openwrtv4

Author	SHA1	Message	Date
Felix Fietkau	ab529a529b	ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879	2013-06-07 13:42:50 +00:00
Felix Fietkau	1ace51360f	kernel/generic: add a few missing kernel config symbols Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36878	2013-06-07 13:42:39 +00:00
Florian Fainelli	2b9d084af9	brcm63xx: add user-space support for Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877	2013-06-06 22:22:20 +00:00
Florian Fainelli	42e69f45c7	brcm63xx: add kernel space and image support for the Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876	2013-06-06 22:22:14 +00:00
Florian Fainelli	966d47989b	brcm63xx: add Broadcom cable modem firmware format header Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36875	2013-06-06 22:22:09 +00:00
Florian Fainelli	600b59642e	brcm63xx: add support for BCM3368 Add support for the Broadcom BCM3368 cable modem chipset, includes: - Ethernet - SPI - UARTs - GPIOs - PCI Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36874	2013-06-06 22:21:58 +00:00
Jonas Gorski	1beaf031d1	target: don't build jffs2 nor images by default Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36863	2013-06-05 20:58:59 +00:00
Jonas Gorski	dd9a24663b	omap24xx: convert to use the new jffs2_nand Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36862	2013-06-05 20:58:55 +00:00
Jonas Gorski	e7b504ce8e	kirkwood: convert to use the new jffs2_nand Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36861	2013-06-05 20:58:53 +00:00
Imre Kaloz	799bdc990a	there's no reason to have these generic files in the bin dir either SVN-Revision: 36852	2013-06-05 06:46:41 +00:00
Imre Kaloz	28e8b8dc05	only copy uImages to the bin dir on ramdisk builds SVN-Revision: 36851	2013-06-05 06:17:12 +00:00
Imre Kaloz	e161581d45	don't copy the zImages to the bin dir, factory u-boots can't use them SVN-Revision: 36850	2013-06-05 06:04:48 +00:00
Gabor Juhos	5bb2e8030d	ar71xx: add support for WIFI button on tp-link tl-mr3220v2 The TP-LINK TL-MR3220 v2 has a button on the left side labeled "WIFI". This is GPIO 24. This patch adds the support for this button. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36848	2013-06-04 13:25:54 +00:00
Gabor Juhos	d187e3c32e	generic: add port mirroring/monitoring capability to rtl8366rb switch This patch adds swlib attributes to the RTL8366RB switch/PHY found in the TL-WR1043ND router that allow to mirror ethernet packets to a monitor port. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36847	2013-06-04 13:25:52 +00:00
Imre Kaloz	a0e412a616	versioned files and dirs still make no sense when you support only a single kernel... SVN-Revision: 36836	2013-06-04 11:29:01 +00:00
Imre Kaloz	3a56df33ad	refresh patches SVN-Revision: 36835	2013-06-04 11:24:42 +00:00
Imre Kaloz	8170c9cfb0	add some more symbols SVN-Revision: 36834	2013-06-04 11:23:27 +00:00
Imre Kaloz	812bb43a47	move DT2 related kernel options into the harddist subtarget SVN-Revision: 36833	2013-06-04 11:19:41 +00:00
Imre Kaloz	58fa46c90c	drop support for the dns323 SVN-Revision: 36832	2013-06-04 11:13:18 +00:00
John Crispin	e9ef65175d	lantiq: revert [36779] as it caused a regression submitter was informed of a endinaess swap regression and replied with "works on my board" revert the patch and make arv7518 wifi work again Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36807	2013-05-31 13:25:07 +00:00
Gabor Juhos	da66ea52ec	ar71xx: register USB port for RB2011U* devices Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36801	2013-05-30 17:38:31 +00:00
Gabor Juhos	23bcceb058	ar71xx: create a separated network interface for the RB2011UAS SFP port Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36800	2013-05-30 17:38:30 +00:00
Gabor Juhos	151dca0935	ar71xx: make the SFP port usable on RB2011S boards The port 6 of the switch is connected to the SFP cage on the RB2011S boards. Add a helper function to correctly initialize the switch configuration data on those boards to make the SFP port usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36799	2013-05-30 17:38:28 +00:00
Gabor Juhos	a1f91282b4	generic: ar8216: allow to specify SGMII config via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36798	2013-05-30 17:38:26 +00:00
Gabor Juhos	c170d3c3e4	generic: ar8216: add get_port_link callback Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36797	2013-05-30 17:38:22 +00:00
Gabor Juhos	3467b17e69	ar71xx: rb2011: add switch led control values Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36796	2013-05-30 17:38:21 +00:00
Gabor Juhos	4cf6e53ccc	ar71xx: rb2011: update RGMII RX/TX delay values Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36795	2013-05-30 17:38:20 +00:00
Gabor Juhos	6da63a8793	ar71xx: rb2011: move NAND nCE init to rb2011_nand_init Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36794	2013-05-30 17:38:17 +00:00
Gabor Juhos	50c59c4797	ar71xx: add user-space support for RB2011UAS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36793	2013-05-30 17:38:15 +00:00
Gabor Juhos	d6554bf66a	ar71xx: add kernel support for the RB2011UAS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36792	2013-05-30 17:38:13 +00:00
Gabor Juhos	8e56b1e742	generic: ar8216: show chip revision in the kernel log Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36791	2013-05-30 16:25:14 +00:00
Gabor Juhos	d19dae6e2d	ar71xx: add profile and build image for the Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36790	2013-05-30 16:23:10 +00:00
Gabor Juhos	35b5b38316	ar71xx: add user-space support for TP-LINK Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36789	2013-05-30 16:23:09 +00:00
Gabor Juhos	91d7c3efc1	ar71xx: add kernel support for the TP-LINK Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36788	2013-05-30 16:23:07 +00:00
Gabor Juhos	f02765086d	ar71xx: add USB workarounds for AR934x/QCA955x SoCs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36787	2013-05-30 16:23:06 +00:00
Gabor Juhos	6ff976a87a	ar71xx: add profile and build image for the DIR-601-B1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36786	2013-05-30 16:19:30 +00:00
Gabor Juhos	424c4c0b0a	ar71xx: allow to build CameoHornet images for multiple regions Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36785	2013-05-30 16:19:29 +00:00
Gabor Juhos	184dd34b6d	ar71xx: allow to override fw version in CameoHornet profile Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36784	2013-05-30 16:19:28 +00:00
John Crispin	e60cb01c45	lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting The GPIO buttons of ARV752DPW are active low. Treating them as active high caused a reboot loop as a reset-button press is detected by gpio-button-hotplug/gpio-keys-polled on startup. This fixes: https://dev.openwrt.org/ticket/12642 Signed-off-by: Rafael Gieschke <rafael@gieschke.de> SVN-Revision: 36783	2013-05-30 16:01:06 +00:00
John Crispin	c2b1e9eeef	lantiq: Fix ar8216 switch configuration On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36782	2013-05-30 16:00:59 +00:00
John Crispin	090a75447b	lantiq: DGN3500 support This requires all the preceding patches and finishes support for the DGN3500, also removing an obsolete file. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36781	2013-05-30 16:00:50 +00:00
John Crispin	a9968d9cb8	lantiq: enable retrieving kernel args from bootloader This patch is a device tree enhancement that IMHO is worthy of mainline. It allows the bootloader's commandline to be preserved even when the device tree specifies one. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36780	2013-05-30 16:00:42 +00:00
John Crispin	d1f3751d05	lantiq: wifi calibration from MTD This patch enables retrieving the wifi calibration data from an MTD partition. It requires the previous patch. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36779	2013-05-30 16:00:32 +00:00
John Crispin	83c3cd4ed9	lantiq: postpone PCI and wifi init This postpones the initialization of PCI and wifi until after the MTD initialization, so that calibration data may be loaded from there. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36778	2013-05-30 16:00:24 +00:00
