1347 commits

Author	SHA1	Message	Date
Felix Fietkau	81e3014e6d	ramips: rework and fix m25p80 chunked-io support ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43808	2015-01-02 21:53:02 +00:00
Felix Fietkau	aefd3c569c	ramips: split mt7621 spi into a separate driver, increase maximum transfer size ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43807	2015-01-02 21:52:53 +00:00
Imre Kaloz	6bfd210ade	honor the bootloader's bootargs ... Only overwrite the bootloader's bootargs if "chosen" exists in the dtb Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43802	2015-01-02 16:48:20 +00:00
John Crispin	0ffb7323d0	ralink: remove partitoon map from mt7621.dtsi ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43720	2014-12-15 15:55:37 +00:00
John Crispin	019ea725aa	add "preinit_regular" diag.sh set_state argument ... This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715	2014-12-15 10:37:00 +00:00
Rafał Miłecki	fbea00b031	ramips: update mtd patches to apply after changes from r43700 ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43709	2014-12-15 09:10:43 +00:00
John Crispin	6f2b7567b8	ralink: drop old pinmux nodes from dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43701	2014-12-14 08:57:16 +00:00
John Crispin	263070a2e7	ramips:Add support for Aigale Ai-BR100 ... Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 43681	2014-12-13 08:07:03 +00:00
John Crispin	6c4e7b22eb	ralink: fix lenovo y1 wan port mapping ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43667	2014-12-12 16:17:31 +00:00
John Crispin	b1f7a027da	ralink: make uartf functional on AWM002 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43664	2014-12-12 16:17:03 +00:00
John Crispin	1ef2106725	ralink: mt7621 was missing a symbol that made the CC builder fail ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43629	2014-12-11 18:54:30 +00:00
Felix Fietkau	9a495f6bbb	kernel: refresh patches ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43564	2014-12-08 12:04:25 +00:00
John Crispin	8a123f6f66	ramips: generate factory images for Nexx devices ... Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 43541	2014-12-07 16:53:22 +00:00
John Crispin	d04c4a311e	ralink: mt7621 is a 1004Kc ... Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43514	2014-12-03 20:22:42 +00:00
John Crispin	506cf51b53	ralink: fix pci reset patch ... sorry, forgot to make target/update before commiting the last patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43374	2014-11-24 20:39:48 +00:00
John Crispin	41f9765acd	ralink: add proper reset of pci core ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43370	2014-11-24 19:12:35 +00:00
John Crispin	d93dc245e5	ralink: various fixes to the wm8960 setup code ... still no sound but the codec is properly detected now, powers up and i can hear noise on the speakers. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43305	2014-11-19 09:20:12 +00:00
John Crispin	989bfd815b	ralink: make the dmaengine driver compile under 3.14 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43304	2014-11-19 09:20:02 +00:00
John Crispin	e1f6d0dd0a	ralink: fix tx vlan offload and hardware status ... hardware status and tx vlan offload support on all targets except rt5350. so i modify the IS_ENABLE condition only for mt7621. support mt7621 hardware status reference by SDK. but i don't have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE to 0 to let software count. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43303	2014-11-19 09:19:57 +00:00
John Crispin	a5f562993e	ralink: support netconsole ... Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43302	2014-11-19 09:19:49 +00:00
John Crispin	9c5dfd9546	ralink: improve tx vlan offload ... hardware tx vlan offload only support max 16 vids now use add/delete vlan interface to update vlan id table when duplicate vlan id index detect. disable hardware tx vlan offload support. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43301	2014-11-19 09:19:43 +00:00
John Crispin	510ff1f1b8	ralink: merge the mt7620a/n subtargets ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43300	2014-11-19 09:19:38 +00:00
John Crispin	752745a85a	ralink: set ralink_soc on mt7621 ... sdhci failed to init because of this Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43293	2014-11-17 21:58:30 +00:00
John Crispin	32d4348540	ralink: fix pcie reset ... some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43292	2014-11-17 16:27:48 +00:00
Felix Fietkau	28b26fa603	ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166D ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43283	2014-11-16 12:26:53 +00:00
Felix Fietkau	b3f2d3d01b	ramips: use mediatek,mtd-eeprom instead of ralink for mt76 ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43282	2014-11-16 12:26:47 +00:00
Felix Fietkau	02c319c27a	ramips: fix default config breakage on whr-1166d ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43281	2014-11-16 11:39:19 +00:00
John Crispin	c073bf6bdf	ralink: few updates tot he sdhci probe code ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43275	2014-11-15 14:35:32 +00:00
John Crispin	ce1c580efb	ralink: make the sdhci module build again ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43274	2014-11-14 18:51:41 +00:00
John Crispin	7cc72e4b93	ralink: dont define pm_poweroff ... this makes gpio-poweroff work Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43254	2014-11-14 16:53:40 +00:00
John Crispin	be23eaa8c3	ralink: fix bank detection in mt7621 gpio driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43253	2014-11-14 16:53:34 +00:00
John Crispin	6d4282086d	ralink: enable the proper drivers in the mt7621 config ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43252	2014-11-14 16:53:29 +00:00
John Crispin	0767ee848a	ralink: fix broken pinmux function naming inside mt7621.c ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43251	2014-11-14 16:53:21 +00:00
John Crispin	8cde8a05c9	ralink: update sdhci driver ... the new driver handles newer SoCs Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43250	2014-11-14 16:53:15 +00:00
John Crispin	66463a5b5d	ralink: update pcie driver to load ranges from dts ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43249	2014-11-14 16:53:07 +00:00
John Crispin	7963782b86	ralink: add a new global ralink_soc variable ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43248	2014-11-14 16:53:01 +00:00
John Crispin	caa29dea2c	ralink: update ethernet driver to use new ralink_soc variable ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43247	2014-11-14 16:52:52 +00:00
John Crispin	bf8bb5b611	ralink: fix the 10mbit bug on mt7621 ... a missing "val =" caused the AN bit in the phy0 reg to be flushed. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43246	2014-11-14 16:52:47 +00:00
