openwrtv3

Author	SHA1	Message	Date
Hauke Mehrtens	f8d55e7541	brcm47xx: use b53 phy driver for the switch in kernel 3.10 This makes it possible to use swconfig to controll the switch. This was tested with devices using b43 and bgmac. This was not tested on devices using tg3. This does not support the adm switch used in some very old devices. SVN-Revision: 37304	2013-07-14 14:11:17 +00:00
Felix Fietkau	936683b2de	ar71xx: use uimage split for WHR-HP-G300N Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37303	2013-07-14 14:06:01 +00:00
Felix Fietkau	342946d858	ar71xx: use uimage split for dlrtdev Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37302	2013-07-14 14:05:57 +00:00
Felix Fietkau	594797cdd5	ar71xx: use uimage split for Allnet devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37301	2013-07-14 14:05:53 +00:00
Felix Fietkau	e5b7a20bea	ar71xx: use uimage split for Cameo devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37300	2013-07-14 14:05:50 +00:00
Felix Fietkau	4fc17e4d08	ar71xx: use uimage split for DIR-825B1 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37299	2013-07-14 14:05:46 +00:00
Felix Fietkau	c263993197	ar71xx: use uimage split for Embedded Wireless Dorin Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37298	2013-07-14 14:05:42 +00:00
Felix Fietkau	083b0a06a3	ar71xx: use uimage split for Ubiquiti XM devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37297	2013-07-14 14:05:39 +00:00
Felix Fietkau	6702955857	ar71xx: increase kernel size for wndr3700 based devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37296	2013-07-14 14:05:35 +00:00
Felix Fietkau	25d910a78f	ar71xx: use uimage split for WZR-HP-G300NH2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37295	2013-07-14 14:05:31 +00:00
Felix Fietkau	6bff456212	ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37294	2013-07-14 14:05:27 +00:00
Felix Fietkau	fbde376c53	ar71xx: use uimage split for WZR-HP-G300NH Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37293	2013-07-14 14:05:23 +00:00
Felix Fietkau	a7c5f6708b	ar71xx: use uimage split for WZR-HP-G450H Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37292	2013-07-14 14:05:19 +00:00
Felix Fietkau	ab5e21a9a5	ar71xx: enable uimage split and use it for carambola2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37291	2013-07-14 14:05:16 +00:00
Felix Fietkau	8d5d96e833	ar71xx: remove linux 3.8 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37290	2013-07-14 14:05:12 +00:00
Felix Fietkau	d1238718c2	ar71xx: move the watchdog driver to the kernel Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37289	2013-07-14 14:05:08 +00:00
Felix Fietkau	8cf868e1a6	ar71xx: set linux 3.10 as default Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37288	2013-07-14 14:05:04 +00:00
Hauke Mehrtens	a5c0ad6354	brcm47xx: add initial support for kernel 3.10 SVN-Revision: 37287	2013-07-14 13:44:45 +00:00
Hauke Mehrtens	3bc90a4d23	brcm47xx: fix switch handling This fixes some problems with the switch handling * It now send the messages again to indicate a button for failsafe mode should be pressed * it does not leak packages between wan and lan any more * the switch works again in normal mode The Ethernet connection has to be up when the switch driver switch-robo is insmoded therefor we just do it again. Explicitly set enable_vlan to prevent leaking packages. This should close #13869, #13868 and #13716 SVN-Revision: 37286	2013-07-14 13:19:58 +00:00
Felix Fietkau	17bbc92882	kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848 ) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37285	2013-07-14 13:10:22 +00:00
Hauke Mehrtens	ef0b9be95e	brcm47xx: do not load the kernel modules needed for Ethernet manually add the boot flag to make the kernel modules needed for Ethernet and diag load on startup. SVN-Revision: 37284	2013-07-14 12:59:00 +00:00
Felix Fietkau	656d475043	kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37283	2013-07-14 12:57:03 +00:00
Felix Fietkau	b95bdc8ab5	kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37282	2013-07-14 12:56:58 +00:00
Hauke Mehrtens	e800436de3	brcm47xx: do not change nvram without user interaction SVN-Revision: 37281	2013-07-14 12:56:42 +00:00
Hauke Mehrtens	da72edd7cd	kernel: refresh patches for kernel 3.8.13 SVN-Revision: 37276	2013-07-13 22:45:56 +00:00
Hauke Mehrtens	06accca1d7	kernel: update to kernel 3.10.1 and refresh patches SVN-Revision: 37275	2013-07-13 22:45:09 +00:00
Hauke Mehrtens	e574f75d16	kernel: update to kernel 3.9.10 and refresh patches SVN-Revision: 37274	2013-07-13 22:43:10 +00:00
Felix Fietkau	9b9c6facfc	ar71xx: fix ar933x watchdog clock (#13866 ) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37273	2013-07-13 22:29:53 +00:00
Hauke Mehrtens	e041d370a7	brcm47xx: proc gets mounted without this patch SVN-Revision: 37272	2013-07-13 21:42:19 +00:00
Hauke Mehrtens	8dabd7a26b	brcm47xx: remove obsolete hotplug stuff SVN-Revision: 37271	2013-07-13 20:38:33 +00:00
Hauke Mehrtens	9e9261a718	bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs This was only tested on a Netgear R6250, but it could also work on other devices when the correct images are generated. It is only possible to boot into a ram disk, no Ethernet, Wifi, flash, USB is supported. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37268	2013-07-12 13:46:27 +00:00
John Crispin	39531131a9	ar71xx: add carambola2 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37260	2013-07-11 21:16:53 +00:00
John Crispin	93c4359512	lantiq: revert 36778 as it breaks irq assignment to pci devices Reported-by: Matti Laakso Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37258	2013-07-11 21:16:34 +00:00
Felix Fietkau	4932368398	kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37255	2013-07-11 20:56:27 +00:00
Felix Fietkau	19e3ec0570	kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37253	2013-07-11 20:56:19 +00:00
Felix Fietkau	f5ae93e941	kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37252	2013-07-11 20:56:15 +00:00
John Crispin	2d854d022c	ar71xx: set priority of ath79_wdt to 1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37251	2013-07-11 17:01:08 +00:00
Florian Fainelli	8149689393	ar71xx: fix TPLINK/TPLINKOLD initramfs images typos Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37237	2013-07-10 21:28:34 +00:00
Florian Fainelli	01865ae1cf	brcm2708: drop support for 3.3 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37236	2013-07-10 19:43:11 +00:00
Florian Fainelli	110687b491	brcm2708: package the i2c master driver module Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37235	2013-07-10 19:43:07 +00:00
Florian Fainelli	c263d5725b	brcm2708: package the SPI master controller driver Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37234	2013-07-10 19:43:02 +00:00
Florian Fainelli	7fb9279359	kernel: add a bunch of missing LCD Kconfig options Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37233	2013-07-10 19:42:58 +00:00
Florian Fainelli	f2ff0e9259	brcm2708: package the HW random module Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37232	2013-07-10 19:42:53 +00:00
Florian Fainelli	9e40952c92	ar71xx: fix Netgear initramfs images Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37230	2013-07-10 17:18:03 +00:00
Florian Fainelli	399283f875	ar71xx: fix some more issues with initramfs images Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37229	2013-07-10 15:22:47 +00:00