John Crispin	b585923cc9	lantiq: fix LED-handling oversights This reassigns the PPPoE status to the LED that was intended to indicate it, rather than the DSL sync light. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36777	2013-05-30 16:00:15 +00:00
John Crispin	1756047518	ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775	2013-05-30 15:59:56 +00:00
Luka Perkov	4b21af4268	imx6: add new target SVN-Revision: 36753	2013-05-29 01:27:29 +00:00
Luka Perkov	846e3d40a0	kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches SVN-Revision: 36752	2013-05-29 01:27:27 +00:00
Gabor Juhos	c4d0a49348	ar71xx: typo in detect TL-MR10U/TL-MR11U At offset 0x40, signature for TL-MR10U/TL-MR11U begin from 0x00, not 0x10/0x11. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36727	2013-05-26 16:38:00 +00:00
Gabor Juhos	cc7bedf8a3	ar71xx: fix TL-MR10U usb power MR10U is closer to MR3040 than WR703N. This changes also enable USB power on GPIO18. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36726	2013-05-26 16:37:59 +00:00
Gabor Juhos	7d2182c455	kernel: update linux 3.9 to 3.9.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36725	2013-05-26 16:02:34 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Gabor Juhos	93ce462b7e	ar71xx: set eth0 mac address to match bottom label of the OM2P LC Signed-off-by: marek@open-mesh.com CC: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36723	2013-05-26 16:02:29 +00:00
Gabor Juhos	0842478e44	ar71xx: add TP-LINK TL-MR10U Small router with 4MB flash, 32MB RAM http://www.tp-link.com.cn/product_300.html Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36722	2013-05-26 16:02:26 +00:00
Luka Perkov	0998065a53	generic: ar8216: add port mirroring Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both RX and TX traffic from LAN port 1 to LAN port 4: $ swconfig dev switch0 set enable_mirror_rx 1 $ swconfig dev switch0 set enable_mirror_tx 1 $ swconfig dev switch0 set mirror_monitor_port 4 $ swconfig dev switch0 set mirror_source_port 1 Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36713	2013-05-24 13:10:22 +00:00
Felix Fietkau	fe7e52e4a4	ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36679	2013-05-21 09:45:46 +00:00
Jonas Gorski	a01be4a217	kernel: update 3.9 to 3.9.3 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36676	2013-05-20 16:57:00 +00:00
Jonas Gorski	3ac261cd21	ar7: drop obsolete 3.3 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36674	2013-05-20 12:42:44 +00:00
Jonas Gorski	334e6d4e0c	ar7: drop obsolete 3.6 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36673	2013-05-20 12:42:41 +00:00
Jonas Gorski	49c81c6e00	ar7: switch to 3.9 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36672	2013-05-20 12:42:38 +00:00
Jonas Gorski	c4b943c82c	ar7: add support for 3.9 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36671	2013-05-20 12:42:36 +00:00
Jonas Gorski	4d0fcd0c49	kernel: add some missing symbols/move them to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36670	2013-05-20 12:42:32 +00:00
Jonas Gorski	b751b5893c	brcm2708: make it boot on revision 2 raspberry pis * update the bootcode.bin to the newest version - gpu/cpu mem split is now configured through config.txt, so no need to create more than one sd card image (just edit the config.txt) - bootcode.bin now supports the never revision 2 raspberry pis * add a commented prepopulated config.txt for easier config changes Taken from <https://github.com/Evilpaul/RPi-config> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36668	2013-05-20 12:07:03 +00:00
Jonas Gorski	c0435a971e	kernel: generic: add 3.10-rc1 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36663	2013-05-19 18:36:15 +00:00
Jonas Gorski	0a62b7c148	bcm63xx: add 3.9 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36660	2013-05-19 18:32:13 +00:00
Jonas Gorski	1f4e5f77a0	bcm63xx: Simplify CFE detection. Check bootloader argument in mtd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: split into two patches, one for detection, one letting bcm63xxpart use it.] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36659	2013-05-19 18:32:02 +00:00
Jonas Gorski	6e2b85b401	kernel: update 3.9 to 3.9.2 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36658	2013-05-19 18:31:51 +00:00
Jonas Gorski	668604f91d	kernel: don't remove of_tables These are needed for OF setup of clocksource, clocks and irqchips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36657	2013-05-19 11:27:28 +00:00
Felix Fietkau	56478636aa	ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36646	2013-05-17 07:31:00 +00:00
Felix Fietkau	144cfb65a4	ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36631	2013-05-13 19:13:33 +00:00
Felix Fietkau	2c5a5d8736	kernel: add missing PHY ID for an AR8327 switch variant Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36630	2013-05-13 19:13:27 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Jonas Gorski	ed06d2ad5c	bcm63xx: don't build CRAMFS Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36616	2013-05-12 21:41:52 +00:00
Jonas Gorski	ccd7fbba87	led and buttons support for board DWV-S0 Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36615	2013-05-12 21:41:50 +00:00
Jonas Gorski	0a907fdb8a	bcm63xx: remove defconfig support All boards use uci-defaults, no need to keep defconfig support. SVN-Revision: 36610	2013-05-12 11:54:38 +00:00
Jonas Gorski	bbd02c6fb7	kernel: fix CVE-2013-1763 in older kernels Newer kernels were already fixed by upstream. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36607	2013-05-12 10:55:12 +00:00
Felix Fietkau	0be8dd36dc	ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36600	2013-05-09 23:32:46 +00:00
Jonas Gorski	0b03ff2028	kernel: make zlib and lzo modules selectable Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36592	2013-05-09 20:50:07 +00:00
Hauke Mehrtens	0b161c6f9e	kernel: b53: use correct oops for bcm5365 switch SVN-Revision: 36589	2013-05-09 20:01:58 +00:00
Jonas Gorski	98f6dc1b43	kernel: allow building zsmalloc as a module again zsmalloc was changed to a bool because of missing exports in the kernel, but we already export the required symbol, so change it back to tristate. Closes #13481. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36587	2013-05-09 19:19:36 +00:00
Gabor Juhos	cb3d71ca8e	ar71xx: use combined kernel image in the CameoHornet template This allow us to increase the kernel partition size, and ensures, that the -factory image still usable via the original interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36584	2013-05-08 17:11:10 +00:00
Gabor Juhos	f938a798f8	ar71xx: add profile and build image for the RNX-N360RT board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36582	2013-05-08 17:07:19 +00:00
Gabor Juhos	852b8e9490	ar71xx: add user-space model detection for the RNX-N360RT board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36581	2013-05-08 17:07:18 +00:00
Gabor Juhos	c70694e755	ar71xx: add profile and build image for Netgear WNDAP360 [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36580	2013-05-08 17:03:43 +00:00
Gabor Juhos	33a2cbfd5c	ar71xx: add user-space support for Netgear WNDAP360 [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36579	2013-05-08 17:03:42 +00:00
Gabor Juhos	10b3ca5ccb	ar71xx: add kernel support for Netgear WNDAP360 Here is corrected version (only thing not working are wifi LEDs). [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36578	2013-05-08 17:03:34 +00:00
Gabor Juhos	39467e78e7	kernel: update linux 3.9 to 3.9.1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36577	2013-05-08 08:53:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
Gabor Juhos	d09ba5ef10	ar71xx: Fix AP135 partition layout Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36575	2013-05-08 08:53:49 +00:00
John Crispin	eb10f052ce	lantiq: enable portmaps again and set max port to 2 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36573	2013-05-07 10:58:52 +00:00
John Crispin	036fb79052	ramips: drop 3.7 support Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572	2013-05-07 10:58:44 +00:00