John Crispin	194ca6127e	ralink: improve mt7530 support ... the SDK does a bit of extra init that we did not do yet when using an external mt7530. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43245	2014-11-14 16:52:42 +00:00
John Crispin	0371dabc13	ralink: add support for WSR-600/1166 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43244	2014-11-14 16:52:36 +00:00
John Crispin	062828aee0	ralink: mt7621 has a different base addr for PVID ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43243	2014-11-14 16:52:30 +00:00
John Crispin	938e1e03fb	ralink: drop some unused code from pci-mt7620a ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43242	2014-11-14 16:52:25 +00:00
John Crispin	bfcdc8711c	ralink: fix up dts for mt7621 eval board ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43238	2014-11-12 14:55:00 +00:00
John Crispin	86e3315ece	ralink: add support for mt7621 ethernet ... somehow all switch ports still come up as 10mbit. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43237	2014-11-12 14:54:50 +00:00
John Crispin	45814d150a	ralink: more mt7530 fixes ... make 1166 wan port work. this broke due to the esw_polling bug Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43236	2014-11-11 11:46:16 +00:00
John Crispin	e399931376	ralink: fix mdio polling of external phys if only 1 phy exists ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43235	2014-11-11 11:46:09 +00:00
John Crispin	6623feb572	ralink: remove IC plus phy driver ... this driver confuses some boards Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43234	2014-11-11 11:46:02 +00:00
Luka Perkov	da53ac677f	ralink: DCS-930: enable sound ... Camera has microphone; in order to use it by default enable sound support. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43232	2014-11-11 00:08:05 +00:00
Luka Perkov	494c6e7f6e	ralink: update DCS-930 dts ... * read MAC address from factory partition * remove port defines since there is only one port (most likely C/P error) Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43231	2014-11-11 00:05:14 +00:00
Felix Fietkau	9e98d559f6	ramips: fix initramfs image build handling ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43219	2014-11-08 15:40:17 +00:00
Felix Fietkau	455ba77b6a	ramips: add eeprom data for 802.11ac wlan on WHR-1166D ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43218	2014-11-08 14:15:49 +00:00
Felix Fietkau	29f71d384f	ramips: add missing size/address-cells to device tree include files ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43217	2014-11-08 14:15:44 +00:00
John Crispin	604a3e5134	ralink: fix a regression that broke pcie on mt7621 ... i accidentally dropped 2 lines while adding mt7628 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43216	2014-11-08 13:45:26 +00:00
Felix Fietkau	07754ac297	ramips: enable sysupgrade for whr-600d, whr-1166d ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43213	2014-11-08 12:18:58 +00:00
John Crispin	503a34ca50	ralink: fix the compat string for mt7620a pci ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43211	2014-11-08 12:12:05 +00:00
John Crispin	89f74722b7	ralink: assign default ranges inside the pci driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43207	2014-11-07 10:51:08 +00:00
John Crispin	9007e2244f	ralink: mt7628 does not actually need this fix for the ethernet driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43206	2014-11-07 10:51:00 +00:00
John Crispin	c32ad22e40	ralink: improve r43200 ... r43200 tries to detect if the fixup is needed or not. control the behaviour via OF instead and disable unused ports. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43201	2014-11-06 12:19:53 +00:00
John Crispin	0cc0ba2b3a	ralink: only apply ephy1 fixup if the phy is present ... this broke e1700 lan2 as the fixup was applied to the phy inside the mt7530. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43200	2014-11-06 11:11:44 +00:00
John Crispin	78b6222851	ralink: tweak e1700 dts file ... the current driver code wont know which mt7530 to apply the llllw setting to. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43199	2014-11-06 09:31:45 +00:00
John Crispin	c5954fc510	ralink: make pci driver handle mt7628 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43198	2014-11-06 09:31:37 +00:00
John Crispin	cadf517107	ralink: add support for mt7628 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197	2014-11-06 09:31:31 +00:00
John Crispin	f8404aaf9e	ralink: add mt7628 support to the ethernet driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43196	2014-11-06 09:31:19 +00:00
John Crispin	26504289df	ralink: cleanup ethernet Makefile/Kconfig ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43195	2014-11-06 09:31:09 +00:00
John Crispin	d524fe46fd	ralink: move ethernet driver to files/ ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43194	2014-11-06 09:31:03 +00:00
Imre Kaloz	d738d22bf8	add support for the Linksys E1700 ... SVN-Revision: 43186	2014-11-05 14:37:13 +00:00
John Crispin	b25b58a96a	ralink: add pci bidge node to mt7620a dts file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43172	2014-11-03 20:20:46 +00:00
John Crispin	cc142739f2	ralink: fix wan port on whr-1166 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43171	2014-11-03 20:20:40 +00:00
John Crispin	cc5194cf03	ramips: add support for Airlink101 AR670W ... This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153	2014-11-03 08:00:13 +00:00
John Crispin	2f30ba5328	ralink: make sure a mii_bus is loaded before accesing its state ... this caused a crash on boot Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43120	2014-10-30 10:10:57 +00:00
John Crispin	0b64dca49d	ralink: load mt7530 driver on the 3 buffalo units ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43119	2014-10-30 10:10:51 +00:00
John Crispin	0b19244498	ralink: mt7530 - force wan port up ... some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43117	2014-10-30 08:44:00 +00:00
John Crispin	38692d14f2	ralink: fix mt7530 for newer silicon revisions ... latest mt7530 silicon seems to have a different phy id. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43113	2014-10-30 08:07:49 +00:00
John Crispin	152d692a1f	ramips: improve ralink ethernet driver ... Change list: * add tx scatter gather function. * add software rx vlan offload to let GRO work. * add jumbo frame support. because use build_skb so max MTU is 3812. * enable hardware tx vlan. * enable GRO and remove LRO. because it can improve performance and can work on forwarding. * enable/fix tx padding function. * let napi handle tx clean up. * support ethtool operation. now support message level, hardware status and coalesce. * ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it. Notes: * build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a. * TCP NAT performance improve. test with netperf. - rt2880(gigabit) from 5x to 12x Mbps. - rt3x5x from 6x to 94 Mbps. - rt5250 from 5x to 8x Mbps. - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame. - mt7620 still 94Mbps. * TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43108	2014-10-29 19:43:59 +00:00
