSD process accounting SVN-Revision: 28584	2011-10-25 16:18:36 +00:00
Hauke Mehrtens	09b1073f9b	kernel: update kernel to version 2.6.39.4 SVN-Revision: 28022	2011-08-16 22:04:10 +00:00
Florian Fainelli	b59ab7d13b	fix ehci build on 3.0+ SVN-Revision: 27946	2011-08-10 11:37:25 +00:00
Florian Fainelli	0e40c19b45	add ignore_oc in struct ehci_hcd SVN-Revision: 27945	2011-08-10 11:37:21 +00:00
Jonas Gorski	6b5f483efa	bcm63xx: add support for linux 3.1-rc1 SVN-Revision: 27941	2011-08-09 12:19:49 +00:00
Florian Fainelli	c37a9544bf	add support for BCM6345 Ethernet DMA engine SVN-Revision: 27881	2011-08-02 18:55:55 +00:00
Florian Fainelli	11c4128770	improve BCM6345 support - runtime detect the amount of memory available - define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks - fix GPIO control SVN-Revision: 27880	2011-08-02 18:55:46 +00:00
Jonas Gorski	4e6c93bef1	bcm63xx: Fix SPI commands and register offsets for BCM6348 In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that. It also fixes some spi commands for all bcm63xx. Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk> SVN-Revision: 27774	2011-07-25 19:52:47 +00:00
Florian Fainelli	9c7294f7c7	add ehci support to DWV-S0 board (#9059 ) SVN-Revision: 27622	2011-07-16 08:39:04 +00:00
Florian Fainelli	930485561c	fix GEN_SPI_RSET_BASE macro (#9697 ) SVN-Revision: 27604	2011-07-13 09:33:11 +00:00
Florian Fainelli	00ad56b73e	move board_HW553 inside the ifdef ..BCM6358 .. endif block SVN-Revision: 27484	2011-07-06 10:00:39 +00:00
Daniel Dickinson	1141165bb9	Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. SVN-Revision: 27471	2011-07-06 06:35:24 +00:00
Daniel Dickinson	9dc72505a2	profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc SVN-Revision: 27470	2011-07-06 06:35:22 +00:00
Florian Fainelli	7c3bbe150a	hw553: fix missing has_uart0 in board definition (#9533 ) SVN-Revision: 27448	2011-07-04 15:04:58 +00:00
Hauke Mehrtens	c5821c1a3a	kernel: update kernel to 2.6.39.2 SVN-Revision: 27298	2011-06-28 19:30:58 +00:00
Hauke Mehrtens	ca979845cc	kernel: update ssb and bcma to linux-next next-20110627 SVN-Revision: 27295	2011-06-27 21:28:40 +00:00
Florian Fainelli	3f40c0f7df	remove gpiodev, prefer sysfs gpio SVN-Revision: 27284	2011-06-25 19:26:17 +00:00
Florian Fainelli	f6e4eb15bc	register SSB sprom after ethernet devices In case the MAC address pool is not big enough to also register a SSB SPROM prefer registering the Ethernet devices. SVN-Revision: 27258	2011-06-22 12:32:03 +00:00
Florian Fainelli	5a76c6bdd7	fix tab damage in 141-led_count.patch SVN-Revision: 27254	2011-06-21 20:52:58 +00:00
Florian Fainelli	3f0f8d9c87	fix and make usable kmod-pcmcia-rsrc This module is also needed for e.g: kmod-bcm63xx-pcmcia SVN-Revision: 27253	2011-06-21 20:52:53 +00:00
Florian Fainelli	9bdf6abb9d	use macros to generate SPI registers table and switches SVN-Revision: 27246	2011-06-21 10:05:51 +00:00
Florian Fainelli	ab74628c10	dev-spi.c checks for running CPU, not board code SVN-Revision: 27236	2011-06-19 20:46:00 +00:00
Florian Fainelli	4dd4cbeb43	fixup patches after r27234 SVN-Revision: 27235	2011-06-19 20:28:38 +00:00
Florian Fainelli	7819b530da	remove accidental bcm6345 related patches SVN-Revision: 27234	2011-06-19 20:16:59 +00:00
Florian Fainelli	12db3df666	remove support for 2.6.37 and 2.6.38 SVN-Revision: 27233	2011-06-19 20:14:22 +00:00
Florian Fainelli	6bb0a608dc	switch to 2.6.39 SVN-Revision: 27232	2011-06-19 20:12:45 +00:00
