KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ath79: Fix support for TP-LINK Archer C7 v2

Browse source 
Remove mdio1 and phy1 handle. AR8327N is controlled through mdio0.
Add gmac-config for Archer C7.
Remove ucidef_set_interfaces_lan_wan. They can be determined by config_generate automatically.

The following are for adding support for WDR4900 v2/Archer C7 v1 and other
devices that shared the same machine file in ar71xx:
Move mtd partitions to archer-c7-v2.dts. Only Archer C7 v2 has 16M flash.
Flash on Archer C7 v1/TL-WDR4900 v2 is 8M.
Add label for wlan leds. The default trigger for archer c7/wdr4900 is different.
Move wlan5g led to archer-c7-v2.dts. 5G led on WDR4900 is connected to ar9380.
Move rfkill definition to archer-c7-v2.dts. There is no such a button on wdr4900 v2.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
This commit is contained in:
Chuanhong Guo 2018-07-17 17:09:14 +08:00 committed by John Crispin
parent 18db385eb7
commit b6c8e5deae
3 changed files with 41 additions and 46 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
target/linux/ath79/base-files/etc/board.d/02_network
View file

@ -50,7 +50,6 @@ ath79_setup_interfaces()
;;
"tplink,tl-archer-c7-v2")
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;

34
target/linux/ath79/dts/qca9558_tl-archer-c7-v2.dts
View file

@ -11,6 +11,36 @@
model = "TP-Link Archer C7 Version 2";
};
&rfkill {
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
&gpio_keys {
rfkill {
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
&gpio_leds {
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
&mtdparts {
uboot: u-boot@0 {
reg = <0x000000 0x020000>;
read-only;
};
firmware@20000 {
reg = <0x020000 0xfd0000>;
};
art: art@ff0000 {
reg = <0xff0000 0x010000>;
read-only;
};
};

52
target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
View file

@ -15,7 +15,7 @@
led-status = &system;
};
leds {
gpio_leds: leds {
compatible = "gpio-leds";
system: system {
@ -40,7 +40,7 @@
linux,default-trigger = "usbport";
};
wlan2g {
led_wlan2g: wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
@ -52,16 +52,9 @@
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
keys {
gpio_keys: keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
@ -72,12 +65,6 @@
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill: wifi {
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
gpio-export {
@ -148,27 +135,10 @@
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
mtdparts: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xfd0000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
@ -192,27 +162,23 @@
};
};
&mdio1 {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy1>;
fixed-link {
speed = <1000>;