Felix Fietkau	eb2e09c5e9	ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37223	2013-07-10 11:33:43 +00:00
Florian Fainelli	44d22771ae	brcm2708: update maintainership Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37220	2013-07-09 20:53:13 +00:00
Florian Fainelli	15da5cfcdb	brcm2708: switch to 3.10 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37219	2013-07-09 20:53:08 +00:00
Florian Fainelli	de69c9edb0	brcm2708: add support for 3.10 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37218	2013-07-09 20:52:49 +00:00
Florian Fainelli	818d2603ee	kernel: add missing configuration symbols used on ARM platforms Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37217	2013-07-09 20:52:23 +00:00
Florian Fainelli	0b55984e1d	kernel: update PATCHES with a stricter policy Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37216	2013-07-09 20:52:07 +00:00
Felix Fietkau	64dde7d981	ar71xx: add linux 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37214	2013-07-09 12:52:18 +00:00
Felix Fietkau	4b5c5934e1	kernel: debloat the lzma compress/decompress code some more Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37211	2013-07-09 12:52:04 +00:00
Felix Fietkau	51b1e8577c	kernel: do not accept sysrq characters via serial port many boards have a disconnected TTL level serial which can generate some garbage that can lead to spurious false sysrq detects. Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37210	2013-07-09 12:52:00 +00:00
Jonas Gorski	c183dbc542	kernel: add missing config symbol Should fix buildbot builds of ixp4xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37208	2013-07-09 07:51:09 +00:00
Zoltan Herpai	7d4c120557	imx23: add gpio_sysfs support Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37207	2013-07-08 23:08:26 +00:00
John Crispin	099188695a	ralink: vlan offloading is causing problems. disable it Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37203	2013-07-08 16:34:52 +00:00
John Crispin	a6091a5c71	ralink: unbreak ralink i2c support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37202	2013-07-08 09:01:57 +00:00
John Crispin	a154693bab	ralink: add i2c-ralink kmod info Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37200	2013-07-08 09:01:47 +00:00
Gabor Juhos	e194a31500	linux: refresh kernel configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37195	2013-07-08 08:40:22 +00:00
Gabor Juhos	e61a77a05c	ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2 It also fixes USB Power on MR3420v2. Signed-off-by: Dmytro <dioptimizer@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37194	2013-07-08 08:40:21 +00:00
Gabor Juhos	446a962481	ar71xx: fix partition layout on Netgear WNDAP360 Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37193	2013-07-08 08:40:20 +00:00
Gabor Juhos	ca02639d17	ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360 Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37192	2013-07-08 08:40:18 +00:00
Luka Perkov	9de461f202	lantiq: etop enable gbit port0 Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37191	2013-07-08 07:11:59 +00:00
Felix Fietkau	dbb2feb87d	kernel: disable zisofs and zlib by default, reduces kernel size after lzma by ~10k Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37187	2013-07-06 14:49:24 +00:00
Felix Fietkau	bb0d563919	imx23: fix kernel module dependencies Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37181	2013-07-06 14:48:56 +00:00
Luka Perkov	1a3ad5a037	lantiq: add device tree support for arv4519pw Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37178	2013-07-05 07:44:42 +00:00
Luka Perkov	ecfb0c6de6	ar71xx: merge patches [611-,621-] into 610-* Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37176	2013-07-04 23:31:39 +00:00
Zoltan Herpai	de17203c85	imx23: bump kernel to 3.10 - fix BOARDNAME - add profile for Olinuxino boards - prep image Makefile for u-boot inclusion, separate out bootlet build - update kernel config to reflect updated chipidea requirements - update rtc/watchdog config Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37175	2013-07-04 22:25:26 +00:00
Zoltan Herpai	2a8630394d	kernel/generic: add missing regulator symbols for 3.10 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37169	2013-07-04 16:58:22 +00:00
Luka Perkov	1f546910cb	ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37167	2013-07-04 13:45:29 +00:00
John Crispin	2da37a713e	ramips: fix RT-N13U gpio buttons https://dev.openwrt.org/ticket/13795 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37163	2013-07-04 13:31:23 +00:00
John Crispin	541bede918	brcm47xx: fix module insert order https://dev.openwrt.org/ticket/13811 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37161	2013-07-04 13:31:13 +00:00
Luka Perkov	7b6e3df6ab	ar71xx: $(KDIR_TMP) must be present before starting initramfs build Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37155	2013-07-04 12:48:52 +00:00
Jonas Gorski	fb81a9b5ed	ixp4xx: replace magic number with macros in avila/ixdp425/miccpt PCI routing setup Replace magic number with the appropriate macro in avila/ixdp425/miccpt PCI routing setup. Signed-off-by: Tamas TEVESZ <ice@extreme.hu> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37154	2013-07-03 17:51:54 +00:00
Jonas Gorski	cdd6c5b750	ixp4xx: switch to kernel 3.10 Fixes network issues at least on NSLU2 (#13801). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37153	2013-07-03 17:51:44 +00:00
Luka Perkov	14b6674b39	lantiq: fix initramfs Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37143	2013-07-03 09:17:15 +00:00
Luka Perkov	62cb88f502	imx6: make kernel_oldconfig Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37134	2013-07-02 23:08:16 +00:00
Luka Perkov	c9926f77b4	ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type switch buttons should be declared as switch so the failsafe shell is not triggered by accident in procd Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37131	2013-07-02 10:45:32 +00:00
Florian Fainelli	c627ae768e	ar71xx: only invoke Initramfs building when enabled Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37129	2013-07-02 10:43:31 +00:00
John Crispin	fdfbac75c2	lantiq: xrx200_net compile fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37126	2013-07-02 09:34:45 +00:00
Jonas Gorski	87c0c2d81d	ixp4xx: add support for linux 3.10 Run tested on a NSLU2. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37124	2013-07-01 18:42:49 +00:00
Jonas Gorski	923a851ccf	kernel: add missing config symbol for 3.10 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37123	2013-07-01 18:42:39 +00:00
Florian Fainelli	460233fa2a	ar71xx: fix initramfs images generation after r37049 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37120	2013-07-01 15:37:25 +00:00
Jonas Gorski	96f8c15a36	kernel: update linux 3.10 to 3.10 final 3.10 final is out, so refresh patches and add md5sum. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37116	2013-07-01 13:21:06 +00:00
Felix Fietkau	5986a18c16	ramips: update wlan firmware hotplug script for new eeprom size Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37112	2013-06-30 21:03:48 +00:00
Jonas Gorski	0d9f760f27	kernel: update linux 3.9 to 3.9.8 Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103	2013-06-30 13:10:12 +00:00
Jonas Gorski	6a4e78dca6	brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds - Some fixes for the incorrect GPIO assignment of leds on Huawei HW556. - Addition of unassigned (LAN) leds which can be found on the back of the device. Signed-off-by: Angga Reza Fardana <angga@norture.com> Patchwork: http://patchwork.openwrt.org/patch/3744/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37102	2013-06-30 13:10:08 +00:00