John Crispin	16a17b318a	ramips: properly setup the FEATURES variable Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571	2013-05-07 10:58:30 +00:00
John Crispin	bd6e12d904	ramips: fix memory detection rt5350 Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568	2013-05-06 18:23:56 +00:00
John Crispin	899120ddef	ramips: enable dsp extensions for rt305x and rt3883 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567	2013-05-06 16:45:59 +00:00
John Crispin	849ff98669	ramips: fix fypo in ethernet driver rt288x, rt3883 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565	2013-05-06 16:45:43 +00:00
John Crispin	eddd7f5773	ramips: Update ARC Freestation profile These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564	2013-05-06 16:45:35 +00:00
John Crispin	4f1ff28f08	ramips: Support setting active_low in devicetree gpio-export Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563	2013-05-06 16:45:27 +00:00
John Crispin	6af3b6721b	ralink: unbreak uart pinmux handling Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562	2013-05-06 16:45:20 +00:00
John Crispin	7c04b3bd66	ramips: fix gpio base numbering make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561	2013-05-06 16:45:12 +00:00
John Crispin	338ff04cab	ramips: add gpio base properties to dtsi files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560	2013-05-06 16:45:04 +00:00
John Crispin	65760ede8b	ramips: unbreak rt2880 support Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559	2013-05-06 16:44:56 +00:00
John Crispin	28bdb9efe9	ramips: fix DIR-602D1 flash size Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558	2013-05-06 16:44:47 +00:00
John Crispin	1c89a60431	ramips: unbreak gpio handling for uart mux group this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543	2013-05-04 11:36:51 +00:00
Gabor Juhos	bb429757c8	at91: build .dtb file for the CalAmp LMU500 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36542	2013-05-03 19:01:00 +00:00
Gabor Juhos	ccf95fe938	ar71xx: Fix AP135 PCI AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36541	2013-05-03 19:00:58 +00:00
Felix Fietkau	18c588a570	ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36530	2013-05-03 09:12:19 +00:00
Felix Fietkau	30c4360345	kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36529	2013-05-02 15:59:57 +00:00
Jonas Gorski	24636fcabf	bcm63xx: split into two subtargets, generic and SMP Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527	2013-05-02 15:28:31 +00:00
Jonas Gorski	d11efa1428	bcm63xx: add SMP support for BCM6362 and BCM6368 BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36526	2013-05-02 15:28:26 +00:00
Jonas Gorski	8f15326acc	kernel: generic: don't strip /proc/irq on SMP /proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36525	2013-05-02 15:28:12 +00:00
Jonas Gorski	a80a4f3ec2	bcm63xx: fix hsspi flash registration for BCM6362 Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36524	2013-05-02 15:28:10 +00:00
Jonas Gorski	999a956f4c	bcm63xx: fix/enable livebox minipci Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36523	2013-05-02 15:28:07 +00:00
Jo-Philipp Wich	6ac2b3b76a	atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. SVN-Revision: 36513	2013-05-02 11:46:53 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Florian Fainelli	db02b0e4ee	brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36506	2013-05-01 21:52:25 +00:00
Florian Fainelli	292368409e	brcm63xx: add missing binary operands to BCM6345 ethernet patch Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36505	2013-05-01 21:12:40 +00:00
Florian Fainelli	6f48ccea02	brcm63xx: remove 3.7 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36504	2013-05-01 21:12:26 +00:00
Gabor Juhos	0ae43dbe9d	ar71xx: rename WNR2000v3 support patch Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36498	2013-04-30 10:44:11 +00:00
Gabor Juhos	d557a51a40	x86/geos: switch to 3.8.10 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36496	2013-04-30 10:44:09 +00:00
Gabor Juhos	0fa71ca3e5	linux/3.9: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36495	2013-04-30 10:44:08 +00:00
Gabor Juhos	41445b41cc	linux/3.8: use backported pcibios_get_phb_of_node patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36494	2013-04-30 10:44:07 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
Gabor Juhos	8e466dcdf4	at91: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36492	2013-04-30 10:43:58 +00:00
Gabor Juhos	d35545f3d7	linux/3.{8,9}: add missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36491	2013-04-30 10:43:57 +00:00
Gabor Juhos	25c45c0d53	linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36490	2013-04-30 10:43:56 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Hauke Mehrtens	ca7f9638d5	broadcom-diag: support for the WNDR3700v3 I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482	2013-04-28 21:11:17 +00:00
Hauke Mehrtens	7dee0dae35	brcm47xx: use kernel 3.8.10 as default kernel The biggest change with this kernel is a new partition parser. SVN-Revision: 36480	2013-04-28 18:25:16 +00:00
Hauke Mehrtens	00a7ace7cf	brcm47xx: add board detection for NETGEAR WNDR4500 V2 SVN-Revision: 36478	2013-04-28 18:19:31 +00:00
Hauke Mehrtens	e7e4afbb64	kernel: fix a memory leak in split_rootfs_data() allocate_partition() copies all the content of dpart into a new struct. SVN-Revision: 36475	2013-04-28 17:01:56 +00:00
Hauke Mehrtens	1bac172c44	kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. SVN-Revision: 36473	2013-04-28 16:52:11 +00:00
Jonas Gorski	ad1d3f00cb	kernel: update linux 3.9 patches to rc8 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36469	2013-04-28 11:55:23 +00:00
Jonas Gorski	a33dd13c98	kernel: add missing bcma defines and header file for bcrmfmac Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36468	2013-04-28 11:10:42 +00:00
Gabor Juhos	7c2632fbc5	ar71xx: add user-space support for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36461	2013-04-26 17:00:54 +00:00
Gabor Juhos	b29b7b65ea	ar71xx: add profile and build image for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36460	2013-04-26 17:00:53 +00:00
Gabor Juhos	9b3c0d11a2	ar71xx: Add Netgear WNR2000v3 support Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36459	2013-04-26 17:00:52 +00:00
Gabor Juhos	183e2af1c7	ar71xx: add profile and build image for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36458	2013-04-26 17:00:50 +00:00
Gabor Juhos	7c4e2c1f72	ar71xx: add user-space support for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36457	2013-04-26 17:00:49 +00:00
Gabor Juhos	5c11773f8a	ar71xx: add kernel support for TPLINK WR720N v3 Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36456	2013-04-26 17:00:48 +00:00
Gabor Juhos	c0691e29f1	mpc85xx: Add subtargets Generic and P1020 Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36454	2013-04-26 16:57:43 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	988ae9cbf8	at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452	2013-04-26 16:55:40 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	b42a173664	lantiq: make leds and network work on VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36445	2013-04-25 19:03:41 +00:00
John Crispin	520bf46375	lantiq: fix board detection helpers Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36444	2013-04-25 19:03:37 +00:00
John Crispin	157c86371f	lantiq: move dts files to thir own folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36443	2013-04-25 19:03:32 +00:00
John Crispin	4664e21293	generic: fix rtl8366_smi compile warning drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36442	2013-04-25 19:03:29 +00:00
John Crispin	9ae3adbe3c	lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36441	2013-04-25 19:03:25 +00:00
John Crispin	d3d18ae812	lantiq: make lzma-loader based images for VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36440	2013-04-25 19:03:21 +00:00
John Crispin	a46acc80e4	lantiq: update VG3503J.dts to match new partition layout Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36439	2013-04-25 19:03:17 +00:00
