Commit graph

32 commits

Author SHA1 Message Date
Pavel Kubelun
6ebb46a40a ipq806x: fix pvs1_bin voltage in ipq8065 DT
Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK.

Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table.

Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has
correct values in DT, but in future a new device may choose n1 or n6.

Without this change n1 is semi-correct and n6 is not available, because OPP driver
disregards bins with voltage values that regulator cannot supply.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-10 08:11:14 +01:00
dissent1
fef6a96d9e ipq806x: add thermal sensor driver
Allows to check cpu temperature.

Huge thanks to @hnyman for valuable assistance!

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-12-01 15:47:43 +01:00
Mathias Kresin
3228c2a682 ipq806x: more dts cleanup
Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this
GPIO is mentioned in the GPL tarball, it doesn't do anything. The
2.4/5 GHz LEDs are connected to the wifi chips and not be controlled
from the the userspace.

Use the LEDs names/colours as they are used in the board manuals. Merge
redundant LED configurations. Use the phy[0|1]tpt trigger for the
wireless LEDs. Remove the workarounds for the not controllable wireless
LEDs.

Fix spi compatible strings and remove superfluous spi-max-frequency
parameters.

If there are two power leds, use one for indicating normal operation and
one for failsafe/upgrade. Keep the on/off state of the main power led
during boot.

Use the usb pinmux settings from the nbg6817 gpl sources.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-27 15:33:54 +01:00
Henryk Heisig
e3caadc69d ipq806x: clean up dts files
Set the pinmux to the values found in the GPL tarballs of the boards.
Remove pinmux which are is not used (like nand pinmux for spi
flash boards).

This allows to use the wan orange led of the C2600 which had a wrong
pinmux before. Might fix buttons or leds of other boards as well.

Fix the LED color and the ledswitch key code of the C2600. Rename the
ledgnr to ledswitch.

Add support for indication the boot state using LEDs to the D7800,
NBG6817, R7500 and R7500v2.

Change GPIO active to readable values in D7800, EA8500, R7500,
R7500v2 and R7800.

Change gpioexport to gpio pinmux.

Add proper "drive strenght" to i2c4_pins and use it for RPM on
C2600, D7800, EA8500, R7500, R7500v2.

Remove pcie pinmux from D7800.

Move pinctrl to correct place in NBG6817 and R7800.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-11-27 15:24:59 +01:00
Sebastian Quilitz
ae79c41286 ipq806x: add support for TP-Link Archer VR2600v
This router is similar to the C2600. Ethernet on WAN + LAN, switch,
sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem
and the POTS/DECT interface are not supported yet.

It is not possible to flash LEDE via the TP-Link webinterface. The
image need to be signed. The first 0x200 bytes of the image is the
TP-Link header including the signature. The signature is not validated
by the bootloader. The LEDE image is zeroed in this area.

To install LEDE it is necessary to solder a four pin header to JP2.
Connect a serial interface to this header and interrupt the autostart
of kernel. Transfer the sysupgrade image via TFTP and write it to the
serial flash at 0x320000.

Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
2016-11-24 22:37:40 +01:00
Pavel Kubelun
70434c3f94 ipq806x: switch to upstream usb driver and backport fixes
Also removing fifo-resize property drom DT as it has been removed from the driver.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-21 09:58:42 +01:00
Pavel Kubelun
5aace5a5fb ipq806x: fixes for R7800 and C2600
Updating spi pins configuration in R7800 and C2600 DTs
Adding more usb power pin export and gsbi6 in R7800 DT
Updating and fixing leds