Jonas Gorski	7d1cd9dfab	bcm63xx: Improve CFE version mod patch. Fix "cfe-" string length copy. Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f. Add support for Huawei CFE versions ("cfe-vd"). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3766/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37101	2013-06-30 13:10:05 +00:00
Jonas Gorski	6df83c3f89	bcm63xx: enable all SoCs for both subtargets Now that SMP kernels also work on older SoCs, also enable them for SMP. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37100	2013-06-30 13:10:03 +00:00
Jonas Gorski	e7d93889d7	bcm63xx: make smp kernels boot on older SoCs Enhance BMIPS support so SMP kernels work on older chips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37099	2013-06-30 13:10:00 +00:00
Jonas Gorski	66f8f30f47	bcm63xx: update patches Update patches with their upstream versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37098	2013-06-30 13:09:50 +00:00
John Crispin	124ef95f5f	lantiq: add v3.9 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37089	2013-06-29 18:16:56 +00:00
John Crispin	bfc7007226	lantiq: Add support for loading athxk eeproms through mtd This patch enables retrieving the wifi calibration data from an MTD partition. Try to copy mac address from ethernet before generating a random one. This fixes DGN3500 ath9k support. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 37087	2013-06-29 16:33:46 +00:00
John Crispin	fe8ecbd972	lantiq: fix kernel config for DEU support Trying to load the DEU modules results in unresolved symbols. This provides them. This requires the previous patch to be applied first. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 37086	2013-06-29 16:33:37 +00:00
John Crispin	b4f36358ff	lantiq: make xrx200 network driver use a tasklet for rx housekeeping Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37085	2013-06-29 16:33:28 +00:00
John Crispin	aff84655f5	lantiq: remove 3.7 kernel patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37084	2013-06-29 16:33:18 +00:00
John Crispin	6875316646	ramips: unbreak initramfs generation Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37080	2013-06-29 08:41:03 +00:00
Florian Fainelli	8ea5e19823	targets: fix remaining targets for initramfs builds Fix some bugs that slipped through while making initramfs non exclusive. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37079	2013-06-28 22:56:34 +00:00
Felix Fietkau	7acb84dde7	kernel: add global menuconfig option to enable kexec support Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37073	2013-06-28 11:27:20 +00:00
Felix Fietkau	900f78e3be	orion: disable normal router support for the harddisk subtarget Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37069	2013-06-28 11:27:06 +00:00
Felix Fietkau	059003fa90	orion: disable CONFIG_VM_EVENT_COUNTERS by default Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37068	2013-06-28 11:27:02 +00:00
Felix Fietkau	84ad1782f9	orion: dynamically generate /etc/config/network, the LaCie 2big Network does not use DSA Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37061	2013-06-28 11:26:37 +00:00
Felix Fietkau	6d6296e214	orion: add support for the lacie 2big network device Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37059	2013-06-28 11:26:29 +00:00
John Crispin	77b9fd52a6	ramips: fix ethernet driver make sure the driver does not crash under load Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37058	2013-06-28 11:22:11 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
John Crispin	36209234ab	ramips: fix rt2x00 ethernet compile bug Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37043	2013-06-27 16:45:40 +00:00
John Crispin	0d4e00c337	ramips: add missing symbols to rt288x config Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37042	2013-06-27 16:45:26 +00:00
John Crispin	1706c8d29a	ramips: fix ethernet stability issue introduced by recent kernel upgrade Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37041	2013-06-27 16:28:06 +00:00
Zoltan Herpai	e5c7a93d71	imx23: add new target for i.MX233-based boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37038	2013-06-27 10:12:03 +00:00
Zoltan Herpai	41ad05299c	kernel/generic: add missing regulator symbols for 3.9 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37036	2013-06-26 21:48:17 +00:00
Jonas Gorski	9a077f70de	bcm63xx: fix DSL-274xB F1 default network config Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37032	2013-06-24 20:35:54 +00:00
John Crispin	5063f712a6	ramips: move ESW reset to preinit on RT305x/RT5350 RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet interface, otherwise the driver will panic. As we already init the ethernet in preinit we therefor need to reset the switch before that. Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 37027	2013-06-24 12:39:28 +00:00
John Crispin	d3723f93c6	ramips: make rt3883 usb work properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37024	2013-06-24 12:06:56 +00:00
John Crispin	dca18caa79	ramips: revert gpio regulator dts update Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37021	2013-06-24 11:09:50 +00:00
John Crispin	55fb6f3a05	ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016	2013-06-23 15:50:49 +00:00
Felix Fietkau	3df61e8279	kernel: fix a reference counting bug in overlayfs Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37014	2013-06-22 14:00:12 +00:00
John Crispin	44b1688e6c	lantiq: Tune the XWAY subtarget cflags This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2. Although the Danube has a Mips 24KEc core performs well with the above cflags. Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> SVN-Revision: 37006	2013-06-21 16:54:15 +00:00
John Crispin	5d441ae7ea	lantiq: set mips16 support. Set mips16 support in XWAY subtarget. This patch is based in changeset #36600 Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37005	2013-06-21 16:54:07 +00:00
John Crispin	81c57ec131	lantiq: Fix ARV7518 DTS definitions Fix EBU leds by removing req2 and gnt2 from pinmux. Fix rfkill button gpio. Enable reset button. Fix power led activation status. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 37004	2013-06-21 16:54:03 +00:00
John Crispin	67f5f188b1	base-files: input/button drivers get loaded before preinit by procd Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000	2013-06-21 16:53:47 +00:00
John Crispin	e6ef318802	base-files: diag does not need to insmod any drivers, procd already did it for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999	2013-06-21 16:53:43 +00:00
John Crispin	39df8d1a45	brcm47xx: dont manually insmod switch drivers Signed-off-by: John Crispin <bloic@openwrt.org> SVN-Revision: 36993	2013-06-21 16:53:15 +00:00
John Crispin	2be717560a	ar71xx: drop procd_init console hack Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36992	2013-06-21 16:53:11 +00:00
Imre Kaloz	c228ed04a1	increase kernel partition size to fix boot issues SVN-Revision: 36982	2013-06-21 10:57:05 +00:00
Florian Fainelli	4ef56823e0	brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8 We currently used 16 DMA Ethernet channels, but the hardware only supports up to 8 (with 2 per enet and the remaining for USB slave). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36979	2013-06-20 18:47:36 +00:00
