openwrtv3/target/linux/ath79/dts
Daniel F. Dickinson 60cf71ede7 ath79: Forward port support for CR3000
The PowerCloud Systems CR3000 was a cloud-managed CPE for a now defunct
NaaS offering.  It was previously supported under the ar71xx branch and
this forward ports that support with some notable differences:

1) Since reverting to stock firmware is now irrelevant there is is only
a single openwrt image generated which uses the entire flash rather than
preserving PowerCloud-specific partitions that are unneeded to openwrt--
those partitions will be erased and used by the openwrt image.

2) Rather than use a non-standard probe order for the ethernet devices,
this image uses a set of 'ip link set ethX name ethY' commands very early
in preinit (before the network is used at all), in order to have the the
switch and Wan use the same ethernet names as in previous images.

3) /etc/config/wireless will need to be regenerated as the path to the
wireless device has changed due to differences in ath79 DT for ar93x
compared to ar71xx images.

4) eth0 is wan and eth1 is lan (switch)

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2018-08-01 11:23:53 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7100.dtsi ath79: relicense DTS files to the GPL 2.0+ / MIT 2018-05-07 10:31:35 +02:00
ar7161_netgear_wndr3800.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7240.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7240_netgear_wnr612-v2.dts ath79: add Netgear WNR612 v2 2018-06-26 07:05:30 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: ar7240: Update dts for current ag71xx driver 2018-07-30 10:43:35 +02:00
ar7240_on_n150r.dts ath79: add support for ON Networks N150R 2018-06-26 07:05:44 +02:00
ar7240_tl-wr740n-v2.dts ath79: ar7240: Update dts for current ag71xx driver 2018-07-30 10:43:35 +02:00
ar7241.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7241_tl-mr3x20.dtsi ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3220-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3420-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-wr841-v7.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tp-link.dtsi ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_bullet-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_nano-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_rocket-m.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_unifi.dts ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7241_ubnt_xm.dtsi ath79: ar7241: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
ar7242.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar7242_avm_fritz300e.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_tl-wr2543-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9132.dtsi ath79: correct wmac names in dts 2018-06-01 08:23:47 +02:00
ar9132_tl-wr1043nd-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9330.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
ar9330_glinet_ar150.dts ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_dpt_module.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_dragino_ms14.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_embeddedwireless_dorin.dts ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9331_etactica-eg200.dts ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9331_omega.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-mr10u.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-mr3020-v1.dts ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9331_tl-wr703n.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-wr703n_tl-mr10u.dtsi ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9331_tl-wr740nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dtsi ath79: ar933x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9341_pcs_cr3000.dts ath79: Forward port support for CR3000 2018-08-01 11:23:53 +02:00
ar9344.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar9344_ocedo_raccoon.dts ath79: fix OCEDO Raccoon 2018-07-25 08:59:33 +02:00
ar9344_pcs_cap324.dts ath79: Port PowerCloud Systems CAP324 support 2018-07-30 10:43:31 +02:00
ar9344_pcs_cr5000.dts ath79: Port PowerCloud Systems CR5000 support 2018-07-30 10:43:31 +02:00
ar9344_tl-wdr3600.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ath79.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
qca956x.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
qca9533.dtsi ath79: Add switch reset definition in dts 2018-07-30 10:43:35 +02:00
qca9533_glinet_ar300m.dtsi ath79: qca953x: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
qca9533_glinet_ar300m_nand.dts ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
qca9533_glinet_ar300m_nor.dts ath79: initial gl-ar300m support 2018-06-18 20:29:38 +02:00
qca9533_tl-wr841-v9.dts ath79: add support for tl-wr841n-v9 2018-07-30 16:14:49 +02:00
qca9533_tl-wr841.dtsi ath79: add support for tl-wr841n-v9 2018-07-30 16:14:49 +02:00
qca9557.dtsi ath79: qca955x: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9558_tl-archer-c7-v2.dts ath79: Fix support for TP-LINK Archer C7 v2 2018-07-30 10:43:34 +02:00
qca9558_tl-archer-c7.dtsi ath79: Fix support for TP-LINK Archer C7 v2 2018-07-30 10:43:34 +02:00
qca9558_tl-wr1043nd-v2.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd-v3.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9563_phicomm-k2t.dts ath79: add support for Phicomm K2T 2018-06-18 18:21:16 +02:00
qca9563_tl-re450-v2.dts ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
qca9563_tl-wr1043n.dtsi ath79: qca956x: Update dts for current ag71xx driver 2018-07-30 10:43:34 +02:00
qca9563_tl-wr1043nd-v4.dts ath79: small wr1043nd-v4 fixes 2018-06-28 20:31:03 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: remove bs-partition ro-flag for UniFi AC devices 2018-07-04 01:20:03 +02:00