KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ipq806x: more dts cleanup

Browse source 
Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this
GPIO is mentioned in the GPL tarball, it doesn't do anything. The
2.4/5 GHz LEDs are connected to the wifi chips and not be controlled
from the the userspace.

Use the LEDs names/colours as they are used in the board manuals. Merge
redundant LED configurations. Use the phy[0|1]tpt trigger for the
wireless LEDs. Remove the workarounds for the not controllable wireless
LEDs.

Fix spi compatible strings and remove superfluous spi-max-frequency
parameters.

If there are two power leds, use one for indicating normal operation and
one for failsafe/upgrade. Keep the on/off state of the main power led
during boot.

Use the usb pinmux settings from the nbg6817 gpl sources.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2016-11-26 10:20:03 +01:00
parent e3caadc69d
commit 3228c2a682
8 changed files with 85 additions and 115 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
target/linux/ipq806x/base-files/etc/board.d/01_leds
View file

@ -16,40 +16,26 @@ c2600)
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
ucidef_set_led_default "general" "general" "${board}:white:general" "1"
;;
d7800 |\
r7500 |\
r7500v2)
ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "1-1"
ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb3" "3-1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_ide "esata" "eSATA" "${board}:amber:esata"
ucidef_set_led_default "wps" "WPS" "${board}:white:wps" "0"
ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0"
;;
r7500v2 |\
r7800)
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata"
ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt"
ucidef_set_led_wlan "rfkill" "rfkill" "${board}:white:rfkill" "phy1tpt"
;;
ea8500)
ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio"
ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0"
;;
nbg6817)
ucidef_set_led_wlan "wlan2g" "WLAN2g" "$board:amber:wifi" "phy1radio"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5" "phy0radio"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:amber:wifi2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5g" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
;;
vr2600v)
ucidef_set_led_usbport "usb" "USB" "${board}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0radio"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1radio"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1tpt"
ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
;;
*)

11
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View file

@ -150,7 +150,6 @@
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -474,18 +473,18 @@
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_red {
label = "c2600:orange:wan";
wan_amber {
label = "c2600:amber:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_blue {
wan_white {
label = "c2600:white:wan";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
};
power: status {
label = "c2600:white:status";
power: power {
label = "c2600:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};

39
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
View file

@ -25,10 +25,10 @@
serial0 = &uart4;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
@ -59,7 +59,7 @@
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
@ -354,27 +354,27 @@
pinctrl-names = "default";
usb1 {
label = "d7800:amber:usb1";
label = "d7800:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "d7800:amber:usb3";
usb2 {
label = "d7800:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "d7800:amber:status";
power_amber: power_amber {
label = "d7800:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "d7800:white:internet";
wan_white {
label = "d7800:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "d7800:white:wan";
wan_amber {
label = "d7800:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
@ -388,21 +388,16 @@
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power: power {
power_white: power_white {
label = "d7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rfkill {
label = "d7800:white:rfkill";
wifi {
label = "d7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wifi5g {
label = "d7800:white:wifi5g";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};

39
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
View file

@ -25,10 +25,10 @@
serial0 = &uart4;
mdio-gpio0 = &mdio0;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
led-boot = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
chosen {
@ -59,7 +59,7 @@
led_pins: led_pins {
mux {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
@ -321,27 +321,27 @@
pinctrl-names = "default";
usb1 {
label = "r7500:amber:usb1";
label = "r7500:white:usb1";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "r7500:amber:usb3";
usb2 {
label = "r7500:white:usb2";
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
};
status {
label = "r7500:amber:status";
power_amber: power_amber {
label = "r7500:amber:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
internet {
label = "r7500:white:internet";
wan_white {
label = "r7500:white:wan";
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "r7500:white:wan";
wan_amber {
label = "r7500:amber:wan";
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
};
@ -355,21 +355,16 @@
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
power: power {
power_white: power_white {
label = "r7500:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
rfkill {
label = "r7500:white:rfkill";
wifi {
label = "r7500:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
wifi5g {
label = "r7500:white:wifi5g";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};

4
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
View file

@ -404,8 +404,8 @@
default-state = "keep";
};
rfkill {
label = "r7500v2:white:rfkill";
wifi {
label = "r7500v2:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
};

2
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
View file

@ -129,7 +129,6 @@
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -401,6 +400,7 @@
power: power {
label = "vr2600v:white:power";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
phone {

60
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
View file

@ -58,19 +58,12 @@
};
led_pins: led_pins {
off {
pins = "gpio26", "gpio33", "gpio64";
mux {
pins = "gpio9", "gpio26", "gpio33", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
on {
pins = "gpio9";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
@ -117,39 +110,41 @@
};
usb0_pwr_en_pins: usb0_pwr_en_pins {
pwr {
pins = "gpio14";
mux {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-up;
output-high;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
pwr {
pins = "gpio17";
function = "gpio";
drive-strength = <12>;
bias-pull-down;
output-high;
};
ovc {
pins = "gpio16";
bias-pull-up;
};
};
usb1_pwr_en_pins: usb1_pwr_en_pins {
mux {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <12>;
bias-pull-up;
};
pwr {
pins = "gpio14";
bias-pull-down;
output-high;
};
ovc {
pins = "gpio15";
bias-pull-up;
};
};
};
@ -173,14 +168,14 @@
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl512s";
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
@ -371,17 +366,22 @@
power: power {
label = "nbg6817:white:power";
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
wifi {
label = "nbg6817:amber:wifi";
wifi2g {
label = "nbg6817:amber:wifi2g";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
};
/* wifi2g amber from the manual is missing */
wifi5g {
label = "nbg6817:amber:wifi5g";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
/* wifi5g amber from the manual is missing */
};
};

21
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View file

@ -31,7 +31,7 @@
mdio-gpio0 = &mdio0;
led-boot = &power_white;
led-failsafe = &power_white;
led-failsafe = &power_amber;
led-running = &power_white;
led-upgrade = &power_amber;
};
@ -62,7 +62,7 @@
led_pins: led_pins {
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
"gpio24","gpio26", "gpio53", "gpio64", "gpio67";
"gpio24","gpio26", "gpio53", "gpio64";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
@ -221,7 +221,7 @@
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -244,14 +244,14 @@
status = "ok";
spi6: spi@16580000 {
status = "ok";
spi-max-frequency = <6000000>;
pinctrl-0 = <&spi6_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
spi-nor@0 {
compatible = "spi-nor";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <6000000>;
};
@ -516,7 +516,7 @@
power_white: power_white {
label = "r7800:white:power";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "on";
default-state = "keep";
};
power_amber: power_amber {
@ -549,8 +549,8 @@
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
};
rfkill {
label = "r7800:white:rfkill";
wifi {
label = "r7800:white:wifi";
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
};
@ -558,11 +558,6 @@
label = "r7800:white:wps";
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "r7800:white:wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
};
};
};