Felix Fietkau	2a5e1910d5	linux-3.8: backport a leds-gpio.c crash fix (fixes #13721 ) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36968	2013-06-18 22:23:38 +00:00
Florian Fainelli	28535aad38	brcm63xx: refresh 3.9 patches Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36958	2013-06-18 10:54:28 +00:00
Florian Fainelli	a9d4bdee43	brcm63xx: provide a default sane MAC address for Cable Modem devices Cable modem devices currently poke at some random location in RAM and may end up having an invalid MAC address which is not suitable. Provide a default one which is sane. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36957	2013-06-18 10:54:24 +00:00
Florian Fainelli	8ae2b1155d	brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954	2013-06-17 22:57:04 +00:00
Florian Fainelli	0ce75bc440	brcm63xx: simplify HCS image creation $(KDIR)/vmlinux is already a binary image, there is no need to create another one. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36949	2013-06-17 19:32:56 +00:00
Florian Fainelli	78a66975d6	brcm63xx: remove support for 3.8 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36948	2013-06-17 19:32:47 +00:00
Florian Fainelli	d2894412d8	brcm63xx: switch to 3.9 kernel Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36947	2013-06-17 19:32:42 +00:00
Florian Fainelli	f03bbaf065	brcm63xx: fix missing antislash in BCM6345 ethernet patch This would cause build failure when disabling support for particular CPUs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36946	2013-06-17 19:32:35 +00:00
Felix Fietkau	d3a7b5633c	kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702 ) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36937	2013-06-15 11:50:50 +00:00
Hauke Mehrtens	9492d445de	brcm47xx: run make kernel_oldconfig for 3.9 kernel config SVN-Revision: 36928	2013-06-12 14:51:50 +00:00
Hauke Mehrtens	87f994d16d	brcm47xx: remove support for kernel 3.6 SVN-Revision: 36927	2013-06-12 14:48:45 +00:00
Hauke Mehrtens	990423f3ef	brcm47xx: add initial support for kernel 3.9 SVN-Revision: 36926	2013-06-12 14:47:53 +00:00
Steven Barth	46d199d1e8	linux: add ipv6 failed-policy routing action (by Jonas Gorski) SVN-Revision: 36911	2013-06-11 09:27:53 +00:00
John Crispin	76c79f50d7	lantiq: Fixes to athxk EEPROM loading Use platform data array for storing ath5k EEPROM instead of creating another one. EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash. No need to keep the checksum fix now that the EEPROM is loaded completely. Add a manual eeprom swap for ath9k and keep the endian way. Use mac-offset property retrieved from the DTS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36901	2013-06-10 08:25:12 +00:00
John Crispin	7638caf35d	lantiq: make kernel_oldconfig Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch is the result of "make kernel_oldconfig" with defaults for new options. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36900	2013-06-10 08:25:07 +00:00
John Crispin	f7daed8b9a	lantiq: diag.sh with both red and green power LEDs This provides a boot LED sequence suitable for devices with both red and green LEDs for power. This assumes no "default-on" settings in the device tree. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36899	2013-06-10 08:25:02 +00:00
John Crispin	fc9532aeaa	ramips: add HAME MPR-A2 support This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898	2013-06-10 08:24:56 +00:00
John Crispin	30786d2dd0	ramips: add support for belkin F7C027 wemo/homeautomatisation plug Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 36897	2013-06-10 08:24:50 +00:00
Luka Perkov	da7590cd21	lantiq: fix formating in .dts files Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36882	2013-06-08 11:36:07 +00:00
Felix Fietkau	ab529a529b	ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879	2013-06-07 13:42:50 +00:00
Felix Fietkau	1ace51360f	kernel/generic: add a few missing kernel config symbols Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36878	2013-06-07 13:42:39 +00:00
Florian Fainelli	2b9d084af9	brcm63xx: add user-space support for Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877	2013-06-06 22:22:20 +00:00
Florian Fainelli	42e69f45c7	brcm63xx: add kernel space and image support for the Netgear CVG834G Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36876	2013-06-06 22:22:14 +00:00
Florian Fainelli	966d47989b	brcm63xx: add Broadcom cable modem firmware format header Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36875	2013-06-06 22:22:09 +00:00
Florian Fainelli	600b59642e	brcm63xx: add support for BCM3368 Add support for the Broadcom BCM3368 cable modem chipset, includes: - Ethernet - SPI - UARTs - GPIOs - PCI Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36874	2013-06-06 22:21:58 +00:00
Jonas Gorski	1beaf031d1	target: don't build jffs2 nor images by default Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36863	2013-06-05 20:58:59 +00:00
Jonas Gorski	dd9a24663b	omap24xx: convert to use the new jffs2_nand Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36862	2013-06-05 20:58:55 +00:00
Jonas Gorski	e7b504ce8e	kirkwood: convert to use the new jffs2_nand Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36861	2013-06-05 20:58:53 +00:00
Jonas Gorski	9f7ef8d5f0	target: split jffs2 NAND out of jffs2 Make jffs2_nand a separate option so this can be triggered without forcing jffs2 images for nor targets. Adds a new NAND_BLOCKSIZE variable that allows setting the generated layout in <page_size>:<block_size> pairs. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36860	2013-06-05 20:58:03 +00:00
Imre Kaloz	799bdc990a	there's no reason to have these generic files in the bin dir either SVN-Revision: 36852	2013-06-05 06:46:41 +00:00
Imre Kaloz	28e8b8dc05	only copy uImages to the bin dir on ramdisk builds SVN-Revision: 36851	2013-06-05 06:17:12 +00:00
Imre Kaloz	e161581d45	don't copy the zImages to the bin dir, factory u-boots can't use them SVN-Revision: 36850	2013-06-05 06:04:48 +00:00
Gabor Juhos	5bb2e8030d	ar71xx: add support for WIFI button on tp-link tl-mr3220v2 The TP-LINK TL-MR3220 v2 has a button on the left side labeled "WIFI". This is GPIO 24. This patch adds the support for this button. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36848	2013-06-04 13:25:54 +00:00
Gabor Juhos	d187e3c32e	generic: add port mirroring/monitoring capability to rtl8366rb switch This patch adds swlib attributes to the RTL8366RB switch/PHY found in the TL-WR1043ND router that allow to mirror ethernet packets to a monitor port. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36847	2013-06-04 13:25:52 +00:00
Imre Kaloz	a0e412a616	versioned files and dirs still make no sense when you support only a single kernel... SVN-Revision: 36836	2013-06-04 11:29:01 +00:00
Imre Kaloz	3a56df33ad	refresh patches SVN-Revision: 36835	2013-06-04 11:24:42 +00:00
Imre Kaloz	8170c9cfb0	add some more symbols SVN-Revision: 36834	2013-06-04 11:23:27 +00:00
Imre Kaloz	812bb43a47	move DT2 related kernel options into the harddist subtarget SVN-Revision: 36833	2013-06-04 11:19:41 +00:00
Imre Kaloz	58fa46c90c	drop support for the dns323 SVN-Revision: 36832	2013-06-04 11:13:18 +00:00
John Crispin	e9ef65175d	lantiq: revert [36779] as it caused a regression submitter was informed of a endinaess swap regression and replied with "works on my board" revert the patch and make arv7518 wifi work again Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36807	2013-05-31 13:25:07 +00:00