Florian Fainelli	426dccd019	bcm63xx: Add support for Linux 3.0-rc3 Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27192	2011-06-16 14:34:40 +00:00
Florian Fainelli	016e8dee34	bcm63xx: Add support for 2.6.39 Add support for Kernel 2.6.39. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27019	2011-05-27 09:54:52 +00:00
Florian Fainelli	590c82cec1	bcm63xx: Add support for 2.6.38 Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 27018	2011-05-27 09:54:48 +00:00
Florian Fainelli	68cb138154	fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch SVN-Revision: 27014	2011-05-26 13:53:00 +00:00
Florian Fainelli	762885081a	renumber patches accordingly SVN-Revision: 27013	2011-05-26 13:52:56 +00:00
Florian Fainelli	2785e3fc12	renumber board patches SVN-Revision: 27012	2011-05-26 12:09:15 +00:00
Florian Fainelli	16dfe8b4d1	add support for BT Voyager 2110 (#8810 ) Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 26959	2011-05-20 10:06:25 +00:00
Florian Fainelli	6c8387fe15	add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958	2011-05-20 10:06:22 +00:00
Florian Fainelli	031ea08ef0	refresh patches SVN-Revision: 26957	2011-05-20 10:06:18 +00:00
Florian Fainelli	3e83f60a66	add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956	2011-05-20 10:06:15 +00:00
Florian Fainelli	f0a99c1692	add support for BT Voyager 2500 (#9070 ) SVN-Revision: 26954	2011-05-20 10:06:07 +00:00
Florian Fainelli	acf0ec224f	add support for USR9108 LEDs (#9372 ) SVN-Revision: 26953	2011-05-20 10:06:04 +00:00
Florian Fainelli	9c8a2d5961	bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878	2011-05-11 13:34:14 +00:00
Florian Fainelli	7d3b735854	bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876	2011-05-11 13:33:50 +00:00
Florian Fainelli	0fb1c2d537	bcm63xx: Accept any led with power in its name as power led Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26875	2011-05-11 13:33:45 +00:00
Florian Fainelli	c6af9c23b7	bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26874	2011-05-11 13:33:41 +00:00
Florian Fainelli	de02a2795b	fill maintainer infos for a couple of targets SVN-Revision: 26836	2011-05-06 12:37:36 +00:00
Hauke Mehrtens	fcb1557a3e	brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. SVN-Revision: 26829	2011-05-05 14:05:21 +00:00
Hauke Mehrtens	3dbb8c5088	brcm47xx: add fallback sprom for pci devices without an own sprom. If there is no sprom on an ssb based pci device on the brcm47xx architecture ssb now asks the architecture code to look into the nvram to get some sprom data for this device. Now we are able to read out pci/1/1/ foo or pci/1/3/ foo config options. This will fix some problems where the wireless devices does not got an mac address and the following message was show: ssb: WARNING: Invalid SPROM CRC (corrupt SPROM) SVN-Revision: 26801	2011-05-01 20:28:35 +00:00
Felix Fietkau	1fcd26091b	brcm63xx: remove patches/configs for 2.6.35 SVN-Revision: 26709	2011-04-17 18:39:46 +00:00
Daniel Dickinson	8b18ce6807	Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. SVN-Revision: 26699	2011-04-17 01:15:47 +00:00
Daniel Dickinson	0d722113b9	Generate images for RTA1320_16M-based routers SVN-Revision: 26681	2011-04-15 14:31:36 +00:00
Daniel Dickinson	f83c5938d2	bcm63xx: Move the OpenWrt rootfs length field Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26680	2011-04-15 12:18:25 +00:00
Hauke Mehrtens	50c743e79e	kernel: Update to version 2.6.37.6 Thank you Peter Wagner for the patch SVN-Revision: 26441	2011-04-03 13:59:07 +00:00