John Crispin	46306c2e47	lantiq: add lzma-loader source Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36438	2013-04-25 19:03:13 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
John Crispin	831c7ea04f	preinit: move cmdline failsafe= handling ot the generic code Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36430	2013-04-25 19:02:37 +00:00
Jonas Gorski	90986b5581	bcm63xx: update patches with upstream submissions SVN-Revision: 36407	2013-04-23 13:55:36 +00:00
Jonas Gorski	2a1a16d2d5	bcm63xx: switch to linux 3.8 SVN-Revision: 36406	2013-04-23 13:55:17 +00:00
Steven Barth	4e8f7f37ed	Change default IPv6 config to enable DHCPv6-PD SVN-Revision: 36384	2013-04-22 19:40:16 +00:00
Felix Fietkau	a8a01b42ae	kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL SVN-Revision: 36378	2013-04-22 15:01:36 +00:00
Felix Fietkau	cd35ea2174	ar71xx: merge more unaligned access hacks from cerowrt-next Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36374	2013-04-22 12:53:21 +00:00
Felix Fietkau	f58dcb59c6	kernel: backport SSB/BCMA changes in preparation for a compat-wireless update Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36367	2013-04-19 12:39:40 +00:00
Gabor Juhos	f03960723a	linux/3.9: add missing config symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36365	2013-04-19 08:07:38 +00:00
Gabor Juhos	e07848664c	linux/3.[89]: update bridge_remove_ipv6_dependency patch Fixes the following warning: CC [M] net/ipv6/addrconf.o net/ipv6/addrconf.c: In function 'addrconf_init': net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36364	2013-04-19 08:07:37 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
Felix Fietkau	96bb7c123b	build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351	2013-04-17 15:36:41 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Felix Fietkau	a662200205	kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360 ) SVN-Revision: 36342	2013-04-15 20:40:29 +00:00
Imre Kaloz	57b68daee9	refresh against -rc7 SVN-Revision: 36340	2013-04-15 16:10:01 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
Gabor Juhos	68c54dc34f	mpc85xx: use static SPI bus number for TL-WDR4900 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36329	2013-04-12 19:44:41 +00:00
Gabor Juhos	54635e7f78	linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36328	2013-04-12 19:44:38 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	10f432ba9d	fix rtl8366s OF binding Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36323	2013-04-12 18:56:05 +00:00
Gabor Juhos	687b3f04ce	mpc85xx: set preinit interface to eth0 by default This makes the WDR4900 accessible via ethernet in failsafe mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36322	2013-04-12 18:30:25 +00:00
Gabor Juhos	40e15b1fbf	mpc85xx: Generate fdt for P1020RDB Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36321	2013-04-12 18:30:24 +00:00
Gabor Juhos	f43bdf34cd	mpc85xx: Add P1020RDB board support Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36320	2013-04-12 18:30:22 +00:00
John Crispin	d5f87e193c	add VG3503J support this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36315	2013-04-11 19:18:07 +00:00
John Crispin	fbc1e3732b	add FE phy firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36314	2013-04-11 19:17:48 +00:00
John Crispin	0d32469457	add missing pinmux patch Fix lantiq pinmux which affected PCI and USB. Known affected boards are: ARV4518 and ARV7518. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36312	2013-04-11 07:12:37 +00:00
Felix Fietkau	6436b3f736	cns3xxx: fix USB ehci/ohci platform driver Update ehci/ohci driver registration to conform to the new platform drivers. This fixes missing USB host support in 3.8.x Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 36309	2013-04-10 16:20:50 +00:00
Felix Fietkau	edd8048107	kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base Fixes booting on single-core CNS3xxx devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36308	2013-04-10 16:07:50 +00:00
Felix Fietkau	06733c2650	kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36307	2013-04-10 13:45:12 +00:00
Felix Fietkau	7fa2957103	kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36304	2013-04-10 13:11:29 +00:00
Felix Fietkau	df3d4690bd	kernel: keep dropped stats in fq_codel Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36303	2013-04-10 13:11:25 +00:00
Felix Fietkau	ec3a8846fc	kernel: tune fq_codel defaults for common netdevice speeds Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36302	2013-04-10 13:11:21 +00:00
Felix Fietkau	307965026a	kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36301	2013-04-10 13:11:16 +00:00
Florian Fainelli	915969ff2c	kernel: refresh patches against 3.9-rc6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36297	2013-04-09 16:16:20 +00:00
Florian Fainelli	c3366cd164	kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36296	2013-04-09 16:16:16 +00:00
Florian Fainelli	518d6a9273	kernel: backport switch user API changes after r36283 3.3 and 3.6 kernels do not make use of the UAPI headers, still they need to provide an up-to-date switch.h copy for swconfig to build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36295	2013-04-09 15:47:01 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide\|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
John Crispin	fff58a5801	allow loading port maps from OF Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283	2013-04-09 14:19:09 +00:00
Steven Barth	ea94d66b0f	Adapt default network configuration for IPv6 SVN-Revision: 36278	2013-04-09 08:03:08 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	9e6ae6ab5d	x86/generic: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36256	2013-04-07 15:53:17 +00:00
Gabor Juhos	0d0bfe3d41	x86/generic: switch to 3.8 Only tested within a VM. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36255	2013-04-07 15:53:15 +00:00
Gabor Juhos	f5d28ea3ce	x86/generic: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36254	2013-04-07 15:53:13 +00:00
Gabor Juhos	71a51e3b91	x86/alix2: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36253	2013-04-07 15:53:11 +00:00
Gabor Juhos	15d311ec18	x86/alix2: switch to 3.8 Tested on an alix2d13 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36252	2013-04-07 15:53:09 +00:00
Gabor Juhos	9d05b1b683	x86/alix2: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36251	2013-04-07 15:53:08 +00:00
Gabor Juhos	89f690843f	x86: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36250	2013-04-07 15:53:05 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Felix Fietkau	fde143b66f	cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36241	2013-04-07 11:24:30 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Hauke Mehrtens	4a46687d25	brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235	2013-04-06 22:22:26 +00:00
Hauke Mehrtens	204bde8d98	brcm47xx: fix error in board detection when nvram is not available. SVN-Revision: 36234	2013-04-06 19:02:25 +00:00
Gabor Juhos	d45ef216e6	linux/3.8: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36233	2013-04-06 17:33:03 +00:00
Gabor Juhos	51fa28e2c2	linux/3.8: backport devm_ioremap_resource from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36232	2013-04-06 17:33:00 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	747b795b56	generic: rtl8367: add compatible string with vendor prefix Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36230	2013-04-06 17:19:31 +00:00
Gabor Juhos	f5d8d80ca9	generic: rtl8367b: fix rtl8367b_extif_init_of * disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36229	2013-04-06 17:03:09 +00:00
Gabor Juhos	32d3b456f0	linux/3.8: add more missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36228	2013-04-06 16:56:47 +00:00
Gabor Juhos	89539462a8	linux/3.8: add missing symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36226	2013-04-06 16:38:36 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	38bd9b4337	generic: rtl8367: allow to load extif config from OF Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36220	2013-04-06 12:37:36 +00:00