Gabor Juhos	da66ea52ec	ar71xx: register USB port for RB2011U* devices Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36801	2013-05-30 17:38:31 +00:00
Gabor Juhos	23bcceb058	ar71xx: create a separated network interface for the RB2011UAS SFP port Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36800	2013-05-30 17:38:30 +00:00
Gabor Juhos	151dca0935	ar71xx: make the SFP port usable on RB2011S boards The port 6 of the switch is connected to the SFP cage on the RB2011S boards. Add a helper function to correctly initialize the switch configuration data on those boards to make the SFP port usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36799	2013-05-30 17:38:28 +00:00
Gabor Juhos	a1f91282b4	generic: ar8216: allow to specify SGMII config via platform data Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36798	2013-05-30 17:38:26 +00:00
Gabor Juhos	c170d3c3e4	generic: ar8216: add get_port_link callback Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36797	2013-05-30 17:38:22 +00:00
Gabor Juhos	3467b17e69	ar71xx: rb2011: add switch led control values Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36796	2013-05-30 17:38:21 +00:00
Gabor Juhos	4cf6e53ccc	ar71xx: rb2011: update RGMII RX/TX delay values Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36795	2013-05-30 17:38:20 +00:00
Gabor Juhos	6da63a8793	ar71xx: rb2011: move NAND nCE init to rb2011_nand_init Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36794	2013-05-30 17:38:17 +00:00
Gabor Juhos	50c59c4797	ar71xx: add user-space support for RB2011UAS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36793	2013-05-30 17:38:15 +00:00
Gabor Juhos	d6554bf66a	ar71xx: add kernel support for the RB2011UAS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36792	2013-05-30 17:38:13 +00:00
Gabor Juhos	8e56b1e742	generic: ar8216: show chip revision in the kernel log Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36791	2013-05-30 16:25:14 +00:00
Gabor Juhos	d19dae6e2d	ar71xx: add profile and build image for the Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36790	2013-05-30 16:23:10 +00:00
Gabor Juhos	35b5b38316	ar71xx: add user-space support for TP-LINK Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36789	2013-05-30 16:23:09 +00:00
Gabor Juhos	91d7c3efc1	ar71xx: add kernel support for the TP-LINK Archer C7 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36788	2013-05-30 16:23:07 +00:00
Gabor Juhos	f02765086d	ar71xx: add USB workarounds for AR934x/QCA955x SoCs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36787	2013-05-30 16:23:06 +00:00
Gabor Juhos	6ff976a87a	ar71xx: add profile and build image for the DIR-601-B1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36786	2013-05-30 16:19:30 +00:00
Gabor Juhos	424c4c0b0a	ar71xx: allow to build CameoHornet images for multiple regions Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36785	2013-05-30 16:19:29 +00:00
Gabor Juhos	184dd34b6d	ar71xx: allow to override fw version in CameoHornet profile Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36784	2013-05-30 16:19:28 +00:00
John Crispin	e60cb01c45	lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting The GPIO buttons of ARV752DPW are active low. Treating them as active high caused a reboot loop as a reset-button press is detected by gpio-button-hotplug/gpio-keys-polled on startup. This fixes: https://dev.openwrt.org/ticket/12642 Signed-off-by: Rafael Gieschke <rafael@gieschke.de> SVN-Revision: 36783	2013-05-30 16:01:06 +00:00
John Crispin	c2b1e9eeef	lantiq: Fix ar8216 switch configuration On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36782	2013-05-30 16:00:59 +00:00
John Crispin	090a75447b	lantiq: DGN3500 support This requires all the preceding patches and finishes support for the DGN3500, also removing an obsolete file. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36781	2013-05-30 16:00:50 +00:00
John Crispin	a9968d9cb8	lantiq: enable retrieving kernel args from bootloader This patch is a device tree enhancement that IMHO is worthy of mainline. It allows the bootloader's commandline to be preserved even when the device tree specifies one. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36780	2013-05-30 16:00:42 +00:00
John Crispin	d1f3751d05	lantiq: wifi calibration from MTD This patch enables retrieving the wifi calibration data from an MTD partition. It requires the previous patch. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36779	2013-05-30 16:00:32 +00:00
John Crispin	83c3cd4ed9	lantiq: postpone PCI and wifi init This postpones the initialization of PCI and wifi until after the MTD initialization, so that calibration data may be loaded from there. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36778	2013-05-30 16:00:24 +00:00
John Crispin	b585923cc9	lantiq: fix LED-handling oversights This reassigns the PPPoE status to the LED that was intended to indicate it, rather than the DSL sync light. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 36777	2013-05-30 16:00:15 +00:00
John Crispin	1756047518	ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775	2013-05-30 15:59:56 +00:00
Luka Perkov	4b21af4268	imx6: add new target SVN-Revision: 36753	2013-05-29 01:27:29 +00:00
Luka Perkov	846e3d40a0	kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches SVN-Revision: 36752	2013-05-29 01:27:27 +00:00
Gabor Juhos	c4d0a49348	ar71xx: typo in detect TL-MR10U/TL-MR11U At offset 0x40, signature for TL-MR10U/TL-MR11U begin from 0x00, not 0x10/0x11. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36727	2013-05-26 16:38:00 +00:00
Gabor Juhos	cc7bedf8a3	ar71xx: fix TL-MR10U usb power MR10U is closer to MR3040 than WR703N. This changes also enable USB power on GPIO18. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36726	2013-05-26 16:37:59 +00:00
Gabor Juhos	7d2182c455	kernel: update linux 3.9 to 3.9.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36725	2013-05-26 16:02:34 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Gabor Juhos	93ce462b7e	ar71xx: set eth0 mac address to match bottom label of the OM2P LC Signed-off-by: marek@open-mesh.com CC: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36723	2013-05-26 16:02:29 +00:00
Gabor Juhos	0842478e44	ar71xx: add TP-LINK TL-MR10U Small router with 4MB flash, 32MB RAM http://www.tp-link.com.cn/product_300.html Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36722	2013-05-26 16:02:26 +00:00
Luka Perkov	0998065a53	generic: ar8216: add port mirroring Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both RX and TX traffic from LAN port 1 to LAN port 4: $ swconfig dev switch0 set enable_mirror_rx 1 $ swconfig dev switch0 set enable_mirror_tx 1 $ swconfig dev switch0 set mirror_monitor_port 4 $ swconfig dev switch0 set mirror_source_port 1 Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Tested-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 36713	2013-05-24 13:10:22 +00:00
Felix Fietkau	fe7e52e4a4	ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36679	2013-05-21 09:45:46 +00:00
Jonas Gorski	a01be4a217	kernel: update 3.9 to 3.9.3 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36676	2013-05-20 16:57:00 +00:00
Jonas Gorski	3ac261cd21	ar7: drop obsolete 3.3 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36674	2013-05-20 12:42:44 +00:00
Jonas Gorski	334e6d4e0c	ar7: drop obsolete 3.6 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36673	2013-05-20 12:42:41 +00:00