Daniel Dickinson	33b864e899	Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices. SVN-Revision: 26387	2011-03-31 06:16:23 +00:00
Florian Fainelli	aa580d336b	bcm63xx: Really fix the flash driver in 2.6.37 Read back the actual rootfs length from the image tag. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25938	2011-03-07 16:55:01 +00:00
Florian Fainelli	9dd1454044	fix patches after 2.6.37 update, patch from KanjiMonster SVN-Revision: 25810	2011-03-01 16:02:38 +00:00
Florian Fainelli	94a22b91fc	add support for 2.6.37, patches from KanjiMonster SVN-Revision: 25629	2011-02-20 19:59:22 +00:00
Florian Fainelli	8cc16aa14e	add support for HW553 bcm6358-based boards (#8844 ) SVN-Revision: 25590	2011-02-19 15:44:06 +00:00
Florian Fainelli	b7f8e1276d	add support for 'MAGIC' bcm6348-based board I wrote a patch to add 96348SV board (aka MAGIC) support to trunk. In my case I've found it in a Telsey "Alice W-Gate" router, fairly common (in the past) in Italy. I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2 relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c ) Thanks to KanjiMonster for the support on the IRC channel. Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com> SVN-Revision: 25584	2011-02-19 12:44:27 +00:00
Florian Fainelli	31709b2c76	update to 2.6.35.11 SVN-Revision: 25582	2011-02-19 12:44:16 +00:00
Florian Fainelli	2d3ed6dc2d	fix T-Com Speedport W 500V default config The device is called SPW500V, not SP500W. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25431	2011-02-09 13:09:02 +00:00
Florian Fainelli	e75274de89	fix build of brcm-wl The fallback needs to be exported for bcm63xx, too. Runtime tested with a BCM4322 on a BCM6358. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25420	2011-02-08 13:46:12 +00:00
Florian Fainelli	bed53c93d6	give some credits to Tanguy Bouzeloc in the spi driver SVN-Revision: 25133	2011-01-27 02:11:08 +00:00
Florian Fainelli	c6d9ec5173	multiple SPI driver fixes - fix platform device registration - fix chipselect, command register defines, add missing clock - make slave select proper - fix multibytes transferts Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> SVN-Revision: 24849	2010-12-29 16:19:59 +00:00
Daniel Dickinson	dc9c1ac1f7	patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). SVN-Revision: 24843	2010-12-28 08:10:32 +00:00
Daniel Dickinson	5ee2a6c696	patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. SVN-Revision: 24842	2010-12-28 04:05:04 +00:00
Florian Fainelli	093ebfe217	spi driver: remove bcm_rset usage Since bcm636x platform embeds two spi master device, the attached patch removes static bcm_rset usage, replaced by "bs->regs" field for all I/O operation. Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 24840	2010-12-28 00:24:50 +00:00
Daniel Dickinson	fc3a1d0ba3	Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24838	2010-12-26 04:18:13 +00:00
Daniel Dickinson	6ee5411686	base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24836	2010-12-26 04:18:04 +00:00
Daniel Dickinson	31f7259e3e	mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> SVN-Revision: 24834	2010-12-26 04:17:56 +00:00
Daniel Dickinson	44e22cbd49	Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. SVN-Revision: 24442	2010-12-10 18:59:58 +00:00
Daniel Dickinson	7224337d71	Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. SVN-Revision: 24316	2010-12-08 00:40:31 +00:00