John Crispin	c0bf47232a	ralink: fix switch config on mt7530 evb ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43105	2014-10-29 18:51:02 +00:00
John Crispin	8223e78121	ralink: fix a off by 4 bug in mt7530 ... 0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43104	2014-10-29 18:49:46 +00:00
John Crispin	d0bf15f235	ramips: add support for A5-V11 board (resubmit) ... (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102	2014-10-29 11:01:17 +00:00
John Crispin	d1a1ad3e66	ramips: fix filenames in PorayDualSize factory images ... SVN-Revision: 43073	2014-10-26 17:18:45 +00:00
Felix Fietkau	c288d2d6d9	kernel: makefiles: make use of new var KERNEL_PATCHVER ... replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047	2014-10-24 19:34:02 +00:00
John Crispin	5c33e9565b	ramips: add comments for image/Makefile. ... Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42991	2014-10-20 06:29:51 +00:00
John Crispin	6e1637f8fa	firmware-utils: restore compilation of mkhilinkfw. ... Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42989	2014-10-20 06:29:38 +00:00
John Crispin	7bac455a4c	ramips: add support for Nexx WT3020 devices ... SVN-Revision: 42983	2014-10-20 06:28:48 +00:00
John Crispin	5b40a150ea	ramips: sort boards in upgrade/platform.sh alphabetically ... SVN-Revision: 42982	2014-10-20 06:28:39 +00:00
Felix Fietkau	35e9d448f2	ramips: fix usercfg partition offset for WHR-1166D ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42958	2014-10-19 08:45:56 +00:00
John Crispin	20940138ac	scripts: fix wrong usage of '==' operator ... [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911	2014-10-14 12:21:11 +00:00
John Crispin	06a849575d	ralink: Build 8M image for 7Links PX-4885 ... 7Links PX-4885 (clones) can also be purchased with 8MB flash. Creating images for these routers, use dtsi for common part Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42892	2014-10-13 19:41:36 +00:00
John Crispin	1bbc5de86e	ralink: various i2c related fixes ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42868	2014-10-10 08:56:53 +00:00
John Crispin	af1207b58c	ramips: add support for Nexx WT1520 ... Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 42867	2014-10-10 08:56:43 +00:00
John Crispin	97c202968a	ralink: various i2c fixes ... the driver did not handle all states correctly causing a deadlock of the i2c hw block. Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it> SVN-Revision: 42807	2014-10-06 20:05:13 +00:00
John Crispin	d76b7e0221	ramips: D-Link DIR-810L: make led naming consistent with other boards ... Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42789	2014-10-06 04:52:36 +00:00
John Crispin	98114e7cdd	ralink: Add missing code to free GPIO on Ralink SoC ... Signed-off-by: schildt@ibr.cs.tu-bs.de Acked-by: info@gerhard-bertelsmann.de SVN-Revision: 42788	2014-10-06 04:52:26 +00:00
John Crispin	b04bb3eea7	ramips: Support for RAMIPS based Tripmate HT-TM02 board ... Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785	2014-10-06 04:52:07 +00:00
John Crispin	d4cc995c53	ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds naming ... SVN-Revision: 42619	2014-09-19 11:07:08 +00:00
John Crispin	4ef1237545	ralink: drop dwc_otg support. dwc2 seems stable ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42617	2014-09-19 10:52:37 +00:00
John Crispin	17cf9c4593	ralink: drop 3.10 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42481	2014-09-12 06:50:46 +00:00
Luka Perkov	02629d8f87	kernel: update 3.14 to 3.14.18 ... Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463	2014-09-10 21:40:19 +00:00
John Crispin	4662c3b847	ralink: dwc_otg->dwc2 ... the old dwc_otg driver is starting to fall apart and fails on newer 3g modems and some storage devices. switch to the upstream dwc2 driver which is no longer in staging/. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42446	2014-09-08 17:33:16 +00:00
John Crispin	bdba024c7b	ralink: add dwc2 device_reset() call ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42445	2014-09-08 17:32:52 +00:00
John Crispin	4d96ccd87a	target: set myself as maintainer ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42335	2014-08-30 09:59:18 +00:00
John Crispin	d1f8b9bd76	ralink: DIR-645 picks up incorrect MAC address in DTS file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42321	2014-08-28 09:19:56 +00:00
John Crispin	24a6617585	ramips: unbreak i2c for 3.14 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42315	2014-08-28 06:05:36 +00:00
John Crispin	1349ebb5ba	ralink: set 3.14 as default ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42305	2014-08-26 13:12:12 +00:00
John Crispin	0c14bea523	ralink: the mt7620 evb has a usb port ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42293	2014-08-25 16:31:13 +00:00
John Crispin	d3d9d55cde	ralink: a few 3.14 related fixes ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42292	2014-08-25 16:31:09 +00:00
John Crispin	843fc45e27	ralink: fix mt7620 ohci 3.14 ... the ohci phy was not reset properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42291	2014-08-25 16:31:05 +00:00
John Crispin	ca737049d2	ralink: fix mt7620 ohci 3.10 ... the ohci phy was not reset properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42290	2014-08-25 16:31:01 +00:00
John Crispin	3d00a1109e	ralink: mt7620 has obchi/ehci and not dwc2 ... fix the default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42289	2014-08-25 16:30:57 +00:00
John Crispin	fdc41e2fd7	ramips: enable second SPI for VoCore ... This patch enables the second SPI as spidev and also fixes some typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42277	2014-08-25 06:35:46 +00:00
John Crispin	a3fd3dc796	ramips: second spi device on rt5350 ... This is based on Jon Smirl's patch with the following changes: - Set CS polarity as low by default. - Add support for changing CS polarity. - Add support for changing LSB/MSB. - Add support for changing SPI mode. - Fix indentations. I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42276	2014-08-25 06:35:42 +00:00
John Crispin	e9e519a147	ramips: fix OMNI-PLUG.dts ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42232	2014-08-21 06:41:27 +00:00
John Crispin	ff3ea02772	ramips: add omni plug leds ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42201	2014-08-18 16:09:21 +00:00
John Crispin	d04cab8dfc	ramips: Add support for Omnima MiniPlug ... This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200	2014-08-18 16:06:48 +00:00