Jonas Gorski	49c81c6e00	ar7: switch to 3.9 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36672	2013-05-20 12:42:38 +00:00
Jonas Gorski	c4b943c82c	ar7: add support for 3.9 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36671	2013-05-20 12:42:36 +00:00
Jonas Gorski	4d0fcd0c49	kernel: add some missing symbols/move them to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36670	2013-05-20 12:42:32 +00:00
Jonas Gorski	b751b5893c	brcm2708: make it boot on revision 2 raspberry pis * update the bootcode.bin to the newest version - gpu/cpu mem split is now configured through config.txt, so no need to create more than one sd card image (just edit the config.txt) - bootcode.bin now supports the never revision 2 raspberry pis * add a commented prepopulated config.txt for easier config changes Taken from <https://github.com/Evilpaul/RPi-config> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36668	2013-05-20 12:07:03 +00:00
Jonas Gorski	c0435a971e	kernel: generic: add 3.10-rc1 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36663	2013-05-19 18:36:15 +00:00
Jonas Gorski	0a62b7c148	bcm63xx: add 3.9 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36660	2013-05-19 18:32:13 +00:00
Jonas Gorski	1f4e5f77a0	bcm63xx: Simplify CFE detection. Check bootloader argument in mtd. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: split into two patches, one for detection, one letting bcm63xxpart use it.] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36659	2013-05-19 18:32:02 +00:00
Jonas Gorski	6e2b85b401	kernel: update 3.9 to 3.9.2 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36658	2013-05-19 18:31:51 +00:00
Jonas Gorski	668604f91d	kernel: don't remove of_tables These are needed for OF setup of clocksource, clocks and irqchips. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36657	2013-05-19 11:27:28 +00:00
Felix Fietkau	56478636aa	ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36646	2013-05-17 07:31:00 +00:00
Felix Fietkau	144cfb65a4	ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36631	2013-05-13 19:13:33 +00:00
Felix Fietkau	2c5a5d8736	kernel: add missing PHY ID for an AR8327 switch variant Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36630	2013-05-13 19:13:27 +00:00
Felix Fietkau	eea89fea6a	build: add config symbols for different ARM arch levels Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36620	2013-05-13 15:04:58 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Jonas Gorski	ed06d2ad5c	bcm63xx: don't build CRAMFS Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36616	2013-05-12 21:41:52 +00:00
Jonas Gorski	ccd7fbba87	led and buttons support for board DWV-S0 Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36615	2013-05-12 21:41:50 +00:00
Jonas Gorski	0a907fdb8a	bcm63xx: remove defconfig support All boards use uci-defaults, no need to keep defconfig support. SVN-Revision: 36610	2013-05-12 11:54:38 +00:00
Jonas Gorski	bbd02c6fb7	kernel: fix CVE-2013-1763 in older kernels Newer kernels were already fixed by upstream. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36607	2013-05-12 10:55:12 +00:00
Felix Fietkau	0be8dd36dc	ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36600	2013-05-09 23:32:46 +00:00
Jonas Gorski	0b03ff2028	kernel: make zlib and lzo modules selectable Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36592	2013-05-09 20:50:07 +00:00
Hauke Mehrtens	0b161c6f9e	kernel: b53: use correct oops for bcm5365 switch SVN-Revision: 36589	2013-05-09 20:01:58 +00:00
Jonas Gorski	98f6dc1b43	kernel: allow building zsmalloc as a module again zsmalloc was changed to a bool because of missing exports in the kernel, but we already export the required symbol, so change it back to tristate. Closes #13481. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36587	2013-05-09 19:19:36 +00:00
Gabor Juhos	cb3d71ca8e	ar71xx: use combined kernel image in the CameoHornet template This allow us to increase the kernel partition size, and ensures, that the -factory image still usable via the original interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36584	2013-05-08 17:11:10 +00:00
Gabor Juhos	f938a798f8	ar71xx: add profile and build image for the RNX-N360RT board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36582	2013-05-08 17:07:19 +00:00
Gabor Juhos	852b8e9490	ar71xx: add user-space model detection for the RNX-N360RT board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36581	2013-05-08 17:07:18 +00:00
Gabor Juhos	c70694e755	ar71xx: add profile and build image for Netgear WNDAP360 [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36580	2013-05-08 17:03:43 +00:00
Gabor Juhos	33a2cbfd5c	ar71xx: add user-space support for Netgear WNDAP360 [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36579	2013-05-08 17:03:42 +00:00
Gabor Juhos	10b3ca5ccb	ar71xx: add kernel support for Netgear WNDAP360 Here is corrected version (only thing not working are wifi LEDs). [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36578	2013-05-08 17:03:34 +00:00
Gabor Juhos	39467e78e7	kernel: update linux 3.9 to 3.9.1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36577	2013-05-08 08:53:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
Gabor Juhos	d09ba5ef10	ar71xx: Fix AP135 partition layout Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36575	2013-05-08 08:53:49 +00:00
John Crispin	eb10f052ce	lantiq: enable portmaps again and set max port to 2 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36573	2013-05-07 10:58:52 +00:00
John Crispin	036fb79052	ramips: drop 3.7 support Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572	2013-05-07 10:58:44 +00:00
John Crispin	16a17b318a	ramips: properly setup the FEATURES variable Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571	2013-05-07 10:58:30 +00:00
John Crispin	bd6e12d904	ramips: fix memory detection rt5350 Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568	2013-05-06 18:23:56 +00:00
John Crispin	899120ddef	ramips: enable dsp extensions for rt305x and rt3883 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567	2013-05-06 16:45:59 +00:00
John Crispin	849ff98669	ramips: fix fypo in ethernet driver rt288x, rt3883 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565	2013-05-06 16:45:43 +00:00
John Crispin	eddd7f5773	ramips: Update ARC Freestation profile These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564	2013-05-06 16:45:35 +00:00
John Crispin	4f1ff28f08	ramips: Support setting active_low in devicetree gpio-export Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563	2013-05-06 16:45:27 +00:00
John Crispin	6af3b6721b	ralink: unbreak uart pinmux handling Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562	2013-05-06 16:45:20 +00:00
John Crispin	7c04b3bd66	ramips: fix gpio base numbering make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561	2013-05-06 16:45:12 +00:00
John Crispin	338ff04cab	ramips: add gpio base properties to dtsi files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560	2013-05-06 16:45:04 +00:00
John Crispin	65760ede8b	ramips: unbreak rt2880 support Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559	2013-05-06 16:44:56 +00:00
John Crispin	28bdb9efe9	ramips: fix DIR-602D1 flash size Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558	2013-05-06 16:44:47 +00:00
John Crispin	1c89a60431	ramips: unbreak gpio handling for uart mux group this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543	2013-05-04 11:36:51 +00:00
