Commit graph

25991 commits

Author SHA1 Message Date
Hauke Mehrtens
c48f285147 brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38979
2013-12-01 18:05:08 +00:00
Hauke Mehrtens
cbbfc5f1e6 brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
This sets both values to the OpenWrt default values. There is no reason
to use some brcm47xx specific values here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38978
2013-12-01 17:34:27 +00:00
Hauke Mehrtens
23cd074371 mac80211: b43: improve PCIe host controller workaround
This is only needed by BCM4716 and not by BCM4706, I haven't seen any
problems there. Adds the write flush for some more parts where the phy
control regs are written.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38977
2013-12-01 17:23:19 +00:00
Hauke Mehrtens
c61b38dacb mac80211: remove DMI_EXACT_MATCH
DMI_EXACT_MATCH was added to the kernel in version 3.10.21 and collides
with backports version. DMI_EXACT_MATCH is only used by the intel GPU
driver which is not build by OpenWrt, so remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38976
2013-12-01 17:20:32 +00:00
Hauke Mehrtens
3fb7e8b851 brcm47xx: add vectored interrupts
This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38975
2013-12-01 16:37:58 +00:00
Hauke Mehrtens
25ca004f24 brcm47xx: add cpu overwrites
bcm47xx misses cpu overwrites for the features of the CPUs used in
these SoCs.
Instead of manually checking, it is now known at compile time for some
options and the compiler is able to remove the checks and optimize the
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38974
2013-12-01 16:36:38 +00:00
Hauke Mehrtens
d7ebbd0ac7 brcm47xx: use "firmware" partition name
Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:

commit 03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date:   Sat Apr 6 22:22:26 2013 +0000

    brcm47xx: use old partition names again for kernel 3.8

    This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

    Thank you russell for spotting this problem.

I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.

This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 38973
2013-12-01 16:32:32 +00:00
Gabor Juhos
f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Luka Perkov
f51d78f4f2 ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38971
2013-11-30 19:48:05 +00:00
Gabor Juhos
9c4c620a11 kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38970
2013-11-30 18:31:10 +00:00
Gabor Juhos
e629881e2d ar71xx: update Userspace support for the WA850/WA750
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38969
2013-11-30 18:31:08 +00:00
Gabor Juhos
6688857d39 ar71xx: Update profile for the wa750/wa850 to include rssileds by default
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38968
2013-11-30 18:31:06 +00:00
Gabor Juhos
6ad568902e ar71xx: use cybertan_check_image for image verification on the WRT160NL
That function provides a slightly improved sanity check than the
currently used solution.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38967
2013-11-30 18:31:04 +00:00
Gabor Juhos
1fa75d430a ar71xx: sysupgrade for My Net Wi-Fi Range Extender
This patch enables the convenient sysupgrade feature for
WD's Wi-Fi Range Extender.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4341/
[juhosg:
  - rename 'mynet_rext_check_image' function to 'cybertan_check_image'
    and move that into platform.sh,
  - remove the the model specific 'platform_do_upgrade_mynet_rext' function,
  - drop the mynet-rext.sh script,
  - remove the image/Makefile change,
  - update commit message]
[christian:
  - check all 8 bytes of the firmware/device magic]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38966
2013-11-30 18:31:03 +00:00
Gabor Juhos
3674062469 ar71xx: image: unify CyberTAN macros
Make the Image/Build/CyberTAN macro more generic,
and use simple wrappers for the GZIP/LZMA variants.
This simplifies the Makefile a bit, and allows to
build sysupgrade images for the devices which are
using LZMA compressed uImages.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38965
2013-11-30 18:31:01 +00:00
Gabor Juhos
cb67115b4c ar71xx: image: fix CyberTAN sysupgrade images
In the current sysupgrade images, the CRC32 value of
the TRX header covers the whole rootfs data. Due to
this, the CRC value should be changed during sysupgrade
otherwise the bootloader refuses to load the image on
the next boot.

Change the image generation to create sysupgrade images
where the CRC32 value covers the kernel data only. This
allows to skip the 'fixtrx' step during sysupgrade on
the target.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38964
2013-11-30 18:30:59 +00:00
Gabor Juhos
fd8e5b04b4 firmware-utils/trx: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38963
2013-11-30 18:30:57 +00:00
Gabor Juhos
b61b447472 firmware-utils/trx: fix two bugs
- fix crc32 calculation if -F was enabled.

 - don't convert the crc32 to little endian twice.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 38962
2013-11-30 18:30:56 +00:00
John Crispin
2370126b9b ramips: Fix initial network configuration for few boards
Argus ATP52B:      ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645:     seems to be a redundant case

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38960
2013-11-30 08:36:56 +00:00
John Crispin
f8fe6a090a ramips: Fix dts typos
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38959
2013-11-30 08:36:47 +00:00
Gabor Juhos
a6ecce827a ar71xx: build image for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38958
2013-11-29 20:51:16 +00:00
Gabor Juhos
4069a50de6 firmware-utils/mkplinkfw: add TL-WR1043ND v2 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38957
2013-11-29 20:51:15 +00:00
Gabor Juhos
7db7757bf2 ar71xx: add user-space support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38956
2013-11-29 20:51:13 +00:00
Gabor Juhos
bc2d7b8193 ar71xx: add kernel support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38955
2013-11-29 20:51:12 +00:00
Gabor Juhos
fd892350c2 ar71xx: add profile and build image for the Sitecom WLR-8100
- partitions on factory fw are a bit strange
  - unknown contained some strings in factory
  - unknown2 contains some atheros (2nd art ?)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4149/
[juhosg: edit commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38954
2013-11-29 20:18:50 +00:00
Gabor Juhos
a0ad2a0f86 ar71xx: fix switch port map for the Sitecom WLR-8100
There was no way to determine a working config, because
the switch (ar8337) was not working previously.