John Crispin	be6bbc7975	ramips: fix switch config for Edimax 3G-6200n ... Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42194	2014-08-18 13:10:04 +00:00
John Crispin	60bf96e3a0	ralink: clean up HAME profiles, remove unnecessary packages. ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42192	2014-08-18 13:09:46 +00:00
John Crispin	a62e8bd145	ramips: add mpr-a1 to default profile ... Add hame mpr-a1 to default ramips profile. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42191	2014-08-18 13:09:43 +00:00
John Crispin	bb9a23aca2	ramips: Hame: change LED name mpr-x -> hame ... Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42190	2014-08-18 13:09:39 +00:00
John Crispin	0fc4383d69	ramips: make use of the new board detection layer ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42186	2014-08-18 13:09:20 +00:00
John Crispin	3a9752bbd2	ramips: add a workaround to fix failsafe on RT5350 ... Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179	2014-08-18 13:08:52 +00:00
John Crispin	f80312613d	ramips: enable additional GPIOs on HAME MPR-A1 ... According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose 6 unused GPIOs, only one of them working as configured in the current DTS. This patch enables GPIO22-26. Tested on hardware. [1] http://i.imgur.com/kHVW2Ox.jpg [2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698 Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42178	2014-08-18 13:08:48 +00:00
John Crispin	bf1e92f526	ralink: add back the gpio_export_named() patch for 3.14 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42176	2014-08-18 13:08:33 +00:00
John Crispin	bc67bd2295	ralink: add 3.14 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42040	2014-08-07 14:41:19 +00:00
John Crispin	997ca19fd2	ralink: revert r37163 ... https://dev.openwrt.org/ticket/17071 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42036	2014-08-07 12:38:20 +00:00
John Crispin	17b8d9c976	ramips: add profile for easyacc wizard8800 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41986	2014-08-03 14:31:18 +00:00
John Crispin	058a5c85ef	firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting ... Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 41962	2014-08-03 11:13:58 +00:00
John Crispin	04e4ff282a	ramips:support Lenovo AC1200 Wireless router ... Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> SVN-Revision: 41961	2014-08-03 11:13:52 +00:00
John Crispin	21845cb45d	ramips: Add support for VoCore ... This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939	2014-08-01 20:51:24 +00:00
John Crispin	7d9bac5247	ramips: Add support for SPI_CS1 pinmux ... This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41938	2014-08-01 20:51:14 +00:00
John Crispin	9efd7ebd34	ramips: add support for easyacc wizard8800 ... Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de> SVN-Revision: 41936	2014-08-01 11:19:50 +00:00
John Crispin	c6674722b9	ramips: Fix LEDs on the Kingston MLW221 ... LED Fix up for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41933	2014-08-01 11:19:39 +00:00
John Crispin	6fb04ff871	ramips: correct typo ubsphy -> usbphy ... This appears to be a typo. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41859	2014-07-28 15:26:36 +00:00
John Crispin	6f6dc62ca2	ramips: fix mode switch gpio for AsiaRF AWM eval board ... Fix a typo: gpio 21 is already used for the WPS led. Gpio 20 is the right one (tested) for the mode switch. Confirmed that /sys/kernel/debug/gpio state followed the position of the switch. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41858	2014-07-28 15:26:32 +00:00
John Crispin	636f2b83e6	ramips: add ethernet macaddr to dts for AWM003-EVB ... Follows the pattern of http://patchwork.openwrt.org/patch/5970/ Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41857	2014-07-28 15:26:23 +00:00
John Crispin	5b4abf87d7	ramips: add support for Kingston MLW221 ... This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41841	2014-07-26 20:36:22 +00:00
John Crispin	b77e92e020	ramips: ethernet mac cleanup ... Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839	2014-07-26 20:36:09 +00:00
John Crispin	443aee86bf	ramips: fix vlan configuration for asiarf avm003 ... The earlier r41797 change was missing this part, to enable the right vlan configuration. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41838	2014-07-26 20:36:01 +00:00
John Crispin	08fb5fb326	ramips: fix sysupgrade for asiarf awm003 ... Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41837	2014-07-26 20:35:46 +00:00
John Crispin	0b5b8de818	ramips: fix gpio mapping on MZK-750DHP ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41811	2014-07-23 07:49:54 +00:00
John Crispin	e5d4e5dee3	ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends. ... Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 41810	2014-07-23 07:49:50 +00:00
John Crispin	2c356c4bb7	ramips: add a profile for AWM003 ... same as AWM002 but with 64mb RAM Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41797	2014-07-22 09:58:21 +00:00
John Crispin	ba63338d3f	kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org> ... SVN-Revision: 41776	2014-07-20 17:31:11 +00:00
John Crispin	4d22954db0	ramips: fix mac address partitions on ASL-26555 ... ASL-26555 16MB: caldata is present on uboot-env and devdata, but the proper one seems to be the devdata, since mac address corresponds to Amper, the real manufacturer, meanwhile the caldata on uboot-env corresponds to D-Link. ASL-26555 8MB: caldata is only present on uboot-env, but its mac address corresponds to Alpha, the real manufacturer. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41768	2014-07-20 17:30:28 +00:00
John Crispin	f44d3f9980	ramips: soc wmac eeprom cleanup ... Move eeprom extraction from scripts to dts files. Additionally there are few other changes like: - whitespace fixes - add partition labels where needed - BR6524N board doesn't exist (lost in translation?) - fix Edimax 3g-6200nl model - add wmac eeprom to dts for Asus RT-N14U board Compile tested all subtargets and their profiles. Run tested on: - Asus RT-N15 - Asus RT-N14U - Buffalo WHR-600D - Argus ATP52B - Sparklan WCR-150GN Few problems noted: - many boards didn't have wmac eeprom information defined at all - several boards don't have any patitions defined (see FIXME comments in dts) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41680	2014-07-17 10:55:31 +00:00
John Crispin	74db9511dc	ramips: basic support for Planex MZK-750DHP ... some gpios are still missing. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41654	2014-07-14 17:10:39 +00:00
John Crispin	e33584f6b8	ramips: squelch mdio debugging info on rt2880 ethernet ... Use pr_debug rather than pr_info since it is only relevant for debugging. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 41653	2014-07-14 17:05:40 +00:00