Daniel Dickinson	2a86dcc3d6	Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. SVN-Revision: 24315	2010-12-08 00:40:28 +00:00
Daniel Dickinson	c6ef9a0720	Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile SVN-Revision: 24314	2010-12-08 00:40:24 +00:00
Daniel Dickinson	f8ed133c0a	patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. SVN-Revision: 24310	2010-12-07 17:32:29 +00:00
Daniel Dickinson	0e839ea40d	Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5. It belongs in generic not brcm63xx. SVN-Revision: 24308	2010-12-07 17:02:31 +00:00
Daniel Dickinson	183d628485	patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise SVN-Revision: 24307	2010-12-07 16:42:23 +00:00
Daniel Dickinson	8f9b14dafe	boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. SVN-Revision: 24305	2010-12-07 15:15:54 +00:00
Daniel Dickinson	3baa168e09	patches: Refreshed patches after led_count SVN-Revision: 24304	2010-12-07 15:15:51 +00:00
Daniel Dickinson	b963cbde33	board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit SVN-Revision: 24303	2010-12-07 15:15:47 +00:00
Daniel Dickinson	e5ca4d81f4	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. SVN-Revision: 24302	2010-12-07 15:15:41 +00:00
Daniel Dickinson	ad24e14b35	base-files: Added the preinit information for reset button and preinit indication led, and preinit interface SVN-Revision: 24276	2010-12-06 06:46:03 +00:00
Daniel Dickinson	244db5ac6a	board definition: Fixed CPVA642 LED definitions SVN-Revision: 24275	2010-12-06 06:45:57 +00:00
Daniel Dickinson	8316194016	board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz SVN-Revision: 24274	2010-12-06 04:31:23 +00:00
Daniel Dickinson	7129521696	base-files: Added network defconfig because board only has one ethernet (4-port switch) SVN-Revision: 24273	2010-12-06 02:01:08 +00:00
Daniel Dickinson	9677b65cb6	image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. SVN-Revision: 24191	2010-11-28 22:13:00 +00:00
Daniel Dickinson	314bce63e6	bcm63xx: Add support for the T-Com Speedport W 500V. Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24190	2010-11-28 22:04:44 +00:00
Daniel Dickinson	3a49f669f2	bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24189	2010-11-28 22:04:40 +00:00
Daniel Dickinson	c51d772e62	bcm63xx: Finalize support for DSL-274xB, rev C2. The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24188	2010-11-28 22:04:36 +00:00
Daniel Dickinson	8fa9b24a4c	bcm63xx: Allow 'colored' power leds. Since some devices have more than one power led, they might be separated by their color in the name. To also allow them to be on after leaving preinit, set any status led starting with 'power' to on instead of only those with the exact name of 'power'. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24187	2010-11-28 22:04:30 +00:00
Daniel Dickinson	fec30c8c80	bcm63xx: Don't hardcode the switch ethernet interface in preinit. Currently eth1 is hardcoded as the expected interface switches in diagmode. This patch replaces the eth1 with the ifname, and also directly tests if the interface specified by ifname has a switch attached. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24186	2010-11-28 22:04:26 +00:00
Daniel Dickinson	b1b318750a	bcm63xx: Add defconfigs. Port the mechanism for different default configurations from ar71xx and use the old configuration as the default configuration. This should have no functional differences to before. While we are at it, remove the obsolete nat option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 24185	2010-11-28 22:04:19 +00:00
