openwrtv4

No description

Find a file

Gabor Juhos 981e3b354a ar71xx: improve support for the My Net Wi-Fi Range Extender device This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38949		2013-11-29 20:18:44 +00:00
config	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00
package	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00
scripts	add a feature flag for device tree support	2013-11-22 12:01:01 +00:00
target	ar71xx: improve support for the My Net Wi-Fi Range Extender device	2013-11-29 20:18:44 +00:00
toolchain	enable using soft-float regardless of having a fpu	2013-11-29 09:24:07 +00:00
tools	tools/mpfr: add GNU source	2013-11-25 14:09:24 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org