Gabor Juhos	585d19d168	generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36219	2013-04-06 12:37:34 +00:00
Gabor Juhos	68c931c637	generic: rtl8367: add vendor prefix to the compatible string Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36218	2013-04-06 12:37:32 +00:00
Gabor Juhos	348640f4b3	ramips: rt3883: sync 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36217	2013-04-06 12:37:31 +00:00
John Crispin	d16de0b69f	fix typo pinmmux -> pinmux Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36216	2013-04-06 11:46:34 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
Gabor Juhos	202fb45deb	refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36214	2013-04-06 11:40:41 +00:00
John Crispin	df7af06f1f	fix dir-615 h1 network config http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> SVN-Revision: 36213	2013-04-05 23:37:45 +00:00
John Crispin	e1a74d8ff7	fix typo that made gpiomuxing fail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36212	2013-04-05 23:10:42 +00:00
Florian Fainelli	495296bba9	malta: add le64 and be64 sub targets These two subtargets are used to build a 64-bit malta kernel along with 64-bit userland support. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36211	2013-04-05 12:36:48 +00:00
Florian Fainelli	12b925dcbf	malta: move 32-bits options to subtarget config Preliminary change to add support for MIPS64-based malta subtargets. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36210	2013-04-05 12:36:45 +00:00
Florian Fainelli	5eb8ba7f19	malta: move endianness kernel configuration to subtarget Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36209	2013-04-05 12:36:41 +00:00
Florian Fainelli	46dfa04a08	malta: enable mips16 feature flag The malta platform supports mips16 advertise this feature flag. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36203	2013-04-05 12:36:16 +00:00
John Crispin	d9bb7ff7a5	Migrate lantiq platform to common led helper functions http://patchwork.openwrt.org/patch/3316/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36187	2013-04-03 10:01:07 +00:00
John Crispin	a4c745ee74	add a missing patch that makes board detection work again Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36186	2013-04-03 10:01:03 +00:00
John Crispin	c838ec2391	Patch for invoking (pre)init http://patchwork.openwrt.org/patch/3485/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 36183	2013-04-03 10:00:50 +00:00
John Crispin	93899a1329	add profile for tenda w150m board http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176	2013-04-03 10:00:21 +00:00
John Crispin	7e54357bd5	fix ALL5002 default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36175	2013-04-03 10:00:16 +00:00
John Crispin	37401dca92	Build WW factory image for DAP-1350 http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174	2013-04-03 10:00:12 +00:00
John Crispin	910b705155	add Huawei D105 http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173	2013-04-03 10:00:08 +00:00
John Crispin	c1710901c5	add profile for the Edimax 3g-6200NL board http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172	2013-04-03 10:00:03 +00:00
John Crispin	f3643374c4	there is no ttyS1 console Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36171	2013-04-03 09:59:59 +00:00
John Crispin	99e0ff1123	make v3.8 the default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36170	2013-04-03 09:59:55 +00:00
John Crispin	c8d5f5e0ef	add new image/Makefile Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169	2013-04-03 09:59:51 +00:00
John Crispin	770b28f146	add the dts files that describe the boards in future Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36168	2013-04-03 09:59:46 +00:00
John Crispin	2328e8389e	fix upvel profile names Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36167	2013-04-03 09:59:41 +00:00
John Crispin	94972a5268	fix rt3883 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36166	2013-04-03 09:59:37 +00:00
John Crispin	0716ae8abe	fix rt305x config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36165	2013-04-03 09:59:33 +00:00
John Crispin	dce4945972	mark rt288x broken until the test hardware arrives in the mail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36164	2013-04-03 09:59:16 +00:00
John Crispin	46f141637c	add patches for v3.8 Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36163	2013-04-03 09:59:10 +00:00
John Crispin	4f86ea43ca	remove old ralink 3.8 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36162	2013-04-03 09:58:48 +00:00
John Crispin	d4db00205d	move files to files-3.7 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161	2013-04-03 09:58:44 +00:00
John Crispin	86a691144b	add feature gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36160	2013-04-03 09:58:37 +00:00
John Crispin	1105bd2897	add OF support to rtl8367b driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36159	2013-04-03 09:58:33 +00:00
John Crispin	cc34858d4a	make firmware loading work on v3.9 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36158	2013-04-03 09:58:28 +00:00
Felix Fietkau	72f5901eb1	mpc85xx: enable ath9k and wpad-mini by default SVN-Revision: 36142	2013-04-01 09:53:29 +00:00
Hauke Mehrtens	98ef9e5411	brcm47xx: generate images for Linksys E.... models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36139	2013-03-27 15:51:28 +00:00
Hauke Mehrtens	b4eabad019	gemini: remove usage of ehci_port_power() it was removed in kernel 3.8 SVN-Revision: 36138	2013-03-27 15:48:07 +00:00
Hauke Mehrtens	31c9452120	brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported. SVN-Revision: 36137	2013-03-27 15:35:52 +00:00
Hauke Mehrtens	a9e5a178ef	brcm47xx: generate images for more WRT...N models Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 36136	2013-03-27 15:34:55 +00:00
Imre Kaloz	b92e750027	upgrade to 3.9-rc4, disable unsupported boards SVN-Revision: 36128	2013-03-25 14:18:32 +00:00
Imre Kaloz	c90078ce87	refresh patches against -rc4 SVN-Revision: 36127	2013-03-25 13:53:48 +00:00
Imre Kaloz	f26378fd7c	add missing symbols SVN-Revision: 36126	2013-03-25 13:53:17 +00:00
Gabor Juhos	f7da2127ab	ar71xx: fix ethernet LEDs on the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36122	2013-03-25 06:40:03 +00:00
Gabor Juhos	39c132d154	ar71xx: add GPIO output select values for AR934x Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36121	2013-03-25 06:40:00 +00:00
Gabor Juhos	849201b1d8	ar71xx: add default LED configuration for the WL-WRD3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36120	2013-03-24 21:07:21 +00:00
Gabor Juhos	cd5cca4ba8	ar71xx: fix USB power GPIO on the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36119	2013-03-24 19:23:47 +00:00
Gabor Juhos	4daefc9480	ar71xx: remove numeric suffix of the TL-WDR3500 USB LED Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36118	2013-03-24 19:23:45 +00:00
Gabor Juhos	a4a2a7189f	ar71xx: add diag support for the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36117	2013-03-24 19:23:43 +00:00
Gabor Juhos	38c991311b	ar71xx: add default switch configuration for the TL-WDR3500 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36116	2013-03-24 19:23:36 +00:00
Hauke Mehrtens	bb81e695f9	kernel: add missing config options for au1000 target SVN-Revision: 36115	2013-03-24 14:01:38 +00:00
Hauke Mehrtens	18c47be19a	kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option. SVN-Revision: 36102	2013-03-21 14:56:04 +00:00
Hauke Mehrtens	4995f23669	kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected This was turned from a silent confg option without a text to a normal config option which could be selected without any other option depending on this. This could cause the situation where REGMAP_SPI was selected without SPI_MASTER being selected. SVN-Revision: 36101	2013-03-21 14:50:59 +00:00
Hauke Mehrtens	d5cf67297a	brcm47xx: generate images for some more devices These devices should be supported by trunk now. SVN-Revision: 36099	2013-03-20 22:01:18 +00:00