Imre Kaloz	ead8ab8403	update to the latest stable kernels SVN-Revision: 24136	2010-11-24 18:50:11 +00:00
Daniel Dickinson	195d1d7446	image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section SVN-Revision: 24127	2010-11-24 11:06:13 +00:00
Daniel Dickinson	0c0c1f017f	image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. SVN-Revision: 24118	2010-11-23 20:17:08 +00:00
Daniel Dickinson	049e59a27b	Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). SVN-Revision: 24040	2010-11-19 13:41:54 +00:00
Daniel Dickinson	eadb5c84fa	imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). SVN-Revision: 24011	2010-11-16 06:46:53 +00:00
Claudio Mignanti	7583fe8668	Add wps button on alice gate SVN-Revision: 23903	2010-11-06 21:08:44 +00:00
Imre Kaloz	0a5da348d1	update kernels to 2.6.32.25 and 2.6.35.8 SVN-Revision: 23851	2010-11-04 09:01:08 +00:00
Florian Fainelli	ffc84cf75c	register uart driver on livebox (#8013 ) SVN-Revision: 23653	2010-10-27 10:02:13 +00:00
Florian Fainelli	7bf5647070	refresh 2.6.35 patches SVN-Revision: 23652	2010-10-27 10:02:08 +00:00
Claudio Mignanti	697d3e7066	Fix nxp_74hc164 driver compile error (builbot) SVN-Revision: 23623	2010-10-24 16:10:41 +00:00
Florian Fainelli	20d28f7685	fix platform_devices registration Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com> SVN-Revision: 23517	2010-10-18 19:49:54 +00:00
Florian Fainelli	af0e5167bc	add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 ) SVN-Revision: 23508	2010-10-17 17:45:50 +00:00
Florian Fainelli	9d9e3fed62	remove 2.6.32 support SVN-Revision: 23505	2010-10-17 16:32:35 +00:00
Florian Fainelli	a1ea84dbb6	fix SPI driver, move register out of driver code Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com SVN-Revision: 23504	2010-10-17 14:09:30 +00:00
Florian Fainelli	1a13c39f76	restore kernel oldconfig Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23503	2010-10-17 14:09:24 +00:00
Florian Fainelli	265bf2ccb0	refresh patches Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23502	2010-10-17 14:09:04 +00:00
Florian Fainelli	9f4c51acb7	refresh nb4 support. Register 74x164 device Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23501	2010-10-17 14:08:57 +00:00
Florian Fainelli	8cbd9d5a2e	add spi devices board info int bcm63xx_boards Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23500	2010-10-17 14:08:51 +00:00
Florian Fainelli	b65e494976	add 74x164 SPI chip support Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23499	2010-10-17 14:08:45 +00:00
Florian Fainelli	cd9b90235c	backport SPI master with no RXTX support (from 2.6.36) Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23498	2010-10-17 14:08:39 +00:00
Florian Fainelli	d5854cfd4d	register earlier extended platform devices Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> SVN-Revision: 23497	2010-10-17 14:08:34 +00:00
Lars-Peter Clausen	83d6a36019	update 2.6.35.x to 2.6.35.7 SVN-Revision: 23213	2010-10-04 07:42:32 +00:00
Florian Fainelli	bbca651e1b	remove wpa-supplicant and iw from the Tecom GW6x00 profile SVN-Revision: 23051	2010-09-13 08:30:35 +00:00
Florian Fainelli	d3e206ad96	default to using 2.6.35 SVN-Revision: 23038	2010-09-12 21:23:53 +00:00
Florian Fainelli	dc1302fdf9	remove 2.6.33 support SVN-Revision: 23037	2010-09-12 21:23:47 +00:00
Florian Fainelli	327ac42dca	change the Tecom GW6x00 profile to use wl instead of b43 SVN-Revision: 23036	2010-09-12 21:23:41 +00:00