John Crispin	76ba6846a2	ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41634	2014-07-14 07:38:32 +00:00
John Crispin	8c577d9fde	ramips: extract mac address from flash on WHR-600D board ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41633	2014-07-14 07:38:28 +00:00
John Crispin	4af1b51ec3	ramips: extract default lan_mac from eth0 ... The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts. But lan_mac is not set by default, this results in lan and wan having the same mac. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41632	2014-07-14 07:38:23 +00:00
John Crispin	ba3988fb16	ramips: add support for WR8305RT board ... Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584	2014-07-12 06:54:03 +00:00
John Crispin	03faf4618e	ramips: add support for Zbtlink WA05 router ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41579	2014-07-10 22:02:28 +00:00
John Crispin	6134a3de30	target/linux/*: more dead package cleanups ... found 2 more Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41574	2014-07-10 20:15:50 +00:00
John Crispin	32e93efc73	target/linux/*: more dead package cleanups ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571	2014-07-10 20:05:43 +00:00
John Crispin	94802dca60	ralink: wpa does not exist, use wpad-mini instead ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41561	2014-07-10 19:16:19 +00:00
John Crispin	bbfb3baaed	ramips: add missing rt3352 usb phy node to dts ... Signed-off-by: michael <igvtee@gmail.com> SVN-Revision: 41476	2014-07-02 16:37:30 +00:00
John Crispin	62287e589d	ramips: fix target rt5350 only have 28 gpios ... Signed-off-by: michael <igvtee@gmail.com> SVN-Revision: 41475	2014-07-02 16:37:26 +00:00
John Crispin	80e3282739	ralink: make xhci platform depend on mt7621 ... this broke CONFIG_ALL builds for mt7620 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41471	2014-07-02 14:32:43 +00:00
John Crispin	3d81a4ef82	ralink: add Wansview NCS601W IP Camera ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41453	2014-07-02 07:42:44 +00:00
John Crispin	c749b310ed	ralink: register wifi firmware for WRTnode ... After r41444 wifi working on WRTnode. Tested. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41452	2014-07-01 18:17:55 +00:00
John Crispin	9c84f72f85	ramips: set default vid of each vlan, so it won't need be set explicitly. ... Signed-off-by: Xiongfei Guo <xfguo@credosemi.com> SVN-Revision: 41448	2014-07-01 13:18:27 +00:00
John Crispin	4ddc0f9ff3	ramips: add WHR-1166 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41447	2014-07-01 10:26:42 +00:00
John Crispin	3c88de0d47	ramips: sync the WHR-600D flash layout with that of the vendor FW ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41446	2014-07-01 10:26:38 +00:00
John Crispin	2e8c6e4128	ramips: add wmac to mt7620a device tree ... Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41445	2014-07-01 10:26:33 +00:00
John Crispin	5f6e7e1f44	ramips: add wmac to mt7620n device tree ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41444	2014-07-01 10:26:30 +00:00
John Crispin	bbd8f9c96a	ramips: enable wmac clock for mt7620 ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41443	2014-07-01 10:26:25 +00:00
John Crispin	22c4f2475b	ralink: refresh kernel patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41353	2014-06-26 13:47:50 +00:00
John Crispin	994e5ce2f9	kernel: update 3.10.36->3.10.44 ... 205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41351	2014-06-26 13:47:42 +00:00
John Crispin	975728813a	ralink: fix up WRTNode vs WRTNODE in the dts file ... https://dev.openwrt.org/ticket/16899 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41343	2014-06-26 11:43:26 +00:00
John Crispin	021e728962	ralink: Update MT7530 switch driver. ... - Support set VLAN ID of each vlan. - Support untag feature. - Replace register address with C MACRO. - There are 8 ports for MT7530 actually. Signed-off-by: Xiongfei Guo <xfguo@credosemi.com> SVN-Revision: 41331	2014-06-24 18:14:14 +00:00
John Crispin	9284956ad8	ramips: cleanup some rt305x profiles ... move both asus boards to asus.mk rename HW5503G profile to HW550-3G to match name in image/Makefile (fixes #16599) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 41271	2014-06-19 14:13:07 +00:00
John Crispin	dc5fe5f73f	ramips: RT-N56U support fixes and factory image creation ... Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> SVN-Revision: 41224	2014-06-16 18:57:20 +00:00
John Crispin	4d7ed2a8a0	ramips: fixes XDXRN502J reset button ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41217	2014-06-16 18:54:53 +00:00
John Crispin	2fe435081d	ramips: add vlan configuration for asiarf awm002-evb ... Without this, the ports all end up on vlan 1. This enables a separate WAN port that works. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41216	2014-06-16 18:54:48 +00:00
John Crispin	ab390d6c05	ramips: restore AWM002-EVB profile in asiarf.mk ... In a recent revision (r41177) John Crispin removed the profile for the AsiaRF AWM002 eval board while adding another AsiaRF board. This patch restores AWM002 and also corrects a misspelling and an apparently errant reference to an Allnet ALL0239-3G device. Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41215	2014-06-16 18:54:42 +00:00
John Crispin	6d213a644d	ramips: add asiarf awapn2403 support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41177	2014-06-13 09:16:15 +00:00
Felix Fietkau	231f15c9db	ramips: fix rt2x00 handling of default packages for subtargets ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145	2014-06-11 17:01:19 +00:00
John Crispin	3306a4f9ab	ralink: fix asiarf/awm002 switch setup ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40939	2014-06-02 12:44:57 +00:00
John Crispin	7437d84814	ralink: add seama image can be upgrade by sysupgrade ... generate sysupgrade image by combine two images. one is kernel image with seama header. another is root fs image. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40922	2014-06-02 12:43:49 +00:00
John Crispin	f933a741a9	target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC ... ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915	2014-06-02 12:43:22 +00:00
John Crispin	712dec1027	ramips: add missing profile for DIR-615-D ... Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40911	2014-06-02 12:43:07 +00:00
John Crispin	9b728bebfb	ramips: fix not set lan/wan mac address ... The first switch case is default case. Then it will only match default case. cause not update the lan/wan mac address. And in the default switch case the param lan_mac is empty. it will case error message 'arithmetic syntax error' when call macaddr_add function. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40910	2014-06-02 12:43:04 +00:00