Hauke Mehrtens	c9544f4af0	kernel: add some fixes for kernel 3.9 This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages. SVN-Revision: 36098	2013-03-20 21:59:24 +00:00
Hauke Mehrtens	99638c5288	kernel: add some missing config options for kernel 3.9 SVN-Revision: 36097	2013-03-20 21:53:51 +00:00
Florian Fainelli	b1cc7a90a4	kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193 ) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36091	2013-03-19 14:13:39 +00:00
Florian Fainelli	fe157ea1ba	uml: remove 3.6 kernel patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36080	2013-03-17 19:47:04 +00:00
Florian Fainelli	1898218119	uml: remove 3.3. kernel patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36079	2013-03-17 19:46:59 +00:00
Florian Fainelli	c36db5f66a	uml: switch to 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36078	2013-03-17 19:46:54 +00:00
Florian Fainelli	a987d1aaa3	uml: add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36077	2013-03-17 19:46:49 +00:00
Florian Fainelli	499f92c3db	uml: remove 3.2 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36076	2013-03-17 19:46:43 +00:00
Florian Fainelli	ce33aaafcf	ep93xx: switch to 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36075	2013-03-17 19:46:37 +00:00
Florian Fainelli	a5551d366a	kernel: refresh 3.9 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36074	2013-03-17 19:46:32 +00:00
Florian Fainelli	472bb8d51a	ep93xx: add support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36073	2013-03-17 19:46:25 +00:00
Florian Fainelli	743e9e7009	ep93xx: account for sound soc directory rename in 3.7 sound/soc/ep93xx -> sound/soc/cirrus Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36071	2013-03-17 19:45:55 +00:00
Florian Fainelli	6a7100c760	kernel: set regmap-core module license Fixes the following issues: [ 7.660000] regmap_core: module license 'unspecified' taints kernel [ 7.690000] Disabling lock debugging due to kernel [ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0 [ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0 [ 7.720000] regmap_core: Unknown symbol devres_add (err 0 [ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0 [ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0 [ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0 [ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0 [ 7.780000] regmap_core: Unknown symbol devres_free (err 0 [ 7.800000] regmap_core: Unknown symbol devres_find (err 0 [ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36070	2013-03-17 19:45:48 +00:00
Florian Fainelli	7987c8d0dc	au1000: remove support for 3.3. kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36067	2013-03-17 14:33:47 +00:00
Florian Fainelli	c56c18168e	au1000: switch to 3.6 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36066	2013-03-17 14:33:41 +00:00
Florian Fainelli	5592a619d0	au1000: keep the MTX-1 watchdog pin low during boot Do this until the watchdog driver is loaded and the user-space watchdog daemon can start pinging the watchdog. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36065	2013-03-17 14:33:36 +00:00
Florian Fainelli	d5c2e83fa5	ep93xx: remove 3.3 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36064	2013-03-17 14:33:23 +00:00
Florian Fainelli	9cef30a519	mcs814x: use devm_request_and_ioremap in mcs814x-rng driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36063	2013-03-17 14:33:18 +00:00
Florian Fainelli	8ed2299646	mcs814x: use devm_request_and_ioremap helper for nuport_mac driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36062	2013-03-17 14:33:13 +00:00
Florian Fainelli	8bc84bac31	mcs814x: remove PCI code None of the boards we support are using it nor have it wired out of the SoC, just remove it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36061	2013-03-17 14:33:07 +00:00
Florian Fainelli	a9ef927cce	mcs814x: implement MULTI_IRQ_HANDLER Allows us to get rid of the IRQ entry point assembly Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36060	2013-03-16 22:25:47 +00:00
Florian Fainelli	18908139f3	mcs814x: use the standard device tree binding to represent a PHY node Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36059	2013-03-16 22:25:41 +00:00
Gabor Juhos	1996cfe9dd	mpc85xx: add profile and build image for the TL-WDR4900 v1 board Now that the ethernet switch is working, create firmware images to make impatient users happy. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36051	2013-03-15 16:11:45 +00:00
Gabor Juhos	72253b9073	generic: ar8216: start AR8327 switch from the probe routine The AR8327 switch gets its configuration from platform data or from the device-tree. This allows to start it from the probe routine. Doing so makes it usable with ethernet drivers which only connects to the PHY device when the ethernet interface is opened. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36050	2013-03-15 16:06:28 +00:00
Gabor Juhos	5503686f69	generic: ar8216: add ar8xxx_start helper Move switch starting code into a separate function. This makes it usable from other places. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36049	2013-03-15 16:06:25 +00:00
Gabor Juhos	44ce8dac88	mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36048	2013-03-15 15:53:06 +00:00
Gabor Juhos	7ba6a8d8e8	generic: ar8216: add OF configuration support for AR8327 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36047	2013-03-15 15:50:08 +00:00
Gabor Juhos	ee12b1b7d5	generic: ar8216: separate platform_data based AR8327 code Move platform_data specific configuration code into a separate routine. Do it in preparation for the upcoming OF support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36046	2013-03-15 15:50:05 +00:00
Gabor Juhos	d88f66ae21	generic: ar8216: don't use platform_data in ar8327_init_port Fetch the PORT_STATUS values in ar8327_hw_init and store those in a private data stucture for later use. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36045	2013-03-15 15:50:02 +00:00
Gabor Juhos	9d3f70d503	generic: ar8216: move the ar8327_get_port_init_status function It will be used in ar8327_probe routine. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36044	2013-03-15 15:50:00 +00:00
Gabor Juhos	17d735fc46	generic: ar8216: simplify and rename ar8327_config_port Return with the PORT_STATUS register value instead of writing that directly into the corresponding register. Also rename the function to ar8327_get_port_init_status. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36043	2013-03-15 15:49:57 +00:00
Gabor Juhos	3fee1bddbe	generic: ar8216: remove superfluous pdata checks The presence of the platform data is already verified in ar8327_hw_init, and the driver does not start without that anyway. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36042	2013-03-15 15:49:55 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
Gabor Juhos	d614f8a880	ar71xx: build images for the TL-MR11U v2 [juhosg: use different profile name for v1 and v2, and add multi profile to build for both versions] Signed-off-by: Guilhem Lettron <guilhem@lettron.fr> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36038	2013-03-15 14:35:52 +00:00
Gabor Juhos	35d41db979	ar71xx: rw2458n - Use eeprom (art) from wifi card Use eeprom (art) from included wifi card, not hard coded in flash. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36037	2013-03-15 14:35:50 +00:00
Gabor Juhos	8deffcba7e	ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration Error in using another MDIO (AP123 platform using only one GE1 device for eth0 and eth1) for the router mr3420v2. ?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779 Routers in this sense are the same and the only difference is: USB port, USB led, instead of the GPIO-switch we have GPIO-button. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36036	2013-03-15 14:35:48 +00:00
John Crispin	4d5860cdd6	ACMP252: fix USB-enable GPIO and use default PCI configuration for now EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 36030	2013-03-14 18:43:54 +00:00
John Crispin	0dbe4f502d	fix buttons on vr9 eval kit Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36029	2013-03-14 18:43:49 +00:00