Gabor Juhos	bb429757c8	at91: build .dtb file for the CalAmp LMU500 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36542	2013-05-03 19:01:00 +00:00
Gabor Juhos	ccf95fe938	ar71xx: Fix AP135 PCI AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36541	2013-05-03 19:00:58 +00:00
Felix Fietkau	18c588a570	ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36530	2013-05-03 09:12:19 +00:00
Felix Fietkau	30c4360345	kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36529	2013-05-02 15:59:57 +00:00
Jonas Gorski	24636fcabf	bcm63xx: split into two subtargets, generic and SMP Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36527	2013-05-02 15:28:31 +00:00
Jonas Gorski	d11efa1428	bcm63xx: add SMP support for BCM6362 and BCM6368 BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36526	2013-05-02 15:28:26 +00:00
Jonas Gorski	8f15326acc	kernel: generic: don't strip /proc/irq on SMP /proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36525	2013-05-02 15:28:12 +00:00
Jonas Gorski	a80a4f3ec2	bcm63xx: fix hsspi flash registration for BCM6362 Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36524	2013-05-02 15:28:10 +00:00
Jonas Gorski	999a956f4c	bcm63xx: fix/enable livebox minipci Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 36523	2013-05-02 15:28:07 +00:00
Jo-Philipp Wich	6ac2b3b76a	atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. SVN-Revision: 36513	2013-05-02 11:46:53 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Florian Fainelli	db02b0e4ee	brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36506	2013-05-01 21:52:25 +00:00
Florian Fainelli	292368409e	brcm63xx: add missing binary operands to BCM6345 ethernet patch Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36505	2013-05-01 21:12:40 +00:00
Florian Fainelli	6f48ccea02	brcm63xx: remove 3.7 kernel support Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36504	2013-05-01 21:12:26 +00:00
Gabor Juhos	0ae43dbe9d	ar71xx: rename WNR2000v3 support patch Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36498	2013-04-30 10:44:11 +00:00
Gabor Juhos	d557a51a40	x86/geos: switch to 3.8.10 Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36496	2013-04-30 10:44:09 +00:00
Gabor Juhos	0fa71ca3e5	linux/3.9: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36495	2013-04-30 10:44:08 +00:00
Gabor Juhos	41445b41cc	linux/3.8: use backported pcibios_get_phb_of_node patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36494	2013-04-30 10:44:07 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
Gabor Juhos	8e466dcdf4	at91: add missing config symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36492	2013-04-30 10:43:58 +00:00
Gabor Juhos	d35545f3d7	linux/3.{8,9}: add missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36491	2013-04-30 10:43:57 +00:00
Gabor Juhos	25c45c0d53	linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36490	2013-04-30 10:43:56 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Hauke Mehrtens	ca7f9638d5	broadcom-diag: support for the WNDR3700v3 I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 36482	2013-04-28 21:11:17 +00:00
Hauke Mehrtens	7dee0dae35	brcm47xx: use kernel 3.8.10 as default kernel The biggest change with this kernel is a new partition parser. SVN-Revision: 36480	2013-04-28 18:25:16 +00:00
Hauke Mehrtens	00a7ace7cf	brcm47xx: add board detection for NETGEAR WNDR4500 V2 SVN-Revision: 36478	2013-04-28 18:19:31 +00:00
Hauke Mehrtens	e7e4afbb64	kernel: fix a memory leak in split_rootfs_data() allocate_partition() copies all the content of dpart into a new struct. SVN-Revision: 36475	2013-04-28 17:01:56 +00:00
Hauke Mehrtens	1bac172c44	kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. SVN-Revision: 36473	2013-04-28 16:52:11 +00:00
Jonas Gorski	ad1d3f00cb	kernel: update linux 3.9 patches to rc8 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36469	2013-04-28 11:55:23 +00:00
Jonas Gorski	a33dd13c98	kernel: add missing bcma defines and header file for bcrmfmac Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36468	2013-04-28 11:10:42 +00:00
Gabor Juhos	7c2632fbc5	ar71xx: add user-space support for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36461	2013-04-26 17:00:54 +00:00
Gabor Juhos	b29b7b65ea	ar71xx: add profile and build image for WNR2000v3 Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36460	2013-04-26 17:00:53 +00:00
Gabor Juhos	9b3c0d11a2	ar71xx: Add Netgear WNR2000v3 support Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36459	2013-04-26 17:00:52 +00:00
Gabor Juhos	183e2af1c7	ar71xx: add profile and build image for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36458	2013-04-26 17:00:50 +00:00
Gabor Juhos	7c4e2c1f72	ar71xx: add user-space support for the TL-WR720N v3 board Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36457	2013-04-26 17:00:49 +00:00
Gabor Juhos	5c11773f8a	ar71xx: add kernel support for TPLINK WR720N v3 Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36456	2013-04-26 17:00:48 +00:00
Gabor Juhos	c0691e29f1	mpc85xx: Add subtargets Generic and P1020 Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36454	2013-04-26 16:57:43 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	988ae9cbf8	at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452	2013-04-26 16:55:40 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	b42a173664	lantiq: make leds and network work on VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36445	2013-04-25 19:03:41 +00:00
John Crispin	520bf46375	lantiq: fix board detection helpers Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36444	2013-04-25 19:03:37 +00:00
John Crispin	157c86371f	lantiq: move dts files to thir own folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36443	2013-04-25 19:03:32 +00:00
John Crispin	4664e21293	generic: fix rtl8366_smi compile warning drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports': drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36442	2013-04-25 19:03:29 +00:00
John Crispin	9ae3adbe3c	lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36441	2013-04-25 19:03:25 +00:00
John Crispin	d3d18ae812	lantiq: make lzma-loader based images for VG3503J Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36440	2013-04-25 19:03:21 +00:00
John Crispin	a46acc80e4	lantiq: update VG3503J.dts to match new partition layout Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36439	2013-04-25 19:03:17 +00:00
John Crispin	46306c2e47	lantiq: add lzma-loader source Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36438	2013-04-25 19:03:13 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
John Crispin	831c7ea04f	preinit: move cmdline failsafe= handling ot the generic code Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36430	2013-04-25 19:02:37 +00:00
Jonas Gorski	90986b5581	bcm63xx: update patches with upstream submissions SVN-Revision: 36407	2013-04-23 13:55:36 +00:00
Jonas Gorski	2a1a16d2d5	bcm63xx: switch to linux 3.8 SVN-Revision: 36406	2013-04-23 13:55:17 +00:00
Steven Barth	4e8f7f37ed	Change default IPv6 config to enable DHCPv6-PD SVN-Revision: 36384	2013-04-22 19:40:16 +00:00
Felix Fietkau	a8a01b42ae	kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL SVN-Revision: 36378	2013-04-22 15:01:36 +00:00
Felix Fietkau	cd35ea2174	ar71xx: merge more unaligned access hacks from cerowrt-next Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36374	2013-04-22 12:53:21 +00:00