John Crispin	813a7c3827	ralink: Add support for samsung cy-swr1100 wireless router ... It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40908	2014-06-02 12:42:52 +00:00
John Crispin	efd09832fe	ramips: Support for Teltonika RUT5XX ... Hi Hartmut, Thanks for your feedback, I have reformated the patch accordingly. Added support for Teltonika RUT5XX hardware. Signed-off-by: Steffen Weinreich <steve@weinreich.org> SVN-Revision: 40907	2014-06-02 12:42:48 +00:00
John Crispin	583b908bc7	ralink: Enable Asus RT-N10+ in menuconfig targets ... This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk). Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org> SVN-Revision: 40903	2014-06-02 12:41:45 +00:00
John Crispin	4a7a0d2536	ralink: add dir-645 to the eeprom hotplug script ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40561	2014-04-23 07:52:56 +00:00
John Crispin	720a0a1df1	ramips: register clock device for the WMAC on RT3883 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40557	2014-04-23 07:51:57 +00:00
John Crispin	cd5f3584e2	ramips: Add support for the 7Links PX-4885 wireless router. ... The 7Links PX-4885 is a small battery-powered wireless router. It is based on a RT5350F WiSoC and features one ethernet port and one USB port. It is a Hame MPR-A1 clone, except it has different GPIOs, a different battery and more RAM (32 MB). This patch adds a profile for this board, the corresponding device tree file and the adequate base-files changes (incl. sysupgrade). Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> SVN-Revision: 40554	2014-04-22 08:08:51 +00:00
John Crispin	284ada8a3e	ramips: build factory-compatible image for AR725W ... Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40552	2014-04-22 08:08:42 +00:00
John Crispin	cb91087991	ramips: add Airlink101 AR725W userland support ... Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40550	2014-04-22 08:08:35 +00:00
John Crispin	2b2d274bfa	ramips: Add Airlink101 AR725W board support ... Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 40549	2014-04-22 08:08:31 +00:00
John Crispin	010dcd092f	ralink: add port_init for rt2880 ... Forgotten patch to fix ethernet for rt2880. Based on previously submitted patch from Claudio. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40504	2014-04-13 18:01:08 +00:00
John Crispin	7ae1d573ae	Fix Asus rt-n15 board support ... * gpio leds and buttons * ethernet Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40494	2014-04-12 21:22:04 +00:00
John Crispin	3d6ba83fe4	rt2880 DT fixes ... * add pinctrl * fix ethernet port * make wifi available by default Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40493	2014-04-12 21:22:00 +00:00
John Crispin	fa86c30538	Fix pinmux-rt2880 ... The last arg to FUNC() is count, not last pin. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40492	2014-04-12 21:21:56 +00:00
John Crispin	73160c1ad6	Add wmac clock for rt2880 ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40491	2014-04-12 21:21:53 +00:00
John Crispin	72803e0e27	Don't try to generate whr-g300n image if it's going to be more than 4M ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 40489	2014-04-12 21:21:44 +00:00
Gabor Juhos	d2812cb036	kernel: update 3.10 to 3.10.36 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467	2014-04-12 11:59:07 +00:00
John Crispin	f1e31f8266	ralink: fix WHR-300HP2 mtd size ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40419	2014-04-07 15:10:26 +00:00
Felix Fietkau	8f41856f1f	ramips: fix regression from r39949 (#15382) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40391	2014-04-06 00:09:50 +00:00
John Crispin	5b6ceab69b	ralink: fix chuncked-io module ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40342	2014-03-30 19:03:55 +00:00
Gabor Juhos	627baa28d3	kernel: update 3.10 to 3.10.34 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40291	2014-03-27 09:28:33 +00:00
John Crispin	4835ea949f	ralink: add missing OF node ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39950	2014-03-18 19:22:13 +00:00
John Crispin	332b94fbd5	ralink: refresh patches ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39949	2014-03-18 19:21:56 +00:00
John Crispin	375e02ac3d	ralink: add missing clk_set_rate() ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39896	2014-03-12 19:33:01 +00:00
John Crispin	96fa58bafd	ralink: add support for wrtnode ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39786	2014-03-07 09:54:59 +00:00
Gabor Juhos	f677b1bc7e	kernel: update 3.10 to 3.10.32 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39707	2014-02-23 10:59:40 +00:00
John Crispin	b56bef28d7	ralink: add support for na930 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39611	2014-02-18 13:33:25 +00:00
John Crispin	55383946dc	ralink: add gpio_uartf mux group ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39610	2014-02-18 13:33:20 +00:00
John Crispin	363512b8c6	ralink: fix the gpio mode mapping ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39609	2014-02-18 13:33:16 +00:00
Gabor Juhos	a2543d72d8	kernel: update 3.10 to 3.10.28 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39399	2014-01-26 11:30:34 +00:00
John Crispin	ebaa3817a7	ralink: activate xhci config ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39330	2014-01-19 17:27:31 +00:00
John Crispin	a818a3cf8f	ralink: backport various fixes from linux-mti ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39329	2014-01-19 17:27:22 +00:00
John Crispin	a75b692557	ralink: add xhci driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39328	2014-01-19 17:27:13 +00:00
John Crispin	f3a243c3dd	ramips: Add profile for the Edimax BR-6475nD ... Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39299	2014-01-15 18:29:51 +00:00
John Crispin	beb29461ff	ramips: Add userspace support for the Edimax BR-6475nD ... The rt2x00 wifi driver may still need updating to function with this device. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39298	2014-01-15 18:29:44 +00:00
John Crispin	62dd252b86	ramips: rt3883: Fix a typo in rt3883.dtsi ... Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39297	2014-01-15 18:29:03 +00:00
John Crispin	9821ce8ed6	ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39248	2014-01-12 17:26:24 +00:00
John Crispin	03ef20ce6f	ralink: fix eeprom loading ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39245	2014-01-12 14:03:15 +00:00
John Crispin	4282d796ea	ralink: fix WHR-600D and WHR-300HP image generation ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39241	2014-01-12 12:12:58 +00:00
John Crispin	a7f53759f5	ralink: fix WHR-600D pcie support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39240	2014-01-12 12:12:53 +00:00
John Crispin	3a64ddd0a1	ralink: add HLK-RM04 support ... https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39237	2014-01-12 12:07:40 +00:00