John Crispin	9b4a8c6d1e	select vdsl packages on vr9 boards Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36028	2013-03-14 18:43:44 +00:00
John Crispin	0f7f1f3347	fix fritzbox 3370 partitions/memory/cmdline Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36027	2013-03-14 18:43:39 +00:00
John Crispin	5452dbad61	build jffs images for nand based fritzbox Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36026	2013-03-14 18:43:34 +00:00
John Crispin	b98ae2b149	bump to v3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36014	2013-03-14 18:42:29 +00:00
John Crispin	3ab75692f3	move GPHY FW blobs to non versioned folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36013	2013-03-14 18:42:21 +00:00
Florian Fainelli	b2e63b8ea8	kernel: add support for 3.9-rc2 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36008	2013-03-14 14:45:56 +00:00
John Crispin	1360067c4a	update the /init file to start /sbin/init Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36002	2013-03-13 18:11:13 +00:00
John Crispin	043d56b646	make sure the console works when using procd as our pid 1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36000	2013-03-13 18:11:00 +00:00
Gabor Juhos	f0f72ce262	gemini: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35995	2013-03-12 18:22:34 +00:00
Gabor Juhos	04f2ef9e66	gemini: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35994	2013-03-12 18:22:33 +00:00
Gabor Juhos	54b9b4d8a5	gemini: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35993	2013-03-12 18:22:22 +00:00
John Crispin	48a4b3a0cd	fixes NO_XIP on CFI0001 flash This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 35992	2013-03-12 13:53:08 +00:00
John Crispin	e3a6ea65e1	add support for AudioCodes AC-252 user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35990	2013-03-12 13:52:54 +00:00
John Crispin	0b881eea72	unbreak dgn3500 spi-gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35989	2013-03-12 13:52:47 +00:00
John Crispin	b22cbac68f	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35988	2013-03-12 13:52:40 +00:00
John Crispin	fad5f5700e	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35987	2013-03-12 13:52:33 +00:00
Gabor Juhos	76934b6779	avr32: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35985	2013-03-12 13:28:33 +00:00
Gabor Juhos	a71b9f5d04	avr32: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35984	2013-03-12 13:28:32 +00:00
Gabor Juhos	19b2c06b09	avr32: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35983	2013-03-12 13:28:31 +00:00
Gabor Juhos	f04cccb842	avr32: add sysupgrade support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35982	2013-03-12 13:28:27 +00:00
Gabor Juhos	6c3dd84897	avr32: add firmware partition Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35981	2013-03-12 13:28:23 +00:00
Gabor Juhos	cb9fad715c	avr32: add diag support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35980	2013-03-12 13:28:21 +00:00
Gabor Juhos	de0d19ac3d	avr32: create network config dynamically The default network configuration from base-files is not correct for the NGW100 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35979	2013-03-12 13:28:19 +00:00
Gabor Juhos	73caeba522	avr32: built the firmware images from the lzma compressed uImage Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35978	2013-03-12 13:28:16 +00:00
Gabor Juhos	12a213227e	mpc52xx: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35977	2013-03-12 07:18:37 +00:00
Gabor Juhos	1ed39da53d	mpc52xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35976	2013-03-12 07:18:36 +00:00
Gabor Juhos	ae0af74654	mpc52xx: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35975	2013-03-12 07:18:34 +00:00
Gabor Juhos	fe3df4b593	ramips: add profile and build image for the Upvel UR-326N4G board Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972	2013-03-11 21:02:45 +00:00
Gabor Juhos	d543f4b771	ramips: add user-space support for the Upvel UR-326N4G board [juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35971	2013-03-11 21:02:43 +00:00
Gabor Juhos	3c2ef04a0e	ramips: add kernel support for the Upvel UR-326N4G board [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970	2013-03-11 21:02:40 +00:00
Gabor Juhos	14ca5fc98b	ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35966	2013-03-11 19:52:54 +00:00
Gabor Juhos	72fc0c1906	ar71xx: add AR934X_GPIO_FUNC_* defines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35965	2013-03-11 19:52:51 +00:00
Gabor Juhos	44cc1507e9	ar71xx: makefile changes to build image for MR3420v2 Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3440/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35964	2013-03-11 15:55:25 +00:00
Gabor Juhos	2998abab7c	ar71xx: add user-space support for MR3420v2 Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3442/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35962	2013-03-11 15:55:22 +00:00
Gabor Juhos	902dd27383	ar71xx: add kernel support for MR3420v2 [juhosg: use gpio_request_one to enable the USB power] Patch-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@opewrt.org> SVN-Revision: 35961	2013-03-11 15:55:20 +00:00
Gabor Juhos	5c5e1c0a9d	ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U LAN1 and LAN2 LEDs not present (it pulled to ground via resistors) on MR3040 and MR11U devices. This little patch enabling ability to control GPIO14 and GPIO15. Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3439/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35960	2013-03-11 15:55:19 +00:00
Gabor Juhos	257bfc21af	ar71xx: add profile support for dir-835-a1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35959	2013-03-11 15:55:17 +00:00
Gabor Juhos	3fa3cbae7c	ar71xx: add user space support for dir-835-a1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3425/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35958	2013-03-11 15:55:15 +00:00
Gabor Juhos	a7525f5f5d	ar71xx: add kernel support for dir-835-a1 [juhosg: - remove custom mdio bus info and platform data for ar8327, clear the .led_cfg field from dir835a1_setup instead, - remove arguments of dir835c1_generic_setup function, register the LEDs directly from the board specific setup instead] Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3426/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35957	2013-03-11 15:55:13 +00:00
Felix Fietkau	bd6c9d6252	cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure SVN-Revision: 35953	2013-03-11 02:29:53 +00:00
Felix Fietkau	d7a529709a	cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler SVN-Revision: 35952	2013-03-11 02:29:47 +00:00
Felix Fietkau	0d13baff1e	cns3xxx: increase number of ethernet driver rx buffers SVN-Revision: 35951	2013-03-10 21:59:32 +00:00
Felix Fietkau	ee2b511e1f	cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries SVN-Revision: 35950	2013-03-10 21:59:28 +00:00
Felix Fietkau	d22ac8d8fb	cns3xxx: minor ethernet driver cleanup SVN-Revision: 35949	2013-03-10 21:59:21 +00:00
Hauke Mehrtens	e1f24d99e1	brcm47xx: refresh config SVN-Revision: 35948	2013-03-10 20:42:26 +00:00
Hauke Mehrtens	89d4fceee2	xburst: fix compilation: remove the __dev attributes SVN-Revision: 35946	2013-03-10 20:26:28 +00:00
Hauke Mehrtens	45b24fa771	kernel: add some missing config options found by the buildbot. SVN-Revision: 35945	2013-03-10 20:25:19 +00:00
Felix Fietkau	9facda9570	cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers SVN-Revision: 35943	2013-03-10 18:25:20 +00:00
Felix Fietkau	c44506fcbd	cns3xxx: fix an rx irq handling corner case When an rx interrupt comes in, rx interrupts are disabled and NAPI polling is scheduled. During the NAPI poll, the driver first processes received frames in the ring, then fills the dma descriptor slots with new buffers and calls tx complete, before finally re-enabling rx interrupts and completing NAPI (if below the budget). If the hardware rx queue overflows before the napi complete is called, the hardware will not throw any further rx interrupts and rx processing stops completely. Fix this by keeping NAPI polling scheduled until it completes a poll without receiving any packets, and also handle NAPI completion before refilling rx or completing tx. SVN-Revision: 35942	2013-03-10 18:25:16 +00:00