Florian Fainelli	f4f789f211	register udc and spi devices at the correct init level SVN-Revision: 23035	2010-09-12 21:23:35 +00:00
Florian Fainelli	fab2e77357	refresh 2.6.35 patches SVN-Revision: 23034	2010-09-12 21:23:29 +00:00
Jo-Philipp Wich	867ac59ff9	enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx SVN-Revision: 22846	2010-08-30 22:59:20 +00:00
Florian Fainelli	2e343d9760	add 2.6.35 support SVN-Revision: 22800	2010-08-25 19:56:08 +00:00
Florian Fainelli	b1becffa5b	update to 2.6.32.20 SVN-Revision: 22766	2010-08-22 17:07:37 +00:00
Daniel Dickinson	a5fdf57a1b	base-files: diag.sh: For power button as preinit status led, end with led left on, not off SVN-Revision: 22466	2010-08-02 19:33:08 +00:00
Daniel Dickinson	d391ca2c8c	base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit SVN-Revision: 22465	2010-08-02 19:32:59 +00:00
Daniel Dickinson	99d0f9ea05	patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 SVN-Revision: 22464	2010-08-02 19:32:40 +00:00
Jo-Philipp Wich	00cc52f14b	reorder profiles SVN-Revision: 22390	2010-07-26 18:58:35 +00:00
Jo-Philipp Wich	7831006360	fix a typo in 040-bcm963xx_flashmap.patch SVN-Revision: 22386	2010-07-25 00:10:37 +00:00
Imre Kaloz	ca8f45b142	update kernel versions SVN-Revision: 22289	2010-07-19 11:34:03 +00:00
Florian Fainelli	f6935a4bdb	fix alice gate2 internet:green led (#6743 ) SVN-Revision: 22273	2010-07-18 10:29:44 +00:00
Jo-Philipp Wich	abdf25b045	add required exports for wl.ko SVN-Revision: 22174	2010-07-13 17:03:56 +00:00
Claudio Mignanti	2d86ea7bf3	massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 SVN-Revision: 22145	2010-07-12 14:06:13 +00:00
Jo-Philipp Wich	1650f33f97	add a wifi profile for proprietary wl SVN-Revision: 22009	2010-07-01 01:39:04 +00:00
Florian Fainelli	fb94196462	add missing alice gate2 leds (#6743 ) SVN-Revision: 21785	2010-06-13 12:20:53 +00:00
Florian Fainelli	145fd381d7	do not override cfg80211-related config symbols SVN-Revision: 21769	2010-06-12 18:10:16 +00:00
Gabor Juhos	9bc1e548a1	generic: move more common options to generic configuration * CONFIG_ABX500_CORE * CONFIG_ATOMIC64_SELFTEST * CONFIG_BRIDGE_IGMP_SNOOPING * CONFIG_CAIF * CONFIG_CEPH_FS * CONFIG_CRYSTALHD * CONFIG_DEFAULT_SECURITY_SELINUX * CONFIG_DEFAULT_SECURITY_SMACK * CONFIG_DEFAULT_SECURITY_TOMOYO * CONFIG_DT3155 * CONFIG_IP_MROUTE_MULTIPLE_TABLES * CONFIG_L2TP * CONFIG_LOGFS * CONFIG_LPC_SCH * CONFIG_MFD_JANZ_CMODIO * CONFIG_MFD_RDC321X * CONFIG_N_GSM * CONFIG_RAMOOPS * CONFIG_SERIAL_ALTERA_JTAGUART * CONFIG_SERIAL_ALTERA_UART * CONFIG_SERIAL_TIMBERDALE * CONFIG_SM_FTL * CONFIG_SQUASHFS_XATTRS SVN-Revision: 21750	2010-06-10 10:45:51 +00:00
Gabor Juhos	2f328ce488	generic: move some common symbols to generic configuration * CONFIG_MUTEX_SPIN_ON_OWNER * CONFIG_DEFAULT_HYDLA * CONFIG_DEFAULT_VENO SVN-Revision: 21748	2010-06-10 08:58:14 +00:00
Gabor Juhos	5cad9d5c73	generic: standardize CONFIG_INLINE_* symbols usage SVN-Revision: 21746	2010-06-10 08:09:41 +00:00
Daniel Dickinson	f296eeab53	brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design) SVN-Revision: 21631	2010-05-30 02:04:56 +00:00
Daniel Dickinson	6a267cfa76	brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods SVN-Revision: 21630	2010-05-30 01:44:37 +00:00
Daniel Dickinson	40c53c6556	brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) SVN-Revision: 21629	2010-05-30 01:33:20 +00:00
Daniel Dickinson	82edb6eafa	brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) SVN-Revision: 21628	2010-05-30 01:33:09 +00:00