John Crispin	aa2be01076	ralink: switch to askconsole ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39236	2014-01-12 12:07:34 +00:00
John Crispin	665c51935e	ralink: fix uartf memory range size ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39235	2014-01-12 12:07:30 +00:00
John Crispin	6278a892d8	ralink: honour memory@0 node ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39234	2014-01-12 12:07:26 +00:00
John Crispin	0ac291d073	ralink: fix rt5350 ethernet ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39233	2014-01-12 12:07:20 +00:00
Gabor Juhos	0e2586a774	kernel: update 3.10 to 3.10.26 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39220	2014-01-11 16:06:37 +00:00
John Crispin	9715b61b3c	ralink: fix tso regression in the ethernet driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39168	2013-12-27 21:14:49 +00:00
John Crispin	9739a0b41b	ramips: add support for RT-N14U (mt7620n based) board ... added dts file and userspace scripts modified to support Asus RT-N14U board current support status: usb works ethernet works buttons reset, wps leds asus:blue:[usb|lan|wan|air|power] i2c not tested uart not tested wifi not yet Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 39163	2013-12-25 17:04:50 +00:00
John Crispin	93d8dc870e	ramips: add gpio pin 72 in mt7620 chips to dtsi files ... describes register set to control last gpio pin on mt7620 platfrom Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 39162	2013-12-25 17:04:34 +00:00
John Crispin	6218da5a41	ralink: fix dir810 networking ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39093	2013-12-16 10:16:33 +00:00
Hauke Mehrtens	952db22551	kernel: update kernel 3.10 to 3.10.24 ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39059	2013-12-15 19:16:30 +00:00
John Crispin	b4b0a55aab	ralink: add mt7621 support ... there are still various missing pieces for full support. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39040	2013-12-13 10:53:34 +00:00
John Crispin	0ef939c93b	ralink: add TSO ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39019	2013-12-09 17:29:29 +00:00
John Crispin	09a933ed73	ralink: fix typo in gpio irq handling ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39018	2013-12-09 17:29:24 +00:00
John Crispin	a65c9e5b20	ralink: add mt7620a gdma info to dtsi ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39017	2013-12-09 17:29:19 +00:00
John Crispin	d203784841	ralink: add asoc modules ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39016	2013-12-09 17:29:14 +00:00
John Crispin	be10895651	ralink: add partially working asoc driver. codec is not fully functional yet ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39015	2013-12-09 17:29:08 +00:00
John Crispin	231eca9375	ralink: add helper that identifies the mt7620 ECO ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39014	2013-12-09 17:29:03 +00:00
John Crispin	833943b410	ralink: add dma engine support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39013	2013-12-09 17:28:43 +00:00
Gabor Juhos	f1ef0b92be	kernel: update 3.10 to 3.10.21 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38972	2013-12-01 09:59:53 +00:00
John Crispin	2370126b9b	ramips: Fix initial network configuration for few boards ... Argus ATP52B: ethernet didn't work because of unconfigured switch Sparklan WCR150GN: add switch config and make single port to be LAN Dlink DIR-645: seems to be a redundant case Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 38960	2013-11-30 08:36:56 +00:00
John Crispin	f8fe6a090a	ramips: Fix dts typos ... Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 38959	2013-11-30 08:36:47 +00:00
John Crispin	bb2b428a5c	ralink: dts fixes ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38917	2013-11-26 09:51:57 +00:00
John Crispin	6295f38c8f	ralink: add mac address detection for Asus RT-G32 b1 ... http://patchwork.openwrt.org/patch/4463/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38910	2013-11-25 14:09:08 +00:00
John Crispin	93e9a71538	base-files: allow users to delect debug level during boot ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38909	2013-11-25 08:34:55 +00:00
John Crispin	8ee2b91ddd	ralink: fix up the mt7530 driver to work properly with gmac2 ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38905	2013-11-25 08:34:23 +00:00
John Crispin	d84238ad26	ralink: add LRO support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38904	2013-11-25 08:34:12 +00:00
John Crispin	f732ed4500	ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38903	2013-11-25 08:34:01 +00:00
John Crispin	5b437e204f	ralink: set the mac addr via the dts file ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38902	2013-11-25 08:33:42 +00:00
John Crispin	d175740783	ralink: set wmr-300 mac properly ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38872	2013-11-19 21:13:24 +00:00
John Crispin	40109bb89b	ralink: add missing CONFIG_ symbol to mt7620n ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38867	2013-11-19 16:33:43 +00:00
John Crispin	82e6242798	ralink: add support for ralink mt7620 nand eval board ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38848	2013-11-18 09:35:41 +00:00
John Crispin	a17e5159ac	ralink: improve mt7620n detection ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38847	2013-11-18 09:35:32 +00:00
John Crispin	f307b35c8b	ralink: add mt7620 nand driver ... This is a minor rework of the SDK driver. This driver needs a full rewrite. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38846	2013-11-18 09:35:23 +00:00
John Crispin	9d4eb0ac91	ralink: make all none 3x5x boards default to a vlan1/2 setup ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38845	2013-11-18 09:35:14 +00:00
John Crispin	3d547b740a	ralink: make usb work on the mt7530 eval kit ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38844	2013-11-18 09:34:46 +00:00
John Crispin	269cbfa06a	ralink: add mt7620n dts files ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38829	2013-11-17 13:22:01 +00:00
John Crispin	5c2e867460	ramips: fix wmr300 network detection ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38828	2013-11-17 13:14:46 +00:00
John Crispin	dce9b292bf	ralink: add mt7620n support ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38823	2013-11-16 20:28:52 +00:00
Felix Fietkau	9aca892304	ramips: use dd bs=4096k instead of bs=4M to make it more portable ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38806	2013-11-14 19:16:04 +00:00
Felix Fietkau	682e134b02	ramips: select kmod-rt2800-soc by default (if available) ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38784	2013-11-13 10:29:10 +00:00
John Crispin	191af20982	ramips: use gpio-button-hotplug in favour of the input variant ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38735	2013-11-11 13:40:20 +00:00