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
3ac5eb9141 ipq806x: fix Netgear R7500v2 memory
Netgear R7500v2 has 512MB of RAM with 2MB reserved block in the end of memory region.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
bb8f5162fd ipq806x: fix pci pins
Fix pci pins drive-strength according to oem sources.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
84781cb6dc ipq806x: add vlans during switch init into R7800 DT
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
77b6bfc2f5 ipq806x: add support for RPM message RAM
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
dissent1
07d0c1b947 ipq806x: add support for RPM clock controller
The patch #179 for RPM has initially been made for apq806x board. It has been modified to support ipq806x instead of apq8064.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
506dc815b9 ipq806x: add CPU idle states
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-16 10:59:30 +01:00
Pavel Kubelun
524d7a7cde ipq806x: fix pcie reset gpios
Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-08 11:17:10 +01:00
Pavel Kubelun
b2135f3ba5 ipq806x: update DT in accordance to new drivers And add some more DT nodes
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
bf7166e545 ipq806x: fix leds, sata port for Netgear R7800 and minor fixes - renamed leds in correct color accordance - blink power led with white during boot and with amber when flashing firmware - fixed usb leds - enabled unused wps and rfkill leds as wlan leds. Now rfkill led is for 2.4GHz and wps - 5GHz WIFI - removed unneeded bootargs - removed unneeded pci pins from R7800 DT (driver already handles it in proper way) and add tx offsetting - nand ecc step size - fixed sata ports
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-11-03 08:28:16 +01:00
Pavel Kubelun
8f7e58c0fe ipq806x: add reserved memory node in Netgear R7800
KERNEL BUG: BAD_PAGE_STATE in process appears here and there during intensive memory usage.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-10-31 16:48:04 +01:00
Henryk Heisig
0744b6a044 ipq806x: ArcherC2600: export usb power pins
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:54 +01:00
Henryk Heisig
dbf2feb2b3 ipq806x: ArcherC2600: devictree cleanup
add blank lines and use macros for GPIOs

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-10-31 16:40:28 +01:00
André Valentin
a0ed7af6c6 ipq806x/nbg6817: add support for ZyXEL NBG6817
CPU: 2x1.8GHz ARM, RAM: 512MiB
Storage: 4MiB serial Flash, 3.9GiB MMC
NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports
WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO

For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin
to device. Then run:
cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4
cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5
reboot -f

For debugging serial console is easily visible on board, no soldering needed.

Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:46 +02:00
Henryk Heisig
bcfb535730 ipq806x: C2600: change leds colour name
Signed-off-by: Henryk Heisig hyniu@o2.pl
2016-10-15 11:36:50 +02:00
Henryk Heisig
4bdf615878 ipq806x: add support for indicating the boot and upgrade state using four leds
Signed-off-by: Henryk Heisig hyniu@o2.pl
2016-10-15 11:36:50 +02:00
dissent1
eb7307cb94 ipq806x: update Netgear R7800 device tree
-add spi pins
-move mdio and rgmii pinctrl from gmac and mdio into pinmux node
-add i2c4 pinctrl into rpm node
-add pin details into several nodes
-update gmac1 and gmac2 parameters
-update mdio phy0 and phy4 registers by ddwrt devs findings
-fix i2c4 pin drive-strengh
-remove pcie pins as it's already present in ipq8065 DT

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-09-30 10:15:23 +02:00
Cezary Jackiewicz
9417293366 ipq806x: Archer C2600: Renaming LED accordance with the standard
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
2016-08-24 00:21:34 +02:00
Jo-Philipp Wich
00e8571f2b ipq806x: rename R7800 device tree file, merge R7500v2 dts addition
The R7800 is an IPQ8065, so rename its dts file to reflect that fact.
Also fold the R7500v2 dts addition into the existing 800-devicetree.patch.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-24 02:30:35 +02:00
Alexis Green
c34f953fef ipq806x: Build image for Netgear Nighthawk X4 R7500v2
Signed-off-by: Alexis Green <alexis@cessp.it>
[Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-22 17:24:48 +02:00
John Crispin
00516611bd ipq806x: add usb pins to r7800 dts file
Signed-off-by: John Crispin <john@phrozen.org>
2016-08-22 07:43:11 +02:00
dissent1
f3fbc80718 ipq806x: fix MAC_POWER_SEL for Netgear R7800
Fixes instability/corruption on the ethernet interface connected to port0 on the switch on Netgear R7800 as well.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-07-26 08:39:36 +02:00
Pavel Kubelun
823242185b ipq806x: add initial support for Netgear R7800
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-22 19:32:06 +02:00
Josh Bendavid
66ffd0ddf9 ipq806x: fix MAC_POWER_SEL switch configuration
Fixes instability/corruption on the ethernet interface connected to port0 on the switch.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-06-20 11:45:44 +02:00
Adrian Panella
0ddcbee261 ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-17 04:13:07 +02:00
John Crispin
8cc65914df ipq806x: move dts file to the files folder
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00