Felix Fietkau	f58dcb59c6	kernel: backport SSB/BCMA changes in preparation for a compat-wireless update Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36367	2013-04-19 12:39:40 +00:00
Gabor Juhos	f03960723a	linux/3.9: add missing config symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36365	2013-04-19 08:07:38 +00:00
Gabor Juhos	e07848664c	linux/3.[89]: update bridge_remove_ipv6_dependency patch Fixes the following warning: CC [M] net/ipv6/addrconf.o net/ipv6/addrconf.c: In function 'addrconf_init': net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36364	2013-04-19 08:07:37 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
Felix Fietkau	96bb7c123b	build: consistently use 'depends on' instead of 'depends' make the syntax more compatible with kernel menuconfig Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36351	2013-04-17 15:36:41 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Felix Fietkau	a662200205	kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360 ) SVN-Revision: 36342	2013-04-15 20:40:29 +00:00
Imre Kaloz	57b68daee9	refresh against -rc7 SVN-Revision: 36340	2013-04-15 16:10:01 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
Gabor Juhos	68c54dc34f	mpc85xx: use static SPI bus number for TL-WDR4900 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36329	2013-04-12 19:44:41 +00:00
Gabor Juhos	54635e7f78	linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36328	2013-04-12 19:44:38 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	10f432ba9d	fix rtl8366s OF binding Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36323	2013-04-12 18:56:05 +00:00
Gabor Juhos	687b3f04ce	mpc85xx: set preinit interface to eth0 by default This makes the WDR4900 accessible via ethernet in failsafe mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36322	2013-04-12 18:30:25 +00:00
Gabor Juhos	40e15b1fbf	mpc85xx: Generate fdt for P1020RDB Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36321	2013-04-12 18:30:24 +00:00
Gabor Juhos	f43bdf34cd	mpc85xx: Add P1020RDB board support Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36320	2013-04-12 18:30:22 +00:00
John Crispin	d5f87e193c	add VG3503J support this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36315	2013-04-11 19:18:07 +00:00
John Crispin	fbc1e3732b	add FE phy firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36314	2013-04-11 19:17:48 +00:00
John Crispin	0d32469457	add missing pinmux patch Fix lantiq pinmux which affected PCI and USB. Known affected boards are: ARV4518 and ARV7518. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 36312	2013-04-11 07:12:37 +00:00
Felix Fietkau	6436b3f736	cns3xxx: fix USB ehci/ohci platform driver Update ehci/ohci driver registration to conform to the new platform drivers. This fixes missing USB host support in 3.8.x Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 36309	2013-04-10 16:20:50 +00:00
Felix Fietkau	edd8048107	kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base Fixes booting on single-core CNS3xxx devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36308	2013-04-10 16:07:50 +00:00
Felix Fietkau	06733c2650	kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36307	2013-04-10 13:45:12 +00:00
Felix Fietkau	7fa2957103	kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36304	2013-04-10 13:11:29 +00:00
Felix Fietkau	df3d4690bd	kernel: keep dropped stats in fq_codel Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36303	2013-04-10 13:11:25 +00:00
Felix Fietkau	ec3a8846fc	kernel: tune fq_codel defaults for common netdevice speeds Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36302	2013-04-10 13:11:21 +00:00
Felix Fietkau	307965026a	kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36301	2013-04-10 13:11:16 +00:00
Florian Fainelli	915969ff2c	kernel: refresh patches against 3.9-rc6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36297	2013-04-09 16:16:20 +00:00
Florian Fainelli	c3366cd164	kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36296	2013-04-09 16:16:16 +00:00
Florian Fainelli	518d6a9273	kernel: backport switch user API changes after r36283 3.3 and 3.6 kernels do not make use of the UAPI headers, still they need to provide an up-to-date switch.h copy for swconfig to build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36295	2013-04-09 15:47:01 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide\|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
John Crispin	fff58a5801	allow loading port maps from OF Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36283	2013-04-09 14:19:09 +00:00
Steven Barth	ea94d66b0f	Adapt default network configuration for IPv6 SVN-Revision: 36278	2013-04-09 08:03:08 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	9e6ae6ab5d	x86/generic: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36256	2013-04-07 15:53:17 +00:00
Gabor Juhos	0d0bfe3d41	x86/generic: switch to 3.8 Only tested within a VM. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36255	2013-04-07 15:53:15 +00:00
Gabor Juhos	f5d28ea3ce	x86/generic: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36254	2013-04-07 15:53:13 +00:00
Gabor Juhos	71a51e3b91	x86/alix2: remove old kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36253	2013-04-07 15:53:11 +00:00
Gabor Juhos	15d311ec18	x86/alix2: switch to 3.8 Tested on an alix2d13 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36252	2013-04-07 15:53:09 +00:00
Gabor Juhos	9d05b1b683	x86/alix2: add config for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36251	2013-04-07 15:53:08 +00:00
Gabor Juhos	89f690843f	x86: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36250	2013-04-07 15:53:05 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Felix Fietkau	fde143b66f	cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36241	2013-04-07 11:24:30 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Hauke Mehrtens	4a46687d25	brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. SVN-Revision: 36235	2013-04-06 22:22:26 +00:00
Hauke Mehrtens	204bde8d98	brcm47xx: fix error in board detection when nvram is not available. SVN-Revision: 36234	2013-04-06 19:02:25 +00:00
Gabor Juhos	d45ef216e6	linux/3.8: implement pcibios_get_phb_of_node for MIPS Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36233	2013-04-06 17:33:03 +00:00
Gabor Juhos	51fa28e2c2	linux/3.8: backport devm_ioremap_resource from 3.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36232	2013-04-06 17:33:00 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	747b795b56	generic: rtl8367: add compatible string with vendor prefix Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36230	2013-04-06 17:19:31 +00:00
Gabor Juhos	f5d8d80ca9	generic: rtl8367b: fix rtl8367b_extif_init_of * disable external interface if its property is not present * show an error message if the extif property is not valid * use proper error values intead of -1 * fix memory leak * wrap long lines Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36229	2013-04-06 17:03:09 +00:00
Gabor Juhos	32d3b456f0	linux/3.8: add more missing symbols Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36228	2013-04-06 16:56:47 +00:00
Gabor Juhos	89539462a8	linux/3.8: add missing symbol Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36226	2013-04-06 16:38:36 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	38bd9b4337	generic: rtl8367: allow to load extif config from OF Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36220	2013-04-06 12:37:36 +00:00

... 6 7 8 9 10 ...

10813 commits