Felix Fietkau	c1adc79328	cns3xxx: fix ethernet driver memory barrier usage SVN-Revision: 35941	2013-03-10 18:25:11 +00:00
Gabor Juhos	9a71711d39	realview: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35940	2013-03-10 18:06:31 +00:00
Gabor Juhos	35dd42f976	realview: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35939	2013-03-10 18:06:29 +00:00
Felix Fietkau	53e0f10246	kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm SVN-Revision: 35938	2013-03-10 17:04:36 +00:00
Felix Fietkau	2b83c9bd8a	kernel: ensure that the arm exception handlers get preserved SVN-Revision: 35937	2013-03-10 17:04:31 +00:00
Felix Fietkau	f0d7ba33ef	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors SVN-Revision: 35936	2013-03-10 14:51:42 +00:00
Gabor Juhos	5b3ab0e21e	xburst: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35934	2013-03-10 13:24:54 +00:00
Gabor Juhos	00caedf86e	xburst: switch to 3.8 Compile tested only, so add broken flag. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35933	2013-03-10 13:24:52 +00:00
Gabor Juhos	8942d4dc04	xburst: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35932	2013-03-10 13:24:50 +00:00
Gabor Juhos	15718f5387	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35931	2013-03-10 13:24:47 +00:00
Gabor Juhos	f25c050aa9	adm5120: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35930	2013-03-10 13:24:46 +00:00
Gabor Juhos	5502bbe2ca	adm5120: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35929	2013-03-10 13:24:45 +00:00
Gabor Juhos	c42da71d8b	malta: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35928	2013-03-10 13:24:44 +00:00
Gabor Juhos	6720fc6952	malta: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35927	2013-03-10 13:24:43 +00:00
Gabor Juhos	82dc64b19b	atheros: remove 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35926	2013-03-10 13:24:42 +00:00
Gabor Juhos	5b8e106ae6	atheros: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35925	2013-03-10 13:24:40 +00:00
Gabor Juhos	ce5806378e	mpc83xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35924	2013-03-10 13:24:39 +00:00
Gabor Juhos	c79c132229	mpc83xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35923	2013-03-10 13:24:38 +00:00
Gabor Juhos	27ba973c06	rb532: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35922	2013-03-10 13:21:40 +00:00
Gabor Juhos	501e4d331d	rb532: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35921	2013-03-10 13:21:33 +00:00
Gabor Juhos	8223205a29	rb532: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35920	2013-03-10 13:21:29 +00:00
Gabor Juhos	e8a5312bef	ar71xx: correct board name to make LEDs work on RB750 Patch by: Denver A <denvera@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3419/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35919	2013-03-10 07:20:57 +00:00
Gabor Juhos	d85ffaabe9	ppc40x: remove __dev_{in,ex}it annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35918	2013-03-10 07:20:54 +00:00
Felix Fietkau	446409f43e	cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance SVN-Revision: 35917	2013-03-10 01:27:04 +00:00
Felix Fietkau	95431b7843	cns3xxx: remove linux 3.3 support SVN-Revision: 35916	2013-03-10 01:01:55 +00:00
Felix Fietkau	3d919b7c08	cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance) SVN-Revision: 35915	2013-03-10 01:01:51 +00:00
Hauke Mehrtens	44ed7d664a	brcm47xx: add some more partition parser fixes by Rafał Miłecki SVN-Revision: 35912	2013-03-09 19:48:03 +00:00
Hauke Mehrtens	694050a4cf	brcm47xx: netconfig: add bacis support for swconfig Parse the cpu port from swconfig and explicitly mark the cpu port as tagged. SVN-Revision: 35911	2013-03-09 19:24:43 +00:00
Felix Fietkau	72af5b4b35	kernel: add a missing config symbol for 3.8 SVN-Revision: 35910	2013-03-09 19:04:37 +00:00
Felix Fietkau	95f14d052a	cns3xxx: add linux 3.8 support and use it by default SVN-Revision: 35908	2013-03-09 18:51:46 +00:00
Felix Fietkau	85348d602e	kernel: fix mpcore watchdog symbol export SVN-Revision: 35907	2013-03-09 18:51:39 +00:00
Gabor Juhos	938361b055	cns21xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35886	2013-03-04 16:08:41 +00:00
Gabor Juhos	a61431b154	cns21xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35885	2013-03-04 16:08:39 +00:00
Gabor Juhos	3e3fc552bc	ppc44x: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35884	2013-03-04 15:16:37 +00:00
Gabor Juhos	d24041665c	ppc44x: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35883	2013-03-04 15:16:35 +00:00
Gabor Juhos	c67127ad23	ppc40x: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35882	2013-03-04 15:16:33 +00:00
Gabor Juhos	341b5ba939	ppc40x: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35881	2013-03-04 15:16:32 +00:00
Florian Fainelli	b412a81524	brcm63xx: fix LED names for various boards Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35880	2013-03-04 13:42:35 +00:00
Gabor Juhos	947bc9d36f	ar71xx: add backported watchdog patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35879	2013-03-04 12:08:28 +00:00
Gabor Juhos	1d55249d7c	ar71xx: use backported QCA955x patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35878	2013-03-04 11:48:15 +00:00
Gabor Juhos	64a9fe2894	ar71xx: use backported PCI patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35877	2013-03-04 11:48:08 +00:00
Gabor Juhos	12d49b5195	ar71xx: use backported MISC IRQ patch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35876	2013-03-04 11:48:06 +00:00
Gabor Juhos	4c31b9f43e	ar71xx: use backported GPIO patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35875	2013-03-04 11:48:04 +00:00
Luka Perkov	120028af99	ar71xx: enable building ramdisk images for WZRHPG30XNH board types Signed-off-by: Luka Perkov <luka@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35874	2013-03-04 11:37:28 +00:00
Gabor Juhos	0ad50b0bec	ar71xx: use backported SPI patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35873	2013-03-04 09:40:44 +00:00
Gabor Juhos	c28cdfab31	mpc85xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35872	2013-03-04 09:37:25 +00:00
Gabor Juhos	84e960f7aa	mpc85xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35871	2013-03-04 09:37:24 +00:00
Gabor Juhos	3ee484d54c	ar71xx: remove 3.7 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35870	2013-03-04 09:03:50 +00:00
Gabor Juhos	d5adb0dbdd	ar71xx: switch to 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35869	2013-03-04 08:47:38 +00:00
Gabor Juhos	a87a96da67	kernel: update linux 3.8 to 3.8.2 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35868	2013-03-04 08:43:55 +00:00
Luka Perkov	a5ebfc79ba	ar71xx: rework changes from r35840 Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35865	2013-03-03 21:59:34 +00:00
Gabor Juhos	26fbc15a86	kernel: update linux 3.8 to 3.8.1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35862	2013-03-03 13:58:52 +00:00
Gabor Juhos	da79a4c698	linux/3.8: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35861	2013-03-03 13:58:10 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Gabor Juhos	4491da2bd4	ar71xx: update MAC address assignment for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35855	2013-03-03 12:47:37 +00:00
Gabor Juhos	200aa6db83	ar71xx: fixes leds for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35854	2013-03-03 12:47:33 +00:00
Gabor Juhos	8798c73860	ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension All known rt305x and rt3883 implementations support at least the 24kec instruction set which includes the DSP extension. For rt288x, the previous value mips32r2 is kept. The cpu target is now set per sub-archtecture, according to cpu-feature-overrides.h of each SoC family. [juhosg: define ARCH_PACKAGES variable for rt305x/rt3883 in order to differentiate the packages compiled with the 24Kec option.] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35853	2013-03-03 12:47:31 +00:00

... 7 8 9 10 11 ...

10578 commits