Daniel Dickinson	cc8fba8441	brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) SVN-Revision: 21627	2010-05-30 01:32:58 +00:00
Daniel Dickinson	bd8cfa63f4	brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) SVN-Revision: 21626	2010-05-30 01:32:47 +00:00
Nicolas Thill	e74e289fa8	update linux kernel to 2.6.32.14 SVN-Revision: 21583	2010-05-27 18:09:09 +00:00
Nicolas Thill	46e2eea1ef	target/linux: refresh 2.6.32 patches SVN-Revision: 21566	2010-05-24 20:35:46 +00:00
Hauke Mehrtens	b18a1d217b	kernel: update kernel to version 2.6.32.13 and 2.6.33.4 SVN-Revision: 21540	2010-05-23 13:16:51 +00:00
Florian Fainelli	f89ff525ee	revert r21085, fixes #7282 SVN-Revision: 21352	2010-05-04 08:07:39 +00:00
Florian Fainelli	1017215649	do not write to per-port over-current register, which is bogus (#6898 ) SVN-Revision: 21306	2010-05-02 19:14:10 +00:00
Raphaël Huck	f87eac79bb	rename reset_buttons to buttons SVN-Revision: 21255	2010-04-29 12:54:24 +00:00
Raphaël Huck	ccfe1f7886	add WPS button support for nb4 boards SVN-Revision: 21254	2010-04-29 12:51:41 +00:00
Raphaël Huck	b29ef93886	fix gpio button key code, match button-hotplug code SVN-Revision: 21253	2010-04-29 12:51:02 +00:00
Raphaël Huck	5af6e7724b	fix gpio_button device register SVN-Revision: 21252	2010-04-29 12:50:09 +00:00
Raphaël Huck	73e450f44a	fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel SVN-Revision: 21231	2010-04-28 12:30:32 +00:00
Raphaël Huck	1a07f81239	extend bcm63xx_wdt driver for debugging purposes, thx Miguel SVN-Revision: 21199	2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis	fdac9ae836	sync to kernel 2.6.32.12 SVN-Revision: 21195	2010-04-27 14:30:08 +00:00
Raphaël Huck	8df378a918	add neufbox 4 board support, thx Miguel & Florian SVN-Revision: 21193	2010-04-27 13:49:31 +00:00
Raphaël Huck	266c0bf900	add NXP 74HC164 chip driver support, thx Miguel & Florian SVN-Revision: 21192	2010-04-27 13:48:26 +00:00
Raphaël Huck	cf1654354b	add extended platform devices patch, thx Miguel & Florian SVN-Revision: 21191	2010-04-27 13:46:22 +00:00
Florian Fainelli	d15e136deb	fix spi chip select configuration SVN-Revision: 21164	2010-04-26 13:33:48 +00:00
Florian Fainelli	84dd37d930	fix bcm6358 spi base register address (#7234 ) SVN-Revision: 21163	2010-04-26 09:22:27 +00:00
Florian Fainelli	52231f694d	the SPI_CMD register is 16-bits wide SVN-Revision: 21162	2010-04-26 09:22:23 +00:00
Nicolas Thill	b1b2b04639	package/kernel: move PCMCIA modules to their own file & submenu SVN-Revision: 21136	2010-04-24 13:53:31 +00:00
Nicolas Thill	484051d055	package/kernel: move target specific modules to their own target files SVN-Revision: 21132	2010-04-24 13:34:51 +00:00
Florian Fainelli	2bab1a43be	register spi controller, remove whitespaces SVN-Revision: 21096	2010-04-22 16:35:49 +00:00
Florian Fainelli	6b423d5ecb	resync 2.6.33 mtd patch with the one for 2.6.32 SVN-Revision: 21095	2010-04-22 16:35:44 +00:00
Florian Fainelli	41836b16bb	fix wrong refresh on flashmap patch SVN-Revision: 21094	2010-04-22 16:35:01 +00:00
Florian Fainelli	ca3e07d639	re-instate SPI support SVN-Revision: 21087	2010-04-22 15:27:51 +00:00
Florian Fainelli	0b47141194	refresh 2.6.32 patches SVN-Revision: 21086	2010-04-22 15:27:46 +00:00
Florian Fainelli	be2a5389e6	alwasy read imagetag with 64K erase block size SVN-Revision: 21085	2010-04-22 15:27:42 +00:00