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4470/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38953
2013-11-29 20:18:49 +00:00
Gabor Juhos
c378d5e953 generic: ar8216: add AR8337N switch support
This patch is needed to use the switch inside the Sitecom WLR-8100;
it was unusable and detected as Generic-Phy before.

since ar8337 is behaving like ar8327
generally do the same thing
see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218
forward-ported to trunk

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4469/
[juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38952
2013-11-29 20:18:48 +00:00
Gabor Juhos
74a353f64f generic: ar8216: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38951
2013-11-29 20:18:46 +00:00
Gabor Juhos
c1fb0e5e39 ar71xx: rssi leds for My Net WiFi Range Extender
The device has three extra LEDs which indicate the quality
of the wireless link. Thanks to rssileds, this feature now
works out of the box.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4462/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38950
2013-11-29 20:18:45 +00:00
Gabor Juhos
981e3b354a ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably.

1. The wifi didn't work in the initial release. This was because
the WMAC of the AR9340 is not connected to the antennas.
(However, it can pick up wifi signals, if they are strong enough!)
Instead there's a dedicated AR9300 chip on the same board, which
works.

2. Ethernet throughput is improved. iperf shows that the hardware
can sustain more than 200Mbit/s and no longer drops any packages
when the link is under load.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4461/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38949
2013-11-29 20:18:44 +00:00
Gabor Juhos
1167f92ac6 ag71xx: add F1E specific feature bit definitions to AR934X register file
The F1E Phy (AR8035?) requires additional bits to be
set in order to provide a fast and reliable connection
over gigabit links.

When enabled, the link doesn't suffer anymore from a small
package loss under load and the performance is improved
quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4460/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38948
2013-11-29 20:18:43 +00:00
Gabor Juhos
cad5257732 ar71xx: user space support update tl-wr842n_v2 add default led support
Small update to uci_defaults/01_leds, to support the usb led

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38947
2013-11-29 20:18:42 +00:00
Gabor Juhos
af4873e41c ar71xx: Kernel support update tl-wr842n_v2 added missing usb led
Just a small oversight my part, added the support for the USB led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38946
2013-11-29 20:18:40 +00:00
Imre Kaloz
f6b57149af FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38943
2013-11-29 10:59:51 +00:00
Imre Kaloz
08a62d8d8a tunr on some additional features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38942
2013-11-29 10:58:40 +00:00
Imre Kaloz
7429c46214 ignore the fpu if we're doing soft-float
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38941
2013-11-29 10:44:04 +00:00
Imre Kaloz
5de876bc78 there's no such thing as a soft fpu, this target should be fine without these
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38940
2013-11-29 10:25:43 +00:00
Imre Kaloz
ad2cd7878c enable using soft-float regardless of having a fpu
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38939
2013-11-29 09:24:07 +00:00
Jo-Philipp Wich
1029d341c5 ubox: fix handling of uci lists, prevent shell code injection from uci values (#14548)
SVN-Revision: 38938
2013-11-28 20:47:26 +00:00
Jo-Philipp Wich
cdbff3641b Revert "ubox: the validation code has problems with the "(" char. use string for now"
This reverts commit f7c2ac3ea9b5f2dc4ef4ce4ef195de8a4ac5546b.

SVN-Revision: 38937
2013-11-28 11:33:49 +00:00
Jo-Philipp Wich
1527f96ca6 busybox: do not abort sysntpd init if enable_server is unset, that variable just controls the server part for relaying NTP
SVN-Revision: 38936
2013-11-28 11:28:40 +00:00
Jo-Philipp Wich
387761e2fc procd: fix processing of datatype specification with spaces
SVN-Revision: 38935
2013-11-28 11:26:34 +00:00
Imre Kaloz
8adb3fb74d initialize wl12xx from the device tree
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38934
2013-11-27 12:51:35 +00:00
Imre Kaloz
9a0d644f9e add device tree based initialization to wl12xx
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38933
2013-11-27 12:40:07 +00:00
Imre Kaloz
dcae3ef009 refresh/rename patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38932
2013-11-27 12:34:41 +00:00
Imre Kaloz
cf8a186553 fix gpio interrupt-cells property on AM335x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38931
2013-11-27 12:33:06 +00:00
Imre Kaloz
c7d102816c refresh patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38930
2013-11-27 12:31:05 +00:00
Imre Kaloz
9100d559b5 make the wl12xx glue code available with compat-wireless, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38929
2013-11-27 12:29:13 +00:00
Imre Kaloz
412b772e24 add TI wireless symbols and enable the platform glue by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38928
2013-11-27 12:25:20 +00:00
Felix Fietkau
4e6043e691 mac80211: include 802.11n support when wl12xx is selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38927
2013-11-27 12:08:38 +00:00