John Crispin	33111eff95	ramips: make the rfkill switch work on fonera20n ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38734	2013-11-11 13:40:17 +00:00
John Crispin	3de4bdc36f	ralink: revert 38348 as it breaks network on the hame-mpr ... https://dev.openwrt.org/changeset/38348 https://dev.openwrt.org/ticket/14403#comment:1 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38669	2013-11-07 12:45:52 +00:00
John Crispin	4bb29e9df6	ralink: fix c&p error in gpio driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38668	2013-11-07 12:45:48 +00:00
Gabor Juhos	35656042f1	kernel: update 3.10 to 3.10.18 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38652	2013-11-05 08:25:45 +00:00
Gabor Juhos	379b509362	ramips: enable building of TEW-692GR images ... The TEW-692GR images are missing since r36169. Uncomment the board specific macro in image/Makefile, in order to generate those again. Only build tested. No idea if the the image works or not, I have bricked my TEW-692GR a few months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38603	2013-10-30 07:06:24 +00:00
Gabor Juhos	dfd4311355	ramips: fix number of GPIOs for RT3352 ... The RT3352 SoC only supports 46 GPIO lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38602	2013-10-30 07:06:23 +00:00
Gabor Juhos	9186fb342e	ramips: remove trailing whitespaces from .dts{,i} files ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38601	2013-10-30 07:06:22 +00:00
John Crispin	176b41d441	ralink: add package for mt7620 sdhci ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38553	2013-10-28 06:47:56 +00:00
John Crispin	36e029b3eb	ralink: dont include mt7620 sdhci support inside the kernel ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38552	2013-10-28 06:47:48 +00:00
John Crispin	7c7225a19d	ralink: add support for missing mt7620 mux values ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38551	2013-10-28 06:47:39 +00:00
John Crispin	43de7c1cfa	ralink: add support for 2 new mt7620 boards made by buffalo ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38550	2013-10-28 06:47:31 +00:00
John Crispin	849f74f930	ralink: pinctrl fix for non muxed pins ... Pins with no mux option failed to be recognized as gpios. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38540	2013-10-26 12:24:55 +00:00
Gabor Juhos	b6b06000eb	kernel: update 3.10 to 3.10.17 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506	2013-10-23 12:51:05 +00:00
John Crispin	9a97c56535	ralink: fix default vlan mapping for MT7620a_MT7610e ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38418	2013-10-15 14:56:49 +00:00
Hauke Mehrtens	81e2f00367	kernel: update kernel to 3.10.15 ... Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38384	2013-10-13 19:28:29 +00:00
John Crispin	b93e5498ae	ralink: fixes mpr a1/a2 network setup ... Signed-off-by: Suschman <suschman@gmx.net> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38348	2013-10-09 10:08:52 +00:00
John Crispin	e382d2c7e6	ralink: add support for the mt7530 eval board ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38345	2013-10-08 21:10:15 +00:00
John Crispin	697bb191b0	ralink: add missing header file to mt7530 driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38344	2013-10-08 21:10:00 +00:00
John Crispin	c903de043e	ralink: fix asiarf image generation ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38324	2013-10-07 15:02:44 +00:00
John Crispin	ddcb800018	ralink: split mt7530 driver out of the gsw driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38323	2013-10-07 15:02:39 +00:00
John Crispin	c077698e38	ralink: build recovery images for dcs930 ip cam ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38322	2013-10-07 15:02:35 +00:00
John Crispin	420c62205b	ralink: DIR610A1 Fix remaining issues ... This patch fixes: - Ethernet and Wireless LEDs - Wireless MAC Address - Remove whitespaces from dts file Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 38321	2013-10-07 15:02:31 +00:00
John Crispin	5eacfc1c60	ralink: MT7620 eval board pinmux fixes ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38320	2013-10-07 15:02:27 +00:00
John Crispin	cc58dd26d3	ralink: make cevt systick selectable via kconfig ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38319	2013-10-07 15:02:23 +00:00
John Crispin	baf9d53792	ralink: fix mt7620a pinmux ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38318	2013-10-07 15:02:18 +00:00
John Crispin	65bb48cf23	ralink: dts fixes ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38265	2013-09-30 20:48:39 +00:00
John Crispin	52fe1211b3	ralink: fix DIR-320-B1 board detection ... https://dev.openwrt.org/ticket/14226 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38264	2013-09-30 20:48:34 +00:00
John Crispin	396cb4f405	ralink: Change size of image for DIR-320 B1 to 8MB ... http://patchwork.openwrt.org/patch/4102/ Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru> SVN-Revision: 38263	2013-09-30 20:48:27 +00:00
Gabor Juhos	9c8a5ef115	kernel: update 3.10 to 3.10.13 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38228	2013-09-27 07:19:21 +00:00
Felix Fietkau	a30681dff0	build: unify mips target cflags ... Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38210	2013-09-26 17:53:14 +00:00
Gabor Juhos	0380904acb	kernel/3.10: refresh all target patches ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38182	2013-09-25 17:13:24 +00:00
Gabor Juhos	76a1617063	ramips: sync 3.10 configs ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38181	2013-09-25 16:39:23 +00:00
John Crispin	08abb8822b	ralink: make dcs930 uvc camera work ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38054	2013-09-19 05:57:00 +00:00
John Crispin	c0f6bf05f4	ralink: add support for dalink dcs930l ipcam ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38053	2013-09-19 05:56:46 +00:00
John Crispin	898c164b46	ralink: add back dwc_otg driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38052	2013-09-19 05:56:31 +00:00
John Crispin	5722b32acf	ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350 ... https://dev.openwrt.org/ticket/14129 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38040	2013-09-18 16:31:37 +00:00
John Crispin	8cd1c99707	ralink: add pinctrl driver ... Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38026	2013-09-17 21:45:44 +00:00
John Crispin	66bed0b019	ralink: change subtarget order ... this will make image builder build rt305x targets per default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38025	2013-09-17 21:45:39 +00:00
Gabor Juhos	a0d6cd4f49	kernel/3.10: add new Kconfig option for firmware partition split ... Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38002	2013-09-15 17:03:29 +00:00
Gabor Juhos	554772a665	kernel: update 3.10 to 3.10.12 ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38000	2013-09-15 16:00:41 +00:00