Gabor Juhos	81062a12ac	kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels SVN-Revision: 21081	2010-04-22 07:12:09 +00:00
Daniel Dickinson	fe5d55977e	tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120 SVN-Revision: 20850	2010-04-14 00:45:48 +00:00
Nicolas Thill	e2b57ecf5f	define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files SVN-Revision: 20834	2010-04-12 23:15:56 +00:00
Florian Fainelli	b87e590b24	do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 SVN-Revision: 20765	2010-04-09 18:43:36 +00:00
Florian Fainelli	2a4fb82289	flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. SVN-Revision: 20652	2010-04-01 21:20:43 +00:00
Florian Fainelli	dad85cddac	move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it SVN-Revision: 20548	2010-03-28 18:11:06 +00:00
Gabor Juhos	e66a368bd1	kernel: update to 2.6.32.10 SVN-Revision: 20444	2010-03-26 10:45:25 +00:00
Florian Fainelli	10d4e5b4b0	drop support for 2.6.30 kernel SVN-Revision: 20438	2010-03-26 10:12:48 +00:00
Florian Fainelli	928dfc550f	add support for D4PW board, patch from mexit SVN-Revision: 20420	2010-03-25 12:06:01 +00:00
Florian Fainelli	f2e91995ea	refresh 2.6.32 patches, fix livebox support (#6821 ) SVN-Revision: 20204	2010-03-14 16:21:28 +00:00
Nicolas Thill	e1863691d9	do not enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370]) SVN-Revision: 20136	2010-03-11 09:50:11 +00:00
Florian Fainelli	2c13d45b29	do not register devices in device_initcall level, this breaks the SSB SPROM registration SVN-Revision: 19957	2010-03-02 21:49:37 +00:00
Florian Fainelli	0cd5b9983f	remove mail headers from patches SVN-Revision: 19935	2010-03-01 14:55:34 +00:00
Florian Fainelli	4f4066d3e0	add support for 2.6.33 SVN-Revision: 19921	2010-02-28 21:24:34 +00:00
Florian Fainelli	984ac762e4	add support for 2.6.32, dropped the SPI patch for now SVN-Revision: 19919	2010-02-28 20:50:51 +00:00
Florian Fainelli	ada5848ba6	build images for RG100A (bcm6358-based boards) (#6755 ) SVN-Revision: 19894	2010-02-28 11:09:39 +00:00
Florian Fainelli	12a2f9b7b8	fix gpio-leds registration for boards having less than 8 LEDs (#6528 ) SVN-Revision: 19793	2010-02-21 14:27:17 +00:00
Florian Fainelli	8a1f7817d1	fix the receiving of packets with a 1500 mtu and vlan enabled (#6698 ) SVN-Revision: 19753	2010-02-19 11:56:13 +00:00
Imre Kaloz	825b37cc56	clean up handling of some kernel symbols SVN-Revision: 19581	2010-02-11 09:33:16 +00:00
Florian Fainelli	e716256d86	fix printing of mtd offsets, remove whitespaces. SVN-Revision: 19475	2010-01-31 21:37:25 +00:00
Florian Fainelli	b8d99458ff	move files to files-2.6.30, to ease newer kernel integration SVN-Revision: 19471	2010-01-31 21:00:50 +00:00
Daniel Dickinson	022594b0ed	brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comtrend CT-5261 SVN-Revision: 19361	2010-01-28 16:54:00 +00:00
Felix Fietkau	2aa0d20756	replace the hostapd preselection with a wpad preselection to enable proper client mode support in the default images SVN-Revision: 19293	2010-01-23 17:21:18 +00:00
Daniel Dickinson	f623119680	Fix typo in AGPF_S0 reset button definition SVN-Revision: 19160	2010-01-16 03:13:56 +00:00
Claudio Mignanti	b031e14bf0	bcm63xx: add gpio leds to alice gate SVN-Revision: 19152	2010-01-15 13:30:46 +00:00
Florian Fainelli	a47b8566a1	update to 2.6.30, refresh patches SVN-Revision: 18635	2009-12-04 14:52:45 +00:00
Felix Fietkau	fa0396c530	kernel: move CONFIG_MIPS_FPU_EMU to generic kernel config SVN-Revision: 18603	2009-11-29 14:31:55 +00:00

... 7 8 9 10 11 ...

1113 commits